Metasediments Covering Ophiolites in the HP Internal Belt of the Western Alps: Review of Tectono-Stratigraphic Successions and Constraints for the Alpine Evolution

: Ophiolites of the Alpine belt derive from the closure of the Mesozoic Tethys Ocean that was interposed between the palaeo-Europe and palaeo-Adria continental plates. The Alpine orogeny has intensely reworked the oceanic rocks into metaophiolites with various metamorphic imprints. In the Western Alps, metaophiolites and continental-derived units are distributed within two paired bands: An inner band where Alpine subduction-related high-pressure (HP) metamorphism is preserved, and an outer band where blueschist to greenschist facies recrystallisation due to the decompression path prevails. The metaophiolites of the inner band are hugely important not just because they provide records of the prograde tectonic and metamorphic evolution of the Western Alps, but also because they retain the signature of the intra-oceanic tectono-sedimentary evolution. Lithostratigraphic and petrographic criteria applied to metasediments associated with HP metaophiolites reveal the occurrence of distinct tectono-stratigraphic successions including quartzites with marbles, chaotic rock units, and layered calc schists. These successions, although sliced, deformed, and superposed in complex ways during the orogenic stage, preserve remnants of their primary depositional setting constraining the pre-orogenic evolution of the Jurassic Tethys Ocean.


Introduction
Ophiolites are a major component of the Alpine-Himalayan orogenic belt [1][2][3] (Figure 1A). They represent tectonic slices deriving from the oceanic lithosphere of the Jurassic Tethys Ocean and have thus been named Tethyan ophiolites [4,5]). Differently from other well known ophiolites of the Mediterranean area, such as the Troodos ophiolite in Cyprus [6,7], the metaophiolites of the Alpine belt have been intensely deformed and metamorphosed; they presently occur as tectonic slivers pinched between the palaeo-Europe and palaeo-Adria continental domains [8][9][10]. The Alpine orogenic cycle has deeply reworked the original characters of the primary oceanic lithosphere. Consequently, the internal structural and stratigraphic features of the Alpine metaophiolites are not comparable with those of the idealized ophiolite suite defined by the Penrose conference [5,11]. The Alpine metaophiolites are mostly composed of (now serpentinized) mantle peridotites (mainly harzburgites and minor lherzolite and few dunite) with mafic intrusions and ophicarbonates. A true sheeted dyke complex has never been documented, and metalavas occur in a low percentage. Furthermore, the original thickness of the Jurassic oceanic lithosphere has been strongly modified by the Alpine tectonics. The Alpine metaophiolites are then finally associated with different types of metasediments, only partially comparable with those of less deformed and metamorphosed ophiolites [12]. In the Western Alps, the metaophiolite sequences have been distinguished on the basis of their internal structural features, rock association, and metamorphic imprint [12][13][14][15][16]. At a broad scale, metaophiolites are arranged within a relatively simple array: An internal, eclogite facies belt and an external blueschist facies belt [16] ( Figure 1B). We focus our study on the eclogite facies belt, and particularly on the metaophiolites exposed in the Aosta Valley and in the Monviso Complex because, due to their weak re-equilibration during the Alpine decompression path, they preserve textural records of the pre-orogenic evolution and of the original geological setting. In this context, we concentrated our investigations on metasediments covering the metaophiolites, with particular attention to their pseudostratigraphic sequence and petrographic features. Since the inception of geological surveys in the Alps in the 19th century, little attention has been generally paid to metasedimentary rocks. Indeed, through selected key sections from different areas of the Western Alps, we demonstrate that distinct occurrences of coupled metaophiolite and metasedimentary sequences are helpful clues for interpreting the evolution of the Jurassic Tethys, their location in the ocean, and involvement in the Alpine orogeny.
Our contribution is aimed at stimulating a discussion on the tectonic settings of the metasedimentary sequences, their relation with the ophiolitic basement, and with the continental slices derived from the palaeo-Europe and palaeo-Adria continental plates involved in the subduction, in order to reconstruct the possible palaeogeographic scenarios.

The Alps
The Alps are a mountain belt generated by subduction of the Jurassic Tethys Ocean that occurred in the Cretaceous-Eocene time and subsequent collision between the palaeo-Adria and palaeo-European passive continental margins [17][18][19]. The Tethyan oceanic lithosphere gave rise to the Alpine metaophiolites, while the Adria and Europe domains gave rise to the Austroalpine-Southalpine and Penninic-Helvetic continental systems, respectively [18,20,21]. More in detail, the Alpine metaophiolites are the remains of two main branches of the Tethys Ocean, i.e., the Ligurian-Piedmont Ocean and the Valais Ocean, that opened from the Jurassic to the Cretaceous [19,22]. These two branches are commonly referred to as Alpine Tethys [23,24]. The Ligurian-Piedmont Ocean opened between the Briançonnais microcontinent and the Adria palaeo-margin [25]. Its suture gave rise to the Alpine metaophiolites that are mostly exposed in the inner and axial sectors of the Alps. The Valais Ocean opened along the border between the European paleaomargin and the Briançonnais microcontinent [26]. The corresponding Valais units with metaophiolites represent a more external belt that sutured the Briançonnais microcontinent with Europe [22]. The Alpine metaophiolites are frequently imbricated with continentalderived tectonic units, ranging in size from a few kilometers to tens of kilometers (see Figure 1), resulting in the Alpine orogenic wedge [9]. Some of these units exhibit records of the original stratigraphic setting; others are completely dismembered or make tectonic mélanges, such as those occurring in the Central Alps [27].
Subduction processes are attested in the Alps by the occurrence of high-pressure (HP) and ultrahigh-pressure (UHP) mineral assemblages mostly associated with ductile structures particularly concentrated in the Western Alps [16,[28][29][30][31][32][33][34]. The eclogite facies tectonic units make a more or less continuous belt in the inner (easternmost) parts of the Western Alps, marking the approximate location of the palaeo-subduction zone ( Figure 1B). In more external areas of the Western Alps, blueschist facies metamorphic conditions have been documented in the Queyras Schistes Lustrés [16,35,36], while HP greenschists facies metamorphism is recorded in the Briançonnais zone [37] at the front of the belt, attesting to a general increase of the Alpine P-T conditions from the external (westernmost) to the internal (easternmost) sectors of the Western Alps [16,38,39].
The subduction, collision, and exhumation are differently recorded along the entire Alpine belt. As an example, in the Western Alps, subduction was followed by exhumation along a relatively cool path, while in the Central Alps, the decompressional path was ac-companied by heating giving rise to a pervasive recrystallisation of rocks under prominent amphibolite facies metamorphic conditions [40,41]. As a result, Alpine rocks variously preserve records of their entire tectono-sedimentary and tectono-metamorphic evolution.
Ages of metamorphism are not homogenous in the Alps. In the northwestern Alps, as in the Aosta Valley for example, the high-pressure metamorphic peaks are comparable among different tectonic units located to the south of the Aosta-Ranzola Line (ARL; Figures 1 and 2), ranging between 49-40 Ma in the Austroalpine klippen and between 45-42 Ma in metaophiolites [42], and around 42 Ma in the Penninic Gran Paradiso units [43]. Comparable ages of the eclogite facies metamorphism are recorded in the Valais units (ca. 42-40 Ma ago) [22]. However, all these ages differ from those revealed by metaophiolites located to the north of the ARL (e.g., 65 Ma in the Valtournenche area) [44] or in the Austroalpine Sesia Lanzo Zone (e.g., 79-65 Ma) [45]. These data clearly suggest that the subducted units in this region of the Western Alps attained their maximum P-T imprint diachronously. Exhumation of the subducted metaophiolites of the Western Alps occurred in a shorter time span, ranging between ca. 42 and 36 Ma [46][47][48][49]. The Alpine belt is truncated by the Insubric Line ( Figure 1B), a roughly E-W trending fault system, which separates the northern tectonic units, deeply involved in the Alpine orogeny and deformed by N-vergent thrust, from the Southern Alps composed of dominant sedimentary Mesozoic and Tertiary rocks and pre-Alpine metamorphic basement dislocated by S-vergent thrusts [50,51]. In the Western Alps, where the study areas of the present contribution are located, ophiolites and related sediments derive from the Ligurian-Piedmont Ocean (i.e., the "Piemonte Zone") [54], a composite nappe stack presently sandwiched between the Pennidic and Austroalpine continental domains [8,9,55,56]. The Piemonte Zone consists of two main tectonic units: The eclogite facies (HP to UHP) Zermatt-Saas unit and the low-grade (mostly greenschist facies with blueschist facies relics) Combin unit; they were defined in Switzerland [57] and then extended to other sectors of the Western Alps, namely the Aosta Valley region [12][13][14][58][59][60][61]. The Zermatt-Saas metaophiolites extend southwards along the inner arc of the Western Alps (Figure 1), where they constitute other eclogite facies metaophiolites such as the Monviso Complex [12,62,63], the Rocciavrè metaophiolite [64], and the Voltri Group [65]. The Combin unit extends to the south in the Queyras area ( Figure 1) [66,67] constituting the external blueschist facies belt of the Western Alps ( Figure 1B). Finally, the eclogite facies metaophiolites of the Valaisan Ocean are exposed in the outermost sectors of the Western Alps ( Figure 1B).

The Aosta Valley
Located in the northwestern part of the Alpine belt (Figure 2), the Aosta Valley represents a natural geotraverse through the Alpine orogenic wedge, from the innermost continental units of the Sesia-Lanzo Zone to the oceanic units of the Piemonte Zone until the continental Penninic and Helvetic units.
In the southern Aosta Valley, to the south of the ARL where some of our study areas are located (Figure 2), the metaophiolites are dominated by mantle-derived (now serpentinized) peridotites intruded by gabbro and rodingitized gabbro dykes, and minor mafic rocks, metatrondhjemite, and metasediments comprising quartzite (probably from radiolarite), marble, and calc schists [68][69][70][71][72][73]. These metaophiolites are mostly comparable to the Zermatt-Saas unit, showing a dominant early Alpine subduction-related metamorphic imprint under eclogite facies conditions, variously retrogressed under greenschists facies conditions [42,69,[74][75][76][77][78]. More recently, the metaophiolites exposed in the southern Aosta Valley have been subdivided into several tectonic units, according to their rock assemblage and dominant metamorphic imprint related to the Alpine orogenesis [79]: Among these, there are the Zermatt-Saas and Grivola-Urtier units, that were metamorphosed under eclogite facies conditions; the Combin and Aouilletta units, characterized by calc schists and minor amounts of ophiolites showing prevalent greenschist facies mineral assemblages; and the Cogne units, interpreted as continental cover sequences but included in the Piemonte Zone. The metaophiolites of the southern Aosta Valley are thrust over the northern end of the Pennidic Gran Paradiso massif and in turn overthrust by slices (or klippen) of Austroalpine continental crust (i.e., the Mount Emilius, Glacier-Rafray, Tour Ponton, and Acque Rosse tectonic units [42,80,81] (Figure 2), that show a comparable Alpine metamorphic evolution.

The Metaophiolite Monviso Complex
Located in the southwestern part of the Alpine belt ( Figure 1B), the Monviso corresponds to an area wherein one of the major and better investigated eclogitized remnants of the Ligurian-Piedmont oceanic lithosphere in the Western Alps (i.e., the metaophiolite Monviso Complex) is exposed. The Monviso Complex is tectonically interposed between the continental Dora Maira crystalline Massif and the Queyras Schistes Lustrés Complex, to the East and West, respectively [61,62]. The Dora Maira Massif represents a slab of the paleo-European margin, which consists of various tectonic units, differing from each other for their lithostratigraphic features, Alpine metamorphic P-T peaks (from blueschistto eclogite-coesite facies), and structural position [82][83][84][85][86][87]. The Queyras Schistes Lustrés Complex, which is separated from the Monviso Complex along a major ductile fault [88,89], represents the external part of the Alpine accretionary wedge [90] ( Figure 1B). It consists of carbonate-rich metasedimentary succession with metaophiolite bodies [67,91], which were metamorphosed under blueschist facies conditions during the late Cretaceous-early Eocene subduction of the Ligurian-Piedmont Ocean [92,93] and pervasively deformed during Alpine tectonics [36].
The structure of the Monviso Complex, which consists of several tectonically juxtaposed units [62,63,[94][95][96], resulted from three main tectonic stages developed during (i) the Late Cretaceous to Middle Eocene subduction, (ii) the Late Eocene-Early Oligocene collision and W-verging accretion, and (iii) the Late Oligocene to Neogene westward tilting, which was driven by crust and mantle indentation and doming of the Dora Maira Massif [97,98]. The partially preserved subduction-related mineral assemblages constrain the P-T peak metamorphic conditions roughly at 2.5 GPa-550 • C [96,99,100].
The metaophiolite sequence of the Monviso Complex consists of serpentinite, metagabbro, metabasalt, and metasedimentary rocks [62]. The original upper mantle peridotite was intruded during Late Jurassic by gabbro (163 ± 2 Ma in age) [101] and quartz-diorite (152 ± 2 Ma) [102]. An association of talc-chlorite and serpentine schists with blocks of metagabbro occurs throughout the Monviso Complex, and it has been interpreted as a remnant of intra-oceanic detachment faulting (i.e., the "Baracun Shear Zone" of Festa et al. [103]) ( Figure 3). The Baracun Shear Zone separates serpentinite and metagabbros in its footwall from metabasalt and metasediments in its hanging wall. The metabasalt includes pillow metalavas and volcanic metabreccia. The metasediments derive from two different successions, which have been referred to as a Late Jurassic syn-extensional succession and a Cretaceous post-extensional one [52]; extension is related to the Late Jurassic spreading resulting in the formation of the Ligurian-Piedmont oceanic basin (see below).

Methods
The most significant results from selected metaophiolite and metasedimentary successions of the Western Alps are reviewed. These data are implemented with new original data obtained on metasedimentary successions by field mapping at various scales (from 1:10,000 to 1:500). Tens of thin sections were then selected for petrographic descriptions under optical microscope (Zeiss Axioscope polarizing transmitted light; Zeiss, Jena, Germany) for documenting the main HP mineral assemblages. The aim is to synthesize the most representative examples of metasedimentary successions associated to metaophiolites, and to reconstruct their pseudostratigraphic features for inferring possible scenarios of the original geological setting.

Ophiolitic Metasediments across the Southern Aosta Valley Region
Our study areas are located in the southern sector of the Aosta Valley region (see Figure 2). The metaophiolite structural position is between the underlying Upper Penninic Gran Paradiso nappe and the overlying Austroalpine klippen. We focus our investigation on the metasedimentary tectono-stratigraphic successions covering the metaophiolites of the St. Marcel valley and the Cogne-Urtier valley-Champorcher area (see Figure 2). Two main types of those successions are recognizable. The first type comprises quartzite (probably from radiolarite), marble, and calc schists [68,69,104,105]. These metasediments directly cover the ophiolitic metabasalts or metagabbro, often associated with manganeseor sulphide-ore deposits. The second succession type consists of ophicarbonate breccias or mixed mafic-ultramafic breccias, which directly lie upon serpentinized mantle peridotites, followed by calc schists with (scarce) ophiolitic interbeds [106,107]. A few case studies were selected as being the most significant and representative of distinct metaophiolite suites with associated metasediments, as described below.

The St. Marcel Valley Section
The St. Marcel valley is a right tributary of the Aosta valley, it is north-south oriented, and extends for about 8 km in length (see Figure 2). In the St. Marcel valley, the metaophiolite basement is almost unique, being composed of crustal lithologies of the oceanic lithosphere, and not of mantle serpentinites as in most sectors of the Aosta valley. Metaophiolites consist of eclogite facies Fe-Ti-and Mg-metagabbros, metabasalts represented by glaucophanites with garnet and lawsonite (now pseudomorphed) and enclosing eclogite boudins, garnet-chloritoid-glaucophane-chlorite-bearing schists, and minor talc schists [69,104,105,108]. These rocks include a well-known Cu-Fe sulfide mining district and a Mn-rich deposit interpreted as palaeo-hyrothermal fields referable to the Jurassic oceanic environment [108][109][110].
Metasediments occur on both sides of the St. Marcel valley; their thickness, although falsified by multiple folding, ranges from a few meters up to 800 m going from the north to the south along the valley. The metasediments are always floored by metabasalt or metagabbro, partially retrogressed under greenschist facies conditions and often enclosing eclogite boudins, whilst a stratigraphic contact with serpentinite has never been observed. The contact between metaophiolite and metasediments is commonly sharp and marked by actinolite schists, with scarce repetition of metaophiolite layers within metasediments.

The Cogne-Urtier Valley Sections
The Cogne valley is right tributary of the Aosta valley and extends for about 32 km in length. It is southeast-northwest oriented in its upper segment (named Urtier valley) and mid segment (named Grand'Eyvia valley), becoming north-south oriented in the lower segment, towards the confluence with the main stream of the Aosta valley, i.e., the Dora Baltea river (see Figure 2).
The tectono-metamorphic setting of the Cogne area is complicated by the presence of different tectonic units of both continental and oceanic origin, locally intensely deformed and transposed together. They include the Middle and Upper Penninic continental basement units (i.e., the San Bernardo and Gran Paradiso Nappes, respectively; Figure 2) with their own metasedimentary covers, closely set one upon the other, and the oceanic metaophiolites of the Piemonte Zone. The metaophiolites are exposed all along the northern border of the Gran Paradiso massif and extend to the North (i.e., towards the St. Marcel valley) and to the East, along the Urtier valley. They are tectonically overthrust upon all the Penninic basement and cover units and are in turn covered by hectometer-to kilometer-scale Austroalpine tectonic slices, such as the Mount Emilius and Tour Ponton units presently occurring as klippen because of the erosion of the uppermost metaophiolites. Other minor Austroalpine slices are pinched within the metaophiolites in the highest Urtier valley, near the border with the Champorcher valley [81,113].

Metaophiolites and related metasedimentary rocks of the Cogne-Urtier valley area show different features in the northern and southern sectors.
In the northern sector, near the Corona lakes and towards the orogenic divide with the St. Marcel valley, metaophiolites are mostly represented by mafic rocks associated to quartzites and calc schists (see also Figure 2, Cogne-Urtier valley North section). These latter are made of marble layers regularly alternating with micaceous layers; centimetersized lawsonite porphyroblasts now pseudomorphed by white mica + clinozoisite typically characterize these rocks ( Figure 6A) together with chloritoid ( Figure 7A). North of the Cogne village, metaophiolites include a kilometer-sized slice of serpentinite hosting the well-known Cogne magnetite mineralization, the biggest of the Alps [120][121][122][123][124] and some small-sized Cu-Fe sulphide stockworks. Recent works by Toffolo et al. [124] have shown the hydrothermal origin of this magnetite mineralization and the primary magmatic nature (troctolite composition) of the hosting serpentinite. U-Th-Pb dating of magnetite-associated uraninite constrains the formation of the deposit to Late Jurassic (ca. 150 Ma), during an advanced stage of the opening of the Tethys supporting a genetic affinity of this serpentinite with the Zermatt Saas metaophiolites hosting the Cu-Fe hydrothermal mineralizations of the St. Marcel valley.
The right side of the Urtier valley (see also Figure 2, Cogne-Urtier valley South section) is characterized by the occurrence of metadolostones, marble, metaconglomerates, and metasandstones (i.e., the "Faisceau de Cogne" unit, or "FDC") [125], easily recognizable in the field for their white-yellowish color ( Figure 6B-D). These metasedimentary rocks often show an evident compositional layering marked by carbonate-rich layers alternating with quartzite layers or calc-mica schists with quartz porphyroclasts ( Figure 7B). This layering can be attributed to the effect of pervasive isoclinal folding of D 1 -D 2 Alpine phases ( Figure 6C) and shearing, likely occurred under high-pressure metamorphic conditions, as suggested by petrographic features of carbonate-rich rocks ( Figure 7C,D). These metasedimentary carbonatic rocks are strongly sheared and tectonized, and mechanically mixed with serpentinites to form an assembly of tectonic slices about 300-500 m thick. This mixing can be recognized also at the micro-scale ( Figure S1). The FDC unit likely derives from sedimentary cover sequences of the Penninic domain. Moreover, not far away from the Urtier valley, in the Grand'Eyvia valley (lower part of the Cogne valley), similar carbonate-rich metasediments of Carboniferous to Liassic age are in stratigraphic contact with the Gran San Bernardo basement, and thus interpreted as the Gran San Bernardo original sedimentary cover (i.e., the so called "Ensemble A" of Elter [54]). Similarly, in the Valnontey and Valsavaranche valleys, the metasedimentary cover of Gran Paradiso is well recognizable, even if transposed with metagranites [126,127].
In the lower right side of the Urtier valley, a series of garnet-bearing calc schists and micaschists rich in quartz porphyroclasts or mm-cm thick layers ( Figure 6E) are in tectonic contact with the serpentinite slices and the underlying FDC unit and attributed to the Zermatt-Saas metaophiolite [79]. contact with the serpentinite slices and the underlying FDC unit and attributed to the Zermatt-Saas metaophiolite [79].   The Zermatt-Saas metaophiolites extensively crop out along the axial Urtier valley and within the sinistral tributary valleys (Valnontey, Valleille, Bardoney, and Vallon des Eaux Rousses valleys), up to the orogenic divide with the Champorcher valley, to the east. They constitute the so-called Grivola-Urtier unit [79,117] or the Lower Ophiolitic Unit [114], which overlays the Upper Penninic Gran Paradiso Nappe. Similarly to the northern side of the Urtier valley, the Zermatt-Saas metaophiolites exposed in the southern side (Valnontey valley) are interlayered with carbonatic rocks of the Penninic covers. Here, metaophiolites were in fact transposed under high-pressure conditions with dolostones and limestones of the Penninic covers, as suggested by the occurrence of lawsonite pseudomorph in calc schists (for example, at the Loie lake, P. ta Fenilia, Loson Pass, "the Tuf "peak, Trajo Pass) [118]. However, along the southern side of the Urtier valley and its lateral valleys, the metaophiolites mostly exhibit a tectonic setting, which differ from that recognized in the opposite side and in the St. Marcel valley, for showing a chaotic arrangement with blocks and/or slices of various size and composition, similar to a mélange. The largest ophiolitic slices, up to hundreds of meters wide, consist of serpentinite including chlorite-schist layers (probably representing original dykes) which envelop huge (hectometer scale) gabbro intrusions or mega-boudins (e.g., the Pointe Noire Fe-Ti metagabbro). More fine-grained material is represented by dm-to cm-sized mafic or ultramafic blocks and clasts embedded in a carbonate matrix [116,117]. These metabreccias may be tectonically transposed with calc schists (e.g., Eaus-Rousses valley; Figure 6F), serpentinite (e.g., Loie lake), or metagabbro (e.g., near Champlong). A direct and sharp contact between the ophiolitic basement and its metasedimentary cover is only locally well preserved in this sector of the Cogne area [116], such as near the Broillot alm or at Mt. Poucet, where some huge (hundreds of meters thick) eclogitic metabasalts or partly retrogressed metabasites are in contact with thick micaceous calschists. Near the Goilles Dessous bridge, Mn-garnet-quartzite grading to micaschists and calc schists are in direct contact with metabasite ( Figures 6G,H and 7G,H); however, also in this latter case, quartzites in contact with metabasite include cm-thick layers or clasts of clinopyroxene-rich mafic rock (see Figure 6G,H).
This mélange-like rock assemblage exposed along the southern side of the Urtier valley suffered a tectonic evolution common with that of the underlying Gran Paradiso Nappe dominated by a regional-scale high-pressure foliation marked, in the metaophiolites, by glaucophane, garnet, and omphacite [116,117,129] and a heterogeneous retrogression under blueschist-greenschists facies conditions. Metasediments the eclogite facies imprint is documented by phengite, garnet, and (now pseudomorphed) lawsonite [117].

The Miserin Lake Section
This study area is located in the southern sector of the Aosta valley (see location in Figure 2) and is mainly exposed in the high Champorcher valley, near lake Miserin. The Miserin lake metaophiolites consist of serpentinite + veined serpentinite overlain by a composite chaotic rock unit [107,130]. A calc schist unit directly overlies the chaotic rock unit or, where this latter is absent, the serpentinite basement. The contact between serpentinite or veined serpentinite and the chaotic unit is underlined by a more or less continuous layer, centimeters-to meters-thick, consisting of amphibole + carbonates-rich metasomatic rocks [131]. Serpentinites occur as thin slices of foliated rocks consisting of antigorite and oxides (Cr-Ni-rich magnetite, ilmenite, chromite). These rocks can be correlated with serpentinites of the nearby Mount Avic massif, which include, in addition to antigorite and oxides, Ti-clinohumite, relict augite, and diopside [71,73]. Serpentinites often grade towards veined serpentinites characterized by sets of veins 1-2 cm thick filled with carbonates, antigorite, or talc ( Figure 8A). The veined serpentinite (or ophicarbonate) is overlain by a wedge-shaped composite chaotic unit, with a ca. 40 m maximum thickness, which represents the Alpine tectonic reworking and boudinage of primary mass transport deposits with a block-in-matrix arrangement and coarse-grained ultramafic sandstone alternating with marble layers. The block-in-matrix arrangement mainly consists of clastsupported metabreccias ("BrFm1" and "BrFm2" of Tartarotti et al. [107] ( Figure S1). The metabreccia gradually passes upward into a chaotic rock unit ("sedimentary mélange" of Tartarotti et al. [107]), which consists of serpentinite and ophicarbonate blocks, up to meters wide, in a carbonate (now marble) matrix. This marble is unconformably overlain by a calc schist unit with a layered fabric due to carbonate-rich beds alternating with micaceous beds rich in garnet and chloritoid ( Figure 8D). These calc schists are generally avoid of ophiolitic material, although in the nearby areas they include tectonic slices of micaceous quartzites and metabasalt.

The Soana Valley Section across the Piemonte-Aosta Valley Border
The Soana valley (Italian Graian Alps) is a lateral tributary of the Orco valley, located in the Piemonte region; it borders with the Aosta Valley to the north in the Cogne-Champorcher area. The upper Soana valley, similar to the Cogne-Champorcher area, is characterized by a stack of metaophiolite and continental basement units involved in the Alpine collisional belt. From bottom to top, the nappe pile includes: The Upper Penninic Gran Paradiso basement, the Piedmont Zone including slices of metaophiolites with metasediments, the Austroalpine Santanel klippe, and the Sesia-Lanzo Zone of continental origin. The structural setting of the Soana valley suggests an early-Alpine coupling of continental and oceanic units within the subduction zone followed by post-peak exhumation and folding under greenschist facies conditions. The complex structural setting and the various extent of rock re-equilibration during exhumation are mirrored by the imbrication of eclogitic and non-eclogitic units. This nappe stack has been then deformed by post-nappe folding during the mid-Tertiary [132].
The eclogite facies metaophiolite units consist of antigorite-Ti-clinohumite-bearing serpentinites, Mg-and Fe-Ti metagabbros, sometimes with relict igneous textures, and finegrained metabasalts, with the latter often retrogressed under greenschists facies conditions. Serpentinites make up lenticular slices of foliated or massive rocks that, in the Campiglia valley (western branch of the Soana valley), are a few hundred meters thick and include eclogitic metagabbro and metabasalt bodies. In the eastern branch of the Soana valley (i.e., the Piamprato Soana valley) the eclogite facies metaophiolites consist of predominant glaucophane, garnet-bearing metabasites and omphacite, garnet, glaucophane, rutilebearing Fe-Ti metagabbros and Mg-metagabbro. This latter structural setting defined by mega-boudins of metagabbro wrapped by serpentinites is recurring in this area (i.e., Mt. Nero massif); it also recalls the one described in the Urtier valley where the eclogitic Pointe Noire Fe-Ti is wrapped by serpentinites.
Metasediments associated to the metaophiolites of the eclogitic units (Campiglia valley) consist of thin layers of garnet-bearing micaceous quartzites, chloritoid-garnet-bearing phyllites, and lawsonite-bearing calc schists. This sequence has a total thickness of a few hundred meters, although distorted by multiple folding effect. In the Piamprato Soana valley, metasediments are more abundant and represented by several types of rocks: Garnet, white mica-bearing quartzites often bearing Mn-rich minerals (piemontite, spessartine, ±alurgite), which give the rock a pink-violet color ( Figure 8E); garnet, chloritoid-bearing phyllites and micaschists; dark carbonate-rich calc schist; qtz-rich calc schists; garnetbearing chlorite-schists and calc schists. These latter are characterized, as in most calc schists outcrops of the Cogne-Urtier-Champorcher area, by a recurring compositional layering defined by marble layers alternating with micaceous layers bearing evident pseudomorphs on lawsonite ( Figure 8F). Chlorite schists are locally associated with sulphide mineralization [133]. Most metasediments exposed in the Piamprato Soana valley have been attributed to a blueschist-to-greenschist facies unit [132] for not showing HP mineral assemblages and are not considered in this paper. Nevertheless, we cannot exclude that these rock units (mostly made of carbonate-rich calc schists; quartz-rich calc schists; chlorite, white mica-bearing calc schists, phyllites and micaschists, and cm-thick layers of quartzites) result from pervasive re-equilibration of HP rocks under greenschist facies conditions.

Metasediments and Metaophiolites in the Monviso Massif
The Monviso Massif is a well-preserved composite ophiolite nappe (i.e., the Monviso Complex), N-S trending, located in the southwestern part of the Alpine belt (Figures 1 and 3) and crosscut by the Varaita, Po and Pellice valleys from south to north, respectively [134]. The metaophiolite sequence was metamorphosed under eclogite facies conditions; it consists of serpentinite, metagabbro, talc schist, metabasalt, and metasedimentary rocks. The massive serpentinite is mainly made of antigorite and magnetite, with rare strongly deformed porphyroclasts of clinopyroxene and orthopyroxene, and textural relics of spinel and olivine. Locally preserved lizardite with mesh structure suggests primary ocean-floor serpentinization. At the uppermost part of the serpentinite, both massive and sheared metaophicarbonate locally occur. The latter consists of irregular calcite and dolomite vein networks that lace around centimeter to decimeter 'clasts' of serpentinite. The serpentinite hosts bodies of Mg-and Al-rich and minor Fe-and Ti-rich metagabbros, ranging in size from dykes of decimeters thickness to bodies of hundreds of meters thickness and sub-kilometer length. Contacts between the massive serpentinite and metagabbro are marked by rodingitic reaction rinds. Locally, the lack of pervasive Alpine metamorphic overprint [135] indicates that the rodingite-forming metasomatic event started as part of an in situ oceanic serpentinization process. The overlying talc schist and serpentine schist (i.e., the Baracun Shear Zone), are up to a few tens of meters in thickness and include blocks of Fe-and Ti-rich metagabbro of decimeters to meters in length [12,136]. Unlike the metagabbro bodies within the massive serpentinite, this metagabbro is devoid of rodingitic reaction rims, indicating that their emplacement must have occurred after the main phase of intra-oceanic serpentinization of the upper mantle peridotites [52].
The massive serpentinite and metagabbros, and the serpentine schist-and talc schistbearing shear zone, are discontinuously overlain by metabasalt and by different types of metasediment. The metabasalt ranges in thickness from tens of meters to several hundreds of meters, and includes fine-grained aphyric metabasalt, pillow metalavas (up to 1 m in size), and volcanic metabreccia. The metasediments discontinuously occur throughout the Monviso Complex and are up to a few hundred meters thick. They mainly consist of two different types of successions, which basically differ for the occurrence or absence of ophiolite-derived detrital material, according to the tectono-sedimentary environment of their deposition (i.e., the Late Jurassic syn-extensional succession and the Cretaceous post-extensional succession, respectively [52]. The first type of succession originally deposited above mantle rocks exhumed on the seafloor (serpentinized peridotite with gabbro bodies and rocks of the detachment-related Baracun shear zone) and was laterally interfingered with basaltic lavas [12]. It mainly consists of calc schist containing ophiolite-derived material and calc schist interbedded by mafic metasandstone horizons, up to decimeters in thickness ( Figure 9A). Locally, bodies of metabreccia of gabbroic composition, up to a few meters in thickness, also occur. The calc schist is medium-grained and mainly made up of carbonate minerals (i.e., calcite, minor dolomite and ankerite), quartz, and white mica, with subordinate chloritoid, zoisite, and centimeter-sized aggregates of white mica, zoisite and graphite on post-lawsonite pseudomorphs ( Figure 9B). Detrital ophiolitic material is represented by abundant Mgrich chlorite, relics of chromite crystals rimmed by Cr-rich white mica, and magnetite pseudomorphs after spinel ( Figure 9C). The mafic metasandstone and metabreccia are made of angular to poorly rounded grains and up to several centimeter-sized clasts. The latter consists of omphacite and aggregates of chlorite, Cr-rich white mica, and epidote, and are embedded in a groundmass of zoisite, amphibole, pistacite, albite, chlorite, quartz, and white mica [61]. The second type of succession consists of quartzite, marble, and calc schist that originally sealed the intra-oceanic seafloor architecture of the Monviso ophiolite. In different sectors of the Monviso Complex, they show stratigraphic contacts above serpentinite, metagabbro, rocks of the Baracun Shear Zone, and the first type succession (calc schists and metabasalt) [103]. The quartzite derives from chert or radiolarite, and marks the transition from the syn-extensional succession and the post-extensional one. It discontinuously occurs as centimeters-to decimeters-thick horizons, which are interbedded at the top of basaltic metabreccia or stratigraphically rest above metabasalt ( Figure 9D) [62]. The quartzite is fine-grained and mainly made up of quartz and white mica, with minor garnet, Mg-Fe chlorite, pistacite, amphibole, and Mn-rich calcite. In a narrow sense, the very bottom of the second type succession is represented by decimeters-thick beds of withe or yellow marble ( Figure 9E). The latter closely resembles the Upper Jurassic-Lower Cretaceous Calpionella Limestone of the non-metamorphosed cover of the Internal Ligurian ophiolites in the Northern Apennines [137,138]. The marble is fine-grained and mainly consists of calcite, with minor white mica, quartz, zoisite, and chlorite. The quartzite and marble horizons are stratigraphically overlain by tens of meters thick calc schist, the most widespread rock variety in this succession of the Monviso Complex. This calc schist, devoid of any ophiolite-derived detrital material, is typically interbedded by centimetersto decimeters-thick layers of marble ( Figure 9F) [12]. It is fine-to medium-grained and made up of carbonate minerals (calcite, and minor dolomite and ankerite), quartz, and white mica, with subordinate chloritoid, Mg-Fe chlorite, and zoisite. Locally, the calc schist is also interbedded by several centimetres-thick layers of quartz-schist made up of quartz, white mica, and chlorite with minor albite and garnet ( Figure 9G). This latter quartz schist probably derives from terrigenous sandstone occurred into mixed siliciclastic-carbonate turbidites, which filled the ocean basin. Remarkably, the calc schist is rarely characterized by occurrence of sub-millimeter aggregates of calcite and Fe-oxide, which closely resemble the outline of planktonic Foraminifera sections ( Figure 9H). Similar aggregates have been detected in calc schist in the Western Alps [139,140] and Corsica [141], and they have been overall referred to the Albian-Cenomanian period.

Discussion
The Alpine metaophiolites are evidence of the sutured Jurassic Tethys Ocean that was interposed between the palaeo-European and palaeo-Adria continental plates. The Alpine metaophiolites have been involved in the orogenic cycle including subduction, collision, and exhumation. Consequently, part of them was probably removed, and part was exhumed and still remains within the Alpine orogenic wedge. They occur as dismembered and metamorphosed tectonic slices that rarely or never correspond to the idealized ophiolite suite defined by the Penrose conference [11]. In spite of the Alpine tectono-metamorphic reworking, some metaophiolites and their original sedimentary cover preserve records of their primary depositional setting and can be used for constraining the pre-orogenic evolution of the Jurassic Tethys Ocean.
The eclogite facies belt of the Western Alps, and particularly the metaophiolites exposed in the Aosta Valley and in the Monviso Complex, preserves textural and structural records of the pre-orogenic evolution, since it escaped the general structural reworking and recrystallisation during the exhumation and final stages of the Alpine convergent orogeny [142]. In fact, the occurrence of well-preserved HP mineral assemblages is likely due to the effect of deformation partitioning [143], acting since the inception of the Alpine subduction, which separated low-strained rock portions from high-strained ones. Highpressure metamorphic minerals and associated fabrics thus represent good markers for individuating low-strain domains that may preserve records of the primary intra-oceanic (pre-orogenic) architecture of the Tethyan depositional setting. Metasediments associated with ophiolites provide critical constraints to the reconstruction of the original depositional environment characterizing the Jurassic oceanic basin. This is well documented for ophiolites that were affected by low or very low-grade orogenic overprint, such as those exposed in the Northern Apennines [138]. In fact, it turned out that a comparative analysis of HP-metasedimentary sequences with analogue poorly deformed and recrystallized sections has been helpful for envisaging a possible scenario for the formation processes of the investigated successions [12,107,116,137,138].

Different "Tectono-Stratigraphic" Successions in the Western Alps
Structural and lithostratigraphic field observations as well as petrographic and mineralogical data related to the eclogite facies internal belt of the Western Alps allow to identify three main different tectono-stratigraphic successions that likely represent different tectonosedimentary depositional environments and tectonic evolutionary steps. Nevertheless, we are aware that our inferences surely underestimate the huge information widespread at a regional scale.
The first type of tectono-stratigraphic succession (hereafter "type 1"; Monviso and Miserin lake areas; Figure 10) is identified for the occurrence of serpentinites and metagabbros associated with abundant detrital material of ophiolitic composition mixed or interbedded within metasediments. The ophiolite basement rocks of this succession consist of serpentinites made of serpentine (antigorite), Cr-Ni-rich magnetite, ilmenite, and chromite. Rare porphyroclasts of clinopyroxene and orthopyroxene, and textural relics of spinel and olivine were recognized, attesting the mantle nature of these serpentinites. The occurrence of lizardite with mesh structure suggests a possible record of primary ocean-floor serpentinization. Serpentinites grade to metaophicarbonates consisting of serpentinite crosscut by veins or vein networks filled with carbonates, antigorite, or talc. This mantle section may host gabbroic intrusions forming dykes or bodies, with or without metasomatic rinds, as observed in the Monviso Complex. Only in the Monviso Complex area, the serpentinite + metagabbro basement can be discontinuously overlain by metabasalt ranging in thickness from tens of meters to several hundreds of meters, also including volcanic metabreccia.
The metasedimentary cover sequence of the type 1 succession starts with ophicarbonate breccias ("type 1a") or with calc schist containing ophiolite-derived material and calc schist interbedded by mafic metasandstone horizons ("type 1b"). The ophicarbonate breccias of type 1a include both clast-and matrix-supported breccias, with block-in-matrix and/or sedimentary mélange-type internal fabrics (e.g., the chaotic rock unit of the Miserin lake series). The monotonous composition of clasts and the occurrence of Cr-rich opaque minerals, reflect the ultramafic nature of the source feeding these breccias. In type 1b succession (e.g., Monviso Complex), the detrital ophiolitic material is represented by Mg-rich chlorite, relics of chromite crystals rimmed by Cr-rich white mica, and magnetite pseudomorphs after spinel. However, a mafic component is also recorded and attested by the occurrence of metasandstones and metabreccias preserving omphacite (in the Monviso Complex area) and of clinopyroxenite clasts within calc schist (in the Cogne-Urtier area). Both type 1a and 1b successions end with calc schists devoid of ophiolitic material, with a thickness ranging between a few meters to tens of meters; calc schists may include layers of marble and quartz-rich mica schists (Monviso and Miserin lake areas).
Therefore, the type 1 tectono-stratigraphic succession corresponds to a "reduced" succession where calc schists devoid of ophiolitic material unconformably overlain either mantle rocks or calc schists with detrital ophiolitic material, with no supra-ophiolitic covers (i.e., quartzite and marble) interposed. "Reduced" successions commonly characterize deposition along scarps of morphological or structural high reliefs within an articulated depositional environment. The second type of tectono-stratigraphic succession (hereafter "type 2"; Monviso Complex, St. Marcel and Soana valleys; Figure 10) consists of quartzite, marble, and calc schists devoid of ophiolitic material. These calc schists are well comparable with those described for the upper part of types 1a and 1b successions. The type 2 cover succession can overly type 1b successions or be in stratigraphic contact directly with serpentinite, metagabbro, or with the serpentine schist-and talc schist-bearing intra-oceanic extensional shear zones (e.g., the "Baracun shear zone" in the Monviso Complex) [52,103]. More often, this succession directly covers metamafic rocks, although the stratigraphic nature of the contact cannot be inferred certainly due to the occurrence, as in the St. Marcel valley, of actinolite schists underlying the contact between metaophiolite and quartzites and that could correspond to a tectonic contact. Summarizing, the type 2 tectono-stratigraphic succession may range from a "partially complete" succession (i.e., when it directly overlies mantle rocks) to a "complete" one (i.e., when it overlies type 1b successions), consisting of all the stratigraphic terms that were originally deposited in a basinal environment.
The third type of tectono-stratigraphic succession (hereafter "type 3"; Cogne-Urtier area; Figure 10) is characterized by the strict association of carbonate-and dolomite-rich rocks, metaconglomerates, and evaporitic rocks (mainly "cargneule") with calc schists, quartzites rich in quartz porphyroclasts. This association is of tectonic origin and must not be confused with a primary succession. It formed through tectonic transposition as attested by the occurrence of relict fold hinges related to the Alpine D 1 -D 2 phases, or to tectonic mixing as suggested by the presence of serpentinite slices interfingered within metasediments. Therefore, this tectono-stratigraphic unit or rock assemblage (i.e., the FDC) is particularly significant because it formed by the tectonic mixing of both rocks commonly interpreted as the sedimentary cover of thinned continental margins and ophiolite units [54,125].

Pre-Orogenic Evolution of the Alpine Metaophiolites as Deduced from the Metasedimentary Successions
Although subduction-to exhumation-related tectonic deformation and metamorphic recrystallisation partly obliterated the internal structure of the Tethyan oceanic lithosphere and the stratigraphic features of its cover successions, records of the primary tectonostratigraphic features can be recognized in several areas of the Western Alps, thus representing useful markers for unravelling the pre-orogenic evolution of the oceanic realm, and related passive continental margins. We used the tectono-stratigraphic successions defined above as markers to constrain various stages of the pre-Alpine history. The different characteristic and composition of those successions indicate that the emplacement of the oceanic lithosphere on the seafloor of the Jurassic Tethys oceanic basin was followed by various stages of sedimentation, often assisted by tectonics.
Syn-extensional stage. The occurrence of serpentinites, veined serpentinites, and metaophicarbonates, although partly attributable to the effect of Alpine carbonation of serpentinites [107,130,131,144], attest for upper mantle exhumation during widespread extensional deformation that, at least locally, was favored by the development of a lithosphericscale detachment fault [12,52,103]. A record of this latter kind of structure has been identified in the Monviso Complex (i.e., the "Baracun Shear Zone") also producing a Late Jurassic oceanic core complex [52]. The upper mantle peridotites (now serpentinized) were intruded by gabbroic bodies and dykes probably before or during the emplacement of the mantle peridotite (i.e., the "main magmatic event" of Balestro et al. [12] now recognizable in the Monviso Complex and in the Aosta valley [72,73]. Subsequent magmatic events delivering basaltic lava flows account for the occurrence of metabasalts directly covering the serpentinized peridotites or gabbros, as in the Monviso area [12]. However, this stage of extensional tectonics during the opening of the Jurassic ocean was mostly characterized by the formation of ophiolitic breccias and mafic metasandstone as products of syn-tectonic sedimentation ranging from hyperconcentrated flows to turbidite currents (i.e., mass transport processes). In this context, type 1a and type 1b successions are records of this syn-extensional stage (i.e., the "syn-extensional successions" of Balestro et al. [12,52] representing the lower part of "reduced" successions deposited along tectonic or morphological scarps of active structural or morphological high sectors within the oceanic basin. The deposition of breccias was triggered by the action of extensional faults, with or without concurrent volcanism. In the Aosta valley, detrital Cr-rich minerals and serpentine clasts within carbonate-rich rocks are the key mineralogical evidence for this syn-extensional stage. Types 1a and 1b successions are often directly covered by calc schists devoid of ophiolitic material (i.e., the same of the type 2 succession) that definitively sealed the syntectonic articulated morphology of the intra-oceanic basin (see below). All these features are consistent with a geodynamic setting close to a ridge axial valley or to a ridge-transform intersection (with or without oceanic core complex).
Post-extensional stage. The characteristics of type 2 tectono-stratigraphic succession, which consists of quartzites (from probable radiolarite), marble, and calc schists that are devoid of any intercalations of ophiolitic detrital material, are well comparable with those of the Tethyan ophiolites exposed in the non-metamorphosed Northern Apennine belt (i.e., radiolarian cherts, Calpionella Limestone, and Palombini Shales [138,145,146]. Similar to the Northern Apennines, the type 2 succession, was unconformably deposited on the articulated morphology of the oceanic basin, resulting from the lithospheric-scale extension associated to mantle exhumation (i.e., the syn-extensional stage). Therefore, type 2 succession can be interpreted as being post-extensional (i.e., the "post-extensional succession" of Balestro et al. [52]). The regional unconformity beneath this succession marks the temporal boundary between the lithospheric-scale extension and upper mantle exhumation (i.e., the syn-extensional stage) and a period of tectonic quiescence during which mainly pelagic deposition (i.e., type 2 succession) took place in and across the oceanic basin. Calc schists that are devoid of ophiolitic detrital material (i.e., calc schists of the uppermost types 1a and 1b successions and type 2 succession), rest directly above all the different types of successions (i.e., from "reduced" to "complete") or above mantle rocks, varying from the ophiolitic breccias and/or chaotic units of the type 1 succession (e.g., Monviso Complex and Miserin Lake) to metamafic rocks that were likely delivered during a magma-dominated stage (e.g., St. Marcel and Soana valleys). The occurrence in the Monviso Complex of sub-millimeter aggregates of calcite and Fe-oxide, which closely resemble the outline of planktonic Foraminifera sections of Albian-Cenomanian age, also confirm that part of the calc schists of the type 2 succession are comparable in age with the middle-uppermost part of the Lower to early Upper Cretaceous Palombini shale of the Northern Apennines. Interestingly, in the St. Marcel and Soana valleys, the occurrence of Cu-Fe sulphide mineralizations and a Mn-rich deposit interpreted as palaeo-hyrothermal fields of the Jurassic ocean [108,109,133] suggests that type 2 successions of these valleys likely resemble a pelagic sequence sedimented not far away from hydrothermal vents [105]. These post-extensional successions are inferred to be consistent with the same geodynamic settings of that postulated for syn-extensional successions.
Type 3 succession represents a tectono-stratigraphic unit, likely derived from tectonic mixing or tectonic transposition of both oceanic and continental lithostratigraphic successions or tectonic slivers during the early stages of the Alpine convergence. The composition of the tectonic slivers, including carbonate-and dolomite-rich rocks, metaconglomerates and evaporitic rocks with calc schists, and quartzites rich in quartz porphyroclasts, suggest that this succession likely consisted of primary pre-to syn-rifting sediments deposited on the thinned passive continental margin. We thus cannot exclude that the Cogne-Urtier tectono-stratigraphic rock assemblage at least in part was formed near an ocean-continent transition (i.e., OCT) environment.
This tectonic mixing includes serpentinites and troctolites hosting a magnetite mineralization of hydrothermal origin. The age of ca. 150 Ma obtained for this magnetite mineralization near Cogne constrains its origin to an advanced stage of the Tethys opening associated to hydrothermal activity.
For type 3 tectono-stratigraphic unit, the identification of garnet within the regional HP foliation in metasediments from the Cogne-Urtier valley area supports the hypothesis that this tectonic mixing occurred during the Alpine subduction.

Constraints for the Pre-Alpine and Alpine Evolution
Vertical facies variations in the meta-sedimentary successions investigated in the eclogite facies internal belt of the Western Alps and their mineralogy provide important clues for deciphering the physiography of the Jurassic Tethys ocean and its evolution during the Alpine convergence ( Figure 10). The syn-extensional sedimentary successions (types 1a and 1b) are identified for their abundance of ophiolitic breccias directly covering the serpentinites (ophicarbonate breccias) or occurring as intercalations within finer-grained sediments. These successions are consistent with a rugged seafloor topography resulting from intense tectonics, likely related to the development of extensional or transform faults with scarce magma delivering. Oceanic core complexes and detachment faults are likely structures contributing to the shape of the Jurassic Tethys ( Figure 10). All these features have been documented in modern slow-to ultraslow-spreading oceans [147][148][149] where sediments are often dominated by the occurrence of breccias [150,151]. Serpentinite breccias have been also documented near modern OCT, such as the Galicia margin [152][153][154], so we cannot exclude that part of the studied successions were emplaced not far away from the Tethys passive continental margins. The calc schists of both types 1 and type 2 successions found in the investigated areas of the Western Alps, likely deposited above both the "complete" (e.g., in the Monviso area, St. Marcel and Soana valleys) and the "reduced" successions, where the basal quartzites and marble are lacking (e.g., Miserin lake area). This evidence suggests that at the time of calc schists' deposition, the articulated syn-extensional seafloor physiography of the Tethyan Ocean floor was roughly flattened, allowing the deposition of distal turbidite system. Finally, the type 3 tectono-stratigraphic unit, although most probably inherited from the Alpine tectonics acting since the inception of the convergence and subduction, represents clear evidence of the existence and involvement of a passive continental margin and its related sedimentary cover.

Concluding Remarks
The meta-sedimentary tectono-stratigraphic successions here analyzed belong to the Alpine metaophiolites deriving from the closure of the Jurassic Tethys Ocean. These successions have been involved in the subduction and collision processes responsible for the formation of the Alpine orogenic belt, as attested by the occurrence of well-preserved eclogite facies mineral assemblages, partly re-equilibrated under greenschist facies conditions. In spite of the severe Alpine reworking, these successions are among the best-preserved examples ever found in the Western Alpine metaophiolites. They provide useful tools for deciphering their original setting and the pre-orogenic evolution of the Jurassic Tethys. Three main types of tectono-stratigraphic successions were identified in the Aosta Valley region and in the Monviso area (Piemonte region): 1.
Type 1 succession has an ophiolite basement composed of serpentinite, ophicarbonate, and metagabbros covered by a metasedimentary cover rich in ultramafic and mafic breccias and detrital material sealed on top by calc schists devoid of ophiolitic material. Its lower part (i.e., types 1a and 1b), below calc schists, is inferred to represent a "reduced" succession deposited along morphological or structural scarps of high reliefs, developed during the syn-extensional stage of the Jurassic Tethys Ocean leading to upper mantle exhumation favored by the development of a lithosphericscale detachment fault.

2.
Type 2 succession consists of quartzite, marble, and calc schists that are devoid of ophiolitic material intercalations. This cover succession can be in stratigraphic contact above both types 1a and 1b successions or on mantle rocks. It is interpreted as a "partially complete "to "complete" succession, unconformably deposited on the articulated morphology of the oceanic basin during the post-extensional stage, possibly not far away from hydrothermal vents.

3.
Type 3 succession is characterized by the strict association of carbonate-and dolomiterich rocks alternating with metaconglomerate, evaporitic rocks (mainly "cargneule"), calc schists, quartzites, and serpentinite slivers. This rock association is interpreted as deriving by tectonic transposition of both continent-derived and ocean-derived lithologies during the early Alpine ductile deformation phases. Although tectonically mixed, these rocks are attributable to an original ocean-continent-transition (OCT) zone.
Finally, the ophiolite-free calc schist sedimentation sealing the metasedimentary successions suggests that at the time of calc schists' deposition, the articulated syn-extensional seafloor physiography of the Tethyan Ocean floor was roughly flattened, allowing deposition of distal turbidite system.

Future Perspectives
A comparative analysis of the Western Alpine metaophiolite metasedimentary covers, with the sedimentary sequences of poorly deformed and metamorphosed orogenic belts such as the Apennine chain, would be useful to better identify their original counterparts. However, among the tectono-stratigraphic successions here investigated, only type 2 succession is comparable to the radiolarian cherts-Calpionella Limestone-Palombini Shales series of the Northern Apennines, dated as Middle Jurassic-Early Upper Cretaceous.
In all the studied areas, there is no clear evidence of successions comparable with the classical Late Cretaceous (i.e., Maastrichtian)-Paleocene flysch succession (e.g., Helmintoides flysch Auct.) or with the Late Cretaceous (Santonian-Campanian) sedimentary mélanges with blocks and olistoliths of mantle rocks and supra-ophiolitic covers (e.g., Casanova Complex Auct.) observed in the non-to low-grade metamorphic units of Alpine-Apennine system (i.e., Internal and External Ligurian Units of the Northern Appennines, and Schistes Lustrés and Combin units in Western Alps). Several reasons could be invoked to address this issue among which: (i) No sediments analogue to those observed in the Northern Apennines were deposited; (ii) the Alpine subduction completely swallowed these sediments into deep mantle; (iii) they were accreted into the Alpine frontal wedge during convergent stages and thus early decoupled from the HP metaophiolite units. As future developments, further investigations should be carried out in more external units of the Western Alps characterized by huge volumes of calc schists s.l. englobing ophiolitic materials (e.g., Schistes Lustrés and Combin units) in order to address this issue.
A further topic of investigation regards the type 3 tectono-sedimentary unit, which is inferred to be the product of tectonic folding and transposition during the early stages of the Alpine evolution under HP metamorphic conditions. Its proximity to the continental Pennidic units may support the hypothesis of a tectonic mixing between oceanic and continental-derived slices during the convergent tectonics, possibly derived from a primary ocean-continent transition (OCT) zone. The challenge is now to quantify the contribute of convergent tectonics in juxtaposing and mixing continental and oceanic units with respect to a primary OCT zone, which already consisted of extensional continental allochtons above mantle rocks (i.e., definition of the hyper-extended margin physiography). This challenge should be tested in similar areas of the Western Alps close to the main contacts between oceanic and continental units (e.g., Monte Rosa, Dora Maira Penninic units), providing new essential constraints to better understand the evolution of Western Alps as well as the role played by the inherited pre-orogenic settings.
Author Contributions: P.T.: Conceptualization, data acquisition, interpretation of data, drawings, and writing. S.M.: Conceptualization and critically revising for important intellectual content; field data acquisition and interpretation. A.F.: Conceptualization, writing, drawings, and critically revising for important intellectual content. G.B.: Conceptualization, writing, and drawings. All authors have read and agreed to the published version of the manuscript.