Recent Trends in the Foliar Spraying of Zinc Nutrient and Zinc Oxide Nanoparticles in Tomato Production

: Growing vegetables can be seen as a means of improving people’s livelihoods and nutritional status. Tomatoes are one of the world’s most commonly planted vegetable crops. The nutritional arrangement of the tomato depends on the quantity and type of nutrients taken from the growing medium, such assoil and foliar application; therefore, an adequate amount of macro- and micro-nutrients, including zinc (Zn) and zinc oxide nanoparticles (ZnO-NPs), are crucial for tomato production. Zinc foliar spraying is one of the effective procedures that may improve crop quality and yield. Zinc oxide nanoparticles (ZnO-NPs) are represented as a biosafety concern for biological materials. Foliar application of Zn showed better results in increasing soluble solids(TSS), ﬁrmness, titratable acidity, chlorophyll-a, chlorophyll-b, ascorbic acid, amount of lycopene. Researchers have observed the effect of nanoparticles of zinc oxide on various crops, including tomatoes. Foliar spraying of ZnO-NPs gave the most inﬂuential results in terms of best planting parameters, namely plant height, early ﬂowering, fruit yields as well as lycopene content. Therefore, more attention should be given to improving quantity and quality as well as nutrient use efﬁciency of Zn and ZnO-NPs in tomato production. Recent information on the effect of zinc nutrient foliar spraying and ZnO-NPs as a nano fertilizer on tomato productivity is reviewed in this article.


Introduction
Vegetable production can be espoused as an effective tool for maintaining the lifestyle and nutritional status of the people. Tomatoes are one of the most widely grown, valuable, and consumed vegetables in the world, ranking second only to potatoes in terms of consumption [1]. It is measured as a perennial crop, but in the case of commercial productions, it is considered as a self-crossing annual crop [2]. Tomato (Solanum lycopersicum) is a popular vegetable crop and a good source of protein, calcium, iron (Fe), sodium (Na), potassium (K), magnesium (Mg), vitamin A, vitamin C, antioxidant and carotenoids, which help to prevent cancer and degenerative diseases [3]. Studies show that Zn plays a vital role in achieving higher yields and better quality of tomato. Several studies have noted that Zn is a vital nutrient element, which is required by all living organisms, and it ranks 23rd on the planet and is the second most abundant transition metal, following iron [4,5]. Zinc is an essential trace element in various plant functions, such as increasing the rate of enzymes, chlorophyll, antioxidants, and is a necessary constituent of numerous proteins [6]. Foliar application can expand the yield contributing character, fruit set, and fruit yield of tomato through photosynthesis of green plants [7].

Importance of Tomato
Tomato is one of the widespread fruiting-vegetable crops, which is grown throughout the world, and it stands in the second position behind potato in considering area, but in the case of a processing crop, it bears first-place worldwide [19]. It is categorized as an annual crop, planted in the warm period of a year with an average optimal rising temperature between 25 • C to 29 • C. Moreover, tomato relishes a significant position considering their nutritional value. Approximately 100 g of tomato fruits contain calcium 48 mg, ascorbic acid 27 mg, phosphorus 20 mg, carbohydrates 3.6 g, proteins 0.9 g, fiber 0.8 g, iron 0.4 g, fats 0.2 g, and energy 20 K cal. Tomato also encompasses lycopene pigments and β-carotene, where lycopene is the indicator of its red color. Tomatoes also preserve the blood vessels in good condition and protect them from scurvy diseases [20]. Tomato shows a major role in the human diet due to its rich source of lycopene, vitamins viz. ascorbic acid, and β-carotene, which are antioxidants and minerals, such as calcium [21]. In terms of human health, it is a prime component in the everyday diet due to it constituting a vital source of minerals, vitamins, and antioxidants [22]. Emphasis has recently been given to tomato in terms of their role in the recovery from different types of diseases. This attention is owing to the existence of carotenoids and particularly lycopene, which is an unsaturated allylic compound that performs by diminishing cellular aging and inhibiting cardiovascular risk, cancer, and others [23,24]. Tomatoes can be used in varied ways in the kitchen, e.g., ketchup, juice, pulp, etc. [25]. Tomato is an important crop in many markets around the world.
Nevertheless, the cost price and the quality are still considered as a great challenge due to varied global temperature and soil conditions [26].

Importance of Foliar Fertilization
Foliar application ( Figure 1) is a method of plants nutrition that involves directly applying liquid fertilizer to the leaves rather than the soil. Foliar fertilization represents the application of nutrients by spraying to the plants' leaves and stems for absorption. The foliar fertilizers enhance the plant's yield, reduce diseases and pest infestation, influence drought tolerance as well as improve crop quality. The plant can only absorb a certain quantity of nutrients supplied by foliar spraying, so the foliar application should be applied as a supplementary form of nutrients but not replacing the basal dose of fertilizers. Conditions for the application of foliar fertilizers are as follows: 1.
Foliar spraying should be in the early morning and late afternoon because the humidity is higher, and the leaves of plants are in a full turgor condition with their cells full of water.

2.
Foliar spraying should be avoided during the warm hours of the day; plants can only absorb nutrients in a limited amount at high temperatures.

3.
Foliar spraying should be applied under minimum wind conditions. 4.
It should be sprayed at a time of sufficient soil moisture condition when leaves will be turgid and become less water-stressed, so irrigation is better before spraying.
The optimum pH of foliar spray is slightly acidic (5 ± 0.5).

7.
A suitable wetting agent or surfactant for minimizing the surface tension of the spray droplets should be used, which ultimately maintain the proper distribution of the droplet, increase the wetted surface area, decrease the burning of the leaves as well as improve nutrient uptake by plants. 8.
It should be ensured that the fertilizer is in a fully soluble condition [27].
The situation of nutrient uptake in the soil is not always entirely effective because of leaching, soilfixations, blockages, and other losses. These problems can be minimized by arranging foliar application. There are several advantages of foliar fertilizers because of three following main reasons: 1. Foliar fertilization is more efficient because the chelated nutrients are fully plant available. 2. It promotes the growth of the plants even in less favorable weather conditions. 3. It is an environmentally friendly solution [28]. On the other hand, bio stimulants act as an additive to the fertilizer and give support for the uptake of nutrients, enhance plant growth, and improve tolerance to abiotic stress. These cannot serve as fertilizers because of their inability to supply nutrients directly to the plants. These may assist the gain of nutrients by enhancing metabolic processes in the soil and plants [29]. Foliar fertilization can supply nutrients directly to the plant, so this method is better than bio stimulant applications.
The most effective foliar applications are when a plant lacks nutrients. Narimani and colleagues observed that the foliage application of microelements could increase the competence of micronutrient activities [30]. Bozoglu et al. [31] identified that foliar spraying of Zn could enhance higher yield attributes, yield, and quality of chickpea.
Foliar application of micronutrients is one of the most effective tools in terms of the quick response of microelements when roots fail to provide adequate supply [32]. Foliar spraying of microelements is a more appropriate approach than those of the soil application because of its various activities, such as overcoming nutrient deficiency quickly, relaxed application, decreasing the toxicity created by the accumulation in the roots, and stopping nutrient fixation by the soil [16]. Micronutrients have an impressive action in the development of different plant parts as well as and foliar spraying of these micronutrients can increase the vegetative and reproductive growth, setting of fruit, quality, and yield attributes of tomato by ensuring the photosynthesis effects of green plants [7]. So, the foliar spraying is the real method to nourish the tomato crop by enriching the growth, quality, yield contributing characters, and remarkable yield [17]. It is noted that balanced fertilization of major and minor nutrients can improve the production of crops, where foliar spraying of micronutrients is not only an effective approach but also a secured system of fertilizer application [33,34]. Therefore, foliar spraying is a more applicable method than soil application for quick nutrient uptake [35]. The situation of nutrient uptake in the soil is not always entirely effective because of leaching, soilfixations, blockages, and other losses. These problems can be minimized by arranging foliar application. There are several advantages of foliar fertilizers because of three following main reasons: 1. Foliar fertilization is more efficient because the chelated nutrients are fully plant available. 2. It promotes the growth of the plants even in less favorable weather conditions. 3. It is an environmentally friendly solution [28]. On the other hand, bio stimulants act as an additive to the fertilizer and give support for the uptake of nutrients, enhance plant growth, and improve tolerance to abiotic stress. These cannot serve as fertilizers because of their inability to supply nutrients directly to the plants. These may assist the gain of nutrients by enhancing metabolic processes in the soil and plants [29]. Foliar fertilization can supply nutrients directly to the plant, so this method is better than bio stimulant applications.
The most effective foliar applications are when a plant lacks nutrients. Narimani and colleagues observed that the foliage application of microelements could increase the competence of micronutrient activities [30]. Bozoglu et al. [31] identified that foliar spraying of Zn could enhance higher yield attributes, yield, and quality of chickpea.
Foliar application of micronutrients is one of the most effective tools in terms of the quick response of microelements when roots fail to provide adequate supply [32]. Foliar

Importance of Zinc Nutrient on Tomato Plants
Zinc is an essential micronutrient that enhances enzyme reactions similar to manganese and magnesium, and it can improve the effectiveness of photosynthesis and enhance the antioxidant system of tomato plants [36]. In addition, in conjunction with boron, Zn aids in the synthesis of auxin, growth of cell walls, and cellular proliferation in plants [37]. Zn plays a key role in managing the generation and detoxification of free oxygen radicals, which can damage membrane lipids and sulfhydryl groups, and it is also necessary for the production of the carbonic anhydrase enzyme which supports the transport of CO 2 throughout photosynthesis [38].
Furthermore, Harris and co-workers found that Zn is responsible for RNA metabolism, encouraging the formation of carbohydrates, proteins, and DNA, increased seed generation, fruit set, the number of fruits per plant, fruits' length and diameter, fruits' dry weight, the sum of seeds per fruit, and seed yield per plant [13]. The maximum number of fruits per cluster, fruit set, fruit weight, number of fruits per plant, fruit yield per plant, higher total soluble solids (TSS), and vitamin C were increased by the application of zinc nutrients in the tomato plant [39]. Abedy [40] reported that this micronutrient has also displayed a key role in precipitating photosynthesis and related enzymes, which are responsible for increasing sugar and decreasing acidity. The deficiency of Zn also affects the growth of various crops. The maximum TSS, chlorophyll-a, chlorophyll-b, vitamin C, flavonoids, carotenoids, and phenolics were recorded in plants treated with the application of zinc nutrients at 30 ppm in the tomato plant [41]. Passam and other fellow plant workers [42] also identified various malformations, such as shorter and thinner internodes, stunted growth, chlorotic spots on older flooring, and the upward twisting of the leaf borders in Zn-deficient plants. The maximum plant height (cm), number of branches per plant, number of leaves per plant, first day flowering at 29.68 days, number of fruits per plant (28.33), fruit weight per plant (1.38 kg), and fruit yield flowering at 29.68 days, number of fruits per plant (28.33), fruit weight per plant (1.38 kg), and fruit yield (51.12 t ha −1 ) were obtained under 10 Zn kg ha −1 [43].Sultana et al. [16] also found that the tomato yield, both quantity and quality, meaningfully responded to foliar spraying of B and Zn nutrient. They also observed that foliar fertilization, consisting of Zn and B at 0.05% and 0.03%, respectively, accomplished the maximum fruit yield (85.5 t ha 1 and 81.7 t ha −1 in 2013 and 2014, respectively), while the control cropping plot achieved 66.8 and 60.7 t ha −1 in 2013 and 2014, respectively.

Effect of Zinc Sulfate Fertilizer on Tomato
Until now, various experiments have been carried out to observe the effect of ZnSO 4 fertilizer on the tomato plant. In an experiment by Harris and co-workers [13], at 80 and 95 days after transplant, the highest plant height was observed in the combined application of H 3 BO 3 (350 ppm) along with ZnSO 4 (350 ppm). Recently, Haleema and colleagues [44] showed that, with a foliar application of 0.5% Zn, maximum tomato plant height (86.53 cm), number of primary branches (2.53) and secondary branches (6.42), leaves per plant (167), leaf area (63.33 cm 2 ), and fruits per plant (63.78) were attained.
The fruit yield of two tomato variants, VCT-1 and Rio Grande, was improved by 39% and 54% over the control variant with the application of Zn at 10 mg/kg soil, whereas the yield of tomatoes was improved by 34 and 48%, respectively, at 15 mg kg −1 of soil application. Therefore, it has been suggested that soil application at 10 ppm has a positive impact on the yield and quality of fruits, biochemical composition, and enzymatic features of both variants [45]. In 2014, Shnain and colleagues [46] obtained a higher number of leaves in tomatoes at a combined concentration application of Zn (1250 ppm) and B (1250 ppm).
The greatest plant height (106.9 cm), quantity of leaves per plant (68.9), surface area of the leaf (48.2 cm 2 ), number of clusters per plant (21.6), number of branches per plant (11.9), number of fruits per cluster (1.8), amount of fruits per plant (33.6), fruit length (5.3 cm) and diameter (5.1 cm), fruit weight (60.4 gfruit −1 ), and yield (1.9 kgplant −1 , 25.7 kgplot −1 and 58.3 t ha −1 ) were also reported for the combined application of foliar spray with 12.5 ppm ZnSO 4 and 12.5 ppm H 3 BO 3 , whereas the lowest outcomes were observed in the control group [47]. Ullah et al. [48] also reported that the number of flower-bunches per plant (27.45), number of flowers per bunch (5.66), number of fruits per bunch (4.57), number of branches per plant (7.36), and yield (23.40 t ha −1 ) of tomato had maximum outcomes with an application of 0.4% Zn foliar spray. Singh and Tiwari [49] also observed an increasing number of tomato-plant leaves with the foliar application of Zn and B. The use of Zn and B together also can increase the number of tomatoes per plant [50]. The foliar application of Zn (50 ppm) can enlarge the length of roots at 105 days in tomatoes [51]. It was found that the vegetative and reproductive growths of tomatoes were significantly enhanced by the combined application of Fe (200 mg L −1 ) and Zn (100 mg L −1 ). The combination resulted in the plant's maximum height (124.14 cm), branches per plant (8.36), per-cluster flower count (18.14), per-cluster fruits count (8), numbers of fruits per plant (90.14), the average weight of fruits (95.14 g), SPAD guided chlorophyll content (22.14 µmol), and yield (25.14 t ha −1 ) [52].
A field experiment was conducted by Naga Sivaiah et al. [53] for measuring the influence of the foliar application of micronutrients in two tomato varieties: Utkal Kumari and Utkal Raja on vegetative and reproduction growth attributes. The maximal growth of the plant (85.7%) was observed 30 days to 70 days after transplantation, following the application of a blend of micronutrients (78.2%) with 100 ppm foliar treatment, including B, Zn, molybdenum (Mo), copper (Cu), Fe, manganese (Mn), and B foliar application (77.5%) at 100 ppm.
Datta Reddy et al. [54] experimented with the outcome of foliar application of six micronutrients (Zn, Mo, B, Cu, Mn, and Fe) on growth and yield parameters in two tomato varieties (e.g., Arkasourabh and Arkavikas). They found that mixed application of all micronutrients (250 ppm) except Mn (50 ppm) showed better plant growth patterns in terms of plant height, the number of compound leaves, and yield parameters (e.g., tender and mature fruits per plant) over the control samples. Dixit et al. [17] also reported another experiment and best outcomes after the combined foliar application of FeSO 4 (0.2%), CaNO 3 (0.2%), B (0.1%), and ZnSO 4 (0.2%) spray in terms of maximum plant height, plant girth, the number of fruits per plant, fruit length and diameter, fruit weight, and per-plant yield compared to the control group of plants. Various researchers found Zn significantly influences different parameters, which are mentioned in the following Table 1.

Effect of ZnO-NPs on Tomato Production
Nanoparticles are made from organic and inorganic nanomaterials. Their synthesis also varies in terms of physical or chemical methods. The inorganic nanomaterials include the metal oxides, such as ZnO, TiO 2 , MgO, and AgO, and others. On the other hand, the organic nanomaterials include lipids, polymers, and carbon nanotubules. Nanoparticles of different materials are usually four types, i.e., silver, gold, alloy, and magnetic. In this regard, nanofertilizers are classified on the basis of nutrient categorization. Therefore, there are classically two types of nanofertilizers, i.e., micronutrient nanofertilizers and macronutrient nanofertilizers [56].The components of nanofertilizers may include zinc oxide nanoparticles (ZnO-NPs), silica, iron, and titanium dioxide, ZnS/ZnCdSe core-shell quantum dots (QDs), InP/ZnS core-shell QDs, Mn/ZnSeQDs, gold nanorods, Al 2 O 3 , TiO 2 , CeO 2 , and FeO [57]. These nanofertilizers are synthesized following the specific method from the respective chemicals. For example, Zn nanofertilizers are synthesized from ZnO, and Fe nanofertilizers are synthesized from Fe 2 O 3 .
Recently, researchers have observed the effects of nanoparticles of zinc oxide, Zn-NPs, on various crops, including tomatoes. The acceptance of nanoparticles by plants is influenced by various factors, such as the nature of the particles as well as the interaction of NPs with the environment and the physiological condition of the plant (Figure 2).  The effects of different Zn and ZnO-NPs concentrations in tomatoes and wheat were evaluated by Amooaghaie et al. [59]. Results showed that Zn and ZnO-NPs help in germinating seeds and boosting growth parameters at lower concentrations, while NPs decrease these characteristics at higher concentrations. However, dissolved zinc (3-23 The effects of different Zn and ZnO-NPs concentrations in tomatoes and wheat were evaluated by Amooaghaie et al. [59]. Results showed that Zn and ZnO-NPs help in germinating seeds and boosting growth parameters at lower concentrations, while NPs decrease these characteristics at higher concentrations. However, dissolved zinc (3-23 mg L −1 ) to form NPs had no significant impact on either of the species' germination factors. Among different concentrations of ZnO-NPs, foliar spraying at 50 ppm gave the maximum result in the case of shoot length (30.1%), shoot fresh mass (27.7%), shoot dry mass (29.0%), root length (28.7%), root fresh mass (26.1%), root dry mass (24.6%), and leaf area (24.1%), SPAD chlorophyll content (32.1%), the fruit number per plant (21.1%), and fruit yield (19.4%) over control [36]. Rosa and co-workers [60] presented that the germination percentage was reduced by 20% with the application of ZnO-NPs (1600 mg L −1 ) over control, and root growth of seedling also decreased by 50%with the application of 800 and 1600 mg L −1 of ZnO-NPs over control. On the other hand, seedling sincreased the biomass production by 35% over control when seeds were germinated with 800 mg L −1 .
Tomato seeds responded variably towards the treatment at different concentrations of ZnO-NPs. Seed treated with the application of 400 ppm ZnO-NPs recorded significant germination (93.33%) and Seedling Vigor Index (919.80). Actually, the application of 400 ppm ZnO-NPs represented the maximum result, and after that, higher concentrations showed decreased seedling vigor index [61].
Zinc oxide nanoparticles have a positive impact on salt tolerance. Hosseinpour et al. [62] reported that the application of ZnO-NPs at 40 ppm could be mitigated salinity stress in tomato seedlings. They mentioned that the flag leaf width, plant height, stem diameter, leaf fresh weight, leaf dry weight, root fresh weight, and root dry weight found higher values in salinity stress with the application of 40 mg L −1 ZnO-NPs with Lactobacillus casei and the lowest results of that were recorded under 250 mM NaCl stress (Figure 3).
Agronomy 2021, 11, x FOR PEER REVIEW 9 of 16 nation percentage was reduced by 20% with the application of ZnO-NPs (1600 mg L −1 ) over control, and root growth of seedling also decreased by 50%with the application of 800 and 1600 mg L -1 of ZnO-NPs over control. On the other hand, seedling sincreased the biomass production by 35% over control when seeds were germinated with 800 mg L -1 Tomato seeds responded variably towards the treatment at different concentrations of ZnO-NPs. Seed treated with the application of 400 ppm ZnO-NPs recorded significant germination (93.33%) and Seedling Vigor Index (919.80). Actually, the application of 400 ppm ZnO-NPs represented the maximum result, and after that, higher concentrations showed decreased seedling vigor index [61].
Zinc oxide nanoparticles have a positive impact on salt tolerance. Hosseinpour et al. [62] reported that the application of ZnO-NPs at 40 ppm could be mitigated salinity stress in tomato seedlings. They mentioned that the flag leaf width, plant height, stem diameter, leaf fresh weight, leaf dry weight, root fresh weight, and root dry weight found higher values in salinity stress with the application of 40 mg L −1 ZnO-NPs with Lactobacillus casei and the lowest results of that were recorded under 250 mM NaCl stress (Figure 3). The maximum number of flowers was recorded by applying foliar spraying@ 250 ppm ZnO-NPs over control which indicates that the foliar spraying could be used as an effective way to deliver nutrients to plants. These nanoparticles also produced 81.9% more tomato fruit (by weight) than the control at 66 days after the seeding of tomato [63]. Tomato plants that were treated with hexagonal morphology and superficially modified ZnO-NPs had significantly enhanced plant height, stem diameter, and plant organs (leaves, stem, and root) dry weights [64].
The results from a group of researchers revealed that foliar spraying of ZnO-NPs significantly increased shoot length (SL) and root length (RL), biomass, leaf area, chlorophyll content, and photosynthetic attributes of tomato plants in the presence of salt stress. Moreover, the application of ZnO-NPs mitigated the negative impacts of salt stress on tomato growth and enhanced protein content under salt stress. Therefore, ZnO-NPs may be used to enhance the growth performance and mitigate the unfavorable effects of NaCl in the tomato plant [65].
There are also several effects of ZnO-NPs on other crops. Many studies have shown that ZnO-NPs can improve plant growth and development in peanut and onion but that The maximum number of flowers was recorded by applying foliar spraying@ 250 ppm ZnO-NPs over control which indicates that the foliar spraying could be used as an effective way to deliver nutrients to plants. These nanoparticles also produced 81.9% more tomato fruit (by weight) than the control at 66 days after the seeding of tomato [63]. Tomato plants that were treated with hexagonal morphology and superficially modified ZnO-NPs had significantly enhanced plant height, stem diameter, and plant organs (leaves, stem, and root) dry weights [64].
The results from a group of researchers revealed that foliar spraying of ZnO-NPs significantly increased shoot length (SL) and root length (RL), biomass, leaf area, chlorophyll content, and photosynthetic attributes of tomato plants in the presence of salt stress. Moreover, the application of ZnO-NPs mitigated the negative impacts of salt stress on tomato growth and enhanced protein content under salt stress. Therefore, ZnO-NPs may be used to enhance the growth performance and mitigate the unfavorable effects of NaCl in the tomato plant [65].
There are also several effects of ZnO-NPs on other crops. Many studies have shown that ZnO-NPs can improve plant growth and development in peanut and onion but that ZnO-NPs have an advantageous effect on seed germination at low ZnO concentration [66,67]. Thunugunta et al. [68] discovered that ZnO-NPs had no toxic impact on plant growth characteristics in the soil medium but rather increased plant growth of eggplant. They also found that shoot length, leaf length, and leaf width, along with plant mass was shown to be a little bit responsive at a lower concentration of ZnO-NPs, 5 mg kg −1 . However, these specifications improved with increasing ZnO-NPs concentrations up to 15 mg kg −1 and then declined with subsequent applications of further ZnO-NPs, such as20 and 100 mg kg −1 .
The results of tomato plants after applying similar doses of nano fertilizers and regular fertilizers are presented in the following table (Table 2).

Impact of Zinc Sulfate Fertilizer on Tomato Crops' Nutritional Quality
Crops require nutrients in order to grow and produce at a high level. Fertilizers and micronutrients help crop nutrition by identifying crops that are well-adapted to low soil fertility or are particularly efficient at utilizing nutrients. Improved crop nutrient management can boost macro-and micronutrient bioavailability in crops and grains, which is essential for optimal crop growth and yield quantity and quality. Essential nutrients, along with water, sunshine, and favorable soil conditions, are important for improving crop production and plant resistance to climate change [71].
Gurmani and colleagues [45] noticed that the application of Zn (10-15 mg kg −1 ) considerably enhanced superoxide dismutase and peroxidase catalase activity in fruits of tomato. Meena et al. [73] observed significant results in the quality parameters of tomatoes. They found thatthe maximum pericarp thickness, ascorbic acid content, percentage of total sugar, and reducing sugar andnon-reducing sugar were recorded by the application of 100 ppm zinc along with boron.
In 2017, Chand and Prasad [74] documented the maximum diameter and dry matter of fruits after the application of B, ZnSO 4 , and CuSO 4 at 100 ppm level as compared to the control as well as other treatments. The TSS in tomato fruits were maximum (5.82 • Brix and 5.54 • Brix) under a combined spray of 250 ppm of B, Zn, and Cu. The maximum increase in the ascorbic acid content of tomato fruits (25.29 mg100 −1 g and 24.41 mg100 −1 g) was recorded with the application of Zn, B, and Cu at 250 ppm, which has accounted for a 62.39% increase (14.45 mg100 −1 g and 13.78 mg100 −1 g) compared to the control.
Similarly, zinc sulfate fertilizer has a significant impact on the nutritional quality of other crops. The application of ZnSO 4 can also increase the TSS level in guava fruit [77]. Additionally, Singh and co-workers reported that the weight and number of the raceme, TSS, and the juice content of grapevine were increased with the application of ZnSO 4 [78]. When a Zn (0.8%) and B (0.8%) mixture was applied on the Cape Goose Berry tree, fruit quality was improved by increased acidity, TSS, ascorbic acid content compared to the control [79].
It was found in one of the experiments by Kazemi and co-workers [80] that different applied treatments significantly corresponded to higher vegetative growth and fruit quality in cucumber plants. According to the findings, Zn (50 mg L −1 ) and Fe (100 mg L −1 ) increased chlorophyll content and yield. The effect of Zn and Fe was positive, with major increases in fruit quality, at 50 mg L −1 and 100 mg L −1 of Zn and Fe, respectively.

Effect of ZnO-NPs on the Nutritional Quality of Tomato
ZnO-NPs have potential effects on promoting agricultural productivity. The effect of NPs on crops varies with the species and age as well as doses and characteristics of the NPs. ZnO-NPs lessened the effects of NaCl by the accumulation of superoxide dismutase (SOD)and glutathioneperoxidase(GPX) in tissues of tomatoes, and a lower concentration (15 mg L −1 ) is more effective than a higher concentration (30 mg L −1 ) for tomato plants [81]. Wang and colleagues [12] also demonstrated in their experiment that ZnO-NPs boosts the antioxidant activities of enzymes and the transcriptions process of relevant genes, and these NPs only had a toxic effect on tomato plants at higher concentrations (e.g., 400 and 800 mgdm −3 ) but at low concentrations (upto 200 mgdm −3 ) there was no detrimental effect on plant growth.
The foliar spraying of ZnO-NPs gave a significant response in the case of nutritional quality parameters of tomato. The maximum activity of catalase (60%), peroxidase (74%), and superoxide dismutase (55%) were recorded in the plant to which 50 ppm of ZnO-NPs was applied. On the other hand, fruits grown from ZnO-NPs treated plants had a higher content of lycopene and β-carotene as compared to control plants. The maximum results were also found in the case of lycopene (23%) and β-carotene (25%) content with treatment at 50 ppm ZnO-NPs [36]. The total soluble solids were increased by 26.92% with the application of phytonanoparticles at 50 ppm over control [82]. The maximum activity of different enzymes was noted in the plants treated with ZnO-NPs at 8 mg L −1 for 30 min. The activity of CAT increased by 69.7%, POX by 65.0%, and SOD by 80% compared with the control plants [83].
A group of researchers investigated the effects of ZnO-NPs on tomato growth indices and antioxidant defense system activity under tomato mosaic tobamovirus (ToMV) stress.
The application with 100 ppm ZnO-NPs showed remarkably increased growth indices, photosynthetic attributes, and enzymatic and non-enzymatic antioxidants, which may be a hopeful strategy to overcome ToMV infections [69]. Lycopene, an antioxidant, is an important nutritional parameter in tomato fruits. The lycopene content was increased by 113.1% in fruits obtained from plants treated with 100 ppm ZnO nanoparticles by foliar application [63]. The application of ZnO-NPs mitigates the negative impacts of salt stress on tomato growth and enhances protein content and antioxidative enzyme activity, such as peroxidase (POX), superoxide dismutase (SOD), and catalase (CAT) under salt stress [66].
Foliar spraying with ZnO-NPs @ 100 ppm increased the levels of sucrose, starch, and glucose in tomato plants [70].
ZnO-NPs has a significant influence another crops. It was reported that the application of zinc nano fertilizerenhances enzyme activities of acid phosphatase (76.9%), alkalinephosphatase (61.7%), phytase (322.2%), and dehydrogenase (21%) were observed over control. These phosphorous mobilizing enzymes assist in the mobilization of native phosphorous existing in the rhizosphere in the complex form with calcium, iron, or aluminum [84]. Compared to control, the electrolyte leakage (EL) was reduced in both shoots and roots with the application of ZnO-NPs than control in wheat [11]. Nanoparticles had significantly enhanced the superoxide dismutase (SOD) and peroxidase (POD)activities in wheat leaves. With the application of 100 mg L −1 ZnO-NPs, the SOD and POD activities increased by 47% and 50%, respectively, over the control [85]. The seed treatment and Zn-source concentration significantly affected the plant quality parameters of the fodder maize crop. The application of ZnO-NPs (at 40 mg L −1 concentration) exhibited significantly higher neutral detergent fiber (NDF) and cellulose content as compared to control [86].
The impact of fertilizers on tomatoes and other crops is mentioned in the following Table 3.

Conclusions
According to the data presented above, it has been confirmed that there is a notable positive trend toward the commercialization of a new Zn and ZnO-NPs foliage fertilizer on tomato production. The foliar application of Zn has a vast influence on the tomato plant.
The maximum numbers of fruit per cluster, percentage of fruit set, individual fruit weight, the quantity of fruit per plant, fruit yield per plant, chlorophyll content, higher TSS, vitamin C, and lycopene content were observed after the application of Zn spray. For optimizing crop activities to foliage nutrient sprays, more studies on foliar fertilization of tomato crops must be conducted in the coming future. Such types of experiments may incorporate the foliar application of Zn fertilizer as an effective tool and create environmentally friendly tomato production. On the other hand, nanotechnology also contributes to enhancing crop yields by improving fertilizer use efficiencies. The NPs articulate their distinctive features by being smaller, having highly defined outside areas, potential surface energy, and high solubility. Due to these unique properties, plant uptake is increased. Therefore, nanotechnology can be used in agriculture to supply agrochemicals quickly to the site of exploitation with only slight depletion. Due to their diverse properties, functionalities, and applications, NPs are one of the most multipurpose materials. Application of ZnO-NPs to crops can stimulate their growth, yield, and quality. Nutriment demand in food is increasing progressively, but the yield of tomato crops is gradually declining. Therefore, to achieve food demand and improve food quality, it is essential to become familiar with foliar application of Zn nutrient and ZnO-NPs for sustainable agriculture.