remote sensing A New Orbiting Deployable System for Small Satellite Observations for Ecology and Earth Observation

: In this paper, we present several study cases focused on marine, oceanographic, and atmospheric environments, which would greatly beneﬁt from the use of a deployable system for small satellite observations. As opposed to the large standard ones, small satellites have become an effective and affordable alternative access to space, owing to their lower costs, innovative design and technology, and higher revisiting times, when launched in a constellation conﬁguration. One of the biggest challenges is created by the small satellite instrumentation working in the visible (VIS), infrared (IR),

Although a great return is guaranteed, remote sensing performed by standard satellites is very expensive [21], and is thus affordable only to countries and large consortia able to ensure expensive, long-term operations. The high costs are due to large volumes and masses (>1 m 3 , >500 kg) of the standard satellites, which imply the need for powerful launchers. In the late 1980s, the technological advancement of small satellites [22], classified in different classes depending on their masses (cf. Table 1), allowed for space programs to also become accessible to countries, communities, and private institutes with limited funding (e.g., [23]). Furthermore, small satellites represent ideal platforms to test and validate new, cutting-edge technologies. The limited on-board resources indeed require innovative propulsion methods (including electric propulsion and compressed gas or liquids, e.g., butane and carbon dioxide), attitude control, communication, and computation systems. Micro-satellites use innovative compact communication systems (e.g., optical transceivers, antenna arrays, and satellite-to-satellite data relay), in the VHF (very high frequency), UHF (ultra high frequency), and L-, S-, C-, and X-bands. In particular, a remote sensing payload operating in VIS, TIR, and MW onboard small satellites represents a great challenge to balance miniaturization and performance, because the achieved resolution depends on the size of the signal collector. A novel solution is offered by the deployable approach, which allows to both minimize the instrument volume at the launch phase and achieve good performances at the orbital phase (once unfolded). For Earth Observations (EO), deployable optics can become an asset to gain those accurate, precise, and frequent measurements required to keep monitoring natural and human activities [24]. Alongside any technical arrangements, the increasingly widespread data fusion techniques rely on merging data from different sensors to ameliorate the quality of the final output, as regards spatial resolution, geometry, and topography (e.g., [25]). Table 1. Small satellite classification according to their mass adapted from [21,26,27].

Small Satellite Class Mass [kg]
Mini 100 to 500 Micro 10 to 100 Nano 1 to 10 Pico 0.1 to 1 Femto <0.1 In this paper, we reviewed several marine and atmospheric studies, as representative cases (i) to highlight the improvements in accuracy, resolution, and spatial/time coverage when using remote sensing payload onboard small satellites, and (ii) to validate the performances of a deployable telescope, currently under development, targeting ecological questions. In Section 2, we present a short introduction about both small satellites and

Current Status of Small Satellite Payload for Earth Observation
Small satellites for EO often carry optical or microwave sensors, providing observations with a range of spatial, spectral, and temporal resolutions. Here, we will briefly provide an overview of these sensors (values are taken from manufacturer or space agency websites).
In Table 2, we list a number of small satellites (still active or ended), equipped with either remote sensing optical or microwave payloads. These examples have been developed during the last few decades for the EO, with characteristics (e.g., payload characteristics, revisiting time, and costs) that can be fully or partially suitable to image and monitor the study cases presented in this work. In Table S1 in the Supplementary Material, we reported the same parameters, but for medium to large satellites, as comparison.    [43,56] * The years of the missions are given as an interval when it is a past mission. When only one date is given, this refers to the launch date. The eventual numbers in brackets refer to the expected lifetime, as given in the references.

Optical Payloads
The performance of an optical payload, in terms of spatial and signal-to-noise ratio (SNR), is limited by aperture size. Remote optical sensing systems mounted on small satellites usually employ aperture diameters ≤400 mm (cf. Table 2) (e.g., [68]), allowing for a spatial resolution ranging from 1 to 4 m, which is limited by light diffraction and dependent on satellite altitude. New methods have been implemented to limit sensors' volume and mass with similar resolutions to larger satellites, e.g., the high-precision telescope (HPT), a high spatial resolution multispectral sensor sized for small platforms [69], and the deployable optical systems [24].
At the same time, small satellites provide a unique opportunity for launching affordable constellations, which can provide daily return cycles. In this respect, small satellites reach the temporal resolutions that are not practical with large satellites. Constellations such as SkySat (Terra Bella), Flock Imaging Constellation and RapidEye (Planet Labs), ICEYE (ICEYE Ltd. of Espoo), NovaSar, and Disaster Monitoring Constellation Second Generation (SSTL/UKSA) are examples of small satellites working cooperatively to provide a daily coverage of the terrestrial surface (cf. Table 2).

Microwave Payloads
Earth imaging in the microwave range is mainly achieved using the synthetic aperture radar (SAR) technology, which synthesizes the elevation by processing a tailored signal (e.g., [57,70]). This technology allows to increase the spatial resolution using a smaller antenna than in the real aperture radar (RAR) system. Due to its day, night, and (almost) all-weather capabilities, SAR is a key tool for a broad range of EO applications, including the observation of oceans (currents, winds, waves, pollution, etc.), the cryosphere (coverage and extension of ice and snow, navigation routes, etc.), and lands (coverage and extension of vegetation, evolution of geological and tectonic structures, utilization of terrains for agriculture, etc.) [57,[71][72][73].
Passive instruments operating in the microwave range are termed as microwave radiometers (MWRs). They collect microwave radiation naturally emitted by the Earth, guaranteeing continuous, large-scale, all-day, and almost all-weather Earth Observations, which are of paramount importance for environmental monitoring, for instance soil moisture and sea surface salinity [74,75].
MWRs can be built by means of the "aperture synthesis" approach too [76], allowing spatial resolutions that otherwise would require the use of antennas with a larger aperture [77]. Synthetic aperture microwave radiometers (SA-MWRs) are based on the cross-correlation of signals collected by different pairs of antennas, placed at varying antenna-pair spacings [76]. Such baselines represent the visibility function in the frequency domain, which must then be transposed into the brightness temperature map in the spatial domain through an inversion algorithm (e.g., Fourier transform) [78].
MWRs can be designed to allow measurements at a given combination of frequency and polarization (single-channel MWRs), such as the Soil Moisture Active Passive (SMAP) radiometer and the Microwave Imaging Radiometer using Aperture Synthesis (MIRAS), which is part of the European Space Agency (ESA) Soil Moisture and Ocean Salinity (SMOS) mission, or they can call for multi-frequency and multi-polarization capabilities (multichannel MWRs). The latter category includes instruments that can perform measurements at different channels (i.e., using different frequency/polarization combinations), e.g., (i) the Special Sensor Microwave Imager (SSM/I), which covers four frequencies (ranging from 19.35 GHz to 85.5 GHz) and seven channels (i.e., all the frequency channels, with the exception of the 23.235 GHz one, allow for collecting measurements at both vertical and horizontal polarizations); (ii) the Special Sensor Microwave Imager Sounder (SSMIS), which is a 24-channel, microwave radiometer with channel frequencies ranging from 19 GHz to 183 GHz; (iii) the 12-channel Advanced Microwave Scanning Radiometer 2 (AMSR2); and (iv) the 10-channel Microwave Radiation Imager (MWRI) [79]. Although MWRs are mesoscale sensors, a number of products have been also proposed to retrieve parameters on a regional scale [79][80][81].

CubeSats for Earth Observation as an Endpoint Case of Small Satellites
CubeSats are a class of research spacecraft that are classified in the borderline between nano-and pico-satellites. The original CubeSat is a 10-cm cube, less than 1.33 kg in weight [82], but this standard shape, the so-called 1U factor form, can be typically extended to 2U and 3U ones, and up to 27U [83]. CubeSats have recently sprung into the spatial marketplace to address targeted science questions in a rapid and affordable manner (e.g., [57,84]). The advantages given by lower costs, fast development, and the possibility of launching several dozen CubeSats by means of a single rocket, have brought forth the potential for radically new mission architectures. These consist in very large constellations of CubeSats, which allow to combine the temporal resolution of GEO missions with the spatial resolution of LEO missions, thus breaking a traditional trade-off in EO mission design (e.g., [15,85]). Several EO measurements, such as natural-disaster and waterresource monitoring [86], could potentially be compatible with the current state-of-the-art CubeSat technology, even if some of them have never been addressed by any mission of this class [52].

DORA: Deployable Optics for Remote Sensing Applications
The development of small satellites highlighted how EO through remote sensing relies on the compromise between the necessity of high spatial, spectral, and temporal resolutions, payload miniaturization, and the availability of resources from space agencies and companies for the space program. The data acquired in the spectral range from VIS to MW suffer particularly from the smaller size of the telescope or antenna. The limited size and weight resources, mandatory for small satellites, implies a small primary mirror, and/or a lower length of the telescope assembly, reducing its performance in terms of spatial resolution and SNR. Large satellites can indeed host sensors as large as 500-600 mm in diameter, whereas small satellites can accommodate sensors with diameters as large as 300-400 mm (cf. Table 2 and Table S1 in the Supplementary Material). The lower area of the collector represents the troublesome challenge for having data at a high resolution. Remote sensing payloads operating in the MW suffer as well because of the antenna's size and the platform's altitude (the higher the platform altitude, the larger the antenna needs to be to obtain a reasonable spatial resolution).
The new design concept, based on a deployable approach (e.g., [24]), represents a viable architecture to accomplish scientific objectives and applications that are otherwise difficult to reach by small satellites. The deployable technology allows both minimization of the payload volume during the launch and the cruise to the final orbit, and good performances, similar to those of the instruments mounted in larger platforms, during the period of activity. Precision-deployable, stable, optical telescopes, which can fit inside small and low-cost launch vehicles, are prime examples of a technology that will yield breakthrough benefits for future scientific and commercially-oriented applications (e.g., [87]). Similarly, SAR technology synthesizes the flying altitude through a tailored signal processing, allowing to increase the spatial resolution using an antenna much smaller than the physical antenna used in an RAR system [70].
The Italian Ministry of Research funded the "Deployable Optics for Remote sensing Applications" (DORA) project in the framework of the Italian National Research Plan 2015-2020, which will be active until April 2022. DORA is a partnership between private companies (led by SITAEL, the largest Italian private company operating in the space sector), research institutes (INAF-Institute for Space Astrophysics and Planetology (Rome) and INAF-Astronomical Observatory of Padua), and academic centers (University of Naples "Parthenope" and Politecnico of Milan) (e.g., [87]). The objective of the project is to design, realize, and test a prototype of a deployable optical system for remote sensing applications in the VIS to TIR spectral range, and a planned application in the MW spectral range. A deployable telescope and a straylight shield will be interfaced to a focal plane instrument, which can include either a camera or a Fourier spectrometer. The telescope, kept in a closed configuration during the launch to minimize the volume, is then fully deployed by means of actuators in its operative configuration once in flight. A similar deployable system could be eventually modified for extending the antennas used for microwave instrumentations (e.g., [65,88]).
The DORA system has been realized as a prototype for the next generation of space instruments for EO. It has, therefore, been designed to satisfy the requirements of a selection of applications in the ecological and environmental fields, which would best take advantage of deployable instrumentations. These applications will be presented and discussed in the following Section 3, to highlight the efficiency of the deployable systems, and to discuss more generally the efficiency of small space platforms for remote sensing acquisitions. The heterogeneity of the topics and areas examined in these applications, which are used as guidelines to define the instrument requirements, will ensure that the DORA prototype has suitable performances not only for these specific study cases, but also for a broader spectrum of future applications.

Study Cases
In this section, we present an overview of possible applications that would benefit from remote sensing data, in particular in the new perspective provided by small satellites. The applications discussed in this paper cover highly dynamic processes in the environments ranging from mid-latitude to polar seas and atmospheres. See Table 2 and Table S1 in the Supplementary Material for details about the small and large satellites, respectively, mentioned in this section.

Application 1: Composition of the Atmosphere
The Earth's atmosphere composition is primarily N 2 , O 2 , Ar, and H 2 O, plus trace gases (in the order of ppm) (e.g., [89]). Despite their negligible amount, these trace molecules represent a key factor in controlling the radiation budget of the Earth. Compounds such as H 2 O, CO 2 , CH 4 , O 3 , N 2 O, SO 2 , and halocarbons are examples of greenhouse gases, which, trapping the incident solar radiation, determine the degree of heating at the Earth surface, and at the end influence the climate (e.g., [89,90]).
The effects of anthropogenic gases on the atmosphere can be evaluated by monitoring: (i) the ozone loss in the lower stratosphere, (ii) the source of the polluting gases, and (iii) how these gases are transported vertically and horizontally through the atmosphere [89]. For instance, the mapping of SO 2 , which can have either a natural (e.g., from volcanic eruptions, [91]) or anthropogenic (e.g., air traffic and industrial processes, [92]) origin, is important, as it contributes to aerosols formation, which cause variations in the total radiative balance and in the air navigation visibility when injected in large quantities into the atmosphere [93]. At a spatial resolution <1 km, it would be possible to monitor SO 2 in volcanic plumes and from air and maritime navigation, through their emission trails.
Spectrometers, operating from the near UV up to TIR, are used to study the atmospheric composition, e.g., the main IR absorption lines are associated with vibro-rotational transitions of trace gases [94], and concentration, by iterative inverse methods (c.f., [94][95][96]). As reported in [97,98], differential absorption spectroscopy is commonly adopted to detect and quantify the narrow absorption lines in the UV-VIS spectral range characteristics of a specific trace gas. Micro-and nano-satellites have taken a leading role in the atmospheric characterization (e.g., HARP [99], PARASOL [100], and PICASSO [101]), coming up beside and replacing the large satellites (e.g., satellites such as ESA Sentinel-5P [102,103], NASA/Aura [104], or programs such as EUMESAT MetOp [105,106], or fleets such as the NOAA's Joint Polar Satellite System (JPSS) [107,108]). SO 2 can be monitored by micro-and nano-satellites equipped with innovative interferometers, such as the Fabry-Pérot interferometer (FPI) [97,98]. FPI technologies have been developed and applied, from UV to TIR, to micro-spectrometers placed in CubeSat-type hyperspectral imagers [109,110]. An operational version is aboard a CubeSat 2U form factor Nano satellite (a CubeSat multiple of the standard size 1U), which mounts a hyper-spectral infrared camera (0.9-1.4 µm). The FPI interferometer can also be realized by means of the Micro-electromechanical system (MEMS) technologies, which can determine the concentration of multiple gases at a nanometer resolution (e.g., [111][112][113][114][115]). To perform a global SO 2 coverage, e.g., to monitor volcanic emissions, the revisiting time should be at least 24 h. For regional/local acquisitions, e.g., to monitor aerial or naval routes, or industrial and urban plumes, the revisiting time should be few hours, which is feasible only by means of a constellation of satellites. The SNR for the FPI technique can be a factor of six to nine with respect to what can be obtained with the differential optical absorption spectroscopy [97].

Application 2: Polynya Monitoring in Polar Areas
Polynyas are open water or very thin layers of sea ice (with a threshold of ice content varying between 0.5 and 0.7, e.g., [116,117]), which interpose the continuous ice blanket of the polar ice pack. They can be rectangular or oval shaped areas, reaching a size as large as 10 to 10 5 km 2 (e.g., [118]). Polynyas are quasi-permanent and highly dynamic, evolving through occasional openings and closings at the same location for up to several months, and they can reform over many years [119][120][121]. They can be formed by the combined influence of geological features, e.g., seamount, upwelling of warm water into the upper ocean from the thermocline (induced by a large cyclonic ocean eddy and negative wind stress curl), and large-scale anomalous atmospheric warming [122]. Polynyas, due to their nature, play a key role in regulating heat, energy, mass, and momentum exchanges between the ocean and the atmosphere, because they are openings in an otherwise solid ice pack, which performs as a barrier to hinder heat flows and to prevent ocean evaporation [123].
The monitoring of polynya dynamics in the polar regions represents an important science quest. Occurring in polar, mostly inaccessible areas, polynyas can benefit from remote sensing observations. On one side, passive microwave radiometers, such as the Advance Microwave Scanning Radiometer AMSR-E onboard the NASA/Aqua EOS satellite, are one of the most useful instruments to cover large areas without being affected by light conditions and cloud presence, but they suffer from a very coarse resolution (6.5 to 25 km), which prevents disentangling sea ice and open water areas, as well as the thin ice thicknesses [124]. On the other side, satellite thermal infrared imagery (TIR), such as that acquired by the Moderate Resolution Imaging Spectroradiometer (MODIS) instrument on the Aqua EOS satellite, has better resolutions (down to 1 km) and wider swaths than microwave radiometers, but it has the drawback effect of being sensitive to the cloud coverage [125]. SAR and optical sensors represent an alternative for both a better spatial resolution (down to 10-150 m) and for the possibility to be mounted in small platforms. TecSAR and DubaiSat-2 are examples of small satellites equipped with an X-band SAR [126] and an optical system in the VIS to NIR range [127], respectively. In addition, working in the microwaves, SARs are independent from atmospheric perturbations. Because their revisiting times (days to weeks) and swaths are unsuitable for the long-term continuous monitoring of phenomena occurring in polynyas [128], only constellations of satellites are adequate for monitoring polynya dynamics (e.g., Cappella X-SAR [57], Flock imaging constellation [129], and RapidEye [130]).
Alternatively, the simultaneous use of complementary sensors (optical, thermal, and radar) has been thus suggested as the optimal approach for the long-term monitoring of polynyas, and/or the implementation of algorithms to strengthen the final output from the available data [124,131,132]. As, for instance, a multi-band TIR sensor, with at least two bands centered at about 11.0 µm and 12.0 µm, would be feasible to investigate polynyas [124,131].
Temperatures measured at different TIR provide the ice surface temperature (IST), i.e., the sea ice surface temperature, which is fundamental in monitoring the periods of ice blanket opening and closing and its production curve in the polar regions [133,134]. To determine IST value and polynya extent, a minimum revisiting time of 12 h, a swath of about 100 km, a minimum spatial resolution of about 500 m at nadir, and a noise-equivalent temperature difference (NE∆T) of 0.05 K, are required. This observation strategy would overcome the current space and time resolutions of the existing satellite performances that are limiting the monitoring of polynya.
Multispectral measurements, therefore, provide important characteristics of the polar oceans, e.g., the position of the marginal ice zone, presence and dynamics of icebergs, and eddies. Small satellites (eventually in a constellation configuration) represent the most convenient solution to study polynyas and improve the knowledge of their dynamics, allowing for a continuous monitoring of specific polar ocean areas at a very high resolution [135].

Application 3: Coastal Area Monitoring
Coastal zones, i.e., sea areas within~50 km from the mainland, are heavily affected by anthropogenic activities (e.g., [136][137][138]). Their continuous observation is thus crucial to formulate recovery plans, as well as the identification of new tools and methods to optimize both monitoring and management. Remote sensing in the spectral range from VIS to MW represents a key to monitoring the coastal zones [139]: • VIS: 0.46 and 0.54 µm channels provide chlorophyll and other plankton pigment contents; the 0.7 to 0.8 µm region detects the presence of sediments and coastal areas pollution and/or erosion; • IR: the~1 to 5 µm range allows to clearly distinguish water from other surfaces; • TIR: the 8 to 14 µm spectral range detects sea radiation emissions, allowing for the determination of the sea surficial temperature; • MW: this spectral range provides sea roughness, which allows to obtain information on surface wind, and which affects emissivity, a quantity used to derive sea salinity once the sea surface temperature and the observational conditions are known.
Coastal oceanography is traditionally focused on measuring several geophysical variables, e.g., ocean color, surface temperature, salinity, sea surface height, and surface wind field. Coastal oceanography would benefit from synoptic observational strategies targeted at the ocean, both to monitor natural marine dynamics, and to track the evolution of anthropogenic phenomena (e.g., pollutant dispersion), in order to address any potential risk for the environment in a timely manner [140]. Combining different spectrum bands allows to: (i) distinguish the original ocean color, by limiting any atmospheric interference; and (ii) define the altimetry, by improving re-tracking techniques, taking into account coastal waveform characteristics [141][142][143]. In the following, we separately present the main sea variables.

Ocean Color
The ocean color (OC) is determined by the concentration of the phytoplankton, organic materials, and sediments, as well as anthropogenic materials such as sewages and fertilizers, which provide a nutrient base for organisms in the coastal ocean (e.g., [136,[144][145][146][147]). It is therefore a key variable to investigate the primary productivity in the upper layers of the coastal zones, together with the phenomena such as the mesoscale eddies (circular currents on the ocean spanning 10 to 100 km in diameter, which persist from a few days up to months), fronts (boundaries between distinct water masses), upwellings (where deep cold water rises to the surface), and internal waves (e.g., [148][149][150][151][152]).
To study the OC, two types of instruments are needed: (i) multispectral radiometers, sensitive to a narrow, discrete wavelength band, ranging between 0.94 and 2.26 µm, and (ii) imaging spectrometers, sampling across the spectrum with a defined spectral resolution.
Small satellites can also be a powerful option to monitor narrow regions at high spatial resolutions, in various spectral ranges [135], e.g., coastal areas to track anthropogenic and pollutant compounds, on a daily basis and at a ground resolution of a few hundred meters [153,154]. For instance, OC measurements are the main goal of CubeSats, such as SeaHawk-1 (belonging to the SOCON constellation) [155] and ZACUBE-2 [156], with ground resolutions better than about a hundred of meters.

Sea Surface Temperature
The sea surface temperature (SST) is a critical input to study the sea current systems, eddies, jets, and any upwelling in coastal areas, if measured with a sensor accuracy of at least 0.5 K, which is not yet reachable by small satellites (e.g., [157,158]). In addition to being a tool for monitoring sea phenomena and bacteria activities, SST variation in space and time is used for weather forecasting and for maritime services, as well as for studying the sea-atmosphere interactions [158].
SST can be passively measured from the radiometric TIR or MW components of the electromagnetic spectrum. Examples of radiometers operating in the TIR range are MODIS, onboard NASA Aqua and Terra, and AVHRR, onboard the European MetOp and NOAA Polar Orbiting Environmental Satellites (POES), which can provide a global coverage within 1-2 days at a spatial resolution down 1 km [159]. However, TIR acquisitions depend on a clear sky without clouds or volcanic dust. Alternatively, for guaranteeing all-weather continuous acquisitions, SST can be obtained from radiometer data taken at 4 to 12 GHz, because it is proportional to the surface radiance in this frequency range [160]. However, microwave emissions from the sea surface are weak and coarser in resolution (46 km), and the first high-quality data were possible with the Microwave Imager onboard the Tropical Rainfall Measuring Mission (TRMM), a large space mission [160,161].

Sea Surface Salinity
Sea surface salinity (SSS) represents the quantification of salts dissolved in seawater [162]. It is thus a key parameter to measure variations of the fresh water amount within the ocean, as, for instance, a sudden entry of non-salty water through precipitation or melted ice [163] can affect ecosystems. SSS is fundamental for tracking horizontal and vertical water mass movements and/or mixing [163][164][165]. In particular, SSS, together with SST, can be used to derive ocean density, and, therefore, salinity allows to estimate the long-term variations of the water cycle, ocean-atmosphere exchanges, and the density-driven global ocean circulation [163,165].
The first map of SSS on a global scale, at 40-150 km spatial resolution, was made possible via remote sensing by means of the ESA Soil Moisture and Ocean Salinity (SMOS) mission, launched in 2009, the NASA Aquarius mission, launched in 2011, and the NASA Soil Moisture Active-Passive (SMAP) mission, launched in 2015 [164,166]. SSS is derived from the polarized brightness temperature, which is measured by a radiometer at the L-band, once the dielectric constant of sea water is known [167]. By combining the measurements obtained by sensors onboard all these missions, it is possible to enhance by~30% the global salinity map [162].

Altimetry: Sea Surface Wind and Height
Altimetry has been used to retrieve surface topography (including sea level and wave height), ocean currents, and bathymetry (submarine topography) (e.g., [168,169]). Additionally, it is one of the most reliable ways to observe mesoscale eddies, detected through the small displacements of the sea surface elevation, and scalar wind speeds (e.g., [170]). The most common instruments for altimetry are nadir pointing radar altimeters, sampling along the ground track (e.g., [168,171]). The radar signal is assembled in a waveform of 20 Hz frequency (~300 m along track), where the peaked waveforms correspond to a low sea state condition, whereas broad waveforms correspond to high sea state conditions. The sea surface wind (SSW) field is a key parameter affecting oceanic and atmospheric processes. Satellite-derived sea surface wind observations are currently routinely used in a wide variety of oceanic, atmospheric, and climate applications. Within this context, real-aperture microwave active (i.e., scatterometers [172]) and passive (i.e., radiometers [173]) sensors are widely employed to provide sea surface wind observations to the oceanic and atmospheric operational communities. Although not specifically designed to estimate sea surface wind field, the SAR has been shown to result in reliable enough estimates of sea surface wind field on a finer spatial resolution scale and, therefore, has potential for coastal area applications [174,175].
Sea surface height (SSH) represents the difference of the ocean surface from a constant geopotential surface of reference (level of no motion). SSH is, therefore, key to measuring the thermal expansion and contraction occurring through the different seasons, or to providing information on tides and wind, e.g., [176]. The wave height is estimated from the extent of the leading edge, and typically averaged every 7 km along the tracks (the so-called 1-Hz sampling rate) (e.g., [177,178]). Initially designed for observations on the high seas, such as the sea level change, ocean circulation, and ocean tides [179], the satellite radar has recently shown its relevance for observations of the coastal regions too [180,181].
Large satellites, such as TOPEX/Poseidon and Sentinel-6, can provide altimetric measurements of the global ocean, but they have been also cooperating with the small satellite series Jason (Jason-1, 2, and 3), equipped with a dual frequencies (C and Ku-band) radar altimeter [182,183], for monitoring the global ocean surface topography and thus measuring variations in the height above the sea surface [184].
However, altimeter-derived SSH measurements can come with large errors due to the rapid variation of the coastal topographic surfaces, leading to complex waveforms that are not accurately analyzed by classical re-tracking algorithms [185]. Mesoscale processes instead require altimetric measurements with high spatial and temporal resolutions. At the same time, measuring satellite altitude requires the ability to accurately and independently determine a satellite's orbital trajectory, e.g., its exact longitude, latitude, and altitude. In more recent years, the Global Navigation Satellite System reflectometry (GNSS-R) technique was introduced to measure ocean parameters such as SSW and SSH [186]. In this case, altimetry calculation relies on the position and timing information obtained from several simultaneous measurements of the entire GPS constellation, distributed over an area of thousands of km across-track [187,188].

Application 4: Posidonia Oceanica Monitoring
Posidonia oceanica (L.) Delile, an endemic seagrass of the Mediterranean Sea, forms extensive meadows, which are among the most efficient ecosystems on the planet in terms of the number of services per area [189][190][191][192][193][194]. These include the stabilization of the sediment and the mitigation of hydrodynamic stress on the coastline, by protecting it from erosive processes (e.g., [195][196][197][198][199]). At the same time, P. oceanica meadows are essential for preserving coastal biodiversity and natural resources, and are serviceable for nursery grounds and fish habitats [193,200,201]. Additionally, they represent one of the largest carbon supplies in the Mediterranean Sea [201,202] and other shallow coastal areas across the world [203].
P. oceanica meadows can extend from the surface down to 35-40 m deep, depending mostly upon water transparency, and they colonize multiple substrates (e.g., [195,196,204]). The variation of the geomorphological, chemical, and physical characteristics that follow one another along the environmental gradients (e.g., bathymetric variations) determine very heterogeneous grasslands in terms of density, biomass, and associated fauna (e.g., [204]). In recent decades, P. oceanica underwent a gradual areal regression, by as much as~34% in the Mediterranean basin, and 25% in the Italian seas, when comparing historical and the early 2000s maps (e.g., [205]). This regression was caused by anthropogenic processes including fish farm activities, such as trawling and anchoring, gas pipeline refilling, and polluting agents in the coastal areas [198,[205][206][207][208]. An updated database is thus crucial to study the evolution of the ecosystems formed by the meadows [209], and to safeguard and manage such habitats and biodiversity [189,210].
Remote sensing would be very effective in obtaining a spatial and temporal survey of the meadows, through the generation of a broad and synoptic view of the coastal system, and a complete study of biotic and abiotic variables [200,[211][212][213][214]. Aquatic ecosystems are indeed characterized by strong optical signals deriving from the distinctive photosynthetic pigments of the various plant groups, from phytoplankton to submerged or emerged macroalgae, from marine phanerogams to coastal-terrestrial plants [215]. However, a good optical depth of water is a necessary condition for mapping the meadows on the sea floor, urging the emergency of contrasting coastal pollution and anthropogenic activities [200]. The evolution of the P. oceanica and their erosion can be then modelled from the optical images (once they have been geometrically and radiometrically corrected, e.g., [213]) by means of machine learning techniques (e.g., [216][217][218]). Additionally, biotic properties of meadows (primary production and density) and abiotic factors (turbidity, bathymetry, and the presence of suspended solids) can be identified in the processed images as geomorphological characterization of the coastal area (e.g., [194]).
The predicted complexity and diversity of the P. oceanica environment requires spatial resolutions down a few meters (e.g., [219]). For a detailed P. oceanica mapping, remote sensing images at a spatial resolution of about 1 m at nadir in the panchromatic (0.45-0.8 µm), and 2 m at nadir in the multispectral filter band are demanded for an accurate mapping of the meadows. At the same time, a high spectral resolution is required for a finer ocean color acquisition and the correct identification and mapping of the grassland. The multispectral band should include eight filters: (i) 'Blue' (0.45-0.51 µm) and (ii) 'Green' (0.51-0.58 µm), which are reflected by the water column and leaves of P. oceanica, with peak reflectivity of the leaves at 0.53 µm; (iii) 'Red' (0.63-0.69 µm), which is strongly absorbed by the water column; (iv) 'Near InfraRed 1' (0.77-0.895 µm), the wavelengths of which have the lowest water absorption, while being strongly reflected by the meadows' leaves; (v) 'Coastal Blue' (0.4-0.45 µm), whose penetrating power into the water and its additional contribution for the atmospheric correction would allow for the identification of coastlines and the analysis of bathymetry; (vi) 'Yellow' (0.585-0.625 µm), which better renders the natural colors of images, and thus allows to optimize the classification processes; (vii) 'Red Edge' (0.705-0.745 µm), which is fundamental for the in-depth analysis of the health of the vegetation covering the wavelength range most affected by the chlorophyll content; and (viii) 'Near InfraRed 2' (0.86-1.04 µm), which is poorly affected by atmospheric conditions, and therefore extremely useful in supporting the analysis of vegetation, as it allows to increase the discriminatory capacity with other habitats.
The latest generation of sensors onboard large (e.g., QuickBird 2 [220,221] and World-View [221,222]) and medium (e.g., Ikonos [223] and Ikonos-2 [211,220]) satellites have spectral and spatial resolution sufficiently high to obtain a very detailed map of the P. oceanica (down to the meter-size resolution, e.g., [201]). However, their time resolution is not sufficient for mapping the spatio-temporal changes of the meadows or to systematically study the coastal and estuarine bio-physical dynamics (e.g., [201]). A short revisiting time (daily to weekly order) does not guarantee the observability of the study area, caused by cloud coverage and/or water turbidity after rainfalls. Therefore, the shorter the revisiting time, the better and more detailed the mapping of P. Oceanica, to detect possible dangerous regressions. The constellation of SmallSats can thus be the best solution to satisfy such multi-temporality characteristics, although current small satellites, such as the RapidEye constellation [201,222,224,225], still might not reach the satisfactory spatial resolutions, and new design should be considered for the next SmallSat generation (e.g., deployable optical systems).

Application 5: Precipitations in the Mediterranean Basin
The Mediterranean basin was defined as a "hot-spot" by [226], being one of the most responsive regions to climate changes. Different global and local scale studies agree on both a rainfall decrease and a growing trend of the minimum and maximum temperatures (e.g., [227][228][229]). Models also foresee long dry periods, interrupted by extreme intense summer precipitations, increasing flooding risks (e.g., [230]). Therefore, ameliorating the quality and quantity of the monitoring network represents an asset in order to reduce the effects, and the damages, of extreme weather events.
Precipitation is one of the key measurements, but it is also extremely hard to access the space and time scales of interest and/or because of the complexity or inaccessibility of the studied area (e.g., [231]). Although ground-based weather radars allow to monitor precipitation variability, they are not uniformly and/or sufficiently densely distributed, and gaps for monitoring cloud dynamics on large vertical extension can be filled only by remote sensing observations (e.g., [232]). The Italian Constellation of small satellites for Mediterranean basin Observation (COSMO-SkyMed), First and Second Generations, are medium-large satellites equipped with SAR instrumentations for EO-focused disaster monitoring, including the one caused by flooding [233,234]. Precipitation measurements in the Mediterranean region are currently limited to just a few missions [235], such as the Global Precipitation Measurement mission (GPM) and TRMM, both being large satellites (e.g., [236][237][238][239]). In the last few years, the advacement in the miniaturization technology for space instruments has made small satellites an alternative to the larger ones [240]. In particular, CubeSats, such as the NASA Earth Science Technology Office RainCube, TEMPEST-D, and TROPICS, have been developed with specific meteorological goals [51,65,241,242]. Such missions provided useful information on storm structure and distribution, but their high-cost infrastructures are not counterbalanced by a satisfactory scientific return in terms of data temporal resolution for a continuous and real-time characterization of the fast-changing vertical structure of convective cells (e.g., [243][244][245][246]). Constellations of small satellites (e.g., NASA CYGNSS) could be a cost-effective solution that can provides meteorologica data with high temporal sampling [247].
Remote sensing payloads suitable to measure the precipitation distribution host a Ka band radar (e.g., [248]). The monitoring of the rainfall in the Mediterranean area can be ensured by a Ka (35.75 GHz) weather radar, with a horizontal resolution of 5 km (or better), a time resolution of 30 min (or better), a vertical resolution of 250 m, and a sensitivity of 20 dBZ. Such requirements are consistent with time and spatial scales of thunderstorm cloud formation (from early to decaying stage) (e.g., [244]). It is necessary to rely on a swath of 500 km and a maximum speed at ground of 5 km/s on a low Earth orbit. Thus, a dense constellation of mini-satellites providing high revisiting times in the entire Mediterranean area could be an effective and less expensive alternative to the current missions.
A typical output of this application consists of reflectivity measurements collected at different altitudes within the tropospheric columns, called the Vertical Profile of Reflectivity (VPR) (e.g., [249]). A quality control chain is needed to remove random and systematic errors, including the correction of the vertical reflectivity profiles (i.e., removal of bright band effects), and the mitigation of attenuation along the path (e.g., [250][251][252]). This quality control procedure is propaedeutic for a proper validation of the measures, performed through reflectivity data collected by traditional ground-based weather radar, and for a real time application inherent to the monitoring of precipitation events.

Application 6: Earth Observation for Vessel Detection
Marine vessels detection is currently a very hot topic because it represents a key asset in different domains, e.g., maritime traffic monitoring, surveillance, and smuggling (e.g., [253]). Those vessels that do not voluntarily report any information about their identity, vessel type, route, etc. can be detected and tracked only under a non-cooperative system. Radars or visual surveillance standard methods are usually adopted for vessel noncooperative detection. A non-cooperative system, which calls for all-day and all-weather capabilities, large area coverage, dense revisiting times, and fine spatial resolution details, is thus a key asset to provide added-value products for the end-users (e.g., policymakers, local authorities, etc.) [254].
Vessels SAR observation is a well-established and mature application, and it is unanimously recognized as one of the most suitable remote sensing tools because it can meet most of the above-mentioned requirements, in addition to operating in all weather and lighting conditions (e.g., [255][256][257][258]). Indeed, most of these systems work in the X-band of SAR payload, with resolutions of the order of the meters, such as for instance the TerraSAR-X satellite, and its twin TANDEM-X [259,260]. Very high resolution (VHR) instruments are able to provide extremely detailed images of the observed scenes (e.g., [261]). The limitations of SAR satellites, such as the long revisiting time, are overcome by using a constellation of micro and nano satellites, which are able to provide VHR images with revisiting times of the order of 2 to 3 h, and at lower costs (e.g., [84,262]), such as Capella X-SAR and ICEYE constellations [57].
In SAR images, the vessel signature appears as a spot brighter than the background due to the vessel scattering, i.e., direct reflection from areas perpendicular to the radar beam, corner reflections, and multiple reflections from the vessel and sea surface [255]. In addition, when imaged by fine spatial-resolution SARs and under specific weather-marine conditions, waves associated with moving vessels can be also observed in the data.
However, radar images suffer from large intrinsic noise (speckle), in addition to the azimuth displacements ("train-off-the-track effect"), which are caused by the Doppler effect, and the azimuth ambiguity patterns ("ghost"), which are weaker, repetitive artefacts appearing in coastal areas, caused by the presence of brighter objects on the mainland (e.g., [263]). False positive detections can occur in non-homogeneous areas of the images due to changes in ocean backscattering or to oceanographic phenomena, e.g., atmospheric fronts, internal waves, current boundaries, breaking waves, outlying rocks, shoal sea currents, and coastal effects, while high wind and rough sea states can hamper the correct identification of small vessels [255,264].
The comparison of the pre-and post-event images collected by the micro-satellites can provide an efficient method to detect map changes, robust both to speckle phenomena and co-registration problems (e.g., [265]). In order to increase the accuracy of vessel detection, X-band SAR data are processed through four fundamental stages: land masking, pre-processing, pre-screening, and discrimination [255,266]. Such processing allows the presence of a non-negligible coherent component in the backscattered sea surface signal to be highlighted by evaluating the corresponding Rice Factor (RF) image of the area under study [267]. The RF represents the coherent-to-incoherent received power ratio of the backscattered signal, and therefore the pre-processing stage consists in evaluating the RF of the calibrated SAR image. The pre-screening stage is based on a vessel search by applying the "bright anomalies" method on the RF images [255,268]. Because it was proven that the RF image follows a log-normal distribution, a threshold can be straightforwardly set according to a constant false alarm rate (CFAR) approach to remove false positives [266].
A similar approach is also used for change detection (CD) in urban areas, which adopts a convolutional neural network (CNN) algorithm to process the SAR-generated dataset and retrieve changes of urban structures and buildings (e.g., [269]).

Application 7: Sea State from SAR and Instrumentation Located Onboard the Vessel
As shown in the previous chapter Section 3.6, remote sensing observations represent a powerful tool for providing the kinematic properties of vessels. In turn, the ship motion analysis allows for the real-time assessment of the sea state parameters, which can contribute to minimizing the navigation risks by supporting the onboard decision to handle potentially dangerous phenomena in following and quartering seas, such as surf-riding, broaching, and parametric rolling, and to reduce the fuel costs (e.g., [270,271]). Sea state condition monitoring improves the statistics of long-term wave data, providing additional information, especially in open ocean waters, where the weather buoys are very scattered [272]. In addition, it allows to optimize the ship route by balancing variations of the weather conditions and navigational constraints [273]. Additional benefits arise from the assessment of the onboard comfort level, mainly related to the motion sickness incidence (MSI) parameter, which needs to be continuously monitored to increase the seakeeping performances of passenger ships [270,274].
The characteristic parameters of the sea waves can be efficiently determined from SAR imaging systems, because they are operative in all the light and weather conditions and have a wide swath. The radar system needs an X-or C-band, with a resolution better than a few tens of meters. So far, several large (e.g., the pioneer USA SeaSat [275], ESA Sentinel-1 [276], and DLR TerraSAR-X [259]) and medium-large (e.g., Italian COSMO-SkyMed [233,234]) satellites have been employed to accurately estimate the wave parameters, such as height, average length, and direction, using SAR system in various bands, e.g., C-, X-, and L-bands [277,278]. However, despite their lower swath and space resolution, small platforms are taking hold (e.g., UK NovaSAR-1 and Israeli TecSAR [57]), thanks to the opportunity of multiple launches and the use of non-sun-synchronous orbits [57].
The characteristic parameters of the sea waves provided by the SAR system mounted on small platforms can be used as references to verify the performance of a parametric wave spectrum resembling procedure that can be applied to detect the sea state parameters based on the measurement and analysis of the heave and pitch motions of a vessel in a seaway, recorded by positioning sensors located onboard the ship [279,280]. In detail, the heave and pitch motions in a seaway can be estimated starting from the survey of the amplitudes of the ship vertical motions in a point of known coordinates, located on the centerline plane, using the GNSS (Global Navigation Satellite System), and pitch acceleration, using a gyroscope [281,282]. The pitch acceleration allows to determine the pitch motion amplitude of the ship (by double integration in the time domain), and, from the vertical translational motion (composed by heave and pitch motions), it is possible to compute the heave motion amplitude of the center of mass. These data allow to determine the response spectra related to the heave and pitch motions in the encounter wave frequency domain [280,281,283]. The response spectra as a function of the absolute frequency can be evaluated on the basis of two additional input data, namely the vessel speed, which is measured by the GNSS, and the encounter angle between the true course of the ship (determined by GNSS system) and the prevailing direction of the sea, which is derived from images obtained by the SAR systems. Given both the response spectra and the ship complex transfer functions, it is possible to determine the sea spectrum by generating the motions [282]. Finally, from the spectral distribution of the sea in the absolute frequency domain, the characteristic parameters are obtained, namely, significant wave height, wave peak period, and spectrum peak enhancement factor.
The idea is to use the radar imaging systems mounted on the micro-satellites constellation, which are to be integrated with the GNSS and the instrumentation on board, in order to provide an integrated ship monitoring system, which can be considered as a mobile laboratory capable of carrying out in situ measurements for the estimation of ship motions and, subsequently, to derive the characteristics of the incident wave (e.g., [270,279,281,282]).

Data Fusion Techniques Applied to Remote Sensing Data
The heterogeneity of the study cases presented in the previous chapter highlighted the advantage of using remote sensing for investigating various environments and aspects of the Earth surface by means of a number of different sensors, each one gathering different intervals of the electromagnetic solar flux reflected back by the surface, and varying in terms of spatial and spectral resolutions [284,285]. Optical sensors in the VIS to NIR spectral range may better serve for mapping horizontal patterns, and SAR systems allow to characterize the targets in all weather conditions, whereas LiDAR technology provides for accurate vertical profile measurements (e.g., [284]). At the same time, the revisiting capability of the satellites allowed to include the temporal information to a given 2D scene [286]. This additional information provided by space-born sensors enables to monitor the evolution of a certain process or of a natural disaster, and/or the variation over time of a certain area [287]. One explicative example is given by the case of P. Oceanica (chapter §3.4), whose mapping at various times allows to appraise the eventual active degradation processes, and to establish mitigation plans.
The growth in the number and variety of both space platforms and remote sensing sensors has opened the path to new techniques of data analysis, which can provide more reliable, coherent, and comprehensive information about the observed scene [286,288]. The data fusion approach thus relies on coupling observations acquired by different sources, whose joint analysis can favor a better interpretation of a certain process or of the observed scene, because the resulting fused data encompass more detailed information than each single acquisition, merging together all the meaningful information acquired by the different sensors (e.g., [284,[289][290][291][292]). Data fusion techniques enable for the monitoring of fast-evolving environmental processes, e.g., highly dynamic natural processes such as polynyas [132], climate changes [293], desertification processes [294], deforestation [295], coastal erosion [296], and the phases of urban development [297], as well as object recognition and tracking or classification, and change detection [288].
Data fusion has been firstly adopted to blend the high spatial resolution of PAN with the high spectral resolution of MS acquisitions [287]. The accessibility to both the panchromatic and usually four multispectral bands will enable the application of pan-sharpening techniques, and the consequent availability of multispectral data at the same geometric resolution as the panchromatic. Indeed, due to their constructional constraints, MS sensors have a very narrow spectral bandwidth, which in turn requires a larger instantaneous field of view (IFOV), and are thus characterized by a lower spatial resolution than PAN sensors [284,285]. On the contrary, the smaller IFOV of PAN sensors allows to achieve better spatial resolutions, but their broader bandwidths do not allow to reach high spectral resolutions. Such a distinctiveness in the bandwidth properties of PAN and MS images means that a single sensor is unable to simultaneously have both high spatial and spectral resolution [284,292]. Nevertheless, both PAN and MS sensors simultaneously acquire the same ground scene, with the same acquisition mode too, facilitating the synthesis of the PAN high spatial resolution with the MS high spectral resolution properties [284]. This is the so-called pan-sharpening technique, which stands for its key role for producing high-resolution multispectral images (e.g., [284,292,[298][299][300]), opening to the possibility of mapping the territory at the highest resolution and of having color ortho-images comparable to those obtainable from aircrafts, which becomes particularly useful for land cover classification, visual interpretation, and target recognition [284,286].
The strength of the data fusion approach can be appraised when considering different types of instruments. For instance, the fusion of multispectral satellite imagery and LiDAR data allows for an accurate object recognition and classification, when the spectral signature is supported by the altimetric variations provided by the digital elevation model [287,301]. Another useful multi-instrument data combination relies on fusing optical images with SAR data, which, being based on radar backscatter measurements, extend the information on the observed scene acquired in the VIS to NIR spectral bands, especially when the cloud coverage causes gaps in the time series of any continuous monitoring [284,286,287].
On the other hand, another convenient data fusion technique is related to the revisit capability characterizing spaceborne instruments, which can acquire the same ground area with a frequency of up to a daily basis (e.g., small satellites in constellation configuration, cf. Table 2) [286,302]. The spatio-temporal fusion allows to fuse low spatial/high temporal resolution data with high spatial/low temporal resolution data, providing multitemporal high spatial-resolution data. This data fusion, which benefits from the data acquired in the same acquisition mode reducing any co-registration issues, allows for applying change detection techniques to monitor highly dynamic processes, including hazard handling [284,286,287,292]. Similarly, the spectral and/or back-scattering data can also be integrated with the temporal data [286].
The fusion of data acquired at different times from the same sensor or different sensors, such as VIS-NIR optical, SAR, and LiDAR instruments, enables the creation of a comprehensive 4D representation of the observed ground scene [284,286,302]. The initial set of data used for fusion and/or the degree of information to be extracted from the final output determine the data fusion level: (i) raw data level (e.g., pan-sharpening), where the input data from the various sources are integrated into one single, higher spatial resolution data; (ii) feature level (e.g., classification and change detection), where surface features can be extracted and re-arranged; and (iii) decision level (e.g., fusion of data acquired by multiple sensors-optical, SAR, and LiDAR), where the results from multiple algorithms are combined and fused into one single, fused decision [284,287,288]. Such an increase in the degree of data fusion level brings the current trend out, where this approach has become a fundamental tool for data analysis, partly due to the increase in the number of the launched satellites (eventually in constellation configuration), to the improvement of the spatial and spectral resolutions of space sensors, and to the opportunity of validating and integrating the remote sensing data with ground data [284].
In this framework, the DORA project can greatly benefit from the data fusion techniques outlined above. On one hand, the current telescope prototype under development is equipped with an optical sensor operating in the VIS to TIR spectral bands, for which the various study cases requested a~300-400 nm panchromatic filter and several~50 nm multispectral filters. On the other hand, a similar instrument equipped instead with an SAR antenna is under study, as well as the possibility of having a constellation of small platforms flying deployable optics. At the present state of activities, with only the optical sensor under development, we will consider here only the pan-sharpening technique for the data fusion application.
So far, large satellites, such as the WorldView, have optical sensors with very high resolutions (of the order of a meter or less) and multiple spectral bands, which allow for the pan-sharpening technique. However, since its initial conceptualization, data fusion has become an essential tool to process data acquired by small satellites, which can (i) guarantee a great ground coverage by means of constellations, and (ii) ensure a wider utilization of the final data products, because they are cheaper. An example can be provided by the SkySat constellation (in the case of SkySat 16 to 21, the resolutions of the panchromatic and the spectral bands are 0.57 m and 0.75 m, respectively). See Table 2 for more examples.
Here, we present the results of pan-sharpening applied to panchromatic and multispectral images taken by Pléiades HR-1B, a large satellite that acquired images at the spatial resolutions of 0.5 m and 2 m for the panchromatic and multispectral filters, respectively, i.e., similar to those achievable with small satellites. Figure 1, showing the RGB composition of Lesbos Island (Greece), is taken as a sample image, where four pan-sharpening techniques are tested: multiplicative, simple mean, intensity hue saturation (IHS), and Brovey transformation. Figure 2a-d show the same scene of Figure 1 in RGB, each one after the application of one of the pan-sharpening techniques listed above. Because the best performing method cannot be fixed in an absolute way, but depends on the characteristics of the study area, several methods must be compared each time to select the one which provides suitable results for a defined purpose, by means of visual, spatial, and spectral analysis [303,304]. characteristics of the study area, several methods must be compared each time to select the one which provides suitable results for a defined purpose, by means of visual, spatial, and spectral analysis [303,304].

Radiometric Model as Tool for DORA Feasibility Study
In this paper, we have presented a selection of study cases that are not exhaustive of all the possible marine, atmospheric, and oceanographic research topics, but they have been selected for being quite wide-ranging to carry out the feasibility study of the DORA project. In Table 3, we summarize the state-of-the-art of the presented study cases, which will highlight how new space missions, such as the one studied within the DORA project,

Radiometric Model as Tool for DORA Feasibility Study
In this paper, we have presented a selection of study cases that are not exhaustive of all the possible marine, atmospheric, and oceanographic research topics, but they have been selected for being quite wide-ranging to carry out the feasibility study of the DORA project. In Table 3, we summarize the state-of-the-art of the presented study cases, which will highlight how new space missions, such as the one studied within the DORA project, can be of great benefit for their investigation and progress. Indeed, current remote sensing data are only partially available because of the high costs of the large satellite data acquisition and/or the still limited use of small satellites.  The possibility of having a constellation of platforms with a very short revisiting time (2-3 h) VHR images at lower costs Generally, for all the cases considered here, the remote sensing system should include instrumentation operating in the spectral range from VIS to NIR and in MW range, and on a global coverage, in order to accurately investigate and monitor the terrestrial environment. Such a system might be launched on a small satellite (mass ≤ 100 kg), operating on a circular polar orbit, with an altitude of~400 to~800 km (LEO), resulting in an orbital speed of~7.5 km/s, which corresponds to a 6.91 km/s ground speed. The orbit should be also heliosynchronous, with an orbital period of about 100 min, i.e., about 15 orbits in one day, and equatorial passes at~10:00 ÷ 14:00 local time.
We performed a feasibility study only of those applications that demanded a sensor in the VIS to IR spectral range. We carried out a radiometric analysis on the system, which allowed to quantify the radiation flux gathered by the optical system, at varying observing conditions and needed resolutions, and the signal-to-noise ratio (SNR). The SNR is then compared to the specific values given by each application to determine whether or not DORA can reach the requested requirements. In Table 4, the columns 2 to 5 and 7 summarize the requirements, from each of the applications listed in Section 3, to accomplish their specific goals. We also included for completeness the MW-related applications, listing all their requirements, and for a couple of them we assessed their feasibility.
To evaluate the characteristics and performances of the optical instrument, a radiometric model has been developed. The core of such a model represents the response of the instrument, by correctly assessing the spectral response of all its constituting optical elements [305]. On the other hand, the final signal gathered by the detector also depends on the observed sources, which varied from one application to another, and the targets of which have been thus used to compute the output signal and related SNR. Due to the lack of a physical model of the instrument we are considering, in order to produce reliable and meaningful results, the spectral properties of the instrument were assumed based on previous similar projects or instruments in operation [305,306].   a The "model" SNR was derived considering the minimum ground resolution requested by the specific application. b An exploratory study has been carried out to evaluate the optimal ground resolution to satisfy the condition of having a "Model" SNR higher than the requested value. c Most of the operational satellite SARs are designed with a specific "wave mode (WM)" that, for instance, in the case of the Copernicus Sentinel-1 mission, collects 20 km by 20 km images at 5 m by 5 m spatial resolution every 100 km along the orbit. * A wider range is considered necessary to be further tested. ** Spatial resolution effectively requested by the specific application.
The radiometric model is developed from the solar radiation flux at the terrestrial upper atmosphere, which was shaped as the Plank function, assuming the sun as a black body at a temperature of 5800 K (BB model), and decreased in intensity to consider the radiation travel to the Earth's orbit. The characteristics of the telescope and platform were assumed on the basis of the most recent optical design. The deployable telescope is assumed with an aperture of 300 m, with an obstruction of 60 mm due to the presence of a secondary mirror. This is coupled with panchromatic and multispectral filters, ranging from about 0.3 to 2.5 µm, with a bandwidth from about 0.05 to 0.2 µm, depending on the considered application. In order to derive the final flux, we considered the optical efficiency (varying between 0.65 and 0.85 in the 350 to 1100 nm wavelength range, and 0.001 otherwise) and the detector quantum efficiency (set to 0.6). The reflected solar flux was obtained by assuming the albedo (which was different for each application, cf. Table 4), whereas no corrective factor was included to account for the terrestrial atmosphere effects, assuming to avoid the stronger absorption bands. The total radiation was derived using the maximum integration time, set to 70% of the dwell time. The SNR was estimated assuming as the main error source the shot noise, and was therefore computed as a square root of the signal.
In Table 4, column 8, the results of the radiometric analysis are provided. We draw attention to the fact that these SNR values are functions of the maximum integration time, which is in turn computed from the ground resolutions (depending on the requirements requested by each applications), and the ground track speed (depending on the spacecraft speed and the altitude). We found that the DORA system is capable of resolving the majority of the targets and features described by the various applications. One of the most problematic observations is given by the P. oceanica. We therefore performed a parametric study to evaluate the downgrading of the ground resolution (Table 4, column 9) to have an SNR sufficient for observations. In this case, we obtained that P. oceanica colonies can be observed and monitored by the DORA system with a ground resolution three times larger than requested.

Conclusions
In this paper, we reviewed several environmental applications in marine, atmospheric, and oceanographic thematics, and selected both for having pivotal advancements by using remote sensing data and for being quite comprehensive to evaluate the capabilities of deployable optical systems. In particular, we focused on the Deployable Optics for Remote sensing Applications (DORA) project, which is currently under development, and tested its optical performances through radiometric analysis.
The analyzed study cases show how past and current small satellites can be of great benefit to improve such topics, in terms of data resolutions, revisiting times, and lower acquisition costs. On the other hand, manufacturing constraints imposed by small satellites, i.e., size and weight limitations, might severely limit data quality (high spatial and spectral resolutions) with respect to the requirements needed for a specific application. We showed that the DORA deployable telescope is a valuable solution for EO, in particular for monitoring ecological issues, so as to be able to implement arrangements in a timely manner to protect our natural environment.
The successful development of deployable remote-sensing payloads onboard small satellites might also represent a pathway for the exploration of planets and small bodies, whose variety of properties, in terms of size, shape, composition, and internal structure, calls for newer space missions to fill the gaps in the understanding of our solar system.