Evaluation of Investment Policy Based on Multi-Attribute Decision-Making Using Interval Valued T-Spherical Fuzzy Aggregation Operators

: Expressing the measure of uncertainty, in terms of an interval instead of a crisp number, provides improved results in fuzzy mathematics. Several such concepts are established, including the interval-valued fuzzy set, the interval-valued intuitionistic fuzzy set, and the interval-valued picture fuzzy set. The goal of this article is to enhance the T-spherical fuzzy set (TSFS) by introducing the interval-valued TSFS (IVTSFS), which describes the uncertainty measure in terms of the membership, abstinence, non-membership, and the refusal degree. The novelty of the IVTSFS over the pre-existing fuzzy structures is analyzed. The basic operations are proposed for IVTSFSs and their properties are investigated. Two aggregation operators for IVTSFSs are developed, including weighted averaging and weighted geometric operators, and their validity is examined using the induction method. Several consequences of new operators, along with their comparative studies, are elaborated. A multi-attribute decision-making method in the context of IVTSFSs is developed, followed by a brief numerical example where the selection of the best policy, among a list of investment policies of a multinational company, is to be evaluated. The advantages of using the framework of IVTSFSs are described theoretically and numerically, hence showing the limitations of pre-existing aggregation operators.


Introduction
Quantifying the uncertainty or imprecision of an event by a crisp number on a scale of zero to one has always been a tough task.The story began with Zadeh's model of the fuzzy set (FS) [1], where the imprecision of an event is expressed by a crisp number from zero to one [0, 1].Soon after the idea of the FS was introduced, it was realized that it is indeed a tough job to describe the uncertainty using crisp numbers.Therefore, the concept of the interval-valued fuzzy set (IVFS) [2] was developed, where the membership grade is described in terms of a closed sub-interval of zero to one [0, 1] rather than by crisp numbers.Representing the imprecision using an interval instead of a crisp number seems more real.
In 1986, Atanassov developed the notion of the intuitionistic fuzzy set (IFS) [3], introducing the concept of the non-membership grade along with a membership grade to model a real-life phenomenon, which was then enhanced to interval-valued IFS (IVIFS) [4].It basically bounds the sum of the membership and non-membership grades between zero and one.Pointing out the limitations of IFS, Yager [5] introduced the idea of the Pythagorean fuzzy set (PyFS), which is also based on two characteristic functions but with a larger domain, by bounding the sum of the squares of the membership and non-membership grades between zero and one.Nevertheless, the PyFS failed to justify the situation when the sum of two grades crosses the boundary of zero to one.To describe such situations, Yager [6] introduced the notion of the q-rung ortho pair fuzzy sets (q-ROPFSs), which generalize both IFS as well as PyFS by enlarging their domains.A q-ROPFS allows the sum of the q-th power of the membership and non-membership grades to be between zero and one.The fuzzy structures of the interval-valued PyFS (IVPyFS), as well as the interval-valued q-ROPFS (IVq-ROPFS), have also been introduced by Peng and Yang [7] and Joshi et al. [8] due to the importance of expressing fuzziness in terms of intervals instead of crisp numbers.Further research work on IFSs, PyFSs, IVIFSs, and IVPyFSs is extensive [9][10][11][12][13][14][15][16].
Cuong [17] introduced a novel concept of the picture fuzzy set (PFS) by pointing out a special situation where one needed four characteristic functions to model a real-life event, such as voting.Cuong's model of the PFS created a new dimension in the field of fuzzy algebraic structures and scientists started to contribute to the development of PFSs due to its significance [18][19][20][21].Cuong's PFS possessed the same problem as the IFS had, i.e., it bound the sum of the membership, abstinence, and non-membership grades between zero and one.This restriction does not allow the decision makers to select the values of three characteristic functions by their own choice.Realizing the issue, Mahmood et al. [22] developed a new model of the spherical fuzzy set (SFS) and the T-spherical fuzzy set (TSFS).A TSFS binds the sum of the q-th power of the membership, abstinence, and non-membership between zero and one and, hence, was declared as a diverse structure compared to the PFS, PyFS, and IFS.Due to the larger variety of characteristic functions with no limitation, several much-needed ideas can be developed in the framework of TSFSs, such as the aggregation theory of TSFSs, graphs of TSFSs, and similarity and distance measures of TSFSs.Some work on the aggregation of TSFSs, relations of TSFSs, and similarity measures of TSFSs is abound [22,23].
MADM (multi-attribute decision-making) models, based on weighted averaging (WA) and weighted geometric (WG) operators, are hot research topics in the field of fuzzy algebraic structures.The theory of the WA and WG aggregation operators of IFSs has been developed by Xu [24] and Xu and Yager [25], before being further applied in MADM problems.Some generalized WA, induced generalized WA, and induced generalized WG aggregation operators for IFSs have also been developed [26][27][28] and their applications in MADM problems have been demonstrated.The WA and WG operators for IVIFSs are proposed by Wang [29] and Wei and Wang [30], respectively, while some generalized WA and generalized WG operators for IVIFSs have been developed by Yu [31] and Xu and Cai [32], respectively.Some other useful tools in the aggregation of IFSs and IVIFSs, along with their applications, were also constructed [33][34][35][36][37][38].For PyFSs, Rahman et al. [39] and Peng and Yang [40] developed the Pythagorean fuzzy WA and WG aggregation operators.The WA and WG aggregation tools for IVPyFSs [41,42] were formulated and the recent advancement on the theory of the aggregation of PyFSs and IVPyFSs, alongside their applications in MADM, are discussed [43][44][45][46][47].The MADM and aggregation theory of hesitant fuzzy sets (HFSs) and bipolar-valued HFSs have also been developed [48][49][50].Due to their enhanced and diverse structure, PFSs have gained attention and some WA, as well as WG, aggregation tools have been developed [51,52].The weighted averaging operators for TSFSs have been introduced by Ullah et al. [53] and their viability in MADM is demonstrated.
MADM is a rigorous research topic that has been thoroughly studied using WA and WG operators, some distance and similarity measures, and some other techniques as well.Some T-spherical interactive aggregation operators and their applications in MADM are studied [54].The difficulty of undertaking smart medical device selection using the neutrosophic TOPSIS method [55], as well as the problem of risk management in economics [56], are some examples.To handle strategic planning, a neutrosophic AHP and SWOT method is developed [57] and neutrosophic triangular numbers are utilized in MADM problems [58].The issue of the supplier selection is reduced by using the neutrosophic group ANP-TOPSIS method [59], while the evaluation of e-government websites uses the neutrosophic VIKOR method [60].Other interesting work on MADM is diverse in its direction [61][62][63][64][65][66][67][68][69][70][71][72][73].
Keeping in mind the structure of the TSFS and the importance of describing the membership grades in terms of intervals, we henceforth introduce the concept of the IVTSFS, along with its corresponding WA and WG aggregation operators, such that its viability in MADM is demonstrated.
The key goals of this manuscript are as follows: 1.
To introduce the idea of the IVTSFS that incorporates the impression of an event with four membership grades in terms of intervals with no limitations.2.
To propose aggregation tools that can be applied to those problems where the IVFS, IVIFS, and IVPFS fail to be applied.

3.
To study a MADM problem, utilizing the aggregation operators of IVTSFSs where the selection of the best investment policy is carried out.4.
To prove that the proposed aggregation operators will reduce to match other pre-existing aggregation operators, hence showing their superiority, by using some suitable constraints.
This article is organized as follows: In Section 1, a preamble of pre-existing ideas is studied along with their WA and WG operators.Section 2 will describe some basic concepts and their mutual relations.Section 3 is based on the importance of using interval-valued fuzzy frameworks instead of crisp-valued fuzzy frameworks.Section 4 will be on some basic operations of the sum, product, scalar multiplication, and power operation.The properties of these new operations are also investigated.In Section 5, we will develop the theory of the WA aggregation operators, where we propose the concept of the interval-valued T-spherical fuzzy weighted averaging (IVTSFWA) operator, which is further extended to interval-valued T-spherical fuzzy ordered weighted averaging (IVTSFOWA) and the interval-valued T-spherical fuzzy hybrid averaging (IVTSFHA) operator.The validity of these aggregation operators will be validated using the induction method and their aggregation associated properties are demonstrated.Section 6 will be on the interval-valued T-spherical fuzzy weighted geometric (IVTSFWG), the interval-valued T-spherical fuzzy ordered weighted geometric (IVTSFOWG), and the interval-valued T-spherical fuzzy hybrid geometric (IVTSFHG) operators.Section 7 will be on the construction of a MADM process in the context of IVTSFSs and a MADM problem will be solved using IVTSFWA and IVTSFWG operators.Section 8 will include a comparative study of the proposed operators with the existing ones.The advantages of our proposed work will be discussed in Section 9, followed by the conclusion in Section 10.

Preliminaries
In this section, the basic definitions of the IVIFS, IVPyFS, IVq-ROPFS, and IVPFS are proposed to analyze their structures.The basic operations of these concepts are also analyzed.Note that X will denote the universe of discourse and s, i, d and r will denote the membership, abstinence, non-membership, and refusal degree of an element, respectively.

Definition 1.
[8] An IVq-ROPFS is having the shape I = {(s(x), d(x)) : x ∈ X}, where s(x ) and d(x) are mappings from X to some closed subinterval of [0, 1], such that s(x) = s l (x), s u (x) and d(x) = d l (x), d u (x) with a restriction that 0 ≤ (s u ) q (x) + (d u ) q (x) ≤ 1 for some q ∈ Z + .The term 'hesitancy degree' is denoted and defined by r(x) = and the pair (s(x), d(x)) = s l (x), s u (x) , d l (x), d u (x) is considered as the interval-valued q-rung ortho pair fuzzy number (IVq-ROPFN).
The following remark will explain the generalization of the IVq-ROPFS over the existing fuzzy structures.
The basic operations for two PyFSs were proposed in the following definition: Definition 3. [39,40] For PyFSs A, B and for λ > 0, we have: ( Based on the work discussed in this section, the concept of the IVTSFS is developed and its generalization is proven with the help of some remarks.

The Significance of Interval-Valued Fuzzy Structures
The idea of representing the membership grade of a FS using an interval was developed by Gorzalczany [2].Sometimes, the impression of an event cannot be characterized by a crisp number.In such occasions, the concept of the IVFS can be a useful tool.The interval-valued frameworks for the IFS, PyFS, q-ROPFS, and PFS are developed in [4,7,8,17].Now, we discuss the significance of using interval-valued frameworks instead of the ordinary fuzzy framework numerically.
Consider the following example in which the selection of the best candidate is to be carried out among four candidates (C i , i = 1, 2, 3, 4) based on four attributes (G j , j = 1, 2, 3, 4) under the weight vector w = (0.22, 0.34, 0.27, 0.17) T .In this case, the evaluation information of the candidates is in the form of IVIFNs, which are given in Table 1.
Table 1.The decision matrix where C i denote alternatives and G j denote the attributes.
To aggregate the data provided in Table 1, Xu and Cai [32] developed the following aggregation tool: The aggregated results are: The score of IVFN, I = s l , s u , d l , d u , is defined as [34]: Using this score's functions, we have: Hence, C 2 is the suitable candidate, according to the MADM method based on the IVIFWA operators.
Assigning a crisp value to the membership and non-membership grade of the above problem reduces the information in Table 1 in the context of IFSs.Such information can be aggregated using the aggregation operators proposed by Xu [24].The decision matrix for the problem discussed above in the context of IFSs is given in Table 2.
Table 2.The decision matrix where C i denote alternatives and G j denote the attributes.
By analyzing both results, it is observed that the result obtained using the aggregation of the IVIFS is significant compared to the one obtained using the IFS.This shows the importance of using interval-valued fuzzy frameworks over crisp-valued fuzzy frameworks.
The concept of the TSFS developed in [22] is a generalization of the q-ROPFS, SFS, PyFS, PFS, IFS, and FS.Therefore, the interval-valued structure for TSFSs would have a great impact, due to the diverse structure of the TSFS.The concept of the IVTSFS will provide flexibility in assigning the membership grades of the TSFS, in terms of the intervals rather than by a crisp number.Furthermore, as discussed in the first section, there are some situations, such as voting or decision-making, where opinions may involve more than two or three aspects.To deal with such situations, the TSFS has been proven to be useful [22,23,62].Therefore, the idea of TSFSs is further strengthened by the introduction of the IVTSFS.In the next section, the definition of the IVTSFS is proposed and its superiority over the existing fuzzy concepts is shown, with the help of some useful remarks.

Interval-Valued T-Spherical Fuzzy Set
This section describes the concept of the IVTSFS and its comparison with pre-existing concepts.We develop the basic operations for IVTSFSs and their properties are investigated.Note that IVTSFS(X) will denote the set of all of the IVTSFSs.Definition 4.An IVTSFS has the shape I = {(s(x), i(x), d(x)) : x ∈ X}, where s(x), i(x), and d(x) are mappings from X to a closed subinterval of [0, 1], such that s(x) = s l (x), s u (x) , i(x) = i l (x), i u (x) , and d(x) = d l (x), d u (x) with a restriction that 0 ≤ (s u ) q (x) + (i u ) q (x) + (d u ) q (x) ≤ 1 for some q ∈ Z + .
The term 'refusal degree' is defined by r and the pair is considered to be the interval-valued T-spherical fuzzy number (IVTSFN).
The existing frameworks will become special cases of the IVTSFS.Consider the following theorem: Theorem 1.An IVTSFS reduces to: (1) TSFS: if we consider s l = s u , i l = i u and d l = d u [22].
(5) PFS: if we consider q = 1 and s l = s u , i l = i u and d l = d u [17].(6) IVq-ROPFS: if we consider i l = i u = 0 [8].(7) q-ROPFS: if we consider s l = s u , i l = i u, and d l = d u [6].(8) IVPyFS: if we consider q = 2 and i l = i u = 0 [7].(9) PyFS: if we consider q = 2 and s l = s u , i l = i u = 0 and d l = d u [5].(10) IVIFS: if we consider q = 1 and i l = i u = 0 [4].(11) IFS: if we consider q = 1 and s l = s u , i l = i u = 0 and d l = d u [3].(12) IVFS: if we consider q = 1 and i Next, the operations of the sum, product, scalar multiplications, and power operation for IVTSFSs will be introduced.With the help of a remark, it is shown that these operations are generalizations of operations of existing ideas under some restrictions.Definition 5.For A, B ∈ IVTSFS(X).The operations of the sum, product, scalar multiplications, and power are defined as: Remark 3. The operations in Definition 5 become valid for: (1) TSFSs: if we consider s l = s u , i l = i u , and d l = d u .
(3) SFSs: if we consider q = 2 and s l = s u , i l = i u and d l = d u .
(5) PFSs: if we consider q = 1 and s l = s u , i l = i u and d l = d u [52].(6) IVq-ROPFSs: if we consider i l = i u = 0. (7) q-ROPFSs: if we consider s l = s u , i l = i u and d l = d u .
(8) IVPyFSs: if we consider q = 2 and i l = i u = 0 [41,42].( 9) PyFSs: if we consider q = 2 and s l = s u , i l = i u = 0 and d l = d u [39,40] (Definition 3).( 10) IVIFSs: if we consider q = 1 and i l = i u = 0 [29,30].(11) IFSs: if we consider q = 1 and s l = s u , i l = i u = 0 and d l = d u [24,25].(12) IVFSs: if we consider q = 1 and i Theorem 2. The following properties hold true for A, B ∈ IVTSFS(X), where λ, λ 1 , λ 3 > 0. ( Proof.Trivial. The ranking of two numbers in fuzzy algebraic structures has a certain importance, especially in MADM problems, medical diagnostics problems, and in pattern recognition.There are several rules defined for the ranking of two numbers of a certain fuzzy algebraic structure, as discussed in Section 1 [1,2,38].Here, we follow the idea of Joshi and Kumar [38], to define a score function for an IVTSFN.Definition 6.For an IVTSFN I = (s I (x), i I (x), d I (x)) = s l , s u , i l , i u , d l , d u , the score function is defined as: Remark 4. Using the restrictions stated in Theorem 1, the score value for the TSFS, IVSFS, SFS, IVPFS, and PFS, as well as other fuzzy algebraic structures, can be obtained analogously.

Averaging Aggregation Operators for Interval-Valued T-Spherical Fuzzy Sets
In this section, some aggregation operators for IVTSFSs will be proposed.These operators include the IVTSFWA operator, IVTSFOWA operator, and IVTSFHA operator.The validation and basic properties of these aggregation tools will be studied and supported by numerical examples.In our study of aggregation, w = (w 1 , w 2 , w 3 , . . .w m ) T will denote the weight vector, such that Definition 7. The IVTSFWA operator for IVTSFNs I j (j = 1, 2, 3 . . .m) is of the form: Theorem 3. The aggregated value of IVTSFNs I j , using the IVTSFWA operator, is an IVTSFN which is given as: Proof.Following the tradition, this result can be proven using mathematical induction.For m = 2. and Hence, for m = 2, the result is true.Supposedly, we claim that the result is valid for m = k, i.e., To prove the result for m = k + 1, consider: Finally, we get: Hence, the result is valid for m = k + 1.So, using the induction method, it is proven that the result is valid for all m ∈ Z + .In the following theorem, we state that the IVTSFWA operator satisfies the basic characteristics of an aggregation operator.Theorem 4. For the IVTSFWA operator, the following properties hold true: (1) Idempotency: If I j = I for all j = 1, 2, 3, . . .m, then: for all j, then: (2) Boundedness: If I − = min j s j , i j d j and I + = max j s j , i j d j are the least and greatest IVTSFNs, then: For the two collections of IVTSFNs, I j and P j .If I j ≤ P j ∀ j, then: Proof.As IVTSFWA(I 1 , I 2 , I 3 . . .I m ) = w 1 I 1 + w 2 I 2 + w 3 I 3 + . . .w m I m and IVTSFWA(P 1 , P 2 , P 3 . . .P m ) = w 1 P 1 + w 2 P 2 + w 3 P 3 + . . .w m P m As I j ≤ P j ∀ j.So, IVTSFWA(I 1 , I 2 , I 3 . . .I m ) ≤ IVTSFWA(P 1 , P 2 , P 3 . . .P m ) In MADM problems, sometimes the ordered position of the information has importance and needs to be weighted.For this reason, the concept of the IVTSFOWA operator is proposed.Definition 8.The IVTSFOWA operator for IVTSFNs I j (j = 1, 2, 3 . . .m) is of the form: where I α(j) denotes the j th largest value of I j .
Theorem 5.The aggregated value of the IVTSFNs, I j , using an IVTSFOWA operator, is an IVTSFN and is given as: Proof.This result can analogously be proven, like Theorem 3.
As discussed, whenever the ordered position of IVTSFNs is necessary, we use the IVTSFOWA operator.If the importance of their argument also needs to be weighted, then we develop the IVTSFHA operator.I α(j) denotes the j th largest value of .I j , and further w = (w 1 , w 2 , w 3 . . .w n ) T is the weight vector of I j .Theorem 6.The aggregated value of the IVTSFNs I j , using the IVTSFHA operator, is an IVTSFN and is given as: Proof.This result can analogously be proven, similarly to the proof of Theorem 3.
I 4 , using the IVTSFHA operator, is given by: .

Geometric Aggregation Operators for Interval-Valued T-Spherical Fuzzy Sets:
In this section, some geometric aggregation operators for IVTSFSs are proposed.These operators include the IVTSFWG operator, IVTSFOWG operator, and IVTSFHG operator.The basic properties of these aggregation tools will be studied and supported by numerical examples.Definition 10.The IVTSFWG operator for the IVTSFNs I j (j = 1, 2, 3 . . .m) is of the form: Theorem 8.The aggregated value of the IVTSFNs I j , using the IVTSFWG operator, is an IVTSFN and is given as: Proof.Following the tradition, this result can be proven using mathematical induction.
For m = 2. and Hence, for m = 2, the result is true.
Based on this assumption, we claim that the result is valid for m = k i.e., To prove the result for m = k + 1, consider: Finally, we get: Hence, the result is valid for m = k + 1.Consequently, using the induction method, it is proven that the result is valid for all m ∈ Z + .
In the following theorem, we state that the IVTSFWG operator satisfies the basic characteristics of aggregation operators.Theorem 9.For an IVTSFWG operator, the following properties hold true.
(1) Idempotency: If I j = I for all j = 1, 2, 3, . . .m, then: If I − = min j s j , i j d j and I + = max j s j , i j d j are the least and greatest IVTSFNs, then: For the two collections of IVTSFNs, I j and P j , if I j ≤ P j ∀ j then: IVTSFWA(I 1 , I 2 , I 3 . . .I m ) ≤ IVTSFWA(P 1 , P 2 , P 3 . . .P m ) These results can be proven analogously.We have developed the IVTSFOWA operator to handle situations where the ordered position of the information is important.Now, the concept of the IVTSFOWG operator is proposed.Definition 11.The IVTSFOWG operator for IVTSFNs I j (j = 1, 2, 3 . . .m) is of the form: where I α(j) denotes the j th largest value of I j .
I α(j) denotes the j th largest value of .I j , andw = (w 1 , w 2 , w 3 . . .w n ) T is the weight vector of I j .
Theorem 11.The aggregated value of IVTSFNs I j , using the IVTSFHG operator, is an IVTSFN and is given as: Proof.This result can analogously be proven as similar to that of the proof of Theorem 8.
Now, the aggregated value of .

Multi-Attribute Decision-Making Investment Planning
MADM is one of the most suitable areas where the aggregation of the tools of fuzzy structures is applied to get useful results.A detailed literature survey of MADM problems has been discussed in Section 1.In this section, our aim is to develop the MADM method in the context of IVTSFSs.
In a MADM problem, the selection of the best or most suitable option is carried out using a list of options.Consider a list of m alternatives, denoted by A i , being observed by decision makers with k attributes, denoted by H k .The decision makers evaluated the m number of alternatives with k attributes and provided their information in the form of IVTSFNs.Furthermore, w = (w 1 , w 2 , w 3 , . . .w k ) T denoted the weight vector of the attributes.The detailed steps of the MADM process are given as: Step 1: The decision makers assess the alternatives, given the attributes, and provide their information in the form of a decision matrix.
Step 2: Apply the proposed aggregation tools to the decision matrix obtained in Step 1.
Step 3: Compute the scores of the IVTSFNs obtained in Step 2.
Step 4: Analyze the score values of the alternatives and rank them to obtain the best alternative.
The following example demonstrates the proposed MADM algorithm in detail.Example 6.A multinational company needed to announce its policy on its investment for the upcoming financial year.Keeping in mind its previous performance, the company needed to evaluate its financial policies to launch the best investment.It had four policies to be evaluated after some initial screening.These four policies included four possible places (countries) for investments i.e., A 1 : To invest in Pakistan, A 2 : To invest in Iran, A 3 ; To invest in the UAE, and A 4 : To invest in Bangladesh.Assuming that all of the attributes are of benefit, the four investment plans were evaluated based on the following attributes: H 1 : Comfort zone, H 2 : Government regulations, H 3 : Interest of the people, and H 4 : Competition in the markets.The attribute H 1 shows that evaluation policies are based on the law and considers the situation of the country for the investment.The attribute H 2 allows the decision makers to evaluate the policy, keeping in mind the relevant government policies that directly affect the business policies.The attribute H 3 allows the decision makers to evaluate the policy based on the cultural values and overall lifestyle of the people of the country, as any investment policy is directly linked to the consumers and distributors.The fourth attribute, H 4 , provides a chance for the decision makers to evaluate the policy by considering the competition in the market.If the competition in the market is low, then the success of the policy may be assured.All of the four factors had a great impact on the success of the policy and the decision makers provided their evaluations with all four attributes in mind.Let w = (0.22, 0.34, 0.27, 0.17) T be the weight vector of the attributes.The policy makers gave their opinions in the form of IVTSFNs, as follows.
The description of imprecise information, in terms of intervals instead of crisp numbers, provides consistent and improved results numerically, as described in Section 3. Furthermore, the description of imprecision using the four membership grades, i.e., membership, abstinence, non-membership, and the refusal degree, improves the accuracy of the human opinion about an uncertain event.Therefore, the evaluation of the investment policy, in this case, is studied in the environment of IVTSFSs, using the WA and WG aggregation operators.The stepwise demonstration of the MADM process is as follows: Step 1: The evaluation of alternatives, A i , by the decision makers in the form of decision matrix D ij .
The selection of the best location for investment is carried out using two approaches.Firstly, by using the IVTSFWA operators and secondly, by using IVTSFWG operators.It can be seen that all of the values in the decision matrix are IVTSFNs for q = 5.For a lesser q, some values are not IVTSFNs.Therefore, we take q = 5.
Step 2: By applying the IVTSFWA operators to the decision matrix provided in Step 1, we get: The ranking analysis shows that A 3 has the greatest value, hence the policy of making investments in the UAE is the best, according to the proposed decision-making method using the IVTSFWA operators.Now, the same data is analyzed to find the best policy of investment using IVTSFWG operators.
Step 1: We use the same evaluation of alternatives, A i , in the form of decision matrix D ij as above.
Step 2: By applying the IVTSFWG operators to the decision matrix provided in Step 1, we get: Step 3: This step involves the computation of the score values as: SC(A 1 ) = 0.0520, C(A 2 ) = 0.0993, SC(A 3 ) = 0.1263, and SC(A 4 ) = 0.0589 Step 4: In this step, the score values obtained in Step 3 are analyzed.Based on the score values, the ranking of alternatives is given as: The ranking analysis shows that A 3 has the greatest value, thus the policy of making investments in the UAE is the best, according to the proposed decision-making method using IVTSFWG operators.Hence, in this case, we obtain the same results by using IVTAFWA operators as we do by using IVTSFWG operators.However, we will not necessarily always obtain the same results using different aggregation tools, i.e., the results obtained using IVTSFWA and IVTSFWG operators may differ.Thus, this type of information cannot be processed by using the pre-existing aggregation tools because of their limited structures.Our proposed aggregation operators, on the other hand, can aggregate such types of information.The other interesting fact is that the information provided in this problem is similar to human opinion, as it describes the degree membership, abstinence, non-membership, and the refusal degree.Furthermore, if we used only a single crisp value for each membership grade instead of intervals, then the result would drastically change, as illustrated in Section 3.

Consequences of the Proposed Work and a Comparative Study
The aim of this section is to analyze some consequences of our proposed work.It can be seen that, in some fuzzy algebraic structures, work on the aggregation tools is yet to be initiated.Therefore, some weighted averaging and weighted geometric aggregation tools for other fuzzy algebraic structures will be proposed.If the aggregation tools of a fuzzy framework already exist, then those aggregation tools will be compared with the new proposed aggregation tools.
IVTSFWA(I 1 , I 2 , I 3 . . . (1) If we use s l = s u = s, i l = i u = i, and d l = d u = d, then the weighted averaging and the weighted geometric aggregation operators of TSFSs are obtained and are given as: (2) If we use q = 2, then the weighted averaging and the weighted geometric aggregation operators of IVSFSs are obtained and are given as: (1) If we use q = 2, s l = s u = s, i l = i u = i, and d l = d u = d, then the weighted averaging and the weighted geometric aggregation operators of SFSs are obtained and are given as: (2) If we use q = 1, then the weighted averaging and the weighted geometric aggregation operators of IVPFSs are obtained and are given as: (3) If we use q = 1, s l = s u = s, i l = i u = i, and d l = d u = d, then the weighted averaging and the weighted geometric aggregation operators of PFSs are obtained and are given as: PFWA(I 1 , I 2 , I 3 . . . This type of MADM problem can easily be solved by placing q = 1, s l = s u = s, i l = i u = i, and d l = d u = d into the proposed IVTSFWA operator, i.e., by using Equation (15).

Advantages
In this section, the advantages of the proposed new aggregation tools over the pre-existing aggregation tools are discussed and further demonstrated with a numerical example.
If we consider Example 6 of Section 7, it becomes quite clear that none of the existing aggregation tools used in Equations ( 9) to (30) of the fuzzy algebraic frameworks could solve the data involved in that problem, thus showing the limitations of the existing operators.
On the other hand, if we consider an example in the context of the existing fuzzy structure, then such a problem can easily be solved by using the proposed aggregation tools of the IVTSFSs (by using Equations ( 7) and ( 8)).For instance, consider a decision matrix of four alternatives and three attributes in the MADM discussed by Garg [10].
Here, the four alternatives denote four possible policies of investment and our aim is to find the best policy.Now, this problem can easily be solved using the aggregation operators of the IVTSFNs (using Equations ( 7) and ( 8)) by including q = 2 and i l = i u = i = 0.The IVTSFWA operator for q = 2 and i l = i u = i = 0, as discussed in Equation ( 23 Using the score function, we get: Hence, the score values show that A 2 is the best policy to be implemented.This result is well in accordance with the results obtained by Garg [10].Therefore, the claim that the IVTSFWA and IVTSFWG operators can deal with data in the form of pre-existing fuzzy structures is proven to be true.

Conclusions
The concept of the IVTSFS is defined and its novelty and significance are demonstrated.The basic operations of IVTSFSs are developed and, with the help of some restrictions, it is shown that the proposed new operations are more applicable than the existing ones.The theory of aggregation operators for IVTSFSs have also been developed as some weighted averaging and weighted geometric aggregation operators have been introduced.The validity of the averaging and geometric aggregation operators was analyzed using the induction method and the characteristics of the monotonicity, boundedness, and idempotency were studied.Some ordered weighted averaging (geometric) and hybrid averaging (geometric) aggregation operators were also developed, keeping in mind the ranking of importance.Adhering to some restrictions over the proposed work, aggregation operators for IVq-ROPFSs, q-ROPFSs, and IVPFSs were also developed.The MADM method in the context of the IVTSFS was established and a numerical example was solved using both IVTSFWA and IVTSFWG operators to understand the proposed MADM method.The advantages of the new proposed work are discussed with the help of examples.It is clearly explained that the concept of the IVTSF can process the information which is sufficiently close to human nature, but it can also handle the information provided in the context of IFSs, PFSs, PyFSs, q-ROPFs, IVIFSs, IVPyFSs, and IVq-ROPFS.On the other hand, none of the pre-existing operators could process such information.In the future, we aim to develop some similarity, as well as distance, measures for IVTSFSs and study their usefulness in pattern recognition, MADM, and clustering.Furthermore, the McLaurin symmetric mean operator and the Bonferroni mean operator can also be developed for IVTSFSs.We also aim to develop the idea of Einstein and interactive operators for IVTSFSs and to study their viability in MADM for future research.