The Evolution and Future Trends of Unsaturated Polyester Biocomposites: A Bibliometric Analysis

Unsaturated polyester resin (UPR) is one of the first commercialized polymer matrices for composites reinforced with glass fibers, but has remained popular to this day. To reduce their environmental impact, natural fibers have been used as reinforcements. Researchers all over the world are still interested in these composites, and numerous papers have been published in the last four decades. Using bibliometric analysis, this work provides compiled, structured, and relevant information about the evolution and current state of these materials. This first study on UPR biocomposites based on bibliometric analysis examined 531 published papers identified in the Scopus database from 1982 to July 2022. An analysis of the most active states, leading institutions, and leading authors is followed by the identification of key areas such as the most common natural fibers used as reinforcements, fiber treatments, and composite design parameters such as processing techniques; recently, composite testing; and technological applications. The findings emphasize the importance of staying active in this global field and provide information on novel promising topics for future research.


Introduction
For decades, unsaturated polyester resins (UPRs) have been used as a basic thermosetting matrix for the fabrication of uncountable composite materials [1]. Thousands of tons of UPR matrices are consumed annually to develop an enormous number of composites, and the global market is expected to grow another 7.1% by 2030 [1]. The main advantages of UPR are its availability at a competitive price worldwide, the vast number of processes including the low-cost of manufacture as in the case of hand lay-up, and the flexible resin-curing process, which can occur at a broad range of temperatures, including room temperature (20 • C and 25 • C) [2].
One of the leading concerns regarding UPR composites is their environmental impact, especially when synthetic reinforced materials such as glass fibers are used. Several strategies have been proposed for reducing this impact. One of the most-documented methods to date is the use of natural fibers [3][4][5]. These composites are part of the recently called biocomposites [6,7]. Figure 1 summarizes the methodology used in this study. The first step involves the identification of keywords to find documents denoted as study design. This selection was useful for maximizing the number of useful documents. The records were collected from the Scopus database because it has a broader bibliometric scope and contains more current data than other databases [23,24]. This decision implies a limitation of this study; as Aria and Cuccurullo [22] point out, there is no database that covers all scientific subjects or journals. The usage of supplementary databases such as Scielo or Google Scholar could include works that are not recognized by Scopus, as in the case of a publication without CiteScore. At least five validations were required before creating the final search-query equation. These validations entailed assessing the impact of the obtained papers using keywords associated with different kinds of written word, such as fiber or fibre, and some writers used a variety of phrases to refer to natural fibers. These previous validations revealed the necessity of combining elements such as fib* and cell* with the Boolean operator OR. These components included information on vegetable fibers as well as other natural fibers such as animal fibers and mineral non-synthetic fibers [25]. The data-collecting process allows eligible records to be identified. To exclude documents related to other topics such as ceramic synthetic fibers, works related to the development or characterization of resin or traditional composites, elements associated with biocomposites or green composites such as bio*, nat*, and gre* linked by the Boolean operator OR were used. According to the previous evaluations, the final search-query equation utilized was ("unsat* poly*") AND (bio* OR nat* OR gre*) AND (fib* OR cell*) AND (comp* OR biocomp*). This equation included in the Scopus corresponds to title, abstract, and keywords (TITLE-ABS-KEY). All documents were collected between 1958 and July 2022, and correspond to the 820 records. As shown in Table 1, most of the 563 identified records were articles.

Materials and Methods
These texts were written in eight (8) different languages, the majority of which were written in English (95.5%), with Chinese coming in second with 2.1%. There were documents published in languages spoken by fewer than 70 million people worldwide, such as Malay. As shown in Figure 1, two inclusion criteria were used to improve this analysis: (1) type of document: chosen articles and reviews; and (2) language: written in English. Recognizing the importance of meticulously investigating all articles chosen, the two inclusion criteria were employed to ensure that all documents were readily available. After the inclusion criteria were applied, the total number of documents was reduced to 560, comprising 539 articles and 21 reviews. The following phase was an in-depth examination of each document's TITLE-ABS-KEY to validate the UPR biocomposite theme. Two criteria for exclusion were applied in this analysis: (1) duplicated documents and (2) documents with no data, such as the journal title. After this evaluation, the eligible records used in the bibliometric analysis corresponded to 531 documents: 520 articles and 11 reviews. The Scopus information of the final selected documents was stored in comma-separated values (csv) files. The data-processing and visualization processes were carried out utilizing VantagePoint 64-bit PRO version 14. For additional analyses, software VOSviewer version 1.6.18, Excel, and Origin Pro 11 were used.
The parameters considering a macro-and microlevel approach included parameters such as the most active state in UPR biocomposite research, prominent institutions and authors, and highly cited authors and papers. The data visualization was useful to show the collaborative networks of the co-authors, while the popular keywords used by the authors were useful to show the evolution of the different topics over time, as well as to identify the clusters and thematic areas, as suggested by Cobo et al. [26].
For the interpretation step, the eligible materials were thoroughly examined in order to find the most significant components of the theme categories discovered in the previous steps.  Equations (1) and (2) were used to determine the efficiency of the state contribution to this topic. These equations were proposed in the work of Tanjin Amin et al. (2019) [27]. Information on the population in million per state was obtained from the World Bank website [28]. Equation  [27], was used to evaluate the variation in the publication as a function of state.   [27], was used to evaluate the variation in the publication as a function of state.
Publications per million population = Total paper by a state Total population in million (1) Publications per capita income thousand USD = Total paper by a state Per capita income per thousand USD

Results and Discussion
In this study, 531 eligible papers were analyzed to identify the main trends linked to the evolution of the use of natural resources in UPR biocomposite developments. Analyzing these trends over time is useful for identifying gaps or opportunities in the current literature and proposing future innovations in this growing area. Prior to the detailed analysis, Figure 2 shows the evolution of publications since 1982, when the first study based on the effect of natural fibers as reinforcement for UPR matrices was published by Schaudy and Proksch (1982) [8], which used wood as the natural fiber. This work was published in the Industrial and Engineering Chemistry Product Research and Development. This journal was edited by ACS Publications until 1986. (3)

Results and Discussion
In this study, 531 eligible papers were analyzed to identify the main trends linked to the evolution of the use of natural resources in UPR biocomposite developments. Analyzing these trends over time is useful for identifying gaps or opportunities in the current literature and proposing future innovations in this growing area. Prior to the detailed analysis, Figure 2 shows the evolution of publications since 1982, when the first study based on the effect of natural fibers as reinforcement for UPR matrices was published by Schaudy and Proksch (1982) [8], which used wood as the natural fiber. This work was published in the Industrial and Engineering Chemistry Product Research and Development. This journal was edited by ACS Publications until 1986. One remarkable aspect observed in Figure 2 is the continuously increasing number of publications since 1986. Notably, the relevance rose from January 2005 and July 2022. During this period, 91.7% of the identified articles were published, of which 74% were published between 2011 and July 2022, and 67.2% between 2011 and 2021. The total number of publications by year corresponds to the equation y = 0.012x 3 + 0.13x 2 − 3.11x + 17.95. This equation demonstrates the increasing importance of publishing. The appropriate R2 value for this outcome is 0.9973. This indicates that UPR biocomposites continue to be a significant and growing issue. In the following subsections, a detailed bibliometric analysis of the development of UPR biocomposites is presented. This study takes a macrolevel approach, identifying and analyzing the impact of states with more active UPR biocomposite research. The microlevel study focused on identifying the institutions and main authors, as well as an examination of the author's keywords. The examination of the author's keywords provides information about trend subjects and their evolution over time.

States Active in UPR Composite Research
As shown in Figure 3, documents written by authors from all over the world were discovered in the database, totaling 62 countries, accounting for one-third of the ONU's membership in 2021. More than 84 papers were linked to colleges in India, Malaysia, and One remarkable aspect observed in Figure 2 is the continuously increasing number of publications since 1986. Notably, the relevance rose from January 2005 and July 2022. During this period, 91.7% of the identified articles were published, of which 74% were published between 2011 and July 2022, and 67.2% between 2011 and 2021. The total number of publications by year corresponds to the equation y = 0.012x 3 + 0.13x 2 − 3.11x + 17.95. This equation demonstrates the increasing importance of publishing. The appropriate R2 value for this outcome is 0.9973. This indicates that UPR biocomposites continue to be a significant and growing issue. In the following subsections, a detailed bibliometric analysis of the development of UPR biocomposites is presented. This study takes a macrolevel approach, identifying and analyzing the impact of states with more active UPR biocomposite research. The microlevel study focused on identifying the institutions and main authors, as well as an examination of the author's keywords. The examination of the author's keywords provides information about trend subjects and their evolution over time.

States Active in UPR Composite Research
As shown in Figure 3, documents written by authors from all over the world were discovered in the database, totaling 62 countries, accounting for one-third of the ONU's membership in 2021. More than 84 papers were linked to colleges in India, Malaysia, and China. (See maroon and prune colors in Figure 3). Table 2 lists the top 25 most productive states, while Figure 4 shows the top 10 publishing states since 1982. As shown in Figure 4, it is remarkable that India's leadership in this topic began in 1985 with the works of Varma et al. (1985) [29] and continued until July 2022. Some surprising results observed were the participation of authors from lower-income states, such as Ethiopia, which ranked 156th in 2021 for per capita income per thousand USD, and, as shown in Table 2, ranked 60th in the gross domestic product (GDP). Notably, almost 50% of the authors were associated with states from the Group of Twenty. There is a considerable amount of contributions from authors from less-developed economies such as Algeria, Bangladesh, Nigeria, Iraq, Egypt, and Ethiopia. This implies that this topic offers possibilities for research worldwide regardless of the economic strength of the state.  Table 2 lists the top 25 most productive states, while Figure 4 shows the top 10 publishing states since 1982. As shown in Figure  4, it is remarkable that India's leadership in this topic began in 1985 with the works of Varma et al. (1985) [29] and continued until July 2022. Some surprising results observed were the participation of authors from lower-income states, such as Ethiopia, which ranked 156th in 2021 for per capita income per thousand USD, and, as shown in Table 2, ranked 60th in the gross domestic product (GDP). Notably, almost 50% of the authors were associated with states from the Group of Twenty. There is a considerable amount of contributions from authors from less-developed economies such as Algeria, Bangladesh, Nigeria, Iraq, Egypt, and Ethiopia. This implies that this topic offers possibilities for research worldwide regardless of the economic strength of the state.   Table 2 shows the evaluation of the publication per million population of the top 25 contributing states, and the publications per capita income was calculated using China. (See maroon and prune colors in Figure 3.) Table 2 lists the top 25 most productive states, while Figure 4 shows the top 10 publishing states since 1982. As shown in Figure  4, it is remarkable that India's leadership in this topic began in 1985 with the works of Varma et al. (1985) [29] and continued until July 2022. Some surprising results observed were the participation of authors from lower-income states, such as Ethiopia, which ranked 156th in 2021 for per capita income per thousand USD, and, as shown in Table 2, ranked 60th in the gross domestic product (GDP). Notably, almost 50% of the authors were associated with states from the Group of Twenty. There is a considerable amount of contributions from authors from less-developed economies such as Algeria, Bangladesh, Nigeria, Iraq, Egypt, and Ethiopia. This implies that this topic offers possibilities for research worldwide regardless of the economic strength of the state.   Table 2 shows the evaluation of the publication per million population of the top 25 contributing states, and the publications per capita income was calculated using  Table 2 shows the evaluation of the publication per million population of the top 25 contributing states, and the publications per capita income was calculated using Equations (1) and (2), respectively. The results showed that Brazil, USA, and Indonesia were the three states with the highest scores with the most efficient relation of the publication per million population, whereas China displayed the lowest value, followed by Bangladesh, Nigeria, Japan, and Egypt. In the case of India, it was more efficient than states with comparatively higher incomes, such as China, Japan, and Italy, despite its larger population size.
Australia and Sweden had the lowest scores of the publication's per capita income (thousand USD) with 0.01, followed by Japan and Italy, with scores of 0.02. Surprisingly, India had a score of 7.38, which is significantly high considering that the per capita income per thousand USD of Australia is around 263 times that of India. An amazing result was observed for Ethiopia, with its presence in the top 25, despite having the lowest per capita income per thousand USD in this list. Figure 5 shows the evolution of publications for the top 10 states between 2011 and 2021 calculated using Equation (3). Indonesia was excluded in the figure because all published papers for this state were published during this period. The results showed that China was the most productive nation when it came to publications, following by Malaysia, India, Brazil, and the UK.  Figure 6 shows the trend of collaborations between authors from different states over time, and 59 collaboration nodes were identified. By analyzing the distance between the relevant nodes, nodes with large sizes, the distance between them, and the thickness of lines, a strong relationship was observed since 2010 between authors from Malaysia with Chinese, Indian, German, and American institutions. Since 2020, collaborations between authors from Malaysia and their colleagues from Indonesia, Bangladesh, Nigeria, and Australia have also increased. This can be attributed to the cultural affinities of Malaysian researchers with those from Indonesian or Bangladeshi and the collaborative international agreements between these states.  Figure 6 shows the trend of collaborations between authors from different states over time, and 59 collaboration nodes were identified. By analyzing the distance between the relevant nodes, nodes with large sizes, the distance between them, and the thickness of lines, a strong relationship was observed since 2010 between authors from Malaysia with Chinese, Indian, German, and American institutions. Since 2020, collaborations between authors from Malaysia and their colleagues from Indonesia, Bangladesh, Nigeria, and Australia have also increased. This can be attributed to the cultural affinities of Malaysian researchers with those from Indonesian or Bangladeshi and the collaborative international agreements between these states.

Leading Institutions
The total of 1216 departments and institutions have previously published papers on UPR composites. As shown in Figure 7, the top 10 publishing entities were located in the leading states mentioned above, in Figures 3 and 4. Remarkably, two Malaysian institutions were ranked in the top 10: Universiti Putra and Universiti Sains Malaysia, with 23   Figure 6 shows the trend of collaborations between authors from different states over time, and 59 collaboration nodes were identified. By analyzing the distance between the relevant nodes, nodes with large sizes, the distance between them, and the thickness of lines, a strong relationship was observed since 2010 between authors from Malaysia with Chinese, Indian, German, and American institutions. Since 2020, collaborations between authors from Malaysia and their colleagues from Indonesia, Bangladesh, Nigeria, and Australia have also increased. This can be attributed to the cultural affinities of Malaysian researchers with those from Indonesian or Bangladeshi and the collaborative international agreements between these states.

Leading Institutions
The total of 1216 departments and institutions have previously published papers on UPR composites. As shown in Figure 7, the top 10 publishing entities were located in the leading states mentioned above, in Figures 3 and 4. Remarkably, two Malaysian institutions were ranked in the top 10: Universiti Putra and Universiti Sains Malaysia, with 23

Leading Institutions
The total of 1216 departments and institutions have previously published papers on UPR composites. As shown in Figure 7, the top 10 publishing entities were located in the leading states mentioned above, in Figures 3 and 4. Remarkably, two Malaysian institutions were ranked in the top 10: Universiti Putra and Universiti Sains Malaysia, with 23 and 15 articles, respectively. These institutions were followed by two Chinese universities, Northeast Forestry University and Fujian Agriculture and Forestry University, with 6 works each of they, two American universities, Oregon State University and Utah State University with 9 and 4 articles, respectively. Further, the Indian Institute of Engineering Science and Technology and the Central Building Research Institute from India published 7 and 3 articles, respectively. The remaining institutions in the top 10 are Andalas University of Indonesia and Curtin University of Australia, with 3 publications each.
Notably, interdisciplinary work was conducted at institutions such as Universiti Putra, where research on UPR biocomposites was conducted in different divisions, such as the Department of Aerospace Engineering, the Department of Mechanical and Manufacturing Engineering, Department of Biological and Agricultural Engineering, Department of the Faculty of Engineering, and the Institute of Advanced Technology, indicating the versatility of natural fibers.

Leading Authors
In this study, 1393 authors were identified. As shown in Figure 8, 24 authors had written at least seven papers. From these results, it is possible to observe the co-operation and co-authorship between them, which are represented by the colored lines and small balls at the end of each line, respectively. The balls represent the number of publications between the connected authors. Generally, most of these authors worked with close partners of the same institution, as with the case of the most active author, Dr. S. M. Sapuan of Universiti Putra, who published 22 documents, 8 of them in collaboration with Dr. M. R. Ishak, 7 with Dr. A. Khalina (also identified as K. Abdan), and 5 with Dr. Z. Leman, all of whom were from the same institution. Dr. R. Qiu of Fujian is the second-highest contributing author, with 17 documents. He collaborated extensively with Agriculture and Forestry University co-authors such as Dr. W. Liu on 14 texts, Dr. T. Xie on 7 texts, and Dr. K. Li, who is affiliated with the Oregon State University, on 8 documents.
Notably, there was only one cluster constituted by Dr. B. Biswas of the Indian Institute of Technology, who published 14 papers. Notably, Dr. B. Biswas has a national network with Dr. A. Sinha of Kazi Nazrul University, who was a co-author on all documents. This information suggests that, even though collaboration between authors are popular, more can be done to promote international collaboration between authors. Notably, interdisciplinary work was conducted at institutions such as Universiti Putra, where research on UPR biocomposites was conducted in different divisions, such as the Department of Aerospace Engineering, the Department of Mechanical and Manufacturing Engineering, Department of Biological and Agricultural Engineering, Department of the Faculty of Engineering, and the Institute of Advanced Technology, indicating the versatility of natural fibers.

Leading Authors
In this study, 1393 authors were identified. As shown in Figure 8

Article Citations
There was a total of 19,206 citations identified by Scopus as of July 2022. The high number of citations suggests connections by a global network of researchers interested in UPR biocomposites. Seventy documents (13.2%) have no citations at the end of July 2022. This can be attributed to 84% of these articles being published between January 2019 and July 2022, with 43% of them being published until July 2022. Table 3 summarizes the top Notably, there was only one cluster constituted by Dr. B. Biswas of the Indian Institute of Technology, who published 14 papers. Notably, Dr. B. Biswas has a national network with Dr. A. Sinha of Kazi Nazrul University, who was a co-author on all documents. This information suggests that, even though collaboration between authors are popular, more can be done to promote international collaboration between authors.

Article Citations
There was a total of 19,206 citations identified by Scopus as of July 2022. The high number of citations suggests connections by a global network of researchers interested in UPR biocomposites. Seventy documents (13.2%) have no citations at the end of July 2022. This can be attributed to 84% of these articles being published between January 2019 and July 2022, with 43% of them being published until July 2022. Table 3 summarizes the top 10 the most-cited papers, which correspond to 84.6% of citations. Two of the top 10 were reviews, including the most-cited paper, with 2463 citations, which was 12.8% of the total citations. This work, titled "Biofibres, biodegradable polymers and biocomposites: An overview", was published in 2000 [5]. It contains detailed information about diverse types of natural fibers, including the chemical composition, mechanical properties, and a comparative analysis of the behavior of manmade fibers such as glass or carbon fibers. This work also provides detailed information about composites based on biodegradable matrices. The second review, titled "Recent developments on nanocellulose reinforced polymer nanocomposites: A review", published in 2007 [30] focuses on useful processing techniques that develop cellulose-reinforced composites from the micro to nano scale.
Five of the top 10 publications [31][32][33][34][35] are concerned with the alkaline treatment of natural fibers, while the remaining research papers are concerned with the effects of the fiber on the mechanical or physical behaviors of UPR biocomposites. This outcome implies that the authors' primary concerns were linked to the evaluation of UPR biocomposite behavior.

Source of Publications
The analyzed papers were published across 198 journals. The journal's subject areas included materials science, chemistry, engineering, chemistry engineering, energy, physics and astronomy, and environmental science. In the specific case of materials science, ceramics and composites were the focus. As shown in Figure 9 (Table 4). Notably, there were three journals that did not make it into the top 10, despite ha published more papers. In the case of J. Nat. Fibers, 86.7% of its 113 papers were c whereas for BioResources, all of its 244 papers were cited. Further, 80% of 101 papers lished by Polymers have been cited.  As shown in Table 4, the journal with the most-cited papers is Compos. Sci. Technol., with 2640 citations. This was followed by the Macromol. Mater. Eng. with 2480 citations. As observed in Table 3, the most-cited work was published by this journal. The next most-cited journals were J. Reinf 10. This trend may be attributed to the scope of these journals, which focuses on specific areas of composites. In addition, Compos. Sci. Technol., Compos. Part A Appl. Sci. Manuf., and Compos. B. Eng. were ranked in the top 10 journals of Citescore of the subject area of materials science in the topic of ceramics and composites and had the highest values (Table 4). Notably, there were three journals that did not make it into the top 10, despite having published more papers. In the case of J. Nat. Fibers, 86.7% of its 113 papers were cited, whereas for BioResources, all of its 244 papers were cited. Further, 80% of 101 papers published by Polymers have been cited.

Authors' Keywords
There were 1050 keywords identified across all analyzed articles. As observed in Figure 10a, the general cloud map of keywords over time was dominated by mechanical properties and composites. This confirms that some of the most-cited papers focused on composite evaluation. Meanwhile, Figure 10a,b showed that the variety of concepts has increased in the last 15 years, particularly in between 2017 and July 2022, in which 511 keywords were reported. The diversity of concepts can be attributed to grammatical differences, such as the use of different written forms such as fiber or fibre and alkaline or alkali treatment, the use of plural or singular words such as mechanical properties or mechanical property; or the use of the abbreviations against the complete name, particularly when mentioning a specific technique, such as scanning electron microscopy or SEM.
Even though the first recorded paper was published in 1982, the use of keywords was only registered for the first time in 1987. As observed in Figure 10b, the number of keywords used by the authors increased from 1987 to 1991. These keywords include terms such as: natural fiber sources, fiber modification, reinforcement configuration, and use of synthetic fibers to develop hybrid composites. An additional aspect identified in Figure 10b (1987-1991) is the early fabrication of hybrid composites reinforced using natural and synthetic fibers. keywords were reported. The diversity of concepts can be attributed to grammatical differences, such as the use of different written forms such as fiber or fibre and alkaline or alkali treatment, the use of plural or singular words such as mechanical properties or mechanical property; or the use of the abbreviations against the complete name, particularly when mentioning a specific technique, such as scanning electron microscopy or SEM.  Keywords associated with composite-processing techniques such as injection molding and BMC (bulk molding compound) started appearing in the second period (1992)(1993)(1994)(1995)(1996). Meanwhile, the use of specific concepts associated with composite behavior such as creep, dynamical mechanical analysis (DMA), or scanning electron microscopy (SEM) were observed in the third period (1997)(1998)(1999)(2000)(2001). In addition, a notable presence corresponds to the fiber configuration, as in the case of jute roving or the use of the aspect related to interfacial adhesion, the key factor in the development of this type of biocomposite. Further, there was a considerable increase in concepts associated with composite testing, multiple origins of natural fibers, interfacial adhesion, fiber treatment, and hybrid composites in the fourth period (2002)(2003)(2004)(2005)(2006). This trend was more evident in the three most recent periods (2007)(2008)(2009)(2010)(2011)(2012)(2013)(2014)(2015)(2016), and 2017-July 2022). Taking this evolution into consideration and based on the frequency, the authors' keywords can be categorized into five major research areas, as illustrated in Figure 11: (1) natural fiber types, (2) fiber modification or treatment, (3) UPR biocomposite design parameters, (4) UPR biocomposite behavior, and (5) UPR biocomposite applications. Following this categorization, Figure 12 shows the frequency with which these areas appear in the eligible documents. The main research topics are, as expected, related to the evaluation of the behavior of UPR biocomposites. The area of UPR biocomposite design parameters deals with the addition of fillers, additional components, the use of the UPR matrix modified with bio-based components, the development of hybrid composites, and the use of different fiber presentations.
as creep, dynamical mechanical analysis (DMA), or scanning electron microscopy (SEM) were observed in the third period (1997)(1998)(1999)(2000)(2001). In addition, a notable presence corresponds to the fiber configuration, as in the case of jute roving or the use of the aspect related to interfacial adhesion, the key factor in the development of this type of biocomposite. Further, there was a considerable increase in concepts associated with composite testing, multiple origins of natural fibers, interfacial adhesion, fiber treatment, and hybrid composites in the fourth period (2002)(2003)(2004)(2005)(2006). This trend was more evident in the three most recent periods (2007( , 2012( -July 2022. Taking this evolution into consideration and based on the frequency, the authors' keywords can be categorized into five major research areas, as illustrated in Figure 11: (1) natural fiber types, (2) fiber modification or treatment, (3) UPR biocomposite design parameters, (4) UPR biocomposite behavior, and (5) UPR biocomposite applications. Following this categorization, Figure 12 shows the frequency with which these areas appear in the eligible documents. The main research topics are, as expected, related to the evaluation of the behavior of UPR biocomposites. The area of UPR biocomposite design parameters deals with the addition of fillers, additional components, the use of the UPR matrix modified with bio-based components, the development of hybrid composites, and the use of different fiber presentations.

Research Areas
This section discusses the five main research areas that were previously iden based on the authors' keyword categorization. Figure 13 displays the three main types of natural fibers discussed in the pape cording to the textile industry classification [25] and fiber science classification [1 vegetable fibers, animal fibers, and mineral fibers. The case of mineral fibers unde sideration in this study pertains solely to natural fibers found naturally in specific [25,[36][37][38]. This research identified 129 varieties of natural fibers. In addition, the five frequently used natural fibers were vegetable fibers such as jute, kenaf, sisal, bambo hemp. These are vegetable fibers that are abundant in the international market, and been researched by the top 10 most productive authors (Figure 8). Further, less-com vegetable fibers that include vegetable fibers commercialized in the local or nationa

Research Areas
This section discusses the five main research areas that were previously identified based on the authors' keyword categorization. Figure 13 displays the three main types of natural fibers discussed in the papers, according to the textile industry classification [25] and fiber science classification [14,36]: vegetable fibers, animal fibers, and mineral fibers. The case of mineral fibers under consideration in this study pertains solely to natural fibers found naturally in specific rocks. [25,[36][37][38]. This research identified 129 varieties of natural fibers. In addition, the five most frequently used natural fibers were vegetable fibers such as jute, kenaf, sisal, bamboo, and hemp. These are vegetable fibers that are abundant in the international market, and have been researched by the top 10 most productive authors (Figure 8). Further, less-common vegetable fibers that include vegetable fibers commercialized in the local or national markets or isolated from wastes were considered as sources of natural reinforcement in 227 (42.7%) of the analyzed documents. However, these fibers are part of a broader variety, because this category corresponds to 76% of the identified natural fibers. UPR biocomposites are also an opportunity to find additional alternatives to fibers that are more common in the local market, but with less impact globally, such as the Tunisian alfa fiber isolated by the esparto grass [44][45][46], called the Stipa tenacissima plant, Brazilian native curaua [47], and Colombian fique fibers [48]. Figure 13 shows the use of fibers isolated from animal sources, which has been observed since 2007. Notably, the use of agro-industrial residues, such as chicken feathers [49] and bovine hairs [50], has increased significantly in between the last two periods (2012-July 2022). Once again, these studies focused on reducing the environmental impact of the abundant residues by reusing them in other sectors.

Types of Natural Fibers
With respect to mineral fibers, this study identified a heavy research focus on basalt fibers. According to Figure 13, the use of basalt fibers has increased during the last period. These fibers are formed after the rapid cooling of volcanic magma. The increasing interest in basalt fibers can be attributed to its advantages, such as UPR reinforcing owing to its mechanical, thermal, and physical behaviors [51], especially at approximately 1400 °C. In addition, basalt fibers are non-toxic and can be combined with glass fibers to produce hybrid composites [51].

Fiber Modifications or Fiber Treatments
One of the main challenges when producing UPR biocomposites is improving the natural fiber adhesion to the UPR matrix. These difficulties can be attributed to the polar character of the fibers owing to the significant presence of hydrophilic groups in cellulosic and non-cellulosic structures with reduced wettability with the less-polar UPR matrix [10,14,48]. A common strategy to reduce the polar character of natural fibers to improve resin wettability is via fiber modification. Several studies, including complete and extensive reviews, have focused on this topic [3,5,10,14]. Generally, fiber modification, also known as fiber treatment, involves the reduction of non-cellulosic components using alkaline treatments, and the introduction of new and less-polar functional groups by reducing the OH groups of the fiber or altering the fiber surface roughness. One of the mostdocumented fiber modifications methods is alkaline treatment, which was used in five of the top 10 most-cited articles. There were 137 identified documents (25.8% of the total) where it was implemented. Its popularity can be attributed to the low-cost infrastructure required, ease of modification (such as by changing the alkali solution concentration, temperature, or treatment time), and ease of accessibility of the chemical products required. In some occasions, alkaline treatments were combined with other fiber modifications such as silane treatment [52] to improve the mechanical behavior of the UPR biocomposites. The use of fibers obtained from less-common vegetable sources was first observed in the work of Owolabi et al. (1985) [39], who evaluated short coconut fibers as reinforcements. As observed in Figure 13, this trend continued to increase over time, particularly in the two most recent periods analyzed in this work (2012-2016 and 2107-July 2022). This can be attributed to the increasing demand for reusable agro-industrial residues that traditionally did not have any additional or high-level technological applications and UPR biocomposites that offer alternative uses. These alternatives have motivated authors, and this is one of the reasons for the popularity of this topic worldwide. This has also helped identify a large variety of agro-sources since the use of coconut fibers isolated from the residue of cultivars from India [40], Malaysian bagasse residues produced during the sugar cane juice extraction [35], Nigerian African star apple (Chrysophyllum albidum) residues [41], or Indi.an Cymbopogon flexuosus residues after oil extraction [42]. These strategies support the reduction of organic charge derived from the final disposition of agro-waste [43] or food waste and promote the implementation of green and circular economy strategies with a positive economic impact on the income of farmers.
UPR biocomposites are also an opportunity to find additional alternatives to fibers that are more common in the local market, but with less impact globally, such as the Tunisian alfa fiber isolated by the esparto grass [44][45][46], called the Stipa tenacissima plant, Brazilian native curaua [47], and Colombian fique fibers [48]. Figure 13 shows the use of fibers isolated from animal sources, which has been observed since 2007. Notably, the use of agro-industrial residues, such as chicken feathers [49] and bovine hairs [50], has increased significantly in between the last two periods (2012-July 2022). Once again, these studies focused on reducing the environmental impact of the abundant residues by reusing them in other sectors.
With respect to mineral fibers, this study identified a heavy research focus on basalt fibers. According to Figure 13, the use of basalt fibers has increased during the last period. These fibers are formed after the rapid cooling of volcanic magma. The increasing interest in basalt fibers can be attributed to its advantages, such as UPR reinforcing owing to its mechanical, thermal, and physical behaviors [51], especially at approximately 1400 • C. In addition, basalt fibers are non-toxic and can be combined with glass fibers to produce hybrid composites [51].

Fiber Modifications or Fiber Treatments
One of the main challenges when producing UPR biocomposites is improving the natural fiber adhesion to the UPR matrix. These difficulties can be attributed to the polar character of the fibers owing to the significant presence of hydrophilic groups in cellulosic and noncellulosic structures with reduced wettability with the less-polar UPR matrix [10,14,48]. A common strategy to reduce the polar character of natural fibers to improve resin wettability is via fiber modification. Several studies, including complete and extensive reviews, have focused on this topic [3,5,10,14]. Generally, fiber modification, also known as fiber treatment, involves the reduction of non-cellulosic components using alkaline treatments, and the introduction of new and less-polar functional groups by reducing the OH groups of the fiber or altering the fiber surface roughness. One of the most-documented fiber modifications methods is alkaline treatment, which was used in five of the top 10 most-cited articles. There were 137 identified documents (25.8% of the total) where it was implemented. Its popularity can be attributed to the low-cost infrastructure required, ease of modification (such as by changing the alkali solution concentration, temperature, or treatment time), and ease of accessibility of the chemical products required. In some occasions, alkaline treatments were combined with other fiber modifications such as silane treatment [52] to improve the mechanical behavior of the UPR biocomposites. However, despite the popularity of alkaline treatment, 102 treatments were identified in this study.
The rest of the identified treatments can be categorized into five strategies: (a) treatment using silane agents that contain groups with a chemical affinity to UPR matrices, such as aminopropyltriethoxysilane [53,54] or 3-methacryloxypropyltrimethoxysilane [48]; (b) the use of diverse acids, anhydrides, or esters to convert OH groups by esterification or transesterification reactions into less-polar ester groups-one of the most common methods include introducing double bonds onto the natural fiber surface, which improves the resin wettability using maleic anhydride [55,56]; (c) physical processes involving the use of plasma treatment [57,58], as in the case of Sarikanat et al. (2016) [59], who used Ar and air atmospheric-pressure plasma treatments to improve the mechanical properties of flax biocomposites; (d) thermal treatment, such as steam explosions combining temperature and pressure, which reduces non-cellulosic components affecting the chemical and morphological structure of the remaining fiber structures-this process usually involves the development of binderless boards [3], but it is also useful for UPR biocomposites, as shown in the work of Brugnago et al. (2011) [60], to reduce the content of the non-cellulosic components of the vegetable fibers; and (e) interactions between natural fibers and monomers or polymers. Monomers can be useful for inducing grafting modifications onto fiber surfaces [61]. Meanwhile, polymers can be used as fiber coatings or compatibilizers. For example, the starch coating of jute fibers improves the interface contact and enhances the mechanical behavior of the composites [62]. These alternative methods create innovative uses of fiber treatment using biodegradable products with a potential positive impact on the final degradation of the material.

UPR Biocomposite Design Parameters
There are two essential components to biocomposite design: natural reinforcement and the matrix. The main aspects of natural reinforcements are the source, reinforcement configuration, content, and use of the fiber treatment to improve the addition to the UPR matrix.
The essential parameters of the UPR matrix are the type and amount of curing agent used, the use or absence of cobalt accelerators such as the cobalt salts, the curing condition including cycles of temperature and pressure, and the use or absence of the post-curing step. This helped identify innovative alternatives that improved the mechanical behavior of the composites, utilizing strategies that include the application of a post-conforming process, such as the use of ionizing γ-irradiation on UPR composites, which enhanced the fiber/matrix interfaces [63,64] or enhanced composite behavior by the use of ultraviolet radiation for curing [65].
Notably, there has been an increasing number of studies related to the incorporation of bio-based components to modify the UPR matrix. This trend has been identified since 2005 across 17 papers (3.2%), whereas 10 of them have been published in the last analyzed period (2017-July 2022). These documents include different alternatives for reducing the environmental impacts of the matrix. In some cases, green monomers are used during UPR polymerization. A recent example is the addition of itaconic acid, ethylene glycol, and oxalic acid, which improves the mechanical and thermal properties, such as the glass transition temperature of the neat matrix [66]. On other occasions, this strategy used monomers obtained from recycled polyethylene terephthalate (PET) instead, which promotes the reuse of polymer waste [67]. A third method involves creating a matrix formed by mixing UPR and epoxidized vegetable oil, such as epoxidized soybean oil acrylate [68] or glycol-based block copolymers [63]. These alternatives could improve the biodegradability of the final material and the interface fiber/matrix modifying the mechanical behavior [63]. Another recently documented alternative is the incorporation of natural latex, such as epoxidized natural rubber [30] or Euphorbia coagulum which improved the mechanical properties and biodegradability [69].
The fiber configurations also provide opportunities to create hybrid composites that combine different types of natural fibers, such as jute-ramie [70], hemp-kenaf fiber [82], and the less-traditional banana-pandanus fibers [83]. In addition, it is common to combine natural and synthetic fibers, especially using traditional reinforcements, as glass fibers [40,[84][85][86][87][88]. This tendency has also been observed in the work of Varma et al. (1985) [29]. As mentioned above, the author's keyword hybrids are among the most used to date. Other synthetic fibers used to improve the mechanical and thermal properties of UPR hybrid biocomposites are carbon fibers [89] and Kevlar [90]. Notably, the evaluation of the hybrid fabrication parameters, such as the fiber disposition, type of fiber, number of layers, weaving conditions, hybrid fabrication, and the use of fiber binders, such as polymers that include PET or PE [36], are all relevant in the current research of UPR biocomposites.
Different molding processes have been proposed by researchers to fabricate UPR biocomposites over time, but the leading authors did not use a specific technique. These processes include traditional open molding such as hand lay-up and spray-up. Hand lay-up is one of the most-documented methods, and it was mentioned in at least 68 articles. Some of the most recent are published in 2022 [59,[98][99][100][101]. It has been used by many researchers in Indian, Malaysian, and Chinese laboratories. The second-most-documented technique is compression, which includes variations such as sheet molding compounds (SMC) [102][103][104][105] and bulk molding compounds [48]. Additional techniques include vacuum infusion [84,105], vacuum bagging [83,106,107], resin transfer molding [47,82], and pultrusion [108].
In the most recent analysis phase (2017-July 2022), a new study path arose related to precise dimensions or modifying the biocomposite surface. These technologies include laser beam and abrasive waterjet-cutting steps. However, concerns such as surface defects, delamination, or fiber degradation that affect UPR biocomposite properties must be investi-gated [51]. This new method shows promise for potential future applications because the components must be tight, using a secondary process that involves machining steps.

UPR Biocomposite Behavior
The effects of natural fibers on the mechanical behaviors of UPR biocomposites were explored in 87.2% of the identified papers. These evaluations have been predominant since 1982 and are mainly related to flexural and tensile tests. For tensile testing, researchers have attempted to establish the effects of untreated and treated natural fibers on the composite behavior [30,41,62,63,70,71,84,89,91,103,105]. Additionally, other types of tensile testing based on the evaluation of a single fiber or few fibers embedded in the matrix are useful for evaluating the matrix wettability, fiber/matrix adhesion, and efficiency of the fiber treatment [109]. The mechanical analyses also included other tests, such as the compression test [2,108], DMA [29,60,64,74], hardness test [41,66,91,110], impact test [2,62,111], and wear test [47,84].
The second-most-documented UPR biocomposite evaluation identified in this study is the thermal behavior. The most common technique is thermogravimetric analysis (TGA), which appeared in at least 21.3% of the articles. Further, fire retardancy behavior was mentioned in 3.0% of the documents, half of which were published in the last period of the analysis (2019 and July 2022). Their central measurements corresponded to the limiting oxygen index. Kumar et al. (1997) [112] was the first to publish about the fire retardancy of oil-palm-and glass-fiber-reinforced UPR hybrid composites.
With respect to physical evaluations, the most common assays corresponded to the determination of water uptake or moisture capture. These evaluations were identified in 26.9% of the documents. These assessments are important for identifying the potential applications of UPR biocomposites and determining the effects of the fiber modification on biocomposite behaviors owing to the reduced polar behavior of the natural fibers. There were broad alternatives that included the evaluation of sample weight after immersion in fresh water [62,70,113] or seawater [43,108], or variations in the thickness of samples caused by swelling [70].
Other evaluations of UPR biocomposites include the chemical resistance to acidic or basic environments [107,114], acoustical testing [74], antibacterial activity [47], biodegradability [69,102], ballistic behavior [90], dielectric testing [49], electrical conductivity, and thermal insulation [95]. Surprisingly, there was only one paper which discussed the biodegradation or degradation of UPR composites, in this case by photodegradation [113]. This lack of research suggests the need for further work on the end-consumer cycle of UPR biocomposites.

Applications of the UPR Biocomposites
Concerns regarding the potential applications of UPR biocomposites have been present since the first publication; the first mention identified in this study corresponds to the production of water-resistant chipboards and fiber hardboards [8]. This interest has continued to date. The bibliometric analysis identified 60 different mentions of viable applications in the analyzed documents, half of which appeared between 2017 and July 2022. The fabrication of automotive interior applications [2] was the most-documented application, appearing in 12 works, half of which were published between 2017 and July 2022. Interior construction and furniture are other important sectors in which UPR biocomposites have been considered for application [67,103,115]. For example, new products can be developed as lightweight and mechanically strong materials for earthquake-resistant wall panels [116] or marine transport applications [117], and as round rods used for insulating material applications. Information about potential applications were provided in 39 of the analyzed papers (7.3%), and 17.9% of these documents included authors affiliated with non-university institutions. This indicates the relevance of improving collaboration between research centers, industries, and universities to develop UPR composites suitable for application.

Opportunities for Future Research
As our work has shown, UPR biocomposites are a dynamic, global phenomenon that has offered opportunities to hundreds of researchers worldwide, particularly when using waste from food production, industrial byproducts, and post-consumer materials. There was a tendency noted by other writers when analyzing certain types of residues, such as the example of olive stones investigated by Valdez et al. [118]. The development of bio-based composites based on a circular economy and green chemistry can also be supported by the utilization of new raw materials, as recently commented by authors such as Daniel-Mkpume et al. [41] and Mujtaba et al. [119]. The potential for further research in this topic includes the following:

•
Increasing the use of bio-based matrices in the production of UPR biocomposites. Some of the research cited in this study [67,68,120] have investigated this line of inquiry, but it has the potential to grow in the next years, especially given the alternative of inserting natural components during UPR polymerization. Alternatives have been studied further in various polymer matrices [14], as well as in other thermo-set matrices, such as the bio-based epoxy resin [121].

•
Analyzing the environmental effect of the waste produced by fiber treatment, and evaluating less environmental detrimental processes which involve the reduction of the water and energy consumption, and the reduction or substitution of hazardous and difficult-to-dispose substances.

•
Continuing the development of UPR hybrid composites based on mixtures of natural fibers and natural synthetic fibers, as well as investigating the potential to include nanofillers or nanoreinforcements. • Using nanoreinforcements or nanofillers as a preferred reinforcement for the UPR matrix [68]. These nanoreinforcements may be adding during the manufacture of UPR biocomposite materials or during matrix polymerization, depending on their features.
Although this study indicates a growing interest in the field, further research is still required, especially given the transition from lab prototypes to semi-industrial-or industrial-scale applications. It is necessary to increase the participation of researchers from various industrial sectors to advance this topic.
Additional themes to investigate in relation to UPR biocomposites that were not identified in the examined documents but are of interest in material science research and have also been considered for other biocomposites [122] are: (1) evaluations of carbon neutrality, (2) evaluations of life cycle, (3) the analysis of circular economy, and (4) the analysis of manufacturing energy use. Future research investigations on these subjects should be considered, particularly because of the growing concerns over the role of material sciences in combating climate change.

Conclusions
This paper offered a quick and brief overview on the status of the development of UPR biocomposites using bibliometric analysis. We employed macro-and microlevel studies to discover the worldwide relevance of this topic, beginning with identifying the leading states where it is most relevant and significant, and progressing to identifying relevant research fields by analyzing the author's keywords and selected papers. It was discovered that one-third of the United Nations member countries had been active in UPR biocomposite research. The cubic regression of the publishing tendency shows that there is an active and growing interest in this area. The most active research correlates to studies undertaken in developing countries such as India, China, and Malaysia, which imply a potential future important impact on economies due to the association between research work per capita income and GDP. The five active research areas were identified through bibliometric analysis and an in-depth evaluation of the selected paper: (1) the type of natural fiber, (2) fiber modification or treatment, (3) UPR biocomposite design parameters, (4) UPR biocomposite design parameters, and (5) applications. It was possible to identify and suggest topics for future works for each of them, which included increasing the use of bio-based matrices in the production of UPR biocomposites, evaluating the environmental impact of waste produced due to fiber treatment, and implementing treatment that considers less use of water and energy resources. Furthermore, in addition to these tactics, this work illustrates the importance of continuing working to enhance the building of stronger industrial and academic teamwork, aided by international co-operation. Funding: This research was funded by Universidad Pontificia Bolivariana, grant number "692C-09/21-25" and "The Ministerio de Ciencia y Tecnología de Colombia" proyect name "Desarrollo de aplicaciones a partir del aprovechamiento de los subproductos de la cadena productiva del fique para la industria de alimentos, fitoterapeútica y cosmética.", grant number 1210-903-86606.