When the Metal Makes the Difference: Template Syntheses of Tridentate and Tetradentate Salen-Type Schiff Base Ligands and Related Complexes

The reaction of organic molecules mediated by a metal center (template synthesis) can result in a final connectivity that may differ from the one obtained in the absence of the metal. The condensation of carbonyl fragments with primary amines form C=N iminic bonds, the so-called Schiff bases, which can act as ligands for the templating metal center by means of the lone pair on the nitrogen atom. This review focuses on the template methods for the reaction between a carbonyl compound (mainly salicylaldehyde) and a primary aliphatic diamine able to prevent the double condensation on both amine groups and obtain tridentate N2O ligands. These adducts, still having one free amino group, can further react, yielding tetradentate salen-type Schiff base ligands. A screening over the transition metals able to show such a template effect will be presented, with particular attention to copper(II), together with their peculiar reactivity and the available crystal structure of the metal complexes and related coordination geometries.


Introduction
The term template synthesis can be referred to ligand-based reactions that occur between two or more organic molecules coordinated to a metal center. This emphasizes the preorganization of the organic derivatives, now called ligands, given by the coordination sphere of the metal ion, so that, in its absence, the same organic reaction might produce different products. The template effect induced by the metal center plays an important role in coordination chemistry and it can be divided in two main ones: first, a metal ion is able to hold the reactive functional groups in a position so that the reaction between them may occur (kinetic template effect), and second, once the reaction has occurred, a thermodynamic more stable product, stabilized by chelation to the metal ion, is present as a ligand (thermodynamic template effect) [1]. The modification of the electronic properties (acidity, flexibility, conjugation, etc.) of the ligands upon coordination is also the reason that explains the variability of the observed reactivity. Crown ethers [2] are among the most famous examples of organic molecules obtained through a template synthesis; it involves the alkylation of alcohols in the presence of alkali metals or other cations with variable ionic radii to preferentially obtain cyclic poly-ethers with modulated sizes [3,4]. The alkali metal ion employed during the syntheses of crown ethers can then be easily expelled from the cavity, liberating the crown ether for its subsequent use. It has also to be noted that some reactions can proceed similarly in the absence of the templating ion, even if usually with lower yields and selectivity.
A powerful strategy to gain control on the condensation between aliphatic diamines (such as en and tn) and different carbonyl compounds can rely on the template effect. The method exploits the presence of a metal center able to properly direct the reacting species through coordination. Indeed, the condensation reaction can also occur when the two organic reagents are already coordinated to the metal ion, leading directly to a metal complex with the imine. The templating center can be in some cases removed from the Schiff base, as in the case of crown ethers, by applying competing complexation reactions, such as with nickel(II) and dimethylglioxime (Hdmg) [60], or replaced by metal scrambling [61]. By the way, this is feasible for mononuclear complexes or isolated monometallic coordination environments, while it may become complicated or even not achievable when polynuclear species with bridging coordinating atoms are formed upon condensation of the surrounding Schiff base ligands.
Due to the vastness of studies on Schiff bases, which have been known and applied by chemists since the early stages of coordination chemistry, during the last century and far from being exhaustive, this review focuses on the essential template effect given by transition metal ions, with particular attention to copper(II), in obtaining tridentate N 2 O half units and tetradentate salen-type Schiff base ligands derived from G-salH and primary aliphatic diamines, not accessible without the presence of the metal center, and their complexes.

Tridentate N 2 O Schiff Bases and Their Omplexes
Copper (II) has revealed to be a very versatile and efficient templating metal ion for obtaining tridentate N 2 O half units, and several approaches have been described for the last four decades. The first method here described employs an auxiliary monodentate ligand L' in the reaction process to isolate the mononuclear complexes of general formula [Cu( G L)(L')](X) (X -= anion) [39,53,[62][63][64][65][66][67][68][69][70]. The reaction occurs at room temperature in methanol, and the sequence of addition of the reagents in the reaction mixture is fundamental, usually entailing copper(II) salt, G-salH, and L' first in a 1:1:3 ratio, and then the aliphatic diamine. This ensures first the coordination of G-salas a bidentate ligand and two molecules of L' to copper(II) yielding the intermediate [Cu(G-sal)(L') 2 ] + , Equation (1a): then, it can undergo condensation to one among the two primary amino functions once the diamine is added, yielding the N 2 O tridentate Schiff base ligand G Land concomitant replacement of one molecule of L' by the remaining free amino group, Equation (1b) [62].
The auxiliary ligands L' usually employed are pyridine (py) [39,53,62,63,65,66,[68][69][70], imidazole (imH) [62,66], and piperidine (pip) [67,69], while the copper(II) salts are nitrate [62,63] or perchlorate [39,53,62,63,65,66,[68][69][70]. The py/ClO 4 combination is among the most applied since it probably ensures the highest purity and yield of the isolated products. This method revealed to be very versatile in terms of the variability of the substituent on the G-salH and its position on the aromatic ring. Unsubstituted H-salH has been mainly employed [39,62,65,66], but the presence of electron withdrawing   [39,63,68]) or releasing (3-OMe [53,67,69], 5-OMe [39]) groups is also well tolerated by this synthetic path. The aliphatic diamine can also vary from en [39,53,62,63] to tn [39], 2-methyl-1,2diaminopropane (pn) [53,65], 2,2,-dimethyl-1,3-diaminopropane [67,69], and the chiral chxn and diphenylethylendiamine (dpen) [67][68][69][70]. The efficacy of this method, which takes advantage of the thermodynamic template effect [67], relies on two features: (i) copper prefers a square planar geometry, and (ii) the ancillary ligand L' can saturate the coordination sites in the intermediate [Cu(G-sal)(L') 2 ] + in solution and in the final product [Cu( G L)(L')](X) in the solid state to ensure such a coordination environment ( Figure 2). Indeed, the crystal structure of several derivatives has been obtained during the years [39,[65][66][67][68]70], and all of them show the copper(II) ion surrounded by the N 2 O ligand G Land a molecule of auxiliary ligand L' in the equatorial plane. The Cu-O bond distances usually settle around 1.90 Å, while the Cu-N ones are usually longer and depend on the nitrogen atom involved. The iminic nitrogen atom is usually more strongly coordinated to copper(II) with shorter distances (around 1.95 Å) than the ones involving the amino group and the ancillary ligand L' (around 2.00 Å), and this can be ascribed by its central position in the chelating tridentate N 2 O ligand and its contemporary involvement in two metallacycles. It is worthy to compare the two derivatives [Cu( H L)(L')](ClO 4 ) with L' = imH [66] and py [65] and both with H L − derived from en. The Cu-N distance with imH is markedly shorter (1.968(2) Å) than the one with py (2.037(5) and 2.016(4) Å for the two independent molecules in the asymmetric unit), while all the other coordination bonds are practically coincident, suggesting a stronger interaction of imH compared to py. The departure from the ideal square planar geometry is usually given by slight tetrahedral distortions, being higher in the case of tn derivatives compared to en ones. Differently from mononuclear complexes derived from en and tn, which are usually employed as synthetic precursors (see the following discussion), the mononuclear derivatives [Cu( G L)(py)](ClO 4 ) from meso-dpen (G = H, 3-OMe) were screened for their in vitro cytotoxic activity against cancer cell lines [70], while [Cu( G L)(py)](ClO 4 ) from (1R,2R)-(+)dpen or (1S,2S)-(+)-chxn (G = 5-NO 2 ), thanks to their non-centrosymmetric crystal packing in the solid state, were synthesized and analyzed for their solid-state nonlinear optical (NLO) properties [68].
The second method that employs copper(II) as template center to obtain mono-condensation of G-salH with aliphatic diamines, especially en or tn, does not use any ancillary ligand but relies on the high-dilution of the reactants. The synthetic procedure consists of the addition of a concentrated solution of Cu(ClO 4 ) 2 ·6H 2 O and diamine (≈ 0.4 mol L −1 ) in a MeOH:H 2 O 1:1 solvent mixture to a boiling diluted methanolic solution of the sodium salt of the G-salH (≈ 0.01 mol L −1 ), Equation (2). Then, the reaction mixture is refluxed for 2-3 h, and the product, as a dinuclear species of general formula [Cu 2 (µ-G L) 2 ](ClO 4 ) 2 , can be recovered as solid upon concentration of the mother liquor [39,64,[72][73][74].
This method is less common than the one previously described, probably because of the higher amount of employed solvent and the refluxing conditions, but it has also proved good versatility with respect to the substituents on the aromatic ring (G = H [39,72,73], 5-Me [72], 5-OMe [39], 5-R with R = C 5 H 11 O, C 6 H 13 O, C 7 H 15 O, and C 9 H 19 [74]), and the aliphatic diamine, en [39,[72][73][74] or tn [39,64,73]. From a structural point of view, two [Cu( G L)] + moieties are linked together by bridging phenoxido oxygen atoms, which act as fourth ligand to complete the square planar coordination of copper(II) [39,75] (Figure 3a).  Further interactions with the perchlorate anions or additional solvent molecules occur in the fifth apical position of one or both copper(II) ions, as observed for the mononuclear derivatives. With this regard, the comparison between [Cu 2 (µ-H L) 2 ](ClO 4 ) 2 [64] and [Cu 2 (µ-H L) 2 (µ-MeOH)](ClO 4 ) 2 [39,75], both derived from H-salH and tn, can reveal some details on the electronic needs of copper(II). The absence of bridging solvent led to multiple short interactions with the perchlorate anions ranging from 2.511(2) to 2.854(2) Å on both sides of the coordination square plane, resulting in a zig-zag arrangement of dinuclear species in the solid state [64]. On the other side, the presence of the bridging methanol gives rise to short interactions with both copper(II) ions (Cu1···O1(MeOH) = 2.650(3) and Cu2···O1(MeOH) = 2.480(3) Å [39]) pushing the perchlorate anions farther, which only interact with the copper(II) that shows the longest distance with methanol with a weaker interaction than before (Cu1···O1ClO 3 ) = 2.948(11) Å) on the other side of the square plane.
The high-dilution template method under the same reaction conditions of boiling methanol affords trinuclear species of general formula [Cu 3 (µ 3 -OH)( G L) 3 ](ClO 4 ) 2 when operating in a basic medium, Equation (3) [39,66,[76][77][78][79][80]. Of sure interest is the combined effect of the electronic features of the substituent on the G-salH on the reaction product: the electron donor methoxy group (G = 5-OMe) leads invariably to the dinuclear species even in excess of NaOH as source of the bridging OH group, while the electron withdrawing nitro group (G = 5-NO 2 ) yields only to the trinuclear compounds also in defect of base [39]. Furthermore, the electronic effect exerted by the substituent G in position 5 (Me, H, Br, NO 2 ) is able to efficiently modulate the Cu···Cu magnetic super-exchange in these spin-frustrated systems [76].
A triply-bridging hydroxido ligand occupies the fourth coordination site of each of the three copper(II) ions with a bond distance slightly varying around 2.00 Å and giving rise to a global propeller-like structure formed by the three [Cu( G L)] + blades. Additional elongated Cu···O apical positions (2.30-2.50 Å) are occupied by the oxygen atom of the adjacent blade, thus increasing the coordination toward square pyramidal and with a partial cubane Cu 3 O 4 core ( Figure 3b) [76]. Further additional apical interactions of the copper(II) ions with perchlorate anions and/or solvent molecules are also active in practically all the known derivatives [39,76,78,80].
The addition of a base (excess of Et 3 N or stoichiometric NaOH) to a suspension of the mononuclear [Cu( G L)(L')](ClO 4 ) or dinuclear [Cu 2 (µ-G L) 2 ](ClO 4 ) 2 derivatives in methanol leads to their conversion into the trinuclear species [Cu 3 (µ 3 -OH)( G L) 3 ](ClO 4 ) 2 as a result of the increasing concentration of OH − ions into the basic medium [39,64,66,78]. This conversion method is particularly convenient for obtaining the trinuclear derivatives since it avoids the use of harsh reaction conditions and high amounts of methanol. It is of sure interest to highlight the effect of the position of the substituent G and its steric requirements, since the treatment of [Cu( G L)(py)](ClO 4 ) with a 3:1 molar excess of Et 3 N gave invariably the dinuclear species of general formula [Cu 2 (µ-OH)( G L) 2 ](ClO 4 ) when G = 3-OMe, while it gave the trinuclear complexes when G = H, independently of the diamine used (en, chxn, or 2-methyl-1,2-diaminopropane) [78].
Indeed, mono-, di-, and tri-nuclear compounds have been suggested to be in equilibrium in solution with their mononuclear solvated species [Cu( G L)(solv)] + (solv = H 2 O, MeOH), which can readily interconvert depending on the concentration, pH, and temperature [39,62,64,66,78].  Alternatively, in the presence of a stronger coordinating anion compared to ClO 4 -, such as Cl -, N 3 -, NCO -, NCS -, etc., the dinuclear species [Cu 2 (µ-X) 2 ( G L) 2 ] are obtained and stabilized in the solid state. There are examples where they can be obtained directly by the reaction of CuX 2 :diamine:G-salH in a 1:1:1 ratio, which is followed by the addition of an excess of sodium salt of the anion X − if different from the one of the copper(II) salt (G = H [82], 3-OMe [83], naphtalaldehyde [84], 5-Cl [85]), Equation (4), but they can be more conveniently prepared by the conversion of suitable precursors, such as [Cu( G L)(py)](ClO 4 ) [69,86] and [Cu 2 (µ-G L) 2 ](ClO 4 ) 2 [72,86], by the addition of an excess of NaX. In these complexes, the anion X − occupies the fourth coordination site of copper(II) within the square plane with a short bond length, and it acts as bridging ligand toward a second [Cu( G L)] + unit with a longer distance and occupying a fifth apical position. Then, each of the two metal centers can be considered pentacoordinate in a square pyramidal geometry with a long apical distance [72,[82][83][84]87]. This coordination situation gives rise to a ladder-like structure where the two square-planar coordination environments are not coplanar, implying peculiar Cu···Cu magnetic super-exchange interactions [82,84,88].

Unsymmetrically Substituted Salen-Type Copper(II) Complexes
Reaction of the mono-, di-and tri-nuclear copper(II) complexes with N 2 O tridentate Schiff base ligands described above, and in particular the mononuclear ones, with a differently substituted G'-salH or another carbonyl derivative allows obtaining the unsymmetrically substituted N 2 O 2 and N 3 O salen-type copper(II) complexes [62,63,[65][66][67]69,70,72,74,89]. Reaction conditions usually involve the suspension or dissolution of the half-unit complex in methanol and addition of the second G'-salH or carbonyl derivative together with a deprotonating base (Et 3 N or NaOH). Upon heating under reflux, the condensation reaction occurs, and the final product precipitates from the reaction medium due to the low solubility of these neutral derivatives in a polar solvent such as methanol, Equation (5).
[Cu( G L)(L')](X) + G'-salH + NaOH → [Cu(G-G'-salen)] + L' + NaX + H 2 O It is noteworthy that the reaction of mononuclear [Cu( OMe L)(py)](ClO 4 ) ( OMe Lfrom 3-OMe-salH and chxn) with pyrrole-2-carboxaldehyde (p-2-c) without the addition of base and at room temperature leads first to the coordination of the carbonyl group as a fifth apical ligand and isolation as single crystals suitable for X-ray diffraction of the species [Cu( OMe L)(py)(p-2-c)](ClO 4 ), which highlights the role of the kinetic template effect [67]. The pyridyl ligand strongly deviates from the square coordination plane of copper(II) to accommodate the upcoming aldehyde group with a short Cu-O bond of 2.402(4) Å [67]. The presence of NaOH as a base to deprotonate the pyrrolic ring and refluxing conditions for 20 min allowed the condensation between the coordinated primary amino group of the tridentate ligand and the carbonyl moiety, leading to the final tetradentate N 3 O Schiff base ligand with the concomitant expulsion of py (thermodynamic template effect) [67].
It is not easy to generalize, since the unsymmetrical substitution can be obtained with several derivatives, which drive the best conditions for this second template reaction. There are applications of this synthetic method in several fields, from obtaining [Cu(5-G-5 -G'salen)] liquid crystal compounds with modulated melting points (G and G' are long-chain alkyl or alkoxy groups) [74] to push-pull [Cu(5-A-5 -D-salen/saltn)] derivatives for the study of their NLO properties (A = NO 2 , H; D = H, Me, OMe, NMe 2 ) [63]. The use of the chiral diamines dpen and chxn leads to complexes that have been studied for example for their NLO properties [63,68] as well as for their in vitro anticancer activity [70]. The OMe as substituent in position 3 of the sal moieties is instead beneficial for obtaining heterooligo-nuclear clusters with 4f elements such as gadolinium [69], but also terbium and dysprosium [69,89], which are interesting for their magnetic properties and the presence of strong ferromagnetic interaction between the paramagnetic centers [90]. The formation of such derivatives occurs thanks to the second coordination pocket suitable for lanthanides given by the oxygen atoms of the OMe groups in combination with the phenoxido atoms already involved in the coordination of copper(II) acting as bridges.
Molecules of [Cu(5-A-5 -D-salen/saltn)] tend to couple in head-to-tail dimers in the solid state due to dipole-dipole alignment from the charge asymmetry caused by the different substitution, together with a fifth Cu···O(phenoxido) apical interaction [63] ( Figure 5a). Bulky substituents on the ligand, such as in dpen [70] or in 2-methyl-1,2diaminopropane [89] derivatives, reduce this tendency as they allow only weaker interactions (Figure 5b). The presence of a (CH 2 ) 3 bridge linking the iminic nitrogen atoms also confers high flexibility to the tetradentate ligands, which can lead to a variable tetrahedral distortion of the copper(II) coordination environment [63,89]. For example, this deviation from square planar geometry can be quantified by the angle θ between the CuON planes of the two sal moieties (θ = 0 and 90 • for pure square planar and pure tetrahedral geometries, respectively); this angle reaches the value of 28.8 • in [Cu(3-OMe-3 -OMe-5 -COOMe-sal-2,2-Me 2 -tn)] [89].

Nickel (II) and Unsymmetrically Substituted Saltn Ligands
In addition to the previous methods with copper(II) [39,63], the mono-condensation of G-salH and tn to obtain the half unit H G L can be easily achieved by the template effect of nickel(II), as shown by Elder a few years ago [37]. Thanks to the preferred octahedral coordination environment of nickel(II) and the (CH 2 ) 3 bridge between the two amine groups in tn, the mononuclear complexes [Ni( G L) 2 ] can be isolated from the reaction of G-salH, tn, and Ni(AcO) 2 in a 2:2.5:1 ratio (the diamine is sometimes used in a higher excess) [37,38,[91][92][93][94] in refluxing ethanol, Equation (6a). In these derivatives, the nickel(II) ion is hexacoordinate by two tridentate N 2 O Schiff base ligands G Lwith an octahedral N 4 O 2 coordination environment ( Figure  6a) [95]. There are examples of this synthesis for similar complexes also with different carbonyl derivatives [96,97] or diamines, such as N-substituted tn [98,99]. Differently from what was reported for copper (II), this synthetic methodology cannot be used with en due to the shorter bridge of only two carbon atoms between the two amine groups, which probably does not confer enough flexibility for hosting two tridentate ligands on the same nickel(II) ion. In this case, the symmetric [Ni(salen)] is inevitably the most stable product formed [94]. Several G groups are tolerated by this synthetic method, ranging from H [37,38,87,91,94] [97] can also be applied, which is a synonym of the versatility of such a template synthesis. At this stage, it is possible to proceed with the sequestration of nickel(II) from [Ni( G L) 2 ] as [Ni(dmg) 2 ] obtaining H G L as free ligand [60,75,87,[100][101][102][103][104][105], Equation (6b), and this differentiates the method from the ones reported above, where no attempts to remove copper(II) from the 'half unit' derivatives are reported. Once the N 2 O Schiff base is liberated, the primary amino group can easily react with a second carbonyl derivative yielding unsymmetrically substituted tetradentate salen-type ligands, which can undergo complexation with metals such as copper(II) [60,[100][101][102]105] and nickel(II) [60,102], Equation (6c).  [37,38,94], Equation (7). This reactivity revealed to be selective with no traces of symmetric complexes detected, and it takes advantage of the kinetic template effect, which stabilizes the dinuclear species [Ni 2 (µ-L) 2 (G'-sal) 2 ] as intermediates of the ligand exchange mechanism [94,106], followed by the thermodynamic product [94].
Unsymmetrically substituted [Ni(5-A-5 -D-saltn)] complexes, where G is an electron withdrawing group (A) and G' is an electron donor group (D), have been studied for their linear and nonlinear optical features from both the experimental and the theoretical points of view as efficient push-pull systems [94]. Few nickel(II) derivatives have been also structurally characterized and, as observed for copper(II), molecules tend to couple in head-to-tail dimers in the solid state due to dipole-dipole alignment [38,94] (Figure 6b). In these cases, the tetrahedral distortion from square planar geometry reaches its highest value of 24.5 • in [Ni(3,5-Cl 2 -thiosaltn)], where nickel(II) has an N 2 OS coordination set, and the high difference between the Ni-O (1.851(5) Å) and Ni-S (2.166(2) Å) bond distances is the responsible for such a distortion [38].
The examples reported for iron(III) are peculiar and show both the template effect of this metal ion and also its preferential stabilization in a low spin state [107,108] with two tridentate G L − ligands embracing the metal ion in an octahedral environment. The direct reaction in refluxing methanol of an iron(II) or iron(III) salt with a mixture of G-salH and aliphatic diamine in a 2:1 ratio, thus suitable for salen ligands, gave invariantly Fe( G L) 2 ](X) derivatives with mono-condensed tridentate ligands. This has been observed for different aldehydes (H-salH [109], 2-hydroxy-1-naphthalaldehyde [110], and 2-mercaptobenzaldehyde [107]), diamines with two or three methylene units (en [107,109] and 2,2-dimethyl-1,3-diaminopropane [110]), and variable iron sources (FeCl 3 [107], hydrated Fe(ClO 4 ) 3 [110], FeCl 2 with concomitant oxidation to iron(III) [107]). It is noteworthy that the reaction of [Fe(salen)(Cl)] with en in ethanol leads to its conversion to [Fe( H L) 2 ](Cl) [108] where the initial kinetic template effect brings en within the coordination sphere of iron(III), and then the thermodynamic template effect allows the formation of the most stable product. The anion X − in the final product can be the same as in the iron source (Cl − [107,108]) or different for the addition of a different anion (SCN − [109,110]) (Figure 7a). It is also important to highlight a peculiar structural difference: meridional coordination of G L − is preferred when short en is employed [107][108][109] while facial coordination is present in the compound with the long 2,2-dimethyl-1,3-diaminopropane [110].

Vanadium(V), Molibdenum(IV), and Tungsten(IV)
Vanadium(V) expresses a template effect comparable to copper(II), and this allows the isolation of dinuclear dioxovanadium(V) complexes [VO 2 ( G L)] 2 with coordinated N 2 O half units derived from G-salH (G = H, 5-Br, 3,5-Cl 2 , 3-OMe) and en or pn [134]. In this case, the addition of the reagents is different from that reported for copper(II), following the order VO(OEt) 3 and en (or pn) first, yielding an intractable off-white intermediate, and then G-salH, leading to the precipitation of the final complexes. The two vanadium(V) ions possess an octahedral coordination environment and are bridged by two oxo ligands, one from each metal, as confirmed by the X-ray crystal structure of the complex from H-salH and pn (Figure 8a). There are no reports, until now, about the possibility to react [VO 2 ( G L)] 2 with a different carbonyl moiety to obtain unsymmetrically substituted tetradentate ligands coordinated to vanadium(V). Molybdenum(IV) and tungsten(IV) were also reported to support the mono-condensation and isolation of coordinated tridentate ligands [135]. The molecular structure of the molybdenum derivative with en reveals that H L − acts as a bidentate ligand through the phenoxido and imino atoms, while the primary amino group does not coordinate the metal ion (Figure 8b), and this missing coordination can be the reason for the formation of H 2 salen.

An Example of Template Method with Zinc(II) and Salophen Derivatives
We have already reported that 1,2-phen can undergo mono-condensation of H-salH also in the absence of the template effect of metal centers [47], and that unsymmetrically substituted derivatives can be formed [136]. Nevertheless, after the examination of aliphatic diamines en, tn, pn, etc., it is worthy to report a different but interesting example of template synthesis involving this aromatic diamine and zinc(II). The reaction of [1,1 -biphenyl]-3,3 ,4,4 -tetraamine (bis-1,2-phen) with G-salH (G = H, 3-tBu) allows the isolation of derivatives A with mono-condensation on the two sides ( Figure 9a) [137,138]. The subsequent reaction with a second G-salH can lead to two equal unsymmetrically substituted H 2 salophen pockets, which can coordinate different metal ions [138]. Condensation on only one side of A can be alternatively obtained under diluted conditions and by using stoichiometric amounts of both 3,5-diNO 2 -salH and Zn(OAc) 2 ·2H 2 O, and mono-metalated complexes in one complete salophen pocket are readily isolated in good yield. On the other side, mixtures of components, such as unreacted diimine and mono-or bi-metalated structures, are obtained if either higher concentrations or other reaction stoichiometries are applied. This mono-metalated derivative can now react with a third 3-X-5-Y-salH (X = OMe, tBu, Me, H, allyl, Br, Cl, NO 2 ; Y = H, allyl, Br, Cl) to obtain two unequal salophen compartments and fully unsymmetrically substituted complexes B (Figure 9b) [139].

An Example of Template Method with Zinc(II) and Salophen Derivatives
We have already reported that 1,2-phen can undergo mono-condensation of H-salH also in the absence of the template effect of metal centers [47], and that unsymmetrically substituted derivatives can be formed [136]. Nevertheless, after the examination of aliphatic diamines en, tn, pn, etc., it is worthy to report a different but interesting example of template synthesis involving this aromatic diamine and zinc(II). The reaction of [1,1′-biphenyl]-3,3′,4,4′-tetraamine (bis-1,2-phen) with G-salH (G = H, 3-tBu) allows the isolation of derivatives A with mono-condensation on the two sides ( Figure 9a) [137,138]. The subsequent reaction with a second G-salH can lead to two equal unsymmetrically substituted H2salophen pockets, which can coordinate different metal ions [138]. Condensation on only one side of A can be alternatively obtained under diluted conditions and by using stoichiometric amounts of both 3,5-diNO2-salH and Zn(OAc)2·2H2O, and mono-metalated complexes in one complete salophen pocket are readily isolated in good yield. On the other side, mixtures of components, such as unreacted diimine and mono-or bi-metalated structures, are obtained if either higher concentrations or other reaction stoichiometries are applied. This mono-metalated derivative can now react with a third 3-X-5-Y-salH (X = OMe, tBu, Me, H, allyl, Br, Cl, NO2; Y = H, allyl, Br, Cl) to obtain two unequal salophen compartments and fully unsymmetrically substituted complexes B (Figure 9b) [139].  Two additional points regarding the previous example are the possibility to undergo the complete transmetalation of zinc(II) with nickel(II) and selective demetalation of the X/Y pocket when X = tBu and Y = H [139] by employing imidazole in acetonitrile [140]. This last selectivity can be driven by the steric hindrance of the two tBu groups in position 3, which may confer lower complex stability [141] and prevent stabilizing dimeric interactions through Zn···O short contacts [142][143][144], which instead block the diNO 2 pocket from being demetalated.

Conclusions
The template syntheses here described and necessarily applied to obtain tridentate N 2 O and tetradentate salen-type Schiff base ligands derived from G-salH and primary diamines (especially aliphatic en, tn, pn, chxn and dpen) have clearly highlighted several critical but fundamental points, which can be summarized as follow: (i) Employment of aromatic vs. aliphatic primary diamines: the first ones, due to their lower nucleofilicity, permit mono-condensation with G-salH yielding tridentate N 2 O ligands also in the absence of metal templating centers, and further transformation into unsymmetrically substituted tetradentate derivatives, which are ready to coordinate different metal ions. Aliphatic diamines such as en and tn need instead the template support to undergo mono-condensation to tridentate G Lhalf units, followed by unsymmetrically substituted salen-type complexes.
(ii) Nature of the templating metal: due to different charge, ionic radius, and also electronic configuration, each metal ion prefers a certain coordination environment, ranging from square planar for copper(II) to octahedral for nickel(II), iron(III), cobalt(III), and chromium(III). This certainly leads to strongly influencing the reaction conditions, the use of auxiliary ligands to block the double symmetric condensation, and also selection between en and tn when obtaining N 2 O tridentate derivatives, as observed for nickel(II) vs. iron(III), cobalt(III), and chromium(III).
(iv) Possibility to remove the templating metal center to release the Schiff base: this was illustrated in the case of nickel(II) derivatives [Ni( G L) 2 ] ( G Lfrom tn) by the competing coordination ability of Hdmg toward Ni 2+ by formation of the very stable and insoluble strawberry-pink [Ni(dmg) 2 ] [145]. Salophen derivatives show the ability to be demetalated, but they can also undergo efficient transmetallation.
Regardless of the method, all the template syntheses have seen a continuous and fruitful evolution over time since their first reports, and applications of the complexes obtained thanks to the template effect of several metal ions are as diverse as catalysis, linear and nonlinear optics, magnetism, and also biological purposes. Thus, future employments of template strategies are for sure envisaged in the field of Schiff base compounds, together with the development of new methods.

Conflicts of Interest:
The authors declare no conflict of interest. The funders had no role in the design of the study; in the collection, analyses, or interpretation of data; in the writing of the manuscript, or in the decision to publish the results.