Special Issue on Catalyst Deactivation and Regeneration

Catalyst deactivation causes major losses in the chemical industry worldwide every year. The deactivation phenomenon does not only drop the catalytic activity, but forces an allocation of time and a regeneration of resources, which, at the same time, involves wasting more feedstock and materials

Alkhlel and de Lasa [1] have studied the effect of catalyst-to-oil ratio on the coke formation (among other effects) during the cracking of 1,3,5-tri-isopropyl benzene under relevant fluid catalytic cracking (FCC) conditions.These authors have shown that the highest values of catalyst-to-oil ratio involve more chances for bimolecular reactions and,  Alkhlel and de Lasa [1] have studied the effect of catalyst-to-oil ratio on the coke formation (among other effects) during the cracking of 1,3,5-tri-isopropyl benzene under relevant fluid catalytic cracking (FCC) conditions.These authors have shown that the highest values of catalyst-to-oil ratio involve more chances for bimolecular reactions and, as a result, enhanced coke formation.This kind of result can lead to further optimization of process parameters and design to control the coke formation.
The instabilities and transient state happenings in catalytic processes, particularly at the beginning of the reaction, are valuable information from the kinetic point of view.In line with this, Cao et al. [2] have used these transient data to accelerate kinetic modeling discovery and fitting.This interesting avenue calls for a reconsideration of the features that make the selection of the catalysts for a given process, such as the one selected: hydrotreating.
Generally, more sophisticated catalyst with enhanced activity and selectivity normally means that it is more "delicate".This rule leads to innovation in the regeneration step too.Soutelo-Maria et al. [3] have investigated solvent wash, hydrogen treatment, and sonication to regenerate Raney ® -Nickel catalyst for the synthesis of high-valued aminoester monomers.Their results show that hydrogen treatment is the best strategy to recover the full original catalytic activity.
When deactivation is due to coke fouling, the most standardized methodology to regenerate the catalysts is combustion-calcination.However, this strategy is sometimes difficult to control and it is risky for the most sophisticated catalytic materials.In this framework, Astafan et al. [4] have employed a fixed bed dielectric barrier reactor with non-thermal plasma (NTP) waves to regenerate different zeolite frameworks (MFI, MOR, and FAU).These authors discovered that the efficiency of coke oxidation by non-thermal plasma is very sensitive to the coke nature, which is also linked at the same time with the pore topology of the zeolite.Compared to classical calcination with air, non-thermal plasma is a much cleaner technology.Srour et al. [5] followed a relatively similar strategy for spent hydrotreating-hydrodesulfurization catalysts using dielectric barrier discharge (DBD) non-thermal plasma.Their results show that, for this process, certain parameters require further studies as the catalyst is not completely regenerated at the expense of forming other interesting species on the surface of the catalyst.
As an overview, the works presented in this special issue assure a bright future for the field of catalyst deactivation and regeneration, with many open questions and chances for catalyst and process innovations.

Figure 1 .
Figure 1.Number of publications in Catalysts journal in the period 2012-2020, using "deactivation" or "regeneration" search terms, according to Scopus TM .

Figure 1 .
Figure 1.Number of publications in Catalysts journal in the period 2012-2020, using "deactivation" or "regeneration" search terms, according to Scopus™.