Dynamic Concentrated Solar Building Skin Design Based on Multiobjective Optimization

: Building skin can provide comprehensive functions of energy production, daylighting, and shading with an integrated transmissive solar-concentrating panel. In this study, Rhino Grasshopper parametric modeling, Ladybug tool performance simulation, and Octopus multiobjective optimization platforms are used to carry out experimental research. This study establishes the optimal relationship between the conﬂicting objectives of light environment creation and energy production efﬁciency of solar-concentrating skin by controlling three variables, namely the size of the solar-concentrating module, the rotation angle, and the number of modules, aiming to design the optimal solution and build a multiobjective optimization technology framework for the solar-concentrating skin of an ofﬁce space. A comparison and analysis of the scenarios indicate a dynamic concentrating skin that can effectively reduce the daylight glare probability (DGP) by 70% and increase the useful daylight illuminance (UDI) by 10%, while achieving energy production. The correlation between the variables and the performance indices of the solar-concentrating skin was obtained as angle > width > length > amount, and the optimal design interval for each parameter variable. This study reveals the laws of how parameter changes affect individual indicators, which can provide ideas for the design of dynamic concentrating skins and building integration, methods for improving the balanced design of indoor light environments and building capacity, and a technical framework for multiobjective optimization processes.


Introduction
According to the Global Building Construction Status Report 2021, the construction field accounted for 37% of energy-related CO 2 emissions in 2020 [1]. In the context of global advocacy for reducing carbon emissions, the construction field needs to change existing building energy efficiency policy standards and realize better energy-saving technologies to achieve a real transformation of the construction industry in order to cope with increasing carbon emissions. Using renewable energy to develop energy-efficient buildings to reduce energy consumption and carbon emissions is an important way to reduce carbon emissions and achieve green and sustainable development.
Building-integrated photovoltaics (BIPV) are widely used in this context and serve the purpose of saving energy and reducing carbon emissions. However, their traditional single form, integrated location, and uniform specifications limit the expression of the building facade form; this form is more monotonous after being integrated with the facade of the building, leading to its low application and acceptance [2]. Compared to integration on the roof of the building and integration of PV modules into the building curtain walls, windows, and other transparent parts, opaque modules will have an impact on the natural lighting of the building, resulting in problems such as insufficient illumination at the location of a large internal depth of the building, poor lighting uniformity, and annual daylight illumination in the effective range of the working time period, which does not meet the regulation method, which not only meets the requirements of developing low-carbon sustainable buildings but also creates a comfortable office environment and beautiful building for workers.
In this study, based on the preliminary design of the integration of the solar-concentrating skin and the building, we use parametric and multiobjective optimization methods to construct and test the performance and design the scheme of the space composed of the solar-concentrating skin. The following issues are explored: 1.
The equilibrium relationship between the indoor light environment and the energy output of the solar-concentrating skin under different states of dynamic concentrating skin, trying to solve the optimal integration problem of dynamic concentrating skin and building integration, providing different design solutions for integration and reducing energy consumption and carbon emissions.

2.
The intrinsic connection between the design parameters and the performance optimization target determines how the design parameters affect the performance optimization target, optimization range, and weight size of the design parameters by analyzing the relationship between the parameters and the performance. 3.
Through the optimal design of a dynamic concentrating epidermis, we attempt to construct a multiobjective optimization technology framework applicable to dynamic skin using the design-simulation-analysis method to solve the single-threaded optimization design.

Optimize Platforms and Processes
This section explains the design decision process for the optimization and the required optimization platform. This research relies on the Ladybug toolkit under the Rhino Grasshopper parametric modeling platform and the Octopus multiobjective optimization platform to optimize the design of multiple objectives. The Ladybug toolkit already has a built-in kernel of existing and proven simulation tools [27,28]. Octopus is a multiobjective solution platform that is stable, interactive, and efficiently visualized; it combines the Pareto optimal principle and genetic algorithms to generate a custom number search for solution generation, offering a wide range of possibilities for designers to choose from for multiobjective problems [29]. The Octopus platform can be used to search for optimal design solutions by controlling multiple metrics and is suitable for multiobjective studies on the indoor light environment and energy efficiency of the solar dynamic concentrating skins [30][31][32][33][34][35].
The solar dynamic concentrating skin multiobjective optimization process and the required tools are shown in Figure 1, including three stages. The first stage was the construction of the solar dynamic concentrating skin, including the design of the solar-concentrating module, the design of the solar dynamic concentrating skin, and the construction of the parametric information model in three parts. The design of the solar-concentrating module and solar-concentrating skin was determined based on integration with the building. The purpose of the construction of the parametric information model is to determine the design parameters and assign them to the study object. The design parameters determine the performance size when the performance simulation is performed. The second stage is the mapping of environmental information to model information and the establishment of optimization functions for the simulation of the light environment and capacity efficiency. This includes the determination of the evaluation objective function, calculation of the light transmission equivalence of the solar-concentrating module, and assignment of weather files and materials. The purpose of determining the evaluation function is to quantitatively and objectively evaluate the variability of the optimized performance. Weather files and material properties significantly influence the distribution of light. The transmittance calculation of the solar-concentrating module is primarily used to solve the construction problem of the Fresnel material. The third stage uses data analysis software to study the influence of design parameters on performance, and finally provides different optimization solutions. light. The transmittance calculation of the solar-concentrating module is primarily used to solve the construction problem of the Fresnel material. The third stage uses data analysis software to study the influence of design parameters on performance, and finally provides different optimization solutions.

Design of BICPV
The linear transmittance solar-concentrating module designed in this study is based on the theory of Fresnel concentrating, which concentrates direct light and transmits scattered light. Considering the scale, form, and characteristics of the selected light concentrating technology, combined with the parts integrated with the building, through repeated modifications and optimization of the solar-concentrating module, the final design of the solar-concentrating module for a general building window composition is shown in Figure 2. The designed solar-concentrating modules are arranged in an orderly manner, integrated with the building, and made to track the position of the sun in the working state by sensors to form a solar dynamic concentrating skin. To ensure the stability and

Design of BICPV
The linear transmittance solar-concentrating module designed in this study is based on the theory of Fresnel concentrating, which concentrates direct light and transmits scattered light. Considering the scale, form, and characteristics of the selected light concentrating technology, combined with the parts integrated with the building, through repeated modifications and optimization of the solar-concentrating module, the final design of the solar-concentrating module for a general building window composition is shown in Figure 2. light. The transmittance calculation of the solar-concentrating module is primarily used to solve the construction problem of the Fresnel material. The third stage uses data analysis software to study the influence of design parameters on performance, and finally provides different optimization solutions.

Design of BICPV
The linear transmittance solar-concentrating module designed in this study is based on the theory of Fresnel concentrating, which concentrates direct light and transmits scattered light. Considering the scale, form, and characteristics of the selected light concentrating technology, combined with the parts integrated with the building, through repeated modifications and optimization of the solar-concentrating module, the final design of the solar-concentrating module for a general building window composition is shown in Figure 2. The designed solar-concentrating modules are arranged in an orderly manner, integrated with the building, and made to track the position of the sun in the working state by sensors to form a solar dynamic concentrating skin. To ensure the stability and The designed solar-concentrating modules are arranged in an orderly manner, integrated with the building, and made to track the position of the sun in the working state by sensors to form a solar dynamic concentrating skin. To ensure the stability and durability of the solar-concentrating skin, the solar dynamic concentrating skin was placed between the double glazing, as shown in Figure 3.
Buildings 2022, 11, x FOR PEER REVIEW 5 of 2 durability of the solar-concentrating skin, the solar dynamic concentrating skin was placed between the double glazing, as shown in Figure 3. To study the effect of the change process of the solar dynamic concentrating skin on indoor light environment and energy efficiency, the standard office space in Xuzhou City Jiangsu Province (lat: 34.28, lon: 117.15) was selected as the simulation object of light en vironment and energy efficiency in this study. This office space has a single, south-facing plain, and fixed window with integrated solar dynamic concentrating skin at the window The solar-concentrating skin is located between the double glazing; the thickness of the double glazing is 6.0 mm and the spacing is 300 mm. The depth of the office space is 6.0 m, the opening is 3.3 m, and the net height is 3.6 m. The building window faces south, the window height is 3.0 m, the window width is 3.0 m, and the distances between the edge of the window and the upper, lower, left, and right sides of the south-facing wall are 0.20 m, 0.40 m, 0.15 m, and 0.15 m, respectively. An office space with integrated solar-concen trating skin is illustrated in Figure 4.  To study the effect of the change process of the solar dynamic concentrating skin on indoor light environment and energy efficiency, the standard office space in Xuzhou City, Jiangsu Province (lat: 34.28, lon: 117.15) was selected as the simulation object of light environment and energy efficiency in this study. This office space has a single, south-facing, plain, and fixed window with integrated solar dynamic concentrating skin at the window. The solar-concentrating skin is located between the double glazing; the thickness of the double glazing is 6.0 mm and the spacing is 300 mm. The depth of the office space is 6.0 m, the opening is 3.3 m, and the net height is 3.6 m. The building window faces south, the window height is 3.0 m, the window width is 3.0 m, and the distances between the edge of the window and the upper, lower, left, and right sides of the south-facing wall are 0.20 m, 0.40 m, 0.15 m, and 0.15 m, respectively. An office space with integrated solar-concentrating skin is illustrated in Figure 4. durability of the solar-concentrating skin, the solar dynamic concentrating skin wa placed between the double glazing, as shown in Figure 3. To study the effect of the change process of the solar dynamic concentrating skin o indoor light environment and energy efficiency, the standard office space in Xuzhou City Jiangsu Province (lat: 34.28, lon: 117.15) was selected as the simulation object of light en vironment and energy efficiency in this study. This office space has a single, south-facing plain, and fixed window with integrated solar dynamic concentrating skin at the window The solar-concentrating skin is located between the double glazing; the thickness of th double glazing is 6.0 mm and the spacing is 300 mm. The depth of the office space is 6. m, the opening is 3.3 m, and the net height is 3.6 m. The building window faces south, th window height is 3.0 m, the window width is 3.0 m, and the distances between the edg of the window and the upper, lower, left, and right sides of the south-facing wall are 0.2 m, 0.40 m, 0.15 m, and 0.15 m, respectively. An office space with integrated solar-concen trating skin is illustrated in Figure 4.

Constructing Parametric Information Models
(1) Determining design parameters Compared with office spaces with or without shading measures, the shading form, location, and size of the area have a direct impact on the indoor light environment. In this study, the solar-concentrating skin built between the double glazing exhibited shading and concentrating effects on the indoor light environment, similar to a shading element. Therefore, the size of the solar-concentrating module, size of the solar-concentrating skin composed of multiple solar-concentrating modules, and rotation angle of the solarconcentrating skin in the process of tracking the sun will change the distribution of light and affect the creation of an indoor light environment in an office space. The size, number, and angle of the solar-concentrating modules also affected the capacity efficiency of the solar-concentrating skin without considering the self-shading case. In summary, three factors, namely the size of the solar-concentrating module, number of arrays of the solar-concentrating module, and rotation angle of the solar-concentrating module, were considered as the design parameters for multiobjective optimization in this study.
(2) Constructing parametric models To consider computer performance, a parametric model of the motion and support structure that has no effect on the software simulation, the solar sensor that can be achieved through software settings, and the solar-concentrating cell that can be achieved by indirect calculation is simplified for modeling, and double glazing-which has a large impact on light-can be parametrically constructed. The linear Fresnel lens solar-concentrating module, which has a direct impact on the concentration and scattering of light, needs to be equated for its modeling and will be highlighted below.
First, the office space was parametrically modeled, and the length, width, and height were input to obtain the office space shape. Then the "list item" operator in Grasshopper was used to extract the south-facing wall of the building, and the four sides of the southfacing wall were offset 0.20 m, 0.40 m, 0.15 m, and 0.15 m, respectively, from the upper, lower, left, and right side of the wall as the protective structure of the window, and the middle part was used as the scope of the solar-concentrating skin. The "list item" operator was used to extract the top and bottom edges of the south-facing face of the original form, and its spacing was used as the maximum capacity spacing of the concentrating module. The "tween curve" operator was used to equidistantly separate the top and bottom lines according to the width of the spotting module to obtain the location of the plane where the spotting module is located. Then, the "rectangle" operator was used to draw the crosssection of the solar-concentrating module in the vertical plane of the split line, and "sweep 1" operator was used to draw the solar-concentrating module according to the length parameter. The centerline of the length of the solar-concentrating module is extracted as the rotation axis of the solar-concentrating module to track the rotation of the sun position.
The ratio of the maximum spacing to the width of the solar-concentrating module was used as the number parameter in the design (number of equally spaced dividers). The lengths of the two lines above and below are used as the length parameters of the solarconcentrating module, and the width parameter is closely related to the number parameter. The maximum number of solar-concentrating modules is 17. The distance between the two modules is 2.75 mm, the width is 160 mm, and the length is 3000 mm. Considering the large number of orthogonal matrices and subdivisions of design parameters that affect the calculation time, all design parameters were explored in their decreasing form in this study. The number of solar-concentrating modules was chosen to be decreasing in a single quantity, while the width and length of window modules were chosen to be decreasing by 10 mm and 100 mm, respectively. The angle was rotated to simulate the weather and climate file of the area where the object was located and selected according to the actual simulation time period and sun position. The specific settings of the design parameters are listed in Table 1, and the model was constructed, as shown in Figure 5.  The calculation range is determined by the calculation time period and the direction of solar radiation 0, 1, 2, 3, 4, 5, 6, 7, 8, 9 Figure 5. Parametric model construction procedure and design parameters.

Determine Optimization Objectives
Before proceeding with the energy model construction, the performance optimization objectives under the design parameters must be determined to purposefully transform the base model into a performance model. The most important feature of solar-concentrated skins over ordinary skins is that they can generate energy and change the light in the room while shading for indoor light environment problems, such as glare near the window, insufficient illumination deep in the room, and insufficient natural light in the effective range during working hours. Combining regulatory standards, light environment evaluation metrics, and metrics suitable for evaluating dynamic skin lighting performance [36][37][38][39], daylight glare probability (DGP) and useful daylight illuminance (UDI) are selected as the indoor light environment optimization objectives. The capacity efficiency of the solar-concentrating skin was used as the third optimization objective. The optimization target selection and criteria are listed in Table 2.

Determine Optimization Objectives
Before proceeding with the energy model construction, the performance optimization objectives under the design parameters must be determined to purposefully transform the base model into a performance model. The most important feature of solar-concentrated skins over ordinary skins is that they can generate energy and change the light in the room while shading for indoor light environment problems, such as glare near the window, insufficient illumination deep in the room, and insufficient natural light in the effective range during working hours. Combining regulatory standards, light environment evaluation metrics, and metrics suitable for evaluating dynamic skin lighting performance [36][37][38][39], daylight glare probability (DGP) and useful daylight illuminance (UDI) are selected as the indoor light environment optimization objectives. The capacity efficiency of the solarconcentrating skin was used as the third optimization objective. The optimization target selection and criteria are listed in Table 2.

. Construction of Optimal Objective Evaluation Function
In order to investigate the relationship between the design parameters of the solarconcentrating skin and the multiobjective optimization, the results during the time period of the entire year were selected as the evaluation indices in the study, and the simulation procedures for the evaluation of each optimization objective are shown in Figure 6. Among the selected indoor light environment optimization targets, UDI belongs to the dynamic evaluation index of natural lighting throughout the year, whereas DGP is a static index at a certain moment. To evaluate the light environment optimization targets at the same level, improve the computer's calculation speed of the DGP, and achieve the optimization purpose of reducing glare instead of eliminating it, this study simplifies the calculation of the DGP index. In clear sky, the glare value is maximum at 12:00 noon every day, and if the glare is reduced with a large probability at 12:00 noon, it can represent the achievement of the optimization purpose. First, we calculated the glare magnitude at 12 noon every day of the year under unobstructed conditions, and then selected the moments with large values of glare concentration in different seasons of the year for calculation and simulation and took the ratio of the number of days less than 0.4 in the DGP simulation results to the total number of days simulated as the optimization target. The viewpoint looking out of the window at a 1.2 m elevation from the center point of the indoor floor was selected as the simulation point. The glare evaluation function is given by Equation (1).
where f 1 (a) stands for glare target evaluation function (%) and n x is the number of calculations at 1.2 m elevation of the center point of the indoor floor at the time of selection. DGP <0.4ix is the i-th DGP simulation result less than 0.4 in the selected time. UDI was selected at 0.75 m elevation from the floor of the office space as the grid analysis surface for natural lighting performance, with a grid size of 0.2 m, and the timeshare of the illuminance value satisfying in the simulation results as the optimization target. The UDI evaluation function is given in Equation (2).
where f 2 (b) is the UDI target evaluation function (%) and n represents the number of illuminance calculation points on the horizontal working surface at 0.75 m elevation indoors. UDI 100−2000i is the percentage of time that the i-th calculation point satisfies the 100 lux-2000 lux condition.
An equivalent conversion method was used in this study to optimize the solarconcentrating skin capacity efficiency. The solar-concentrating skin has the property of concentrating and absorbing direct light and transmitting scattered light, while it can gen-erate energy by absorbing direct light for concentrating. Thus, the energy efficiency of the solar-concentrating skin can be equivalent to the amount of concentrated direct light. The sunlight propagates in the form of electromagnetic radiation, and the solar-concentrating characteristics also use radiation for energy production. The direct solar radiation flux can be used to achieve an equivalent conversion to concentrating energy production. The calculation of direct solar radiation flux is based on a special meteorological dataset for the thermal environment analysis of Chinese buildings and the radiation flux obtained by importing EPW files with Ladybug tools. Direct solar radiation fluxes were obtained by analyzing and filtering the sunless hours at night for each hour of the day from 8:00 a.m. to 5:00 p.m. throughout the year. Because the solar-concentrating skin cannot convert all the radiation flux into energy, the annual direct radiation flux is accumulated and multiplied by the area of the solar-concentrating skin and the solar-concentrating efficiency [7] to obtain the annual capacity efficiency of the solar-concentrating skin. The evaluation function of the capacity efficiency of the solar-concentrating skin is shown in Equation (3).
where f 3 (c) is the evaluation function of the capacity efficiency of the solar-concentrating skin (w/h), I DH i is the direct radiation flux at time i on day t of the year, n is the calculation period, and T is the number of days in the year. S is the area of the solar-concentrating skin, and η is the solar-concentrating efficiency of the solar-concentrating skin.

Simulation Parameters Setting 2.4.1. Climate Data and Sky Models
The selection of climate data affects the accuracy of the indoor lighting environment simulations. The free EnergyPlus Weather Date (EPW) file provided by the U.S. Department of Energy's EnergyPlus website is used more frequently at home and abroad [41], and the weather data file provided by this website can provide accurate climate analysis for academic institutions and laboratories. In this study, the EPW meteorological file of Xuzhou City, Jiangsu Province, was obtained through this website to ensure that the area to which the simulated space belonged was highly similar to the climatic conditions of the real building space. For the sky model, the internationally used CIE standard sky was selected, and sun-type sunny sky was used as the real sky model for the simulation.

Calculation of the Equivalent Model of the Concentrated Light Surface
The solar-concentrating module is a linear Fresnel lens with internal grooves, which cannot be accurately constructed for the grooves during the simulation and affects the given material; therefore, it needs to be equated. The solar-concentrating skin converges direct light for energy production, reducing the amount of direct light entering the room. Therefore, the linear Fresnel lens can be equated to a low-transmittance ordinary glass material where only scattered light can enter the room. Under ideal conditions, only the ratio of the scattered luminous flux through ordinary glass to the total luminous flux needs to be calculated. The transmittance was calculated as the scattered light flux in the full wavelength band and not the scattered light flux in the visible wavelength band. Given that the full-band luminous flux in the simulated environment cannot be obtained in real time, and the time-by-time radiant flux provided by the EPW file is the full-band solar radiation, the solar radiant flux can represent the luminous flux for simplified calculation of the glass transmittance. The focus of this study is on the optimal design and technical framework construction of solar-concentrating skin; therefore, this study will calculate the transmittance of low-transmittance ordinary glass using the scattered radiation flux obtained from the EPW file.
The sun position and climate conditions determine the magnitude of the scattered luminous flux, and the sun position must be tracked during the simulation period to calculate the scattered luminous flux at the simulation moment. Therefore, based on the rotation angle of the solar-concentrating skin obtained from the EPW file during the simulated period in the above design parameters, the scattered luminous flux projected onto the solar-concentrating skin was calculated to achieve the equivalence of the optical properties of the solar-concentrating module composed of a linear Fresnel lens. The detailed calculation is given in Equation (4).
where τ is the light transmission rate of ordinary glass material, I dh is the scattered radiation flux, and I Th is the total radiation flux.

Material Parameters and Optimization Platform Setting
Performance simulations using Ladybug and Honeybee require that the parametric model be given radiance material and converted to a recognizable Honeybee model. The types of materials included office space walls, double glazing, and solar-concentrating skins. The walls and double glazing used preset materials from the simulation library, and the solar-concentrating skins used ordinary glass materials with different scattered luminous flux ratios after equivalent modeling. The parameter settings for each material are presented in Table 3.  (4)) In this study, using the Octopus multiobjective optimization platform, a genetic algorithm was used to search for the Pareto optimal solution set satisfying the performance metrics and design parameter equilibrium. The O-side of the Octopus module operator is the performance optimization target port, and the G-side is the parameter variable gene port. The three covariates of solar-concentrating skin-size (length and width), amount, and angle-were connected to the O-port. Because the Octopus operator is optimized only in the direction of the minimum value, the three metrics of DGP, UDI, and solar-concentrating skin capacity efficiency are connected to the G-terminus by algebraic operations. Based on the combination of optimization objectives, simulation accuracy, and calculation time, specific parameters are entered in the Octopus module operator panel (see Table 4.), and then the optimization calculation begins.

Optimization Interval Analysis
The experimental simulation was run for 196 h with 50 iterations of computation, 191 solution sets were obtained for the gene pool, and the optimization results gradually converged to a convergence trend after the 15 th generation. The multiaxis view in Figure 7 shows that each performance index value gradually concentrates from the maximum value to the minimum value, and the optimal solution set floats and gradually concentrates near the minimum value. The simulation results show that the DGP calculation range is 0.00-1.00; the UDI rounding calculation range is 42.45-61.80%; and the capacity efficiency rounding calculation range is 13.01 Kw·h-332.39 Kw·h.
Because the ratio of the number of days less than 0.4 in the DGP simulation results in the total number of days simulated was used as the optimization target, including the number of days that reduce glare but do not meet the requirement, the percentage of the optimization target was 0. Therefore, 32 sets of Pareto optimal solutions in the 15th-generation convergence state were selected, and the 32 sets of solutions were ranked with the unfavorable factor index in the light environment index as the main optimization objective. The group with a DGP percentage of 0 was excluded to obtain 26 sets of Pareto optimal solutions (see Table 5). The optimal distributions of the 26 sets of optimized solutions are shown in Figure 8. The design parameters and performance objectives of the optimal solution were statistically analyzed to obtain the optimal interval and maximum percentage of parameters, as shown in Table 6. solution sets were obtained for the gene pool, and the optimization results gradually converged to a convergence trend after the 15 th generation. The multiaxis view in Figure 7 shows that each performance index value gradually concentrates from the maximum value to the minimum value, and the optimal solution set floats and gradually concentrates near the minimum value. The simulation results show that the DGP calculation range is 0.00-1.00; the UDI rounding calculation range is 42.45-61.80%; and the capacity efficiency rounding calculation range is 13.01 Kw·h-332.39 Kw·h. Because the ratio of the number of days less than 0.4 in the DGP simulation results in the total number of days simulated was used as the optimization target, including the number of days that reduce glare but do not meet the requirement, the percentage of the optimization target was 0. Therefore, 32 sets of Pareto optimal solutions in the 15th-generation convergence state were selected, and the 32 sets of solutions were ranked with the unfavorable factor index in the light environment index as the main optimization objective. The group with a DGP percentage of 0 was excluded to obtain 26 sets of Pareto optimal solutions (see Table 5). The optimal distributions of the 26 sets of optimized solutions are shown in Figure 8. The design parameters and performance objectives of the optimal solution were statistically analyzed to obtain the optimal interval and maximum percentage of parameters, as shown in Table 6.      As shown in Table 6, the maximum percentage of DGP ranges from 80% to 90%, the maximum percentage of UDI ranges from 56% to 60%, and the maximum percentage of concentrating efficiency ranges from 42.05 Kw·h to 90.00 Kw·h. Among the design parameters, the maximum percentages of the size and number of solar-concentrating module parameters were in the lower part of the analysis range, and the rotation angle parameters were in the upper part of the analysis range. The results show that the larger the number of solar-concentrating modules and the smaller the number of rotation angles, the more favorable the performance optimization objective; thus, when the parameters of the module are in the range of Table 6, it is the best parameter for the module and the design of integration with the building. For example, the module size in 3 m × 0.14 m and the integration angle in 25 • is the best design parameter for the module, which can obtain a better indoor light environment at the same time of obtaining the maximum energy. The actual design is usually chosen for different purposes, all of which should be based on the simulated optimal parameters to choose the design parameters that are most beneficial to building performance. When the purpose is based on maximizing energy output, a larger angle or larger width should be chosen within the simulated optimal parameters to obtain the maximum energy output. However, the optimal parameters of the simulation are obtained based on the weather climate of the simulated location and are not applicable to the integrated design of other locations, so further solving is required when changing locations.

Correlation Analysis of Performance Indicators and Design Parameters
To investigate the relationship between each optimization objective and other performance objectives and design parameters when optimal, first, 26 sets of data for the three performance indicators were analyzed by regression fitting, and the optimized relationship of the three performance indicators was obtained, as shown in Figure 9. From this relationship, it is concluded that the overall trend of DGP optimization is between 50% and 80%, UDI and CE both have higher performance and gradually show a decreasing trend, and UDI and CE decrease as DGP increases. The set of optimized solutions in this interval is also smaller, although it is in the optimal solution, which may be mainly because the optimization prefers the optimal solution for a certain indicator. When the DGP is between 80% and 100%, the UDI tends to rise and then decrease as the DGP increases, and the CE tends to fall to the lowest point and then increase as the DGP increases. Analysis of the dependent variable may be the main reason that the angle of rotation of the spotlight skin decreases, and the surface area of the skin increases, resulting in a large amount of light being absorbed by the solar-concentrating skin of light indoor effective illumination is reduced, and the energy produced increases. From the set of 26 optimal solutions, the typical solutions with three optimization objectives, each optimal and one integrated optimal, were selected, and their positions on the regression curves were analyzed, as shown in Figure 9. The case parameter indicators are shown in Table 7. In the UDI optimal solution, DGP is the smallest and CE is also higher; in the DGP optimal solution, CE is the smallest and UDI is above 58%; in the CE optimal solution, both DGP and UDI are above 60%; in the combined optimal solution, each index has a high value and CE and UDI intersect at the regression curve.      Figure 9. Performance metrics regression analysis. The correlation analysis between each variable and each performance index ( Figure  10) showed that the correlation coefficient between DGP and UDI was 0.883, a high negative correlation; the correlation coefficient between DGP and capacity efficiency was 0.750, a high negative correlation; and the correlation coefficient between UDI and capacity efficiency was 0.629, a moderate positive correlation. The main reason is that the DGP and UDI are calculated from scattered light and the capacity efficiency is calculated from direct  The correlation analysis between each variable and each performance index ( Figure  10) showed that the correlation coefficient between DGP and UDI was 0.883, a high negative correlation; the correlation coefficient between DGP and capacity efficiency was 0.750, a high negative correlation; and the correlation coefficient between UDI and capacity efficiency was 0.629, a moderate positive correlation. The main reason is that the DGP and UDI are calculated from scattered light and the capacity efficiency is calculated from direct  Figure 9. Performance metrics regression analysis. The correlation analysis between each variable and each performance index ( Figure  10) showed that the correlation coefficient between DGP and UDI was 0.883, a high negative correlation; the correlation coefficient between DGP and capacity efficiency was 0.750, a high negative correlation; and the correlation coefficient between UDI and capacity efficiency was 0.629, a moderate positive correlation. The main reason is that the DGP and UDI are calculated from scattered light and the capacity efficiency is calculated from direct  The correlation analysis between each variable and each performance index ( Figure  10) showed that the correlation coefficient between DGP and UDI was 0.883, a high negative correlation; the correlation coefficient between DGP and capacity efficiency was 0.750, a high negative correlation; and the correlation coefficient between UDI and capacity efficiency was 0.629, a moderate positive correlation. The main reason is that the DGP and UDI are calculated from scattered light and the capacity efficiency is calculated from direct

3-CE Optimal
The correlation analysis between each variable and each performance index ( Figure 10) showed that the correlation coefficient between DGP and UDI was 0.883, a high negative correlation; the correlation coefficient between DGP and capacity efficiency was 0.750, a high negative correlation; and the correlation coefficient between UDI and capacity efficiency was 0.629, a moderate positive correlation. The main reason is that the DGP and UDI are calculated from scattered light and the capacity efficiency is calculated from direct light when the solar-concentrating skin is performing capacity and light harvesting. The negative correlation between UDI and DGP may be because when the DGP is larger, there is less glare in the room, which weakens the light and leads to insufficient effective illumination. Among the covariates, the angle covariate had a high correlation with the three performance indicators of DGP (−0.755), UDI (0.668), and capacity efficiency (0.994); the width covariate had a moderate correlation with DGP (0.500) and a high correlation with capacity efficiency (0.848); the number covariate had a high correlation with capacity efficiency (0.648), and the length covariate had a high correlation with performance metrics but no correlation. The regression analysis of each covariate with the performance indices yielded a functional relationship between the indices and performance, as shown in Table 8. From the fit of the curves, it can be concluded that the number and length variables have no obvious relationship with each performance index, and the angle and width variables have a more obvious relationship with each performance index. The distribution of the 26 solution sets (Figure 8) and the regression curves show that among the angular variables, the solution sets are mainly located at the two ends of the curve, 24 • -26 • and 52 • -56 • , respectively, and the latter has higher values on the curve than the former. The main reason is probably that when the angle is small, the concentrating module blocks less direct light, and more daylight enters the room so that the UDI of the room to meet the work is low, and the DGP near the window has a small value and a high optimization rate. The angle is larger at noon, the concentrating module shades more direct light, the light entering the room becomes less, the UDI of the room to meet the work is increased, the value of DGP is small, and the optimization rate becomes smaller. The width variables are more uniformly distributed on the curve, and the variables with more distribution in the UDI and CE indicators are 0.16 m and the values of UDI and CE at 0.16 m are higher than other width variables. The main reason for this is that when at 0.16 m, there is the more blockage of direct light, so the values of UDI and CE become bigger. The value of DGP is the small, and the DGP optimization rate is smaller.
Since the performance targets are influenced and constrained by multiple variables, combining the fit of the regression function, the magnitude of the correlation between each parameter and the performance index, and the magnitude of the trend of the fitted curve, it is concluded that the angle parameter is the main consideration in the multiobjective design of the concentrating skin, followed by the width parameters, whose amount and length can be disregarded under small variations.

Comparative Analysis of Integrated Solar-Concentrating Skin, Integrated Common Skin, and No Integrated Skin
The DGP, as an important indicator of unfavorable factors in an indoor light environment, is considered the main optimization target. Therefore, the 26 sets of solution sets are divided into three parts according to the magnitude of DGP values, and then the solarconcentrating skin scheme with higher optimization rate and other variables that are also

Comparative Analysis of Integrated Solar-Concentrating Skin, Integrated Common Skin, and No Integrated Skin
The DGP, as an important indicator of unfavorable factors in an indoor light environment, is considered the main optimization target. Therefore, the 26 sets of solution sets are divided into three parts according to the magnitude of DGP values, and then the solarconcentrating skin scheme with higher optimization rate and other variables that are also

Comparative Analysis of Integrated Solar-Concentrating Skin, Integrated Common Skin, and No Integrated Skin
The DGP, as an important indicator of unfavorable factors in an indoor light environment, is considered the main optimization target. Therefore, the 26 sets of solution sets are divided into three parts according to the magnitude of DGP values, and then the solarconcentrating skin scheme with higher optimization rate and other variables that are also

Comparative Analysis of Integrated Solar-Concentrating Skin, Integrated Common Skin, and No Integrated Skin
The DGP, as an important indicator of unfavorable factors in an indoor light environment, is considered the main optimization target. Therefore, the 26 sets of solution sets are divided into three parts according to the magnitude of DGP values, and then the solarconcentrating skin scheme with higher optimization rate and other variables that are also

Comparative Analysis of Integrated Solar-Concentrating Skin, Integrated Common Skin, and No Integrated Skin
The DGP, as an important indicator of unfavorable factors in an indoor light environment, is considered the main optimization target. Therefore, the 26 sets of solution sets are divided into three parts according to the magnitude of DGP values, and then the solarconcentrating skin scheme with higher optimization rate and other variables that are also

Comparative Analysis of Integrated Solar-Concentrating Skin, Integrated Common Skin, and No Integrated Skin
The DGP, as an important indicator of unfavorable factors in an indoor light environment, is considered the main optimization target. Therefore, the 26 sets of solution sets are divided into three parts according to the magnitude of DGP values, and then the solarconcentrating skin scheme with higher optimization rate and other variables that are also       The DGP, as an important indicator of unfavorable factors in an indoor light environment, is considered the main optimization target. Therefore, the 26 sets of solution sets are divided into three parts according to the magnitude of DGP values, and then the solar-more blockage of direct light, so the values of UDI and CE become bigger. The value of DGP is the small, and the DGP optimization rate is smaller.
Since the performance targets are influenced and constrained by multiple variables, combining the fit of the regression function, the magnitude of the correlation between each parameter and the performance index, and the magnitude of the trend of the fitted curve, it is concluded that the angle parameter is the main consideration in the multiobjective design of the concentrating skin, followed by the width parameters, whose amount and length can be disregarded under small variations.

Comparative Analysis of Integrated Solar-Concentrating Skin, Integrated Common Skin, and No Integrated Skin
The DGP, as an important indicator of unfavorable factors in an indoor light environment, is considered the main optimization target. Therefore, the 26 sets of solution sets are divided into three parts according to the magnitude of DGP values, and then the solar-concentrating skin scheme with higher optimization rate and other variables that are also better is selected from the three parts for a comparative study with the skin without integration and the skin with common sunshade module integration. From the data in Table 9, it can be seen that among the three scenarios, the scenarios with no skin and ordinary skin cannot produce energy because they cannot converge and absorb the sunrays, whereas solar-concentrating skin has a more efficient energy output, and the annual capacity efficiency can be as high as 332.39 Kw·h. In the DGP target simulation time period, the percentage of no skin scheme appearing less than 0.4 is 0, indicating that both will show glare. In the normal skin scheme and the solar-concentrating skin scheme, the percentage of DGP of the normal skin scheme is still 0, whereas the reduction rate of glare by the concentrating skin reaches approximately 70% on average. The main reason may be that ordinary skins do not reduce direct light but change the distribution of direct light through reflection of the material, resulting in glare, whereas solar-concentrating skins absorb direct light through their own characteristics, reducing the probability of glare. For the UDI, the skinless solution has a lot of light entering the room; however, it is not a sufficiently effective illumination to satisfy the indoor workers' work. The solar-concentrating skin and ordinary skin solutions significantly increase the effective illumination of the room by absorbing direct light and blocking part of the unfavorable light, improving illumination in the range of approximately 10%. The difference between normal skin and concentrating skin in terms of UDI is small; however, normal skin has a significant impact on the blockage of the field of view compared to concentrating skin, which has a better performance ability. To more clearly demonstrate the three skin scenarios under different covariates, Scheme 2 was selected for visualization and comparison, as shown in Table 10.  Table 10. Scheme 2 metrics visualization comparison chart.

Different Integration Schemes DGP Visualization UDI Visualization
The solar-concentrating skin

Research Innovation
With the development of photovoltaic technology, the use of photovoltaic modules in buildings has become a way to use renewable energy; however, the integration of photovoltaic module forms with buildings can also affect the aesthetics of the building facade. Unlike previous studies that have addressed the integrated aesthetics of PV modules and the aesthetic potential of the modules [42,43], as well as the design of PV module geometries [16], this paper is more about optimizing the initial design through performance, starting from objective performance goals. The photovoltaic module used in this experiment was a transparent solar-concentrating-type module. Because it is transparent to operate, blocking the field of view less, it has a better visual experience perception than the CPV-T concentrating model and lens wall composite parabolic concentrating modules designed by Liang et al. [44] and Xuan et al. [45], and the shape is designed according to the adaptation window with a certain degree of aesthetics. In addition, compared with the study of Yi, Y, K [35], this paper achieves a balanced optimization of the three objectives by considering the energy efficiency of solar concentrating as the optimization objective, while in the study of Xuan et al. [46], the energy efficiency, daylight objective, and the parabolic concentrating module are considered, while the parabolic concentrating module is placed in the skylight. However, this paper starts from the building façade, which can be directly perceived by human vision, and quantifies the performance index to explore the concentrating module and the integrated design with the building.
The simulation results show that the optimal tracking angle of the solar-concentrating module in this paper is in the range of 24 • -56 • , which is smaller than the 20 • -70 • proposed by Liang et al. [47]. However, the tracking type solar-concentrating modules used in this paper have certain advantages in vertical energy harvesting compared to the static solarconcentrating modules of Liu et al. [48] and Liang et al. [47]. Due to the absorption of direct light, the concentrating module can effectively reduce DGP by about 70% and improve UDI by about 10% compared to the nonmodule and common module, which improves the comfort of indoor light environment in general. Eltaweel et al. [49] used louvers to reflect sunlight into the room to improve indoor lighting and had over 90% of the indoor area can reach a UDI of 300-500 lux during working hours, unlike this paper, which can provide UDI in the range of 100-2000 lux for an average of 60% of the annual working hours; from Table 10, it can be calculated that 81% of the indoor area can achieve more than 60% of the time share., and the indoor year-round UDI level is at 58.71% (Table 5), which is lower than the low-frequency transmittance concentrating module designed by Zhang et al. [21] for the integration of light windows.

Limitations and Future Directions
Although the use of parametric methods for multiobjective optimization exhibit significant advantages, the accuracy and range of parameter settings still affect the distribution space of the optimized solution set. The calculated values of each design parameter in this experiment (Table 1) were chosen to take values in a decreasing form without a finer division, such as the number of solar-concentrating modules, based on one change, which would change the distribution of the solution set space based on two changes.
In addition, the solar-concentrating module is essentially a linear Fresnel lens, which is composed of tiny inscribed grooves that will change the light to achieve convergence of light; however, considering the simulation length of the experiment and the difficulty of constructing the inscribed grooves, this experiment equates the linear Fresnel lens into an ordinary glass with different transmittances; the projection and refraction of ordinary glass to change the light and inscribed grooves to change the light are somewhat different, which will have some impact on the experiment. The focus of the equivalence method was to calculate the transmittance. Because the luminous flux of the full wavelength band of the sun cannot be obtained in real time, the ratio of solar scattered radiation to total radiation was used as the approximate transmittance in this study, which has some deviation from the actual transmittance and will have an impact on the calculation accuracy. Therefore, the covariates should be further subdivided and the equivalence method should be changed in future studies to provide more accurate experimental results.
Based on the analysis of the optimization relationship between the dynamic concentrating skin design parameters and performance indices, this experiment provides a scheme and basic data for integrated design and constructs a multiobjective optimization workflow for solar-concentrating skin. In future work, we will optimize the solar-concentrating skin, design a more visually aesthetic skin, and explore the impact of skin on indoor light distribution.

Conclusions
This study uses Rhino Grasshopper as the parametric modeling platform and Ladybug, Honeybee, and Octopus as the performance analysis and data-processing platforms to demonstrate the entire modeling, simulation, and analysis process in detail. This study