New Oscillation Results for Second-Order Neutral Differential Equations with Deviating Arguments

In this paper, we focus on the second-order neutral differential equations with deviating arguments which are under the canonical condition. New oscillation criteria are established, which are based on a first-order delay differential equation and generalized Riccati transformations. The idea of symmetry is a useful tool, not only guiding us in the right way to study this function but also simplifies our proof. Our results are generalizations of some previous results and we provide an example to illustrate the main results.

We restrict our attention to those solutions x(t) of Equation (1), which means a function x ∈ C 2 [L x , ∞), L x ≥ t 0 , and has the property r(t)ψ(x(t)) (y (t)) γ ∈ C 1 [L x , ∞). We consider only solutions x of the equation which satisfies sup {|x(t)| : t ≥ L} > 0 for all L > L x . As usual, a nontrivial solution of Equation (1) is called oscillatory if it has arbitrarily large zero, otherwise, it called to be nonoscillatory. Equation (1) is called oscillatory if all of its solutions are oscillatory.
The qualitative properties of ordinary differential equations could be regarded as an age old theme. Such equations are often widely used in physics, population dynamics, economic problems, mechanical control, and other fields. Although it is much more difficult to study differential equations with delay than those without delay, with delay or multiple delay differential equations can better reflect the practical problems. For example, one of the problems is to describe the vibrating masses attached to an elastic bar. In the study of these equations, the solutions of the oscillation are the most popular topic and still receives much attention. The existed researches about delay differential equations can refer to the book [1] and article [2]. Different kinds of deviating arguments equations have been studied extensively, since Fite [3] first studied the oscillatory properties of the deviating arguments equation in 1921. For examples, Zhao and Chatzarakis studied the second-order equations in [4] and [5] respectively. Sun considered the third-order nonlinear differential equations [6]. Li studied the fourth-order differential equations [7]. Moaaz studied the even-order differential equations [8].
It is well-known that the study of the equations are based on the canonical case or non-canonical case, and the oscillation results obtained in these two cases are also different [9][10][11][12]. In this article, we only consider the canonical case, and a large number of articles provided different oscillation criteria for the canonical second-order differential equations (CSODE). For examples, Irena [9] gave us the Kneser-type oscillation criteria for CSODE with delay. Xu [13] studies the Kamenev-type oscillation criteria for CSODE with neutral and delay. Gai [14] studies the Philos-type oscillation results for second-order neutral nonlinear differential equations.
In the following, Xu [13] considered the second-order neutral equations Meng [15] considered the even-order neutral equations Ye [16] studied the second-order quasilinear neutral equations Zhao [4] studied the second-order neutral equations with distributed deviating argument In addition, in [17], Bazighifan used the oscillation of second-order equation to give the criterion of oscillation of higher-order equation. In [18], Moaaz used the oscillation of the first-order equation to give the criterion of oscillation of second-order equation. In [19], we get a new method to estimate the fraction function y(σ(t)) y(t) . Ref. [2] gives us a new method to set Kamenev-type oscillation criteria. The background outlined above motivates our present research. We also want to study some new methods of oscillation results for second-order delay differential equation, which have more than one neutral delay under the canonical condition. We objective to study the Equation (1) by applying the known oscillation results of first-order differential equations or the generalized Riccati-type function.

Preliminaries
In this part, we considered the function x(t) as the eventually-positive solution. In fact, for the case of the eventually negative solution, the proof process is similar to the eventually positive solution. We will not prove it in detail. In the next sections of our paper, we need the followinglemmas.
where the function b 1 (t) is arbitrary, function b 2 (t) and function ν are always positive, γ is a positive constant. Then the function B(ν) has the maximum value B max at ν 0 on (−∞, +∞), such that is a positive solution of Equation (1), then there exists a t 1 ≥ t 0 , such that From Based on Equation (1), we obtain That means r(t)ψ(x(t)) (y (t)) γ is eventually one sign. Due to (A 1 ) and (A 4 ), we have y (t) > 0 or y (t) < 0 hold. We assert y (t) > 0. If y (t) < 0, from (4), there exists t 2 > t 1 , such that when t > t 2 , we have where N is a positive constant. Then integrate y (t) in (5) from t 2 to t, we have Let t → ∞, (6) is contradicts assumption (A 1 ). This completes the proof.

Oscillation Results
In this section, we established some new oscillation criteria for Equation (1). We use the following notations for the simplicity: If the first-order delay differential equation is oscillatory, then every solutions x(t) of Equation (1) are oscillatory.

Remark 1.
The eventually negative solution in the proof is similar, we don't give the proof and the corresponding lemma. However, the application of symmetry can unify the proof. If we assume that x(t) is an eventually negative solution of Equation (1). Because γ is a quotient of odd positive integers, we get (−1) γ = −1. Multiplying both Set x(t) = − x(t), then the conclusion will go back to the eventually positive solution case.
then all solutions of Equation (1) then we get Equation (7) is oscillatory. From Theorem 1, we get Equation (1) is oscillatory. The proof is complete.
Proof. The proof is similar to that Ladde et al. [22] (Theorem 2.1.3). So we ignore. The proof is complete.

Remark 2.
The conclusion of the Theorem 1 is based on the method of Mozza's paper [18]. The advantage of this method is that the existing oscillation criterion of the first-order delay equation can be directly applied to Equation (7), and then the oscillation results of CSODE can be given. However, from page 440 to 461 in Book [1], we noted most of the conclusions of the first-order delay differential equation must be calculated the function k M Q(t)Ψ γ (σ(t)). That is to say, the calculation of this method is more complex.