Design and Analysis of Dual-Band High-Gain THz Antenna Array for THz Space Applications

: In this paper, a high-gain THz antenna array is presented. The array uses a polyimide substrate with a thickness of 10 µ m, a relative permittivity of 3.5, and an overall volume of 2920 µ m × 1055 µ m × 10 µ m, which can be employed for THz band space communication and other interesting applications. The dual-band single-element antenna is designed in four steps, while operating at 0.714 and 0.7412 THz with − 10 dB bandwidths of 4.71 and 3.13 GHz, providing gain of 5.14 and 5 dB, respectively. In order to achieve a high gain, multiple order antenna arrays are designed such as the 2 × 1 antenna array and the 4 × 1 antenna array, named type B and C, respectively. The gain and directivity of the proposed type C THz antenna array are 12.5 and 11.23 dB, and 12.532 and 11.625 dBi at 0.714 and 0.7412 THz, with 99.76 and 96.6% radiation efﬁciency, respectively . For justiﬁcation purposes, the simulations of the type B antenna are carried out in two simulators such as the CST microwave studio (CSTMWS) and the advance design system (ADS), and the performance of the type B antenna is compared with an equivalent circuit model on the bases of return loss, resulting in strong agreement. Furthermore, the parametric analysis for the type C antenna is done on the basis of separation among the radiating elements in the range 513 to 553 µ m. A 64 × 1 antenna array is used to achieve possible gains of 23.8 and 24.1 dB, and directivity of 24.2 and 24.5 dBi with good efﬁciencies of about 91.66 and 90.35% at 0.7085 and 0.75225 THz, respectively, while the 128 × 1 antenna array provides a gain of 26.8 and 27.2 dB, and directivity of 27.2 and 27.7 dBi with good efﬁciency of 91.66 and 90.35% at 0.7085 and 0.75225 THz, respectively. All the results achieved in this manuscript ensure the proposed design is a feasible candidate for high-speed and free space wireless communication systems.


Introduction
Developments in the field of wireless communication, Satellite Communication (Sat-Com), and radio astronomy have led us towards the utilization of THz bands due to the unavailability of large bandwidth in GHz spectrum and high-data-rate demand by consumers [1].Data traffic is exponentially increasing due to abrupt variations in data generation and transmission by today's society [2].That is why the terahertz (THz) frequency bands, i.e., from 0.1 to 10 THz, especially from 0.1 to 1 THz, have attracted a great deal of interest in the fast few years due to ITU recommendations [3][4][5], advancements in THz technology, the availability of a wide unused bandwidth, and high data rate facilities [6].ITU has reported a few bands from 0.1-1 THz for spectroscopy, radio astronomy, satellite communication, and space research [3][4][5].Electromagnetic waves at THz frequency bands may also offer some other applications such as remote area communication, remote detection, clinical findings, radio cosmology, etc. [6].
Nonetheless, THz waves suffer from high attenuation due to atmospheric particles, such as water and gas molecules around the earth's surface [7][8][9][10][11].In the case of free space communication with minimal attenuation loss and a reliable communication link, a few design contemplations are needed for the wireless communication antenna, such as a highgain antenna with maximum data rate capacity, and high directivity [3].In space, the THz wave antenna is a suitable candidate for any application [12].A high-gain THz antenna is required especially for satellite communication [3], and according to ITU recommendations for satellite communication, radio astronomy, and spectroscopy, a THz antenna will require minimum directivity of 24 dBi for space communication [5].Various antenna models were reported in the past for satellite communication (SatCom); all of them were highly directive.The most popular antennas used for these services were either a wire, or a horn antenna with a parabolic reflector, while operating at GHz bands; these THz antenna were either linear, circular, or elliptical polarized [13].However, these models face some limitations at THz bands, such as structural complexities and getting overheated [14][15][16][17][18]. Present-day progress in super-high-speed terahertz (THz) communication systems demands low cost, a low profile, and exceptionally efficient antenna design [6] with high directivity, to overcome propagation loss at THz bands ranging from 0.1 to 10 THz [3][4][5].The microstripe or planar antenna is the most suitable candidate antenna among the existing antenna models for overcoming these limitations [19] due to the easy fabrication and integration of the planar antenna with micro scale devices as compared to the millimeter scale horn antenna.The THz planar antennas are small in terms of the micrometer scale, but their operations at THz bands cause problems, such as low gain and low bandwidth [20].
Despite the fact that the planar antenna has low gain and directivity, it is still used in multiple fields because high directivity can be achieved by utilizing multiple methods, such as antenna array, PBG-based antenna, and the reflector method [21,22].However, the array technique is a suitable candidate that provides maximum gain and directivity as compared to other techniques [23].The use of the antenna array can provide many benefits in different working conditions, such as the control of electromagnetic radiations and the provision of high directivity [24].For wireless communication in the THz frequency band, many papers were reported in the literature, such as in [25], where the authors presented a cassegrain-based horn antenna that provides a high gain of 25 dB at 0.3 GHz, but the size of the antenna was not small.Similarly, the authors in [26] reported a 15-element antenna array providing directivity and radiation efficiency of 11.71 dBi and 70.8%, respectively, while operating at 0.3 THz.Similarly, the authors in [27] presented a PBG-based microstrip patch array antenna operating at 0.6 THz and providing gain, directivity, and radiation efficiency of 16.88 dBi, 17.19 dBi, and 89.72%, respectively.
However, the authors of [28] presented a PBG-based microstrip patch antenna array while operating at 0.65 THz and providing gain and radiation efficiency of 11.60 dB and 86.75%, respectively In addition to it, a high-gain Terahertz microstrip antenna array was proposed while operating at 0.1169 THz and providing gain, directivity, and radiation efficiency of 19.6 dB, 21.6 dBi and 67%, respectively [29].Furthermore, the authors in [30] presented work on a graphene-based microstrip patch antenna array, working at 0.8883 THz and offering gain, directivity, and radiation efficiency of 14.6 dB, 15.5 dBi, and 83.67%, respectively.Similarly, the authors of [31] reported a Sub-THz 4 × 1 array antenna, operating at 0.3 THz and providing gain and efficiency of 13.6 dB and 89%, respectively.According to the work presented in [25][26][27][28][29][30][31][32][33][34][35][36][37], all the authors attempted to present a THz antenna, but they were not able to present a high-gain antenna with wide bandwidth in terms of any targeted application.In Table 1, the results are compared with the simulated results of the past reported work in the literature.
In our current work, all the elements of the plannar antenna array are impedancematched with waveguide feed network impedance.For gain enhancement, an investigation is carried out to study the effect of a multiple-order antenna array, e.g., 2 × 1, 4 × 1 and 64 × 1 setups are introduced to accomplish an exceptionally mandated pattern of 24 dBi directivity, to empower the proposed antenna for wireless transmission for space applications.The remaining parts of this paper are organized in the following sections.Section 2 depicts the design of a dual band novel shape antenna.Section 3 presents the geometry of the dual-band THz antenna array.Section 4 presents the simulation results augmented with the discussion, and, finally, Section 5 concludes the presented work.

Proposed Antenna Structure
Before designing the dual-band high-gainTHz array antenna, the design of the proposed dual-band THz single antenna is required.Polyimide is utilized as a substrate material, having a loss tangent of 0.0027, a low dielectric loss, and a relative permittivity of 3.5 [6].The dielectric losses D l per millimeter in polyimide substrate at a resonance frequency f r of 0.7 THz can be calculated by using the following equation: where D l , C, V, tan (δ) represent the dielectric losses per millimeter, the capacitance of the antenna, the voltage applied to the antenna, and the tangent loss of polyimide material.According to Equation (1), the dielectric losses of polyimide substrate at 0.7 THz are negligible, while PEC is used as a conducting material due to its low requirements of very fine meshes, and it is an ideal and efficient conductor for simulations in THz frequency range.The simulated results would be similar for all conducting because the resonance frequency of the antenna depend upon the dimensions of antenna, the material of the substrate, and the thickness of the substrate.The general volume of the single-element antenna is 536 µm × 526 µm × 10 µm.From now on, the following labels will be utilized to distinguish among multiple variations in the designed antennas that are talked about in this paper: Step 1: A circular THz antenna upheld by polyimide substrate material, as displayed in Figure 2a.
Step 2: The cut has been introduced in the upper portion of the circular shape to obtain, for example, the half-moon-shaped THz antenna, as displayed in Figure 2b.
Step 3: A elliptical shape conductor is introduced in the upper portion of the half-moonshaped THz antenna, as displayed in Figure 2c.
Step 4: A novel-shaped THz antenna, as displayed in Figure 2d; this shape is utilized as the main antenna to analyze the operation of the other antennas.
The parametric values of the above-mentioned Step 4 antenna are shown in Table 2.The Step 1 antenna in Figure 2a is a simple circular antenna.The Step 2 antenna is a THz antenna with an elliptical shape cut out of size 263 µm × 131.5 µm × 1 µm, as displayed in Figure 2b.The Step 3 antenna is shown in Figure 2c; this is approaches the proposed THz antenna with elliptical metallic addition of size 30 µm × 131.5 µm × 1 µm.While the Step 4 antenna is shown in Figure 2d, this is the proposed and reference novel shape dualband THz antenna supported by three elliptical shape metallic additions of size 30 µm × 131.5 µm × 1 µm, and each of them is separated by an angle of 40 • from each other.Later, it will be observed from the results in the simulations section that the Step 4 antenna provides better performance than the remaining three models; the parameters of the THz antenna are calculated by utilizing a very famous planar antenna theory [38] for the resonance frequency ( f r ) in the unit of Terahertz (THz), a relative permittivity ( r ), and the height of the substrate (h s ) in units of micrometers (µm).The effective length (L p ) and width (W p ) are calculated by using the following equation [39]: where radius (P) is representing the actual radius of microstrip circular antenna, it is calculated by using the following equations [39]: (3) where the magnitude of J is determined by using the following equation: The effective area of the antenna (A e ) is calculated by using the following equation: The corporate feed line network is adopted for THz antenna array due to structure simplicity.However, unwanted radiations are created due to feed-resistive loss, which results in the form of side lobe radiations.The corporate feed line is designed for two purposes: to control the directivity and power radiation of antenna by using the equal power distribution among the radiating elements, and to avoid unwanted radiations by matching the driven elements input resistance with a wave guide port input impedance of 50 Ω value [28].The impedance of the feed line is controlled by a feed line width W f , where W f is given by using the formula [30].
where, Z c , h s , and r denote the impedance of the feed line, the height of the substrate, and the relative dielectric constant of the substrate material, respectively.The structure of the proposed novel shape antenna is displayed below in Figure 1.While, the dimensions of the proposed novel shape antenna are listed in the Table 2.The step by step development of the proposed dual-band THz antenna is designed as mentioned in Figure 2; the group of these shapes is responding in the form of different return losses, as shown in Figure 5.

Proposed Array Antenna Design
This section focuses on the design aspects of antenna array, where an array is a set of identical radiating element separated by distance d; all are used in matrix order for increasing the gain and directivity of the overall antenna.Therefore, in this section, the proposed novel shape dual-band antenna array design is undertaken, as shown in Figure 3.
As shown in Figure 3, a set of identical elements are placed at a distance of d away from each other.To work with the THz array, it is required to generate and control the amplitude or at least the time delay or phase shift at each radiating antenna that is controlled by separation distance d [24].From this perspective of dual-band THz antenna, the separation distance d among radiating elements is 533 µm , which provides good radiation performance in terms of good return loss, gain, and radiation efficiency, as will be discussed in the next section.All the information about the dimension of the primary boundaries of the four kinds of the THz antenna and arrays is recorded in Table 2.The maximum output gain of the antenna array is controlled by using the array factor (AF).The array factor of an antenna array depends upon the order of an array and the distance (d) between the radiating elements; besides that, the phase β between array elements also takes part in the calculation of the array factor.The array factor (AF) is calculated by using the following equation [24, 27,40]: where, the total directivity D t of the array is controlled by the array factor (AF) and single-element directivity (D o ).
The total efficiency of the array antenna can be calculated by using the following equation: where, e f , G t , and D t representing the total efficiency (%), total gain (dB), and directivity (dBi) of the antenna array, respectively.From now on, the accompanying labeling classification will be utilized to differentiate between the multiple variations of the designed antenna array that are discussed in this paper: Type A: Novel shape dual-band THz antenna, as displayed in Figure 4a.The Type A antenna in Figure 4a is designed on a homogeneous polyimide substrate, and this is considered a prospective antenna to assess the performance of different antenna arrays.For increasing the gain of antenna, the order of the antenna array is increased.The Type B antenna array is a 2 × 1 novel shape dual-band THz antenna array based on a homogenous substrate of overall volume of 1324 µm × 791 µm ×10 µm, and each radiating element is separated by 533 µm, as displayed in Figure 4b.Similarly, Type C is displayed in Figure 4c, where four radiating elements are separated by 533 µm.Subsequently, it will become evident that the Type C provides the ideal presentation as compared to remaining mentioned types; the radiating elements of the array were designed by utilizing the notable microstrip antenna hypothesis [38].For feasibility purposes, a parametric sweep is run for getting better results, as shown in Figure 9.
The constructional improvements in the proposed array model are carried out in the following steps, as depicted in Figure 4.These models create a group of reflection coefficients, studied in the next section.The numbers of radiating elements are increased for enhancement purposes in the antenna performance in terms of the high gain, directivity, and low reflection coefficient.In the next step, the Type B THz antenna array is developed; in this development process, a set of two identical novel shape elements are placed in a row by separation distance of 533 µm; thus, the Type B THz array is achieved with better gain and directivity at 0.725 and 0.75 THz, respectively.Similarly, in Type C antenna array development process, a set of four identical novel shape elements are placed in a row with separation distance of 533 µm.Thus, a high-gainand directive 4 × 1 THz array antenna is designed.

Simulation
For multiple applications, such as radio astronomy, spectroscopy, free space satellite communication, and space research, the proposed dual-band 4 × 1 novel shape THz antenna array is suggested, which operates at 0.714 and 0.7412 THz, respectively.The operational features of the presented antenna are inspected in the frequency range 0.675 to 0.775 THz by utilizing the finite integration technique (FIT) [41].The details about design and simulation are listed in Table 3.The simulation results of the antenna models are discussed in terms of return loss, gain, directivity, impedance, band width (BW), and radiation efficiency in the mentioned frequency band.In first section, the return losses of all the steps are discussed, as shown in Figure 5, which are useful for the proposed novel shape antenna design analysis.In the second section, the return losses and voltage standing wave ratio (VSWR) of the Type A, Type B, and Type C antenna arrays are discussed in Figures 6-10.The third section deals with the study of Type A, Type B, and Type C antenna array 2D radiation polar plots, and it is discussed in Figure 13.Similarly, the fourth section presents the far-field radiation patterns of all types of antenna arrays, such as Type A, Type B, and Type C as shown in Figure 14.The final fifth section presents the gain (dB) and radiation efficiency (%) verses frequency (THz) graphs of all types antenna arrays, including Type A, Type B, and Type C as shown Figure 15.
As mentioned earlier, Figure 5 analyzes the return losses verses frequency graphs for single-element antennas, such as the Step 1, 2, 3, and 4 antennas, which resonate at 0.714, 0.698, and 0.702 THz, respectively.Step 4 is dual-band antenna resonating at 0.714 and 0.7412 THz with −10 dB bandwidths of 4.71 and 3.13 GHz, respectively.
It is observed in Figure 5 that the Step 1 antenna resonates at 0.6985 THz, providing a −10 dB bandwidth of 8.67 GHz.The resonance frequency of Step 2 antenna is slightly shifted toward right side, and it operates at 0.7025 THz and provides a −10 dB bandwidth of 15.44 GHz.Similarly, the resonance frequency of the Step 3 antenna is further slightly shifted toward the right side, and it operates at 0.711 THz and provides a −10 dB bandwidth of 11.73 GHz.Moreover, the Step 4 antenna is a dual-band antenna; it operates at 0.7085 and 0.75225 THz with −10 dB bandwidths of 9.08 and 6.34 GHz, respectively.Figure 7 provides comparable information about the impedance matching of the Step 4 antenna and the equivalent circuit model, while Figure 6 presents the equivalent circuit model of the dual-band THz antenna and feed line as mentioned in Step 4. The equivalent circuit of the proposed dual-band antenna comprises a radiating patch and a feed line; the radiating patch is represented by one resistor (R), two inductors (L), and one capacitor (C).All of them are connected in parallel.These parameters are represented by R 1 , L 2 , L 4 , and C 2 , respectively, as shown in Figure 6.While the equivalent circuit model of feed line is made of two inductors (L) and two capacitors (C), each of them are connected in series and parallel with each other; these parameters are represented by L 1 , L 3 , C 1 , and C 3 , respectively, as shown in Figure 6.The resonance frequencies f c1 and f c2 of the proposed RLC circuit is calculated by using a resonance circuit formula [42].
The calculated and equivalent circuit model (ECM) first and second resonance frequencies f c1 and f c2 are listed in Tables 4 and 5, respectively.Similarly, the bandwidths BW 1 and BW 2 of the proposed equivalent circuit model (ECM) are calculated by using the following equations: The calculated and equivalent circuit model (ECM) bandwidths BW 1 and BW 2 of the first and second resonance frequency bands are listed in Tables 4 and 5.The reflection coefficient of the proposed dual-band novel shape THz antenna is tuned according to the resonance frequencies by changing the magnitudes of the capacitors and inductors.The mutual correlation between the reflection coefficients of the proposed dualband Step 4 THz antenna and the equivalent RLC circuit model is compared in Figure 7, which presents strong agreement between the two reflection coefficients.The calculated and equivalent circuit model results shown in Tables 4 and 5 suggest that the first resonance frequency is associated with the values of L 1 , L 2 , C 1 , and C 2 , while the second resonance frequency is tuned with the values of L 3 , L 4 , C 3 , and C 4 , respectively.The first resonance frequencies, i.e., the calculated f c1 calculated version and equivalent circuit model f c1 ECM version, are 0.708314 and 0.7085 THz, respectively.Similarly, the second resonance frequencies, i.e., the f c2 calculated version and equivalent circuit model f c2 ECM version, are 0.753 and 0.7525 THz, respectively.
The calculated and equivalent circuit model results show that the first bandwidth BW 1 is associated with the values of R 1 , L 1 , and L 2 , while the second bandwidth is tuned with the values of R 1 , L 3 , and L 4 , respectively.The calculated BW 1 and equivalent circuit model BW 1 bandwidths are 10 and 10 GHz for the first resonance frequency at 0.708314 and 0.7085 THz, respectively.Similarly, the calculated BW 2 and equivalent circuit model BW 2 bandwidths are 10 and 10 GHz for the second resonance frequency at 0.753 and 0.7525 THz, respectively.Table 2 shows the parameters of Type C antenna array.It is clear from Figure 8 that the Type A antenna array operates at 0.7085 and 0.75225 THz, with −10 dB band widths of 9.12 and 6.4 GHz, respectively.The resonant frequencies f c1 and f c2 of the Type B antenna is somewhat moved to 0.698 and 0.758 THz, and providing −10 dB bandwidth of 8.37 and, 6.83 GHz, respectively.The Type C antenna provides resonance at frequencies of 0.714 and 0.7412 THz with a −10 dB band width of 4.71 and 3.13 GHz, respectively.From Figure 8, it can be seen that the operating bandwidth of the Type C antenna for the 0.714 THz frequency fluctuates in the range of 0.711-0.716THz, while for the 0.741 THz frequency, it varies from 0.739-0.742THz.In Figure 8, the small variations in the operating bands are compromised to obtain good performance results at a separation distance d of 533 µm.However, a dual-band antenna array is still operating in the allocated bands, which are reserved for the mentioned applications.
In the case of every antenna array, the order of array and separation distance d among the radiating elements are very important parameters as they play a very significant role with respect to the operating bands because they define the behavior of the antenna array in terms of return loss.For comparison proposes, the reflection coefficients of Type A, Type B, and Type C antenna arrays are plotted in Figure 8.The parametric analysis of the Type C antenna array on the basis of separation distance d among the radiating elements is taken into account from 513-553 µm, as plotted in Figure 9, where the separation distance of 533 µm provides a better return loss of −20 dB at 0.714 and 0.7412 THz, respectively.In Figure 10, the voltage standing wave ratios (VSWRs) of the Type A, Type B, and Type C antennas are analyzed and compared.The Type A antenna provides VSWRs of 1.21 and 1.17 while operating at 0.708 and 0.75225 THz , respectively.Similarly, the Type B antenna provides VSWRs of 1.01 and 1.27 while operating at 0.689 and 0.758 THz, respectively.Similarly, the Type C antenna provides VSWRs of 1.14 and 1.18 while operating at of 0.714 and 0.7412 THz, respectively.These results of the VSWR show strong agreement with the ideal value of 1, which is considered a reasonably matched antenna with the feed line.In Figure 11, the insertion losses of the Type A, Type B, and Type C antenna arrays are depicted; it is clear that the Type C antenna has low insertion losses of 0.021 and 0.05 dB compared to the Type A and B antennas.
In Figure 12, the dielectric losses per millimeter are depicted for the Type A, Type B, and Type C antennas.The applied voltage for all the antennas is 5 volts, while the value of capacitance C varies with respect to the effective area A e of the antennas.Therefore, the Type A, Type B, and Type C antennas have different dielectric losses per millimeter, as mentioned in Figure 12.The main purpose of designing of an antenna array from a single-element antenna is achieving a better results in antenna performance in terms of gain and directivity.Figure 15 suggests that as the numbers of radiating elements are increased in an antenna array, it results in a higher gain.From Figure 15, it can be seen that the gain of the Type C antenna for the 0.714 THz frequency band fluctuates in the range of 11.23-12.72dB, while for the 0.741 THz frequency band, it varies from 9.65 dB to 11.64 dB.In addition, the efficiency of the Type C antenna for the 0.714 THz frequency band fluctuates in the range of 98.5-98.7% with a peak value of 99.7% at resonance frequency, while for the 0.741 THz frequency band, it varies from 98.9% to 95.57% with 96.6% at the resonance frequency; these efficiency ranges are greater than 95% for both bands, as shown in Figure 15.As mentioned in the introduction section, the space communication demands a high directive antenna of at least 24 dBi.For the purpose of achieving the recommended gain and directivity, the CST microwave studio built-in array tool kit is used to calculate the array 3D pattern and the required gain and directivity from a single element with the help of an array factor (AF).For simplification purposes, the following labeling is adopted: Type D: dual-band 64 × 1 THz antenna array; Type E: dual-band 128 × 1 THz antenna array.The polar plot and 3D radiation pattern of the 64 × 1 and 128 × 1 element arrays are depicted in Figures 16 and 17, respectively, which show that the beam width becomes narrower and a peak gain of 23.8 and 24.1 dB, and 26.8 and 27.2 dB, can be achieved, respectively.
For comparison purpose, Table 6 depicts a summary of type A, B, C, D and E THz antenna array results in term of gain (dB).

Conclusions
In the present work, the dual-band THz antenna array is analyzed and compared with respect to design characteristic performance.The radiation properties of the proposed novel array antenna have been analyzed with multiple radiating elements.Furthermore, the effects of the separation distance among the radiating elements have also been analyzed for Type C antenna.The directivity and gain of the proposed novel THz array antenna are 12.5 and 11.23 dB, and 12.532 and 11.625 dBi, at 0.714 and 0.7412 THz with 99.76 and 96.6% radiation efficiency, respectively .The minimal return loss of the simulated type C antenna is examined in the parameter sweep, less than −37 dB at a corresponding separation distance d of 533 µm at a resonant frequency of 0.7123 THz.The effects of the variation in the number of radiating elements on the return loss and on the gain have also been observed, and it has also been concluded that with the increase in the number of radiation elements, the bandwidth of the antenna decreases significantly.Hence, the proposed array antenna is a potential candidate to be utilized for earth exploration satellite and space research.

Figure 1 .
Figure 1.The proposed novel shape dual-band THz antenna: (a) Front view (b) Side view.

Figure 4 .
Figure 4. Design procedure of novel shape dual-band THz antenna array: (a) Type A antenna; (b) Type B antenna array; and (c) Type C antenna array.

Figure 5 .
Figure 5. Evaluation of Type A/Step 4 antenna with the help of return loss vs. frequency graph.

Figure 6 .
Figure 6.Equivalent circuit model of dual-band THz antenna.

Figure 7 .
Figure 7.Return losses of dual-band Step 4 THz antenna and equivalent circuit model.

Figure 8 .
Figure 8.Comparison of return loss vs. frequency.

Figure 9 .
Figure 9. Parametric analysis of Type C antenna array.

Figure 10 .
Figure 10.Comparison of all types of array antennas on the bases of VSWR.

Figure 11 .
Figure 11.The insertion losses of Type A, Type B, and Type C antennas.

Figure 12 .
Figure 12.The dielectric loss per millimeter of Type A, Type B, and Type C antennas.The 2D polar plots and 3D radiation patterns of Type A antenna, Type B antenna, and Type C antenna are shown in Figures 13 and 14, respectively.The simulation results show that the dual-band type A antenna directs the THz signals at 5.38 • and 39.0 • with the half power beam widths (HPBW) of 54.3 • and 64.5 • , the side lobe of −2.2 and −1.8 dB, while operating at frequencies of 0.708 and 0.75225 THz with main lobe magnitudes of 5.51 and 6.25 dB and a radiation efficiency of 91.66 and 90.35%, respectively.Similarly, the Type B antenna array directs the THz signals at 56 • and −8 • with the half-power beam widths (HPBW) of 43.1 • and 68 • , with side lobes of −4.5 and −2.7 dB while operating at frequencies of 0.689 and 0.758 THz with main lobe magnitudes of 9.95 and 7.75 dB and radiation efficiencies of 96.09 and 95.45%, respectively.Additionally, the Type C antenna array directs the THz signals at 58 • and −25 • with the half-power beam width (HPBW) of 49.8 • and 27.8 • , with side lobes of −2.2 and −2.7 dB while operating at frequencies of 0.714 and 0.7412 THz with main lobe magnitudes of 12.5 and 11.23 dB and radiation efficiencies of 99.76 and 96.6%, respectively.From these values, it is concluded that as the number of transmitting elements increases in the array, the dual-band THz antenna array becomes more directive.TheTHz antenna is reasonably matched with feed lines, which is why the side lobes are negligible and the array antennas are more than 90 % efficient.

Figure 13 .Figure 14 .
Figure 13.A comparison of the Type A, Type B, and Type C antenna arrays on the bases of polar plots: (a) Type A at 0.708 THz, (b) Type A at 0.75225 THz, (c) Type B at 0.698 THz, (d) Type B at 0.758 THz, (e) Type C at 0.714 THz, and (f) Type C at 0.7412 THz.

Figure 15 .
Figure 15.Comparison of gains and radiation efficiencies of Type A, Type B, and Type C antenna arrays.

Figure 16 .Figure 17 .
Figure 16.Comparison of polar plots for dual-band Type D and Type E THz antenna array.(a) Type D antenna array at 0.7085 THz (b), Type D antenna array at 0.75225 THz, (c) Type E antenna array at 0.7085 THz, and (d) Type E antenna array at 0.75225 THz.

Figure 17 .
Figure 17.Comparison of 3D radiation pattern for dual-band Type D and E THz antenna array.(a) Type D antenna array at 0.7085 THz, (b) Type D antenna array at 0.75225 THz, (c) Type E antenna array at 0.7085 THz, and (d) Type E antenna array at 0.75225 THz.

Table 1 .
Comparison of dual-band THz antenna array with past reported work.

Table 2 .
List of parameters used in THz antenna array designing.

Table 3 .
Investigation of presented antenna models by simulation parameters..

Table 4 .
List of parameters for first resonance frequency f c1 .

Table 5 .
List of parameters for second resonance frequency f c2 .

Table 6 .
Comparison of gains of various antenna arrays.