The Power of HPTLC-ATR-FTIR Hyphenation in Bioactivity Analysis of Plant Extracts

Given the simplicity in sample preparation and application, thin-layer chromatography (TLC) and high-performance thin-layer chromatography (HPTLC) as its most enhanced form are commonly used to separate and identify complex mixtures in solution. (HP)TLC has a long tradition of use in quality control of medicinal plants, complex plant extracts and natural products. HPTLC is based on the use of special layers of ﬁne particles of stationary phase (~5 µ m, narrow particle size range) applied to a plate. The use of automated computer controlled HPTLC instrumentation has improved method sensitivity, reproducibility, separation e ﬃ ciency and enabled quantitative determination of separated components. Through coupling with direct enzyme and enzyme inhibition bioassays whose response can be visualized on the chromatographic plate, (HP)TLC has been established as a targeted bioactivity screening method. These bioautographic assays provide not only phytochemical results by chromatographic separation, but also additional information about the activity of constituents in

Given the simplicity in sample preparation and application, thin-layer chromatography (TLC) and high-performance thin-layer chromatography (HPTLC) as its most enhanced form are commonly used to separate and identify complex mixtures in solution. (HP)TLC has a long tradition of use in quality control of medicinal plants, complex plant extracts and natural products. HPTLC is based on the use of special layers of fine particles of stationary phase (~5 µm, narrow particle size range) applied to a plate. The use of automated computer controlled HPTLC instrumentation has improved method sensitivity, reproducibility, separation efficiency and enabled quantitative determination of separated components.
Through coupling with direct enzyme and enzyme inhibition bioassays whose response can be visualized on the chromatographic plate, (HP)TLC has been established as a targeted bioactivity screening method. These bioautographic assays provide not only phytochemical results by chromatographic separation, but also additional information about the activity of constituents in complex mixtures and extracts. However, one of the problems in (HP)TLC is the identification of separated compounds on the plate. In recent years, considerable effort has been devoted to the coupling of (HP)TLC with spectrometric methods due to the robustness and simplicity of (HP)TLC and the need for effective identification and determination of sample constituents. In instrumental analysis, compounds are usually been identified based on chromatographic-spectroscopic hyphenated techniques. The goal of hyphenation of two analytical techniques in (HP)TLC is to enable rapid and efficient chromatographic separation with subsequent identification of the separated fractions. Mass spectrometry (MS) is one of the most powerful identification techniques used in analytical chemistry and biochemistry. It has been successfully hyphenated with (HP)TLC as thin layer chromatography/mass spectrometry (TLC/MS) and thin layer chromatography/tandem mass spectrometry (TLC/MS/MS) [1][2][3][4][5][6]. Although TLC/MS/MS offers additional benefits, it requires more expensive instrumentation and more challenging operational requirements. Also, HPTLC-MS and HPTLC/MS/MS systems are available to only a small number of research groups. The introduction of an elution-based TLC-MS interface has also allowed the possibility of expanding the connection with other detectors. The chromatogram bands can be eluted from the HPTLC plate with a suitable solvent and either transferred online to the mass spectrometer or collected in a sample vial for further offline analysis.
Infrared (IR) spectroscopy is another useful spectroscopic method that can be coupled with (HP)TLC. The major advantages of IR spectroscopy is no (or minimal) sample preparation is required, and it is an environmentally friendly and reagent-free green tool, that provides results within minutes [7]. Most IR spectrometers are easy to use, portable, and relatively inexpensive. After separation and bioassay detection, eluted bioactive bands can be easily chemically characterized using attenuated total reflection Fourier transform infrared (ATR-FTIR) spectral analysis ( Figure 1). bioassay detection, eluted bioactive bands can be easily chemically characterized using attenuated total reflection Fourier transform infrared (ATR-FTIR) spectral analysis ( Figure 1). FTIR spectra are typically measured in the mid-IR region (4000 to 400 cm −1 ) of the electromagnetic spectrum. When organic molecules absorb IR radiation, the radiation is converted into molecular vibrations. Although the IR spectrum is not characteristic of the entire molecule, the energy required to vibrate a functional group such as a carbonyl (-C=O) is very similar in different compounds so the peaks occur at or near the same frequency regardless of the structure of the rest of the molecule. Thus, IR spectroscopy can be used to elucidate organic structure by providing structural/chemical characterization based on functional group vibrations. Characteristic absorption bands can be used for compound-specific detection or to verify quality markers in plant extracts or distillates while a fingerprint IR spectrum can be used to identify unknown compounds.
Attenuated total reflection (ATR) is a sampling technique which is considered a universal sampling accessory. Spectra are recorded directly in either the solid or liquid state, without sample preparation. The only sample preparation required is to apply pressure with the pressure applicator, if solid samples are analyzed. There is no need to apply pressure when liquid samples are analyzed. The quality of ATR-FTIR spectra is sufficient to allow identification when examined and compared to the reference spectra of pure compounds, on different portions of the spectrum. Despite a small interference from solubilized silica to sample identification, compounds isolated from certain chromatographic bioactive bands can be identified. The search-match results can be used to compare the ATR-FTIR spectrum of the compound from certain chromatographic bands with the ATR-FTIR spectrum of a standard compound. The open access SpectraBase TM (John Wiley & Sons, Inc., Hoboken, NJ, USA) [8] is a free database of IR, NMR, Raman, UV, and mass spectra, containing hundreds of thousands of spectra provided by Wiley. Spectra can be searched by name, International Chemical Identifier (InChI) key, and Chemical Abstracts Service (CAS) number. Spectra of unknown compounds isolated from chromatograms can be superimposed with the spectrum from the database for comparison. Combined with effect-directed assays and ATR-FTIR spectroscopy, hyphenated HPTLC allows an effect-directed high-throughput screening and fast characterization of the active compound. HPTLC combined with effect directed analysis has been previously used to detect biological active compounds on chromatograms [9]. Combined with effect-directed assays and attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy, hyphenated HPTLC has allowed a fast characterization of the compound responsible for α-amylase inhibition in Mediterranean culinary herbs [10]. Compounds with biological activities from five native Australian plants were identified via ATR-FTR spectroscopy [11]. ATR spectral analysis of this bioactive band on chromatograms has tentatively identified an oleanolic acid derivative to be responsible for αamylase inhibition. FTIR spectra are typically measured in the mid-IR region (4000 to 400 cm −1 ) of the electromagnetic spectrum. When organic molecules absorb IR radiation, the radiation is converted into molecular vibrations. Although the IR spectrum is not characteristic of the entire molecule, the energy required to vibrate a functional group such as a carbonyl (-C=O) is very similar in different compounds so the peaks occur at or near the same frequency regardless of the structure of the rest of the molecule. Thus, IR spectroscopy can be used to elucidate organic structure by providing structural/chemical characterization based on functional group vibrations. Characteristic absorption bands can be used for compound-specific detection or to verify quality markers in plant extracts or distillates while a fingerprint IR spectrum can be used to identify unknown compounds.

References
Attenuated total reflection (ATR) is a sampling technique which is considered a universal sampling accessory. Spectra are recorded directly in either the solid or liquid state, without sample preparation. The only sample preparation required is to apply pressure with the pressure applicator, if solid samples are analyzed. There is no need to apply pressure when liquid samples are analyzed. The quality of ATR-FTIR spectra is sufficient to allow identification when examined and compared to the reference spectra of pure compounds, on different portions of the spectrum. Despite a small interference from solubilized silica to sample identification, compounds isolated from certain chromatographic bioactive bands can be identified. The search-match results can be used to compare the ATR-FTIR spectrum of the compound from certain chromatographic bands with the ATR-FTIR spectrum of a standard compound. The open access SpectraBase TM (John Wiley & Sons, Inc., Hoboken, NJ, USA) [8] is a free database of IR, NMR, Raman, UV, and mass spectra, containing hundreds of thousands of spectra provided by Wiley. Spectra can be searched by name, International Chemical Identifier (InChI) key, and Chemical Abstracts Service (CAS) number. Spectra of unknown compounds isolated from chromatograms can be superimposed with the spectrum from the database for comparison. Combined with effect-directed assays and ATR-FTIR spectroscopy, hyphenated HPTLC allows an effect-directed high-throughput screening and fast characterization of the active compound. HPTLC combined with effect directed analysis has been previously used to detect biological active compounds on chromatograms [9]. Combined with effect-directed assays and attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy, hyphenated HPTLC has allowed a fast characterization of the compound responsible for α-amylase inhibition in Mediterranean culinary herbs [10]. Compounds with biological activities from five native Australian plants were identified via ATR-FTR spectroscopy [11]. ATR spectral analysis of this bioactive band on chromatograms has tentatively identified an oleanolic acid derivative to be responsible for α-amylase inhibition.