Fractional View Analysis of Fornberg–Whitham Equations by Using Elzaki Transform

: We present analytical solutions of the Fornberg–Whitham equations with the aid of two well-known methods: Adomian decomposition transform and variational iteration transform in-volving fractional-order derivatives with the Atangana–Baleanu–Caputo derivative. The Elzaki transformation is used in the Atangana–Baleanu–Caputo derivative to ﬁnd the solution to the Fornberg–Whitham equations. Using certain exemplary situations, the proposed method’s viability is assessed. Comparative analysis for both integer and fractional-order results is established. For validation, the solutions of the suggested methods are compared with the actual results available in the literature. Two examples are considered to check the accuracy and effectiveness of the proposed


Introduction
Fractional differential equations have become famous recently due to their demonstrated applicability in several seemingly disparate scientific and engineering domains. For instance, the non-linear oscillations of an earthquake can be described with a fractional derivative, and the fractional derivative of traffic fluid dynamics models can address the inadequacy caused by the assumption of continuous traffic flows [1,2]. Fractional differential problems are also used for modeling numerous chemical processes and mathematical biology, engineering, and science problems [3][4][5][6]. Non-linear partial differential equations (NPDEs) describe various physical, biological, and chemical events. Existing research focuses on constructing accurate traveling-wave solutions for such equations. Exact explicit answers assist scientists in comprehending the complex physical phenomena and dynamical processes depicted by NPDEs [7][8][9]. Numerous notable strategies for achieving exact solutions to NPDEs have been suggested over the past four decades [10,11]. Works [12][13][14][15][16][17][18] give reviews or/and developments of various numerical approaches to linear [13][14][15][16][17] and non-linear [12,13,16] convection and dispersion/diffusion problems, [19] proposes an interesting method for creating approximate analytical results (based on double parameter transform perturbation expansion), [20] introduces a homotopy perturbation technique for non-linear transports equation, and [21] contains a detailed review of different modern applications of fractional calculus. Therefore, symmetry analysis is beautiful for studying partial differential equations, and especially when examining equations from the mathematical concepts of accounting. The key to nature is symmetry; however, the majority of natural observations lack symmetry. The phenomena of unexpected symmetry-breaking is an advanced mechanism for concealing symmetry. There are two types of symmetry: finite and infinitesimal. It is possible to have discrete or continuous finite symmetries. While space is a continuous change, parity and temporal inversion are discrete natural symmetries. Mathematicians have always been fascinated by patterns. The categorizing of spatial and planar patterns began in earnest during the eighteenth century. Unfortunately, solving fractional nonlinear differential equations precisely has proven to be quite difficult.
In this article, we investigate the fractional non-linear Fornberg-Whitham (FW) equation of the following form: with the initial condition Ψ(ϑ, 0) = g(ϑ), where u is defined as the fractional order of the FW equation. The fluid velocity term is Ψ(ϑ, τ), ϑ is the spatial coordinate, and τ is the time. The fractional derivative is understood in the sense of a Atangana-Baleanu-Caputo operator. Various outputs can be obtained by varying the parameters in the general response expression that describes the fractional-order derivative [22]. In the case of u = 1, the fractional FW equation reduces to the integer non-linear FW equation. Fornberg and Whitham achieved a peaked solution of the type Ψ(ϑ, τ) = Ae (− 1 2 |ϑ− 4s 3 |) , where A is an arbitrary constant. Numerous authors [23][24][25] have investigated fractional non-linear FW equations. To enhance fractional calculus, analytical results of linear and non-linear equations have been obtained by the differential transform approach [26][27][28].
In 2010, Tarig Elzaki developed a new integral transformation called the Elzaki transformation. The Elzaki transform is a modified transform of Sumudu and Laplace transforms [29]. Notably, some differential equations with variable coefficients may not be solvable using the Sumudu and Laplace transformations but can be easily solved using the Elzaki transform. Various authors have solved fractional non-linear differential equations by a mixture of the Elzaki transformation and Adomain decomposition [30]. The Adomain decomposition transform combines the Adomian decomposition and Elzaki transformation. A domain decomposition transform is a simple and efficient approach for investigating linear and non-linear fractional partial differential equations. It is noted that, unlike Runge Kutta of order 4 (RK4), the suggested method does not need a predetermined declaration size. In comparison to other analytical approaches, the domain decomposition transform method uses fewer parameters and does not require discretization or linearization [31][32][33][34].
The variational iteration method was suggested in the late 1990s to solve seepage flow with fractional derivatives and a non-linear oscillator. This technique has been extensively used as a primary mathematical method for handling specific non-linear equations. This methodology has been proven to work well for dealing with various issues [35][36][37][38]. The Elzaki transformation is also used to modify this method; that is why the modified technique is known as the variational iteration transformation method (VITM). VITM has been used to analyze different partial and ordinary differential equations. VITM has an advantage over Adomian's decomposition because it can solve equations without applying an Adomian polynomial. While mesh point approaches provide approximations at mesh points, this methodology offers a quick solution to the problem. The exact solution can be approximated accurately using this method as well [39][40][41].
This article is organized as follows. Section 2 presents the basic definitions and theorems, which is helpful for the successive sections. Furthermore, we also describe the governing model in this section. In Sections 3 and 4, we used the Adomain decomposition transformation method (ADTM) and the variational iteration transformation method (VITM) to solve fractional-order FW equations with the help of the Atangana-Baleanu-Caputo operator. VITM and ADTM achieve semi-analytical results in the form of series solutions. Two examples are presented in Section 5. The conclusions are presented at the end of the article.

Preliminaries and Model Description
In this section, the related preliminaries, including five definitions and two theorems, are provided as a basis for further discussions. Furthermore, the fractional order PDE is also discussed here.

Model Description
In this study, the following fractional-order PDEs are considered.
The initial condition is where AB D u τ = ∂ u ∂τ u is the fractional Atangana-Baleanu-Caputo derivative of u,Ḡ is linear and N nonlinear functions, respectively, and the source term is P.

Methodology of Adomian Decomposition Transform Method
Applying Elzaki transform to Equation (9), we get Taking the Elzaki transform of the differentiation property, we have The Adomian decomposition transform method results in the infinite series Ψ(ϑ, τ) in the following form, The non-linear term N is defined as With the use of Adomian polynomials, the non-linear term may be determined. Thus, the Adomian polynomials is defined as Then, putting Equations (13) and (14) into (12) gives Using the inverse Elzaki transform on Equation (16), we get Define the terms as follows: In general for ß ≥ 1 it is defined as
Under the assumption of 0 < ε < 1, the mapping is a contraction. As a solution to the Banach fixed-point theorem for contractions, there is a unique result to 11. As a solution, there is conclusive evidence. (11) in general form will be convergence.

Theorem 4 (Convergence Analysis). The solution of Equation
Proof. Suppose that S ß be the nth partial sum, that is W ß = ∑ n =0 Ψ  (ϑ, τ). First, we define that { W ß } is a Cauchy-Banach spaces sequences in M. Taking into consideration they Adomian polynomial, we obtainR Now, Consider ß = q + 1; then . Similarly, we have the triangular inequality Hence, { W 1 } is a Cauchy sequence in K. As a solution, the series ∞ ∑ ß=0 Ψ ß converges, and this completes the proof.

Methodology of VITM
The analysis of a fractional partial differential equation with the help of the VITM is introduced.
The implementation of the Elzaki transform of Equation (23) implies The famous Lagrange multiplier iterative method on function Ψ ß+1 (ϑ, τ) gives where the Lagrange multiplier λ(s) is defined as Using inverse Elzaki transform E −1 , Equation (26) is transformed into the following form

Problem 1.
Consider the non-linear fractional-order FW equation [25,26] with the initial condition Taking the Elzaki transformation of Equation (29) gives Using the inverse Elzaki transformation, we have Applying the Adomain procedure, we have Some non-linear terms found with the help of Adomain polynomials are defined as The Adomian decomposition transform method solution of problem (1) is The simplification of Equation (35) is Now, using the VITM to achieved a series-type solution.
Applying the VITM to Equaation (29), we obtain where For ß = 0, 1, 2, · · · The exact result of Equation (29) In Figure 1, the analytic result of VITM/ADTM of Problem (1) is represented in a closed relation with each other at u = 1 and 0.8. We found that the analytical solutions are in closed contact with the exact result of Problem (1). In Figure 2

Informed Consent Statement: Not applicable.
Data Availability Statement: Not applicable.