Mineralogical Study of the Advanced Argillic Alteration Zone at the Konos Hill Mo–Cu–Re–Au Porphyry Prospect, NE Greece

: The Konos Hill prospect in NE Greece represents a telescoped Mo–Cu–Re–Au porphyry occurrence overprinted by deep-level high-sulfidation mineralization. mineralization is exposed in the deeper parts of the system and comprises quartz stockwork veins hosted in subvolcanic intrusions of granodioritic composition. Ore minerals include pyrite, molybdenite, chalcopyrite, and rheniite. In the upper part of the system, intense hydrothermal alteration resulted in the formation of a silicified zone and the development of various advanced argillic alteration assemblages, which are spatially related to N–S, NNW–SSE, and E–W trending faults. More distal and downwards, advanced argillic alteration gradually evolves into phyllic assemblages dominated by quartz and sericite. Zunyite, along with various amounts of quartz, alunite, aluminum phosphate–sulfate minerals (APS), diaspore, kaolinite, and minor pyrophyllite, are the main minerals in the advanced argillic alteration. Mineral-chemical analyses reveal significant variance in the SiO 2 , F, and Cl content of zunyite. Alunite supergroup minerals display a wide compositional range corresponding to members of the alunite, beudantite, and plumbogummite subgroups. Diaspore displays an almost stoichiometric composition. Mineralization in the lithocap consists of pyrite, enargite, tetrahedrite/tennantite, and colusite. Bulk ore analyses of mineralized samples show a relative enrichment in elements such as Se, Mo, and Bi, which supports a genetic link between the studied lithocap and the underlying Konos Hill porphyry-style mineralization. The occurrence of advanced argillic Rare Earth Elements-bearing APS minerals, mark the proximity of the hypogene advanced argillic alteration zone to the porphyry environment.

This study is an extended version of a paper by Mavrogonatos et al. [35]; it presents further geological and mineralogical data regarding the Konos Hill lithocap and aims to expand previous knowledge on the mineralogy and mineral chemistry of advanced argillic alteration zones in the Sapes district. The study emphasizes in the mineral-chemical implications of phases such as zunyite and APS minerals, because they may constitute an exploration tool for new mineralized centers in the adjacent areas and can be used to define the physicochemical conditions of the transition from the porphyry to the epithermal environment in the Konos Hill prospect.

Materials and Methods
Twenty rock samples were collected from the advanced argillic-altered rocks of the Konos Hill area for petrographic, mineralogical, mineral-chemical, and geochemical studies. From these samples, sixteen polished-thin sections underwent detailed petrographical investigation using an Axio Scope.A1 (Zeiss) transmitted light microscope.
Powders from ten representative samples were analyzed by X-ray diffraction, using a Siemens/Bruker 5005 X-ray diffractometer at the Faculty of Geology and Geoenvironment, National and Kapodistrian University of Athens. Results were evaluated using the software package DIFFRACplus, EVA (version 10.0). Alteration assemblages in selected rock chips were also determined using short-wave infrared spectroscopy (SWIR) with a portable TerraSpec 4 Standard-Res mineral analyzer.
The chemical compositions of selected minerals (alunite-natroalunite, APS, diaspore, zunyite) were determined by electron probe microanalysis (EPMA) using a JEOL 8530F instrument at the Institute of Mineralogy, University of Münster, Germany. Analytical conditions included a 15-kV accelerating voltage, a 5-nA beam current, and counting times of 10 s for peaks and 5 s for the background signal. Natural (for Na, Mg, Al, Si, Mn, Fe, Sr, Cl, Ba, K, Ca, P, and S) and synthetic (for F, Ti, Cr, La, Ce, Nd, and Pb) mineral standards were used for calibration prior to quantitative analyses. The phi-rho-z correction was applied to all data. Standard deviations of the major oxides are within 1-2%. Oxides and elements that were analyzed and their average (1σ) detection limits are: Na2O (0.046 wt %), MgO (0. 43  In addition, eight mineralized lithocap samples were analyzed commercially by inductively coupled plasma mass spectrometry (ICP-MS package AQ251) at ACME analytical laboratories in Vancouver, BC, Canada, in order to determine their metal concentrations.

Regional Geology
The Hellenides are part of the Alpine orogenic system and form the link between the Dinarides (e.g., Albania) to the NW and the Pontides in the east (e.g., Turkey). They comprise a SW-vergent succession of tectonic units, which were integrated in three continental blocks (Rhdopes, Pelagonia, External Hellenides/Adria) and two oceanic domains, the Vardar and Pindos, respectively [36,37].
Among these units, lithologies of the Rhodope Massif, located mainly in NE Greece (Figure 1), record a long and rather complex tectonometamorphic history related to terrane accretion, subsequent exhumation of deep-seated crustal rocks along major detachment faults, and formation of metamorphic core complexes [38]. They are divided into three major lithological subdomains: (a) the North Rhodope domain; (b) the Southern Rhodope Core complex (also including the Kerdyllion Unit); and (c) the Chalkidiki block, which consists of the so-called Serbo-Macedonian Massif, with the exception of the Kerdyllion Unit [36]. Core complex formation and associate exhumation of highgrade metamorphic rocks in the Rhodope Massif occurred during two periods. The first  is related to the subduction of the Pindos ocean and accretion of the Pelagonian microcontinent to the Eurasian margin [39,40]. The second, at ~35 Ma [41], is related to subduction and accretion of the External Hellenides continental block with contemporaneous inception of subduction in the Mediterranean ocean.
The North Rhodope domain consists of (a) a lower high-grade unit of basement rocks, including the metamorphic core complexes of Arda, Biala Reka-Kechros, and Kesebir-Kardamos; (b) an intermediate unit comprising high-grade basement rocks; and (c) an upper unit consisting of lowgrade metamorphic sequences of the Circum-Rhodope belt and ophiolitic rocks [42]. The Southern Rhodope Core Complex comprises Paleozoic orthogneisses (possibly equivalent to those of the metamorphic core complexes of the North Rhodope domain [37]) and a thick succession of Triassic marbles, with intercalations of amphibolitic and metapelitic rocks. Locally, anatectic conditions were achieved, as evidenced by migmatites on Thasos island and within the Kerdyllion unit. Finally, the Chalkidiki block represents a thrust system composed of NW-trending units, comprising various lithologies including ophiolitic rocks.  [22]). The white diamond marks the location of the study area.
Lithologies of the Rhodope were exhumed during a late Cretaceous to Tertiary, syn-to postorogenic collapse. The deep-seated metamorphic successions were uplifted along major detachment faults, resulting in the formation of metamorphic core complexes and the opening of several E-W-trending, structurally controlled basins [43,44]. Syn-extensional sedimentation, which lasted from the upper Eocene to Miocene, resulted in the deposition of extensive sequences of transgressive conglomerates, limestones, and sandstones [45]. During the orogenic collapse, contemporaneous asthenospheric upwelling due to crustal thinning gave rise to widespread late Eocene to Miocene, postsubduction magmatism. Igneous rocks formed outcrops extensively in the Rhodope and Serbo-Macedonian domains [46]. Magmatic rocks have calc-alkaline to shoshonitic and ultrapotassic affinities, and have mafic to felsic compositions [46,47]. In many cases, magmatism was followed by intense hydrothermal alteration, which lead to the formation of abundant mineral deposits, mainly in the Rhodopic, and to a lesser extent, the Serbo-Macedonian domains [43,48].

Local Geology
In the Kassiteres-Sapes district, lithologies of the Circum-Rhodope Belt crop out, especially in its southern part. Metasedimentary lithologies of the Makri unit are most widespread (Figure 1).
Eocene volcanosedimentary rocks discordantly overlie the metamorphic basement and occupy most of the study area.
The Konos Hill area is part of a deeply eroded volcanic edifice built on the Eocene sedimentary deposits [23]. This volcanic edifice comprises mostly subvolcanic intrusions of calc-alkaline to high-K calc-alkaline affinities, as well as lava domes, flows, and pyroclastic rocks. Both magmatic and pyroclastic rocks are characterized by intense hydrothermal alteration.
Konos Hill, its most prominent topographic feature, is located approximately 20 km N-NW of Alexandroupolis and consists of a hydrothermally altered granodiorite which intruded the volcanosedimentary rocks ( Figure 2). Further to the ENE in the study area, a monzodioritic body intruded the volcanosedimentary rocks and the granodiorite. Available geochronological data for the monzodiorite yielded cooling ages of 31.9 ± 0.5 Ma (Rb/Sr on biotite [49]) and 32.6 ± 0.5 Ma ( 40 Ar/ 39 Ar on biotite [50]). Recently, Perkins et al. [51] conducted a U-Pb zircon geochronological study on the Kassiteres magmatic suite, showing that magmatism occurred between 32.05 ± 0.02 and 32.93 ± 0.02 Ma. Previous studies in this area have shown that the granodiorite hosts the Konos Hill porphyry Mo-Cu-Re-Au porphyry prospect [22,26,27].
Major faults in the Konos Hill area strike N-S, NNE-SSW, and E-W ( Figure 2) and are usually high-angle faults (dipping between 60-80°). Zones of advanced argillic alteration mostly trend E-W and are related to the previously mentioned fault directions, indicating that magma emplacement, hydrothermal alteration, and associated mineralization were structurally controlled.

Alteration and Mineralization
Hydrothermal alteration and mineralization occurring in the Kassiteres-Sapes district have been well-studied [23][24][25][26]35,[52][53][54]. Advanced argillic-altered lithocaps have been recognized at a number of sites [23]. Among them, Konos Hill is located in the eastern part of the district and comprises the highest topographic level of the area.
Advanced argillic alteration at Konos Hill is related to E-W, N-S, and NNW-SSE trending fault lines. The latter direction is also related to porphyry-style stockwork outcrops, which are best exposed at lower elevation ( Figure 3a). In the uppermost part, acidic leaching of the granodiorite resulted in a structurally controlled and spatially restricted zone, which comprises residual quartz with a vuggy texture. This zone grades outwards and downwards into alunite-rich assemblages (Figure 3b-e), which comprise alunite + APS minerals + quartz + zunyite ± pyrophyllite and quartz + alunite + APS minerals + diaspore + kaolinite ± pyrophyllite. Hematite pseudomorphs after pyrite accompany the abovementioned assemblages. The Konos Hill lithocap is deficient of any primary sulfides due to extensive supergene oxidation; however, it hosts a low-grade Au mineralization (see Section 4.3). On the contrary, nearby lithocaps at Agios Demetrios, Scarp, Viper, and Agia Barbara host significant high-sulfidation epithermal, gold-enargite mineralization, which is generally found in the western part of the study area [22][23][24][25][55][56][57]. Advanced argillic alteration assemblages evolve downwards through a transitional zone of quartz + alunite + pyrophyllite + sericite into a typical sericite-rich assemblage, which is the most widespread type of hydrothermal alteration in the district. The latter hosts porphyry-style (A-and banded) quartz stockwork (Figures 3f and 4i) and D-type quartz-sericite veins with a pyrite-molybdenite-chalcopyrite-rheniite mineralization [22,26,27]. Minor amounts of enargite, colusite, tetrahedrite-tennantite group minerals, and galena occur both within the veins and as disseminations in the sericitic-altered granodiorite and comprise a highsulfidation mineralization superimposed on the porphyry system.
Extensive sericitic alteration also affected outcrops of the volcanosedimentary succession as well as parts of the monzodiorite intrusion, especially along fault planes. It grades further outwards into propylitic alteration that is characterized by varying amounts of epidote, chlorite, and carbonates.

Diaspore
Diaspore is generally found as euhedral to subhedral crystals measuring up to 0.2 cm in size. Commonly, it forms isolated grains scattered in a fine-grained matrix of tabular alunite crystals and quartz (Figure 4c). Diaspore also forms aggregates of fine-grained subhedral crystals that replace earlier mineral phases of the silicified rock such as feldspars (Figures 4d and 5c). In some cases, diaspore crystals occur as euhedral grains in fissures or cracks in the matrix. Electron microprobe analyses reveal near stoichiometric compositions with traces of TiO2, BaO, and REE, mostly Ce2O3 and Nd2O3 (up to 0.18, 0.98, 0.38, and 0.22 wt %, respectively; Table 1). Concentric zoning patterns occur in some crystals (Figure 4c), but are apparently not associated with chemical variations.
The APS minerals studied here comprise solid solution members of the beudantite and plumbogummite subgroups. They plot along the 1:1 line in Figure 6a and display a progressive substitution of PO4 3− by SO4 2− , coupled with a substitution of monovalent (K, Na) by divalent (Ca, Ba, Sr) cations in the D site. Compositions that plot further below this line display a significant variation in P, whereas compositional variations in the D site are limited. This points towards protonation of one of their trivalent anions to establish charge balance. Moreover, the APS minerals that are devoid of monovalent cations (P > 1 apfu) are also characterized by a 1:1 substitution in the monovalentbearing D site by divalent cations (Figure 6b), whereas compositions that plot below this line indicate significant vacancies due to charge balance. In addition, APS compositions that exhibit elevated phosphate contents are, according to Scott [62], consistent with the appearance of trivalent cations substituting in the A site of the minerals. This is mirrored by the presence of Ce-rich varieties such as florencite-(Ce) in Konos Hill. This substitution is in agreement with the findings of Voudouris [23] and Voudouris and Melfos [29], who studied the APS mineralogy of the Kassiteres-Sapes and Melitena prospects, respectively.  Alunite and natroalunite are the most common representatives of the supergroup and are found as minor constituents in the vuggy silica in both quartz + zunyite + kaolinite ± pyrophyllite and quartz + diaspore + kaolinite ± pyrophyllite assemblages, as well as in the transitional zone to the sericitic alteration. They are generally found in tabular-shaped or rhombohedral crystals that replaced earlier formed phenocrysts (e.g., feldspars, Figure 4g) or mafic minerals in the host rocks. However, pseudocubic shapes were also observed (Figures 4e-h and 5). In other cases, tabular alunite forms in small veinlets crosscutting the silicified matrix. Many alunites are K-rich, with K2O values reaching up to almost 9 wt % (Table 3). This corresponds to an average chemical formula of K0.39Na0.30Ca0.01Ba0.01Al3.06(SO4)1.96(PO4)0.01. Sodium-rich alunite is more common and usually forms euhedral, tabular-shaped crystals with sizes up to 500 μm. In this case, the Na2O content is higher than K2O and reaches up to 5.51 wt %, corresponding to the average formula Na0.61 K0.35Ca0.01Al3.01(SO4)1.98(PO4)0.01. Substitution between Na and K in the D sites of alunite is almost ideal, leading to complete substitution of K by Na (Figure 6c). However, the majority of the analyzed compositions deviate from the ideal 1:1 substitution, probably reflecting vacancies in the structure, as proposed by Scott [62] and in accordance with the findings of Voudouris [23]. Moreover, a few analyses plot above the 1:1 line and probably reflect a partial excess of K or Na in the D sites. Many grains of alunite carry traces of CaO, FeO, SrO, BaO, La2O3, Ce2O3, and Nd2O3 (values up to 0.38, 0.46, 0.38, 0.75, 0.42, 0.36, and 0.33 wt %, respectively). In some cases, oscillatory zoning is present in alunite crystals, as shown by alternations of concentric K-and Na-rich bands in Figure 6e,f. Many alunite grains, especially the tabular-shaped, zoned natroalunite, include cores of APS minerals, mostly woodhouseite or svanbergite.

Kaolinite-Pyrophyllite
Kaolinite and pyrophyllite are present as minor constituents and usually form small, acicular aggregates that accompany quartz-alunite-APS-diaspore and quartz-alunite-zunyite-APS assemblages. Their presence, in addition to microscopic examination, was verified by X-ray diffraction and SWIR investigations.

Bulk Ore Geochemistry
Bulk analyses of advanced argillic-altered samples reveal (Table 4)

Genetic Implications
Advanced argillic lithocaps form in higher topographic levels from the condensation of magmatic vapors into surface waters, and slightly postdate the potassic alteration in the porphyry environment and the advanced argillic alteration in the high sulphidation environment [8,63]. Field and mineralogical data from the Konos Hill area are consistent with the concept of hypogene formation of the advanced argillic alteration. This is in agreement with the findings of Voudouris [23] and Voudouris and Melfos [29], who described similar assemblages from advanced argillic-altered rocks in the Kassiteres-Sapes and Melitena districts, respectively. The occurrence of both advanced argillic and transitional to sericitic alteration zones in the Konos Hill area is similar to other porphyry/epithermal transitional systems (e.g., Lepanto-Far Southeast, Philippines [5]; Asarel porphyry Cu deposit, Bulgaria [64]), and is the result of different degrees of hydrolytic alteration of the host rocks.
The presence of zunyite in the Konos Hill lithocap [35] reflects the availability of F and Cl in the hydrothermal fluid and can be used to constrain the conditions of formation of the studied assemblages. Estimations can be made based on similar advanced argillic alteration assemblages reported in the literature. A low-temperature limit is set by the coexistence of zunyite with pyrophyllite, which according to Reyes [65,66], is not stabilized at temperatures below 200 °C. Based on isotopic and microthermometric data, Watanabe et al. [10] reported formation temperatures of 260 to 350 °C for an assemblage of zunyite + topaz + diaspore + pyrophyllite in the Kobui area of Hοkkaido, Japan. A similar temperature range (~250 to 380 °C) was reported for the assemblage of topaz + alunite + diaspore + APS + pyrophyllite from the Koryphes Hill area, where topaz, not zunyite, is the F-carrier [24]. Based on similarities between the studied occurrence and the Hugo Dummett porphyry Cu-Au deposit, a T range of 280-350 °C is likely, based on the data of Khasgherel et al. [15]. Further constraints can be made since alunite at Konos Hill contains APS minerals, which according to Hedenquist et al. [5] are formed in a high-temperature environment at the margins of a magmatic intrusion, compared to APS-free alunite. Chemical zonation in the alunite supergroup minerals in the current study, according to Stoffregen and Alpers [12], reflects fast changes in the physicochemical variations in the hydrothermal fluid (decrease in pH and temperature). In addition, the widespread presence of Na-rich alunite versus its K-rich counterpart may suggest either higher temperatures of formation or a higher concentration of Na during the formation of the assemblages. This hypothesis is in accordance with the findings of Chang et al. [67], who stated that high Na/(Na + K) ratios in alunites from the Mankayan area in the Philippines mark the proximity of the assemblage to the intrusive body. In addition, the chemical composition (e.g., Sr/Pb and La/Pb ratios) of alunite can be used as exploration tools, since Pb is highly soluble in higher temperatures and is preferably incorporated in the alunite structure in distal assemblages, where the hydrothermal fluid is cooler, as is the case for the Mankayan deposit [67]. However, at the Melitena prospect, Pb-rich APS minerals are associated with the porphyry-style mineralization [29]. The studied alunites from the Konos Hill prospect are Pb-free, similarly to alunites from the broader Kassiteres-Sapes district [23], thus precluding any application of Pb as an exploration tool, according to Chang et al. [67]. In contrast, the elevated concentrations of Sr and REE in the studied alunite supergroup minerals, as expressed by the presence of woodhouseite and REE-bearing APS minerals (e.g., florencite-Ce) suggest the proximity to the causative intrusion and could be used as an exploration tool in the study area.
Bulk ore analyses from lithocap samples yielded low concentrations of Au and Ag, but significant enrichment in chalcophile elements such as Mo, Se, Bi, and Pb, which were probably introduced after the early event of acid leaching. Similar element anomalies are also reported from the advanced argillic alteration lithocap of Agia Barbara, in the broader Kassiteres-Sapes district, by Voudouris [23].
The fact that advanced argillic zones in the Konos Hill area display a more-or-less E-W trend, which follows the major tectonic orientation of the granodiorite emplacement, suggests that the SO2and HCl-bearing magmatic vapor may have ascended through these fault planes.
Close to the paleosurface, it condensed into surficial water and formed the advanced argillic alteration assemblages in a typical HS environment, in accordance with the findings of Holley et al. [68], who studied the Veladero Au-Ag HS epithermal mineralization. Moreover, the presence of the Konos Hill lithocap suggests that detailed mapping and mineralogical studies in hypogene advanced argillic alteration zones are critical, due to their common cogenetic and close spatial relations with porphyry-style mineralization in many prospects in Greece [23,29]. The presence of F-bearing phases such as zunyite, alunite, APS minerals, diaspore, and pyrophyllite at Konos Hill provides a potential vector towards possible hidden intrusions that may host porphyry-style mineralization.

Conclusions
The Konos Hill prospect represents a porphyry system genetically related to an intensively altered granodiorite intrusion and is overprinted by deep-level high-sulfidation mineralization. Alteration styles recognized include deep sericite and sodic-sericite assemblages associated with a quartz stockwork, which is overprinted by hypogene advanced argillic alteration. Quartz-alunite-APS-diaspore-kaolinite ± pyrophyllite and quartz-alunite-APS-zunyite-kaolinite ± pyrophyllite assemblages predominate. Transitional zones are typified by the presence of sericite. Electron microprobe data reveal wide variations in the composition of the alunite supergroup minerals. Alunite and natroalunite are widespread and are associated with APS minerals, which comprise members of the beudantite and plumbogummite subgroups and usually form in the cores of Na-rich alunite crystals. Common compositions include woodhouseite and svanbergite, whereas crandallite and florencite are quite rare. Mineralization in the lithocap is characterized by a relative enrichment in chalcophile elements such as Bi, Mo, and Se, supporting the hypothesis of a spatial and temporal connection between the lithocap and the underlying porphyry-style mineralization. The presence of zunyite indicates that a F-and Cl-vapor ascended from the intrusive body under decreasing temperature conditions. Based on paragenetic relations and available literature data, a temperature of formation between 280-350 °C is likely for the studied assemblages. Zunyite (or other F-bearing phases, such as topaz) along with the presence of diaspore, pyrophyllite, and Sr-and REE-bearing APS minerals, could be used as an exploration tool, since they mark the proximity of the hypogene advanced argillic alteration zones to the porphyry environment.