Effect of IoT Capabilities and Energy Consumption behavior on Green Supply Chain Integration

: The Internet of Things (IoT) is the next generation of internet-connected information communication technologies (ICT). IoT typically integrates supply chain activities to enhance green supply chain performance (GSCP). Since every organization has different IoT capabilities in comparison with other organizations, GSCP can enable supply chain integration activities for enhanced performance. The implementation of an IoT system can reduce the consumption of organizational resources like energy, electricity, and time and can increase the operational speed to gain better logistics and, ultimately, improved supply chain performance. This study has developed and empirically tested the relationship between IoT capabilities, energy consumption behavior (ECB), supply chain integration, green training (GT), and supply chain practices. Such a multidisciplinary relationship has not previously been established in the literature. The proposed study can fulﬁll the literature gap and opens new horizons for interdisciplinary research. Data used in this study are collected through ofﬂine and online survey methods. A total number of 250 out of 400 respondents participated in the survey. Data has been analyzed through partial least square—structure equation modeling (PLS—SEM) technique. The results of this study empirically test the developed model. IoT has a positive effect on supplier integration (SI), and customer integration (CI). Furthermore, SI and CI have a mediating role between IoT and GSCP, and GT has a positive impact on GSCP. It is concluded that the implementation of IoT can integrate CI and SI to increase GSCP. GT and ECB can ultimately improve GSCP. Additionally, the use of technology and GT can motivate employees to save energy and protect the environment to increase GSCP.


Introduction
Internet of Things (IoT) is a prominent innovation in the field of information and communication technologies where IoT can connect different devices through the internet [1]. IoT can interlink different devices (such as sensors, networking devices, and vehicles) through different software to share their real-time data through the internet [2]. IoT also provides a platform to interlink different

Resource-Based Theory (RBT)
Resource-based theory is a managerial framework typically used to determine the strategic resources with the potential to deliver comparative advantage to a firm [12]. Competitive advantage is the ultimate objective of every organization and can be achieved through environmental scanning and matching the environment with organizational resources. The competitive behavior of organizations does not depend on only the external factors [13], but is the result of both the internal and external factors. The internal factors of an organization are their resources and capabilities. Resources are the value-creating strategies. Overall, RBT is the combination of different and unique collections of an organization's tangible and intangible resources and capabilities [14].
For every organization, resources and products are two different sides of the same coin. In this competitive era, organizations need to develop a focus on both resources and products at the same time to gain a sustainable competitive advantage. This is because most of the products require services that are based on resources and most of the time services require products. Therefore, it is difficult to separate both. A resource product matrix has also been developed in previous studies [15]. Here, the key to success is to understand and concentrate on both products and resources at the same time to gain a sustainable competitive advantage [16]. In this study, IoT and GT are identified as having firm capabilities to enhance the supply chain integration and GSCP of an organization.

Contingency Theory
Contingency theory [17,18] claims that there is no perfect theory, method, or way to manage organizations or to make decisions. The contingency approach employs the reductionist approach as it suggests that organizational processes and methods should be divided into different independent processes, methods, and departments [19]. Therefore, organizations need to align their processes and methods to the environment. Moreover, the optimal decision can be affected by the internal and external environment to maximize organizational performance [20,21]. In the supply chain context, management, customers, and suppliers are the most crucial environmental elements in a manufacturing environment.
Structural contingency theory [17,22,23] develops the relationship between organizational strategy and organizational performance. If an organizational strategy fits in its organizational design and structure, then organizations can thrive and perform their operations efficiently. The structural contingency theory has focused on strategic management literature because it provides guidelines to align organizational structure, design, and strategy to maximize organizational performance [24][25][26]. Contingency theory allows individual partners of the supply chain to align their activities with each other to achieve SCP.

Internet of Things
In business management literature, IoT is used to facilitate organizations' modern needs [27,28]. IoT can enable organizations to align their resources on a single platform and track all their processes and activities efficiently [11,27]. In supply chain management, IoT has practical implications. It can be used to track products, maintain inventory, keep a record of buyers and suppliers, reduce theft and mishandling, in addition to many other benefits. Nowadays, most of the organizations have their own customized software to integrate their activities and to align their customers, suppliers, and team members, for sharing information, enhancing communication, and to smooth organizational activities. The supply chain ranges from traditional inventory registers and activities to a computerized system. Finally, IoT systems based on barcode scanners and RFID technology enable people to track, monitor, record, and analyze inventory details. This is achieved only due to IoT applications in the supply chain and to enhance the supply chain performance [29,30].
In this study, the relationship between IoT and SI and IoT and CI has been established. Since IoT can enable both suppliers and customers to integrate with the manufacturer, it can also help to enhance the interaction between manufacturer and supplier to understand the needs of the manufacturer, production planning, and inventory level. The manufacturer can order online or via email using information and communication technologies or with the use of IoT to order the products according to a product's design and its cost. All in all, IoT can positively affect SI, which can lead to GSCP [11,27]. In the same way, IoT also affects CI, since IoT can enable customers to interact and communicate with the manufacturers. IoT can also facilitate customers to book their products online and check the specification of products by using the internet. Furthermore, the customer can track their products in real time. Customers can get in contact with the manufacturer and can subsequently develop a strong relationship. This can result in customer satisfaction, loyalty, and the reordering of products from the same manufacturer which can result in certain manufacturers having a competitive advantage and improved financial performance. Therefore, the use of IoT can increase customer interaction, and CI can lead to enhanced supply chain performance and GSCP [11,27].

Energy Consumption Behavior
Energy consumption behavior explains the emotional and behavioral attitude of individuals, groups, and organizations toward utilizing energy resources for the planning, production, and delivery of products and services [31]. Also, energy consumption behavior can be observed at individual and institutional levels while using different appliances like computers, electric lights, fans, air conditioners, heating equipment for buildings, and even the use of cars and other vehicles for personal and organizational purposes. Moreover, energy consumption behavior is the overall attitude regarding the use of any energy resources to gain personal, procedural, or economic benefits [32]. In this study, the relationship between IoT, energy consumption behavior and SI, and CI is investigated to enhance GSCP. IoT can motivate individuals and organizations to save energy by consuming less energy, either through electrical appliances, transportation, or energy consumption material, and to increase economic performance [32].
There are different types of energy that can be consumed at homes and institutions. The most crucial energy type is electricity. It is important to save electricity through the use of energy-efficient appliances. Nowadays, organizations are producing energy-efficient devices such as refrigerators, air conditioners, electric lights, computers, and many others. Since customers are currently demanding energy-efficient products to save electricity, this can result in protecting the environment and reducing the electricity bills on an individual as well as an institutional level. Furthermore, hydrogen fuel cell cars and liquid fuel transportation can save energy in the transportation sector. The ultimate goal is to save energy and to protect the environment while also saving costs to gain economic benefits [33].
Energy resources are limited around the world, with developing countries especially, such as Pakistan, facing serious energy shortages for many years. The recent energy crises have created an awareness in society to conserve energy. The awareness brings innovation to electrical appliances to save electricity. Organizations introduce new products that can work using batteries or less power [34]. Furthermore, organizations highlighted this innovation to attract their customers with the potential of lower electricity consumption and cost-saving benefits. The innovative products can prove to be more effective compared to traditional products [34,35].
Presently, organizations and individuals are producing energy for their needs via personal means. Nowadays, many organizations are also using solar energy. In countries like Pakistan, a shortage of electricity also encourages the householders to produce electricity through solar energy directly from the Sun or generate electricity through power generators. Such generation, storage, and utilization of self-produced electricity also reduces the demand for electricity from the government or private sectors and can also lessen the burden and reduce the shortage of electricity. Furthermore, such awareness can also change the energy consumption behavior of individuals and organizations [34,35].

Supply Chain Integration
In supply chain management literature, SCI is a new concept compared to the relationship between a manufacturer, supplier, and customer that is very established. However, this collaborative relationship is found to be unidimensional in the literature [36][37][38][39]. Moreover, a few studies have focused on the dynamic relationship between supply chain partners [40]. Furthermore, a few studies have considered the supply chain as a single system, instead of dividing the supply chain into different subsystems [41][42][43][44][45][46]. SCI reflects the flow of material and parts from one supply chain component to another [47]. Some authors suggest that SCI is a flow of cash, resources, and information in supply chain subsystems. However, in the previous literature, the strategic nature of SCI has been ignored. SCI can be divided into two dimensions of internal integration with manufacturers and external integration with suppliers and customers. However, external integration can be in both directions [41].
Integration can be implemented in the supply chain as the strategic process for collaboration with other supply chain partners to allow the flow of information and resources that can manage inter-organizational and intra-organizational processes and make organizational processes smoother. The ultimate goal of SCI is the flow of information, resources, money, products, and services to serve customers more effectively and efficiently and to result in speedy organizational processes and reduce operational costs [41,43,48,49]. SCI encourages supply chain partners to strategically collaborate. It can provide operational and strategic benefits [50]. SCI also motivates supply chain partners to share information, reduce supply chain risks, and increase contract duration and trust [51][52][53]. SCI highlights the importance of inter-and intra-organizational processes and their outcomes to achieve operational and organizational performance since the primary objective of SCI is customer satisfaction.
Customer and supplier integrations are typically considered as external integrations. CI and SI both can develop the strategic relationship between a manufacturer, supplier, and customer to develop inter-organizational strategies, processes, practices, and collaboration [54]. CI involves the competencies, practices, and coordination of critical customers, whereas, SI is related to competencies, practices, and integration with critical suppliers [48]. Both CI and SI can interact with customers and suppliers whereas a manufacturer can interact efficiently and synchronize processes to fulfill the requirements of their customers [41,[55][56][57].

Customer and Supplier integration to Performance
Structural contingency theory explains that an organization's structure, design, methods, and strategies can fit with the external environment. In manufacturing, suppliers and customers are crucial elements of the external environment. In the supply chain, the manufacturer should develop, select, and implement strategies for their internal and external environment to achieve operational and organizational performance [58][59][60]. Therefore, organizations must respond to their internal (within the organization) and external environments (customer and suppliers) through organizational strategies to smooth organizational performance [41].
A stronger relationship between a customer and a manufacturer not only makes their customers loyal to them but it also enables an organization to understand the needs of their customers through information sharing. A manufacturer can forecast the demands, product design, production planning time, cost, inventory level, and customer needs. As long as a manufacturer and a customer have a close relationship with each other they can share information. So, CI can help a manufacturer to become customer-oriented through collaboration and information sharing to enhance operational, SCP, and organizational performance [11,41].
CI typically provides opportunities of leveraging the intelligence in the collaborative process as it enables an organization to understand its customers, create greater values for their customers, reduce costs, and allows for an understanding of the rapid change in customers' demands, market turbulence, and competitive strategies. CI can enhance the customers' satisfaction level as customers' views are involved in the planning, product design, and delivery processes and as a manufacturer takes information and feedback from its customers directly. Furthermore, customers also participate in product innovation and product development indirectly [61,62]; however, the ultimate goal of CI is customer satisfaction [63].
Supplier and manufacturer integration can develop a strategic collaboration between a supplier and a manufacturer. SI can enable a supplier to anticipate and understand the needs of its manufacturer and also to predict the rapid change in a manufacturers' demands. SI motivates a manufacturer and a supplier to share information, understand the manufacturers' capabilities, develop production plans, and to develop product delivery process, time, and costs. Therefore, SI plays a major role in planning, production, delivery, and services to achieve operational performance [11,41].
SI not only strengthens the relationship between a manufacturer and a supplier but it also improves the customer's satisfaction level, customer services, and customer loyalty since SI is directly related to product planning, product manufacturing, and product performance [64][65][66]. Furthermore, SI can enhance the communication between a supplier and a manufacturer to improve operational and organizational performance [54][55][56][57][58][59][60][61][62][63][64][65][66][67]. Additionally, SI can also improve communication, exchange information, strengthen the relationship, participate in planning, production capabilities, and inventory management to enhance operational and organizational performance. Therefore, both customer and supplier integration can enhance operational, supply chain, and organizational performance [11,41].

Green Training
Green human resource management practices are emerging trends in human resource management. Green human resource management practices have a positive effect on operational performance and GSCP [67,68]. Therefore, green training can create green awareness and environmentally friendly thinking among employees through green education, which can be implemented in the organizations [69]. With reference to the literature on green human resource management, GT can develop environmental understanding at all levels of employees (from top, senior, middle, to lower level) in an organization. Furthermore, employees can implement their green knowledge into their operational activities. GT can enable organizations to integrate their routine activities to green practices and play their role to protect the environment. So, the ultimate goal of GT is to achieve environmental performance [70,71].
In GT literature, it is highlighted that GT has a positive impact on greening the organization because GT enables all the employees to think about and move towards greener practices. Therefore, GT can lead to improving the green practices in the organization at all levels. Furthermore, GT also focuses on developing green teams in an organization to achieve environmentally friendly practices in an organization [72]. In Spain, GT-motivated organizations are focusing on advanced green practices and on protecting the environment and contributing to environmental performance [73].
In this study, GT was considered the moderated variable between SI, CI, and GSCP because both customers and suppliers are moving toward and demanding environmentally friendly production methods that can lead to economic and operational performance [74,75]. The relationship between GT and GSCP is also established in the previous study. Moreover, this study focuses on motivating suppliers to supply green raw material to a manufacturer and motivates a manufacturer to implement green production methods which can lead to a safe environment and bring economic performance and GSCP.
Based on the above literature, the proposed research model is shown in Figure 1.

Green Training
Green human resource management practices are emerging trends in human resource management. Green human resource management practices have a positive effect on operational performance and GSCP [67,68]. Therefore, green training can create green awareness and environmentally friendly thinking among employees through green education, which can be implemented in the organizations [69]. With reference to the literature on green human resource management, GT can develop environmental understanding at all levels of employees (from top, senior, middle, to lower level) in an organization. Furthermore, employees can implement their green knowledge into their operational activities. GT can enable organizations to integrate their routine activities to green practices and play their role to protect the environment. So, the ultimate goal of GT is to achieve environmental performance [70,71].
In GT literature, it is highlighted that GT has a positive impact on greening the organization because GT enables all the employees to think about and move towards greener practices. Therefore, GT can lead to improving the green practices in the organization at all levels. Furthermore, GT also focuses on developing green teams in an organization to achieve environmentally friendly practices in an organization [72]. In Spain, GT-motivated organizations are focusing on advanced green practices and on protecting the environment and contributing to environmental performance [73].
In this study, GT was considered the moderated variable between SI, CI, and GSCP because both customers and suppliers are moving toward and demanding environmentally friendly production methods that can lead to economic and operational performance [74,75,]. The relationship between GT and GSCP is also established in the previous study. Moreover, this study focuses on motivating suppliers to supply green raw material to a manufacturer and motivates a manufacturer to implement green production methods which can lead to a safe environment and bring economic performance and GSCP.
Based on the above literature, the proposed research model is shown in Figure 1.

Sample and Data Collection Procedure
In this study, partial least square-structure equation modeling (PLS-SEM) has been used to analyze the data. It is a new methodology on the exploratory stage relationships which can work on a small sample size. Considering this fact, this study analyzes the conceptual framework with modern statistical techniques to obtain greater accuracy in the results.
The target population of this study is the retail industry in Pakistan. The sample was taken from the utility, metro, and modern retail stores from five major cities, i.e., Faisalabad, Karachi, Peshawar, Lahore, and Islamabad. The justification of the population is that, in modern trade too many customers and suppliers are involved in trading on a regular basis. Modern retail stores have a

Sample and Data Collection Procedure
In this study, partial least square-structure equation modeling (PLS-SEM) has been used to analyze the data. It is a new methodology on the exploratory stage relationships which can work on a small sample size. Considering this fact, this study analyzes the conceptual framework with modern statistical techniques to obtain greater accuracy in the results.
The target population of this study is the retail industry in Pakistan. The sample was taken from the utility, metro, and modern retail stores from five major cities, i.e., Faisalabad, Karachi, Peshawar, Lahore, and Islamabad. The justification of the population is that, in modern trade too many customers and suppliers are involved in trading on a regular basis. Modern retail stores have a number of products and brands because they have more space and larger investments compared to other local stores. They are actively involved with customers and suppliers at the same time to create a balance between the demand and supply of products. Therefore, they need to manage their stores with the help of new technologies such as computers, scanners, and radio frequency identification (RFID) to increase their operational performance. This study focuses on IoT, SI, CI, ECB, GT, and GSCP; all these concepts are practically implemented in modern retail stores [76]. Hence, modern retail stores are a suitable population for this study. In the previous literature, the retail sector was considered as the targeted population for IoT, supply chain integration, and performance [11].
The sample is the subset of the population. In this study, 400 employees from modern trade stores have been selected through a simple random sampling technique; a probability sampling method. The demographics of the respondents are mentioned in Table 1. Both offline and online data collection methods were used. A questionnaire was designed based on the Likert Scale in this study. The offline questionnaire is distributed physically among employees while the online questionnaire link is forwarded through emails. A face to face survey has a better response rate compared to the online method, but the online survey method is free and the data collection is quick this way. Data were collected from February 2018 to May 2018. For an online questionnaire, one gentle reminder was sent to increase the response rate. In this study, a total of 400 questionnaires were distributed using both methods. The total number of completed filled questionnaires that were received was 250, that resulted in a total response rate of 62.5%.

Why Use PLS-SEM? Use of Modern Tools and Software
In this study, a few computer applications were used. The survey is designed by using lime survey which is a web-based survey application. This application gives survey responses outputs in a comma-separated values (CSV) file. This CSV file can be directly imported to SmartPLS 3 [76]. Additionally, SPSS 24 was also used in this study to compute variables and find frequencies of the demographic variables. Microsoft Word 2016 was used for report writing. A Grammarly Premium account was used to check grammar and spell checking of the manuscript. PLS-SEM was the main software used for empirical data analysis. There are two main reasons to choose PLS-SEM. First, the relationship between IoT, SI, CI, ECB, GT, and GSCP is at the exploratory stage and has not been established and empirically tested in the literature. PLS-SEM is more precise when presenting the variance of dependent variables. This software also helps test the relationship among different variables at their early exploratory stage [77][78][79]. Second, the sample size of this study is small for generalization. PLS-SEM enables one to calculate more precise variance on a small sample [80] since this software does not consider the assumptions of normality [81]. Furthermore, this study is also based on a small sample size; therefore, it is not possible to analyze statistical tests using covariance-based structural equation modeling software like AMOS. PLS-SEM resolves both of these problems. In this study, there were 5000 subsamples to bootstrap during analysis. Therefore, PLS-SEM is considered the suitable option to analyze the small sample size data at exploratory relationship stage.

Research Instrument
In this study, the research instrument has been developed by adapting those from previous studies. Only small changes needed to be made to the items. All items were measured on a Likert scale (five-point scale, anchored from strongly disagree to strongly agree). Items having factor loadings less than 0.6 were dropped and were not considered for further analysis. The reliability (Cronbach's Alpha and Composite reliability), validity, and factor loadings of items are mentioned in the following text.
Internet of Things (IoT): IoT has been measured using twelve items adapted from a previous study [11].
Energy Consumption behavior (ECB): ECB has been measured using ten items adapted from a previous study [32].
Green Training (GT): GT has been measured using ten items adapted from previous studies [69,72].
Green Supply Chain Performance (GSCP): GSCP has been measured using twelve items adapted from a previous study [84].

Common Method Variance
Common Method Variance is the variance attribute of the measurement method instead of the instrument variance method. The chances of common method biases are increased when data has been collected from the same respondents on a single questionnaire for both dependent and independent variables [85]. When the information about dependent and independent variables is collected from the same respondents at the same time, the common method bias has occurred. However, the common method bias can be reduced if the questionnaire has been divided into different pages for dependent and independent pages [85]. In this study, cross-sectional data has been collected for all study-relevant variables at the same time from the same respondents; therefore, it is necessary to check the common method bias in this study.
Common method bias can be reduced through different methods. First, Harman Method; second, Lindell and Whitney Method; third, the Bagozzi approach [86]. Common method bias can be analyzed through any of these methods. However, in this study, a correlational method (Bagozzi approach) was used to calculate the common method bias [86]. According to this method, if constructs have less than a 0.9 correlation with each other, then there is no common method bias. Therefore, the correlational values in Table 2 show that there is no common method bias in the study.

Measurement Model
Structural equation modeling is based on two types of models; first, a measurement model and, second, a structural model. In the measurement model, the validity and reliability of an instrument is analyzed [87]. Here, validity is measured through content validity, convergent validity, and discriminant validity [78,88]. Whereas, reliability is measured through Cronbach's Alpha and composite reliability.
Reliability can be measured through Cronbach's Alpha value. It typically checks the consistency or internal consistency of items. In this study, the reliability of items is tested, and the values of Cronbach's Alpha test are mentioned in Table 3. The minimum acceptable value for Cronbach's Alpha test is 0.6 [89]. In this study, the Cronbach's Alpha values of each variable have a value greater than o.6. Therefore, all variables are reliable for further analysis. Figure 2 shows the Cronbach's Alpha values for the reliabilities of all variables.

Measurement Model
Structural equation modeling is based on two types of models; first, a measurement model and, second, a structural model. In the measurement model, the validity and reliability of an instrument is analyzed [87]. Here, validity is measured through content validity, convergent validity, and discriminant validity [78,88]. Whereas, reliability is measured through Cronbach's Alpha and composite reliability.
Reliability can be measured through Cronbach's Alpha value. It typically checks the consistency or internal consistency of items. In this study, the reliability of items is tested, and the values of Cronbach's Alpha test are mentioned in Table 3. The minimum acceptable value for Cronbach's Alpha test is 0.6 [89]. In this study, the Cronbach's Alpha values of each variable have a value greater than o.6. Therefore, all variables are reliable for further analysis. Figure 2 shows the Cronbach's Alpha values for the reliabilities of all variables.

Figure 2. Cronbach's Alpha values of research variables.
Composite reliability is the consistency of all items of the specific construct [90]. It can be obtained through the PLS-SEM method. The results of composite reliability are mentioned in Table  3. The composite reliability is measured when items are reflective, while if the items have formative measures, then the variance inflation factor (VIF) can be measured [78,91]. In this study, reflective measures are used to measure both reliability and composite reliability. The minimum acceptable value for composite reliability is 0.6 [92]. In this study, the composite reliability values of each variable have a value greater than 0.6. All the constructs have a more than acceptable composite reliability value and that is why they are composite reliable. Figure 3 shows the composite reliabilities of all variables. Composite reliability is the consistency of all items of the specific construct [90]. It can be obtained through the PLS-SEM method. The results of composite reliability are mentioned in Table 3. The composite reliability is measured when items are reflective, while if the items have formative measures, then the variance inflation factor (VIF) can be measured [78,91]. In this study, reflective measures are used to measure both reliability and composite reliability. The minimum acceptable value for composite reliability is 0.6 [92]. In this study, the composite reliability values of each variable have a value greater than 0.6. All the constructs have a more than acceptable composite reliability value and that is why they are composite reliable. Figure 3 shows the composite reliabilities of all variables.  Content validity is the construct validity of items. The content validity is also called logical validity. The content validity is dependent on the grammar and content of the items. If the respondents can understand the content of all items and their logic, then the instrument has content validity. It can be analyzed through the factor loading of items [92,93]. If items have a factor loading greater than 0.6, then the instrument has content validity and respondents can understand the instrument. In Table 3, factor loading values show that all items have content validity.
Convergent validity refers to the theoretical relation of two constructs. It shows how many measures are related to each other. Convergent validity can be measured through factor loading. If the item has a factor loading greater than 0.6, then items have convergent validity [92,93]. In this study, the factor loading values are mentioned in Table 3; their values are greater than 0.6 for all items, demonstrating that all factors have convergent validity.
Discriminant validity is the opposite of convergent validity. It shows how much constructs are irrelevant to each other. Discriminant validity can distinguish between different constructs. Discriminant validity can be measured in two ways. First, the square root of the average variance extracted (AVE). If the values of the square root of AVE are more than the correlation values of latent variables, then items have discriminant validity [88,92]. In this study, the Fornell and Larcker method is used to analyze discriminant validity, as mentioned in Table 2. The values of the square root of AVE are also mentioned in Table 2. These values show that all items have discriminant validity. Figure 4 shows the average variance of extracted values of all variables. The second way to measure the discriminant validity is using the factor loadings. If items have high factor loading, then they have discriminant validity [94]. In this study, all items have a factor loading higher than 0.6, as mentioned in Table 3. Therefore, all items have discriminant validity. Content validity is the construct validity of items. The content validity is also called logical validity. The content validity is dependent on the grammar and content of the items. If the respondents can understand the content of all items and their logic, then the instrument has content validity. It can be analyzed through the factor loading of items [92,93]. If items have a factor loading greater than 0.6, then the instrument has content validity and respondents can understand the instrument. In Table 3, factor loading values show that all items have content validity.
Convergent validity refers to the theoretical relation of two constructs. It shows how many measures are related to each other. Convergent validity can be measured through factor loading. If the item has a factor loading greater than 0.6, then items have convergent validity [92,93]. In this study, the factor loading values are mentioned in Table 3; their values are greater than 0.6 for all items, demonstrating that all factors have convergent validity.
Discriminant validity is the opposite of convergent validity. It shows how much constructs are irrelevant to each other. Discriminant validity can distinguish between different constructs. Discriminant validity can be measured in two ways. First, the square root of the average variance extracted (AVE). If the values of the square root of AVE are more than the correlation values of latent variables, then items have discriminant validity [88,92]. In this study, the Fornell and Larcker method is used to analyze discriminant validity, as mentioned in Table 2. The values of the square root of AVE are also mentioned in Table 2. These values show that all items have discriminant validity. Figure 4 shows the average variance of extracted values of all variables. Content validity is the construct validity of items. The content validity is also called logical validity. The content validity is dependent on the grammar and content of the items. If the respondents can understand the content of all items and their logic, then the instrument has content validity. It can be analyzed through the factor loading of items [92,93]. If items have a factor loading greater than 0.6, then the instrument has content validity and respondents can understand the instrument. In Table 3, factor loading values show that all items have content validity.
Convergent validity refers to the theoretical relation of two constructs. It shows how many measures are related to each other. Convergent validity can be measured through factor loading. If the item has a factor loading greater than 0.6, then items have convergent validity [92,93]. In this study, the factor loading values are mentioned in Table 3; their values are greater than 0.6 for all items, demonstrating that all factors have convergent validity.
Discriminant validity is the opposite of convergent validity. It shows how much constructs are irrelevant to each other. Discriminant validity can distinguish between different constructs. Discriminant validity can be measured in two ways. First, the square root of the average variance extracted (AVE). If the values of the square root of AVE are more than the correlation values of latent variables, then items have discriminant validity [88,92]. In this study, the Fornell and Larcker method is used to analyze discriminant validity, as mentioned in Table 2. The values of the square root of AVE are also mentioned in Table 2. These values show that all items have discriminant validity. Figure 4 shows the average variance of extracted values of all variables. The second way to measure the discriminant validity is using the factor loadings. If items have high factor loading, then they have discriminant validity [94]. In this study, all items have a factor loading higher than 0.6, as mentioned in Table 3. Therefore, all items have discriminant validity. The second way to measure the discriminant validity is using the factor loadings. If items have high factor loading, then they have discriminant validity [94]. In this study, all items have a factor loading higher than 0.6, as mentioned in Table 3. Therefore, all items have discriminant validity.

Structural Model
The structural model can be assessed through the explanatory factors (R 2 ) of the model with their significant values. The validation of the model with the explanatory factors is mentioned in Figure 5. PLS-SEM does not require any distribution assumptions or parametric technique to check the validity of data. It works on the bootstrapping method to test the significant value of path coefficients [95,96]. The default bootstrapping value in software is 500, which was recommended in the previous study to gain precise results [97,98]. However, in this study, 5000 subsamples underwent the bootstrapping method to get more precise results of path coefficients. The values of path coefficients, t values, and significant values are mentioned in Table 4.  [90,98]. There are no hard and fast rules for differentiating between low and high values of variance. In the literature, it was suggested that the range of R 2 values can be 0.02, 0.13, and 0.26 [99], showing a low-, medium-, and high-variance explanation, respectively. In this manner, the research model path coefficients of GSCP have high values of R 2 . Figure 5 shows the path coefficient values of all variables. In this study, PLS-SEM structural equation modeling shows all the path coefficient values regarding the variables and factor loadings of each item that it has calculated. Figure 6 shows the values of all items factors loadings and their path coefficients of GSCP.  The ultimate goal of the structural model is to explain the variance of endogenous variables. The variance can be explained through R 2 [90,98]. There are no hard and fast rules for differentiating between low and high values of variance. In the literature, it was suggested that the range of R 2 values can be 0.02, 0.13, and 0.26 [99], showing a low-, medium-, and high-variance explanation, respectively. In this manner, the research model path coefficients of GSCP have high values of R 2 . Figure 5 shows the path coefficient values of all variables.

SI*GT (GSCP) → GSCP
In this study, PLS-SEM structural equation modeling shows all the path coefficient values regarding the variables and factor loadings of each item that it has calculated. Figure 6 shows the values of all items factors loadings and their path coefficients of GSCP.

Discussion and Conclusions
In the field of supply chain management, supply chain integration is a practically implemented concept in every organization because supply chain integration aligns organizational activities, processes, customers, and suppliers with manufacturers. In previous literature on supply chains, the relationship between supply chain integration and supply chain performance was already established. There is a positive and significant relationship between SI and supply chain performance. Also, in the same way, the positive and significant relationships in CI and supply chain performance are already established in the previous literature [41,100]. In this study, the empirical results show a positive and significant effect of CI and SI on GSCP, that are consistent with previous studies.
Internet of Things (IoT) has a direct effect on SI and CI. Also, IoT has an indirect effect on supply chain performance with a mediating effect on SI and CI, as was found in supply chain literature [11]. In this study, IoT has been considered as an independent variable whereas CI and SI are considered as mediating variables between IoT and GSCP. The empirical results of this study show that IoT has a positive effect on both CI and SI. Furthermore, both CI and SI have mediating roles between IoT and GSCP since the results are significant and positive. The results are consistent with the earlier literature in the supply chain domain [11].
In this study, ECB has moderated the relationship between IoT, CI, and SI. This relationship was not investigated and developed in the previous literature. The moderated relationship of ECB is the major contribution of this study to knowledge. However, the results of the moderated effects are amazing; both interaction terms have a negative but significant effect. The negative interaction effect shows that the combined effect of ECB and IoT is less than the individual effect of IoT on CI and SI. The reason for this negative interaction effect is that the implementation of IoT can automatically create awareness to develop the energy consumption behavior. So, when both variables are taken together, respondents understand both variables as separate identities that are chronically different to each other. This difference has created a negative and a significant interaction effect. On the other hand, the direct relationship between IoT and SI, and CI has a positive and significant effect.
Green training acts as a moderator in SI, CI, and GSCP. Such a relationship has not previously been considered in the preceding studies. It is the second contribution of this study. The empirical results show that GT can affect the GSCP directly. The direct relationship between GSCP practices and GT has a positive and significant effect in this study that was consistent with previous literature

Discussion and Conclusions
In the field of supply chain management, supply chain integration is a practically implemented concept in every organization because supply chain integration aligns organizational activities, processes, customers, and suppliers with manufacturers. In previous literature on supply chains, the relationship between supply chain integration and supply chain performance was already established. There is a positive and significant relationship between SI and supply chain performance. Also, in the same way, the positive and significant relationships in CI and supply chain performance are already established in the previous literature [41,100]. In this study, the empirical results show a positive and significant effect of CI and SI on GSCP, that are consistent with previous studies.
Internet of Things (IoT) has a direct effect on SI and CI. Also, IoT has an indirect effect on supply chain performance with a mediating effect on SI and CI, as was found in supply chain literature [11]. In this study, IoT has been considered as an independent variable whereas CI and SI are considered as mediating variables between IoT and GSCP. The empirical results of this study show that IoT has a positive effect on both CI and SI. Furthermore, both CI and SI have mediating roles between IoT and GSCP since the results are significant and positive. The results are consistent with the earlier literature in the supply chain domain [11].
In this study, ECB has moderated the relationship between IoT, CI, and SI. This relationship was not investigated and developed in the previous literature. The moderated relationship of ECB is the major contribution of this study to knowledge. However, the results of the moderated effects are amazing; both interaction terms have a negative but significant effect. The negative interaction effect shows that the combined effect of ECB and IoT is less than the individual effect of IoT on CI and SI. The reason for this negative interaction effect is that the implementation of IoT can automatically create awareness to develop the energy consumption behavior. So, when both variables are taken together, respondents understand both variables as separate identities that are chronically different to each other. This difference has created a negative and a significant interaction effect. On the other hand, the direct relationship between IoT and SI, and CI has a positive and significant effect.
Green training acts as a moderator in SI, CI, and GSCP. Such a relationship has not previously been considered in the preceding studies. It is the second contribution of this study. The empirical results show that GT can affect the GSCP directly. The direct relationship between GSCP practices and GT has a positive and significant effect in this study that was consistent with previous literature [69]. On the other hand, the moderator effect of GT between SI, CI, and GSCP is considered in this study, but it is not supported by the data. The results reflect the insignificant interaction effect of GT with IoT and GSCP. Therefore, GT has been observed as an independent variable instead of a moderator variable.
It can be concluded that the implementation of IoT is beneficial for a customer, supplier, and manufacturer in supply chain management to enhance supply chain performance. The use of the internet and computerized technology also saves energy and resources. Boosting GSCP can protect the environment and result in the better economic performance of organizations. IoT can affect supplier and customer integration of internal supply chain integration, which is affected by GT and ECB to improve GSCP. Contingency theory supports this study because there is no perfect solution to all the organizational problems. It can be divided into small parts or departments to resolve big issues or to solve the big game; one must divide the big game into small pieces and determine the components individually to address big issues through the use of organizational resources and capabilities.

Limitations and Future Directions
Every study has some limitations and as such this study is not free from limitations. This study is limited to only an external supply chain integration of SI and CI, while the internal supply chain integration regarding the organizational processes and activities has been ignored in this study. In future, internal supply chain integration can be considered with the external supply chain integration because both variables have their own and equal importance.
In this study, only cross-sectional data from five different cities in Pakistan have been taken, while in future longitudinal data at different times can be taken for a deeper analysis. Furthermore, data can be collected from other under-developed countries such as India, Sri Lanka, or Malaysia for a comprehensive investigation of the results. In this study, data has been collected through modern trade stores, while, in future, data can be collected from the manufacturing industry to generalize the framework of this study.
In this study, only the survey method has been used, which was analyzed using PLS-SEM, while, in future, interviews from a field expert can be used to add more variables and important factors. Other methodologies like interpretive structural modeling (ISM), and multicriteria decision making (MCDM) methodologies can be used in future studies. In addition, the mixed methodology can be used to conceptualize and analyze the framework.