Insight into the Photocatalytic Activity of Cobalt-Based Metal–Organic Frameworks and Their Composites

: Nowadays, materials with great potential for environmental protection are being sought. Metal–organic frameworks, in particular those with cobalt species as active sites, have drawn con-siderable interest due to their excellent properties. This review focuses on describing cobalt-based MOFs in the context of light-triggered processes, including dye degradation, water oxidation and splitting, carbon dioxide reduction, in addition to the oxidation of organic compounds. With the use of Co-based MOFs (e.g., ZIF-67, Co-MOF-74) as photocatalysts in these reactions, even over 90% degradation efﬁciencies of various dyes (e.g., methylene blue) can be achieved. Co-based MOFs also show high TOF/TON values in water splitting processes and CO 2 -to-CO conversion. Additionally, the majority of alcohols may be converted to aldehydes with efﬁciencies exceeding 90% and high selectivity. Since Co-based MOFs are effective photocatalysts, they can be applied in the elimination of toxic contaminants that endanger the environment.


Introduction
When thinking of an inexhaustible source of energy, the sun comes first. Sunlight offers a huge package of energy, and the only limitation is the ability to harvest it properly. Therefore, the scientists of the world are in a race to develop a method of harvesting light that can revolutionize every aspect of our daily lives. Photocatalysts can utilize light energy and transfer it to form or break bonds in molecules. Technologies based on photocatalysis, such as the production of clean fuels, the reduction of greenhouse gases or the degradation of pollutants, hold great promise for energy and environmental protection [1][2][3][4][5]. Up to now, the most investigated light-driven processes are degradation of dyes [6], water splitting, and oxygeref. 5n/hydrogen evolution reactions (OER/HER) [7][8][9][10], in addition to carbon dioxide reduction [11,12]. Certainly, these reactions can be carried out with noble metals or photocatalytically active metal oxides [13]. However, they are limited either by high price or poor selectivity in obtaining the desired product. Metal-organic frameworks (MOFs) are a new class of porous crystalline materials that have been shown to be very useful in photosensitive processes. MOFs are built of inorganic nodes (metal ions or metal clusters), connected to organic linkers [14]. They are famed for their well-developed surface area, rich topology, tuneable porous structure, and unique morphology of particles [15]. Due to their features, MOFs are applied in various areas, such as adsorption, gas separation, sensing, energy storage, drug delivery, and catalysis [16][17][18].
Conventional photocatalysts face issues with accessibility to the catalytic centres. MOFs, due to their high porosity, can provide ample access to the active sites that ensure product separation [19][20][21]. Briefly, a heterogeneous catalytic reaction consists of five main steps: (i) diffusion of the reactant to the catalyst surface, (ii) reactants adsorption on the surface, (iii) chemical reaction, (iv) products desorption, and (v) products diffusion. If there interface and high dispersion of Co active sites. Moreover, MOFs can be recovered after the catalytic reaction due to their solid structure.
Noble metals such as Pt and Rh, metal oxides e.g., TiO2 are great promoters in lighttriggered catalysis, but they are expensive and can catalyse the reaction backwards, hence the search for new materials and the use of other metals must be considered [49]. Up to now, various MOFs have been successfully utilized as catalysts in processes such as water splitting [50][51][52][53], CO2-to-CO conversion [54,55], photocatalytic degradation of dyes [56], and the oxidation of organic compounds [57]. Moreover, there are many methods to modify MOFs for photocatalysis i.e., ligand functionalization, mixed-metal/linker strategy, organic compounds sensitization, metal ion/ligand immobilization and doping [58]. Cobaltbased MOFs are well known in traditional heterogeneous catalysis and are increasingly recognized specifically in photocatalysis. However, the versatility of Co-MOFs in photocatalytic processes has not yet been sufficiently emphasized. For this reason, the following review focuses primarily on the application of cobalt-based MOFs and their composites in light-driven reactions, such as dye degradation, water oxidation for O2 evolution, water splitting for H2 generation, CO2 reduction to CO, and oxidation of organic compounds ( Figure 1). A compilation of approaches to the applicability of Co-MOFs, a comparison of their efficiencies, and suggestions on the mechanisms driving photocatalytic reactions have been provided. Additionally, interesting examples of Co-MOFs with high catalytic activity and/or selectivity for the desired product are presented. It should be mentioned that the performance of MOFs is often reported in different ways e.g., as turnover number (TON), turnover frequency (TOF), the amount of generated product, or even the quantum efficiency of the catalyst. This could pose an issue for the comparative analysis [59,60]. The advantages of Co-MOFs in relation to other traditional catalysts have also been highlighted taking into account their regenerability, stability, cost, and reusability. Figure 1. The applications of cobalt-based MOFs, MOFs doped with Co 2+ species, and MOF-derived materials, in various photocatalytic processes i.e., degradation of dyes, water oxidation for O2 evolution, water splitting for H2 generation, CO2 reduction to CO, and oxidation of organic compounds. The applications of cobalt-based MOFs, MOFs doped with Co 2+ species, and MOF-derived materials, in various photocatalytic processes i.e., degradation of dyes, water oxidation for O 2 evolution, water splitting for H 2 generation, CO 2 reduction to CO, and oxidation of organic compounds.

Photocatalytic Degradation of Dyes
Textile, paper, and clothing industries are the main cause of the existence of organic dyes in water, which contributes to significant environmental pollution. Industrial effluents that contain toxic and non-biodegradable colorants are highly dangerous toward living organisms, thus their removal from water reservoirs is necessary. Various processes e.g., membrane filtration [61], ion exchange [62], adsorption [63], ozonation [64], coagulation-flocculation [65], or photocatalytic degradation [66] are applied in order to eliminate dyes present in water. Over the past few years, photodegradation has become popular since it carries numerous advantages. The reaction may be conducted at room temperature and lasts only a few hours. Moreover, contaminants can be mineralized to harmless molecules (e.g., water, carbon dioxide) through the in situ generation of radicals without forming harmful secondary products. Light intensity, pH, or adsorption properties can affect the photodegradation of dyes. With the increase in the irradiation intensity, reactive oxygen species are generated at a higher rate and the photocatalytic performance is improved. Electrostatic interactions between the reactants are determined by the pH value, however, each catalyst may work more efficiently at a different pH. Although the moderate dye adsorption enhances the degradation yield, after exceeding a certain limit it can be unfavourable. Not only do fewer photons reach surface active sites, but also the molecules of a dye can act as sensitizers that absorb electrons, scattering them in unwanted directions.
In the first step of the photocatalytic process, pollutants are transported from the environment to the surface of the photocatalyst where oxidation-reduction reactions take place. Photogenerated electrons in the CB and holes in the VB force these reactions to occur. Afterward, the products are desorbed and returned to the liquid phase. In order to generate electron-hole pairs, the energy of the photons must be equal to or exceed the band gap of the photocatalyst [67]. In the photodegradation of dyes, materials such as oxides (TiO 2 , ZnO), metal salts, or chalcogenides (e.g., CdS, Sb 2 S 3 , MnS), including their composites were described, although recently cobalt-based MOFs have been willingly utilized [68]. The large surface area, a wide selection of metallic centres and organic linkers, as well as the possibility to control morphological properties make MOFs excellent potential photocatalysts [68,69].
ZIF-67, synthesized via hydrothermal reaction from cobalt salts, (e.g., Co(NO 3 ) 2 × 6H 2 O) and 2-methylimidazole as organic linker, has a large specific surface area and is highly porous, hence it exhibits numerous applications in photocatalysis. The mechanism of the photocatalytic degradation of dyes using ZIF-67 is simple ( Figure 2). In order to regain the stable state, the electron is taken from the water molecule causing its oxygenation into •OH active form. Additionally, the electron that is present in the LUMO and the oxygen from ZIF-67 surface form •O 2 − that is subsequently converted into •OH. Dye molecules may be cleaved by these radicals to successfully conduct the photodegradation [70,71]. ZIF-67@CoWO4@CoS showed approximately 100% efficiency in methylene blue photodegradation after only 10 min of irradiation. Both individual components' degradation effectiveness and the activity of ZIF-67@CoWO4 and ZIF-67@CoS are not as high as ZIF-67@CoWO4@CoS, which may result from the synergistic effects of pure MOF, CoWO4, and CoS as well as the narrow band gap energy in the ZIF-67@CoWO4@CoS. The novel catalyst turned out to be very stable and even after eight reuses its activity loss is insignificant. ZIF-67 and ZIF-8 were combined to create a single structure Co/Zn-ZIF that can be applied in the photodegradation of indigo carmine under solar-simulated irradiation [73]. One-pot synthesis was conducted at room temperature in order to incorporate cobalt into the ZIF-8 structure. A very important property of the new, bimetallic Co/Zn-ZIF is its excellent stability in aqueous solutions, which is a crucial factor for any material used in photodegradation processes. Less than three hours of irradiation in the presence of Co/Zn-ZIF is required to remove almost 100% of the dye. Due to the fact that hydroxyl ions facilitate the generation of hydroxyl radicals, which are behind the indigo carmine decompo- This MOF has already been used in the photodegradation of methyl orange [70], methyl blue [71], and rhodamine B [71]. Over 88% of methyl orange was decomposed after one hour, which is related to reactive charge carriers' formation by the photoactive particles of ZIF-67. Furthermore, ZIF-67 exhibited high photostability and only a small decrease in its photocatalytic activity is noticeable after three degradation cycles [70]. ZIF-67 used in methyl blue and rhodamine B removal was subjected to argon annealing treatment to improve the photocatalytic activity. In one hour, 85.7% and 54.8% of dyes were degraded, respectively. Compared with the ZIF-67, ZIF-67(Ar) displayed better tolerance toward pH changes, therefore higher degradation rates in a wide pH range were observed [71]. New nanocomposite ZIF-67@CoWO 4 @CoS was synthesized from ZIF-67 in addition to CoWO 4 and CoS nanoparticles, and applied as a photocatalyst for methylene blue degradation [72]. Given that CoS is biocompatible and cheap, and, moreover, in the presence of Co(II) ions peroxide substrates, may be decomposed into •OH, it can be used to activate ZIF@CoWO 4 . This allows the generation of free radicals under visible light irradiation. ZIF-67@CoWO 4 @CoS showed approximately 100% efficiency in methylene blue photodegradation after only 10 min of irradiation. Both individual components' degradation effectiveness and the activity of ZIF-67@CoWO 4 and ZIF-67@CoS are not as high as ZIF-67@CoWO 4 @CoS, which may result from the synergistic effects of pure MOF, CoWO 4 , and CoS as well as the narrow band gap energy in the ZIF-67@CoWO 4 @CoS. The novel catalyst turned out to be very stable and even after eight reuses its activity loss is insignificant.
ZIF-67 and ZIF-8 were combined to create a single structure Co/Zn-ZIF that can be applied in the photodegradation of indigo carmine under solar-simulated irradiation [73]. One-pot synthesis was conducted at room temperature in order to incorporate cobalt into the ZIF-8 structure. A very important property of the new, bimetallic Co/Zn-ZIF is its excellent stability in aqueous solutions, which is a crucial factor for any material used in photodegradation processes. Less than three hours of irradiation in the presence of Co/Zn-ZIF is required to remove almost 100% of the dye. Due to the fact that hydroxyl ions facilitate the generation of hydroxyl radicals, which are behind the indigo carmine decomposition, the catalytic activity of a MOF is higher in an alkaline environment.
Methylene blue, methyl violet, and rhodamine B can also be decomposed by the novel, solvothermally synthesized Co-based MOFs -[Co 4 (bbibp) 5 (HCOO) 8 (H 2 O) 2 ] n and [Co(bimmb)(NO 3 ) 2 ] n (bbibp = 4,4-bis(imidazol-1-yl)biphenyl; bimmb = 1,4-bis(imidazol-1ylmethyl)benzene) [75]. After 75 min of UV irradiation, almost 100% of methylene blue, 49.2% of methyl violet, and 39% of rhodamine B were degraded using the first MOF. For the second material, the degradation rates of these dyes were as follows: 94%, 68.7%, 64.4%. The highest photocatalytic activity toward methylene blue may arise from the differences in the sizes of dye molecules, as due to the smaller molecule, more interactions between active sites and targets could occur. As stability is an important factor when photocatalysts are considered for industrial applications, MOFs have been reused in methylene blue degradation. The differences in their activity are almost imperceptible, therefore they can be successfully used in the photocatalytic degradation of dyes.
CUST-501-[Co 2 (H 2 O)(tfBDC) 2 (Phen) 2 ] (tfBDC = tetrafluoroterephtalic acid; Phen = 1,10-Phenanthroline monohydrate) is another MOF that has been used to eliminate dyes such as rhodamine B from water [77]. Its role as a catalyst is based on activating peroxymonosulfate (HSO 5 − ) under UV irradiation, which triggers the generation of free radicals (SO 4 •− ) ( Figure 3). A total of 100% of rhodamine B was degraded in about 15 min, which indicates that CUST-501 has potential in water treatment. Additionally, the photocatalyst shows unchanged efficiency after two recycling cycles.
tocatalysts are considered for industrial applications, MOFs have been reused in methylene blue degradation. The differences in their activity are almost imperceptible, therefore they can be successfully used in the photocatalytic degradation of dyes.
DABCO (1,4-diazabicyclo [2.2.2] octane) was used as a linker in the synthesis of yet another Co-MOF, which was subsequently encapsulated with methyl orange (MO) and methylene blue (MB) to obtain two composites-MO@Co-MOF and MB@Co-MOF. The effectiveness of all materials in the degradation of Eriochrome Black T under visible light was compared [79]. For Co-MOF, MO@Co-MOF, and MB@Co-MOF the photocatalytic efficiencies after four hours reached 78.9%, 92.0%, and 99.7%. The dyes loaded onto Co-MOF serve as an antenna that strongly captures the light. Moreover, they not only act as photosensitizers but also as electron donors for the Co-MOF photocatalyst. This results in the separation of charge carriers at the interface between sensitizer and photocatalyst. MB@Co-MOF was subjected to five recycles in order to check its reusability and photostability. A slight decrease (to 95.2%) in photoactivity was observed, which is caused by the small composite loss. Hydrothermal synthesis was conducted to obtain 3D Co(II) MOF-[Co(L) 0.5 (OBA)] n , based on H 2 OBA (4,4 -oxybis(benzoate)) and L (1,6-bis(5,6-dimethylbenzimidazolyl)hexane) ligands. This material has been utilized in methylene blue degradation, 93.8% of which was eliminated from water solution after 135 min of visible light irradiation [80]. The reaction mechanism involved inducing OBA 2− and L ligands to generate N-Co and/or O-Co charge transfer. As a result, photoinduced electrons from HOMO were transferred to LUMO. Returning to a stable state requires the delivery of an electron, which was obtained from H 2 O. In the meantime, the electron present in LUMO reduced O 2 in water to •O 2 − , which afterward reacted with H + . Hydroxyl radical formed from both H 2 O and •O 2 − is responsible for methylene blue photodegradation.
Anchoring trimetallic Cu-Co-Ni nanoparticles via direct impregnation onto aminomodified MOF-MIL-101(Fe) was applied to synthesize catalyst NH 2 -MIL-101(Fe)@CuCoNi, eliminating dyes such as methyl blue and crystal violet from wastewater [81]. The twohour continuous visible irradiation enabled the achievement of 99% and 93% dye removal rates, respectively. The composite retained the 83.1% degradation efficiency toward methyl blue and over 90% toward crystal violet, even after being reused five times. NH 2 -MIL-101(Fe)@CuCoNi displayed a higher rate of light utilization in addition to catalytic activity, compared to MIL-101(Fe) and NH 2 -MIL-101(Fe). The proposed mechanism of methyl blue degradation is based on its transition to the excited state (MB*) in an acidic environment ( Figure 4A). Electrons were transferred by MB* to the Cu-Co-Ni nanoparticles' or NH 2 -MIL-101(Fe) conduction bands. Due to the formed heterojunction, electrons from the conduction bands of Cu-Co-Ni nanoparticles and photogenerated electrons were moved to NH 2 -MIL-101(Fe) reducing Fe 3+ ions to Fe 2+ . Moreover, the leaching of Cu 2+ ions also resulted in their reduction to Cu + . This synergistic effect favours the generation of •OH. In the valence bands of Cu-Co-Ni nanoparticles, the reaction of the water molecule with the holes (h + ), formed by the constant electron irradiation, was carried out to produce •OH. The degradation mechanism of crystal violet in a weakly alkaline environment was similar ( Figure 4B). Oxygen adsorbed on the NH 2 -MIL-101(Fe) was converted by Fe 2+ and Cu + ions into •O 2 − . Additionally, holes that possessed oxidizing abilities mineralized dye molecules straightaway.  In this subsection, photocatalytic degradation as an effective strategy to remove dyes from the water is presented. Cobalt-based MOFs were willingly applied as catalysts in this process due to their efficiency, in addition to their high reuse potential. Organic pollutants such as methyl orange, methyl blue, methylene blue, methyl violet, or rhodamine B are most often subjected to photodegradation under light irradiation. With the use of Co-MOFs, the degradation yields frequently exceed 90%, even during a short reaction time, hence these materials show great potential in the elimination of various contaminants from water solutions ( Table 1).  In this subsection, photocatalytic degradation as an effective strategy to remove dyes from the water is presented. Cobalt-based MOFs were willingly applied as catalysts in this process due to their efficiency, in addition to their high reuse potential. Organic pollutants such as methyl orange, methyl blue, methylene blue, methyl violet, or rhodamine B are most often subjected to photodegradation under light irradiation. With the use of Co-MOFs, the degradation yields frequently exceed 90%, even during a short reaction time, hence these materials show great potential in the elimination of various contaminants from water solutions (Table 1).

Photocatalytic Water Oxidation
The oxidation of water, also known as the oxygen evolution reaction (OER), is a high energy barrier process that requires the transfer of four electrons. It can be triggered electrochemically or by the use of light. In the photo-driven water oxidation (PWO), the appropriate photosensitizer, catalyst, and sacrificial electron-hole donor are necessary. The purpose of PWO is to artificially mimic photosynthesis, the reactions of which occur on the surface of photocatalytically active materials [82]. The photocatalyst acts as a semiconductor that absorbs light and transfers solar energy to break chemical bonds in H 2 O. This leads to the generation of the active oxygen species (O•), hydroperoxy species (OOH), and/or metal species (M-O•) at the active metal sites of the catalyst. During this process, oxidation of water with subsequent conversion to O 2 takes place, which in acidic media can proceed as follows: 2H 2 O → O 2 + 4e − + 4H + and in the basic conditions: 4OH − → O 2 + 4e − + 2H 2 O. The oxidation process is also determined by light absorption, charge separation, and catalytic reaction on the surface. The most popular heterogeneous photocatalysts applied in PWO are TiO 2 , BiVO 4 , WO 3 , and α-Fe 2 O 3 . However, they encounter challenges related to the impaired four-electron migration kinetics, low light absorption, self-oxidation poisoning by photogenerated holes, and easy recombination of photogenerated charge carriers [83][84][85][86][87]. Hence, there is a great need for novel, highly active, reusable, and stable photocatalysts [10]. In the design of materials catalysing oxygen generation, it is important to develop strategies that can suppress recombination of electron-hole pair and photocorrosion of catalysts. The synthesis of composites characterized by high stability and the optimization of the catalytic reaction conditions allows photocatalysts to be protected against radiation damage [88,89]. When combining diverse materials, the different positions of the conduction and valence bands should be considered. Proper tailoring of the composite can affect the separation efficiency and the recombination rate of electron/hole pairs. In this case, cobalt acts mainly as a co-catalyst aiming to activate the other material with a wide band gap via accumulation of e − and h + [90,91]. In addition, cobalt as a dopant in MOFs tends to lower the overpotentials of the water oxidation process [92]. However, during the enrichment of the materials with cobalt species, the prevention of its leaching or inhomogeneous distribution should be taken into account.
MOFs are becoming increasingly popular in photocatalytic water oxidation due to the presence of linkers, capable of absorbing radiation as well as metal nodes that can act as catalytically active sites [51,[93][94][95]. Cobalt-based coordination complexes with organic ligands have been intensively studied in photocatalytic water oxidation in the last decade [96]. For instance, [Co II (Me 6 tren)(OH 2 )] 2+ (Me 6 tren = tris(N,N -dimethylaminoethyl)amine), [Co II (12-TMC)] 2+ (12-TMC = 1,4,7,10-tetramethyl-1,4,7,10-tetraazacyclododecane), and [Co III (Cp*)(bpy)(OH 2 )] 2 (Cp* = η 5 pentamethylcyclopentadienyl) were tested to evolve O 2 . However, such complexes were more likely to produce CO 2 rather than O 2 . This was caused by the oxidation of organic ligands and complex decomposition. Hence, cobalt complexes acted more as pre-catalysts, converting into catalytically active Co(OH) x nanoparticles [97]. Although there are reports suggesting ligand modification to stabilize Co-based complexes [98], MOFs have begun to displace them due to their unique properties. The far-reaching symmetry and iterative structure of MOFs, as well as their large specific surface area and increasing stability, have led to greater interest in their photocatalytic application [99].
OH − participate in the reaction, creating an oxygen vacancy that acts as a catalytic activ centre, capping four coplanar cobalt ions ( Figure 5). However, not all oxygen atoms from the Co4 cluster are simultaneously involved in the reaction. Moreover, oxygen coordi nated on the Co4 is replaced by water molecules before O2 generation. Interestingly, th MAF-48 remains unchanged during and after the photo-driven reaction of water oxida tion [100]. A popular approach to enhance the efficiency of photocatalytic reactions is to enrich MOFs with cobalt [101]. For instance, a non-cobalt MOF, MIL-101(Cr) (MIL = Material Institute Lavoisier) was impregnated with Co(NO3)2 as a precursor for cobalt oxide. Th resulting photocatalytically active composite was coupled with [Ru(bpy)3] 2+ in order to b sensitized. A MOF with immobilized cobalt oxide nanoparticles exhibited high stability in PWO, and neither leaching nor aggregation of the particles was observed during th process. The catalyst indicated a TOF of 0.012 s −1 per cobalt atom in photocatalytic wate oxidation, which is nine times higher than the TOF of corresponding Co3O4 without MOF support. However, the activity of the composite contributed to different cobalt species in the framework i.e., Co3O4, Co(NO3)2, and Co(OH)2 (molar ratio 77:17:6), which were es tablished via XPS analysis. As a result, the prepared composites often varied in cobal amounts, ranging from 1.4 to 4.9% wt. [102].
A POM@MOF composite was one of the first systems for oxygen evolution with th stable incorporation of two main components of photocatalysis (photosensitizer and cat alyst) within the MOF. Paille and co-workers [103] prepared MOF-545 with sandwich type polyoxometalate (P2W18Co4) for visible light-driven water oxidation at pH 8, in th presence of a Ru-based molecular photosensitizer. MOF-545 is made of Zr-oxide cluster and porphyrin moieties linkers known for their light-harvesting abilities, thereby reaction proceeded rapidly after light exposure (TOF = 0.04 s −1 ). The DFT calculations suggested that the active Co-OH2 sites are accessible at the MOF-POM interface, and they are located in a hydrophilic catalytic pocket, ideal for the transfer of protons and H2O molecules. Th same group synthesized POM@MOF composite in the form of thin films, which even fur ther enhanced catalytic activity in water oxidation. The main goal was to achieve a high A popular approach to enhance the efficiency of photocatalytic reactions is to enrich MOFs with cobalt [101]. For instance, a non-cobalt MOF, MIL-101(Cr) (MIL = Materials Institute Lavoisier) was impregnated with Co(NO 3 ) 2 as a precursor for cobalt oxide. The resulting photocatalytically active composite was coupled with [Ru(bpy) 3 ] 2+ in order to be sensitized. A MOF with immobilized cobalt oxide nanoparticles exhibited high stability in PWO, and neither leaching nor aggregation of the particles was observed during the process. The catalyst indicated a TOF of 0.012 s −1 per cobalt atom in photocatalytic water oxidation, which is nine times higher than the TOF of corresponding Co 3 O 4 without MOF support. However, the activity of the composite contributed to different cobalt species in the framework i.e., Co 3 O 4 , Co(NO 3 ) 2 , and Co(OH) 2 (molar ratio 77:17:6), which were established via XPS analysis. As a result, the prepared composites often varied in cobalt amounts, ranging from 1.4 to 4.9% wt. [102].
A POM@MOF composite was one of the first systems for oxygen evolution with the stable incorporation of two main components of photocatalysis (photosensitizer and catalyst) within the MOF. Paille and co-workers [103] prepared MOF-545 with sandwichtype polyoxometalate (P 2 W 18 Co 4 ) for visible light-driven water oxidation at pH 8, in the presence of a Ru-based molecular photosensitizer. MOF-545 is made of Zr-oxide clusters and porphyrin moieties linkers known for their light-harvesting abilities, thereby reaction proceeded rapidly after light exposure (TOF = 0.04 s −1 ). The DFT calculations suggested that the active Co-OH 2 sites are accessible at the MOF-POM interface, and they are located in a hydrophilic catalytic pocket, ideal for the transfer of protons and H 2 O molecules. The same group synthesized POM@MOF composite in the form of thin films, which even further enhanced catalytic activity in water oxidation. The main goal was to achieve a high activity in oxygen evolution without the presence of noble metals, along with maintaining robustness and recyclability. The MOF acted again as a light-sensitive host for cobalt catalysts entrapped within the framework. The cobalt-based POM (P 2 W 18 Co 4 ) with MOF-545 were deposited on the indium tin oxide using various techniques such as drop-casting (DC) and electrophoresis (EP). It was confirmed that thin films are more effective in the water oxidation than the composite illuminated in suspension, with the following activity (TON): DC (1600) > EP (403) > suspension (75). Additionally, the films do not need to be centrifuge for reuse, hence there is no potential loss of material [104].
Another interesting example of a catalyst for water oxidation is MIL-101(Fe) encapsulated with cobalt-based polyoxometalate materials (POMs) i.e., Co 2 and Co 4 ([Co II Co III W 11 . POM@MOF composites revealed a non-leaching effect, which happens often in the case of MOFs doped with a single metal, cobalt oxides, and hydroxides. Moreover, POM@MOF showed significant structural stability and remarkable reusability without loss of activity in photocatalytic water oxidation. In the light-driven process, the composite acted as a light-harvester in the presence of the photosensitizer. The enhanced photocatalytic activity of Co 2 and Co 4 can be related to the precise embedding of the POMs in the MOF and stabilization by electrostatic interactions. Adequate encapsulation of the POMs in the MOF cavities is only possible through an in situ reaction. More precisely, the POMs (25; 29 Å) must be smaller than the cavities but larger than the MOF window size (5.5; 8.6 Å). The combination of the two materials enabled effective oxidation of water because of the efficient ability of the POMs to separate electrons and holes. In the case of POMs, electrons are promoted to the sacrificial electron acceptor (Na 2 S 2 O 8 ) via a photosensitizer, but the performance of this promotion is enhanced due to better absorption of visible light caused by the presence of MOFs. Moreover, the light absorption is higher for the composite than for the MOF alone, indicating that the combination of these materials increases their effectiveness in OER [101].
MOFs can create core-shell structures, as in Co-MOF-74@ZIF-67 catalysts via ligand exchange. While both MOFs consist of cobalt in nodes, they differ in linkers: ZIF-67 has 2-methylimidazole and Co-MOF-74 contains 2,5-dihydroxyterephthalic acid. ZIF-67 constitutes the core of the material and through controlled ligand exchange, it was possible to build Co-MOF-74 on its surface, which formed the shell ( Figure 6). During the coreshell formation, it was feasible to control the thickness of the outer MOF layer from 10 to 50 nm. The composite showed high oxygen evolution potential during water oxidation at pH 9.0 under visible light (420 nm). Moreover, it was recycled up to five times without a significant decrease in its activity. The oxygen generation efficiency was found to be for ZIF-67-9.8 µmol, and for Co-MOF-74-11.8 µmol, respectively. Combining the materials and using the system with the thickest shell resulted in 15 µmol of O 2 evolution. Attempts to increase the thickness of the shell by decreasing the molar ratio of ZIF-67 to the modifier led to the disintegration of particles morphology and amorphous bulk crystals were formed. However, this procedure can be extended, and different tricarboxylic linkers could be used to build up the shells of other types. It indicates that the presented method has a chance for further development in the light-driven oxygen evolution [105].
larger than the MOF window size (5.5; 8.6 Å). The combination of the two materia bled effective oxidation of water because of the efficient ability of the POMs to se electrons and holes. In the case of POMs, electrons are promoted to the sacrificial e acceptor (Na2S2O8) via a photosensitizer, but the performance of this promotion hanced due to better absorption of visible light caused by the presence of MOFs. ver, the light absorption is higher for the composite than for the MOF alone, ind that the combination of these materials increases their effectiveness in OER [101].
MOFs can create core-shell structures, as in Co-MOF-74@ZIF-67 catalysts via exchange. While both MOFs consist of cobalt in nodes, they differ in linkers: ZIF-67 methylimidazole and Co-MOF-74 contains 2,5-dihydroxyterephthalic acid. ZIF-67 tutes the core of the material and through controlled ligand exchange, it was pos build Co-MOF-74 on its surface, which formed the shell ( Figure 6). During the cor formation, it was feasible to control the thickness of the outer MOF layer from 1 nm. The composite showed high oxygen evolution potential during water oxidatio 9.0 under visible light (420 nm). Moreover, it was recycled up to five times withou nificant decrease in its activity. The oxygen generation efficiency was found to be f 67-9.8 µmol, and for Co-MOF-74-11.8 µmol, respectively. Combining the materi using the system with the thickest shell resulted in 15 µmol of O2 evolution. Attem increase the thickness of the shell by decreasing the molar ratio of ZIF-67 to the m led to the disintegration of particles morphology and amorphous bulk crystal formed. However, this procedure can be extended, and different tricarboxylic could be used to build up the shells of other types. It indicates that the presented m has a chance for further development in the light-driven oxygen evolution [105].  Saliba et al. [106] prepared a nanometric (300 nm) ZIF-67 for oxygen evolution. They investigated the effect of pH and catalyst concentration on the catalytic activity of MOF in the oxidation of water. ZIF-67 acted as an electrocatalyst, accepting electrons from the photosensitizer [Ru(bpy) 3 ] 2+ . The system was tested in a wide pH range from 2.1 to 13.1, in which the catalyst maintained a stable current density and thus remained active. The highest concentration of evolved O 2 was 117.2 µmol, with a high reaction rate (TOF = 0.035 s −1 ) at a basic pH (9.0). It was observed that increasing the amount of MOF decreased its catalytic activity. It is worth noting that unmodified ZIF-67 is unstable in aqueous solutions [107], where hydrolysis of coordination bonds between nodes and linkers may occur. Therefore, the catalytic activity of ZIF-67 in aqueous solutions should also be ascribed to the released cobalt moieties. To stabilize ZIF-67, it can be modified [108], embedded on a suitable substrate [109], or doped with heteroatoms [110]. Ultrathin ZIF-67 nanosheets introduced on the α-Fe 2 O 3 hematite photoanodes can also be utilized as a catalyst for photoelectrochemical water oxidation (Figure 7). The cobalt cations present in ZIF-67 were ideal for the hole storage capability and effective charge transfer. It was the result of the high surface capacitance and very low surface charge transfer resistance. Additionally, MOF had a high amount of unsaturated Co-N x , which provided chemisorption of oxygen species such as OH and OOH, and intense oxygen evolution [111].
suitable substrate [109], or doped with heteroatoms [110]. Ultrathin ZIF-67 nanosheets introduced on the α-Fe2O3 hematite photoanodes can also be utilized as a catalyst for photoelectrochemical water oxidation (Figure 7). The cobalt cations present in ZIF-67 were ideal for the hole storage capability and effective charge transfer. It was the result of the high surface capacitance and very low surface charge transfer resistance. Additionally, MOF had a high amount of unsaturated Co-Nx, which provided chemisorption of oxygen species such as OH and OOH, and intense oxygen evolution [111]. Dong et al. [112] reported a unique core-shell structure, synthesized using Co-Co Prussian blue (PB), an archetype of MOF characterized by a nanocubic structure. It consists of cyanide ligands (-CN-), coordinated octahedrally with transition metal ions. Co-Co/PB was applied as a precursor for CoP/NC-a cobalt(II) phosphide embedded in nitrogen and carbon matrices and prepared via phosphidation pyrolysis. The material obtained was distinguished by a core-shell CoP@CoOx structure, which ensured the electron transport under light irradiation (460 nm) for oxygen evolution. The amount of 4.5 mg of the catalyst exhibited the best performance at pH 8, yielding 901.5 mmol g −1 h −1 of the O2.
Similar to MOFs are metal-organic cages (MOCs), which are also composed of metal nodes and organic linkers but form supramolecular coordination complexes without longrange ordering. The highly catalytically active sites in MOC-1 i.e., Co-O and bis(µ-oxo)dicobalt sites, showed potential for photoinduced water oxidation under visible light (470 nm LED lamp), in the presence of a photosensitizer [Ru(bpy)3]Cl2 and Na2S2O8 as the electron scavenger [113]. It was proved that the process is initiated through the transfer of electrons from excited Ru(bpy)] 2+ * to Na2S2O8. Subsequently, electrons originating from bis(µ-oxo)dicobalt and Co-O sites of MOC-1 are accepted by the oxidized [Ru(bpy)3] 3+ , which facilitates water oxidation. The cobalt-based MOC-1 exhibited high stability and reusability, with only 1.85% of Co leaching out after the process. In comparison to other Dong et al. [112] reported a unique core-shell structure, synthesized using Co-Co Prussian blue (PB), an archetype of MOF characterized by a nanocubic structure. It consists of cyanide ligands (-CN-), coordinated octahedrally with transition metal ions. Co-Co/PB was applied as a precursor for CoP/NC-a cobalt(II) phosphide embedded in nitrogen and carbon matrices and prepared via phosphidation pyrolysis. The material obtained was distinguished by a core-shell CoP@CoO x structure, which ensured the electron transport under light irradiation (460 nm) for oxygen evolution. The amount of 4.5 mg of the catalyst exhibited the best performance at pH 8, yielding 901.5 mmol g −1 h −1 of the O 2 .
Similar to MOFs are metal-organic cages (MOCs), which are also composed of metal nodes and organic linkers but form supramolecular coordination complexes without long-range ordering. The highly catalytically active sites in MOC-1 i.e., Co-O and bis(µ-oxo)dicobalt sites, showed potential for photoinduced water oxidation under visible light (470 nm LED lamp), in the presence of a photosensitizer [Ru(bpy) 3 ]Cl 2 and Na 2 S 2 O 8 as the electron scavenger [113]. It was proved that the process is initiated through the transfer of electrons from excited Ru(bpy)] 2+ * to Na 2 S 2 O 8 . Subsequently, electrons originating from bis(µ-oxo)dicobalt and Co-O sites of MOC-1 are accepted by the oxidized [Ru(bpy) 3 ] 3+ , which facilitates water oxidation. The cobalt-based MOC-1 exhibited high stability and reusability, with only 1.85% of Co leaching out after the process. In comparison to other MOCs, such as MOC-2, MOC-3, MOC-4, the presence of both cobalt active sites in MOC-1 provided the best oxygen evolution rate (80.4 mmol g −1 h −1 ), showing their necessity for superior efficiency for superior efficiency [114].

Photocatalytic Water Splitting
Water splitting is a process of evolving hydrogen and oxygen (2H 2 O → 2H 2 + O 2 ), the main purpose of which is to achieve scalable and cost-viable solar hydrogen production ( Figure 8). In recent years, interest in this process has been growing has it does not generate greenhouse gases. One of the main approaches for water splitting and the generation of H 2 is to use photocatalysts with appropriate thermodynamic potential, a narrow band gap to harvest light, and an indication of resistance to photocorrosion [115]. Therefore, to enhance the efficiency of photoelectrocatalytic (PEC) water splitting, co-catalysts on semiconductors are often used. They not only provide additional catalytically active sites, but also facilitate redox reactions by suppressing charge recombination and unwanted reverse reactions [116]. At the moment, the quantum efficiency of current photocatalysts is usually less than 10%. There are reports of external quantum efficiencies up to ca. 96% [117], but these are rarely reproduced. Effective photocatalytic water splitting requires complex semiconductor systems coupled with catalysts operating in a broad light spectrum.
iconductors are often used. They not only provide additional catalytically active sites, but also facilitate redox reactions by suppressing charge recombination and unwanted reverse reactions [116]. At the moment, the quantum efficiency of current photocatalysts is usually less than 10%. There are reports of external quantum efficiencies up to ca. 96% [117], but these are rarely reproduced. Effective photocatalytic water splitting requires complex semiconductor systems coupled with catalysts operating in a broad light spectrum. In recent years, cobalt-based co-catalysts for water splitting i.e., Co(OH)2, CoP, Co3O4, Co3N, CoSe2, and Co(Sx), have been appreciated for their high activity, low price, and robustness [90]. In the case of Co-MOFs, the stability and costs are mainly determined by the organic linkers. The linker synthesis is often complex, and they can decompose at high temperatures or diffuse out of the material in poorly chosen solvents [118]. When considering Co-MOFs as photocatalysts for redox reactions, in addition to stability, they should have a higher work function than n-type semiconductors. Due to the low Fermi level of the Co-based photocatalytic system, the induced electric field has to form a Schottky junction [90]. This is a potential barrier at the metal-semiconductor interface. MOFs can behave similar to microporous semiconductors that exhibit charge-separated states when exposed to light [119][120][121]. In the design of catalysts for hydrogen generation, as for the oxygen evolution process, it is necessary to ensure their protection against photocorrosion by composite formation or material coating. Moreover, it has been established that the materials for water splitting, should cover a range of potentials for oxidation (+1.23 V) and reduction (0 V) of water, with respect to the normal hydrogen electrode (NHE). However, if the goal is mainly the hydrogen generation, it is important to focus on the selectivity of the catalyst [115]. One such method is the creation of ternary catalysts e.g., Co-MOF based In recent years, cobalt-based co-catalysts for water splitting i.e., Co(OH) 2 , CoP, Co 3 O 4 , Co 3 N, CoSe 2 , and Co(S x ), have been appreciated for their high activity, low price, and robustness [90]. In the case of Co-MOFs, the stability and costs are mainly determined by the organic linkers. The linker synthesis is often complex, and they can decompose at high temperatures or diffuse out of the material in poorly chosen solvents [118]. When considering Co-MOFs as photocatalysts for redox reactions, in addition to stability, they should have a higher work function than n-type semiconductors. Due to the low Fermi level of the Co-based photocatalytic system, the induced electric field has to form a Schottky junction [90]. This is a potential barrier at the metal-semiconductor interface. MOFs can behave similar to microporous semiconductors that exhibit charge-separated states when exposed to light [119][120][121]. In the design of catalysts for hydrogen generation, as for the oxygen evolution process, it is necessary to ensure their protection against photocorrosion by composite formation or material coating. Moreover, it has been established that the materials for water splitting, should cover a range of potentials for oxidation (+1.23 V) and reduction (0 V) of water, with respect to the normal hydrogen electrode (NHE). However, if the goal is mainly the hydrogen generation, it is important to focus on the selectivity of the catalyst [115]. One such method is the creation of ternary catalysts e.g., Co-MOF based Co/CoN/Co 2 P or NiCo 2 S 4 /ZnIn 2 S 4 /Co 3 O 4 composites [122,123]. Ternary photocatalysts are composed of three different materials that complement each other and generate multiphoton excitations. They can also utilize the heterojunction to drive electronic processes in the desired direction. In this way, photoexcitation of localized electronic states to achieve improved selectivity can be attained. On the technical side, the design and selection of the photoreactor have a major impact on selectivity of the process. Recently, the monolith reactor has attracted attention, instead of slurry, fluidized, fixed bed and optical fiber reactors. This is mainly characterized by a larger irradiation area and the use of photon energy, which increases hydrogen production [115].
While broadening the absorption spectrum of MOFs for more efficient light-harvesting is still in its infancy, one of the first approaches to achieve this was to exploit the energy transfer between ZIF-67 and the sensitizing chromophore RuN3 (cis-diisothiocyanatobis(2,2 -bipyridyl-4,4 -dicarboxylic acid) ruthenium(II)). Yang et al. [124] synthesized a ZIF-67 film with a UV-Vis spectrum containing spin-allowed d-d transition band at 585 nm. In turn, for the obtained RuN3@ZIF-67 composite, additional absorption bands at 385 and 535 nm were noticed. Moreover, the energy transfer from the excited photosensitizer to the MOF occurs with an efficiency of~87%. Such a system resulted in enhanced photoinduced absorption and ground state bleach recovery and, hence, ultimately led to an increase in water splitting and H 2 evolution (48.5 µmol g −1 ). It is worth noting that the induction period for Co-MOFs was observed similarly to other photocatalytically active materials for hydrogen generation. The induction period is the reaction time window needed for hydrogen evolution. Depending on the catalyst and reaction conditions, the processes may differ in terms of hydrogen generation time. For RuN3@ZIF-67, the induction period was two hours before H 2 evolution commences, thereby it can be considered as a limitation because it extends the process time.
ZIF-67 has been further investigated in sensitizing systems, but revealed better performance after specific modifications i.e., oxidation (O-ZIF-67), phosphating (P-ZIF-67), and sulfidizing (S-ZIF-67). ZIF-67 is known for its polyhedral particle morphology. Interestingly, each modification did not result in the loss of polyhedron shape. The modified ZIF-67 samples were characterized by increased catalytic activity in the process of hydrogen generation compared to unmodified ZIF-67. It was found that linkers can hinder the absorption of H + at the cobalt metal centres, thus their isolation can lead to a better catalytic performance. Taking P-ZIF-67 as an example, it is shown that free electron pairs are present in Co atoms (3d orbital) and P atoms (3p orbital), ensuring easy electron transfer and protons absorption from the excited water molecules. At the same time, electrons can flow from the photosensitizer to the Co atoms, while P atoms absorb electrons from Co due to their stronger electronegativity. This resulted in increased electron density around the P and Co atoms, and the bi-active sites further boosted proton uptake and hydrogen production [125].
Gascon and co-workers [126] presented another way to significantly improve the catalytic activity of NH 2 -MIL-125(Ti) in the generation of hydrogen via its doping with cobalt species. The modification led to a 20 times more effective catalytic process compared to the pristine MOF, resulting in an external quantum efficiency of 0.5%. It was suggested that cobaloxime is formed within the porous framework, although the specific structure of the cobalt species has not yet been elucidated. Meanwhile, the proposition mechanism was presented as follows: (i) at first, the linkers absorb photons, (ii) then, charge separation occurs to generate Ti 3+ , (iii) finally, a hole is generated in the linker. The electron deficiency causes the linker to react with an electron donor (triethylamine) and at the same time electrons are rapidly transferred to the cobalt. Consequently, it is reduced from Co III to Co II and becomes a highly active catalytic site, where H 2 evolution occurs. Moreover, the Co@MOF composite displayed high TOF stability (0.8 h −1 ) after 65 h of continuous use, maintaining reusability without a significant decrease in the activity.
The nature of MOFs as coordination polymers forces researchers to increase their thermal, pH, and solvent stability. In order to conduct catalytic reactions in aqueous solutions, they must be stable in water, which has been ensured in the case of the largely porous (50.7%) Co 3 -XL of formula {[Co 3 (µ 3 -O)(XL) 3 Cl 3 ]OH × 11.5H 2 O} n . It is a MOF composed of cobalt clusters [Co3(µ 3 -O)] and XL linker (N,N -bicyclo [2.2.2]oct-7-ene-2,3,5,6-tetracarboxdiimide bi(1,2,4-triazole)), rich in uncoordinated carbonyl oxygen atoms. The material is distinguished by the two-fold interpenetrated MOFs formed by linkage between the nodes of the 6-c octahedral configuration and the catenated ligand. It results in two sets of identical 3D structures that are intertwined ( Figure 9). Interestingly, Co 3 -XL proved to be capable of adsorbing water vapor (192 cm 3 ), which increases the contact area between the reagent and the active sites in the water splitting process. MOF was additionally loaded with Pt as a co-catalyst, which was able to capture photoelectrons with a narrow band gap (1.82 eV). At the same time, ethanol served as a sacrificial agent to compensate for the photogenerated holes. As result, Co 3 -XL showed H 2 evolution of 23.05 µmol g −1 h −1 , with better photocurrent than a single ligand and maintained solvent stability [127].
of identical 3D structures that are intertwined (Figure 9). Interestingly, Co3-XL proved to be capable of adsorbing water vapor (192 cm 3 ), which increases the contact area between the reagent and the active sites in the water splitting process. MOF was additionally loaded with Pt as a co-catalyst, which was able to capture photoelectrons with a narrow band gap (1.82 eV). At the same time, ethanol served as a sacrificial agent to compensate for the photogenerated holes. As result, Co3-XL showed H2 evolution of 23.05 µmol g −1 h −1 , with better photocurrent than a single ligand and maintained solvent stability [127]. No need for co-catalyst or co-sensitizer has been demonstrated in the unique ultrathin 2D nanosheets consisting of ruthenium sensitizer incorporated in MOF crystals with different inorganic building units. The sensitizing polypyridyl ruthenium complexes have favourable HOMO/LUMO levels and long-lived excited states, which did not change distinctly after incorporation into MOF. The MOF nodes were 3d transition-metal cations, of which the best hydrogen evolution efficiency indicated Ni 2+ and Co 2+ . In the case of the Co-Ru system (Co0.5[Ru(tpyCOO)2]PF6), each Co cation coordinates with four carboxylate groups from linkers and forms a distorted tetrahedral geometry. The ruthenium linkers constitute a bridge between two metallic nodes, resulting in a 4-connected network with sql topology and rhombohedral topology of the 2D network. Interestingly, the sheets exhibited strong absorbance (480 nm) at acidic pH (3)(4)(5), which can be assigned to the metalto-ligand charge transfer. The reduction in protons and H2 evolution occurred through the excited Ru linkers, yielding 589 µmol g −1 h −1 and 923 µmol g −1 h −1 of H2 for the Co-Ru and Ni-Ru, respectively [128].
The great potential of MOFs and the methods available for their modification or enrichment with other compounds have contributed to their use as precursors for novel photoactive materials, for example, MOF-derived onion slice-type hollow cobalt sulfide nanostructures. A Co-MOF, composed of cobalt nodes and isophthalic acid linkers, was used as a template for the onion-like Co3O4, which was subsequently converted to Co4S3 and doped with CdS nanoparticles. A MOF was utilized in this procedure due to its hollow structure, which allows a huge volume/mass reduction in Co4S3 and onion slice shape No need for co-catalyst or co-sensitizer has been demonstrated in the unique ultrathin 2D nanosheets consisting of ruthenium sensitizer incorporated in MOF crystals with different inorganic building units. The sensitizing polypyridyl ruthenium complexes have favourable HOMO/LUMO levels and long-lived excited states, which did not change distinctly after incorporation into MOF. The MOF nodes were 3d transition-metal cations, of which the best hydrogen evolution efficiency indicated Ni 2+ and Co 2+ . In the case of the Co-Ru system (Co 0.5 [Ru(tpyCOO) 2 ]PF 6 ), each Co cation coordinates with four carboxylate groups from linkers and forms a distorted tetrahedral geometry. The ruthenium linkers constitute a bridge between two metallic nodes, resulting in a 4-connected network with sql topology and rhombohedral topology of the 2D network. Interestingly, the sheets exhibited strong absorbance (480 nm) at acidic pH (3)(4)(5), which can be assigned to the metal-to-ligand charge transfer. The reduction in protons and H 2 evolution occurred through the excited Ru linkers, yielding 589 µmol g −1 h −1 and 923 µmol g −1 h −1 of H 2 for the Co-Ru and Ni-Ru, respectively [128].
The great potential of MOFs and the methods available for their modification or enrichment with other compounds have contributed to their use as precursors for novel photoactive materials, for example, MOF-derived onion slice-type hollow cobalt sulfide nanostructures. A Co-MOF, composed of cobalt nodes and isophthalic acid linkers, was used as a template for the onion-like Co 3 O 4 , which was subsequently converted to Co 4 S 3 and doped with CdS nanoparticles. A MOF was utilized in this procedure due to its hollow structure, which allows a huge volume/mass reduction in Co 4 S 3 and onion slice shape formation. It provided a shorter path for the mass and charge transport in the Co 4 S 3 /CdS composite during the H 2 evolution process. The composite generated a much higher amount of H 2 (12,360 µmol g −1 h −1 ) than pristine CdS (450 µmol g −1 h −1 ) [129].
In the photocatalytic reactions of water oxidation and water splitting, the main advantage of cobalt in MOF systems is its versatility ( Table 2). Cobalt tends to form multiple oxo-clusters at nodes and has the ability to coordinate to various linkers forming unique complexes and stable MOFs. The materials with Co can be catalytically active, serve as semiconductors, or interact directly with solar energy as light-harvesters. Cobalt can be a metal node, a co-catalyst, an additive that increases charge separation, or an atom that acts as an electron transfer element to more catalytically active centres. Moreover, on the basis of presented reports, it has been proved that Co-based MOFs become more stable and can undergo many processes in aqueous solutions under various conditions. In addition, Co-MOFs and the materials derived from them can be easily recovered from the reaction system, which contributes to their high renewability.

Photocatalytic Carbon Dioxide Reduction
Carbon dioxide is one of the major greenhouse gases, the emission of which has been attempted to be reduced for decades [130,131]. Industrialization has notably contributed to the increase in the amount of CO2 in the atmosphere. Agriculture, transport, energy, and buildings are the main sources of CO 2 emission. Despite many warnings, fossil fuels continue to be burned extensively. Even though restrictions have been implemented globally, a significant reduction in CO2 generation is far on the horizon [132][133][134]. Thereupon, efforts are being made to develop an efficient process for its conversion [135]. Photocatalytic reduction of CO 2 seems to be an ideal solution, wherein this gas is captured and then converted into high-value compounds [136]. From a thermodynamic perspective, CO 2 energy grade is low, therefore its conversion requires an energy contribution [137]. In the ongoing research on photocatalytic CO 2 reduction, the main concern is the unsatisfactory reaction efficiency and the low selectivity of the obtained products. Moreover, in CO 2 reduction, there is a high probability of water reduction and H 2 evolution, which is a competing process. Regarding the fact that carbon in CO 2 is in the highest possible oxidation state, it can be reduced to many different products ( Figure 10). These are predominantly compounds with one carbon atom, such as CO, CH 4 , CH 3 OH, HCHO, and HCOOH. Products with two carbon atoms bonded (e.g., ethylene, acetylene, ethanol) are rare because it is difficult to stabilize single carbon radicals [138,139]. MOFs address many problems associated with photocatalytic processes due to their unique features. In the case of reaction with gases, MOFs show high potential in CO 2 capture [140]. If the high adsorption capacity is properly coupled with the photoelectrocatalytic properties of MOFs, it can result in high-performance materials [141]. The general mechanism of CO 2 reduction with MOFs proceeds in the following manner. In the beginning, light excites a photosensitizer, which then undergoes reductive quenching by a sacrificial electron donor. The reduced photo-sensitizer donates its electrons to the MOF with adsorbed CO 2 . At this stage, the CO 2 is reduced to CO 2 *. Subsequently, the CO 2 * accepts protons generated from the decomposition of H 2 O and forms an COOH* intermediate to be further reduced to CO*. Then, CO* is desorbed, resulting in the formation of CO [48]. state, it can be reduced to many different products ( Figure 10). These are predominantly compounds with one carbon atom, such as CO, CH4, CH3OH, HCHO, and HCOOH. Products with two carbon atoms bonded (e.g., ethylene, acetylene, ethanol) are rare because it is difficult to stabilize single carbon radicals [138,139]. MOFs address many problems associated with photocatalytic processes due to their unique features. In the case of reaction with gases, MOFs show high potential in CO2 capture [140]. If the high adsorption capacity is properly coupled with the photoelectrocatalytic properties of MOFs, it can result in high-performance materials [141]. The general mechanism of CO2 reduction with MOFs proceeds in the following manner. In the beginning, light excites a photosensitizer, which then undergoes reductive quenching by a sacrificial electron donor. The reduced photosensitizer donates its electrons to the MOF with adsorbed CO2. At this stage, the CO2 is reduced to CO2*. Subsequently, the CO2* accepts protons generated from the decomposition of H2O and forms an COOH* intermediate to be further reduced to CO*. Then, CO* is desorbed, resulting in the formation of CO [48]. In the development of materials for CO2 reduction, systems capable of generating multielectrons are required [90]. For a MOF as a catalyst, the LUMO must be above the redox potential for the CO2 reduction half-reaction, which depends on the resulting product. For by far the most common CO2-to-CO conversion via Co-based MOF photocatalysts, the reduction potential is -0.53 V. By tuning the MOF composition, one can influence the optical and electronic responses i.e., HOMO and LUMO energy levels. In addition, the sorption capacity of the MOF is very important. Therefore, its textural parameters (e.g., surface area, pore volume) and improved affinity towards CO2 (e.g., by amine functionalities) must be attained in order to proceed efficient photoreduction [142]. For an effective CO2 conversion process, accessibility to the active sites is vital, thus 2D nanosheet MOFs with better exposed active sites are preferred. Defect engineering also contributes to improved access to nodes. Furthermore, defects play an important role in the excited state and charge relaxation pathways. Higher defect concentrations lead to longer excited-state lifetimes. This is attributed to the trapping of electrons in oxygen vacancies and holes in hydroxyl groups at the surface, which have been shown to play an important role in the CO2 reduction mechanism [143]. The conversion of CO2 can often lead to the formation of many products, but also to the generation of hydrogen from water. Therefore, it is quite challenging to design a material that has high selectivity for a single product without carrying out trial studies. The selectivity of Co-MOFs to receive one type of product in excess In the development of materials for CO 2 reduction, systems capable of generating multielectrons are required [90]. For a MOF as a catalyst, the LUMO must be above the redox potential for the CO 2 reduction half-reaction, which depends on the resulting product. For by far the most common CO 2 -to-CO conversion via Co-based MOF photocatalysts, the reduction potential is −0.53 V. By tuning the MOF composition, one can influence the optical and electronic responses i.e., HOMO and LUMO energy levels. In addition, the sorption capacity of the MOF is very important. Therefore, its textural parameters (e.g., surface area, pore volume) and improved affinity towards CO 2 (e.g., by amine functionalities) must be attained in order to proceed efficient photoreduction [142]. For an effective CO 2 conversion process, accessibility to the active sites is vital, thus 2D nanosheet MOFs with better exposed active sites are preferred. Defect engineering also contributes to improved access to nodes. Furthermore, defects play an important role in the excited state and charge relaxation pathways. Higher defect concentrations lead to longer excited-state lifetimes. This is attributed to the trapping of electrons in oxygen vacancies and holes in hydroxyl groups at the surface, which have been shown to play an important role in the CO 2 reduction mechanism [143]. The conversion of CO 2 can often lead to the formation of many products, but also to the generation of hydrogen from water. Therefore, it is quite challenging to design a material that has high selectivity for a single product without carrying out trial studies. The selectivity of Co-MOFs to receive one type of product in excess is still unclear. It requires a combination of theoretical calculations and the compilation of many parameters that represent a large system of variables during the process. In general, for any cobalt-based semiconductor, it is important to study the light intensity and photon energy, which must be applied to excite semiconductors. The photo-generated electrons and holes affect the kinetics of the reduction rate and ultimately the product selectivity. By attempting to select appropriate co-catalysts, it is possible to mitigate their effect on selectivity. Additionally, a key step is the desorption of the product from the material, which, if hindered, can result in low yields and poor selectivity. In photocatalytic CO 2 conversion, it is necessary to couple a gas chromatography system equipped with a thermal conductivity detector (TCD), a hydrogen flame ionization detector (FID), and mass spectrometry to rigorously monitor the reaction products. By combining excitation features, catalyst and co-catalyst band structures, charge separation efficiency, and reactions on the material surface, it will be attainable to control product selectivity and material efficiency [138].
Ye et al. [148] reported two composites-ZIF-67 with Zn-MOF and a dinuclear cobaltcomplex [Co 2 (OH)L](ClO 4 ) 3 (L = N[(CH 2 ) 2 NHCH 2 (m-C 6 H 4 )CH 2 NH(CH 2 )] 3 N) with Zn-MOF. The zinc-based MOF was applied as a photosensitizer. The cobalt complex and ZIF-67, both acted as co-catalysts present in the solution and accompanied the CO 2 photoreduction to CO (Figure 11). They increased the formation of CO and the selectivity over H 2 evolution. TONs and CO selectivity were 26.2, 78.9% for the bulk Zn-MOF and 68.7, 81.5% for Zn-MOF/Co-complex. In the case of Zn-MOF/ZIF-67, values were the highest-117.8, 91.0%. The photoelectrochemical impedance and photoluminescence studies suggest that the increased catalytic activity comes from the improved charge-transport capability, enhanced charge separation, and longer life duration of the photogenerated charge carriers. Porphyrin (POR) based MOFs with Co(II) as metal sites, showed 1.7 times higher photocatalytic performance in the CO formation (0.4 µmol g −1 h −1 ) than corresponding Ni-POR. The structure of porphyrin boosts the absorption of visible light, similar to an antenna. Porphyrin units have the ability to propagate excitons and exhibit anisotropic energy transport across multiple struts from the originally excited strut [149]. The linkers are responsible only for light absorption, and the catalytic performance depends solely on the metallic Co nodes. The recombination rate of electron-hole pairs in Co-POR is lower than in the Ni-based MOF. The cobalt metallic sites provide various electron traps, and they also indicate higher CO2 adsorption energy of 17.92 kJ mol −1 (Ni-POR 16.37 kJ mol −1 ). Consequently, CO2 was more easily activated to CO2* on the Co-POR, than on the Ni-POR [150]. Porphyrin-based MOF-525-Co with atomically dispersed Co catalytic sites showed great enhancement of 3.13-fold in the evolution of CO (200 µmol g −1 h −1 ), and 5.93-fold in CH4 generation (36.67 µmol g −1 h −1 ) compared to the parent MOF. The pristine MOF-525 is a Zr-based framework (Zr6O4(OH)4(TCPP-H2)3 with TCPP linkers [TCPP = 4,4′,4′',4′''-(porphyrin-5,10,15,20-tetrayl)tetrabenzoate]. An increased CO2 reduction is related to the stronger affinity toward gaseous adsorbates after the metallization of pristine MOF-525. Interestingly, spectroscopic studies of single Co, MOF-525, and MOF-525-Co proved the presence of unique Co-N species in the doped MOF. Visible-light irradiation induced high-spin state Co II valence transformation to low-spin state Co I . It was also found, that the coordination between the porphyrin ring and the Co sites most likely leads to efficient closure of the electron transfer channels from the porphyrin units to the Zr oxo-clusters Figure 11. A MOF/Co-complex or MOF/ZIF-67 system for CO 2 photoreduction with Zn-MOF nanosheets as the photosensitizer and Co-based materials as photocatalysts (Reprinted with permission [148]. Copyright 2018 Elsevier).
Porphyrin (POR) based MOFs with Co(II) as metal sites, showed 1.7 times higher photocatalytic performance in the CO formation (0.4 µmol g −1 h −1 ) than corresponding Ni-POR. The structure of porphyrin boosts the absorption of visible light, similar to an antenna. Porphyrin units have the ability to propagate excitons and exhibit anisotropic energy transport across multiple struts from the originally excited strut [149]. The linkers are responsible only for light absorption, and the catalytic performance depends solely on the metallic Co nodes. The recombination rate of electron-hole pairs in Co-POR is lower than in the Ni-based MOF. The cobalt metallic sites provide various electron traps, and they also indicate higher CO 2 adsorption energy of 17.92 kJ mol −1 (Ni-POR 16.37 kJ mol −1 ). Consequently, CO 2 was more easily activated to CO 2 * on the Co-POR, than on the Ni-POR [150]. Porphyrin-based MOF-525-Co with atomically dispersed Co catalytic sites showed great enhancement of 3.13-fold in the evolution of CO (200 µmol g −1 h −1 ), and 5.93-fold in CH 4 generation (36.67 µmol g −1 h −1 ) compared to the parent MOF. The pristine MOF-525 is a Zr-based framework (Zr 6 O 4 (OH) 4 (TCPP-H 2 ) 3 with TCPP linkers [TCPP = 4,4 ,4 ',4 "-(porphyrin-5,10,15,20-tetrayl)tetrabenzoate]. An increased CO 2 reduction is related to the stronger affinity toward gaseous adsorbates after the metallization of pristine MOF-525. Interestingly, spectroscopic studies of single Co, MOF-525, and MOF-525-Co proved the presence of unique Co-N species in the doped MOF. Visible-light irradiation induced high-spin state Co II valence transformation to low-spin state Co I . It was also found, that the coordination between the porphyrin ring and the Co sites most likely leads to efficient closure of the electron transfer channels from the porphyrin units to the Zr oxo-clusters [151].
A high TOF of 450 within 2.5 h upon conversion of CO 2 to CO was observed for Co-ZIF-9 with cobalt clusters as nodes, and benzimidazolate as a linker. The reaction took place in the presence of [Ru(bpy) 3 ] 2+ as photosensitizer under visible light (420 nm). Co-ZIF-9 exhibited catalytic activity in CO 2 reduction immediately after synthesis. However, the micropores blocked by solvent guest molecules make activation in a vacuum necessary to increase channel accessibility. After opening the pores, the material can be applied in CO 2 capture, concentration, and conversion with an efficiency of 83.6 µmol h −1 of CO evolution [152]. The catalytic activity of Co-ZIF-9 was further enhanced by integrating MOF with graphitic carbon nitride (g-C 3 N 4 ). The carbon material acted as a semiconductor photocatalyst, and MOF was a co-catalyst ensuring CO 2 capture/concentration and stimulating light-induced charge separation in CO evolution. The quantum yield of the system under monochromatic light (420 nm) was 0.9%, with TON reaching a value of 35. A significant increase in the efficiency of photocatalytic CO 2 reduction was noticed when various β-hydroxylated amines were added as electron donors. Among them, it was triethanolamine (TEOA) that caused the highest evolution of CO, indicating a strong influence of steric hindrance even in the case of sacrificial electron donors in catalytic processes [153].
The Co-ZIF-9, being simultaneously a catalyst and a co-catalyst, supported CdS in CO 2 reduction and promoted electron transfer. The composite showed a high apparent quantum yield (1.93%). In the proposed reaction mechanism, visible light generated electron-hole pairs on the semiconductor. Then, the electrons migrated to the conduction band of CdS and were transferred to the CO 2 adsorbed by the MOF. Benzimidazole linkers stabilized the CO 2 * intermediates, which during the continuous reduction and mediating support of cobalt species formed CO [154]. Zhong and co-workers [155] described a PSM of Co-MOF with a double-linker framework composition: 4,5-dicarboxylic acid and 4,4bipyridine. The pristine Co-MOF revealed good catalytic activity in CO 2 reduction but with unsatisfactory selectivity. However, its performance was increased by a bimetallic strategy, in which 2/3 of the Co(II) was replaced by Ni(II). Ultimately, the formation of CO catalysed in the presence of the bimetallic MOF, reached up to 1160 µmol g −1 h −1 . The selectivity of the process toward CO was also excellent with 94.6% over H 2 .
A robust and low-cost catalyst was prepared by Lu and co-workers [156] via Co-MOF 2D layers carbonization with subsequent anchoring of single-Co(II) sites. The efficiency of CO 2 -to-CO photocatalytic conversion was 222 times higher (464.1 µmol g −1 h −1 ) for the composite than for the bulky Co-MOF. The reaction was carried out in a CH 3 CN/H 2 O solution in the presence of TEOA as a sacrificial reducing agent. Tests of the photocurrent response revealed intense current generation caused by light irradiation (420 nm). The energy of photons triggered the migration of electrons to the surface of the composite, followed by electron transfer to the active Co(II) sites with CO 2 already adsorbed.
boxylic acid) exhibited CO2-reductive abilities in the presence of BNAH (1-benzyl-1,4-dihydronicotinamide) as the electron donor. Photoinduced electron transition (PET) was investigated, and single electron transfer was established in the trinuclear clusters. One electron was transferred from [Ru(bpy)3] 2+ to Co-MOF, as follows: [Co II Co II Co II ] to [Co I Co II-Co II ] and from [Co I Co II Co II ] to [Co I Co II Co I ]. This dynamic trinuclear system acted as the catalytically active sites responsible for CO2 reduction (Figure 12) [157].  The rhombic dodecahedral ZIF-67 was applied as a co-catalyst to generate CO from CO 2 . The reaction was conducted under visible light and in the presence of a typical ruthenium-based photosensitizer. Surprisingly, CO 2 reduction proceeded even with the small amount of ZIF-67 (0.05 mg), resulting in the generation of 32.7 µmol of CO. The material indicated TON of 112 for CO 2 reduction after 30 min. To emphasize the specific function of cobalt species spatially coordinated to imidazolate motifs to reduce CO 2 , identical reactions were conducted with Zn-ZIF-8, Cu-HKUST-1, Zr-UiO-66-NH 2 , and Fe-MIL-101-NH 2 . Other non-cobalt based MOFs were not photocatalytically active in CO 2 conversion, proving that cobalt sites are irreplaceable in photocatalytic electron mediation [158]. The light-driven CO 2 reduction in ZIF-67 was further investigated to increase its effectiveness by using TiO 2 as a shell. An amorphous TiO 2 (a-TiO 2 ) layer was uniformly deposited on the MOF surface, which successfully prevented the photocorrosion of ZIF-67. Moreover, the ZIF-67@a-TiO 2 composite reduced CO 2 to CO, giving 43.8 µmol of CO after 4 h under light with 67.2% selectivity over H2. The hydrophilic properties of the metal oxide caused the material to absorb H 3 O + , which decreased the competition between CO 2 and H 3 O + adsorption on ZIF-67. The a-TiO 2 layer improved the light-harvesting efficiency by enhancing light scattering, but it also improved the charge transfer between photosensitizer and MOF. In addition, the mesoporous properties of a-TiO 2 facilitated mass diffusion without impairing CO 2 adsorption [159]. A remarkable result of a billion-fold enhancement in the conductivity of ZIF-67 composites with polypyrrole (PPy) was presented by Peng and co-workers [160]. The morphology of ZIF-67 was controlled by modulating the coordination during the stepwise addition of pyrrole monomers. PPy-reinforced ZIF-67 ensembles can be changed from rhombic dodecahedra to cubes. The obtained materials exhibited high chemical stability with retained photocatalytic capabilities for CO 2 reduction. This high enhancement in the conductivity of PPy-ZIF-67 was attributed to the PPy polymer network in the MOF and also on its surface. In the typical photocatalytic system with [Ru(bpy) 3 ] 2+ and TEOA, the composite reduced CO 2 and 59.42 µmol of CO was generated. The increased efficiency compared to pure ZIF-67 is an outcome of the π-π interaction between the polymer and the photosensitizer, which enhances the static electron transfer to the catalyst. A charge transfer model was established, where light-induced electrons in the photosensitizer hop to LUMO at 3.19 eV. Subsequently, electrons are delocalized from π* orbital and transferred by PPy to the ZIF-67 conduction band at 3.76 eV. Since the ZIF-67 conduction band minimum (CBM) is higher than the redox potential of the CO 2 -to-CO conversion (3.91 eV), the electron can easily participate in the photocatalytic reduction of CO 2 ( Figure 13). Moreover, the catalyst was recycled 4 times, whereas ZIF-67 was applied only once. action between the polymer and the photosensitizer, which enhances the static electron transfer to the catalyst. A charge transfer model was established, where light-induced electrons in the photosensitizer hop to LUMO at 3.19 eV. Subsequently, electrons are delocalized from π* orbital and transferred by PPy to the ZIF-67 conduction band at 3.76 eV. Since the ZIF-67 conduction band minimum (CBM) is higher than the redox potential of the CO2-to-CO conversion (3.91 eV), the electron can easily participate in the photocatalytic reduction of CO2 ( Figure 13). Moreover, the catalyst was recycled 4 times, whereas ZIF-67 was applied only once. Photocatalytic reduction of carbon dioxide is an immensely important research topic, in which out of all MOFs, those based on cobalt are taking the lead. The Co active sites are a much more cost-effective alternative to noble metals. Their coupling with the highly porous structure of MOFs provides a promising base material for CO 2 adsorption and reduction (Table 3). Moreover, the extensive modification possibilities of MOFs contribute to highly selective conversion of CO 2 , mainly to CO. The biggest limitation of cobalt-based MOFs is that compounds with only one carbon atom are obtained after reduction of CO 2 . The main challenge, which has not yet been overcome is to obtain more complex C-C compounds such as hydrocarbons.

Photocatalytic Oxidation of Organic Compounds
Recently, huge amounts of dangerous organic contaminants e.g., biphenyls or phenols that are generated in diverse industries enter water reservoirs threatening wildlife and people. Due to the fact that these compounds are non-biodegradable and stable, photocatalytic oxidation processes as an effective method for eliminating resistant pollutants are applied. Besides low energy consumption, mild conditions of the reaction, and broad scope of applications, with this strategy organic contaminants can be decomposed into biodegradable and less toxic molecules or mineralized into carbon dioxide and water. Furthermore, photocatalytic oxidation may be utilized to obtain intermediates that are subsequently used for synthesizing valuable compounds e.g., drugs [161]. Conducting the reactions under light irradiation allows to avoid using high temperatures and consequently unwanted by-products [162]. Cobalt-based MOFs display great photocatalytic performance in oxidation reactions, which results from the activity of cobalt ions, thus they are readily used [39]. The low selectivity is the main limiting factor that has an influence on reaction efficiency. Despite putting great efforts into proving the feasibility, photocatalytic oxidation of organic compounds is often a non-selective process. For this reason, it is crucial to apply photocatalysts, such as Co-MOFs, to obtain products with high selectivity [163].
Hollow structural Co-MOF-74 (h-Co-MOF-74) possessing a thin shell (~50 nm) assembled by ultra-small nanoparticles (8-18 nm) was synthesized and applied in thioanisole oxidation to obtain methyl phenyl sulfoxide (a crucial intermediate for the pharmaceuticals syntheses) [164]. This unique structure carries numerous benefits including high specific surface area, abundant oxygen vacancies, improved ability of light absorption, and easily accessible catalytic active sites. Owing to these properties, the full conversion of thioanisole with 99% selectivity toward methyl phenyl sulfoxide was achieved in ten hours under simulated sunlight irradiation. Almost identical results (99% conversion and 98% selectivity) were obtained after the fifth reuse cycle. In addition, h-Co-MOF-74 has also been used in the photocatalytic oxidation of 4-bromothioanisole, 4-fluorobenzaldehyde, methyl p-tolyl sulphide, alongside 4-chlorothioanisole. For each of them, 100% conversion to proper products and over 97% selectivity were observed.
Cobalt(II) was introduced into the metal-organic framework TMU-22(Zn) through post-synthetic exchange, forming the mixed-metal TMU-22(Zn/Co) subsequently applied in benzyl alcohol oxidation to benzaldehyde [165]. Three hours of visible light irradiation yielded 65% efficiency, while with the TMU-22(Zn) only~25% conversion was reported. Co 2+ ions were profitably substituted in the framework at more available positions toward the substrate, hence the catalytic performance was improved. According to the reaction mechanism, the exchange between Co 2+ and Zn 2+ resulted in the development of a new level in the conduction band. Thereby, the electrons from the valence band may be promoted to this level and, as a consequence, the band gap is narrowed. Cobalt also acts as a trap immobilizing electron, which is then transferred to O 2 generating highly oxidative •O 2 − . Subjected to five oxidation cycles, TMU-22(Zn/Co) showed 54% effectiveness which indicates the possibility of its reuse. Furthermore, the conducted leaching test confirmed the stability of the photocatalyst. Despite the satisfying performance of TMU-22(Zn/Co) in the conversion of benzyl alcohol, the yields obtained after the oxidation of the electrondeficient substrates (e.g., 4-nitobenzyl alcohol) were lower (40%). The reason might be the structure of the derivative with a steric hindrance.
Effective catalyst-magnetic core/shell metal-organic framework Fe 3 O 4 @Ni-Co-BDC NPs has been applied in the selective aerobic oxidation of benzyl alcohol under solar light irradiation [162]. In three hours, 87% conversion to the proper carbonyl product was observed, whereas in the case of Fe 3 O 4 @Ni-BDC NPs or Fe 3 O 4 @Co-BDC NPs the reaction was slower and not as efficient (60%, 45%). The differences can be attributed to the high band gap of Fe 3 O 4 @Ni-BDC NPs and Fe 3 O 4 @Co-BDC NPs, thus more UV light is needed for their activation. In order to check the reusability of the Fe 3 O 4 @Ni-Co-BDC NPs photocatalyst, seven recycling experiments were carried out. The results showed that it can be recycled without a noticeable decrease in activity. This strategy may be expanded to the wide range of substrates such as primary and secondary benzylic, in addition to aliphatic alcohols, achieving great conversion and selectivity toward corresponding aldehydes or ketones. In the oxidation of 4-methylbenzyl alcohol, 4-methoxybenzyl alcohol, and 3-methoxybenzyl alcohol the conversion yields were as follows: 93%, 98%, 90%.
Another magnetic nanocomposite that can be applied in the oxidation of alcohols to aldehydes under visible light irradiation is CoFe 2 O 4 /Ce-UiO-66 [166]. Coupling a MOF with a cobalt ferrite can enhance the photocatalytic performance as well as stability and recyclability. CoFe 2 O 4 possesses superparamagnetic properties, thanks to which Co-ferrite/MOF can be regenerated by adding the external magnetic field. To examine the CoFe 2 O 4 /Ce-UiO-66 catalytic activity, it was used in the oxidation of n-hexanol and compared with CoFe 2 O 4 and Ce-UiO-66 ( Figure 14A). The synthesized composite ex-hibited~80% conversion of alcohol in four hours, which was higher than that obtained with CoFe 2 O 4 and Ce-UiO-66 ( Figure 14B). The relatively low yield is due to the fact that aliphatic alcohols oxidation is more difficult than aromatic ones which are easily transformed to aldehydes. The reuse studies showed that CoFe 2 O 4 /Ce-UiO-66 can be utilized at least five times without significant activity loss. This MOF was also applied in the six-hour oxidation of aromatic alcohols including 3-nitrobenzyl alcohol, 4-nitrobenzyl alcohol, and 4-bromobenzyl alcohol. The corresponding aldehydes (3-nitrobenzaldehyde, 4-nitrobenzaldehyde, 4-bromobenzaldehyde) were obtained with 90%, 90%, and 82% efficiencies, respectively.  Metal−organic framework/carbon nitride nanosheets composite-TMU-49/CNNSs (TMU-49 = [Co(oba)(bpfb)] × (DMF)2; bpfb = N,N'-(1,4-phenylene)-diisonicotinamide) has been obtained and utilized as a visible light-active catalyst for benzyl alcohol oxidation [167]. Through linking a MOF with C3N4, the benefits of their complementary features while restraining the recombination rate of electron-hole were achieved. After three hours, TMU-49/CNNSs exhibited 78% conversion, whereas for the TMU-49 and CNNSs the efficiency was much lower (36%, 16%). Four hours of oxidation yielded an even higher conversion (81%) to benzaldehyde with 75% selectivity. The light source turned out to also affect the reaction. As the conversion of both reactions was alike, the selectivity under UV and visible irradiation were as follows: 52% and 69%. The synthesized composite was subjected to five recycles which showed that TMU-49/CNNSs retained its photocatalytic activity. Moreover, the material was also applied in the oxidation of a few benzyl alcohol derivatives. Efficiencies of 83%, 91%, 76%, and 45% were observed for 4-nitrobenzyl alcohol, 4-bromobenzyl alcohol, 4-methylbenzyl alcohol, and 4-methoxybenzyl alcohol, respectively. According to the proposed mechanism, under visible light electron-hole pairs may be formed by the excited TMU-49 and CNNSs ( Figure 15). Electrons in the TMU-49 conduction band are transferred to the CNNSs valence band to recombine with the holes. Thereby, the subsequent accumulation of electrons in the CNNSs conduction band triggers the O2 reduction to •O2 − . The holes in the TMU-49 valence band can oxidize alcohols in the meantime. As a consequence, TMU-49/CNNSs exhibit excellent photocatalytic performance toward alcohols. Metal-organic framework/carbon nitride nanosheets composite-TMU-49/CNNSs (TMU-49 = [Co(oba)(bpfb)] × (DMF) 2 ; bpfb = N,N'-(1,4-phenylene)-diisonicotinamide) has been obtained and utilized as a visible light-active catalyst for benzyl alcohol oxidation [167]. Through linking a MOF with C 3 N 4 , the benefits of their complementary features while restraining the recombination rate of electron-hole were achieved. After three hours, TMU-49/CNNSs exhibited 78% conversion, whereas for the TMU-49 and CNNSs the efficiency was much lower (36%, 16%). Four hours of oxidation yielded an even higher conversion (81%) to benzaldehyde with 75% selectivity. The light source turned out to also affect the reaction. As the conversion of both reactions was alike, the selectivity under UV and visible irradiation were as follows: 52% and 69%. The synthesized composite was subjected to five recycles which showed that TMU-49/CNNSs retained its photocatalytic activity. Moreover, the material was also applied in the oxidation of a few benzyl alcohol derivatives. Efficiencies of 83%, 91%, 76%, and 45% were observed for 4-nitrobenzyl alcohol, 4-bromobenzyl alcohol, 4-methylbenzyl alcohol, and 4-methoxybenzyl alcohol, respectively. According to the proposed mechanism, under visible light electron-hole pairs may be formed by the excited TMU-49 and CNNSs ( Figure 15). Electrons in the TMU-49 conduction band are transferred to the CNNSs valence band to recombine with the holes. Thereby, the subsequent accumulation of electrons in the CNNSs conduction band triggers the O 2 reduction to •O 2 − . The holes in the TMU-49 valence band can oxidize alcohols in the meantime. As a consequence, TMU-49/CNNSs exhibit excellent photocatalytic performance toward alcohols. In summary, the application of Co-based MOFs as photocatalysts in the oxidation of numerous alcohols and other organic compounds to corresponding products has been described. Under light irradiation, these materials enable high conversion efficiencies, in addition to selectivity, hence they are gaining more and more attention (Table 4). With the use of Co-MOFs, the oxidation processes can be carried out in mild conditions. The products of this reaction may be applied in the synthesis of e.g., drugs and cosmetics. Furthermore, by decomposition of diverse organic pollutants, less harmful and more easily biodegradable compounds are produced, therefore MOFs may be utilized in removing resistant contaminants from water. Considering the availability, high activity, satisfactory stability, and efficiency of cobalt MOFs as well as their reusability without a significant decrease in the catalytic performance, these materials display excellent potential in the oxidation of organic compounds.  In summary, the application of Co-based MOFs as photocatalysts in the oxidation of numerous alcohols and other organic compounds to corresponding products has been described. Under light irradiation, these materials enable high conversion efficiencies, in addition to selectivity, hence they are gaining more and more attention (Table 4). With the use of Co-MOFs, the oxidation processes can be carried out in mild conditions. The products of this reaction may be applied in the synthesis of e.g., drugs and cosmetics. Furthermore, by decomposition of diverse organic pollutants, less harmful and more easily biodegradable compounds are produced, therefore MOFs may be utilized in removing resistant contaminants from water. Considering the availability, high activity, satisfactory stability, and efficiency of cobalt MOFs as well as their reusability without a significant decrease in the catalytic performance, these materials display excellent potential in the oxidation of organic compounds.

Conclusions
This review shows the enormous application potential of cobalt-based MOFs and their composites in photocatalytic processes including dye degradation, water and organic compound oxidation, and CO 2 reduction. These materials are characterized by high porosity, which can expose more cobalt active sites, promote transport of reaction substrates and products, as well as reduce carrier transport distance, thereby inhibiting photogenic electron holes recombination. Both the metallic nodes and linkers of MOFs can be subjected to a wide variety of modifications in order to constitute efficient light absorption centres. Interestingly, a MOFs' porous structure enables the incorporation of photosensitizers and co-catalysts to promote carrier separation and enhance photocatalytic activity. Moreover, their high crystallinity prevents the formation of structural defects resulting from the rapid recombination of electron holes. Cobalt-based MOFs show high catalytic efficiency in light-driven reactions as they can be semiconductors or directly interact with solar energy as light harvesters. Cobalt active sites ensure different electron traps that facilitate electrons and holes separation. In addition, they can cause a longer electron lifetime in the photocatalytic processes.
Cobalt species have different functions in each process described in the review, therefore they were presented separately. Considering the mechanisms of the reactions, various active forms are involved in dye degradation, water oxidation and splitting, carbon dioxide reduction, and organic compounds oxidation. In the photodegradation of colorants, mainly •OH radicals are responsible for their decomposition. Highly oxidative •O 2 − affects the oxidation of organic compounds. In these reactions, conversion yields and selectivity provide information about the effectiveness of the catalyst. The conductivity of cobalt-based MOFs is important for the oxidation-reduction reactions of water splitting. The photocatalytic activity depends on the ability of electron and hole separation, and their recombination. The light absorption capabilities control the photocatalytic activity, therefore linkers that can harvest light in a broad spectrum are desired. A similar relationship is observed for CO 2 reduction processes. Here, in turn, the key role plays the ability of MOFs to adsorb CO 2 on the surface. The structure of MOF and accessibility to active catalytic centres determine the type of generated product and selectivity of the process. The photocatalytic activity of cobalt-based MOFs in the above-mentioned applications does not yet satisfy the high expectations of the industry; they have actual utility in small-scale systems. The optimization of both the costs of linkers and photocatalyst synthesis will significantly contribute to their wider use.
Despite many advantages presented, further research on Co-based MOFs and their composites should primarily focus on improving their stability in water solutions and under ultraviolet light, thanks to which the possibility of their easy regeneration and multiple reuses will increase. In addition, a deeper understanding of the photocatalytic mechanisms of reactions with Co-based MOFs is needed. Currently, several aspects may be proposed for near future studies to fill in the gaps. For instance, the accurate identification of the amount and type of cobalt species needed to perform the most effective treatment of the metal-organic frameworks for their photocatalytic activity is very important. It is also advisable to carefully study the effect of varied linkers as modifiers on already developed MOFs in order to increase their stability and activity. The generation of a wide range of core-shell structures can contribute to reducing the photocorrosion effect. It has been shown that replacing the linker on the surface of MOFs or creating core-shell structures of a certain thickness can significantly alter their photocatalytic properties. Therefore, it is worth pursuing efforts to integrate cobalt-based MOFs also with metal oxides, which can additionally yield more stable systems. Moreover, combining implantation strategies with molecular platforms, in addition to obtaining MOFs in the form of films, require further screening. The combination of theoretical calculations with experimental studies will allow for predicting their activity and selectivity in specific photocatalytic processes, which in turn may contribute to the rational design of new, low-cost, and high-performance photocatalysts.