The Role of Indicator-Based Sustainability Assessment in Policy and the Decision-Making Process : A Review and Outlook

In order to regulate natural processes and control the scale of human activities, sustainability assessment needs to be integrated into urban planning. In this context, indicator-based sustainability assessment tools are fundamental instruments that provide information to support policy and decision-making. Indicators are necessary to monitor the implementation of the policies and provide feedback needed to accomplish the desirable state of sustainable urban development. This paper aims to explore the role of indicator-based sustainability assessment in policy and the decision-making process. Therefore, it reviews the identified sustainable development indicator initiatives and addresses the research gaps in the literature for future improvement of sustainability assessment frameworks. It concludes with a discussion that the major problem in sustainability assessment lies in the gathering of reliable and accessible data.


Introduction
Expanding urbanisation is one of the leading problems of rapid population growth today.According to the United Nations' world urbanisation prospects report, 54% of the world's population resided in urban areas in 2014 and this number is expected to reach 66% by 2050 [1].As a result of this scale and speed of the growth, providing adequate infrastructure and flexibility to support the needs of this growing population has led to the development of new approaches to the concept of 'sustainability'.As one of them, sustainability assessment (SA) is a methodology that aims to: (1) contribute to a better understanding of the sustainability and its contextual interpretation; (2) integrate sustainability issues into decision-making by identifying and assessing sustainability impacts, and; (3) foster sustainable development policies [2].Since it was established, the use of SA tools has spread rapidly with different interpretations and implementations.Over the past decades, various methodologies were developed to perform SA focusing on different scopes (i.e., four pillars of sustainability) and scales (i.e., local, national, and international) [3].
Today, measurement of sustainability problems via indicators has been widely used by the scientific communities, governments and policy-makers.Indicators serve as a powerful tool in evaluating the impacts of environmental issues and making political decisions for achieving sustainability.Indicator selection is often subjective and the choice of an indicator depends on factors such as whether it is cost-effective, easy to understand, scientifically reliable and internationally comparable [4].Measurability is one of the basic criteria that needs to be taken into account in the development of an effective indicator framework.In recent years, numerous organisations have developed sustainable development indicator (SDI) frameworks at a wide range of geographical units.However, most of them raise important challenges caused by poor quality data.Moreover, many studies in the literature point out the potential of this approach as well as emphasise a need for further research to gather reliable and accessible data at different geographical scales [5][6][7][8][9][10][11][12][13][14].
Due to the importance of SA for taking actions in an attempt to make cities more sustainable, this paper focuses on the role of indicator-based sustainability assessment in policy and decision-making to provide insights for researchers and practitioners.Firstly, it provides insights for the 'sustainable city' by outlining its main characteristics.Secondly, it describes indicator-based sustainability assessment followed by a review of current progress for SDI initiatives across the world.These initiatives are from many countries including Australia, the USA, Canada, the UK, Netherlands, Switzerland, Italy, Germany, France, Ireland, South Africa, Japan, China, Malaysia and Hong Kong and from intergovernmental organisations (Table 1, for more detailed information, please refer to Appendix A).An extensive review of the literature on sustainability indicator frameworks conducted based upon an international literature review and analysis of "grey" literature such as documents published by international organizations, governmental agencies and research institutions available on the internet.Published, peer-reviewed literature was searched using Scopus and the Web of Science databases, while Google was used to search the grey literature.The following keywords were used for searching the literature: "sustainable development indicators", "urban sustainability indicators", "sustainable development indicator initiatives", "sustainability indicator frameworks", "sustainable community indicators", "sustainability indices/index" and "sustainability rating tools".Furthermore, this paper describes the integration of SDIs into policy and the decision-making process.Finally, it concludes with a summary of findings.The Living Building/Community Challenge By International Living Future Institute U.S.

Characteristics of a Sustainable City
A 'sustainable city' can be defined by integrating four pillars: social development, economic development, environmental management and urban governance [15].Social development refers to the improvement of the well-being of citizens by achieving social equity which provides full access to public services such as education, health, transport, housing and recreation [16].Economic development refers to the effective distribution of resources, goods and services to satisfy the needs of all people living in existing and future communities.Environmental management refers to securing the living and physical environment through the sustainable use of resources.Urban governance is an overarching pillar which is required to sustain the integrity of the overall system.Cities that are considered to be sustainable are those which: (1) are socially inclusive in their growth; (2) are environmentally responsible (i.e., have positive or at least minimal adverse impacts on the environment); (3) have a sustainable economy; and; (4) are based on good governance principles (i.e., accountable, responsive, transparent, efficient and effective to the citizens, follow the rules of law, consensus oriented on policies and create opportunities for participation in decision making) [17].The inter-linkages among the four pillars of sustainable development are evident in cities, which function as integrated systems [18].In recent years, a large number of communities have started to adopt sustainable development as a goal as evidenced in both constructed projects and planning principles such as: Adelaide Christie Walk Eco-Village Project, Australia; BedZED (Beddington Zero Energy Development) Eco-Village, UK; Malmo Bo01 Ecological District, Sweden; Kawasaki Eco Town Program, Japan; Freiburg Green City, Germany; City of Copenhagen Sustainable City Initiatives, Denmark; City of Portland Sustainable City Principles, Oregon; Melbourne Principles for Sustainable Cities by the United Nations Environment Program, and; Hannover Principles of Design for Sustainability by William McDonough and Michael Braungart.As seen from the examples given above, many different sets of principles have been developed in order to guide sustainable development of a city.These principles can be summarised under the main headings as follows.

Sustainable Urban Form and Design
Good urban design contributes to sustainability by: (1) using resources more efficiently; (2) creating a sense of place identity; (3) enhancing diversity of housing forms; (4) creating appropriate residential densities; (5) developing a diverse range of public and semi-private spaces, and; (6) providing spaces for a diverse range of green, locally oriented business.In these ways, urban design and land use strategies work together to create a sustainable city [19][20][21][22][23].According to Wheeler [24], sustainability can be achieved through five urban form typologies as shown in Table 2.

Typology Benefits
Compact urban form Limits suburban sprawl by providing more efficient use of land than in conventional suburbia.

Contiguous urban form
Implies that new urban development occurs adjacent to existing urban area.

Connected urban form
Features good street, path and visual connections and is also legible and easy for people to find their way.

Diverse urban form
Contains mixed land use, different typologies and prices/rents.

Ecological urban form
Integrates features of the natural landscape into the form of the city that protects local ecosystems.

Sustainable Transportation
The goals of sustainable transportation can be summarised as shown in Table 3 [25][26][27][28][29].Additionally, sustainable logistics improve the environmental performance of urban freight transport systems for creating more liveable cities [30].As stated by Nathanail et al. [31], some of sustainable logistics include: (1) Restriction/Low emission/Light or low traffic zones; (2) Promotion of green freight transport modes, such as electric vans, bicycles and tricycles for the last mile delivery of goods; (3) Promotion of alternative modes of goods transport such as rail and inland waterways where applicable; (4) Congestion mitigation, incorporating concepts such as the multi-user lanes, and; (5) Use of information systems for enforcement.

Safety
Provide a safe transportation system for users and the general public.
Basic accessibility Provide a transportation system that offers accessibility that allows people to fulfill at least their basic needs.
Equity/equal mobility Provide options that allow affordable and equitable transportation opportunities for all sections of society.
System efficiency Ensure the transportation system's functionality and efficiency are maintained and enhanced.

Security
Ensure the transportation system is secure from, ready for, and resilient to threats from all hazards.
Prosperity Ensure the transportation system's development and operation support economic development and prosperity.

Economic viability
Ensure the economic feasibility of transportation investments over time.

Ecosystems
Protect and enhance environmental and ecological systems while developing and operating transportation systems.

Waste generation
Reduce waste generated by transportation-related activities.

Resource consumption
Reduce the use of non-renewable resources and promote the use of renewable replacements.
Emissions and air quality Reduce transportation-related emissions of air pollutants and greenhouse gases.

Environmental Protection and Restoration
One of the principles of sustainable development is to protect and restore the existing species, habitats and ecosystems by creating ecologically valuable green spaces, designing green buildings and architecture.Green infrastructure is a valuable planning tool for protecting biodiversity, ecosystem functioning and services, promoting societal well-being and supporting green economy, sustainable land and water management.The objectives of green infrastructure are outlined in Table 4 [32][33][34][35][36][37].

Objectives
To enhance, conserve and restore biodiversity by inter alia increasing spatial and functional connectivity between natural and semi-natural areas and improving landscape permeability and mitigating fragmentation.
To maintain, strengthen, and, where adequate, to restore the good functioning of ecosystems in order to ensure the delivery of multiple ecosystem and cultural services.
To acknowledge the economic value of ecosystem services and to increase the value itself, by strengthening their functionality.
To enhance the societal and cultural link with nature and biodiversity, to acknowledge and increase the economic value of ecosystem services and to create incentives for local stakeholders and communities to deliver them.
To minimise urban sprawl and its negative effects on biodiversity, ecosystem services and human living conditions.
To mitigate and adapt to climate change, to increase resilience and reduce the vulnerability to natural disaster risks-floods, water scarcity and droughts, coastal erosion, forest fires, mudslides and avalanches-as well as urban heat islands.
To make best use of the limited land resources.
To contribute to a healthy living, better places to live, providing services to open spaces and recreation opportunities, increasing urban-rural connections, contributing to sustainable transport systems and strengthening the sense of community.

Renewable Energy and Waste Management
A sustainable city should be able to power itself by managing and using land efficiently through renewable resources of energy.Table 5 presents an overview of the renewable technologies and their applications.Additionally, waste management practices such as landfill, incineration, biological treatment, zero waste, recycling-orientated eco-industrial parks, environmental taxes, law and policies are necessary for the achievement of sustainability [38][39][40][41][42][43].Hydropower Low-to-medium electric power needs.Process motive power for small industry.

Geothermal
Grid electricity and large-scale heating.

Social Equity and Environmental Justice
The strategies for creating well-balanced and sustainable communities can be summarised as shown in Table 6 [44][45][46][47].Table 6.Social equity and environmental justice related policy objectives.

Policy Objectives
Transportation Provide equitable and accessible transportation services for all residents, regardless of income, age, or ability.

Housing
Provide a variety of affordable and quality smart growth housing choices for people of all income levels and abilities.

Healthy environment
Ensure that all our residents, regardless of income or ethnicity, share the benefits of a healthy environment.

Economic prosperity
Provide education and workforce training opportunities that are targeted to residents from a variety of backgrounds and education levels, with an emphasis on outreach to low income communities.

Public facilities
Locate energy facilities (such as power plants and/or transmission lines), site waste disposal and management facilities in a manner that protects public health and safety so that lower income and minority communities are not disproportionately negatively affected.

Public involvement
Provide the involvement of a wide range of residents, including lower income and minority residents, seniors, tribal government representatives and persons with disabilities into decision-making process.

Economic Development
Sustainable economy initiatives are defined by Nixon [48] in Table 7.

Cleantech Business Cluster
Encouragement of a cluster of businesses offering green products and services, such as energy, water, and/or resource efficiency; renewable energy; alternative transportation; and pollution/waste prevention and recycling.
Green Business Improvement of the environmental and financial performance of existing firms.

Sustainable Real Estate Development
Promotion of walkable, mixed-use, mixed-income, transit-oriented real estate development.

Green Investment
Initiation of green investment vehicles to invest in green and clean tech businesses and sustainable real estate developments.

Green Jobs
Launch or strengthening of a system for green job development with green skills training training, career pathways, and green entrepreneurship to provide the workforce needed by green and clean tech businesses.

Green and Cleantech Business Attraction and Retention
Promotion of the city/region as an optimal place for green and clean tech businesses to start-up, locate, expand, and grow over the long term.

Green Underserved Communities
Connection of green and clean tech businesses and sustainable real estate developments led by underserved communities with the appropriate business acceleration services and engagement of low-and moderate-income employees and residents in saving money through ecological efficiency.

Sustainability Community Engagement
Engagement of city/regional residents in understanding sustainability, participating in the process of building a sustainable economy, and making green purchasing decisions.

Healthy Urban Planning
The guiding principles for planning healthy cities can be summarised as shown in Table 8 [49][50][51][52].

Assessing Urban Sustainability Using Indicators
The general categorisation of SA framework is arranged on a time continuum based on if they are retrospective (indicators/indices), prospective (integrated assessment) or both (product-related assessment) [53].The first category consists of indicators/indices that are used to monitor the long-term sustainability trends from a retrospective point of view.They provide information in making short-term projections and relevant decisions for the future.The second category consists of integrated assessment tools which investigate policy change or project implementation through developing scenarios.They are divided into three sub-categories: (1) Multi-Criteria Analysis is used in the comparison of policy options, by identifying the effects of these options, their relative performance and the trade-offs to be made; (2) Cost Benefit Analysis is used for evaluating public or private investment proposals by weighing the costs of the project against the expected benefits, and; (3) Impact assessment is a group of forecasting tools used for improving the basis for policy-making and project approval process.The third category consists of product-related assessment tools focusing on the material and energy flows of a product or service from a life cycle perspective.They allow both retrospective and prospective assessments that support decision-making.The most established example is the Life Cycle Assessment, which evaluates resource use, and resulting environmental impacts of a product/service throughout its lifecycle across different scales of the built environment as well as the outputs influence environmental policies and regulations [54][55][56].
Indicator-based SA is increasingly recognized as an important tool which contributes to the planning process.Indicators are statistics or measures that relate to a condition, change of quality, or change in state of something valued.They are selected to provide information about the functioning of a specific system or a specific purpose to support decision-making and management [57].They have a potential to be used as a tool in terms of providing a basis for informing planning action and in determining the sustainability of planning outcomes [58].Selecting relevant indicators is necessary to monitor the implementation of the policies and provide feedbacks needed to accomplish the desirable state of sustainable development.As shown in Table 9, a set of criteria needs to be taken into consideration for the selection of the indicators.Another important criterion is that data needs to be both available, and easily accessible [59][60][61][62][63].

Criterion Reason
Be valid and meaningful It should reflect the phenomenon it is intended to measure and is appropriate to the needs of the user.
Be sensitive and specific to the underlying phenomenon It should respond relatively quickly and noticeably to changes.

Be statistically sound
Indicator measurement needs to be methodologically sound and fit for the purpose, to which it is being applied.

Be intelligible
It should be sufficiently simple to be interpreted in practice.

Allow international comparison
It needs to reflect local policy goals/objectives, but also needs to be consistent with other international indicator programs to allow comparisons across countries.

Be consistent over time
The usefulness of indicators is related directly to the ability to track trends over time.
Be timely Data needs to be collected and reported regularly and frequently, relative to the phenomena being monitored.

Be linked with policy or emerging issues
It should be selected to reflect the important and emerging issues as closely as possible.
Developing an indicator framework is important in terms of suggesting certain ways to think, organise, measure and act.It provides the users focus, purpose, direction, clarity and attention as well as limitations to what indicators can say and do.There are three basic questions involved in building an indicator framework [28]: (1) Why is the information needed?-referring to the intention and application; (2) What information is needed?-referring to the specific issues or impacts measured, and: (3) How is the information to be delivered?-referringto the framework operation.Each framework provides a different set of indicators to answer these questions.Indicators are designed for different purposes to measure progress towards sustainability.They have their own goals, stakeholders and target groups for use and their own characteristics.The main purposes of indicators are summarised as Pastille Consortium [64]: (1) Understanding sustainability-for the identification of relevant issues, analysis of current states and future trends as well as for education and informing the public; (2) Supporting decisions-to provide information for the definition of objectives, goals and the identification of action requirements as well as for benchmarking; (3) Directing-decision-making in terms of monitoring and evaluation, assessing performance and guiding/controlling; (4) Involving stakeholders-for communication, participation, for the initiation of discussions, awareness rising and community empowerment, and; (5) Solving conflicts and building consensus-to clarify a discussion and identify differing and common grounds by establishing a common language.
Sustainable development is a multidimensional concept that requires an amalgamation of indicators that can emphasise the connections between the economy, environment and society.
To develop an effective indicator set, there is a four-step process which is proposed by the Australian Bureau of Rural Sciences [65]: (1) Developing a conceptual framework which clearly defines what is being evaluated and state the question being addressed.The vision for sustainable development needs to be expressed in the form of an overall objective; (2) Subdividing the overall objective into successively more specific objectives until getting down to objectives that can be measured.This step requires consultation involving all stakeholders; (3) Identifying indicators that address the operational objectives, and: (4) Aggregating indicators at lower levels to form a core set for reporting convenience.The information should remain accessible at any level of detail is required.Indicators provide information by aggregating different and multiple data which can be combined so as to communicate complex phenomena in a simple way [66].In this context, international institutions, many countries and groups are elaborating sets of indicators for sustainable development assessment and monitoring.These indicator sets aim to support policy-making by informing various stages including: (1) monitoring and assessment of conditions; (2) strategic ex-ante impact assessment of policies; (3) assessment of performance in the relevant policy area, and (4) policy analysis and evaluation [67].Following section presents a review of indicators of sustainable development.

Review of the Sustainable Development Indicator Initiatives
Instead of having a 'one-problem, one-indicator' approach, SDIs bring the economic, social and environmental aspects of society together by emphasising the links between them [68].As stated by Yigitcanlar et al. [14], with a growing sustainability knowledge base, SDIs are commonly employed in SA models.A large number of indicator-based SA tools are developed to measure sustainability performances of urban localities in order to develop necessary remedies for environmental, social, economic and governance issues.Developing sustainability indicators is a very challenging task.Quantitative measurement of sustainability requires various tiers of information including objectives, assessment criteria, indices, indicators and performance variables/parameters.The objectives define the main goals set by the developers of the tools.Major measurement objectives fall under the headings of four dimensions of sustainable development.Assessment criteria which include indices and indicators, provide principles to establish these objectives to be met.They also provide thresholds, benchmarks or reference levels against which sustainability objectives are measured [69].Various assessment criteria can be identified by determining on the context and scale of the project.Indicator-based SA is conducted at geographical scales varying from building to parcel, street to neighbourhood, city to region, region to national and national to supra-national scales.Each of these tools provides information at a specific geographical scale; building (super-micro), parcel (micro), neighbourhood/suburb (meso), city/region (macro), supra-national (super-macro) [14].
The first SA framework to guide environmental data and indicator development was the STRESS (STress Response Environmental Statistical System) developed by Statistics Canada in the late 1970s.The STRESS framework was based on ecosystem behaviour distinguishing between pressures on the ecosystem, the state of the ecosystem and the ecosystem response.The PSR (Pressure-State-Response) model implemented by the OECD in the 1980s was derived from this example.This framework was further extended by the European Environment Agency (EEA) as DPSIR (Driving force-Pressure-State-Impact-Response), which can be widely adapted from regional to global levels to provide a more comprehensive approach in analysing problems.Since then, an increasing number of methodologies and tools were launched around the world to perform SA focusing on different scopes, scales and objectives.The identified SDI initiatives (including developer name, scale, themes and headline indicators) are presented in Appendix A. As seen in the Appendix A, local initiatives (i.e., building/neighbourhood/community) serve to local authorities and planners in capturing urban environmental stress under themes such as: In parallel with the increasing popularity of SDIs, some drawbacks have been reported in the literature in terms of the selection and development of indicator sets.As stated by Mayer [6], data unavailability for the majority of aggregated indicators area common weakness of all indices; hence, many of the sustainability indicator indices are not capable of measuring all dimensions of sustainability.Some SA indices demonstrate multiple barriers in terms of data availability during the indicator development process, which raises the issue of missing data treatments.For instance, the Environmental Sustainability Index (ESI) covers 163 countries over 192 United Nations recognized countries due to a lack of adequate data to measure some indicators [70].After more than 15 years of work, in the last iteration of 2014 Environmental Performance Index (EPI), global data are still lacking on a number of indicators including: toxic chemical exposures; heavy metals (lead, cadmium and mercury); municipal and toxic waste management; nuclear safety; pesticide safety; wetland loss; species loss; freshwater ecosystems health; water quality (sedimentation, organic and industrial pollutants); recycling; agricultural soil quality and erosion; desertification; comprehensive greenhouse gas emissions, and; climate adaptation.Although the data for many of these indicators exist on the regional, sub-national and local scales, insufficient coverage for every country at a global scale excludes their consideration in the EPI [71].As another example, due to lack of comparable data, countries including Marshall Islands, Monaco, Nauru, Korea, San Marino, Somalia, South Sudan and Tuvalu have been omitted in the calculation of Human Development Index (HDI) [72].For a number of other studies such as the China Urban Sustainability Index, the European Green City Index and the EEA Urban Metabolism Framework, there is little or no consideration of which data is readily available when the indicator set is proposed.The indicators are chosen based on publically available data to make its implementation easier.Two major indices, Ecosystem Well-being Index (EWI) and Human Well-being Index (HWI), are limited by available data as not all indicators (i.e., components including culture, materials and the state of the oceans) are available for all countries [12].
Additionally, several authors have raised a debate on their effectiveness and success in measuring sustainability [73][74][75][76][77][78].According to Hák et al. [79], many indicator initiatives are driven by the availability of relevant and reliable data.The limited quantity and quality of data underlying indicators of sustainability leave them open to criticism.As data collection is expensive, many countries struggle providing data to international organisations which results in producing biased and incomplete indicators sets for measuring sustainability.Scientific research and statistical data collection are well-developed in industrialised countries; hence, their concerns and priorities dominate existing indicators.Pires et al. [80] highlights that some countries have a weak record of participatory approaches in the development of SDIs at the local level and very few governmental initiatives to develop their own local indicator system.Mayer [6] confirms that even they seem different; many of them incorporate the same underlying data because of the small number of available global sustainability datasets.Mori and Christodoulou [81] argues that this relative evaluation and comparison brings along biased assessments, as data only exists for some entities, which also means excluding many nations from evaluation and comparison.Furthermore, there are temporal biases coming from the lack of long term data sets as well as most researches are concentrated on a narrow time frame linked to the present.Developing new data requires 5-10 years and old data sets exclude relevant indicators that monitor newly emergent issues.The impacts of environmental problems have different temporal and spatial characteristics.Many problems that emerged at the local level (e.g., rapid urbanisation, development of industrialisation and modern transportation systems) many years ago have become national and global problems today.For instance, climate change and biodiversity loss are global issues; however their policy responses and strategies are developed at the national level and applied at the local level.In a similar way, it is difficult to analyse the state of environment only at the local level, because the causes of the implemented policies also affect the environment globally.As a result of this multi-scale characteristic of environmental problems, detailed and up-to-date micro-level data is crucial to assess environmental change at larger scales.Dahl [9] reports that there is a need for developing micro-level indicators appropriate to individuals, families or communities which can give positive feedback for their small sustainability efforts and encourage their further actions.Global environmental problems like climate change are in a larger scale that individuals do not see clearly how they contribute to this problem.Even though, they try to make changes in their lifestyle, consumption patterns or resource use, there is little positive feedback to encourage such behaviours.There is a lack of indicators that are capable of evaluating the level of individual actions or commitments.With the development of these indicators, people will easily manage their own behaviour with reference to their individual goals and they will be motivated continue improvements through new policy intervention and incentives.Turcu [11] states that what seems obvious and important to experts at the 'top' of indicator development might seem less important to citizens at its 'bottom'.By including citizens' values and priorities to indicator development, the focus of indicators could shift from 'input' and 'process' to 'outcome' oriented understanding of local sustainability which provides policy-makers with relevant information to assess sustainability.

Integrating Sustainable Development Indicators into Policy and the Decision-Making Process
As pointed out by Dahl [9], a well-designed set of indicators, which are linked to sustainability policies adopted by the local government, updated and reported regularly, can provide clear signals on the success or failure of national policy initiatives and actions.They play an instrumental role in decision-making by supporting the aim of getting more efficient policy outcomes if robust, data-driven and value-free evidence is made available for policy-makers, in a simplified and synthesised format.By clarifying issues and reducing scientific uncertainties, they are applied for monitoring and evaluation of progress at different interrelated levels [82].Michael et al. [83] (p.492) explains this relationship as: "at the local level, the indicators are used mainly in the decision-making processes of urban development by local authorities.Through the involvement of various institutions and service agencies at the regional level, they are used to compare information for the project management and regional development programs.At the international level, the indicators are used to finance regional development projects with international resources and for the development of the cities and communities of the third world".
According to Clark [84], SDIs contribute policy and the decision-making process in five stages: (1) clarifying goals in reference to the problem of concern; (2) describing trends that have had an impact on the problem of concern; (3) identifying particular impacts and their relation to the achievement of goals; (4) analysing conditions and projecting developments, and: (5) evaluating, and selecting alternatives to resolve the problem.From another point of view, Devuyst et al. [85] (p.257) express that SDIs play an important role in the following action areas as presented in Table 10.Furthermore, Hezri [86] defines a taxonomy of indicator uses in policy and the decision-making process as shown in Table 11.

The Role of Sustainability Indicators
Providing a legal, regulatory, and institutional framework.
Making an inventory of the state of environment, development, existing policies and plans.
Adopting flexible and integrative planning approaches that allow the consideration of multiple goals and enable adjustments of changing needs and means.Participating and strengthening the partnership in support of common efforts toward sustainable development.
Reducing the information gap between existing information and availability of data needed to make informed decisions related to environment and development.

Instrumental use
It occurs when there is a direct link or linear relationships between indicators and decision outcomes (use for action).Fluctuations of indicator values provide empirical evidence that will induce corresponding policy and management responses.

Conceptual use
It occurs when indicators sensitise or change a user's understanding of a problem or situation.Over time, conceptual use may subsequently induce decision outcomes.

Tactical use (of information)
It occurs when indicators, or the process of collecting information, are used either as a delaying tactic, as a substitute for action or to deflect criticisms.

Symbolic use
It is the process of gathering indicators to give ritualistic assurances that those who make the decisions hold appropriate attitudes towards decision-making.

Political use
It occurs where the content of indicators becomes ammunition to support a predetermined position of a user.It is about persuading others to a particular view of the problem and ways to solve it for varying reasons of ideology, interest or intellect.
SA is a very complex and broad concept which requires a method to assist planners in gathering, compiling and analysing the extensive data to clarify and support sustainable design and planning strategies.Although many approaches exist, the research on employing assessment methodologies is still in progress.An example of the methodology for indicator-based SA is developed by Walter and Stützel [87].In the first stage, the indicator set is determined by identifying the specific problems that need to be assessed and then justifying indicators that adequately describe these problems.Second stage involves two steps: (1) a standardisation procedure to make different indicators comparable, and; (2) sustainability valuation procedure through combining indicators into an index.Finally, the last stage includes strategy development through analysis of weaknesses and strengths, testing alternative options, setting targets and revision.A more comprehensive methodology is developed by the International Union for Conservation of Nature and Natural Resources, involves seven stages presented in Table 12 [88].
By looking at these practices, it is necessary to regulate the natural processes and control the scale of human activities; therefore, SA needs to be integrated into urban planning.This integration is important in terms of understanding the physical characteristics of urban settlements by recognising their strengths, weaknesses, opportunities and threats in the planning process.In this context, SA tools are fundamental instruments that can provide information to support policy and decision-making for all four pillars of sustainability.As defined by Newton et al. [89] (p.8), "indicators are physical, chemical, biological or socio-economic measures that best represent the key elements of a complex ecosystem or environmental issue".They are used to monitor the long-term sustainability trends from a retrospective point of view.The information they provide helps in making short-term projections and relevant decisions for the future [53].The studies in the literature show that there is a lack of consistent data sources within and between countries and communities.Therefore, the development of SDIs requires further investigation and more micro-level indicators are needed to be developed to work with more detailed data in SA.

No activity
No activity, other than using maps for analysis

Conclusions
Cities are densely populated, highly modified systems resulting from destruction, alteration and fragmentation of natural systems by human activities.These activities lead to serious environmental problems such as climate change, deforestation, loss of biological diversity and natural disasters [90].The effect of human activities on natural resources and their services force us to think about how to face these challenges in a sustainable way.As summarised by Capra [91] (p.99): "To build a sustainable society for our children and future generations, we need to fundamentally redesign many of our technologies and social institutions so as to bridge the wide gap between human design and the ecologically sustainable systems of nature".In this regard, a sustainable framework for urban development is seen as crucial to provide social, economic and ecological resilience of urban systems.SA is increasingly being viewed as an important tool to aid in the shift towards sustainable urban development.SA provides many benefits, including: (1) highlight the economic, social, environmental opportunities and constraints; (2) organize the policy and the decision-making process by reducing the complexity of each stage, and; (3) help governments to reach proposed sustainability targets [92,93].There is a wide variety of SA tools, among them; sustainability indicators serve as a tool that helps policy and decision-makers in improving their actions towards sustainable urban development.
Since the turn of the millennium, the use of SDIs has evolved significantly as a result of need for better knowledge to address environmental issues on various geographical scales and track progress towards sustainable development goals.For example, the Reference Framework for European Sustainable Cities (RFSC) is developed to serve as an indicator 'toolkit' for all European cities and offers practical support in integrating sustainability principles into local policies and actions.The Sustainable Community Indicator Catalog is developed by the Department of Housing and Urban Development (HUD), the Department of Transportation (DOT) and the Environmental Protection Agency (EPA) to help communities in measuring progress toward their sustainability objectives.As a smart city innovation, City Dashboards (e.g., Dublin, London, Amsterdam, Chicago) consist of a number of performance indicators which display data about city services, transportation, education, culture, environmental conditions (e.g., weather, water levels, pollution, noise) and public safety.There are various other examples around the world at different scales which is examined in the Appendix A. As a limitation it has to be mentioned that there are several more which is not included in this review.
This paper aims to provide a state-of-the-art overview of current progress for SDI initiatives across the world.The presented examples measure all aspects of sustainability at all scales, from the largest (international) to the smallest (building).However, measuring sustainability is difficult due to the fact that many of the sustainability problems are interlinked and affect each another.There will always be a debate over which is the most appropriate set of indicators to use and in which framework to apply.Moreover, spatial scale is important in the use of indicators as their function is dependent on the context in which they are used.SA frameworks need to include a range of indicators which provide information to function under the national and regional planning systems while being effective for local authorities and communities.The conclusion drawn from the analysis of the literature is that the major problem in SA lies in the gathering of reliable and accessible data.This implies availability of micro-level data as a key criterion for providing useful information in the comparison.Further research is required to develop more effective approaches and solutions supporting the measurable and accessible data for the indicator development.At the same time, more detailed data is needed which is capable of performing a comparative assessment via indicators at micro-level so as to aggregate these assessment findings to national and international levels.

( 1 )
site selection and design; (2) materials and construction; (3) operations and maintenance, and; (4) innovation.Their list of indicators reflects their priorities in relation to specific urban policies and strategies.National initiatives serve national policy-makers in comparing across a variety of city sizes, geographic conditions and economic structures.Their list of indicators includes more general classification such as: (1) education; (2) resource use; (3) environment, and; (4) transportation.They also monitor urban sustainability in both private and public sectors.International initiatives concern with the problems that are critical to global sustainability.They include worldwide set of indicators such as: (1) climate change; (2) biodiversity; (3) health; (4) society; (5) economy, and; (6) governance.
Monitoring the development process by comparing what has been reviewed to what has been planned.Cooperating internationally by taking into account both universal principles and differentiated needs and concerns of all countries.
LEED (Leadership in Energy and Environmental Design) By the U.S. Green Building Council √ √ √

Table 3 .
The goals of sustainable transportation.

Table 4 .
The objectives of green infrastructure.

Table 5 .
The renewable technologies and their applications.

Table 8 .
Healthy urban development checklist.
Improve location of jobs to housing and commuting options Increase access to a range of quality employment opportunities Increase access to appropriate job training Community Safety Consider crime prevention and sense of security Public Open Space Provide access to green space and natural areas Ensure that public open spaces are safe, healthy, accessible, attractive and easy to maintain Promote quality streetscapes that encourage activity Engender a sense of cultural identity, sense of place and incorporate public art Address the preservation and enhancement of places of natural, historic and cultural significance Social Infrastructure Provide access to a range of facilities to attract and support a diverse population Respond to existing (as well as projected) community needs and current gaps in facilities and/or services Provide for early delivery of social infrastructure Promote an integrated approach to social infrastructure planning Maximise efficiencies in social infrastructure planning and provision Social Cohesion and Connectivity Provide environments that will encourage social interaction and connection amongst people Promote a sense of community and attachment to place Encourage local involvement in planning and community life Minimise social disadvantage and promote equitable access to resources Avoid community severance, division or dislocation Environment and Health Contribute to enhancing air quality Contribute to enhancing water quality, safety and supply Minimise disturbance and health effects associated with noise, odour and light pollution Consider the potential for hazards and address their mitigation

Table 9 .
Selection criteria of key indicators.

Table 10 .
The role of sustainability indicators.

Table 11 .
Taxonomy of indicator use.