A Three-Dimensional Box-Counting Method to Study the Fractal Characteristics of Urban Areas in Shenyang, Northeast China

: Modern expansion and three-dimensional growth are rapidly altering the morphological features of traditional cities. This morphological phenomenon fully reﬂects the internal organization mode and composition rules of modern cities. This study draws on the research method of three-dimensional fractal, focusing on the situation where there is less research on the fractal form at the block scale, and conducts a fractal research on the three-dimensional form of a city at the meso and micro scales, in order to reveal the fractal characteristics of modern urban density. Based on fractal theory, the urban form of Shenyang, Northeast China, was quantitatively analyzed using the box-counting (Minkowski–Bouligand) method to calculate the two-dimensional (2D) and three-dimensional (3D) box dimensions of urban areas. Next, by analyzing the correlations between morphological indicators and 2D and 3D fractal dimensions, this study proposes cluster features of the correlation between the 3D fractal dimension and ﬂoor-area ratio. Then, this study summarizes the fractal characteristics of Shenyang’s urban form, based on the cluster analysis and spatial features of various urban areas within the city. The analysis results show the fractal dimension of Shenyang’s urban form to have characteristic expected values; fractal dimension clusters reﬂect spatial differences in the forms of different urban areas. The 3D D value of architectural morphology fractal in urban areas of Shenyang is between 2.41 and 2.70. From this, the representative characteristics of Shenyang’s urban form were obtained: ﬁrst, it has the fractal characteristics of morphological hierarchy and system embeddedness; second, under uniﬁed and standardized management, its basic urban form structure displays the fractal characteristics of morphological similarity and system hierarchy; and third, its 3D urban form characteristics include the spatial accumulation of clusters and morphological patches, creating a patchwork of different building heights and densities, with the spatial clustering of density form highly correlated with the fractal dimension. The results of this research will provide reference samples for the morphological identiﬁcation, design control, and design review of modern cities, and enrich the research results of the application of fractal theory to urban morphology at the meso and micro scales. This study also analyzed the correlation between the 3D D values and the urban form measurement indicators of floor-area ratio, building density, standard deviation of build- ing floors, and average number of floors for the sub-research areas. An analysis of the bivariate Pearson Correlation, using IBM SPSS Statistics, showed that the 2D D value is significantly correlated with building density and the standard deviation of building floors at the 0.01 level (two-tailed), and the 3D D value is significantly correlated with floor-area ratio and average number of floors at the 0.01 level (two-tailed). The results indicate that building density is the main correlation indicator of the 2D D value, and the standard deviation of building floors reflects the degree of change in building height. It also reflects changes in the density of buildings of different heights. The 3D D value re- flects the degree of occupation of a city’s 3D space, which is perceived as a change in the density of the 3D vertical form of a city. In this study, the changes in differences in 3D D value of form of each sub-study area were concretized, and the clustering morphological characteristics, based on the classifi- cation of floor area ratio, were proposed. As shown in Figure 5, by referring to the “Space- mate” method proposed by Metaberg Berghaus Pont of Delft University of Technology in the Netherlands, four indicators, namely the floor area ratio (FSI), building coverage rate (ground space index (GSI)), open space ratio (OSR), and average number of floors (L), were combined to establish a graph to evaluate the correlation between 3D D value and urban form. The difference in 3D D value in the vertical axis (FSI) was the most significant, with cluster intervals of 1.5 2.4, 2.4 – 4.5, and 4.5 – 6.5, respectively; the cluster intervals of the 3D D value were 2.47 2.53, 2.53 2.60, and 2.60 – 2.70, respectively. This study holds that the 3D fractal values of the 24 selected sub-study areas were significantly different, and it can be seen that the macro-measurement of the 3D D value of the overall urban form adopted by relevant literature cannot


Introduction
Fractals are used to describe the complexity of patterns, both in terms of the basic order of naturally occurring patterns and artificial phenomena [1]. French American mathematician Mandelbrot coined the term "fractal" in 1975 [2]. Mandelbrot first introduced his fractal theory in 1967, when he calculated the fractal dimension of the coastline of Great Britain [2]. Fractal theory enables the exploration of dynamic and complex systems, such as cities, which generally have intricate morphology and systems, especially in terms of geometric complexity and urban form [3], by modelling their growth processes.
Following Batty's application of fractal theory to urban studies [4][5][6], the term "fractal city" has become standard. His book Fractal Cities introduced fractal models (the diffusion-are applicable to the highly complex urban form, and it therefore only has fractal properties at certain scales. Neighborhood-scale city studies have been shown to be relatively accurate. For example, Wheeler (2003) used street patterns, the size and shape of plots, design features of buildings and sites, and land use combinations to describe communities developed during various historical periods [39]. Song and Knapp developed indicators for dimensions such as street design [40], density, land use mix, commercial activities, and modes of transportation, to quantify the community morphologies of the Portland metropolitan area [26,41,42]. Therefore, in the study of urban form, the spatial scale that can be perceived by the human body, that is, community-neighborhood scale, is usually chosen as the research scope.
Based on the review of fractal theory and its research directions, and explorations of urban form, this study holds that sparse and dense morphological relationships reflect the internal organization method and composition rules of 3D morphology, and shape the overall order of modern cities. However, there are few studies on the fractal characteristics of 3D urban forms at the block scale, the existing studies focus only on the mathematical fractal range. Moreover, there has been limited investigation of concrete urban design in combination with the specific physical environment. Therefore, considering the advantages of urban form research at the community-neighborhood scale, this study advances the fractal quantitative research of urban form from the novel perspective of 3D meso-micro scale [26,43], and explains the fractal characteristics of modern urban density morphology by calculating the 3D box dimension. This will provide a reference sample for the identification of modern urban form, and enrich research on urban form at the meso-micro scale through application of the fractal theory. This study further analyzes the clustering characteristics of urban agglomeration degree form, which can also have a positive impact on the hierarchical control measures of urban form [44].
In summary, this study takes the urban form of Shenyang as its research object (Figure 1), selects a multi-sample area space for box-counting dimension analysis of urban 3D fractals, and attempts to clarify the hierarchical order of urban 3D form, as well as the basic law of fractal form. In this study, the side length of a box of a certain size is determined according to the conventional scale (300 m) of the morphological units formed by the urban road system [45], and it is then combined with the growth law of urban building height to further determine the power law relationship of the 3D box, thereby calculating the urban 3D fractal dimension value. Next, the clustering characteristics of density morphological indicators in different areas are statistically analyzed through differences in fractal dimension value. Finally, combined with the quantitative analysis of the typical specific morphological characteristics of "one river and two banks" in Shenyang, this study proposes a basic understanding of the hierarchical order and fractal characteristics of the urban density form of Shenyang. The findings will provide important theoretical support and control parameter references for the design review and concrete form control of modern urban designs.

Data Sources
The data used in this study are based on the data of building outlines and urban land use of built-up areas in Shenyang in 2018, obtained from Shuijingzhu Downloader. Considering the historical development and structural characteristics of Shenyang's urban areas, and in combination with the city's separation status by natural and anthropogenic boundaries, 24 relatively complete blocks of 1.2 km × 1.2 km were selected. These sample areas can adequately reflect the spatial characteristics of 3D fractals in different historical development stages of Shenyang, e.g., areas with multi-storey buildings, mixed areas with both multi-storey and high-rise buildings, or areas with high-rise buildings. The types of buildings in the sample areas were mainly residential and business offices. In the selection of samples, attempts were made to exclude large parks, rivers and lakes, and other nonurban development and construction areas as far as possible, so that the data results can accurately reflect the block morphological characteristics of modern cities. In addition, the research team conducted on-site supplementary investigations to verify and correct acquired data related to building outline, floor numbers, and height, to verify the morphological data and information for buildings, land use, roads, etc.

Data Sources
The data used in this study are based on the data of building outlines and urban land use of built-up areas in Shenyang in 2018, obtained from Shuijingzhu Downloader. Considering the historical development and structural characteristics of Shenyang's urban areas, and in combination with the city's separation status by natural and anthropogenic boundaries, 24 relatively complete blocks of 1.2 km × 1.2 km were selected. These sample areas can adequately reflect the spatial characteristics of 3D fractals in different historical development stages of Shenyang, e.g., areas with multi-storey buildings, mixed areas with both multi-storey and high-rise buildings, or areas with high-rise buildings. The types of buildings in the sample areas were mainly residential and business offices. In the selection of samples, attempts were made to exclude large parks, rivers and lakes, and other non-urban development and construction areas as far as possible, so that the data results can accurately reflect the block morphological characteristics of modern cities. In addition, the research team conducted on-site supplementary investigations to verify and correct acquired data related to building outline, floor numbers, and height, to verify the morphological data and information for buildings, land use, roads, etc.

Research Method
The current study used the 3D box-counting method to study the 2D and 3D fractal characteristics of modern urban matrix morphology. The box-counting dimension, proposed by Gangepain in 1986 [45], is one of the most widely used dimensions. The primary reason for its widespread application is that its mathematical calculations and empirical estimations are relatively straightforward [13]. The box-counting and radial analysis methods are commonly used for calculating the fractal dimension of an urban form [46,47].
In 2D box-counting, a two-dimensional fractal pattern is covered with a square grid of side length to obtain the number of non-empty squares or boxes. The side length is gradually increased and a series of values is obtained. Two-dimensional box-counting is expressed by the following equation: where is the box-counting dimension of the object of research.
In the 3D box-counting method, a regular cube grid is used to cover the space or building. First, on the two-dimensional plane XOY, grid squares with different side lengths are used to cover the urban building space, and the non-empty grid squares are counted. Then, the building elevation and height are determined by the number of non-empty grid squares on the plane XOY that have occupied cubes on the Z-axis. The sum of the cubes on non-empty grid squares is denoted as N.
The number of non-empty grid squares on plane XOY corresponding to occupied cubes on the Z-axis can be calculated using the following equation: where N i,j is the number of cubes occupied by the urban building on the Z-axis corresponding to the j-th non-empty grid square when covered by a grid of squares with side length r i ; r i denotes the side length of the grid squares; max h j and min h j are the maximum and minimum heights of urban buildings, respectively, corresponding to the j-th non-empty grid square; and INT is the rounding down operation. The total number of cubes with side length r i required to cover the urban building, N i , is [5,48]: The 3D box-counting dimension of the urban building is: where D f is the 3D box-counting dimension of the object of research [6,14,31].

Object of Research
In this study, considering the natural boundaries, urban road separation, form integrity of the areas, etc., the study area was divided into 24 area units of 1.2 km × 1.2 km (labelled A-X) as sub-study areas for performing dimension calculations and analogy research, respectively (Table 1, Figures 2-4).
The 24 sample areas selected in this study fully reflect the representative characteristics of the 3D fractal dimension values of city blocks in modern Shenyang. Furthermore, in order to further develop the concrete perception of the 3D fractal value of block form for the construction land index, this study further selected the space on both sides of Hunhe River in Shenyang (one river and two banks) as the research area of the visual form index. This area includes sample areas A, B, C, D, L, and O. By analyzing the clustering relationship between the main land use indicators and the spatial aggregation characteristics, this study explored the general law of modern urban form and guides the planning and design control. It should be pointed out that the study area on both sides of the Hunhe River includes the different morphological characteristics of the renewal and development of the old city (to the north of the river) and the construction of the new city (to the south of the river; Figure 2), and can provide fully representative comparison results of the dynamic evolution of modern urban form in Shenyang (Figures 3 and 4).
In this study, the range selection of 3D box scale was based on the judgment of human experience, and the selected areas were based on the grid scale of urban trunk roads and neighborhoods. First, the side length of the 2D boxes of the 3D morphological patches were determined, along with the box height power law relationship according to the change in the urban building height. In the analysis, the average height was calculated from the building height data at different grid sizes. Selecting the average value more accurately reflected the actual space occupied by buildings of different heights, and it minimized the statistical error arising from a sudden change in building height (Table 2).
The 24 sample areas selected in this study fully reflect the representative characteristics of the 3D fractal dimension values of city blocks in modern Shenyang. Furthermore, in order to further develop the concrete perception of the 3D fractal value of block form for the construction land index, this study further selected the space on both sides of Hunhe River in Shenyang (one river and two banks) as the research area of the visual form index. This area includes sample areas A, B, C, D, L, and O. By analyzing the clustering relationship between the main land use indicators and the spatial aggregation characteristics, this study explored the general law of modern urban form and guides the planning and design control. It should be pointed out that the study area on both sides of the Hunhe River includes the different morphological characteristics of the renewal and development of the old city (to the north of the river) and the construction of the new city (to the south of the river; Figure 2), and can provide fully representative comparison results of the dynamic evolution of modern urban form in Shenyang (Figures 3 and 4).
In this study, the range selection of 3D box scale was based on the judgment of human experience, and the selected areas were based on the grid scale of urban trunk roads and neighborhoods. First, the side length of the 2D boxes of the 3D morphological patches were determined, along with the box height power law relationship according to the change in the urban building height. In the analysis, the average height was calculated from the building height data at different grid sizes. Selecting the average value more accurately reflected the actual space occupied by buildings of different heights, and it minimized the statistical error arising from a sudden change in building height (Table 2).
The 24 sample areas selected in this study fully reflect the representative characteristics of the 3D fractal dimension values of city blocks in modern Shenyang. Furthermore, in order to further develop the concrete perception of the 3D fractal value of block form for the construction land index, this study further selected the space on both sides of Hunhe River in Shenyang (one river and two banks) as the research area of the visual form index. This area includes sample areas A, B, C, D, L, and O. By analyzing the clustering relationship between the main land use indicators and the spatial aggregation characteristics, this study explored the general law of modern urban form and guides the planning and design control. It should be pointed out that the study area on both sides of the Hunhe River includes the different morphological characteristics of the renewal and development of the old city (to the north of the river) and the construction of the new city (to the south of the river; Figure 2), and can provide fully representative comparison results of the dynamic evolution of modern urban form in Shenyang (Figures 3 and 4).
In this study, the range selection of 3D box scale was based on the judgment of human experience, and the selected areas were based on the grid scale of urban trunk roads and neighborhoods. First, the side length of the 2D boxes of the 3D morphological patches were determined, along with the box height power law relationship according to the change in the urban building height. In the analysis, the average height was calculated from the building height data at different grid sizes. Selecting the average value more accurately reflected the actual space occupied by buildings of different heights, and it minimized the statistical error arising from a sudden change in building height ( Table 2).
The 24 sample areas selected in this study fully reflect the representative characteristics of the 3D fractal dimension values of city blocks in modern Shenyang. Furthermore, in order to further develop the concrete perception of the 3D fractal value of block form for the construction land index, this study further selected the space on both sides of Hunhe River in Shenyang (one river and two banks) as the research area of the visual form index. This area includes sample areas A, B, C, D, L, and O. By analyzing the clustering relationship between the main land use indicators and the spatial aggregation characteristics, this study explored the general law of modern urban form and guides the planning and design control. It should be pointed out that the study area on both sides of the Hunhe River includes the different morphological characteristics of the renewal and development of the old city (to the north of the river) and the construction of the new city (to the south of the river; Figure 2), and can provide fully representative comparison results of the dynamic evolution of modern urban form in Shenyang (Figures 3 and 4).
In this study, the range selection of 3D box scale was based on the judgment of human experience, and the selected areas were based on the grid scale of urban trunk roads and neighborhoods. First, the side length of the 2D boxes of the 3D morphological patches were determined, along with the box height power law relationship according to the change in the urban building height. In the analysis, the average height was calculated from the building height data at different grid sizes. Selecting the average value more accurately reflected the actual space occupied by buildings of different heights, and it minimized the statistical error arising from a sudden change in building height ( Table 2).
The 24 sample areas selected in this study fully reflect the representative characteristics of the 3D fractal dimension values of city blocks in modern Shenyang. Furthermore, in order to further develop the concrete perception of the 3D fractal value of block form for the construction land index, this study further selected the space on both sides of Hunhe River in Shenyang (one river and two banks) as the research area of the visual form index. This area includes sample areas A, B, C, D, L, and O. By analyzing the clustering relationship between the main land use indicators and the spatial aggregation characteristics, this study explored the general law of modern urban form and guides the planning and design control. It should be pointed out that the study area on both sides of the Hunhe River includes the different morphological characteristics of the renewal and development of the old city (to the north of the river) and the construction of the new city (to the south of the river; Figure 2), and can provide fully representative comparison results of the dynamic evolution of modern urban form in Shenyang (Figures 3 and 4).
In this study, the range selection of 3D box scale was based on the judgment of human experience, and the selected areas were based on the grid scale of urban trunk roads and neighborhoods. First, the side length of the 2D boxes of the 3D morphological patches were determined, along with the box height power law relationship according to the change in the urban building height. In the analysis, the average height was calculated from the building height data at different grid sizes. Selecting the average value more accurately reflected the actual space occupied by buildings of different heights, and it minimized the statistical error arising from a sudden change in building height ( Table 2).
The 24 sample areas selected in this study fully reflect the representative characteristics of the 3D fractal dimension values of city blocks in modern Shenyang. Furthermore, in order to further develop the concrete perception of the 3D fractal value of block form for the construction land index, this study further selected the space on both sides of Hunhe River in Shenyang (one river and two banks) as the research area of the visual form index. This area includes sample areas A, B, C, D, L, and O. By analyzing the clustering relationship between the main land use indicators and the spatial aggregation characteristics, this study explored the general law of modern urban form and guides the planning and design control. It should be pointed out that the study area on both sides of the Hunhe River includes the different morphological characteristics of the renewal and development of the old city (to the north of the river) and the construction of the new city (to the south of the river; Figure 2), and can provide fully representative comparison results of the dynamic evolution of modern urban form in Shenyang (Figures 3 and 4).
In this study, the range selection of 3D box scale was based on the judgment of human experience, and the selected areas were based on the grid scale of urban trunk roads and neighborhoods. First, the side length of the 2D boxes of the 3D morphological patches were determined, along with the box height power law relationship according to the change in the urban building height. In the analysis, the average height was calculated from the building height data at different grid sizes. Selecting the average value more accurately reflected the actual space occupied by buildings of different heights, and it minimized the statistical error arising from a sudden change in building height ( Table 2).
The 24 sample areas selected in this study fully reflect the representative characteristics of the 3D fractal dimension values of city blocks in modern Shenyang. Furthermore, in order to further develop the concrete perception of the 3D fractal value of block form for the construction land index, this study further selected the space on both sides of Hunhe River in Shenyang (one river and two banks) as the research area of the visual form index. This area includes sample areas A, B, C, D, L, and O. By analyzing the clustering relationship between the main land use indicators and the spatial aggregation characteristics, this study explored the general law of modern urban form and guides the planning and design control. It should be pointed out that the study area on both sides of the Hunhe River includes the different morphological characteristics of the renewal and development of the old city (to the north of the river) and the construction of the new city (to the south of the river; Figure 2), and can provide fully representative comparison results of the dynamic evolution of modern urban form in Shenyang (Figures 3 and 4).
In this study, the range selection of 3D box scale was based on the judgment of human experience, and the selected areas were based on the grid scale of urban trunk roads and neighborhoods. First, the side length of the 2D boxes of the 3D morphological patches were determined, along with the box height power law relationship according to the change in the urban building height. In the analysis, the average height was calculated from the building height data at different grid sizes. Selecting the average value more accurately reflected the actual space occupied by buildings of different heights, and it minimized the statistical error arising from a sudden change in building height (Table 2).
The 24 sample areas selected in this study fully reflect the representative characteristics of the 3D fractal dimension values of city blocks in modern Shenyang. Furthermore, in order to further develop the concrete perception of the 3D fractal value of block form for the construction land index, this study further selected the space on both sides of Hunhe River in Shenyang (one river and two banks) as the research area of the visual form index. This area includes sample areas A, B, C, D, L, and O. By analyzing the clustering relationship between the main land use indicators and the spatial aggregation characteristics, this study explored the general law of modern urban form and guides the planning and design control. It should be pointed out that the study area on both sides of the Hunhe River includes the different morphological characteristics of the renewal and development of the old city (to the north of the river) and the construction of the new city (to the south of the river; Figure 2), and can provide fully representative comparison results of the dynamic evolution of modern urban form in Shenyang (Figures 3 and 4).
In this study, the range selection of 3D box scale was based on the judgment of human experience, and the selected areas were based on the grid scale of urban trunk roads and neighborhoods. First, the side length of the 2D boxes of the 3D morphological patches were determined, along with the box height power law relationship according to the change in the urban building height. In the analysis, the average height was calculated from the building height data at different grid sizes. Selecting the average value more accurately reflected the actual space occupied by buildings of different heights, and it minimized the statistical error arising from a sudden change in building height (Table 2).
The 24 sample areas selected in this study fully reflect the representative characteristics of the 3D fractal dimension values of city blocks in modern Shenyang. Furthermore, in order to further develop the concrete perception of the 3D fractal value of block form for the construction land index, this study further selected the space on both sides of Hunhe River in Shenyang (one river and two banks) as the research area of the visual form index. This area includes sample areas A, B, C, D, L, and O. By analyzing the clustering relationship between the main land use indicators and the spatial aggregation characteristics, this study explored the general law of modern urban form and guides the planning and design control. It should be pointed out that the study area on both sides of the Hunhe River includes the different morphological characteristics of the renewal and development of the old city (to the north of the river) and the construction of the new city (to the south of the river; Figure 2), and can provide fully representative comparison results of the dynamic evolution of modern urban form in Shenyang (Figures 3 and 4).
In this study, the range selection of 3D box scale was based on the judgment of human experience, and the selected areas were based on the grid scale of urban trunk roads and neighborhoods. First, the side length of the 2D boxes of the 3D morphological patches were determined, along with the box height power law relationship according to the change in the urban building height. In the analysis, the average height was calculated from the building height data at different grid sizes. Selecting the average value more accurately reflected the actual space occupied by buildings of different heights, and it minimized the statistical error arising from a sudden change in building height (Table 2).
The 24 sample areas selected in this study fully reflect the representative characteristics of the 3D fractal dimension values of city blocks in modern Shenyang. Furthermore, in order to further develop the concrete perception of the 3D fractal value of block form for the construction land index, this study further selected the space on both sides of Hunhe River in Shenyang (one river and two banks) as the research area of the visual form index. This area includes sample areas A, B, C, D, L, and O. By analyzing the clustering relationship between the main land use indicators and the spatial aggregation characteristics, this study explored the general law of modern urban form and guides the planning and design control. It should be pointed out that the study area on both sides of the Hunhe River includes the different morphological characteristics of the renewal and development of the old city (to the north of the river) and the construction of the new city (to the south of the river; Figure 2), and can provide fully representative comparison results of the dynamic evolution of modern urban form in Shenyang (Figures 3 and 4).
In this study, the range selection of 3D box scale was based on the judgment of human experience, and the selected areas were based on the grid scale of urban trunk roads and neighborhoods. First, the side length of the 2D boxes of the 3D morphological patches were determined, along with the box height power law relationship according to the change in the urban building height. In the analysis, the average height was calculated from the building height data at different grid sizes. Selecting the average value more accurately reflected the actual space occupied by buildings of different heights, and it minimized the statistical error arising from a sudden change in building height (Table 2).
The 24 sample areas selected in this study fully reflect the representative characteristics of the 3D fractal dimension values of city blocks in modern Shenyang. Furthermore, in order to further develop the concrete perception of the 3D fractal value of block form for the construction land index, this study further selected the space on both sides of Hunhe River in Shenyang (one river and two banks) as the research area of the visual form index. This area includes sample areas A, B, C, D, L, and O. By analyzing the clustering relationship between the main land use indicators and the spatial aggregation characteristics, this study explored the general law of modern urban form and guides the planning and design control. It should be pointed out that the study area on both sides of the Hunhe River includes the different morphological characteristics of the renewal and development of the old city (to the north of the river) and the construction of the new city (to the south of the river; Figure 2), and can provide fully representative comparison results of the dynamic evolution of modern urban form in Shenyang (Figures 3 and 4).
In this study, the range selection of 3D box scale was based on the judgment of human experience, and the selected areas were based on the grid scale of urban trunk roads and neighborhoods. First, the side length of the 2D boxes of the 3D morphological patches were determined, along with the box height power law relationship according to the change in the urban building height. In the analysis, the average height was calculated from the building height data at different grid sizes. Selecting the average value more accurately reflected the actual space occupied by buildings of different heights, and it minimized the statistical error arising from a sudden change in building height (Table 2).
The 24 sample areas selected in this study fully reflect the representative characteristics of the 3D fractal dimension values of city blocks in modern Shenyang. Furthermore, in order to further develop the concrete perception of the 3D fractal value of block form for the construction land index, this study further selected the space on both sides of Hunhe River in Shenyang (one river and two banks) as the research area of the visual form index. This area includes sample areas A, B, C, D, L, and O. By analyzing the clustering relationship between the main land use indicators and the spatial aggregation characteristics, this study explored the general law of modern urban form and guides the planning and design control. It should be pointed out that the study area on both sides of the Hunhe River includes the different morphological characteristics of the renewal and development of the old city (to the north of the river) and the construction of the new city (to the south of the river; Figure 2), and can provide fully representative comparison results of the dynamic evolution of modern urban form in Shenyang (Figures 3 and 4).
In this study, the range selection of 3D box scale was based on the judgment of human experience, and the selected areas were based on the grid scale of urban trunk roads and neighborhoods. First, the side length of the 2D boxes of the 3D morphological patches were determined, along with the box height power law relationship according to the change in the urban building height. In the analysis, the average height was calculated from the building height data at different grid sizes. Selecting the average value more accurately reflected the actual space occupied by buildings of different heights, and it minimized the statistical error arising from a sudden change in building height (Table 2).
The 24 sample areas selected in this study fully reflect the representative characteristics of the 3D fractal dimension values of city blocks in modern Shenyang. Furthermore, in order to further develop the concrete perception of the 3D fractal value of block form for the construction land index, this study further selected the space on both sides of Hunhe River in Shenyang (one river and two banks) as the research area of the visual form index. This area includes sample areas A, B, C, D, L, and O. By analyzing the clustering relationship between the main land use indicators and the spatial aggregation characteristics, this study explored the general law of modern urban form and guides the planning and design control. It should be pointed out that the study area on both sides of the Hunhe River includes the different morphological characteristics of the renewal and development of the old city (to the north of the river) and the construction of the new city (to the south of the river; Figure 2), and can provide fully representative comparison results of the dynamic evolution of modern urban form in Shenyang (Figures 3 and 4).
In this study, the range selection of 3D box scale was based on the judgment of human experience, and the selected areas were based on the grid scale of urban trunk roads and neighborhoods. First, the side length of the 2D boxes of the 3D morphological patches were determined, along with the box height power law relationship according to the change in the urban building height. In the analysis, the average height was calculated from the building height data at different grid sizes. Selecting the average value more accurately reflected the actual space occupied by buildings of different heights, and it minimized the statistical error arising from a sudden change in building height (Table 2).
The 24 sample areas selected in this study fully reflect the representative characteristics of the 3D fractal dimension values of city blocks in modern Shenyang. Furthermore, in order to further develop the concrete perception of the 3D fractal value of block form for the construction land index, this study further selected the space on both sides of Hunhe River in Shenyang (one river and two banks) as the research area of the visual form index. This area includes sample areas A, B, C, D, L, and O. By analyzing the clustering relationship between the main land use indicators and the spatial aggregation characteristics, this study explored the general law of modern urban form and guides the planning and design control. It should be pointed out that the study area on both sides of the Hunhe River includes the different morphological characteristics of the renewal and development of the old city (to the north of the river) and the construction of the new city (to the south of the river; Figure 2), and can provide fully representative comparison results of the dynamic evolution of modern urban form in Shenyang (Figures 3 and 4).
In this study, the range selection of 3D box scale was based on the judgment of human experience, and the selected areas were based on the grid scale of urban trunk roads and neighborhoods. First, the side length of the 2D boxes of the 3D morphological patches were determined, along with the box height power law relationship according to the change in the urban building height. In the analysis, the average height was calculated from the building height data at different grid sizes. Selecting the average value more accurately reflected the actual space occupied by buildings of different heights, and it minimized the statistical error arising from a sudden change in building height (Table 2).
The 24 sample areas selected in this study fully reflect the representative characteristics of the 3D fractal dimension values of city blocks in modern Shenyang. Furthermore, in order to further develop the concrete perception of the 3D fractal value of block form for the construction land index, this study further selected the space on both sides of Hunhe River in Shenyang (one river and two banks) as the research area of the visual form index. This area includes sample areas A, B, C, D, L, and O. By analyzing the clustering relationship between the main land use indicators and the spatial aggregation characteristics, this study explored the general law of modern urban form and guides the planning and design control. It should be pointed out that the study area on both sides of the Hunhe River includes the different morphological characteristics of the renewal and development of the old city (to the north of the river) and the construction of the new city (to the south of the river; Figure 2), and can provide fully representative comparison results of the dynamic evolution of modern urban form in Shenyang (Figures 3 and 4).
In this study, the range selection of 3D box scale was based on the judgment of human experience, and the selected areas were based on the grid scale of urban trunk roads and neighborhoods. First, the side length of the 2D boxes of the 3D morphological patches were determined, along with the box height power law relationship according to the change in the urban building height. In the analysis, the average height was calculated from the building height data at different grid sizes. Selecting the average value more accurately reflected the actual space occupied by buildings of different heights, and it minimized the statistical error arising from a sudden change in building height (Table 2).
The 24 sample areas selected in this study fully reflect the representative characteristics of the 3D fractal dimension values of city blocks in modern Shenyang. Furthermore, in order to further develop the concrete perception of the 3D fractal value of block form for the construction land index, this study further selected the space on both sides of Hunhe River in Shenyang (one river and two banks) as the research area of the visual form index. This area includes sample areas A, B, C, D, L, and O. By analyzing the clustering relationship between the main land use indicators and the spatial aggregation characteristics, this study explored the general law of modern urban form and guides the planning and design control. It should be pointed out that the study area on both sides of the Hunhe River includes the different morphological characteristics of the renewal and development of the old city (to the north of the river) and the construction of the new city (to the south of the river; Figure 2), and can provide fully representative comparison results of the dynamic evolution of modern urban form in Shenyang (Figures 3 and 4).
In this study, the range selection of 3D box scale was based on the judgment of human experience, and the selected areas were based on the grid scale of urban trunk roads and neighborhoods. First, the side length of the 2D boxes of the 3D morphological patches were determined, along with the box height power law relationship according to the change in the urban building height. In the analysis, the average height was calculated from the building height data at different grid sizes. Selecting the average value more accurately reflected the actual space occupied by buildings of different heights, and it minimized the statistical error arising from a sudden change in building height (Table 2).
The 24 sample areas selected in this study fully reflect the representative characteristics of the 3D fractal dimension values of city blocks in modern Shenyang. Furthermore, in order to further develop the concrete perception of the 3D fractal value of block form for the construction land index, this study further selected the space on both sides of Hunhe River in Shenyang (one river and two banks) as the research area of the visual form index. This area includes sample areas A, B, C, D, L, and O. By analyzing the clustering relationship between the main land use indicators and the spatial aggregation characteristics, this study explored the general law of modern urban form and guides the planning and design control. It should be pointed out that the study area on both sides of the Hunhe River includes the different morphological characteristics of the renewal and development of the old city (to the north of the river) and the construction of the new city (to the south of the river; Figure 2), and can provide fully representative comparison results of the dynamic evolution of modern urban form in Shenyang (Figures 3 and 4).
In this study, the range selection of 3D box scale was based on the judgment of human experience, and the selected areas were based on the grid scale of urban trunk roads and neighborhoods. First, the side length of the 2D boxes of the 3D morphological patches were determined, along with the box height power law relationship according to the change in the urban building height. In the analysis, the average height was calculated from the building height data at different grid sizes. Selecting the average value more accurately reflected the actual space occupied by buildings of different heights, and it minimized the statistical error arising from a sudden change in building height (Table 2).
The 24 sample areas selected in this study fully reflect the representative characteristics of the 3D fractal dimension values of city blocks in modern Shenyang. Furthermore, in order to further develop the concrete perception of the 3D fractal value of block form for the construction land index, this study further selected the space on both sides of Hunhe River in Shenyang (one river and two banks) as the research area of the visual form index. This area includes sample areas A, B, C, D, L, and O. By analyzing the clustering relationship between the main land use indicators and the spatial aggregation characteristics, this study explored the general law of modern urban form and guides the planning and design control. It should be pointed out that the study area on both sides of the Hunhe River includes the different morphological characteristics of the renewal and development of the old city (to the north of the river) and the construction of the new city (to the south of the river; Figure 2), and can provide fully representative comparison results of the dynamic evolution of modern urban form in Shenyang (Figures 3 and 4).
In this study, the range selection of 3D box scale was based on the judgment of human experience, and the selected areas were based on the grid scale of urban trunk roads and neighborhoods. First, the side length of the 2D boxes of the 3D morphological patches were determined, along with the box height power law relationship according to the change in the urban building height. In the analysis, the average height was calculated from the building height data at different grid sizes. Selecting the average value more accurately reflected the actual space occupied by buildings of different heights, and it minimized the statistical error arising from a sudden change in building height (Table 2).
The 24 sample areas selected in this study fully reflect the representative characteristics of the 3D fractal dimension values of city blocks in modern Shenyang. Furthermore, in order to further develop the concrete perception of the 3D fractal value of block form for the construction land index, this study further selected the space on both sides of Hunhe River in Shenyang (one river and two banks) as the research area of the visual form index. This area includes sample areas A, B, C, D, L, and O. By analyzing the clustering relationship between the main land use indicators and the spatial aggregation characteristics, this study explored the general law of modern urban form and guides the planning and design control. It should be pointed out that the study area on both sides of the Hunhe River includes the different morphological characteristics of the renewal and development of the old city (to the north of the river) and the construction of the new city (to the south of the river; Figure 2), and can provide fully representative comparison results of the dynamic evolution of modern urban form in Shenyang (Figures 3 and 4).
In this study, the range selection of 3D box scale was based on the judgment of human experience, and the selected areas were based on the grid scale of urban trunk roads and neighborhoods. First, the side length of the 2D boxes of the 3D morphological patches were determined, along with the box height power law relationship according to the change in the urban building height. In the analysis, the average height was calculated from the building height data at different grid sizes. Selecting the average value more accurately reflected the actual space occupied by buildings of different heights, and it minimized the statistical error arising from a sudden change in building height (Table 2).
The 24 sample areas selected in this study fully reflect the representative characteristics of the 3D fractal dimension values of city blocks in modern Shenyang. Furthermore, in order to further develop the concrete perception of the 3D fractal value of block form for the construction land index, this study further selected the space on both sides of Hunhe River in Shenyang (one river and two banks) as the research area of the visual form index. This area includes sample areas A, B, C, D, L, and O. By analyzing the clustering relationship between the main land use indicators and the spatial aggregation characteristics, this study explored the general law of modern urban form and guides the planning and design control. It should be pointed out that the study area on both sides of the Hunhe River includes the different morphological characteristics of the renewal and development of the old city (to the north of the river) and the construction of the new city (to the south of the river; Figure 2), and can provide fully representative comparison results of the dynamic evolution of modern urban form in Shenyang (Figures 3 and 4).
In this study, the range selection of 3D box scale was based on the judgment of human experience, and the selected areas were based on the grid scale of urban trunk roads and neighborhoods. First, the side length of the 2D boxes of the 3D morphological patches were determined, along with the box height power law relationship according to the change in the urban building height. In the analysis, the average height was calculated from the building height data at different grid sizes. Selecting the average value more accurately reflected the actual space occupied by buildings of different heights, and it minimized the statistical error arising from a sudden change in building height (Table 2).
The 24 sample areas selected in this study fully reflect the representative characteristics of the 3D fractal dimension values of city blocks in modern Shenyang. Furthermore, in order to further develop the concrete perception of the 3D fractal value of block form for the construction land index, this study further selected the space on both sides of Hunhe River in Shenyang (one river and two banks) as the research area of the visual form index. This area includes sample areas A, B, C, D, L, and O. By analyzing the clustering relationship between the main land use indicators and the spatial aggregation characteristics, this study explored the general law of modern urban form and guides the planning and design control. It should be pointed out that the study area on both sides of the Hunhe River includes the different morphological characteristics of the renewal and development of the old city (to the north of the river) and the construction of the new city (to the south of the river; Figure 2), and can provide fully representative comparison results of the dynamic evolution of modern urban form in Shenyang (Figures 3 and 4).
In this study, the range selection of 3D box scale was based on the judgment of human experience, and the selected areas were based on the grid scale of urban trunk roads and neighborhoods. First, the side length of the 2D boxes of the 3D morphological patches were determined, along with the box height power law relationship according to the change in the urban building height. In the analysis, the average height was calculated from the building height data at different grid sizes. Selecting the average value more accurately reflected the actual space occupied by buildings of different heights, and it minimized the statistical error arising from a sudden change in building height (Table 2).
The 24 sample areas selected in this study fully reflect the representative characteristics of the 3D fractal dimension values of city blocks in modern Shenyang. Furthermore, in order to further develop the concrete perception of the 3D fractal value of block form for the construction land index, this study further selected the space on both sides of Hunhe River in Shenyang (one river and two banks) as the research area of the visual form index. This area includes sample areas A, B, C, D, L, and O. By analyzing the clustering relationship between the main land use indicators and the spatial aggregation characteristics, this study explored the general law of modern urban form and guides the planning and design control. It should be pointed out that the study area on both sides of the Hunhe River includes the different morphological characteristics of the renewal and development of the old city (to the north of the river) and the construction of the new city (to the south of the river; Figure 2), and can provide fully representative comparison results of the dynamic evolution of modern urban form in Shenyang (Figures 3 and 4).
In this study, the range selection of 3D box scale was based on the judgment of human experience, and the selected areas were based on the grid scale of urban trunk roads and neighborhoods. First, the side length of the 2D boxes of the 3D morphological patches were determined, along with the box height power law relationship according to the change in the urban building height. In the analysis, the average height was calculated from the building height data at different grid sizes. Selecting the average value more accurately reflected the actual space occupied by buildings of different heights, and it minimized the statistical error arising from a sudden change in building height (Table 2).
The 24 sample areas selected in this study fully reflect the representative characteristics of the 3D fractal dimension values of city blocks in modern Shenyang. Furthermore, in order to further develop the concrete perception of the 3D fractal value of block form for the construction land index, this study further selected the space on both sides of Hunhe River in Shenyang (one river and two banks) as the research area of the visual form index. This area includes sample areas A, B, C, D, L, and O. By analyzing the clustering relationship between the main land use indicators and the spatial aggregation characteristics, this study explored the general law of modern urban form and guides the planning and design control. It should be pointed out that the study area on both sides of the Hunhe River includes the different morphological characteristics of the renewal and development of the old city (to the north of the river) and the construction of the new city (to the south of the river; Figure 2), and can provide fully representative comparison results of the dynamic evolution of modern urban form in Shenyang (Figures 3 and 4).
In this study, the range selection of 3D box scale was based on the judgment of human experience, and the selected areas were based on the grid scale of urban trunk roads and neighborhoods. First, the side length of the 2D boxes of the 3D morphological patches were determined, along with the box height power law relationship according to the change in the urban building height. In the analysis, the average height was calculated from the building height data at different grid sizes. Selecting the average value more accurately reflected the actual space occupied by buildings of different heights, and it minimized the statistical error arising from a sudden change in building height (Table 2).
The 24 sample areas selected in this study fully reflect the representative characteristics of the 3D fractal dimension values of city blocks in modern Shenyang. Furthermore, in order to further develop the concrete perception of the 3D fractal value of block form for the construction land index, this study further selected the space on both sides of Hunhe River in Shenyang (one river and two banks) as the research area of the visual form index. This area includes sample areas A, B, C, D, L, and O. By analyzing the clustering relationship between the main land use indicators and the spatial aggregation characteristics, this study explored the general law of modern urban form and guides the planning and design control. It should be pointed out that the study area on both sides of the Hunhe River includes the different morphological characteristics of the renewal and development of the old city (to the north of the river) and the construction of the new city (to the south of the river; Figure 2), and can provide fully representative comparison results of the dynamic evolution of modern urban form in Shenyang (Figures 3 and 4).
In this study, the range selection of 3D box scale was based on the judgment of human experience, and the selected areas were based on the grid scale of urban trunk roads and neighborhoods. First, the side length of the 2D boxes of the 3D morphological patches were determined, along with the box height power law relationship according to the change in the urban building height. In the analysis, the average height was calculated from the building height data at different grid sizes. Selecting the average value more accurately reflected the actual space occupied by buildings of different heights, and it minimized the statistical error arising from a sudden change in building height (Table 2).

Fractal Dimension Results
The fractal dimension results for the 24 sub-research areas are presented below (Tables 3 and 4).  The 24 sample areas selected in this study fully reflect the representative characteristics of the 3D fractal dimension values of city blocks in modern Shenyang. Furthermore, in order to further develop the concrete perception of the 3D fractal value of block form for the construction land index, this study further selected the space on both sides of Hunhe River in Shenyang (one river and two banks) as the research area of the visual form index. This area includes sample areas A, B, C, D, L, and O. By analyzing the clustering relationship between the main land use indicators and the spatial aggregation characteristics, this study explored the general law of modern urban form and guides the planning and design control. It should be pointed out that the study area on both sides of the Hunhe River includes the different morphological characteristics of the renewal and development of the old city (to the north of the river) and the construction of the new city (to the south of the river; Figure 2), and can provide fully representative comparison results of the dynamic evolution of modern urban form in Shenyang (Figures 3 and 4).
In this study, the range selection of 3D box scale was based on the judgment of human experience, and the selected areas were based on the grid scale of urban trunk roads and neighborhoods. First, the side length of the 2D boxes of the 3D morphological patches were determined, along with the box height power law relationship according to the change in the urban building height. In the analysis, the average height was calculated from the building height data at different grid sizes. Selecting the average value more accurately reflected the actual space occupied by buildings of different heights, and it minimized the statistical error arising from a sudden change in building height ( Table 2).

Fractal Dimension Results
The fractal dimension results for the 24 sub-research areas are presented below (Tables 3 and 4).

Analysis of Fractal Results
First, the study found the 2D D values to correspond to the area of land use. The simulation Batty et al. [14] suggested D = 1.71 to be the expected value of the 2D urban fractal dimension. The 24 sub-research areas selected for this study were all blocks filled with buildings, so their 2D D values were relatively high, in the range of 1.78-1.97. Second, the 3D fractal dimension values reflect vertical morphological laws. Relevant studies regarding the 3D growth of modern cities have shown that a high D value is positively correlated with an unpleasant or merely satisfactory environment, and negatively correlated with an environment regarded as pleasant. The 3D D values of the sub-research areas in this study ranged between 2.41 and 2.70.
Upon comparing the results with those of relevant studies, it was noted that Chen and Liu, in their study on the fractal dimensions of various types of urban land use, found that the buildings for each land use type were lower than the overall fractal dimension of buildings, but the difference was only minor [49]. An analysis by Li and Zhang found that the fractal dimensions for the city of Zhengzhou in Henan Province were too high overall [31], with 2D fractal dimensions in the range of 1.9-2.0 and 3D fractal dimensions in the range of 2.9-3.0. The box dimensions obtained in Li and Zhang's study were generally quite high. A study by Qin et al. found fractal dimensions of entire 3D scale-free areas, and of buildings with various functions, to be between 2.0 and 2.5 [23]; hence, they questioned whether there would be predetermined values for 3D fractal dimensions. The 3D D value results of 2.41-2.70 in this study reflect the relative appropriateness of the fractal relationship of the architectural form of Shenyang.
This study also analyzed the correlation between the 3D D values and the urban form measurement indicators of floor-area ratio, building density, standard deviation of building floors, and average number of floors for the sub-research areas. An analysis of the bivariate Pearson Correlation, using IBM SPSS Statistics, showed that the 2D D value is significantly correlated with building density and the standard deviation of building floors at the 0.01 level (two-tailed), and the 3D D value is significantly correlated with floor-area ratio and average number of floors at the 0.01 level (two-tailed). The results indicate that building density is the main correlation indicator of the 2D D value, and the standard deviation of building floors reflects the degree of change in building height. It also reflects changes in the density of buildings of different heights. The 3D D value reflects the degree of occupation of a city's 3D space, which is perceived as a change in the density of the 3D vertical form of a city.
In this study, the changes in differences in 3D D value of form of each sub-study area were concretized, and the clustering morphological characteristics, based on the classification of floor area ratio, were proposed. As shown in Figure 5, by referring to the "Spacemate" method proposed by Metaberg Berghaus Pont of Delft University of Technology in the Netherlands, four indicators, namely the floor area ratio (FSI), building coverage rate (ground space index (GSI)), open space ratio (OSR), and average number of floors (L), were combined to establish a graph to evaluate the correlation between 3D D value and urban form. The difference in 3D D value in the vertical axis (FSI) was the most significant, with cluster intervals of 1.5-2.4, 2.4-4.5, and 4.5-6.5, respectively; the cluster intervals of the 3D D value were 2.47-2.53, 2.53-2.60, and 2.60-2.70, respectively. This study holds that the 3D fractal values of the 24 selected sub-study areas were significantly different, and it can be seen that the macro-measurement of the 3D D value of the overall urban form adopted by relevant literature cannot reflect the significant differences in micro-spatial form at the level of urban areas. The results showed that the low-density urban forms in Shenyang were mostly reflected in the range of 1.5-2.4, the high-density urban forms in Shenyang were between 2.4 and 4.5, and the cluster forms with urban agglomeration had a higher FSI of 4.5-6.5. It can be considered that the different density distribution states of modern cities can present different 3D fractal expectation values, and this range change can be understood as hierarchical differences in form among urban areas.
Shenyang were mostly reflected in the range of 1.5-2.4, the high-density urban forms Shenyang were between 2.4 and 4.5, and the cluster forms with urban agglomeration h a higher FSI of 4.5-6.5. It can be considered that the different density distribution states modern cities can present different 3D fractal expectation values, and this range chan can be understood as hierarchical differences in form among urban areas.

Form Hierarchy and System Embeddedness
The fractal characteristics of Shenyang's urban form reflect the hierarchy of its overall morphology and self-similar morphological order, i.e., its hierarchical structure and self-similar recursion. The main layout logic of urban planning is to match centralized service efficiency with decentralized service demand, with urban public facilities usually configured hierarchically according to the size and scope of the population served, and with different systems of facilities coordinated to form a city's spatial system. As a result, the spatial characteristics of an urban form inevitably reflect this morphological logic. In other words, the urban form is the result of the hierarchy's embeddedness and repeated superposition of self-similar forms, as well as the spatial relationship of its layout organization. In summary, Shenyang's urban form has the fractal characteristics of form hierarchy and system embeddedness, and the form hierarchy has clustering characteristics at different floor-area ratio intervals (see Figure 6). spatial characteristics of an urban form inevitably reflect this morphological logic. In other words, the urban form is the result of the hierarchy's embeddedness and repeated superposition of self-similar forms, as well as the spatial relationship of its layout organization. In summary, Shenyang's urban form has the fractal characteristics of form hierarchy and system embeddedness, and the form hierarchy has clustering characteristics at different floor-area ratio intervals (see Figure 6).

Morphological and System Similarities
The self-similarity of the fractal structures means that the morphological structure follows a regular pattern. The modern urban form follows similar morphological patterns; for example, the layout of various urban land-use types, combinations of different functions, and organizational relationships of systems all have self-similarity, thereby generating diverse (but similar) urban forms. In a specific cluster interval, it is difficult to identify differences in the form of urban areas with similar box-counting dimensions simply from their density relationships. This indicates that standardized modern urban construction produces similar block forms which are difficult to distinguish. Thus, morphological and system similarities are common features of the modern urban form, and standardized construction methods make it difficult to develop modern cities with unique, readily distinguishable characteristics.

General Rules and Density Distribution of Shenyang's Matrix Morphology
The 3D fractal dimension of a city reflects the 3D boxes occupying vertical height and corresponds to a patchwork of varying building heights in an actual urban form. The matrix morphology of a modern city is gradually shaped and controlled by unified norms

Morphological and System Similarities
The self-similarity of the fractal structures means that the morphological structure follows a regular pattern. The modern urban form follows similar morphological patterns; for example, the layout of various urban land-use types, combinations of different functions, and organizational relationships of systems all have self-similarity, thereby generating diverse (but similar) urban forms. In a specific cluster interval, it is difficult to identify differences in the form of urban areas with similar box-counting dimensions simply from their density relationships. This indicates that standardized modern urban construction produces similar block forms which are difficult to distinguish. Thus, morphological and system similarities are common features of the modern urban form, and standardized construction methods make it difficult to develop modern cities with unique, readily distinguishable characteristics.

General Rules and Density Distribution of Shenyang's Matrix Morphology
The 3D fractal dimension of a city reflects the 3D boxes occupying vertical height and corresponds to a patchwork of varying building heights in an actual urban form. The matrix morphology of a modern city is gradually shaped and controlled by unified norms and general rules, and different box dimension values reflect the morphological results of development in different urban areas. In addition, under different density relationships, higher D values are associated with unsatisfactory environments, and urban areas with high D values are more likely to contain unsuitable spaces (see Figure 7). Therefore, during urban planning, especially in areas controlled by general rules, land-use control at the micro-scale should be considered to create appropriate densities in urban areas. and general rules, and different box dimension values reflect the morphological results of development in different urban areas. In addition, under different density relationships, higher D values are associated with unsatisfactory environments, and urban areas with high D values are more likely to contain unsuitable spaces (see Figure 7). Therefore, during urban planning, especially in areas controlled by general rules, land-use control at the micro-scale should be considered to create appropriate densities in urban areas.

Conclusions
This study calculated the 3D fractal dimensions of 24 urban areas in Shenyang, Northeast China. The following results showed the following: (2) Shenyang's urban form has the fractal characteristics of morphological hierarchy and system embeddedness, and the correlation between the fractal dimension and floorarea ratio can be divided into three cluster intervals: 2.47-2.53, 2.53-2.60, and 2.60-2.70; (3) Through the analysis of the 3D fractal dimension value and its clustering characteristics, it can be seen that, under the construction rules of modern Chinese cities, the urban form will inevitably acquire the density morphological characteristics of 3D growth, similar forms, and density distribution. That is, the modern urban form is characterized by the spatial accumulation of clusters and patches of various forms, generally shaping the dense morphological characteristics of scattered height and density distribution. The density distribution of different areas produces different 3D fractal dimension results; (4) The research of this study shows that a new perspective of modern urban morphology research can be established through the study of 3D fractal at the meso-microscopic scale. At the theoretical level, the morphological phenomenon of fractal city can be identified and described, and its planning principles can be explained through its construction rules. In terms of design control, the appropriate index features of the three-dimensional fractal box can be used as a reference for design review.

Legend
Aggregation analysis Aggregation Degree Figure 7. Aggregation degree analysis of fractal morphology on density morphological characteristics of the study area. Source: Authors.

Conclusions
This study calculated the 3D fractal dimensions of 24 urban areas in Shenyang, Northeast China. The following results showed the following: (1) The 3D D values of the 24 sub-study areas varied from 2.41 to 2.70, and the 2D D values varied from 1.78 to 1.97. D value results between 2.41 and 2.70 can reflect the relative suitability of the fractal relationships between urban building forms in Shenyang; (2) Shenyang's urban form has the fractal characteristics of morphological hierarchy and system embeddedness, and the correlation between the fractal dimension and floor-area ratio can be divided into three cluster intervals: 2.47-2.53, 2.53-2.60, and 2.60-2.70; (3) Through the analysis of the 3D fractal dimension value and its clustering characteristics, it can be seen that, under the construction rules of modern Chinese cities, the urban form will inevitably acquire the density morphological characteristics of 3D growth, similar forms, and density distribution. That is, the modern urban form is characterized by the spatial accumulation of clusters and patches of various forms, generally shaping the dense morphological characteristics of scattered height and density distribution. The density distribution of different areas produces different 3D fractal dimension results; (4) The research of this study shows that a new perspective of modern urban morphology research can be established through the study of 3D fractal at the meso-microscopic scale. At the theoretical level, the morphological phenomenon of fractal city can be identified and described, and its planning principles can be explained through its construction rules. In terms of design control, the appropriate index features of the three-dimensional fractal box can be used as a reference for design review.

Discussion
(1) Different results for 3D fractal dimension values reflect the overall occupancy degree of the density relationship of morphology patches of urban areas in 3D space, and the spatial distribution of density patterns is highly correlated with the 3D growth degree and fractal dimension values. Therefore, in the form control of urban design, it is necessary to actively control the density relationship of urban matrix forms, and the index control of regulatory detailed planning can directly affect the form results of modern cities; (2) Natural or anthropogenic factors, such as rivers, green spaces, and railways, are important determinants of spatial agglomeration. However, in this study, the linear elements of cities, such as rivers and railways, are regarded as separation boundaries between areas, rather than the main spatial elements of block forms. This study investigated some morphological areas under centralized construction to reflect the influences of development and construction indexes on the 3D fractal characteristics of modern cities; (3) The description of the basic characteristics of modern urban forms can be analyzed based on the measurement results of morphological fractal dimension values of urban 3D areas in Shenyang. Range differences between the current results and that of previous studies are mainly reflected in the setting of measurement parameters and the precision of research objects. By comparing current and previous results, this study concluded that the density form of a modern city can be characterized as either dense or gradual. The dense form has a high degree of order and dense space, associated with feelings of restlessness, excitement, oppression, and vigor. This form also leads to deterioration in urban environment quality, insufficient facilities and services, and aesthetic fatigue. The gradual form has obvious balance and order, and an appropriate spatial scale. It is associated with peace, quiet, comfort, and pleasant aesthetic experiences. Thus, the form relationships of spatial details are highly correlated with people's perceptual experiences; (4) Modern urban form has the characteristics of strip and block division in terms of land use, significant spatial differentiation, and random differences in density, among others. These factors contribute to the regional distribution of similar density form relationships. This study holds that this description reveals the typical characteristics of the modern urban form, which is also the main reason for the similarity between modern urban spaces. Therefore, targeted research on the spatial order of density forms should be conducted. For example, the typological characteristics of density forms in different areas can be studied further to inform the planning and design guidelines for specific spatial units. At the same time, the control of urban form should be scientifically guided, not only from the perspective of spatial perception, but also from the perspective of digital rationality, based on the scale of cities and their morphological relationships. Informed Consent Statement: Not applicable.

Data Availability Statement:
The data presented in this study are available on request from the corresponding author. The data are not publicly available due to privacy reasons.