Integrated Economic and Environmental Assessment ‐ Based Optimization Design Method of Building Roof Thermal Insulation

.


Introduction
The building sector has long been the main consumer of the world's energy [1].Existing buildings account for about 40% of the total energy consumption in the United States, Europe, and the other developed countries [2].The proportion of building energy consumption of the total social energy consumption is about 25% in China [3].The roof is the part of the building envelope that receives the most solar radiation.A great deal of external heat is transferred into the building through the roof.The employment of roof insulation is one of the most effective ways of reducing building energy consumption [4].
However, the production process of roof thermal insulation consumes massive amounts of energy and produces a large amount of environmental pollutants [5][6][7].Therefore, the design of roof thermal insulation is not only an economical issue, with the aim of reducing building energy consumption, but also an environmental issue, with the aim of reducing the impact of thermal insulation production on the environment [8,9].It has become more and more important to develop a comprehensive economic and environmental optimization method for thermal insulation in building roofs [10].
Many researchers have focused on the economic analysis of building thermal insulation [11].The goal of economic analysis of building insulation is to minimize the sum of the energy consumption costs of HVAC systems and thermal insulation investment costs over the whole life cycle [12].The energy consumption cost of an HVAC system is closely related to the economic performance of thermal insulation.Therefore, many different methods are used to predict the energy consumption of walls and roofs [13], such as cooling and heating degree-day analysis [14][15][16], energy consumption prediction models [17][18][19], and energy consumption simulation software [20][21][22].The operating time of an HVAC system assumed in the degree-day estimation method is inconsistent with its actual operating time [23].The degree-day estimation method cannot predict the building energy consumption accurately, which will affect the accuracy of economic analysis results [24][25][26].There is still a lack of accurate double-skin ventilation roof heat transfer models which can forecast building roof energy consumption accurately.Moreover, existing energy consumption simulation software also cannot predict energy consumption of the double-skin ventilation roof accurately [27].Therefore, the development of accurate double-skin ventilation roof heat transfer models is very important to determine the optimal insulation thickness in double-skin ventilation roofs [28][29][30].
On the other hand, some researchers have also paid attention to the environmental impacts of building products [10].Wi et al. [31] evaluated the pollutant emissions of 18 kinds of construction products during their combustion process quantitatively.Dylewski and Adamczyk [32] presented a method to assess the environmental benefits of four types of wall thermal insulation in heating buildings in Poland.Furthermore, they conducted an analysis of the environmental impact of polystyrene plaster in the external walls of heating buildings in Poland [33].Buyle et al. [34] pointed out that the research on energy saving and on the use of eco-friendly materials were important research fields for life cycle assessment (LCA) in the building construction industry.Monteiro et al. [35] assessed the environmental impact of building envelope construction with varying thermal performance of a house in Southwest Europe under two operating patterns using the LCA method.
Existing studies have investigated the economic performance and the environmental performance of building thermal insulation, respectively.However, studies on the combined economic and environmental benefits of thermal insulation in buildings are insufficient [8,9], which is not conducive to selecting an appropriate building thermal insulation design scheme.Therefore, it is necessary to develop an integrated economic and environmental assessment-based optimization design method of building roof thermal insulation, which is presented in this paper.The novelty of this study is in developing an accurate double-skin ventilation roof heat transfer model for predicting the roof energy consumption and presenting an integrated economic and environmental assessmentbased optimization design method for building roof thermal insulation.The study proposed in this paper can search for the optimal roof thermal insulation design scheme to improve the energy response of the building roofs.It is able to respond simultaneously to economic issues, environmental issues, energy savings, and the sustainability of building roof thermal insulation [10].The remainder of this paper is organized as follows.Section 2 presents the overview of the integrated economic and environmental assessment-based optimization design method.Section 3 provides a description of the building and environmental cost analysis of thermal insulation.Section 4 presents the results and discussions of the optimization design method for roof thermal insulation.Finally, a conclusion is drawn.

Overview of the Optimization Design Method for Roof Insulation
An integrated economic and environmental assessment-based optimization design method is presented in this paper for building roof thermal insulation using the economic analysis model, environmental analysis model, and an integrated dimensionless assessment index, comprehensively.Figure 1 shows the block diagram of the integrated economic and environmental assessment-based optimization design method for roof insulation.A zonal method-based double-skin ventilation roof heat transfer model is presented and used to predict roof energy consumption.The traditional P1-P2 economic analysis model is utilized to analyze the economic benefits of roof insulation.The LCA-based environmental analysis model is used to analyze the environmental benefits of roof insulation.An integrated dimensionless economic and environmental assessment index is presented to evaluate thermal insulation in building roofs.The integrated dimensionless assessment index can eliminate the influence of different units of economic benefit and environmental benefit.The optimum thermal insulation of building roofs is determined by maximizing the sum of economic benefit and environmental benefit due to thermal insulation.The thermal insulation with the maximum integrated assessment index is the best candidate insulation design solution for building roofs.In the integrated economic and environmental assessment-based optimization design method, economic benefit is determined by using the general LCA-based economic analysis model of roof insulation.Environmental benefit is also determined by using the general LCA-based environmental analysis model.The assigned economic and environmental weight coefficients of the comprehensive assessment index can be determined according to actual engineering needs, promoting LCA applications in building construction industry.Therefore, the integrated economic and environmental assessmentbased optimization design method presented can be applied to building roofs in different climatic regions and different thermal insulation materials.The integrated economic and environmental assessment-based optimization design method presented can be used to find the best candidate insulation design scheme for a building's roof, including the determination of roof thermal insulation type and the optimum insulation thickness.

Zonal Method-Based Double-Skin Ventilation Roof Heat Transfer Model
In a double-skin ventilation roof, radiation heat transfer is highly coupled with natural convection heat transfer.It is necessary to develop heat transfer models and to understand the heat transfer mechanism of a double-skin ventilation roof.Some solar radiation heat absorbed by the upper roof is transferred to the external atmospheric environment by radiation heat transfer and convection heat transfer.The other solar radiation heat absorbed by the upper roof is mainly transferred to the lower roof by radiation heat transfer.Some heat will be transferred to the external atmospheric environment along with the natural ventilation airflow in the air gap between the upper and lower roofs.Figure 2 shows the heat transfer mechanism of a double-skin ventilation roof.The double-skin ventilation roof heat transfer model is a typical 2D model with lateral and vertical heat transfer.As shown in Figure 2, there are three layers (i.e., the upper roof layer, air gap layer, and lower roof layer) from the outside to the inside of a doubleskin ventilation roof.Each layer is divided into several cells according to the length of the double-skin ventilation roof.In order to simplify the heat transfer calculation process, the following assumptions are made: (1) each cell of the layers is uniform; (2) the physical properties of the center point can stand for the whole cell; (3) the porous material is continuous, uniform, and isotropic; (4) the physical parameters of the material are constant without changing with temperature; (5) conductive heat transfer in the slope direction of the sloping roof layers is neglected; and (6) the thermal conduction of the adjacent zones in the slope direction of the sloping roof is neglected.
where m is the quality, kg.c is the specific heat capacity, J/(kg • K). where is the temperature of the i-1th control unit of the air gap, K.
where i dn A , is the area of the ith control unit of the lower roof, m 2 .
in dn h  is the convective heat transfer coefficient between the lower roof and the indoor air, W/(m 2 •K).In this study, T , is the indoor surface temperature of the ith control unit of the lower roof, K. in T is the indoor air temperature, K.
To solve the partial differential equations of Equations ( 1), (4), and ( 5), these partial differential equations must be linearly discretized, and the solution method of linear equations is used to solve these partial differential equations.In this study, the difference method is used to discretize the partial differential equations.Equations ( 6)-( 8) are the discrete forms of Equations ( 1), (4), and (5), respectively.
The thermal pressure in the air gap between the upper and lower roofs is the result of the joint action of air flow in various zones.The thermal pressure in the air gap between the upper and lower roofs ( th P  ) can be calculated by Equation ( 9): where


is the density of the ith control volume of the air gap between the upper and lower roofs.

Validation of the Double-Skin Ventilation Roof Heat Transfer Model
The temperature and airflow of a double-skin ventilation roof can be predicted using the zonal method-based double-skin ventilation roof heat transfer model under different outdoor air meteorological conditions and indoor air temperature conditions.The doubleskin ventilation roof heat transfer model was validated by comparing the predicted and measured inner surface temperatures of the building roof.The inner surface temperature of a single-skin sloping granary roof and a double-skin ventilation sloping granary roof were measured and gathered at 10 min intervals in Changsha region from 29 July 2017 to 30 July 2017.The measured temperature was the average temperature of three different adjacent measuring points in the center line of the sloping roof.The single-skin sloping granary roof consisted of a 40 mm fine aggregate concrete layer, a 20 mm cement mortar layer, a 4 mm waterproof coiled material layer, a 20 mm cement mortar layer, an 80 mm fly ash ceramsite concrete layer, and a 350 mm reinforced concrete layer, from top to bottom.The double-skin sloping granary roof consisted of a 100 mm reddish-brown tile roof (upper granary roof) and a reinforced concrete roof (lower granary roof), as shown in Figure 3.The initial temperature of the roof was the average temperature of the measured roof inner surface temperature for 29 July 2017.Figure 4 shows the measured and predicted inner surface temperatures of the building roofs.The maximum temperature difference and the average temperature difference between the measured and predicted single-skin roof inner surface temperatures were 1.1 °C and 0.33 °C, respectively.The maximum temperature difference and the average temperature difference between the measured and predicted double-skin ventilation roof inner surface temperatures were 0.8 °C and 0.12 °C, respectively.The maximum percentage error between the measured and predicted roof inner surface temperature were 6.7% and 8.2% for the single-skin roof and the doubleskin ventilation roof, respectively, which is an acceptable value of prediction accuracy in engineering applications.

Determining the Energy-Consumption Cost of Building Roof
The hourly cooling load of the double-skin roof was predicted by using the doubleskin ventilation roof heat transfer model under outdoor meteorological conditions.The hourly cooling load of the single-skin roof at different conditions was predicted by using the COMSOL Multiphysics software.The annual roof cooling load ( c Q ) can be calculated by summing up the hourly cooling load of roof throughout the year.
where c q is the hourly cooling load per square meter of roof, W/m 2 .c D is the number of cooling days of the building throughout the year.
Q is the total cooling load with thermal materials, W/m 2 .
Energy consumption cost ( c E ) caused by roof cooling load per square meter can be calculated by Equation (12).
where c E is the energy consumption cost, USD/m 2 .
sa EC represents the energy-saving cost of roof per square meter due to thermal insulation, USD/m 2 .Z is the electricity price, Z = 0.088 USD/KWh [18].EER is the energy efficiency ratio of air-conditioning systems installed in the building, EER = 2.3 [18].

LCA-Based Economic Analysis of Roof Insulation of Building
The traditional 2 1 -P P economic model [37], which is a typical life cycle assessment method, was used to analyze the economic performance of roof insulation.In the P is the ratio of total roof energy consumption cost in the life cycle to the roof energy consumption cost in the first year.1 P is the present value factor of roof energy consumption cost in the life cycle, which is positively proportional to all expenses related to roof energy consumption [37].
where PWF is the discount factor.f is bank deposit interest rate, 1%  f [38].d represents the inflation rate, 5%  d [39].c N represents the economic analysis period, 20  c N years [15].

2
P is the ratio of the total investment to the initial investment of thermal insulation in the life cycle.2 P is inversely proportional to all expenses related to the initial invest- ment of the thermal insulation [37].(15) where, D represents the down payment proportion of thermal insulation, % 100  D [38].M represents the ratio of annual maintenance cost to initial investment cost of thermal insulation, 0  M [39]. .s is the loan interest rate of thermal insulation.R is the recycling price ratio of thermal insulation, 0  R [38].Life cycle total investment cost ( LCT ) is the sum of roof energy consumption cost and investment cost of thermal insulation.Life cycle saving ( LCS ) is the difference between the energy-saving cost of roof and investment cost of thermal insulation in the life cycle.LCT and LCS are calculated by Equations ( 16) and (17), respectively [37].

LCA-Based Environmental Analysis of Building Roof Insulation
The traditional LCA-based environmental assessment methods include the midpoint environmental assessment (problem-oriented) method and the end-point environmental assessment (damage-oriented) method [41,42].The mid-point LCA environmental assessment method is often adopted to evaluate the environmental themes involving ozone depletion potential impact, global warming potential impact, and acidification potential impact [43].The end-point LCA environmental assessment method is usually utilized to evaluate environmental impacts including human health, natural environment, and resources quantitatively [44][45][46].In the end-point LCA environmental assessment method, the environmental damage is evaluated in the form of scores for the production and production environmental impacts of concern [47,48].In this study, the end-point LCA environmental assessment method is adopted to assess the environmental impacts of roof insulation quantitatively.
The negative environmental impact is the environmental cost per unit area of the thermal insulation ( co EN ).co EN is closely related to thermal insulation type and insula- tion thickness.The co EN of roof thermal insulation can be calculated by the following formula [31]: where, co EN is the environmental cost per unit area of the thermal insulation, Pt/m 2 .l K represents the environmental load generated by the use of 1 m 3 of thermal insulation in the roof, Pt/m 3 .Thermal insulation can reduce roof energy consumption, and the reduction in energy consumption will bring in the environmental income of energy saving ( sa EN ).The envi- ronmental income of energy saving is closely related to thermal insulation type and insulation thickness.sa EN can be calculated by the following equations:

Z
is the energy consumption of 1 m 2 of roof with a  thermal insulation thickness, KWh/(m 2 •year).e k is the environmental cost of 1 KWh of energy consumption of roof, Pt/KWh.A is the external surface area of the roof, m 2 .re A is the usable roof area, m 2 .In this study, A = 890.6 m 2 and re A = 864 m 2 .
The environmental benefit ( ENB) of thermal insulation in a roof is the difference be- tween the environmental income of energy saving and the environmental cost of the thermal insulation.ENB of thermal insulation in roof can be calculated by Equation (22).
When 0  ENB , it indicates that the use of the thermal insulation will produce environ- mental benefits: the thermal insulation is environmentally feasible and environmentally friendly.When 0  ENB , it implies that the use of the thermal insulation will have nega- tive impacts on the environment.

Integrated Economic and Environmental Assessment of Roof Insulation
An integrated dimensionless assessment index ( b ) considering both economic and environmental factors is presented and used to assess the roof insulation comprehensively.The integrated dimensionless assessment index can eliminate the influence of different units of economic benefit and environmental benefit.The thermal insulation with the maximum integrated assessment index is the best candidate insulation design solution for building roofs.The integrated dimensionless assessment index can be determined as follows: where 1 w is the assigned weight of the economic benefit and 2 w is the assigned weight of the environmental benefit, where . ENB is the net present value of environ- mental benefit for roof insulation, Pt/m 2 .ENB is calculated by using Equation (22).max ENB is the maximum net present value of environmental benefit for roof insulation, USD/m 2 .B EN  is the relative value of the environmental benefit for insulation invest- ment.ECB is the net present value of economic benefit for roof insulation.ECB is cal- culated by using Equation (25).max ECB is the maximum net present value of economic benefit for insulation investment.B EC  is the relative value of economic benefits for roof insulation.
The best solution of roof thermal insulation is determined by comparing the value of the dimensionless economic and environmental assessment index.The thermal insulation with the largest value for the dimensionless assessment index is the best solution for building roofs.The optimum roof insulation thickness is determined by maximizing the sum of economic benefits and environmental benefits of roof thermal insulation.When the optimum thickness of roof insulation has been determined, the payback period ( p L ) of roof insulation can be calculated by Equation (27).Payback period is an important economic index in evaluating the economic performance of insulation [37].

Building and Environmental Cost of Thermal Insulation
A low-temperature granary was studied as a case study in this paper, using the optimization design method of roof thermal insulation proposed here.This low-temperature granary is located in Changsha city, in China, with typical hot summer and cool winter climate characteristics.Low-temperature grain storage (below 20 °C) is a popular green ecological grain-storage technique.However, the energy consumption of low-temperature granaries is high.This low-temperature granary is a large warehouse with dimensions of 24 m (width) × 8.3 m (height) × 36 m (length), as shown in Figure 5. Air-conditioning systems are installed in the granary to maintain the 15 °C indoor air temperature in the granary.The energy efficiency ratio of air-conditioning systems concerned is 2.3.The characteristic parameters of roof materials are shown in Table 1.The thermal insulation layer is located between the cement mortar layer and the waterproofing membrane layer.Three types of thermal insulation are considered in this paper: expanded polystyrene (EPS), polyurethane (PU), and mineral wool (MW), as shown in Table 2.A single-skin roof and a double-skin roof are considered in this paper to investigate the effect of different roof structures on economic and environmental performances of roof insulation.A white roof outer surface color (solar radiation reflectivity coefficient  = 0.55) and a grey roof outer surface color (  = 0.25) are considered in this paper to investigate the effect of different roof outer surface colors on the economic and environmental performance of thermal insulation.
Table 2. Characteristic parameters of thermal insulation [15,18].Eco-indicator 99 is one of the most famous environmental assessment methods in the world and has been used to assess the environmental impacts of insulation in buildings [31,32,43].Three environmental damage types and eleven environmental impacts are considered in Eco-indicator 99.Each environmental impact category is translated into a single score, which can be used to assess the impacts on human health, environmental quality, and natural resource utilization quantitatively [49].The categories of impact and damage are expressed in the unit of point (Pt).A score of 1 Pt indicates 103 units of annual damage to the environment for one citizen of Europe.The results of LCA analysis for three types of insulation and electricity consumption of Dylewski and Adamczyk [43] are used as the basic data to assess the environmental performance of roof thermal insulation, as shown in Table 3.The total cooling loads of the roofs throughout the year is simulated by COMSOL and the roof energy consumption cost per square meter is calculated by Equations ( 10)-( 13), as shown in Table 4.

Insulation Type
Table 3.The results of LCA analysis for insulation materials and electricity [33].

Results of Economic Benefits of Roof Insulation of Buildings
Figure 6 shows the results of the life cycle total investment cost of three types of roof thermal insulation.With an increase in thermal insulation thickness, the calculated values of LCT for three types of insulation first decrease and then increase.There is a critical value of insulation thickness to minimize the life cycle total investment cost.The LCT values of EPS, PU, and MW increase as the solar radiation reflectivity coefficient of the roof outer surface decreases.The double-skin ventilation roof increases the LCT of ther- mal insulation in the building's roof compared to that of the single-skin roof.Figure 7 shows the results of life cycle saving of three types of roof thermal insulation.With an increase in insulation layer thickness, the calculated values of LCS for three types of insulation first increase and then decrease.There is a critical value of the insulation thickness to maximize the life cycle saving.The roof heat transfer of the double-skin roof is lower than that of the single-skin roof.Less cooling energy is required for the double-skin roof than for the single-skin roof.Roof thermal insulation would save less cooling energy consumption costs for the double-skin roof than those for the single-skin roof.This suggests that a single-layer roof needs more thermal insulation than a double-layer roof.Therefore, the LCS of thermal insulation of the double-skin ventilation roof decreases compared to that of the single-skin roof.roof with a 0.55 solar radiation reflectivity coefficient, respectively.The maximum LCS values of EPS, PU, and MW are 77.9, 63.34, and 73.52 USD/m 2 for the double-skin roof with a 0.25 solar radiation reflectivity coefficient, respectively.
Roof heat transfer is lower when the solar radiation reflectivity coefficient of the outer surface of the roof is higher.Less cooling energy consumption is required for the roof with a higher outer surface reflectivity coefficient of solar radiation.Roof thermal insulation can save less cooling energy consumption cost due to a building roof having a higher outer surface reflectivity coefficient of solar radiation.Therefore, the maximum economic benefit of EPS, PU, and MW increases decreasing solar radiation reflectivity coefficient of the outer surface of the roof.This implies that the economic need to install a thermal insulation layer in the roof increases decreasing solar radiation reflectivity coefficient of the outer surface of the roof.

Results of Environmental Benefits of Roof Insulation of Buildings
Figure 8 shows the results of the environmental benefits of three types of thermal insulation.With an increase in the thermal insulation thickness, the environmental benefits for the three types of insulation first increase and then decrease.There is a critical value of insulation thickness to maximize the environmental benefits of roof thermal insulation.The double-skin ventilation roof increases the environmental benefits of thermal insulation in a building's roof compared to the single-skin roof.The maximum environmental benefit value of EPS, PU, and MW is 136.53,159.55, and 196.66 Pt/m 2 for the single-skin roof with a 0.55 solar radiation reflectivity coefficient, respectively.The maximum environmental benefit value of EPS, PU, and MW is 166.69,172.80, and 229.67 Pt/m 2 for the single-skin roof with a 0.25 solar radiation reflectivity coefficient, respectively.The maximum environmental benefit of EPS, PU, and MW increases with decreasing solar radiation reflectivity coefficient of the outer surface of the roof.This implies that the environmental need to install a thermal insulation layer in the roof increases with decreasing solar radiation reflectivity coefficient of the outer surface of the roof.
The maximum environmental benefit value of EPS, PU, and MW is 194.70,243.43, and 254.11Pt/m 2 for the double-skin roof with a 0.55 solar radiation reflectivity coefficient, respectively.The maximum environmental benefit value of EPS, PU, and MW is 244.54,264.49, and 291.20 Pt/m 2 for the double-skin roof with a 0.25 solar radiation reflectivity coefficient, respectively.The ranking of the maximum environmental benefit of three types of thermal insulation is MW > EPS > PU.The double-skin roof has greater environmental benefits than those of the single-skin roof.In order to achieve a better environmental impact, the double-skin ventilation roof of a low-temperature granary should be used with a suitable thermal insulation thickness in the Changsha region in China.

Results of the Integrated Assessment of Roof Thermal Insulation
An economic weight coefficient of 1 w = 0.8 and an environmental weight coefficient of 2 w = 0.2 were used as examples in this paper to assess the integrated economic and environmental performances of three types of roof thermal insulation.Among the three types of roof thermal insulation studied, the thermal insulation with the best economic benefit is EPS.The insulation material with the best environmental benefit is MW.The assigned economic and environmental weight coefficients can be determined according to the actual engineering needs in real buildings.When the economic weight coefficient is greater, the assigned economic and environmental weight coefficient values are suitable for the projects that focus on economic benefits.When the environmental weight coefficient is bigger, the assigned economic and environmental weight coefficient values are suitable for the projects that focus on environmental benefits.When the economic and environmental weight coefficients are the same, the assigned economic and environmental weight coefficient values are suitable for the projects that focus on economic and environmental benefits equally.
The optimum insulation thickness is determined by maximizing the sum of economic benefits and environmental benefits due to roof thermal insulation.Figure 9 shows the optimal insulation thickness under the influences of multiple factors (roof structure, roof outer surface color, and insulation type).The optimal insulation thickness of EPS, PU, and MW is 0.148 m, 0.082 m and 0.122 m for the single-skin roof with a 0.55 solar radiation reflectivity coefficient, respectively.The optimal insulation thickness of EPS, PU, and MW is 0.171 m, 0.095 m and 0.142 m for the single-skin roof with a 0.25 solar radiation reflectivity coefficient, respectively.The optimal insulation thickness of EPS, PU, and MW is 0.128 m, 0.068 m and 0.104 m for the double-skin roof with a 0.55 solar radiation reflectivity coefficient respectively.The optimal insulation thickness of EPS, PU, and MW is 0.153 m, 0.081 m and 0.127 m for the double-skin roof with a 0.25 solar radiation reflectivity coefficient, respectively.Figure 10 shows the payback period for the investment of three types of thermal insulation.The payback period of investment for EPS, PU, and MW is 2.01-2.68years, 2.44-3.0years, and 2.25-2.84years, respectively.The economic benefits ( ECB ) of the three types of thermal insulation are summa- rized in Table 5.The environmental benefits ( ENB ) of the three types of roof thermal insulation are summarized in Table 6.All environmental benefits in Table 6 are positive, which indicates that each type of thermal insulation concerned is profitable for environmental reasons.7 presents the analysis results of integrated dimensionless assessment indexes for three types of roof insulation.The larger the value of the integrated assessment index, the greater the integrated economic and environmental benefit.The analysis results of the control variable method show that the differences in the integrated assessment index range from 0.134 to 0.157 when the variable is the solar radiation reflectivity coefficient of the roof outer surface for the low-temperature granary roof in the Changsha region in China.Insulation type has a certain influence on the integrated assessment index.The influence of insulation type should be considered in finding the best candidate insulation design scheme for building roofs.By comparing the integrated dimensionless economic and environmental assessment indexes, it can be seen that the best result is obtained by EPS for the double-skin sloping roof with a grey outer surface color for the low-temperature granary roof in the Changsha region in China.The ranking of the integrated assessment indexes of thermal insulation is EPS > MW > PU.In order to achieve a better economic effect and better environmental impact, the double-skin ventilation roof should include a suitable thermal insulation thickness in the low-temperature granary roof in the Changsha region in China.When the variable is the solar radiation reflectivity coefficient of roof outer surface, the differences in integrated assessment index range from 0.006 to 0.015 for a single-skin roof.The differences in the integrated assessment index range from 0.007 to 0.013 for a double-skin roof in the low-temperature granary in Changsha region in China.The influence of the solar radiation reflectivity coefficient of the roof outer surface should be considered in finding the best candidate insulation design scheme for building roofs.The solar radiation reflectivity coefficients of roof outer surface are determined according to different outer surface colors.The integrated assessment index for the roof with a lower solar radiation reflectivity coefficient is greater than that for the roof with a higher solar radiation reflectivity coefficient.This indicates that the integrated economic and environmental benefit of insulation in the roof with a lower solar radiation reflectivity coefficient is better than that in the roof with a higher solar radiation reflectivity coefficient.
When the roof structure is different, the differences in the integrated assessment index range from 0.014 to 0.038 for the single-skin roof and the double-skin roof in the lowtemperature granary in Changsha region in China, respectively.The influence of roof structure should be considered in finding the best candidate insulation design scheme for building roofs.The integrated assessment index of the double-skin roof is greater than that of the single-skin roof when the solar radiation reflectivity coefficient of roof outer surface is the same.Therefore, the integrated economic and environmental benefit of a double-skin roof is better than that of a single-skin layer.
When compared with the existing studies, it may be found that the current findings are supported by many existing studies.Las-Heras-Casas et al. [8] found that the use of thermal insulation in the envelopes can apparently improve the economic and environmental performances of existing multi-family buildings in the hot and temperate climate zones of Spain.Akan and Akan [9] found that EPS, PU, and RW can reduce energy consumption by 10.1~61.1% and CO2 emissions by 46~69% for buildings in Turkey during the cooling season.Annibaldi et al. [10] found that rock wool can save 10.17 USD/m 2 and reduce CO2 emissions of building walls in Italy by 10.07 kg/m 2 for the whole life cycle.The research results of Las-Heras-Casas et al. [8], Akan and Akan [9], and Annibaldi et al. [10] can confirm our findings that the use of thermal insulation is beneficial to both the economy and the environment of the low-temperature granary roof in Changsha region in China.The economic benefits of EPS, PU, and RW in roofs range from 53.97 to 94.41 USD/m 2 , and the environmental benefits of EPS, PU, and RW in roofs range from 136.53 to 291.20 Pt/m 2 for the low-temperature granary in the Changsha region in China in the whole life cycle.

Conclusions
The design of thermal insulation in a roof is very important to reduce roof energy consumption and decrease the environmental pollution impacts of buildings.An integrated economic and environmental assessment-based optimization design method has been presented in this paper to find the best candidate insulation design scheme for building roofs, including the determination of the roof thermal insulation type and the optimum insulation thickness.The main conclusions are as follows: (1) The integrated economic and environmental assessment-based optimization design method can help designers to find the best design scheme of thermal insulation, maximizing the sum of economic benefit and environmental benefit for building roofs efficiently.
(2) The proposed integrated optimization design method was actually developed based on two general economic and environmental analysis models that take into account different building types in different regions.Therefore, the proposed integrated optimization design method can also be applied to building roofs with different thermal insulation materials in different climatic regions.(3) The validation result shows that the predicted data of zonal-based double-skin ventilation roof heat transfer model agreed well with the measured data, with a maximum relative error of 8.2%.(4) The optimum insulation thicknesses of EPS, MW, and PU are between 0.082 m and 0.171 m for the single-skin roof in the low-temperature granary in the Changsha region in China.A double-skin ventilation roof can reduce the optimum thickness of roof thermal insulation.The best result is obtained by EPS for the double-skin roof with a grey outer surface color for the low-temperature granary roof in the Changsha region in China.The ranking of the integrated assessment indexes of thermal insulation is EPS > MW > PU.

Figure 1 .
Figure 1.Block diagram of optimization design method for roof insulation.

Figure 2 .
Figure 2. Schematic diagram of heat transfer of a double-skin roof.

A
, is the area of the ith control unit of the air gap, m 2 .i dn T , is the temperature of the ith control unit of the lower roof, K. gap dn h  is the convective heat transfer coefficient between the lower roof and the air gap, W/(m 2 •K).gap m is the quality of air flow in the air gap, kg/s.i gap c , is the specific heat capacity of the ith control unit of the air gap, kJ/(kg•K).
of the i-1th control unit of the air gap, kJ/(kg•K).The transient transfer heat flux through the lower roof can be derived by solving Equation (5):

Figure 3 .
Figure 3. Section plan of double-skin ventilation roof for building.

Figure 4 .
Figure 4. Measured and predicted inner surface temperature of roofs.
interior surface temperature of ordinary single-skin roof Predicted interior surface temperature of ordinary single-skin roof Measured interior surface temperature of double-skin ventilation roof Predicted interior surface temperature of double-skin ventilation roof  mNis the loan term of thermal insulation.
where sa EN is the environmental income in the life cycle due to energy-saving, Pt/m 2 .0 EN is the LCA environmental analysis result of roof energy consumption without ther- mal insulation, Pt/year. EN is the LCA environmental analysis result of roof energy consumption with a  thermal insulation thickness, Pt/year.n is the service life of the roof thermal insulation.0 e, Z is the energy consumption of 1 m 2 of roof without insulation, KWh/(m 2 •year).δ e,

Figure 5 .
Figure 5. COMSOL model of the low-temperature granary.

Figure 6 .
Figure 6.Life cycle total investment of roof thermal insulation.

Figure 7 . 2 )L 2 )
Figure 7. Life cycle net present value of roof thermal insulation.The maximum LCS value of EPS, PU, and MW are 83.05,64.31, and 75.11USD/m 2 for the single-skin roof with a 0.55 solar radiation reflectivity coefficient, respectively.The maximum LCS values of EPS, PU, and MW are 94.41, 76, and 86.96 USD/m 2 for the sin- gle-skin roof with a 0.25 solar radiation reflectivity coefficient, respectively.The maximum LCS values of EPS, PU, and MW are 68.85,53.97, and 64.39 USD/m 2 for the double-skin

Figure 8 .
Figure 8. Environmental benefit of roof thermal insulation.
in single-layer roof when = 0.55 ENB of PU in single-layer roof when = 0.55 ENB of MW in single-layer roof when = 0.55 ENB of EPS in single-layer roof when = 0.25 ENB of PU in single-layer roof when = 0.25 ENB of MW in single-layer roof when = 0.25 Thickness of thermal insulation layer (m) Environmental benefit of thermal insulation (Pt/m 2 ) ENB of EPS in double-layer roof when = 0.55 ENB of PU in double-layer roof when = 0.55 ENB of MW in double-layer roof when = 0.55 ENB of EPS in double-layer roof when = 0.25 ENB of PU in double-layer roof when = 0.25 ENB of MW in double-layer roof when = 0.25

Figure 9 .
Figure 9. Optimum roof thermal insulation of buildings.

Figure 10 .
Figure 10.Payback period of roof thermal insulation of buildings.
EC represents the energy-saving cost of roof per square meter due to thermal insula- tion, USD/m 2 .i U represents the unit price of thermal insulation, USD/m 3 .c sa

Table 4 .
The total cooling loads and energy consumption cost.

Table 5 .
Economic benefits of thermal insulation.

Table 6 .
Environmental benefits of roof thermal insulation.

Table 7 .
Integrated assessment index of thermal insulation.