Three Multi-Components Reaction: Synthesis and X-Ray Single-Crystal of Hydroacridinone-Based Hydrazino- S -Triazine Derivative as a New Class of Urease Inhibitor

: The one-pot fashion of three multi-component reaction provides the desired hydroacridinone-based hydrazino- s -triazine scaffold 4 . Compound 4 was crystallized in an orthorhombic crystal system and Pbca space group with a = 11.6271(2) Å, b = 18.2018(4) Å, c = 32.4721(6) Å, and α = β = γ = 90° with one formula unit per asymmetric unit and eight molecules per unit cell. Additionally, structural features, Hirshfeld surfaces, and DFT studies were also investigated. Its packing in the crystal is controlled by H…H (63.4%), O…H (12.7%), Cl…H (7.2%), N…H (4.7%), and C…H (10.2%) contacts, where the O…H and Cl…H contacts were found the strongest. In vitro urease inhibition evaluation showed that the hydroacridinone-based hydrazino-s -triazine is more active (IC 50 = 17.9 ± 0.47 µM) than the standard acetohydroxamic acid (IC 50 = 20.3 ± 0.43 µM).


Introduction
Urease is a metalloenzyme-containing nickel that frequently exists in various plants, bacteria, fungi, and algae and leads to the growing of different bacteria pathogen (e.g., Helicobacter pylori) in acidic condition inside the stomach. Several health complications including hepatic coma, urinary tract infections, gastric lymphoma, gastric ulcers, gastric carcinoma, pyelonephritis, and kidney stones proved to be related to these bacterial infections [1,2]. In spite of numerous compounds being well-known to have potential urease inhibition, few of them are in the market for urease treatment. Thus, the discovery of effective and safe urease inhibitors is a very important issue in pharmaceutical research due to the contribution of ureases in different pathological conditions.
According to our knowledge, the search of potent acridine-based s-triazine compounds as urease inhibitors is not reported so far. Accordingly, we synthesized a hydroacridinone-based hydrazino-striazine derivative via a one-pot multi-component reaction. The in vitro anti-urease inhibition of the hydroacridinone-based hydrazino-s-triazine was evaluated. In addition, its structural features, Hirshfeld surfaces, and DFT were demonstrated.

General Methods
All melting points were determined using Mel-Temp electrothermal apparatus (Electrothermal, Staffordshire, ST15, UK) and were uncorrected. Thin-layer chromatography (TLC) was conducted on silica gel (Kiesel gel G, Merck) and spots were detected under UV light at 254 nm. IR spectra were recorded in a KBr matrix with a Perkin Elmer, Spectrum 100 FT-IR spectrophotometer (FT-IR, Perkin Elmer, Waltham, MA, USA). Furthermore, 1 H and 13 C NMR spectra were recorded in CDCl3 as solvent using JEOL 400 MHz (JEOL, Ltd, Tokyo, Japan), and the chemical shifts (δ) values were given in ppm. X-ray crystallographic analysis was collected by using Bruker SMART APEX II D8 Venture diffractometer at Karachi University.

Single-Crystal X-ray Diffraction Analysis
Single-crystal X-ray diffraction analysis of compound 4 was carried out by mounting an appropriate crystal with dimensions 0.15 × 0.09 × 0.07 mm 3 on a Bruker D8 Venture equipped with CCD Photon II detector and graphite monochromator having Cu Kα radiation (λ = 1.54178 Å) at T = 173 K for data collection. For the integration and reduction of data, SAINT (Bruker 1998) program was used [31]. The structure solution was done by direct method and Fourier transformation techniques, and further refined by full-matrix least-squares techniques on F 2 using SHELXL-2018 program. PLATON (Spek 2008) [32] and SHELXL (Sheldrick 2015) [33] programs were employed for the final refinement of the solved structure (

Hirshfeld Surface Analysis
The topology analyses based on CIF data were performed using Crystal Explorer 17.5 program [34] in order to determine the percentages of the different intermolecular interactions in the crystal structure of the studied compound.

Computational Methods
All DFT calculations were performed using Gaussian 09 software package [35,36]. The optimized geometry in gas phase was calculated using B3LYP/6-31G(d,p) method. The starting input was the X-ray structure coordinates. No imaginary frequencies were obtained indicating a real energy minimum.

Urease Inhibition
The urease inhibition assay was performed spectrophotometrically. The final volume of the reaction mixture was 200 µL, comprising 25 µL of urease enzyme solution (1 U/well is defined as the release of 1 µM of substrate per unit time under the specified conditions). This mixture was incubated with 5 µL of test compound (500 µM) for 15 min at 30 °C (urease enzyme was prepared in phosphate buffer pH 6.8, concentration 4 mM). Thereafter, 55 µL of urea (substrate) at a concentration of 100 mM was added, and the plate was again incubated for 15 min at 30 °C. After incubation, 45 µL of phenol reagents (1% w/v phenol and 0.005% w/v sodium nitroprusside), and 70 µL of alkali reagents (0.5% w/v sodium hydroxide and 0.1% sodium hypochlorite) were added to each well. The plate was re-incubated for 50 min at 30 °C. The continuous production of ammonia by urease was monitored following the Weatherburn method, and absorbance was recorded at 630 nm on an ELISA plate reader (Spectra Max M2, Molecular Devices, CA, USA). Acetohydroxamic acid was used as a reference compound (Standard Drug, available under the brand name Lithostate) [37,38].
The 1 H-NMR spectra are consistent with the assigned structure of 4. A multiplet signal was shown at δ 7.37-7.15 ppm and the singlet at δ 4.7 ppm could be assigned for the aromatic protons and the benzylic proton, respectively. In the aliphatic chemical shift region, a multiplet at δ 3.85-3.71 ppm for the morpholino and piperidinyl moieties protons was observed. The hydroacridinone proton was detected at δ 2.44-2.15 ppm. Additionally, the signal δ 1.52 ppm could be assigned to 7H of the piperidinyl ring (3CH2), which overlays with the NH proton. Finally, the singlet signal assigned to the four methyl groups with 12 protons was detected at δ 1.23 ppm. 13

Crystal Packing
In crystal lattice of compound 4, molecules are found to be interlinked via H1…O1 interactions with donor-acceptor distance of 2.727(3) Å (Table 2), arranged to form a three-dimensional network. The C-H…π interactions further strengthen the crystal structure with H12B…Cg3 (N3-N5/C30-C32) and a distance of 2.71 Å ( Table 2). These inter-molecular interactions existing in crystal packing of 4 are shown Figure 2.

Hirshfeld Analysis of Molecular Packing
In Hirshfeld surface analysis, the dnorm is a normalized contact distance as defined by Equation (1). The di is normalized by the van der Waals radius of the atoms involved; de is similarly normalized, and the sum of these two quantities is the dnorm property. Where atoms make intermolecular contacts closer than the sum of their van der Waals radii, these contacts will be highlighted in red on the dnorm surface. Longer contacts are blue and contacts around the sum of van der Waals radii are white [41].
Hirshfeld surfaces for compound 4 are shown in Figure 3. The decomposed fingerprint plots indicated that the most common contacts are H…H (63.4%), O…H (12.7%), Cl…H (7.2%), N…H (4.7%), and C…H (10.2%) as shown in Figure 4. Among them, the O…H and Cl…H contacts appeared as intense and faded red spots in the dnorm maps, respectively, while the rest of other contacts appeared as blue regions. From this point of view, the O…H and Cl…H contacts are considered the strongest among the others. These interactions appeared as relatively sharp spikes in the fingerprint (FP) plots ( Figure 5). The intermolecular distances are 1.831 Å and 2.791 Å for the O1…H1 and Cl1…H28A, respectively.

Geometric Parameters
The crystal structure was left to relax using DFT B3LYP/6-31G(d,p) method and the resulting optimized structure is presented in Figure 6. Bond distances and angles are given in Table S2 (Supplementary Materials). Figure 7 showed the good correlations between the calculated and experimental bond distances (R 2 = 0.973), and angles (R 2 = 0.952). The presence of many polar atoms related to the highly electronegative atoms such as oxygen, nitrogen, and chlorine leads to a polar molecule with a high dipole moment of 9.268 Debye. The natural atomic charges and the direction of the dipole moment vector are given in Table S3 (Supplementary Materials) and Figure 6, respectively. The dipole moment vector is oriented toward the most polar region in the molecule, which is the carbonyl oxygen atoms.

Biological Activity
In a recent publication [51], we reported the synthesis of several hydrazone derivatives based on s-triazine and their corresponding anti-proliferative activities. Of these derivatives, only three inhibited the growth of lung carcinoma A549 and hepatocyte carcinoma HepG2 cells. Our results showed the combination of morpholino and piperidinyl moieties conferred greater selectivity for A549 cells and had a reasonable inhibitory effect on HepG2 cells [52].

Conclusions
The present report describes the design and synthesis of hydroacridinone-based 11ydrazine-striazine derivative as a promising anti-urease agent. The synthesized hydroacridinone based hydrazino-s-triazine derivative (4) showed more potency than acetohyroxamic acid as reference. Thus, the hydroacridinone-based s-triazine could be considered as a compound of potential lead for further optimization and drug discovery in future work. Hirshfeld analysis indicated the importance of the H…H (63.4%), O…H (12.7%), Cl…H (7.2%), N…H (4.7%), and C…H (10.2%) in the molecular packing of 4. DFT calculations indicated that 4 is polar compound with a total dipole moment of 9.268 Debye. Its reactivity indices were computed using the frontier molecular orbital energies. The computed bond distances and angles were found in good correlations with the experimental results.

Supplementary Materials:
The following are available online at www.mdpi.com/xxx/s1: Figure S1, The atom numbering of the calculated molecular structure of the studied compound; Table S1, The calculated bond distances and angles of the studied organic compound compared to the experimental X-ray structure data; Table  S2, The natural atomic charge analysis of the studied compound.