Non-Covalent Interactions in the Crystal Structure of Methyl 4-Hydroxy-3-Nitrobenzoate

Methyl 4-hydroxy-3-nitrobenzoate, (I), C8H7NO5, crystallizes with two unique molecules, A and B, in the asymmetric unit of the triclinic unit cell. The space group was assigned as P-1, with lattice parameters a = 0.72831(15), b = 1.0522(2), c = 1.1410(2) nm, α = 83.38(3), β = 80.83(3), γ = 82.02(3)°, Z = 4, V = 0.8510(3) nm, Mr = 197.15, Dc = 1.539 g/m , μ= 0.131 mm, F(000) = 408, R = 0.1002 and wR = 0.2519. In the crystal structure, 12 hydrogen bonding and two π-stacking interactions link the molecules into infinite stacked sheets parallel to (101).


Introduction
Weak noncovalent interactions play a significant role in biological or biomimetic systems as well as in artificial supramolecular structures.They can stabilize the three-dimensional structure of large molecules, such as proteins and nucleic acids, and are involved in many biological processes [1].Also, the noncovalent bond is the dominant contact between supramolecules in supramolecular chemistry [2].These forces commonly include both classical and non-classical hydrogen bonding, π-π and C-H…π

OPEN ACCESS
interactions together with hydrophobic forces, van der Waals interactions, and electrostatic effects [2].The study of these non-covalent interactions is crucial to understanding the structures of organic crystals, drug binding, and many biological processes.Experimentally, these interactions are often seen in complex environments, where it can be difficult to pick out only the interaction of interest.Theoretically, they feature shallow potential energy surfaces and require very accurate quantum-mechanical modeling for reliable predictive results.In the structure of methyl 4-hydroxy-3-nitrobenzoate, C 8 H 7 NO 5 (I), determined by single crystal X-ray analysis, we examine the variety of non-covalent interactions that lead to the overall stability of the crystal structure.

Results and Discussion
Methyl 4-hydroxy-3-nitrobenzoate (I) crystallizes with two unique molecules in the asymmetric unit of the triclinic unit cell (Figure 1).The two molecules are closely similar and overlay with an rms deviation of 0.0193 Å and a maximum deviation of 0.0398 Å [3].Both the N1 O1 O2 nitro and C7 O4 O5 C8 methyl ester substituents lie close to the planes of the benzene rings in both molecules, with dihedral angles between the planes of 6.1 (6) ° and 10.5 (3) ° in molecule A and 6.2 (7) ° and 10.4 (2) ° in molecule B. Intramolecular O3A-H3A•••O2A and O3B-H3B•••O2B hydrogen bonds, Table 1, generate planar S(6) rings [4].Rms deviations from these ring planes are 0.035Å for molecule A and 0.023Å for molecule B suggesting that these contacts contribute to the overall planarity of both molecules.A search of the Cambridge Database [5] reveals two isomeric forms of (I), namely methyl 2-hydroxy-3-nitrobenzoate (II) [6] and methyl 2-hydroxy-5-nitrobenzoate (III) [7] together with the closely related methyl 2-hydroxy-3,5-dinitrobenzoate (IV) [8].In all three similar structures, intramolecular O-H…O hydrogen bonds involve the OH substituent and either a nitro or carbonyl oxygen and ensure that the molecules adopt reasonably planar conformations.Interestingly, for (II) and (IV), where a choice of O acceptor atom is possible due to the relative placements of the nitro and methyl ester substituents, the carbonyl O atom of the methyl ester is the preferred acceptor.In addition, the structures of a number of derivatives in which the phenol H atom has been replaced to form alkyl [9] and aryl [10,11] ether derivatives have also been reported.
In the crystal structure two sets of centrosymmetric dimers form through O3A-H3A•••O1B hydrogen bonds together with C1B-H1B•••O2A interactions and O3B-H3B•••O1A and C1A-H1A•••O2B contacts (Figure 2).The formation of each dimer generates R 2 2 (11) rings [4].Additional weak C-H•••O contacts link these dimers into sheets in the bc plane.π-Stacking interactions are also found between the aromatic rings of adjacent molecules, linking them in a head to tail fashion (Figure 3).Centroid to centroid distances are 3.713 (3) for the A and 3.632 (3) for the B molecules.These interactions are augmented by additional weak inversion related C8A-H8AA•••O3A and C8B-H8BA•••O3B contacts forming AA and BB dimers and generating R 2 2 (18) rings.The two sets of dimers combine to form sheets parallel to the (101) plane (Figure 4).Similar sheet formation is also common to the crystal structures of the isomeric forms (II) and (III) [6,7]; significant C-H…O hydrogen bonds are found in both structures forming layers that are further connected by weak π…π contacts.

Experimental Section
Synthesis of methyl 4-hydroxy-3-nitrobenzoate (I).Cerium (IV) ammonium nitrate (CAN) (10.96 g, 20 mmol) was added to a mixture of methyl 4-hydroxybenzoate (1.5 g, 10 mmol) and NaHCO 3 (3.5 g) in anhydrous MeCN (60 mL) at room temperature while stirring.The reaction mixture was then stirred at room temperature for a further 30 min.The resulting mixture was filtered, washed with water, and extracted with ethyl acetate (3 × 25 mL).The combined extracts were dried over anhydrous Na 2 SO 4 , and the solvent removed to furnish the title compound (70%).m.p. 74-76 °C. 1 H NMR (DMSO-d 6 , 400 MHz, ppm) δ 8.39 (d, J = 1.7 Hz, 1 H), 8.06 (dd, J = 8.7 Hz, 1.7 Hz, 1 H), 7.23 (dd, J = 8.7 Hz, 1.7 Hz, 1 H), 3.85 (s, 3 H). 13 X-ray Data Collection and Structure Solution.A single crystal of (I) with dimensions 0.20 mm × 0.18 mm × 0.04 mm was selected for data collection performed on a Rigaku Saturn CCD area detector (λ = 0.71073 Å) [12] using the ω-2θ scan mode.A total of 5670 reflections were collected in the range 1.8 ≤ θ ≤ 26.1°.Of these 2959 were independent (R int = 0.129), and 1408 were considered to be observed with I > 2σ(I) and used in the succeeding refinement.The structure was solved by direct methods and refined on F 2 by full matrix least-squares using the SHELXTL program [13].The H3A and H3B atoms of the hydroxy groups were located in a difference Fourier map and their coordinates refined with U iso = 1.5U eq (O).All other H-atoms were refined using a riding model with d(C-H) = 0.93Å, U iso =1.2U eq (C) for aromatic and 0.96Å, U iso = 1.5U eq (C) for CH 3 H atoms. Goodness-of-fit on F 2 is 0.951.R = 0.1003 and wR2 = 0.2519, with (w = 1/[σ 2 (F o 2 ) + (0.0965P) 2 ], where P = (F o 2 + 2F c 2 )/3).(∆ρ) max = 0.43, (∆ρ) min = -0.45e/Å 3 .The crystal was very weakly diffracting with less than half of the measured reflections with I > 2σ(I) and a high R(int).In addition, anisotropic refinement led to elongations of displacement ellipsoids for some atoms and restraints were used in order to minimise these effects.The final residuals are therefore somewhat higher than normal as a result, but this does not markedly affect the integrity of the overall structure.

Conclusions
The molecular and crystal structure of methyl 4-hydroxy-3-nitrobenzoate (I) is reported.The structure is stabilised by an extensive set of twelve hydrogen bonding and two π-stacking interactions.

Figure 1 .
Figure 1.The asymmetric unit of (I) with displacement ellipsoids for the non-hydrogen atoms drawn at the 50% probability level, and intramolecular hydrogen bonds are drawn as dashed lines in molecules A and B.

Figure 2 .
Figure 2. Centrosymmetric dimers forming sheets in the bc plane with hydrogen bonds drawn as dashed lines.

Figure 3 .Figure 4 .
Figure 3. Centrosymmetric dimers formed by π•••π contacts (dotted lines) and weak C-H•••O interactions dashed lines.The red spheres represent centroids of the benzene rings in the A molecules and the blue sphere those in the B molecules.

Table 1 .
Hydrogen-bond geometries for compound I.