TODIM Method for Single-Valued Neutrosophic Multiple Attribute Decision Making

Recently, the TODIM has been used to solve multiple attribute decision making (MADM) problems. The single-valued neutrosophic sets (SVNSs) are useful tools to depict the uncertainty of the MADM. In this paper, we will extend the TODIM method to the MADM with the single-valued neutrosophic numbers (SVNNs). Firstly, the definition, comparison, and distance of SVNNs are briefly presented, and the steps of the classical TODIM method for MADM problems are introduced. Then, the extended classical TODIM method is proposed to deal with MADM problems with the SVNNs, and its significant characteristic is that it can fully consider the decision makers’ bounded rationality which is a real action in decision making. Furthermore, we extend the proposed model to interval neutrosophic sets (INSs). Finally, a numerical example is proposed.

In order to depict the increasing complexity in the actual world, the DMs' risk attitudes should be taken into consideration to deal with MADM [68][69][70].Based on the prospect theory, Gomes and Lima [71] established TODIM (an acronym in Portuguese for Interactive Multi-Criteria Decision Making) method to solve the MADM problems with the DMs' psychological behaviors are considered.Some scholars have paid attention to depict the DMs' attitudinal characters in the MADM [72][73][74].Also, some scholars proposed fuzzy TODIM models [75,76], intuitionistic fuzzy TODIM models [77,78], the Pythagorean fuzzy TODIM approach [68], the multi-hesitant fuzzy linguistic TODIM approach [79,80], the interval type-2 fuzzy TODIM model [81], the intuitionistic linguistic TODIM method [82], and the 2-dimension uncertain linguistic TODIM method [83].However, there is no scholar to investigate the TODIM model with SVNNS.Therefore, it is very necessary to pay abundant attention to this novel and worthy issue.The aim of this paper is to extend the TODIM idea to solve the MADM with the SVNNs, to fill up this vacancy.In Section 2, we give the basic concepts of SVNSs and the classical TODIM method for MADM problems.In Section 3, we propose the TODIM method for SVN MADM problems.In Section 4, we extend the proposed SVN TODIM method to INNs.In Section 5, an illustrative example is pointed out and some comparative analysis is conducted.We give a conclusion in Section 6.

Preliminaries
Some basic concepts and definitions of NSs and SVNSs are introduced.

NSs and SVNSs
Definition 1 [39,40].Let X be a space of points (objects) with a generic element in fix set X, denoted by x.NSs A in X is characterized by a truth-membership function T A (x), an indeterminacy-membership I A (x) and a falsity-membership function F A (x), where T A (x) The NSs was difficult to apply to real applications.Wang [32] develop the SNSs.
Definition 2 [32].Let X be a space of points (objects); a SVNSs A in X is characterized as the following: where the truth-membership function T A (x), indeterminacy-membership I A (x) and falsity-membership function For convenience, a SVNN can be expressed to be A = (T A , I A , F A ), Definition 3 [50].Let A = (T A , I A , F A ) be a SVNN, a score function S(A) is defined: Definition 4 [50].Let A = (T A , I A , F A ) be a SVNN, an accuracy function H(A) of a SVNN is defined: to evaluate the degree of accuracy of the SVNN A = (T A , I A , F A ), where H(A) ∈ [−1, 1] .The larger the value of H(A) is, the higher the degree of accuracy of the SVNN A.
Zhang et al. [50] gave an order relation between two SVNNs, which is defined as follows: Definition 5 [50].Let A = (T A , I A , F A ) and B = (T B , I B , F B ) be two SVNNs, if S(A) < S(B), then A < B; if S(A) = S(B), then Definition 6 [32].Let A and B be two SVNNs, the basic operations of SVNNs are: Definition 7 [42].Let A and B be two SVNNs, then the normalized Hamming distance between A and B is:

The TODIM Approach
The TODIM approach [71], developed to consider the DM's psychological behavior, can effectively solve the MADM problems.Based on the prospect theory, this approach depicts the dominance of each alternative over others by constructing a function of multi-attribute values [69]. Let and where a ij is given for the alternative Then the traditional TODIM model concludes the following computing steps: Step 1. Normalizing A = a ij m×n into B = b ij m×n .
Step 2. Computing the dominance degree of A i over every alternative A t under attribute G j : where and the parameter θ shows the attenuation factor of the losses.
Step 3. Deriving the overall dominance value of A i by the Equation (7): Step 4. Ranking all alternatives and selecting the most desirable alternative in accordance with φ(A i ).The alternative with minimum value is the worst.Inversely, the maximum value is the best one.

TODIM Method for SVN MADM Problems
T ij , I ij , F ij m×n be a SVN matrix, where r ij = T ij , I ij , F ij , which is an attribute value, given by an expert, for the alternative To solve the MADM problem with single-valued neutrosophic information, we try to present a single-valued neutrosophic TODIM model based on the prospect theory and can depict the DMs' behaviors under risk.
Firstly, we calculate the relative weight of each attribute G j as: where w j is the weight of the attribute of G j , w r = max Based on the Equation ( 8), we can derive the dominance degree of A i over each alternative A t with respect to the attribute G j : where the parameter θ shows the attenuation factor of the losses, and d r ij , r tj is to measure the distances between the SVNNs r ij and r tj by Definition 7. If r ij > r tj , then φ j (A i , A t ) represents a gain; if r ij < r tj , then φ j (A i , A t ) signifies a loss.For indicating functions φ j (A i , A t ) clearly, a dominance degree matrix φ j = φ j (A i , A t ) m×m under G j is expressed as: (11) On the basis of Equation ( 11), the overall dominance degree δ(A i , A t ) of the A i over each A t can be calculated: Thus, the overall dominance degree matrix δ = [δ(A i , A t )] m×m can be derived by Equation ( 12): Then, the overall value of each A i can be calculated Equation ( 14): Also the greater the overall value δ(A i ), the better the alternative A i .
In general, single-valued neutrosophic TODIM model includes the computing steps: (Procedure one) Step 1. Identifying the single-valued neutrosophic matrix R = r ij m×n = T ij , I ij , F ij m×n in the MADM, where r ij is a SVNN.
Step 2. Calculating the relative weight of G j by using Equation (8).
Step 3. Calculating the dominance degree φ j (A i , A t ) of A i over each alternative A t under attribute G j by Equation ( 9).
Step 4. Calculating the overall dominance degree δ(A i , A t ) of A i over each alternative A t by using Equation ( 12).Step 5. Deriving the overall value δ(A i ) of each alternative A i using Equation (14).
Step 6. Determining the order of the alternatives in accordance with δ
Definition 8 [33].Let X be a space of points (objects) with a generic element in fix set X, an INSs A in X is characterized as follows: A = x, T A (x), where truth-membership function T A (x), indeterminacy-membership I A (x) and falsity-membership function F A (x) are interval values, T A (x) ⊆ [0, 1], I A (x) ⊆ [0, 1] and F A (x) ⊆ [0, 1], and 0 ≤ sup T A (x) + sup I A (x) + sup F A (x) ≤ 3.

An interval neutrosophic number (INN) can be expressed as
and Definition 9 [84].
A be an INN, a score function S of an INN can be represented as follows: Definition 10 [84].
Tang [84] defined an order relation between two INNs.
be the scores, and H A = be the accuracy function, then if S A < S B , then A < B ; if S A = S B , then Definition 12 [33,61].
be two INNs, and some basic operations on them are defined as follows: (1) (2) Definition 13 [84].
is defined as follows: Let A, G and w be presented as in Section 3. Suppose that R = r ij m×n = is the interval neutrosophic decision matrix, where To cope with the MADM with INNs, we develop interval neutrosophic TODIM model.Firstly, we calculate the relative weight of each attribute G j as: where w j is the weight of the attribute of G j , w r = max w j |j = 1, 2, • • • , n , and 0 ≤ w jr ≤ 1.
Based on the Equation (20), we can derive the dominance degree of A i over each alternative A t with respect to the attribute G j : where the parameter θ shows the attenuation factor of the losses, and d r ij , r tj is to measure the distances between the INNs r ij and r tj by Definition 13.If r ij > r tj , then φ j (A i , A t ) represents a gain; if r ij < r tj , then φ j (A i , A t ) signifies a loss.For indicating functions φ j (A i , A t ) clearly, a dominance degree matrix φ j = φ j (A i , A t ) m×m under G j is expressed as: On the basis of Equation ( 22), the overall dominance degree δ(A i , A t ) of the A i over each A t can be calculated: Thus, the overall dominance degree matrix δ = [δ(A i , A t )] m×m can be derived by Equation ( 23): Then, the overall value of each A i can be calculated Equation (25): Also the greater the overall value δ(A i ), the better the alternative A i .
In general, interval neutrosophic TODIM model includes the computing steps: (Procedure two) Step 1.
in the MADM, where r ij is an INN.
Step 2. Calculating the relative weight of G j by using Equation (19).
Step 3. Calculating the dominance degree φ j (A i , A t ) of A i over each alternative A t under attribute G j by Equation (20).
Step 4. Calculating the overall dominance degree δ(A i , A t ) of A i over each alternative A t by using Equation (23).
Step 5. Deriving the overall value δ(A i ) of each alternative A i using Equation (25).

Numerical Example 1
In this part, a numerical example is given to show potential evaluation of emerging technology commercialization with SVNNs.Five possible emerging technology enterprises (ETEs) A i (i = 1, 2, 3, 4, 5) are to be evaluated and selected.Four attributes are selected to evaluate the five possible ETEs: 1 G 1 is the employment creation; 2 G 2 is the development of science and technology; 3 G 3 is the technical advancement; and 4 G 4 is the industrialization infrastructure.The five ETEs A i (i = 1, 2, 3, 4, 5) are to be evaluated by using the SVNNs under the above four attributes (whose weighting vector ω = (0.2, 0.1, 0.3, 0.4) T ), as listed in the following matrix.

Comparative Analysis 1
In what follows, we compare our proposed method with other existing methods including the SVNWA operator and SVNWG operator proposed by Sahin [85] as follows: Definition 14 [85].
By utilizing the R, as well as the SVNWA and SVNWG operators, the aggregating values are derived in Table 1.According to the aggregating results in Table 1, the score functions are listed in Table 2.According to the score functions shown in Table 2, the order of the emerging technology enterprises are in Table 3.
Table 3. Order of the emerging technology enterprises.
From the above analysis, it can be seen that two operators have the same best emerging technology enterprise A 2 and two methods' ranking results are slightly different.However, the SVN TODIM approach can reasonably depict the DMs' psychological behaviors under risk, and thus, it may deal with the above issue effectively.This verifies the method we proposed is reasonable and effective in this paper.

Comparative Analysis 2
In what follows, we compare our proposed method with other existing methods including the INWA operator and INWG operator proposed by Zhang et al. [50] as follows: Definition 15 [50].
By utilizing the decision matrix R, and the INWA and INWG operators, the aggregating values are in Table 4.According to the aggregating values in Table 4, the score functions are in Table 5.According to the score functions shown in Table 5, the order of the emerging technology enterprises are in Table 6.From the above analysis, it can be seen that two operators have the same best emerging technology enterprise A 2 and two methods' ranking results are slightly different.However, the interval neutrosophic TODIM approach can reasonably depict the DMs' psychological behaviors under risk, and thus, it may deal with the above issue effectively.This verifies the method we proposed is reasonable and effective.

Conclusions
In this paper, we will extend the TODIM method to the MADM with the single-valued neutrosophic numbers (SVNNs).Firstly, the definition, comparison and distance of SVNNs are briefly presented, and the steps of the classical TODIM method for MADM problems are introduced.Then, the extended classical TODIM method is proposed to deal with MADM problems with the SVNNs, and its significant characteristic is that it can fully consider the decision makers' bounded rationality which is a real action in decision making.Furthermore, we extend the proposed model to interval neutrosophic sets (INSs).Finally, a numerical example is proposed to verify the developed approach.

Table 1 .
The aggregating values of the emerging technology enterprises by the SVNWA (SVNWG) operators.

Table 2 .
The score functions of the emerging technology enterprises.

Table 4 .
The aggregating values of the emerging technology enterprises by the INWA and INWG operators.

Table 5 .
The score functions of the emerging technology enterprises.

Table 6 .
Order of the emerging technology enterprises.