Paleo-Tethyan Ocean Evolution and Indosinian Orogenesis in the East Kunlun Orogen, Northern Tibetan Plateau

: The East Kunlun Orogen on the northern margin of the Tethyan orogenic system records a history of Gondwana dispersal and Laurasian accretion. Uncertainties remain regarding the detailed histories of northern branches of the Paleo-Tethys Ocean in East Kunlun Orogen (Buqingshan Ocean). Based on a synthesis of sedimentary, structural, lithological, geochemical, and geochronological data from the East Kunlun Orogen and adjacent regions, this paper discusses the spreading and northward consumption of the Paleo-Tethys Ocean during Late Paleozoic–Early Mesozoic times. The main evolutionary stages are: (1) during Carboniferous to Middle Permian, the Paleo-Tethys Ocean (Buqingshan Ocean) was in an ocean spreading stage, as suggested by the occurrence of Carboniferous MORB-, and OIB-type oceanic units and Carboniferous to Middle Permian Passive continental margin deposits; (2) the Buqingshan Ocean subducted northward beneath the East Kunlun Terrane, leading to the development of a large continental magmatic arc (Burhan Budai arc) and forearc basin between ~270–240 Ma; (3) during the late Middle Triassic to early Late Triassic (ca. 240–230 Ma), the Qiangtang terrane collided with the East Kunlun–Qaidam terranes, leading to the ﬁnal closure of the Buqingshan Ocean and occurrences of minor collision-type magmatism and potentially inception of the Bayan Har foreland basin; (4) ﬁnally, the East Kunlun Orogen evolved into a post-collisional stage and produced major magmatic ﬂare-ups and polymetallic mineral deposits between Late Triassic to Early Jurassic (ca. 230–200 Ma), which is possibly related to asthenospheric mantle upwelling induced by delamination of thickened continental lithosphere and partial melting of the lower crust. In this paper, we propose that the Wilson cycle-like processes controlled the Late Paleozoic–Early Triassic tectonic evolution of East Kunlun, which provides signiﬁcant implications for the evolution of the Paleo-Tethys Ocean.


Regional Geology
In this paper, we integrate new sedimentary and detrital zircon geochronological data from EKO with available magmatic, sedimentary, geochemical, and structural records relevant to the Late Paleozoic-Mesozoic evolution of the EKO. Based on these data, we aim to provide important insights into the development of the northern branch of the Paleo-Tethys Ocean and reconstruct the paleogeography of the Northern Paleo-Tethys Ocean in EKO.

North Kunlun Terrane
The NKT features exposures of Precambrian basement and Paleozoic metamorphic rocks (Figures 2a, 3 and 4) intruded by Paleozoic-Mesozoic granitoids and minor Neoproterozoic granites.
Precambrian basement is mainly represented by the Paleoproterozoic Jinshuikou Group and the Mesoproterozoic Langyashan Formation. Jinshuikou Group can be subdivided into Baishahe and Xiaomiao formations based on distinctive rock associations and metamorphic grades. Baishahe Formation is characterized by paragneiss, amphibolites, marbles, and schists. Metamorphic pressure-temperature (P-T) conditions estimated for the paragneiss and amphibolite from the Baishahe Formation are P = 0.45−1.19 kbar and T = 638−896 • C [93]. Xiaomiao Formation consists of schists, quartzites, and marbles interlayered with minor metabasalts. Protoliths of these rocks were a suite of mudstones, quartz sandstones, and limestones deposited in a rift basin setting [94]. Metamorphic grades reach lower amphibolite facies. Recently, some researchers have suggested that Baishahe and Xiaomiao formations may be assigned to the Paleoproterozoic and Mesoproterozoic, respectively, based on the youngest detrital zircon ages of 2.2 Ga in the Baishahe Formation and 1.6 Ga in the Xiaomiao Formation [95,96]. Langyashan Formation is defined by a suite of carbonates, including dolomites, limestones, and minor siltstones, and phyllites [97]. Neoproterozoic strata are missing in the NKT. Baishahe Formation and 1.6 Ga in the Xiaomiao Formation [95,96]. Langyashan Formation is defined by a suite of carbonates, including dolomites, limestones, and minor siltstones, and phyllites [97]. Neoproterozoic strata are missing in the NKT. Paleozoic metamorphic rocks are represented by the NaijTai Group composed of low-grade metamorphic volcanic-sedimentary rocks [98]. The Upper Silurian to Lower Devonian Maoniushan Formation (molasse strata) is restricted to the central fault of the EKO and includes conglomerates, sandstones, and siltstones, as well as minor bimodal basalt-rhyolite volcanics. These rocks are considered a molasse formed during a post-orogenic stage related to the closure of the Proto-Tethys Ocean [99].
In addition, HP-UHP metamorphic belts incorporating eclogites and granulites are exposed along the southern margin of the NKT. They have peak and retrograde metamorphic ages of 430-410 Ma. Coesite pseudomorphs in garnet, quartz exsolution rods in om-Paleozoic metamorphic rocks are represented by the NaijTai Group composed of low-grade metamorphic volcanic-sedimentary rocks [98]. The Upper Silurian to Lower Devonian Maoniushan Formation (molasse strata) is restricted to the central fault of the EKO and includes conglomerates, sandstones, and siltstones, as well as minor bimodal basalt-rhyolite volcanics. These rocks are considered a molasse formed during a postorogenic stage related to the closure of the Proto-Tethys Ocean [99].
In addition, HP-UHP metamorphic belts incorporating eclogites and granulites are exposed along the southern margin of the NKT. They have peak and retrograde metamorphic ages of 430-410 Ma. Coesite pseudomorphs in garnet, quartz exsolution rods in omphacite, and P-T calculations suggest that these eclogites experienced UHP metamorphic conditions at 29-30 kbar and 610-675 • C, possibly representing the final closure of the Proto-Tethys Ocean [19,26,100].

South Kunlun Terrane
The SKT consists of Precambrian basement, Neoproterozoic-Early Paleozoic metasedimentary-volcanic rocks (e.g., the NaijTai Group, Saishiteng Formation), widespread Late Paleozoic to Mesozoic sedimentary rocks, and minor Early Paleozoic and Late Permian-Triassic granites (Figures 3 and 4). The Precambrian basement includes the Baishahe and Xiaomiao formations and the Kuhai Group, the rock associations which are similar to those of the NKT. The Mesoproterozoic Kuhai Group is chiefly distributed in the eastern section of the SKT and characterized by schists, paragneisses, amphibolites, and marbles. This group is also part of the metamorphic basement.
The Wanbaogou and NaijTai groups are distributed mainly in the Northern SKT and composed of basaltic lavas, terrigenous and volcaniclastic rocks, and limestones. Some workers reported that the Wanbaogou Group formed around 762 Ma and that it developed in a continental rift or an incipient oceanic basin [101], representing the peak stage of Rodinia breakup and a precursor of the Proto-Tethys Ocean in the East Kunlun Ranges. Zircon U-Pb dating and geochemical study of the NaijTai Group shows that these rocks formed in an Early Paleozoic back-arc basin environment [98], which may have been related to the northward subduction of the Proto-Tethys Ocean.
Carboniferous successions consist of two distinct units named the Haleguole (Lower Carboniferous) and Haoteluowa (Upper Carboniferous) formations. The Haleguole Formation consists of fine-grained quartz sandstones, siltstones, and mudstones, grading upward into thin-bedded limestones. The Haoteluowa Formation comprises thin-to thick-bedded limestones and mudstones interlayered with sandstones. These successions were deposited in a littoral shallow marine environment on a passive continental margin, which formed in response to the opening of the Paleo-Tethys Ocean [102,103]. Widespread Upper Permian-Triassic strata overlie the pre-Permian strata with an angular unconformity and consist mainly of conglomerates, sandstones, siltstones, mudstones, and limestones.

Bayan Har Terrane
The BT is characterized by minor occurrences of the Mesoproterozoic Ningduo Group and Permian Huangyangling Formation and more widespread expanses of the Triassic Bayan Har Group. These are unconformably overlain by the Jurassic Yeerqiang Group (Figure 4). The Ningduo Group consists of paragneisses, schists and quartzites. The Huangyangling Formation is sparsely distributed in the northern part of the BT and consists of sandstones, slates, and minor interbedded volcanic rocks. The Bayan Har Group consists of the Lower to Middle Triassic Gande Formation and the Upper Triassic Qingshuihe Formation. The former is composed of medium-grained lithic arkoses and subarkoses interbedded with slates. These sedimentary rocks were deposited in bathyal to abyssal environments [104]. The Qingshuihe Formation incorporates sericitic slates, silty slates, and calcareous siltstones interlayered with sandstones and minor conglomerates at higher levels, representing sediments of a typical deep marine turbidite fan system.

Buqingshan Accretionary Complex
The Buqingshan AC is of a regional scale and separates the East Kunlun terrane to the north from the Bayan Har terrane to the south ( Figure 2a). Geographically, it extends from Animaqen in the east, through Buqingshan, and into the Muztagh area in the west ( Figure 2). It is characterized by a widespread mélange matrix with numerous tectonic blocks showing typical block-in-matrix structures [105,106] (Figures 5 and 6).     The mélange matrix is typically composed of highly deformed turbiditic rocks, which are also referred to as the Lower to Middle Permian Maerzheng Formation in the literature [14] (Figures 6 and 7). In addition, Zhang et al. [107] suggested that the depositional age of the Maerzheng Formation ranges from Early Permian to Early Triassic based on the radiolarian fossil assemblages. This formation is characterized by a succession of mediumto coarse-grained sandstones, siltstones, and mudstones interlayered with minor conglomerates, which are deposited in a submarine fan setting. Their detrital zircon U-Pb spectra are dominated by ages of 396-573 Ma and 727-947 Ma with minor age peaks at 1117-1993 Ma and 2319-3063 Ma [14,108], suggesting a depositional source from pre-Devonian orogenic basement rocks of EKO. It is suggested that the turbidites were deposited in an oceanic trench environment and then incorporated into a subduction wedge. Recently, other workers suggested that some part of the Maerzheng Formation was originally deposited on a passive continental margin during Early-Middle Permian time and could have been tectonically incorporated into the Buqingshan AC [14,107]. However, it is a challenge to differentiate which part represents the trench in this mélange zone because of its similarity of rock associations in the field. vonian orogenic basement rocks of EKO. It is suggested that the turbidites were deposited in an oceanic trench environment and then incorporated into a subduction wedge. Recently, other workers suggested that some part of the Maerzheng Formation was originally deposited on a passive continental margin during Early-Middle Permian time and could have been tectonically incorporated into the Buqingshan AC [14,107]. However, it is a challenge to differentiate which part represents the trench in this mélange zone because of its similarity of rock associations in the field. Mélange blocks mainly include fragments of Cambrian ophiolites, Carboniferous ophiolites and oceanic island basalts (OIBs), seamount limestones, with a minor contribution of the Mesoproterozoic metamorphic basement (Kuhai Group). The Cambrian ophiolites possibly indicate the existence of a much earlier Proto-Tethys Ocean that was tectonically incorporated into the Buqingshan AC during Triassic orogenesis [4,106]. Carboniferous ophiolites and oceanic island assemblages (basalts and limestones) record the spreading of the Paleo-Tethys Ocean in the EKO [2,106,109,110]. Kuhai Group metamorphic rocks could represent a continental slice that rifted from the SKT during the opening of the Paleo-Tethys Ocean. The detailed geochemistry and tectonic affinities of these blocks are discussed in Section 3 below.

Ocean Plate Stratigraphy in the Buqingshan AC
Ocean plate stratigraphy (OPS) is defined as the original composite stratigraphy of the ocean floor before it was incorporated into an accretionary complex (AC) at a convergent margin. It records the succession from the initiation of the oceanic plate at a mid-oceanic ridge to subduction at an oceanic trench [111][112][113]. A typical OPS section may consist of mantle peridotite, mid-ocean ridge basalt (MORB), ocean island basalt (OIB), seamount limestone, pelagic chert, hemipelagic siliceous shale, mudstone, and even rifted continental slices [114][115][116]. The identification of OPS in an AC allows one to reveal the evolution of paleo-oceans from their opening recorded in the OPS to their closure recorded in accretionary and collisional complexes [115].
Based on a field survey and previous data, OPS rock units in the Buqingshan AC are predominantly distributed in the Animaqen, Buqingshan, Maerzheng, and Muztagh areas from east to west (Figure 2a). They generally occur as isolated blocks sandwiched between deformed siltstones and sandstones (Figure 7a,c). In this study, we collated a total of 68 reliable published geochemical data points for the Buqingshan AC. These results show the geochemical diversity of the OPS sequences, such as depleted and refractory mantle peridotite, MORB-and OIB-type mafic rocks.

Mantle Peridotites
Ultramafic rocks from the Derni, East Haerguole, and Changliugou ophiolites are mostly altered to serpentinites or serpentinized lherzolites and harzburgites. Geochemically, they exhibit two distinct groups of mantle compositions. Peridotites in the East Haerguole area are mainly serpentinized harzburgites characterized by depletion in Al 2 O 3 , CaO, and TiO 2 and enrichment in MgO, indicating high degrees of mantle melting. In the chondrite-normalized rare earth element (REE) diagrams, these samples exhibit a V-shaped distribution pattern (Figure 8a), and the heavy REEs (HREEs) are closer to forearc mantle peridotites than to abyssal peridotites [117]. These characteristics indicate they represent relict mantle subjected to approximately 20-25% partial melting of the primitive mantle. In the primitive mantle-normalized trace element diagram (Figure 8b), these samples show enrichment in fluid-soluble elements (large ion lithophile elements (LILEs), Rb, Ba, U, and Th) and depletion in high field strength elements (HFSEs). Such features may suggest a refractory forearc mantle environment.    In contrast, the mantle peridotites in the Derni and Changliugou areas are predominately serpentinized lherzolites characterized by relative enrichments in Al2O3, CaO, TiO2, and depletions in MgO [124,125], pointing to lower degrees of mantle melting. The Cr# values (100*Cr/(Cr+Al)) of spinel from the Derni ophiolite range from 30 to 57, which is identical to those of the abyssal mantle (<60). In the chondrite-normalized REE diagram, these samples show a weakly light REE (LREE)-rich distribution pattern (Figure 8a), and the HREEs are akin to abyssal mantle peridotites [117]. This further suggests that they represent a relict mantle that has undergone approximately 2-6% partial melting of the primitive mantle. These mantle peridotites are interpreted to have formed in a fastspreading mid-ocean ridge environment during the Late Carboniferous time [124].  [118] and Sun and McDonough [119]. Detailed geochemical data are presented in Supplementary Table S1. Representative data are from East Haerguole, Gerizhuotuo, Derni, and Maji areas [109,110,[120][121][122][123][124].
In contrast, the mantle peridotites in the Derni and Changliugou areas are predominately serpentinized lherzolites characterized by relative enrichments in Al 2 O 3 , CaO, TiO 2 , and depletions in MgO [124,125], pointing to lower degrees of mantle melting. The Cr# values (100 * Cr/(Cr + Al)) of spinel from the Derni ophiolite range from 30 to 57, which is identical to those of the abyssal mantle (<60). In the chondrite-normalized REE diagram, these samples show a weakly light REE (LREE)-rich distribution pattern (Figure 8a), and the HREEs are akin to abyssal mantle peridotites [117]. This further suggests that they represent a relict mantle that has undergone approximately 2-6% partial melting of the primitive mantle. These mantle peridotites are interpreted to have formed in a fast-spreading mid-ocean ridge environment during the Late Carboniferous time [124].

MORB-Type Oceanic Crust
Carboniferous-Permian MORB-type mafic rocks are mainly located in the Animaqen and Buqingshan regions. They are typically made up of pillow basalt, massive basalt, and fine-grained gabbro. They are characterized by low SiO 2 , variable MgO, and high TiO 2 and are classified as tholeiitic series rocks. In particular, the TiO 2 contents are higher than those of island arc lavas (<1.0 wt.%) and lower than those of OIBs, whereas they are comparable to those of normal MORB (N-MORB) (=1.5 wt.%) [126]. In the chondrite-normalized REE patterns (Figure 8c,e), these samples exhibit overall depletion in LREEs relative to HREEs with REE patterns similar to that of the N-MORB reference line. In addition, they exhibit depletion in most LILEs and flat distribution of HFSEs without any Nb and Ta anomalies in the primitive mantle-normalized trace element spider diagrams, which also suggests N-MORB affinities (Figure 8d,f). On a tectonic setting discrimination diagram (Figure 9a), they predominantly plot within the mid-ocean ridge environment and show a depleted mantle source (Figure 9b). High ε Nd (t) values of +8.4 to +9.6 further support this conclusion [123].
Gabbros from the Buqingshan area yield an LA-ICP-MS zircon age of 333 ± 3 Ma [120], which is close to the Ar-Ar age of 345 ± 8 Ma [122,123], directly constraining formation ages to the Middle Carboniferous.
parable to those of normal MORB (N-MORB) (=1.5 wt.%) [126]. In the chondrite-normalized REE patterns (Figure 8c,e), these samples exhibit overall depletion in LREEs relative to HREEs with REE patterns similar to that of the N-MORB reference line. In addition, they exhibit depletion in most LILEs and flat distribution of HFSEs without any Nb and Ta anomalies in the primitive mantle-normalized trace element spider diagrams, which also suggests N-MORB affinities (Figure 8d,f). On a tectonic setting discrimination diagram (Figure 9a), they predominantly plot within the mid-ocean ridge environment and show a depleted mantle source (Figure 9b). High εNd(t) values of +8.4 to +9.6 further support this conclusion [123]. Gabbros from the Buqingshan area yield an LA-ICP-MS zircon age of 333 ± 3 Ma [120], which is close to the Ar-Ar age of 345 ± 8 Ma [122,123], directly constraining formation ages to the Middle Carboniferous.

OIB-Type Basalts and Seamounts
Seamount assemblages are mainly located in the Gerizhuotuo, Haerguole, and Majixueshan regions from west to east. They are typically made up of a basaltic basement overlain by cherts, limestones, and slope facies sedimentary rocks (Figure 7a,d). The basaltic basement consists of a pillow and massive basalts (Figure 7a). The carbonates comprise locally fossiliferous massive/micritic limestone (Figure 7c). The slope facies consist of basaltic and limestone breccias. They have similar characteristics to the well-described oceanic island/seamount associations worldwide [112].
Geochemically, the basalts are mainly characterized by low SiO2, intermediate MgO, and high TiO2 and are representative of the tholeiitic series. The TiO2 contents are similar to those of OIBs (=2.0 wt.%) [126]. On chondrite-normalized REE patterns ( Figure 8g) these samples exhibit enrichment in LREEs relative to HREEs with REE patterns similar to the OIB reference line. They also show enrichment in LILEs, Ti, Nb, and Ta in primitive mantle-normalized trace element spider diagrams, further suggesting OIB affinities ( Figure  8h). On a discrimination diagram for tectonic settings (Figure 9a), all samples plot in the within-plate-basalt (WPB) field and show a similar affinity to OIB. Petrogenesis implies that they are the products of low-degree partial melting of lherzolite in the asthenospheric mantle [110,121,127]. Some researchers consider these basalts to have formed during the Carboniferous-Permian based on stratal relationships and whole-rock Rb-Sr age data (340 ± 11 Ma) [3,121].

OIB-Type Basalts and Seamounts
Seamount assemblages are mainly located in the Gerizhuotuo, Haerguole, and Majixueshan regions from west to east. They are typically made up of a basaltic basement overlain by cherts, limestones, and slope facies sedimentary rocks (Figure 7a,d). The basaltic basement consists of a pillow and massive basalts (Figure 7a). The carbonates comprise locally fossiliferous massive/micritic limestone (Figure 7c). The slope facies consist of basaltic and limestone breccias. They have similar characteristics to the well-described oceanic island/seamount associations worldwide [112].
Geochemically, the basalts are mainly characterized by low SiO 2 , intermediate MgO, and high TiO 2 and are representative of the tholeiitic series. The TiO 2 contents are similar to those of OIBs (=2.0 wt.%) [126]. On chondrite-normalized REE patterns ( Figure 8g) these samples exhibit enrichment in LREEs relative to HREEs with REE patterns similar to the OIB reference line. They also show enrichment in LILEs, Ti, Nb, and Ta in primitive mantlenormalized trace element spider diagrams, further suggesting OIB affinities (Figure 8h). On a discrimination diagram for tectonic settings (Figure 9a), all samples plot in the within-plate-basalt (WPB) field and show a similar affinity to OIB. Petrogenesis implies that they are the products of low-degree partial melting of lherzolite in the asthenospheric mantle [110,121,127]. Some researchers consider these basalts to have formed during the Carboniferous-Permian based on stratal relationships and whole-rock Rb-Sr age data (340 ± 11 Ma) [3,121].
Regionally, some researchers have reported other types of seamounts in the Animaqen and Bayan Har areas [109,128]. They consist of MORB basalt basement overlain by thick limestone (Figure 7d). These paleo-seamounts are considered to have formed in an area proximal to an uplifted mid-ocean ridge [14], which lay above the carbonate compensation depth (CCD). In the Southern Haerguole area, a paleo-seamount includes a suite of MORB, OIB, argillite, and massive/brecciated limestone from base to top (Figure 7d). This sequence formed in response at first to N-MORB-type magma extrusion near a mid-ocean ridge and then to superimposition of OIB-type magma followed by deposition of limestone [14,120,121].

Magmatic and Sedimentary Records of Subduction of the Buqingshan Ocean
The northward subduction of the Buqingshan Ocean led to the development of an extensive W-E-trending continental magmatic arc (Burhan Budai arc), forearc basin (Hongshuichuan Basin), accretionary complex (Buqingshan AC) (Figures 2a and 5), and an immature back-arc basin during Late Permian to Middle Triassic times. We collected some geochemical analyses from the EKO in order to characterize the nature of continental arc magmatism and sedimentation within the forearc basin.

Continental Arc Magmatism
The 275-240 Ma Burhan Budai arc is mostly located in the NKT, with subordinate exposures in the SKT (Figure 2). Rocks associated with this arc crop out in the E-W direction with a linear distribution pattern (Figure 3), similar to the Gangdese magmatic arc in Tibet [129] and the Andean magmatic arc of South America [130,131]. They intruded into Precambrian metamorphic rocks and pre-Devonian granitoids (Figure 10a). The magmatism shows a large compositional range comprising granodiorites, granites, monzogranites, dark-colored microgranular enclaves (Figure 10b), and intermediate-felsic volcanics. Geochemically, these rocks are characterized by relatively high SiO 2 , Na 2 O, low MgO, and TiO 2 and are classified as high-K calc-alkaline metaluminous I-type granitoids. On the trace element spidergram (Figure 11), they are characterized by enrichment in LILEs (Cs, Rb, Ba, etc.), and depletion in HFSEs (e.g., Nb, Ta, Ti, etc.), similar to subduction-related arc rocks. On several discrimination diagrams for tectonic settings (Figure 12), these rocks mostly plot within the volcanic arc granite (VAG) field.

Magmatic and Sedimentary Records of Subduction of the Buqingshan Ocean
The northward subduction of the Buqingshan Ocean led to the development of an extensive W-E-trending continental magmatic arc (Burhan Budai arc), forearc basin (Hongshuichuan Basin), accretionary complex (Buqingshan AC) (Figures 2a and 5), and an immature back-arc basin during Late Permian to Middle Triassic times. We collected some geochemical analyses from the EKO in order to characterize the nature of continental arc magmatism and sedimentation within the forearc basin.

Continental Arc Magmatism
The 275-240 Ma Burhan Budai arc is mostly located in the NKT, with subordinate exposures in the SKT (Figure 2). Rocks associated with this arc crop out in the E-W direction with a linear distribution pattern (Figure 3), similar to the Gangdese magmatic arc in Tibet [129] and the Andean magmatic arc of South America [130,131]. They intruded into Precambrian metamorphic rocks and pre-Devonian granitoids (Figure 10a). The magmatism shows a large compositional range comprising granodiorites, granites, monzogranites, dark-colored microgranular enclaves (Figure 10b), and intermediate-felsic volcanics. Geochemically, these rocks are characterized by relatively high SiO2, Na2O, low MgO, and TiO2 and are classified as high-K calc-alkaline metaluminous I-type granitoids. On the trace element spidergram (Figure 11), they are characterized by enrichment in LILEs (Cs, Rb, Ba, etc.), and depletion in HFSEs (e.g., Nb, Ta, Ti, etc.), similar to subduction-related arc rocks. On several discrimination diagrams for tectonic settings (Figure 12), these rocks mostly plot within the volcanic arc granite (VAG) field.     Voluminous contemporaneous intermediate and mafic dike swarms also developed within the aforementioned granitoids (Figure 10c). Compositionally, the dikes are mainly porphyritic diabases, lamprophyres, and diorite porphyries. Detailed mineralogical and geochemical studies showed that mafic dikes were derived from an enriched mantle (EM2type mantle), and intermediate dikes were the result of mixing between mafic and felsic magmas above the subduction zone [136]. Regarding the mechanism of their formation, it is suggested that mafic magmas may have first been generated by the partial melting of the enriched subcontinental lithospheric mantle (SCLM) due to the addition of subduction zone-derived fluids above the northward-subducting plate [136]. These mafic magmas underplated the overlying lower crust and led to partial melting to form felsic magmas. The two distinct types of magma mingled extensively to produce the "mixed magmas" with consistent negative ε Nd (t) and ε Hf (t) isotopic values (Figures 10b and 13) [46,49,64,137,138]. The mafic microgranular enclaves (MMEs) and their host magma were then emplaced at a depth of~12 km, where they crystallized at temperatures of ca.~700-770 • C [28].
Voluminous contemporaneous intermediate and mafic dike swarms also developed within the aforementioned granitoids (Figure 10c). Compositionally, the dikes are mainly porphyritic diabases, lamprophyres, and diorite porphyries. Detailed mineralogical and geochemical studies showed that mafic dikes were derived from an enriched mantle (EM2-type mantle), and intermediate dikes were the result of mixing between mafic and felsic magmas above the subduction zone [136]. Regarding the mechanism of their formation, it is suggested that mafic magmas may have first been generated by the partial melting of the enriched subcontinental lithospheric mantle (SCLM) due to the addition of subduction zone-derived fluids above the northward-subducting plate [136]. These mafic magmas underplated the overlying lower crust and led to partial melting to form felsic magmas. The two distinct types of magma mingled extensively to produce the "mixed magmas" with consistent negative εNd(t) and εHf(t) isotopic values (Figures 10b and 13) [46,49,64,137,138]. The mafic microgranular enclaves (MMEs) and their host magma were then emplaced at a depth of ~12 km, where they crystallized at temperatures of ca. ~700-770 °C [28]. Recently, Zhao et al. [80] reported 266 Ma tholeiitic gabbros from the central part of the Burhan Budai arc (i.e., the Kengdenongshe area). Based on their REE signature, the gabbros are thought to have formed in a back-arc basin. However, no true oceanic relicts of the Late Permian-Early Triassic back-arc basin are known from the EKO. Thus, we suggest that these dike swarms probably represent a localized extensional setting within a continental magmatic arc or an immature back-arc basin geodynamically related to the rollback of the subducting slab.

Sedimentary Successions
The Hongshuichuan forearc basin includes the Upper Permian Dazaohuo/Gequ, Lower Triassic Hongshuichuan, and Middle Triassic Naocangjiangou formations from base to top (Figures 3 and 14).  (Ma) and ε Nd (t), and (b) zircon U-Pb age data histograms and probability density curves for the Late Paleozoic-Early Mesozoic magmatic rocks. The values of ε Nd (t) from Yu et al. [22]. Age histograms are from Li [139].
Recently, Zhao et al. [80] reported 266 Ma tholeiitic gabbros from the central part of the Burhan Budai arc (i.e., the Kengdenongshe area). Based on their REE signature, the gabbros are thought to have formed in a back-arc basin. However, no true oceanic relicts of the Late Permian-Early Triassic back-arc basin are known from the EKO. Thus, we suggest that these dike swarms probably represent a localized extensional setting within a continental magmatic arc or an immature back-arc basin geodynamically related to the rollback of the subducting slab.

Sedimentary Successions
The Hongshuichuan forearc basin includes the Upper Permian Dazaohuo/Gequ, Lower Triassic Hongshuichuan, and Middle Triassic Naocangjiangou formations from base to top (Figures 3 and 14).
Geological field mapping shows that the Dazaohuo Formation occurs in the Western NKT and consists of intermediate-felsic volcanic rocks with continental arc affinities [91]. The Gequ Formation unconformably overlies the Middle Lower Permian Maerzheng Formation and is characterized by conglomerates, sandstones, and siltstones in the lower part and limestones in the upper part [39]. It was probably deposited in an initial filling stage of the forearc basin or during the transition from a passive to an active continental margin. Geological field mapping shows that the Dazaohuo Formation occurs in the Western NKT and consists of intermediate-felsic volcanic rocks with continental arc affinities [91]. The Gequ Formation unconformably overlies the Middle Lower Permian Maerzheng Formation and is characterized by conglomerates, sandstones, and siltstones in the lower part and limestones in the upper part [39]. It was probably deposited in an initial filling stage of the forearc basin or during the transition from a passive to an active continental margin.
The Hongshuichuan Formation can be subdivided into four units from base to top based on distinct rock associations and sedimentary structures. The first unit is characterized by red and gray-green polymictic conglomerates, sandstones, and minor tuffaceous siltstones generally with cross-bedded structures (Figure 15a,b), indicating a fan-delta environment [139]. The conglomerates are matrix-to clast-supported and composed of predominantly granite, metamorphic, and sandstone clasts with minor rhyolite, limestone, and silicic rock clasts (Figures 15b and 16). They have an average total quartz-feldsparlithic fragment ratio of Q59:F32:L10 ( Figure 16) [62]. The second unit is composed of gray sandstones intercalated with minor gray-black thin limestones and felsic volcanics possibly deposited in an agitated shallow marine environment (Figure 15e). The average total quartz-feldspar-lithic fragment ratio of the sandstones is Q40:F31:L28 [62], showing a gradual increase in feldspar and lithic fragments relative to the first unit. Beds in the third unit exhibit characteristic Bouma sequences and include a succession of thin black mudstones, siltstones, and tuffaceous sandstones interbedded with minor fine-grained conglomerates (Figure 15c). Together with typical sedimentary structures (e.g., Bouma sequences, graded bedding, convolute bedding, and load casts) (Figure 15d), these features suggest that the third unit was deposited by turbidity currents in a submarine fan environment. The average total quartz-feldspar-lithic fragment ratio is Q39:F36:L25 ( Figure  16) [62]. These sandstones are moderately sorted with angular-subangular grains, which The Hongshuichuan Formation can be subdivided into four units from base to top based on distinct rock associations and sedimentary structures. The first unit is characterized by red and gray-green polymictic conglomerates, sandstones, and minor tuffaceous siltstones generally with cross-bedded structures (Figure 15a,b), indicating a fan-delta environment [139]. The conglomerates are matrix-to clast-supported and composed of predominantly granite, metamorphic, and sandstone clasts with minor rhyolite, limestone, and silicic rock clasts (Figures 15b and 16). They have an average total quartz-feldsparlithic fragment ratio of Q59:F32:L10 ( Figure 16) [62]. The second unit is composed of gray sandstones intercalated with minor gray-black thin limestones and felsic volcanics possibly deposited in an agitated shallow marine environment (Figure 15e). The average total quartz-feldspar-lithic fragment ratio of the sandstones is Q40:F31:L28 [62], showing a gradual increase in feldspar and lithic fragments relative to the first unit. Beds in the third unit exhibit characteristic Bouma sequences and include a succession of thin black mudstones, siltstones, and tuffaceous sandstones interbedded with minor fine-grained conglomerates (Figure 15c). Together with typical sedimentary structures (e.g., Bouma sequences, graded bedding, convolute bedding, and load casts) (Figure 15d), these features suggest that the third unit was deposited by turbidity currents in a submarine fan environment. The average total quartz-feldspar-lithic fragment ratio is Q39:F36:L25 ( Figure 16) [62]. These sandstones are moderately sorted with angular-subangular grains, which indicates immaturity characteristic of proximal and rapid deposition [139,140]. The fourth unit consists of gray thin fine-grained siliciclastic rocks locally interbedded with thin limestones and minor conglomerates, interpreted to have been deposited in a shallow marine environment.
The Naocangjiangou Formation conformably overlies the Hongshuichuan Formation and is characterized by gray mudstone, calcareous siltstone, and limestone associations (Figure 15f,g). In detail, the lower part of the Naocangjiangou Formation is composed of mudstone and calcareous siltstone interbedded with thin limestone and continental arc volcanics with zircon ages of 244 Ma [141]. In contrast, the upper part is dominated by limestone with minor siltstone generally developing horizontal bedding structures. These strata were mainly deposited in shallow marine environments (Figure 15g), representing the final filling of the forearc basin [139]. The average total quartz-feldspar-lithic fragment ratios from the lower and upper parts are Q53: F21: L26 and Q48: F25: L27, respectively [62], showing higher feldspar and lithic fragment contents and low mineral and compositional maturity, which points toward a proximal source. indicates immaturity characteristic of proximal and rapid deposition [139,140]. The fourth unit consists of gray thin fine-grained siliciclastic rocks locally interbedded with thin limestones and minor conglomerates, interpreted to have been deposited in a shallow marine environment.   [49,50]; Age data of Babaoshan and Naocangjiangou formations from Wu et al. [20]; data of Maerzheng Formation from Pei et al. [14]).
The Naocangjiangou Formation conformably overlies the Hongshuichuan Forma and is characterized by gray mudstone, calcareous siltstone, and limestone associat (Figure 15f,g). In detail, the lower part of the Naocangjiangou Formation is compose mudstone and calcareous siltstone interbedded with thin limestone and continental volcanics with zircon ages of 244 Ma [141]. In contrast, the upper part is dominated limestone with minor siltstone generally developing horizontal bedding structures. Th strata were mainly deposited in shallow marine environments (Figure 15g), represen the final filling of the forearc basin [139]. The average total quartz-feldspar-lithic f ment ratios from the lower and upper parts are Q53: F21: L26 and Q48: F25: L27, resp tively [62], showing higher feldspar and lithic fragment contents and low mineral compositional maturity, which points toward a proximal source.

Detrital Zircon Age Constraints on Sediment Provenance
Detrital zircon age spectra are commonly used to constrain both sediment pro nance and the tectonic setting where the basin developed. In general, a basin develo in a convergent setting has a high proportion of detrital zircons with ages close to the  [49,50]; Age data of Babaoshan and Naocangjiangou formations from Wu et al. [20]; Age data of Maerzheng Formation from Pei et al. [14]).

Detrital Zircon Age Constraints on Sediment Provenance
Detrital zircon age spectra are commonly used to constrain both sediment provenance and the tectonic setting where the basin developed. In general, a basin developed in a convergent setting has a high proportion of detrital zircons with ages close to the age of the sediment. A basin developed in an extensional setting is dominated by detrital zircon ages that are typically much older than the depositional age of a unit with some proportion of grains having ages within 150 Ma of the depositional age [142].
Numerous detrital zircon U-Pb ages chiefly from the Permian to Triassic strata were compiled in order to reveal any systematic variations in provenance and shifts in basin type following the classification of Cawoood et al. [142] (Figure 16). In order to characterize how sediment provenance and basin types change before/during a period of oceanic subduction, we also present a detrital zircon spectrum from a passive continental margin for comparison (i.e., Lower to Middle Permian Maerzheng Formation).
Sandstones from the Maerzheng Formation are dominated by Early Paleozoic age populations (peak age, ca. 421 Ma) and some Precambrian age populations (peak ages, ca. 862 Ma 1568 Ma, and 2732 Ma). This age distribution suggests a source exclusively from the pre-Devonian basement rocks in the EKO, including Early Paleozoic igneous rocks and Precambrian metamorphic basement rocks. This age spectrum shows similarity to that of detrital zircons from the extensional basins [142]. Pei et al. [143] argued that they were deposited on the passive continental margin basin related to the spreading of the northern branch of the Paleo-Tethys Ocean.
In contrast, the Upper Permian to Middle Triassic sandstones yield substantially lesser proportions of pre-Devonian ages and show a sharp increase in the Late Permian-Middle Triassic ages (ca. 277-244 Ma) representative of the well-known Burhan Budai continental magmatic arc in EKO [12,139,140]. In particular, the Middle Triassic Naocangjiangou Formation is characterized by more abundant Late Permian-Middle Triassic ages and minor pre-Devonian ages relative to those of the underlying strata (Hongshuichaun and Gequ formations), possibly implying more intense continental arc magmatism and progressive unroofing of the continental arc during the Middle Triassic, which in turn provided large volumes of detritus to the basin. Paleocurrent directions are predominantly SE and subordinately NW directed [144,145] indicating the derivation of detritus from the continental magmatic arc to the north and the Buqingshan AC to the south ( Figure 14). Accordingly, with detritus mainly sourced from the coeval magmatic arc, together with the paleocurrent directions and a location between the Buqingshan AC and Burhan Budai arc (Figures 14 and 17), this suggests a forearc basin setting for Upper Permian-Middle Triassic strata.
ize how sediment provenance and basin types change before/during a period of oceanic subduction, we also present a detrital zircon spectrum from a passive continental margin for comparison (i.e., Lower to Middle Permian Maerzheng Formation).
Sandstones from the Maerzheng Formation are dominated by Early Paleozoic age populations (peak age, ca. 421 Ma) and some Precambrian age populations (peak ages, ca. 862 Ma 1568 Ma, and 2732 Ma). This age distribution suggests a source exclusively from the pre-Devonian basement rocks in the EKO, including Early Paleozoic igneous rocks and Precambrian metamorphic basement rocks. This age spectrum shows similarity to that of detrital zircons from the extensional basins [142]. Pei et al. [143] argued that they were deposited on the passive continental margin basin related to the spreading of the northern branch of the Paleo-Tethys Ocean.
In contrast, the Upper Permian to Middle Triassic sandstones yield substantially lesser proportions of pre-Devonian ages and show a sharp increase in the Late Permian-Middle Triassic ages (ca. 277-244 Ma) representative of the well-known Burhan Budai continental magmatic arc in EKO [12,139,140]. In particular, the Middle Triassic Naocangjiangou Formation is characterized by more abundant Late Permian-Middle Triassic ages and minor pre-Devonian ages relative to those of the underlying strata (Hongshuichaun and Gequ formations), possibly implying more intense continental arc magmatism and progressive unroofing of the continental arc during the Middle Triassic, which in turn provided large volumes of detritus to the basin. Paleocurrent directions are predominantly SE and subordinately NW directed [144,145] indicating the derivation of detritus from the continental magmatic arc to the north and the Buqingshan AC to the south ( Figure 14). Accordingly, with detritus mainly sourced from the coeval magmatic arc, together with the paleocurrent directions and a location between the Buqingshan AC and Burhan Budai arc (Figures 14 and 17), this suggests a forearc basin setting for Upper Permian-Middle Triassic strata.

Magmatic and Sedimentary Records of Collisional Orogenesis
During the latest Middle Triassic, the closure of the Paleo-Tethys Ocean led to collisional orogenesis in the EKO and was accompanied by large volumes of collisional-type magmatic rocks and metallic mineral deposits.

Magmatic and Sedimentary Records of Collisional Orogenesis
During the latest Middle Triassic, the closure of the Paleo-Tethys Ocean led to collisional orogenesis in the EKO and was accompanied by large volumes of collisional-type magmatic rocks and metallic mineral deposits.

Collision-Related Magmatism
The ca.240-200 Ma collisional-type magmatic rocks are haphazardly scattered across the whole EKO and BT unlike the linear distribution of continental arc granites (Burhan Budai arc) (Figure 3). They mainly intrude Lower to Middle Triassic sedimentary strata and include granites, diorites, gabbros, and minor syenogranites in lithology. In addition, large volumes of Late Triassic rhyolites occur in the Xiangride-Boluositai area (Figure 10d).
Geochemistry indicates the presence of adakitic, A-type, and normal granitic rocks [47,48,147,148]. Adakitic granites are characterized by enrichments in LREE, particularly high Sr, low Y, and Yb contents, high Sr/Y (>40) and La/Yb ratios, and depletions in Nb, Ta, and Ti [133,149] (Figure 11c,d). No Eu anomalies are notable in the chondritenormalized REE patterns. On the Sr/Y vs. Y diagram, they predominantly plot in the field of adakitic rocks (Figure 12a), which are considered to be produced by partial melting of the thickened lower crust in syn-collisional and post-collisional tectonic environments [150] ( Figure 12c,d). Some researchers have reported ca. 227 Ma undeformed adakitic rocks in the Kekealong-Gerizhuotuo area [149] (Chen et al., 2013a), which constrains the time of regional crustal thickening. A-type granites have high SiO 2 and alkalis contents and high 10,000 * Ga/Al ratios, together with depletions in Sr, P, Eu, and Ti on the trace element spidergram, suggesting an affinity with A-type granites (Figure 12b). They predominantly plot in the post-collisional fields on the Y + Nb vs. Rb and Yb vs. Ta diagrams (Figure 12c,d).
This stage of magmatism can be further divided into two subgroups, namely, initial collisional/syn-collisional magmatism at ca. 240-230 Ma and post-collisional magmatism after ca. 230 Ma, based on distinct geochemical differences and a compilation of zircon ages ( Figure 13). The histogram reveals that syn-collisional magmatism was less extensive than post-collisional magmatism. This is interpreted to indicate that the compressional conditions in the syn-collisional orogeny stage were not conducive to the production of voluminous magmas [47,48,151]. In contrast, post-collisional magmatism flared up at ca. 230 Ma and generated large volumes of adakitic and A-type granites as well as some metallic mineral deposits [152,153]. This is interpreted to be geodynamically related to mantle upwelling due to the detachment of thickened lithosphere [47,48].

EKO Sedimentary Records
Available geologic data show the sedimentary environment in the East Kunlun Range experienced a transition from marine facies in the Middle Triassic Naocangjiangou Formation to continental facies in the upper Middle Triassic Xilikete and Upper Triassic Babaoshan formations. The Xilikete Formation unconformably overlies the marine Naocangjiangou Formation [39,139], starting with a suite of red-gray conglomerates and sublitharenites with minor siltstones, and continuing into a succession of quartz sandstones, siltstones locally interbedded with pebbly sandstones and rhyolites at higher levels, which are interpreted to have formed in an alluvial fan environment.
The Babaoshan Formation, unconformably overlying the Middle Triassic Naocangjiangou Formation and the Precambrian basement comprises three suites of distinct depositional associations from base to top ( Figure 16). The lower part is 284 to 533 m thick and characterized by thick pebbly subarkoses interbedded with minor conglomerates and siltstones. The middle part is up to 586 m thick and consists of thin, muddy siltstones and quartzose siltstones interlayered with minor fine-grained subarkoses. The upper part is >155 m thick and defined by fining-upward cyclical sequences of conglomerates, pebbly sandstones, fine-grained sandstones, and siltstones. Conglomerates are well-sorted with well-rounded clasts and basal erosion surfaces are locally developed. Sandstones are characterized by graded and trough cross-bedding. Siltstones show planar cross-bedding and horizontal bedding. These sedimentary features suggest deposition in a braided river system.
The detrital zircon U-Pb age spectra from the sandstones mentioned above suggest Late Triassic, Late Permian-Middle Triassic, and pre-Devonian EKO provenance ( Figure 16). Notably, detritus with ages of ca. 400-1000 Ma reappears in the Xilikete and Babaoshan formations suggesting a recycled pre-Devonian basement. This may relate to the extensive uplift and erosion of the pre-Devonian strata during Late Triassic collisional orogenesis. Moreover, the abrupt appearance of ca. 218 Ma peak ages in Upper Triassic strata suggests that Late Triassic collision-related magmatic rocks began to contribute some sedimentary debris. Accordingly, it is suggested that the Babaoshan Formation was deposited in a piggyback or foreland basin in response to the collision of the East Kunlun terrane to the north with the Qiangtang/Bayan Har terranes to the south [139].

Bayan Har Terrane Sedimentary Records
The Bayan Har Group, mainly located in the BT, consists of the Lower to Middle Triassic Gande Formation and Upper Triassic Qingshuihe Formation. They are characterized by thick medium-grained lithic arkoses and subarkoses interbedded with slates and were deposited in bathyal, abyssal, and neritic environments. According to paleocurrent indicators and detrital zircon age data [12,104], paleocurrents in the northern part of the Bayan Har basin flowed in a predominantly SE direction. The detrital zircon age spectrum features dominant Precambrian and Paleozoic age peaks, showing detritus was mainly sourced from East Kunlun and West Qinling orogens to the north. Zhang [104] argued that the lower part of the Bayan Har Group formed in a residual ocean basin. The middle to the upper part of this group was deposited in a peripheral foreland basin that developed in response to the collision of the Qiangtang terrane with the East Kunlun terrane.

Tectonic Evolution of the Late Paleozoic-Mesozoic Buqingshan Ocean
Data presented and summarized in this investigation indicate that the Buqingshan Ocean spread in the Carboniferous followed by subduction of associated oceanic lithosphere culminating in the collision of Qiangtang/Bayan Har with the East Kunlun terranes and associated orogenesis (Figure 18).  Red color with white cross shows continental arc magmatic rock, and blue color with white cross shows collisional-type magmatic rock.

Spreading of Buqingshan Ocean
Previous studies suggested that the development of the ocean in Kunlun can be subdivided into two stages: a Proto-Tethys from Late Neoproterozoic to Early Paleozoic time and a Paleo-Tethys from Late Paleozoic to Early Mesozoic time [12][13][14]20,23]. The two oceans are not temporally related, and consumption of the Proto-Tethys Ocean ultimately led to the formation of the pre-Devonian orogenic basement of the EKO [27,29,120]. Subsequently, the Paleo-Tethys Ocean gradually opened on the pre-Devonian orogenic basement of the EKO as early as the Devonian, although the opening timing and its transitional details from Proto-Tethys to Paleo-Tethys remain the subject of ongoing debate [4,[12][13][14]20,23,120].  Figure 4) [20,139,143]. In addition, there are few volcanic layers in the Carboniferous sequences in Eastern EKO. This further argues for a stable continental margin setting rather than a subduction-related setting in the Carboniferous.

Subduction of Buqingshan Ocean
During Late Permian to Middle Triassic time, the BO lithosphere was subducted beneath the EKT, leading to the development of Buqingshan AC, Burhan Budai continental arc magmatism, and forearc basin in EKO (Figure 18b). Two cross sections of Figure 6 across the Buqingshan AC showing top-to-the-south imbricated thrust faults and southvergent tight-isoclinal asymmetrical folds suggest a north-dipping oceanic subduction zone associated with northward subduction of the Buqingshan Ocean. With the oceanic basin subducting northwards, the ocean island basalt together with the limestone were scraped and then accreted into the Buqingshan accretionary complex. Continued accretionary processes and tectonic deformation were accompanied by extensive greenschist

Subduction of Buqingshan Ocean
During Late Permian to Middle Triassic time, the BO lithosphere was subducted beneath the EKT, leading to the development of Buqingshan AC, Burhan Budai continental arc magmatism, and forearc basin in EKO (Figure 18b). Two cross sections of Figure 6 across the Buqingshan AC showing top-to-the-south imbricated thrust faults and south-vergent tightisoclinal asymmetrical folds suggest a north-dipping oceanic subduction zone associated with northward subduction of the Buqingshan Ocean. With the oceanic basin subducting northwards, the ocean island basalt together with the limestone were scraped and then accreted into the Buqingshan accretionary complex. Continued accretionary processes and tectonic deformation were accompanied by extensive greenschist facies metamorphism, which is marked by mineral associations of chlorites, epidotes, and sericites.
Meanwhile, the Hongshuichuan forearc basin formed between the Burhan Budai magmatic arc and Buqingshan AC (Figures 14, 17 and 18b). Detrital zircon age spectra clearly reveal that sediments of this basin were mainly sourced from the coeval continental magmatic arc to the north (Figures 14 and 16). This conclusion is further supported by the paleocurrent data of Yan et al. [144], which indicate sediment transportation predominantly to the SW. Liu [62] also reported that most sandstones from the lowermost part of the Hongshuichuan Formation plot within the "continental craton" provenance field of Dickinson [166], whereas the samples from the middle-upper part mainly plot within the "dissected arc" region, reflecting an upward increase in feldspar and lithic fragments and the contribution of detritus from the Burhan Budai magmatic arc.
In addition, south of the Paleo-Tethys Ocean, it likely diachronously subducted southward beneath the North Qiangtang terrane along the Jinshajiang tectonic zone. This is constrained by the occurrences of the Triassic Jinshajiang complex and island-arc granites along the northern margin of the North Qiangtang terrane [167][168][169]. We will not provide the details of the Jinshajiang tectonic zone as we mainly focus on the tectonics of EKO in this paper.

Syncollisional Stages of the BT with the Kunlun-Qaidam Terranes
Following the subduction and closure of the Buqingshan Ocean oblique collision of the Qiangtang terrane with the Kunlun-Qaidam terranes (KQT) occurred towards the end of the Middle Triassic (Figure 18c). This eventually led to the production of minor metaluminous-peraluminous granitoids, the emplacement of the Buqingshan AC, and the development of the Bayan Har peripheral foreland basin [61,170,171]. The closure of the Buqingshan Ocean is also marked by a regional angular unconformity between the Babaoshan Formation and the underlying marine successions [102,103]. This unconformity indicates that the northward subduction of the Paleo-Tethys Ocean lasted until the late Middle Triassic and that the collisional orogeny followed into the early Late Triassic. This collisional orogenesis produced the Kunlun and Qinling orogens in Central China (Figure 19b).
Regionally, the other branches (Jinsha, Central Qiangtang oceans, etc.), located on the SE Tibetan Plateau also closed, and eastern Cimmerian blocks collided to the north with the North Qiangtang/Bayan Har and South China blocks in the Late Triassic (Figure 19b) [157]. In a word, the closures of various branches of the Paleo-Tethys Ocean eventually led to the final formation of the East Asian continent during the Late Triassic ( Figure 19b) [13,32,156,172].

Post-Collisional Stage
In the Late Triassic, the EKO evolved into a post-collisional collapse stage and produced major magmatic pulses (Figure 18d). The rate at which magma was added during the Late Triassic is estimated to have reached 100 km 3 /m.y. [173,174], comparable to Late Mesozoic magmatic flare-up events from the central Sierra Nevada arc, California [175]. Tectono-magmatic events mainly include the generation of large volumes of adakitic granites and A-type granites, polymetallic mineral deposits, and MME-bearing granites, which are interpreted to be geodynamically related to asthenospheric mantle upwelling induced by delamination of thickened continental lithosphere and partial melting of the lower crust [47,130,176].
During the Early Jurassic, the EKO underwent rapid uplift and cooling as shown by zircon/apatite fission track data [177][178][179][180][181][182][183]. These events may have been induced by the unrooting of the over-thickened crust. The collapse of the over-thickened crust was accompanied by the generation of fault-bounded basins recorded by the Upper Triassic Babaoshan Formation (molasse deposits) and Lower Jurassic Yangqu Formation (coalbearing strata).

Conclusions
A detailed synthesis of the petrological, sedimentary, geochemical, and isotopic features of the Late Paleozoic-Early Mesozoic geologic records from the EKO and adjacent regions leads to the following conclusions: (1) The Buqingshan AC contains blocks of Carboniferous OIBs and MORBs, gabbros, depleted and refractory peridotites, and paleo-seamounts in a strongly deformed matrix of deep marine turbidites.  Ma) times. This led to the development of a regional angular unconformity between Upper Triassic terrigenous strata and underlying marine sediments.
(4) During the Late Triassic to Earliest Jurassic (ca. 230-200 Ma), the EKO evolved to a post-collisional stage that experienced magmatic flare-ups and metallic mineralization, which are interpreted to likely occur in geodynamic response to detachment of thickened lithosphere and subsequent upwelling of asthenosphere mantle.