Synthetic Peptides against Plant Pathogenic Bacteria

The control of plant diseases caused by bacteria that seriously compromise crop productivity around the world is still one of the most important challenges in food security. Integrated approaches for disease control generally lack plant protection products with high efficacy and low environmental and health adverse effects. Functional peptides, either from natural sources or synthetic, are considered as novel candidates to develop biopesticides. Synthetic peptides can be obtained based on the structure of natural compounds or de novo designed, considering the features of antimicrobial peptides. The advantage of this approach is that analogues can be conveniently prepared, enabling the identification of sequences with improved biological properties. Several peptide libraries have been designed and synthetized, and the best sequences showed strong bactericidal activity against important plant pathogenic bacteria, with a good profile of biodegradability and low toxicity. Among these sequences, there are bacteriolytic or antibiofilm peptides that work against the target bacteria, plant defense elicitor peptides, and multifunctional peptides that display several of these properties. Here, we report the research performed by our groups during the last twenty years, as well as our ongoing work. We also highlight those peptides that can be used as candidates to develop novel biopesticides, and the main challenges and prospects.


Introduction
Losses in crop yield caused by plant diseases account for between 16 and 18 % of global agricultural productivity [1], which result in a substantial economic impact and endanger food security. Plant diseases caused by bacteria are the main factors limiting crop production. Some especially relevant plant pathogenic bacteria are Erwinia amylovora, Xanthomonas arboricola pv. vesicatoria and Pseudomonas syringae pv. syringae, the causal agents of fire blight in the Rosaceous family, the bacterial leaf spot on tomatoes and peppers and the floral bud necrosis, respectively [2,3]. The current effective approaches to control bacterial diseases are mostly based on the use of copper compounds or antibiotics, with the latter being allowed in several countries, but not in Europe [4,5]. However, their extensive use has adverse effects on the environment and human health, as well as on animal health, and evokes antibiotic resistance of bacterial pathogens [6]. Even so, the difficulty of control increases in the case of fastidious phytopathogenic bacteria, such as Xylella fastidosa and Candidatus Liberibacter asiaticus, for which there are still no effective methods for disease control in infected plants, due to the lack of appropriate bactericides and the difficulty of accessing the vascular vessels, where these pathogens propagate. Current control is based on preventive measures to limit their spread, such as eradication, pathogen-free propagation of plant material, exclusion, and vector control [7]. Taking the regulatory framework of pesticides (International Plant Protection Convention) into account, there is a strong need for alternative, environmentally compatible products to control phytopathogens. Antimicrobial peptides (AMPs) have been identified as good candidates for plant disease In this section, we describe the linear and cyclic peptides developed to find suitable leads as agents to control phytopathogens. With the aim of improving their biological activity profile, we have incorporated several modifications in the structure of these leads. All the research in this regard is described herein.

Linear Peptides
The linear peptides were first designed based on the structure of the 11-residue peptide Pep3 (WKLFKKILKVL-NH 2 ), derived from the hybrid peptide cecropin A(1-7)melittin (2)(3)(4)(5)(6)(7)(8)(9), which was reported to display antimicrobial activity against several phytopathogens [34,35]. Taking into account the structure of Pep3, 22 analogues were designed by reducing its length, changing the C-terminal amide group with a carboxylic acid, derivatizing the N-terminus and replacing the residues at positions 1 and 10 ( Figure 1A, Table 1). The best peptide BP76 resulted from the replacement of Trp 1 and Val 10 in Pep3 with Lys and Phe, respectively, and showed high activity against Ea, Xav and Pss (MIC values between 2.5 and 5.0 µM) and low hemolysis (34% at 150 µM) [36]. The ideal Edmunson wheel projection of BP76 was the basis for the design of a 125-member peptide library (CECMEL11) by incorporating amino acids with various degrees of hydrophobicity and hydrophilicity at positions 1 and 10 and also by varying the N-terminal derivatization [37]. This library allowed the identification of BP100 (KKLFKKILKYL-NH 2 ), which, apart from having a good biological activity profile in vitro (MIC values between 2.5 and 7.5 µM, 22% hemolysis at 150 µM), was also more effective than BP76 in vivo to treat Ea infections in detached apple and pear flowers and, interestingly, showed low oral acute toxicity in mice (LD 50 > 2000 mg/kg of body weight) [38].
With the aim of further improving the biological activity of BP100, four sets of analogues were designed by introducing different unnatural amino acids (D-, triazolyl or biaryl amino acids) or an acyl chain in its sequence ( Figure 1B, Table 1) [39]. First, 31 peptides, containing 1 to 11 D-amino acids, were prepared [40]. The incorporation of a D-amino acid is a widely used strategy to increase proteolytic stability and decrease hemolysis, while maintaining the antimicrobial activity. From this set, highlighted BP143 (KKLf 4 KKILKYL-NH 2 ) with a D-Phe 4 (MIC values between 2.5 and 7.5 µM, 4% hemolysis at 150 µM), which displayed high activity in planta assays, and it was as effective as streptomycin for the control of bacterial blight of pepper and pear, and fire blight of pear.
A second set of BP100 analogues incorporated a 1,2,3-triazole ring ( Figure 1B, Table 1). Eleven of these analogues were designed by derivatizing the side chain of each Lys in BP100 with a triazolyl moiety and three derivatives were obtained by replacing the benzene ring of Phe 4 with this heterocycle [41]. It is well-known that this ring is stable to hydrolysis and redox conditions, as well as to metabolic degradation. In addition, the introduction of this heterocycle into a peptidic chain is straightforward. Peptidotriazoles with significant activity were identified. In particular, BP250, resulting from the replacement of the benzene ring of Phe 4 with a benzyl triazole, displayed high antibacterial activity (MIC values between 1.6 and 12.5 µM) and no hemolysis (0% at 150 µM). The lower hemolytic activity of BP250 compared to BP100 could be attributed to the lower hydrophobic character of the triazole moiety compared to the benzene ring.
A third study, focused on the derivatives from the CECMEL11 library bearing a His or a 5-arylhistidine residue instead of Phe 4 , showed that this modification significantly reduced the hemolysis due to the hydrophilic character of the imidazole ring ( Figure 1B, Table 1) [42]. Thus, BP275 and BP279 that incorporated a His 4 or a His(5-Ph) 4 , respectively, were similarly active compared to the corresponding CECMEL11 derivatives and were considerably less hemolytic.
The fourth set consisted of lipopeptides derived from BP100 by acylating its Nterminus or by incorporating an acyl lysine residue at each position of this sequence [43]. Butanoyl, hexanoyl and lauroyl groups were selected as acyl chains. The introduction of a fatty acid into an antimicrobial peptide has been demonstrated to improve its biological activity because it facilitates the insertion into the membrane bilayer. The best lipopeptides were BP387 (MIC values between 1.6 and 6.2 µM, 11% hemolysis at 150 µM) and BP389 (MIC values between 0.8 and 12.5 µM, 16% hemolysis at 150 µM), which contain a butanoyl group at position 8 and 10, respectively. Interestingly, these sequences were more active than BP100 against the Xanthomonas species. From this set, 18 lipopeptides were chosen to reduce their hemolysis by incorporating a D-amino acid at position 4 [44]. This study led to the identification of BP475 (MIC values between 1.6 and 6.2 µM, 0% hemolysis at 150 µM), bearing a D-Phe 4 and a butanoyl group at position 10. Structural characterization of this lipopeptide by NMR revealed that it adopts an α-helix from residues 6 to 10, pointing out that the presence of D-Phe 4 disrupts this secondary structure. Similar to BP100 [45], this C-terminal α-helix may favor the insertion of this lipopeptide into the bacterial membrane bilayer, enhancing the activity.
All the above peptides were synthesized following solid-phase procedures, which is a very convenient methodology for the preparation of short peptide sequences. However, the production of peptides can also be achieved through biotechnology techniques using bacteria, yeasts or plants as biofactories. Towards this aim, peptides derived from BP100 were designed based on the structural requirements for their expression in rice plants and to facilitate the downstream process ( Figure 1C, Table 1). Thus, to achieve the minimum expressability length, BP100 was conjugated to other units of BP100 and to fragments of natural antimicrobial peptides, such as cecropin A, magainin and melittin [46]. One or two AGPA hinges were incorporated as a stabilitzation/distortion moiety. In addition, a signal for peptide retention in the endoplasmic reticulum (KDEL), a residue that acts as a protease recognition site (Ser or Gly) and an epitope tag for peptide detection or purification (tag54) were included. It was observed that the presence of a KDEL unit or of tag54 did not affect the biological activity. The best peptide conjugates were BP209, BP210 and BP211 (MIC values between <1.25 and 5.0 µM; 1-17% hemolysis at 150 µM), resulting from the conjugation of BP100 to a magainin fragment through an AGPA hinge. Among the peptides including the KDEL retention signal sequence, BP178 that incorporated BP100 and magainin (1-10) was the more active against Ea, Xav and Pss, being also low hemolytic, and it was chosen for its expression in plants. The BP178 gene was efficiently expressed in transgenic rice seed endosperm, where the peptide stably accumulated at 21 µg/g of seed.
Interestingly, the seedlings of transgenic lines showed enhanced protection to bacterial phytopathogens [47].

Cyclic Peptides
Cyclic peptides were de novo designed based on the general features described for antimicrobial peptides. Thus, cyclic peptides that contained 4 to 10 residues and incorporated hydrophilic (Lys) and hydrophobic (Leu, Phe and D-Phe) amino acids at alternating positions were prepared ( Figure 2, Table 1). In addition, a Gln was incorporated at position 10 to facilitate the solid-phase synthesis. The general formula of these peptides was c(X n -Y-X m -Gln), where X was Lys or Leu, Y was L-Phe or D-Phe, m = n = 1 or m = 3 and n = 0 to 5 [48]. The most active cyclic peptide was BPC16 (c(KLKLKFKLKQ)), which displayed MIC values between 6.2 and 12.5 µM against Pss and Xav and it was not active against Ea.
To improve the biological activity of BPC16, two combinatorial libraries were designed ( Figure 2, Table 1) [49]. The first one comprised 56 cyclic decapeptides and contained Phe and Gln at positions 6 and 10, respectively, and all possible combinations of five Lys and three Leu at the other positions. From this library, the first cyclic peptides reported with activity against Ea were identified (MIC values between 12.5 and 25 µM). The second library of 16 sequences obeyed the general structure c(X 1 XXX 4 LysPheLysLysLeuGln), where X was Lys or Leu. From this library, the peptides BPC194 (c(KKLKKFKKLQ)) and BPC198 (c(KLKKKFKKLQ)) stood out for their good biological activity. BPC194 was more active against Ea (MIC values between 6.2 and 12.5 µM) than the best cyclic peptides from the first library and, in addition, both peptides were poorly hemolytic (10-13% at 150 µM). In a later study, Phe 6 in these libraries was replaced by a Trp. The results showed that, in general, the sequences obtained were more active against Xav, Pss and Ea than the ones with Phe and showed similar hemolysis [50]. This study allowed the identification of cyclic peptides BPC086W (c(LKKKLWKKLQ)) and BPC108W (c(LKKKKWLLKQ)), with MIC values between 0.8 and 12.5 µM against these bacteria and hemolysis ≤8% at 125 µM. The active conformation of BPC194 and BPC198 was predicted by molecular dynamics simulations [51]. These conformations were the basis for the design of 15 new analogues. The best three sequences were as active as the parent peptides. Moreover, the orientation of the hydrophilic pair interactions in the active conformation of these three peptides was analogous to that in BPC194 and BPC198, but the position of the hydrophobic residues was different.  [36,37], design of analogues (B) [39][40][41][42][43][44], and derivatives for expression in plant systems (C) [46], as described in Section 2.1.  [36,37], design of analogues (B) [39][40][41][42][43][44], and derivatives for expression in plant systems (C) [46], as described in Section 2.1. From the lead peptide BPC194, two sets of analogues were designed, bearing a 1,2,3triazole ring and/or an acyl chain ( Figure 2B, Table 1). The triazolyl derivatives resulted from replacing Leu 3 with Ala, Glu, Lys or a Nle that incorporated a 1,2,3-triazolyl substituent at the side chain. Except for the Glu derivative, the other modifications were also included at position 5 in BPC194 instead of Lys [52,53]. This work led to cyclic peptidotriazoles BPC548 and BPC550, bearing a substituted triazolylnorleucine at position 3, with high antibacterial activity (MIC values between 3.1 and 25 µM) and low toxicity (7-12% at 150 µM).

Cyclic Peptides
The cyclic lipopeptides derived from BPC194 contained a fatty acid group at the N ε -amino group of a Lys residue ( Figure 2B, Table 1) [54,55]. The length and the position of the acyl chain was evaluated, as well as the incorporation of one or two D-amino acids and of a His. In particular, different Lys residues in BPC194 were derivatized with acyl groups of different lengths, ranging from 4 to 18 carbon atoms. In addition, Phe 6 or the acylated Lys were replaced with the corresponding D-enantiomer. Phe 6 was also replaced with a His. From the 51 cyclic lipopeptides prepared, those with the highest activity contained the acyl group at Lys 1 , Lys 2 or Lys 5 . It was observed that the presence of a D-amino acid maintained the activity and reduced the hemolysis. The incorporation of a His also resulted in a decrease in the hemolytic activity. Among the most active sequences, BPC702 was highlighted. This cyclic lipopeptide incorporated D-Lys 5 acylated with a butanoyl group, and displayed MIC values < 12.5 µM against Xav and Pss and low hemolysis (1% at 150 µM). Ac-KKLfKKILKK(COC 3 H 7 )L-NH 2 3.1-6.2 3.1-6.2

Plant Defense Elicitor Peptides
Antimicrobial peptides not only work directly against pathogens, but they can also act as plant defense elicitors and inducers of resistance to infections (IR). Two types of IR have been described in plants, including one that is basically pathogen-induced (systemic resistance, SAR) and another one that is caused by the colonization of plant roots by beneficial microorganisms (systemically induced resistance, ISR). This IR can be induced by molecular patterns and other molecules, including peptides [56].
With the aim of finding antimicrobial peptides that are able to trigger plant defense responses, we undertook several studies in which the following peptide elicitors were used as positive controls: PIP-1 (YGIHTH-NH 2 ) [57], Pep-13 (VWNQPVRGFKVYE-OK) [58] and flg15 (RINSAKDDAAGLQIA-OH), which corresponds to 15 amino acids of the N-terminal conserved domain of the well-known bacterial flagellin [59,60]. The sequences tested for their capacity to induce plant defenses included cyclic peptides, linear peptides from the CECMEL11 library, lipopeptides derived from BP100, cyclic lipopeptides derived from BPC194, linear and cyclic peptidotriazoles, as well as peptide conjugates derived from BP100 [10,43,61,62]. The best results were obtained for the linear peptide BP13, the cyclic peptide BPC200W, the linear lipopeptide BP378, and the peptide conjugates flg15-BP16 and BP178 (Table 2). Notably, these two peptide conjugates also display high antibacterial activity; therefore, they can be considered as bifunctional compounds.

Bifunctional Peptides
The interesting biological activity profiles exhibited by the above peptide conjugates flg15-BP16 and BP178 prompted us to further explore this type of compounds. In fact, the conjugation of two antimicrobial peptides in a single sequence provides new peptides with improved activity compared to the individual monomers. However, reports on peptide conjugates, resulting from the combination of two monomers with distinct activity, are scarce. Within this context, we decided to design peptide conjugates that contained an antimicrobial peptide (BP16, BP100, BP143, KSLW, BP387, BP475) at the N-or C-terminus of a plant defense elicitor peptide (flg15, BP13, Pep13, PIP-1) [62,63]. Analysis of the in vitro and in planta activity provided two bifunctional peptide conjugates, flg15-BP475 and flg15-BP16, that were able to reduce Ea infections in pear plants and Xav infections in tomato, respectively, through a dual mechanism ( Table 2). On the one hand, they showed high antibacterial activity and, on the other hand, they triggered plant defense responses.
The peptides that incorporated a 1,2,3-triazole ring were synthesized through the reaction of an alkynyl peptidyl resin with an azide or by treatment of an azido peptidyl resin with an alkyne. The linear biaryl peptides were prepared via a Suzuki-Miyaura reaction by treating a bromopeptidyl resin with a boronic acid in solution. Alternatively, the biaryl bond was formed through the reaction of a boronopeptidyl resin, prepared by borylation of the corresponding bromopeptidyl resin, with an aryl iodide or bromide in solution.
The preparation of lipopeptides involved the synthesis of a sequence that incorporated a lysine residue with the side chain protected with 1-(4,4-dimethyl-2,6-dioxocyclohex-1ylidene)-3-methylbutyl (ivDde). This group can be selectively removed in mild conditions that neither affect the other protecting groups nor the linkage of the sequence with the solid support. The acyl chain was incorporated using the same conditions as those of the amino acid coupling.
Once the synthesis of the sequence was completed, peptides were cleaved from the support, purified on a CombiFlash Rf200 automated flash chromatography system using a RediSep Rf Gold reversed-phase column packed with high-performance C 18 derivatized silica (Teledyne ISCO, Lincoln, NE, USA). They were analyzed under standard analytical HPLC conditions with a 1260 Infinity II liquid chromatography instrument (Agilent, Santa Clara, CA, USA), using a Kromasil 100 C 18 (4.6 mm × 40 mm, 3 µm) column. Peptides were characterized by electrospray-ionization mass spectrometry (ESI-MS) with an Esquire 6000 ESI ion trap LC/MS instrument (Bruker Daltonics, Billerica, MA, USA), equipped with an electrospray ion source. The instrument was operated in the positive ESI(+) ion mode. High-resolution mass spectrometry (HRMS) data were recorded on a Bruker MicroTof-QIITM instrument (Bruker Daltonics, Billerica, MA, USA), using ESI ionization sources. The instrument was also operated in the positive ion mode.

Activity of Peptides against Plant Pathogenic Bacteria
The use of peptides as control methods against plant pathogenic bacteria is mainly focused on the direct effect of peptides against the pathogens. Nevertheless, nowadays, there is evidence that some peptides can act in an indirect manner through the induction of the plant defense response. More information can be found in previous reviews [11,56]. Our research has taken into account both approaches, including the antibacterial activity and the ability to elicit the plant defense response.

In Vitro Activity
To determine the in vitro antibacterial activity of the peptides, the biological characteristics of the pathogens have to be taken into account, including their ability to grow on culture plates and their nutritional needs. Almost all of the phytopathogenic bacteria that we studied grew well in nutritional broth and agar plates and did not have complex nutritional requirements. Therefore, although some of bacteria of the genus Pseudomonas, Erwinia, and Xanthomonas are considered quarantine phytopathogens in some zones (found in the entire EU territory but not in some countries or zones, EU 2019/2072 of 28 November 2019), conventional methods, such as viable plate counting, could be used. Depending on the type of antimicrobial activity to be assessed after exposure of the pathogens to the peptides, several methodologies could be employed, such as those that determine the metabolic activity of cells or the amount of the free DNA in the sample due to pore formation ( Figure 3). The most widely used methodology is the growth inhibition test in nutritional broth by measuring the optical density ( Figure 3A). However, it has to be noted that this test does not allow to determine if the peptide has bacteriostatic or bactericidal activity. To determine the killing activity, contact tests should be used, and the effect can be measured as culturable cells recovered or metabolic activity (e.g., resarzurin). The bacteriolytic activity can be determined using the dye SYTOX green, which binds to free DNA and is able to enter the cells with damaged membranes due to the formation of pores by the peptide (Figure 3B).

Defense Elicitor Activity of Peptides in Plants
To determine the defense elicitor activity of the peptides, we started analyzing the capacity of selected peptides to induce extracellular pH changes and hydrogen peroxide production in tobacco cell cultures that are considered indicators of eliciting activity [61]. However, an in planta screening platform was preferred, so, we developed a platform in which tomato plant was used as a model plant and peptides were applied through a spray. The expression of defense-related genes was assessed by performing a retrotranscription of the RNA extracted from the plant coupled to a quantitative PCR, using actine as the endogenous gene for the normalization of the results and the ∆∆Ct method to perform the relative quantification of the treatment compared to the non-treated control [49]. Different types of peptides were tested, such as linear, cyclic and conjugates [43,61,62,64,65]. The results were promising and allowed the identification of peptide conjugates, incorporating an antimicrobial peptide and a plant defense elicitor peptide, that displayed bifunctional activity.
Taking into account the promising results of the peptide conjugates, in particular those of BP178, experiments were carried out taking into account the whole genome of the plants, including microarrays in tomato plants and RNAseq in Prunus dulcis using the Illumina platform. A microarray analysis of tomato plants (GeneChipTM tomato gene 1.0 ST array (Affymetrix)), treated with BP178, was performed. flg15, ethylene (ET), salicylic acid (SA) and jasmonic acid (JA) were used as the reference compounds [10]. It could be concluded that BP178 elicits a similar gene expression pattern related to defenses than flg15 and that it is related to several defense pathways (ET, SA, JA) ( Figure 3C). Nevertheless, using tomato plant as a model system does not mean that the observed response will be the same in other plants of interest. Therefore, it is better to use the desired host of study whenever possible. In that sense, BP178 was applied by endotherapy to almond plants, which were analyzed using RNAseq to obtain a holistic view of the effect of the peptide in the almond transcriptome. The results confirmed the observations obtained in tomato plants regarding the ability of BP178 to elicit a defense response [62].

Other Activities
Other activities that need to be taken into account for the development of a peptidebased product are the phytotoxicity, the protease susceptibility and the hemolytic activity ( Figure 4). To assess the phytotoxicity, peptides are placed into the mesophyll of tobacco plants and the diameter of the lesion they cause is measured. This assay shows the direct activity of peptides in plant cells, which must be taken into account when selecting the peptides to be tested in planta.
Another parameter to consider is the susceptibility of peptides to protease degradation, since they will be exposed to proteases once applied to the plants. If the peptides are not resistant enough, their half-life time will be low. With that in mind, the sequence of the lead peptides has been modified through the incorporation of unnatural amino acids, as mentioned above. For example, BP143, which bears a D-Phe 4 , displayed 18% degradation after being exposed to proteinase K for 1 h compared to its parent peptide BP100, which showed 75% degradation [40].
Finally, hemolytic activity is the capacity to lyse erythrocytes, which may give an idea of the peptide toxicity. Therefore, it is important for peptides to display low hemolysis, since it will indicate that they are safe for the manipulators in future field applications. Many peptide modifications have allowed us to obtain peptides with similar or higher antimicrobial activity and, at the same time, with lower hemolytic activity. This is the case of BP143, in which the incorporation of a D-Phe 4 in BP100 led to a reduction in the rate of hemolysis from 54% to 5% [40].  The results of tobacco leaf infiltration and the hemolysis assays are indicative of the potential toxicity of peptides. However, toxicity tests on whole plants or animals have to be performed before further development stages, because the main method of interaction of peptides with humans and animals will be dermal, by inhalation or oral ingestion. Therefore, it is essential to know the acute toxicity of these compounds. Based on this, peptides BP100, BP76 and BP15 were tested for oral acute toxicity in mice, with the median lethal dose (LD50) and the lower limit lethal dose (LLD) being higher than 1000-2000 mg/Kg of body weight, which is considered a very low oral toxicity [66].

Control of Infections in Plant Material Caused by Phytopathogenic Bacteria in Controlled Environment Conditions
To assess the activity of peptides in vegetal material in controlled environment conditions, two strategies were performed. One strategy consists of using detached vegetal material, such as leaves, flowers or immature fruits and the other consists of using the whole plant under greenhouse conditions. For example, while developing analogues of BP100 that contained a D-amino acid in their sequence, a first experiment was performed with all the analogues using pear tree The results of tobacco leaf infiltration and the hemolysis assays are indicative of the potential toxicity of peptides. However, toxicity tests on whole plants or animals have to be performed before further development stages, because the main method of interaction of peptides with humans and animals will be dermal, by inhalation or oral ingestion. Therefore, it is essential to know the acute toxicity of these compounds. Based on this, peptides BP100, BP76 and BP15 were tested for oral acute toxicity in mice, with the median lethal dose (LD 50 ) and the lower limit lethal dose (LLD) being higher than 1000-2000 mg/Kg of body weight, which is considered a very low oral toxicity [66].

Control of Infections in Plant Material Caused by Phytopathogenic Bacteria in Controlled Environment Conditions
To assess the activity of peptides in vegetal material in controlled environment conditions, two strategies were performed. One strategy consists of using detached vegetal material, such as leaves, flowers or immature fruits and the other consists of using the whole plant under greenhouse conditions. For example, while developing analogues of BP100 that contained a D-amino acid in their sequence, a first experiment was performed with all the analogues using pear tree leaves for Pss, pepper leaves for Xav and pear immature fruits for Ea. This experiment allowed us to select the analogues BP143 and BP145. Afterwards, these peptides were applied to whole plants using the same pathosystems, which demonstrated that BP143 was as effective as streptomycin. Its activity was also greater than BP100 in controlling Pss and Xav [40]. Aside from these analogues based on D-amino acid substitutions, the linear peptide BP13 and the cyclic peptide BPC200W were also tested in pear trees, since they had antibacterial activity and were able to elicit the plant defense response. These peptides were applied using two different treatment schedules (two or three treatments before the inoculation of the pathogen); BP100 and BP143 were added to the experiment as reference peptides. The reference peptides only showed a significative reduction in the disease when three treatments were used, whereas BP13 and BP200W were effective in all treatments [61].
Regarding the bifunctional peptide conjugates, an experiment was performed with flg15-BP16 to assess their ability to control Ea infections on pear plants, when applied 48 h before the inoculation of the pathogen. In this experiment, the plants were also treated with the monomers of the conjugate, flg15 and BP16, independently and combined for comparative purposes. The results showed that flg15-BP16 and its monomers applied together (BP16 and flg15) presented similar values to those of the treatment with kasugamycin [62]. In the case of other peptide conjugates, the effect of changing the elicitor peptide (flg15 or PIPI), but not modifying the antimicrobial peptide (BP475), and the other way around by changing the antimicrobial peptide (BP475 or BP387), but keeping the elicitor peptide (flg15), was studied for the control of infections caused by Xav in pepper plants. Peptide conjugate flg15-BP475 showed an efficacy similar or higher than copper oxychloride ( Figure 5) [63]. All these results are summarized in Table 2. The peptide conjugate BP178 was tested in tomato plants to control Xav and Pst infections. BP178 was applied using a spray and the results were compared to those obtained for BP100. When BP178 was applied preventively 1 day before the inoculation of the pathogen, 70% efficacy in the control of the disease severity was observed. In addition, tomato plants with BP178 showed significantly increased expression of about 100 genes of which 74.4% were related to plant defense and, particularly, to biotic stress responses using microarray analysis ( Figure 3C) [10]. applied using a spray and the results were compared to those obtained for BP100. When BP178 was applied preventively 1 day before the inoculation of the pathogen, 70% efficacy in the control of the disease severity was observed. In addition, tomato plants with BP178 showed significantly increased expression of about 100 genes of which 74.4% were related to plant defense and, particularly, to biotic stress responses using microarray analysis (Figure 3C) [10].    [62]. Picture shows the disease symptoms in tomato leaves (red arrows).

Concluding Remarks
In summary, significant research has been carried out regarding the development of peptides as agents to control plant pathogenic bacteria of economic importance. Linear and cyclic peptides have been designed and synthesized, which have provided leads that have been further optimized by incorporating several structural modifications. This approach led to the identification of sequences with high antibacterial activity, low hemolysis and high stability to protease degradation. In addition, our research has not only focused on peptides that kill bacteria, but also on sequences with the ability to elicit plant defense responses. The achievement of these purposes has required the improvement of methods and technologies for the in vitro and/or in planta screening of a large number of compounds for their antibacterial, hemolytic and phytotoxic activities, as well as for their defense elicitor activity in plants.
The research along these lines has resulted in sequences with distinct biological activities, including antibacterial peptides, plant defense elicitor peptides and sequences with both activities. Thus, we have developed a versatile platform that can be useful at finding, with a certain guarantee of success, peptides that are able to control plant diseases caused by other bacteria. Moreover, the best peptides constitute good candidates with suitable properties to be further developed as effective phytosanitary products for their use in agriculture. Therefore, these peptides represent an alternative strategy that should be taken into account in the management of plant diseases in fields. Multidisciplinary work that involves different research areas, such as microbiology, organic chemistry and combinatorial chemistry, and phytopathology, is crucial in achieving our goal.

Ongoing Research
Nowadays, our research on the use of peptides as biopesticides is focused on the control of the xylem-restricted quarantine phytopathogen Xylella fastidiosa (Xf), which is the cause of several quarantine diseases found in the EU, such as the olive quick decline (OQDS), and on the control of the floem-restricted Candidatus Liberibacter asiaticus (CLas), causing citrus huanglongbing (HLB), previously called citrus greening disease, which is one of the most destructive diseases of citrus worldwide. The assessment of the antimicrobial activity of peptides against Xf and CLas is challenging because the former is a fastidious phytopathogen microorganism with a slow growth rate and special nutritional requirements, and the latter is considered a non-culturable microorganism. In the case of Xf, the previously mentioned conventional methods to assess the activity of peptides, such as the in vitro contact test, can be used but their antimicrobial activity can be overestimated [67]. Therefore, methodologies based on molecular methods had to be developed. These methods allow for the evaluation of bacterial viability, without taking into account its culturability [67,68]. Regarding CLas, researchers are using Liberibacter crescens, which is the closest cultured relative of this important uncultured crop pathogen.
The formation of biofilm in the xylem vessels of the host is one of the main pathogenicity mechanisms of X. fastidiosa; thus, we adapted a methodology using crystal violet [69] to identify peptides with antibiofilm activity against these bacteria [70]. We also focused our attention on the design of peptides that targeted the pathogenicity functions of X. fastidiosa. Furthermore, we are currently studying the peptides that are able to elicit defense responses in almond plants, because it is one of the most important crops in our research.
In addition, we have performed in planta experiments in Prunus dulcis Avijor inoculated with X. fastidiosa and treated with the bifunctional peptide BP178 using endotherapy. The peptide was applied using a preventive and a curative strategy, in addition to a combination of both. The results showed that the combined strategy (preventive and curative) is able to reduce the population levels of X. fastidiosa and the disease severity [71].

Conflicts of Interest:
The authors declare no conflict of interest.