Circular Economy and Buildings as Material Banks in Mitigation of Environmental Impacts from Construction and Demolition Waste

: The circular economy is one of the main strategies for mitigating the environmental impacts of civil construction due to the generation of construction and demolition waste (CDW). In this transition, evaluating alternatives for using buildings as material banks is a way to make the process of reusing construction components more efficient. Thus, the article aimed to evaluate the state of the art of publications on the relationship between the circular economy in civil construction and the conceptual model of buildings as material banks to mitigate the environmental impacts of CDW. The authors chose the methodological design of Systematic Literature Review, using the Scopus and Web of Science databases for research, with the following search strings: (“construction” or “civil construction” or “built environment” or “construction industry”) and (“circular economy” or “circular construction”) and (“material banks” or “BAMB” or “buildings as material banks” or “building stocks” or “building materials”) and (“construction waste” or “demolition waste” or “CDW” or “construction and demolition waste” or “environmental impacts”). After a screening in which only articles published in journals were selected, from 2013 to 2023, inclusion and exclusion criteria were applied, to evaluate only those that had a direct relationship with CDW management through circular economy strategies and buildings such as banks of material. As a result, 93 articles remained, which were analyzed using a quantitative and qualitative approach. The predominance of applied studies was also noted through case studies that evaluate the management of materials and waste in the urban environment. The qualitative analysis, carried out using a SWOT matrix, highlighted the strengths of the buildings, such as material banks, the potential reduction of resource extraction and urban mining, and promoting the circulation of construction products. However, the recycling of waste, such as aggregates, still stands out as the main end-of-life strategy adopted, even without occupying the top of the waste hierarchy.


Introduction
Civil construction is responsible for high rates of consumption of natural resources and the generation of waste, which negatively affect the environment and society.Regarding waste generation, according to Kaza et al. (2018) [1], in 2018, the global average of construction and demolition waste (CDW) generation was 604 kg/inhabitant/year, with a projection of this number increasing by up to 60% until 2050.In the Brazilian context, the Annual Panorama of the Brazilian Association of Public Cleaning and Special Waste Companies [2] points out that, in 2021, 227 kg/inhabitant were collected from construction and demolition waste, representing an increase of 2.9% compared to the previous year.
Facing this problem, research that addresses the circular economy (CE) in the construction sector can help to make it more sustainable, in addition to adding value to waste through its reinsertion into the production chain.CE has gained strength as a strategy to Sustainability 2024, 16, 5022 2 of 26 achieve sustainability in many industrial segments because, if population growth rates are maintained at the current level of consumption, the planet will not be able to provide resources for human activities.As a result, there will be a scarcity of resources and greater market volatility in terms of prices and supply capacity.To contain this reality, the circular economy proposes strategies based on new business models and maximizing the life cycle of products through recovery, reuse, or recycling [3].
Despite these potential benefits of CE, Ossio, Salinas, and Hernández (2023) [4] have noticed, through a systematic review, the need to develop research on circular construction in countries in America, Asia, and Africa, in order to adapt their construction models to circular trends.With this, the need for research in this area is assessed, especially in the regions mentioned in the research, which can use this possibility for better environmental indicators but also to improve the quality and efficiency of construction in their urban centers [4].
As for the construction sector, some restraints are observed for the more efficient and circular management of waste generated by its activities.This is because there is a tendency for waste, especially concrete and ceramics, to be recycled through crushing, which reduces added value and incorporates more energy into the system [5].Seeking this valorization of the materials that make up the building, projects that plan Buildings as Material Banks (BAMB) began to be developed [6].
The assessment of buildings as material banks can occur in two different ways, considering new constructions or the existing building stock.As for new buildings, the use of technologies can support the creation and management of a complete model of the building, which allows greater control of components throughout their life cycle [7].On the other hand, for the stock of buildings already constructed, Kleemann et al. (2017) [8] report that the studies that evaluate them are not recent, with research from the 2000s being carried out in Europe, North America, and Asia at the municipal level.However, there are still gaps to be developed on issues such as the accuracy of the available databases regarding the component materials of different construction categories, for example [8].

Research Objective and Contribution of this Article
In view of the above, the research aims to evaluate the state of the art of scientific literature on the relationship of the circular economy in civil construction with the conceptual model of buildings as material banks to mitigate the environmental impacts of construction and demolition waste.To achieve this, a systematic literature review was used as a methodology, which evaluated 93 scientific articles published between 2013 and 2023 with the themes of Circular Economy and Buildings as Material Banks and the following research questions: (1) Which are the themes and methods covered in the literature for implementing buildings as material banks, considering design, construction, and waste management techniques?(2) What are the potential applications of buildings as material banks in mitigating the environmental impacts of construction and demolition waste from a circular economy perspective in construction?
Based on the analyses carried out, the topics covered in the research were identified, as well as the methodologies used to manage buildings such as material banks, in addition to a quantitative classification of articles by year and country of publication.Finally, a SWOT matrix was created to evaluate material banks from the perspective of the circular economy, aiming to mitigate environmental impacts arising from construction and demolition waste.From the analysis of the SWOT matrix, the article can contribute to the advancement of science aiming at the construction of a conceptual model of buildings as a material bank through a strategic approach from the point of view of mitigating the environmental impacts of construction and demolition waste.
The article is structured into six chapters.Following the introduction, a theoretical review on the topics of mitigating the environmental impacts of construction and demolition waste, the circular economy, and buildings as material banks is presented.The third chapter presents the methodological procedures adopted and then the results and discussions.Finally, the conclusions of the article are described in the last chapter.

Theoretical Review 2.1. Mitigation of Environmental Impacts of Construction and Demolition Waste
The environmental impacts of civil construction are perceived worldwide due to the need for resources to supply its entire production chain.Among some data, it can be highlighted that energy used in the operation of buildings and construction accounts for approximately a third of global consumption and is also responsible for a quarter of greenhouse gas emissions worldwide, with the prospect of the built area doubling by 2050 [9].Just for the production of cement, the main construction input, it is estimated that around 8% of annual CO 2 emissions [10].Furthermore, the construction industry accounts for up to 60% of the extraction of raw materials to meet its production needs [11].As for mineral materials, the demand for sand and aggregates is 40 to 50 billion tons annually and could reach 60 million in 2030, according to data from the United Nations [12].
Regarding waste generation, according to Brazil's National Solid Waste Policy (PNRS), established by Law 12,305/2010, civil construction waste is all waste generated in the "constructions, renovations, repairs and demolitions of civil construction works, included those resulting from the preparation and excavation of land for civil works", with companies in the sector being subject to the preparation of a solid waste management plan [13].However, even 13 years after the publication of the aforementioned law, construction and demolition waste do not have adequate management in the country, with the majority being discarded clandestinely and without the possibility of recycling [14].
The CDW generation is concentrated in large urban conglomerates, which occupy small territorial areas due to factors such as the human development index (HDI) or Gross Domestic Product (GDP) of the region, which influence their economic activities [15].For waste that is not sent to landfills or is discarded illegally, the most commonly used option in Brazil is recycling.In 2018, recycling plants operating in Brazil had the capacity to recycle only 45% of the volume of CDW generated in the country.Furthermore, these units have not yet been well distributed across the national territory, being mainly concentrated in the Southeast region [16].
Although recycling is a more sustainable way of disposing of CDW, it is not a priority in the waste hierarchy, which is currently characterized by five stages: prevention, reuse, recycling (high added value, or upcycling), downcycling, and disposal in landfills [17].This is because reuse minimizes the extraction of a new resource, saving new product processing and up to 60% of the energy incorporated in construction elements.On the contrary, recycling causes more energy to be incorporated into the system, which is not desirable [18].
In this sense, another concept presented in the literature is that of urban mining, which consists of the "reactivation of materials accumulated in the urban environment, which were not specifically designed for reuse or recycling (therefore, mining)" [19].The concept already had its first principles in 1969, and today it is characterized by the "recovery of materials from anthropogenic resources", which is one of the main strategies for a circular economy in cities [20].
For these reasons, making the sector more sustainable and mitigating its environmental impacts have been the justification for formulating research and public policies around the world [9].A culture of planning must be established in construction processes, using materials with a low carbon footprint, projects with greater architectural technology, and valuing existing buildings as material banks [10].In this context, the application of circular economy principles in construction has been one of the most discussed strategies to counter the current market model based on consumption [21].

Circular Economy in Construction
The circular economy can be conceptualized as "a regenerative system in which resource input and waste, energy emission and leakage are minimized by slowing, closing and narrowing material and energy circuits" [22].Considering the construction industry, circular construction can be described as "a multidimensional and dynamic economic system for construction, based on the application of circular economy principles" [4].However, what differentiates it from other strategies is its value proposition, which goes beyond environmental issues, generates commercial value, and promotes business competitiveness [3].
Ossio, Salinas, and Hernández (2023) [4], who carried out a systematic review on the circular economy in the built environment based on 316 publications, assess that research in the area revolves around five main clusters: "R" strategies or structures; construction and demolition waste management; design approaches to buildings; business models or networks; and Life Cycle Assessment (LCA).As for the "R" strategies, [23] listed ten possibilities, from R0 to R9, in which the refusal to produce new materials must be prioritized as the first alternative, with energy recovery being the last possible destination for the waste.However, compared to other industries, the process of implementing CE in construction is still slow, both for economic and cultural reasons, which reduces professionals' interest in the topic [24].
For Hentges et al. (2022) [25], in Brazil, there are still no initiatives to encourage the circular economy in the construction sector, even though it is one of the most extractive industries in the country.According to these authors, government incentives are needed for works that adopt CE practices, as well as best practices for component removal, sorting, and waste management.This aligns with the view of experts interviewed by Mhatre et al. (2023) [26], in India, another developing country, who evaluated the use of human labor for service as an aid to the safe removal of components.Another study that evaluated the vision of stakeholders in the institution of a circular economy in construction in Europe assessed that financial burdens and a lack of government incentives are the main barriers to this adoption, and the approach must occur from the top down so that it is efficient and not demanded by individual actors from the bottom up [27].
From a technical point of view, when it comes to planning the end-of-life phase alongside the design phase, the "design for" or "Design for "design for adaptability" or "design for flexibility".These approaches enable the reuse of building components, reducing their disposal in landfills or the need for recycling [28].However, when analyzing these methodologies, it is necessary to address the needs of the community and predict future uses so that it is possible to balance the costs of deconstruction [29].
To support this decision process, LCA is applied to methodologies to estimate and evaluate the impacts of deconstruction on the life cycles of materials [5].As much attention in recent years has been given to the energy expended in operating buildings, LCA is a useful tool for demonstrating the environmental impacts of cradle-to-grave construction components for both new and existing buildings [10].With this, the method evaluates whether the technologies used to reduce impacts throughout the operation reduce the overall impacts of the building, even though data from the construction, maintenance, and end-of-life phases are currently limited [30].Although complex from a technical point of view, it is necessary to analyze the energy incorporated in the stock of existing buildings, aiming for more efficient management, which is a research gap observed [31].
From an economic point of view, the results are still strongly dependent on factors such as type of material, location, availability of markets for recoverable materials, and the economic and political context of the region.Therefore, the rehabilitation of buildings can be an economically viable alternative compared to demolition and reuse [32].Kaewunruen et al. (2024) found that renovating the existing building stock, making it less harmful to the environment, can save resources and reduce waste generation compared to new construction [27].Therefore, feasibility studies must consider the maintenance or refunctionalization of a building before planning a new construction, using tools such as LCA and economic viability analyses for this purpose [10].Bellini et al. (2024) applied a decision process involving criteria that can be applied to define the reuse of construction components based on the analysis of experts in a case study of deconstruction in Belgium, namely: cost, risk, location in the project, logistics and storage, possibility of disassembly, quality and life expectancy, technical requirements, and environmental assessment [33].Another study evaluated two pilot projects for the reuse of precast concrete components in Finland and Sweden from the perspective of circular construction ecosystems.For the authors, the project demonstrated the possibilities of gains for companies that are pioneers in the process of reusing components.Therefore, in addition to the environmental gains from adopting these techniques, financial and commercial gains can be realized from the creation of new business models by companies that are willing to create techniques that make the removal and rehabilitation of construction elements viable for a new project [34].
However, in addition to assessment criteria at the building scale, management processes at the urban scale are necessary.In this sense, it is also necessary to evaluate cities and territories in a circular way, through the spatial availability of resources, materials, and waste flows, based on the vision of key community representatives, to formulate strategies for applying more sustainable practices.This methodology, called geodesign, was applied by Furlan et al. (2024) [35] in three regions of Europe (Amsterdam, Hamburg, and Naples), contributing to better management of urban resources based on CE practices.Based on studies like this, the popularization of reuse practices can help in the culture of understanding the built stock as a potential material bank [34].
Even with these positive examples, some barriers are presented as hindering the application of circular construction concepts, such as: selective demolition methods that imply high operational costs; the need for investment to adopt CE; the lack of regulations that encourage the adoption of CE; and the difficulty in estimating the residual value of building components over various life cycles [36].Given these factors, evaluating buildings globally for functional reuse or as a bank of material resources for new construction is necessary to achieve circular construction.

Buildings as Material Banks
Due to the need for greater efficiency in the use of construction material resources, considering economic and environmental issues, there is growing interest in buildings as material banks [7].However, this perspective changes the way resources should be managed [19], which currently has limited exploration due to the lack of information about the materials available in the existing building stock [37].
Seeking to value the materials that make up the building, the European Union developed the BAMB (Buildings as Material Banks) project, aiming at circularity in the built environment.The initiative envisaged a systemic change in the sector, mainly through Material Passport (MP) tools and reversible building projects [6].Material passports are digital documentation that provides a detailed inventory of all elements available in buildings, including quantity, quality, dimensions, and location in the structure [19].
The material passport is a key element for optimizing the tracking and indication of parts with the greatest potential for reuse.Thus, buildings will not only be valued for their current use but also seen as a source of material resources.Furthermore, buildings have also been seen in a more dynamic way, due to the ease of transforming their layout [38].However, material passports must be combined with georeferencing technologies (such as GIS) and with platforms or digital markets for selling reused products.This is because these tools help locate components and promote the concept of industrial symbiosis, evaluating the flow of materials on an urban scale [39].
Considering a macro-policy structure for circular construction, the initial step is to analyze the construction stock and to think about strategic planning from an economic, social, and environmental point of view.End-of-life buildings and their possibilities for adaptation or deconstruction to reuse materials can be identified [40].This step is essential because if only new buildings are mapped in the databases, we will not have materials for reuse in the short and medium term.Therefore, the digitalization of cities is necessary [41].Furthermore, it is necessary to monitor the flow of materials, documenting and managing these assets, to identify when, in the future, they will be available for reuse [19].
Gepts et al. (2019) [7] evaluated the possibility of using two Belgian databases that store information on new and existing buildings since before 1900 in the country as a way of estimating the available stock of materials as a (future) bank of recycled or reused construction materials.The databases contained data on the geometry and composition of construction materials, coming from public and private initiatives.
Kleemann et al. (2017) [8] carried out a survey of the stock of materials present in buildings constructed in the city of Vienna in 2013.To do this, they combined GIS data from municipal authorities with other data sources and specific case studies to evaluate the composition of materials.Thus, they obtained a spatial mapping of the stock of materials available in the city, which, together with information on building demolition, can provide an estimate of secondary raw materials available at the site.
Hu et al. (2010) [42] carried out research about urban and rural housing inventories, using the useful area per capita and the lifespan of the dwelling as input data to predict construction and demolition rate indicators.For the authors, the relationship between the use of buildings in urban and rural areas can be useful to predict a source of secondary materials or provide a new destination for an existing building.
Another study was carried out in a London neighborhood, estimating the amount of wood stock present in buildings already built there.The authors focused on two specific types of residential housing (semi-detached houses and apartments), using local databases to collect data that contained information on the age, materials, and maintenance carried out in the buildings.A result of 0.98 t of wood per house was obtained, with elements such as flooring, doors, windows, and roof structure being the main contributors.For the authors, these studies are dependent on the quality and availability of data on the building stock of a given region, with some of the data in their study being assumed to be from the historical period in which the building was built [37].
In Brazil, data on the housing stock is practically nonexistent, and only refers to legalized construction.Among the isolated studies, the most recent evaluated the formal real estate stock of the city of São Paulo through the analysis of the city's property registries from 2000 to 2020, with the data being georeferenced and categorized by their use, type, and pattern. of construction.The data presented a stock of 534.8 million m 2 built in 2020, with a large growth in vertical, medium, and high-end residential properties built from the demolition of low-standard residences [43].
The application of these techniques is necessary to make the use of buildings' material stocks economically viable, since knowing their location can shorten transport distances while at the same time making it possible to assess whether the waste generated can meet the demand for new construction [12].However, research reports difficulties in replicability to other regions, in the accuracy of data on building materials, and in the predictability of the flow of materials (dependent on the source of data input), presenting considerable levels of uncertainty [44].
In the case of new buildings that use BIM to prepare the project, the quantity of materials available in the building is already automatically extracted, and it is only necessary to consider any interventions carried out throughout the construction life cycle [7].Thus, since the project's conception, connections have been studied that enable the direct reuse of components, in addition to managing assets throughout their life cycle without them losing their market value.The project must prioritize the durability and adaptability of structural elements, while fences, finishes, and facades must adopt the principles of disassembly so that they can be replaced if necessary.Therefore, the first alternative to be worked on is the reuse of the building [10].
For efficient management of these banks, Marin, Alaerts, and Van Acker (2020) [45] highlight that the spatial dimension, from the location of the origin to the final disposal of waste, must be evaluated, as must the logistics and transportation of these materials and communication between stakeholders.Furthermore, the financial aspects, economic self-sufficiency of recovery activities, and legal aspects must be considered regarding the parameters that must be followed when using the materials.Rose and Stegemann (2018) [46] conclude that flows or mechanisms must be developed that make it possible to project the supply and demand of reusable components to enable their reinsertion in construction.
Furthermore, it appears that research on buildings as material banks is still focusing on a regional level and is geographically located on the European and Asian continents [8].From this perspective, it is possible to state that it is necessary to carry out more studies that relate the methodologies used to create a conceptual model of material banks that can be applied in other regions, as aimed at in this research.

Materials and Methods
The methodology used in this article was a systematic literature review (SLR).For the procedures adopted in the research, the PRISMA checklist (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) [47] was used as a reference, as well as [48], with the steps divided into: scope definition; search for evidence; selection of studies; and analysis structure.RSL was adopted because it provides an auditable and reliable search method, based on already published evidence, to achieve the proposed objectives and answer the research questions [4].
The first stage consisted of defining the research questions, which were listed as: (1) What themes and methods are covered in the literature for implementing buildings as material banks, considering design, construction, and waste management techniques?What are the potential applications of buildings as material banks in mitigating the environmental impacts of construction and demolition waste, based on a circular economy in construction?
After defining the research questions and objectives, the keywords and databases in which the search would be carried out were defined.The following terms were used as keywords: ("construction" or "civil construction" or "built environment" or "construction industry"), ("circular economy" or "circular construction"), ("material banks" or " BAMB" or "buildings as material banks" or "building stocks" or "building materials"), and ("construction waste" or "demolition waste" or "CDW" or "construction and demolition waste" or "environmental impacts").
The keywords were written in English to incorporate a greater number of publications, and they were divided in such a way that articles that related to the three main themes of the research could be reached.The Scopus and Web of Science databases were selected as data sources, given their relevance for publications in the area of engineering and the global scope of studies.The databases returned a total of 202 and 110 results, respectively.After the initial search, filters were carried out by year of publication, restricted to works published between 2013 and November 2023.At this stage, only one publication was excluded from the Scopus database.
To guarantee the quality criteria of the studies, considering peer review, only journal articles were selected as the type of publication, with works published in annals, books, and chapters being excluded.After this filter, 256 publications were pre-selected: 150 from the Scopus database and 106 from the Web of Science.Finally, after excluding duplicate titles, 205 articles remained that were screened considering the eligibility criteria.
The fourth stage consisted of the selection of articles, by reading the titles and abstracts, considering the inclusion (IC) and exclusion (EC) criteria described in Table 1.
After this initial reading, 93 articles were selected.Figure 1 shows the methodological procedures adopted in the research.
Based on the selected studies, as seen in Figure 1, the data were arranged considering quantitative and qualitative analyses.From a quantitative point of view, publications were stratified according to the year of publication and country in which the research was carried out (or the main author, if the location could not be identified).Studies on energy efficiency and water consumption in buildings and cities CE4 Performance assessments of specific waste and materials After this initial reading, 93 articles were selected.Figure 1 shows the methodological procedures adopted in the research.Based on the selected studies, as seen in Figure 1, the data were arranged considering quantitative and qualitative analyses.From a quantitative point of view, publications were stratified according to the year of publication and country in which the research was carried out (or the main author, if the location could not be identified).
For the qualitative analysis, the answer to the first research question was given by analyzing the theme and methodology applied in the studies, dividing them according to their nature, whether basic or applied, and the methods applied.For the second question, the main research results and gaps observed for future studies were compiled.Based on this, a SWOT matrix was created (strengths (S), weaknesses (W), opportunities (O), and threats (T)), used as a management tool and strategic planning for projects and processes, to evaluate the scenarios and propose action plans.According to [49], this tool has been used in many places around the world to promote ways of implementing an adequate waste management process or demonstrate the relevance of this matter for reducing environmental impacts.
According to Cristiano et al. (2021) [50], strengths are internal factors that characterize a good competitive position, while weaknesses are internal agents that can be improved or strengthened.Opportunities and threats are external factors that can benefit or hinder the process in question.Thus, internal factors can be changed, while external factors can only be monitored to prevent threats or enhance opportunities.Given this, the assessment was carried out from the perspective of the circular economy, aiming to mitigate environmental impacts arising from construction and demolition waste.Evidence from each of the studies was collected and classified by relevance according to its recurrence.For the qualitative analysis, the answer to the first research question was given by analyzing the theme and methodology applied in the studies, dividing them according to their nature, whether basic or applied, and the methods applied.For the second question, the main research results and gaps observed for future studies were compiled.Based on this, a SWOT matrix was created (strengths (S), weaknesses (W), opportunities (O), and threats (T)), used as a management tool and strategic planning for projects and processes, to evaluate the scenarios and propose action plans.According to [49], this tool has been used in many places around the world to promote ways of implementing an adequate waste management process or demonstrate the relevance of this matter for reducing environmental impacts.
According to Cristiano et al. (2021) [50], strengths are internal factors that characterize a good competitive position, while weaknesses are internal agents that can be improved or strengthened.Opportunities and threats are external factors that can benefit or hinder the process in question.Thus, internal factors can be changed, while external factors can only be monitored to prevent threats or enhance opportunities.Given this, the assessment was carried out from the perspective of the circular economy, aiming to mitigate environmental impacts arising from construction and demolition waste.Evidence from each of the studies was collected and classified by relevance according to its recurrence.

Quantitative Analysis of Articles
The quantitative analysis began by stratifying the articles based on the year of publication, with the results presented in Figure 2.

Quantitative Analysis of Articles
The quantitative analysis began by stratifying the articles based on the year of publication, with the results presented in Figure 2.Even though the studies were selected from 2013 to 2023, after screening, only articles from 2017 onwards remained.The results demonstrate a marked growth in research throughout 2019 and 2021, with a slight decrease since then.This may be related to the BAMB project, developed by European Union countries between 2015 and 2019, which promoted various research on the topic [6].However, the relevant number of studies published in recent years demonstrates the current relevance of the topic.Next, the countries of origin of the research were evaluated.Figure 3 presents the results.Even though the studies were selected from 2013 to 2023, after screening, only articles from 2017 onwards remained.The results demonstrate a marked growth in research throughout 2019 and 2021, with a slight decrease since then.This may be related to the BAMB project, developed by European Union countries between 2015 and 2019, which promoted various research on the topic [6].However, the relevant number of studies published in recent years demonstrates the current relevance of the topic.Next, the countries of origin of the research were evaluated.Figure 3 presents the results.
It was observed that the majority of studies are concentrated in Europe, 55 in total, followed by Asia, America, Oceania, and Africa, with only 2. One of the studies was published in Turkey, and for this reason it was classified as Europe and Asia.The country with the most publications on the topic is Italy (9 articles), with a considerable number of articles from countries such as China and the United Kingdom, with 8 and 6, respectively.
In the case of China, Aslam, Huang, and Cui (2020) [51] assess that its rapid urbanization led the government to encourage waste management policies in order to maximize reuse and recycling processes and also obtain financial benefits from these processes.As a result, research in the country also developed, presenting a greater number of studies and citations compared to other countries with a strong economy, such as the United States, for example, an aspect also observed in this research.Brazil also stands out in the number of publications, despite not having well-defined policies yet to encourage the circular economy and studies of buildings as material banks, as observed in Europe.Furthermore, despite the concentration of research in developed countries in Europe and Asia, the origin in 37 different countries located on all continents demonstrates that the topic is already widely studied throughout the world, given the environmental problems observed at the global level.

Qualitative Analysis
Subsequently, the studies were classified according to the topic.After reading the works, they were classified into 10 different themes, identified as the main areas of research relating to the circular economy and buildings as material banks: Analysis of the sustainability of projects and materials; Understanding circular construction; design for "x"; pre-deconstructive audit tools/methodologies; management of construction and demolition waste; urban mining; business models for the circular economy; quantification of material stock; systematization of material databases; and use of technologies to support circular construction.Figure 4 shows the distribution of themes over the years.
zation led the government to encourage waste management policies in order to maximize reuse and recycling processes and also obtain financial benefits from these processes.As a result, research in the country also developed, presenting a greater number of studies and citations compared to other countries with a strong economy, such as the United States, for example, an aspect also observed in this research.Brazil also stands out in the number of publications, despite not having well-defined policies yet to encourage the circular economy and studies of buildings as material banks, as observed in Europe.
Furthermore, despite the concentration of research in developed countries in Europe and Asia, the origin in 37 different countries located on all continents demonstrates that the topic is already widely studied throughout the world, given the environmental problems observed at the global level.

Qualitative Analysis
Subsequently, the studies were classified according to the topic.After reading the works, they were classified into 10 different themes, identified as the main areas of research relating to the circular economy and buildings as material banks: Analysis of the sustainability of projects and materials; Understanding circular construction; design for "x"; pre-deconstructive audit tools/methodologies; management of construction and demolition waste; urban mining; business models for the circular economy; quantification of material stock; systematization of material databases; and use of technologies to support circular construction.Figure 4 shows the distribution of themes over the years.It is observed that the first studies had as their theme the management of construction and demolition waste and the quantification of the stock of materials.However, over time, other areas of research emerged, such as the use of technologies to support circular It is observed that the first studies had as their theme the management of construction and demolition waste and the quantification of the stock of materials.However, over time, other areas of research emerged, such as the use of technologies to support circular construction, analysis of the sustainability of projects and materials, and urban mining.Current and future trends include design for "x", systematization of material databases, and studies on business models for the circular economy.
In the research by Osobajo et al. (2022) [52], who carried out a systematic review of research on circular economy in the construction sector, the most discussed topics were the reuse of resources, waste management, and circular economy models.Regarding the management of construction and demolition waste, research was not only focused on the end of the production chain but also aimed at source reduction and closed cycles for the product, just like the principles of the circular economy.However, it was observed in this research that many articles evaluate the use of recycled aggregates as the main method of alternative waste disposal in relation to landfills, with these aggregates being applied as road substrates or reincorporated into concrete [53,54].
To evaluate the second qualitative question, the methodology applied in the work was analyzed, and the results obtained are presented in Figure 5.
product, just like the principles of the circular economy.However, it was observed in this research that many articles evaluate the use of recycled aggregates as the main method of alternative waste disposal in relation to landfills, with these aggregates being applied as road substrates or reincorporated into concrete [53,54].
To evaluate the second qualitative question, the methodology applied in the work was analyzed, and the results obtained are presented in Figure 5.It can be seen, from Figure 5, that the majority of studies are of an applied nature (56 in total), while 37 of them are theoretical research that generates knowledge that can base new studies that can create products and processes applied to a specific reality.As for the methods applied, case studies, literature/documentary review, statistical analysis, material flow analysis, questionnaires and interviews, life cycle assessment, input-product analysis, and virtual platform development were, in sequence, the methodologies used.
Osobajo et al. (2022) [52] identified in articles from 2007 to 2020 that literature review, case study, experimental methods, and interviews were the most used procedures, in descending order.It is observed that a more current sample of research has undergone modifications, with most studies being applied to specific contexts, using real data from neighborhoods, cities, or even countries to apply case studies that evaluate the management of material stock and waste construction and demolition, using material flow analysis techniques and statistical analysis together.
Still referring to the methodology, it is observed that in studies on the subject of systematization of material databases and quantification of material stock (22 in total), there is a standard for classifying buildings, with the vast majority being residential buildings, divided between single-family houses, multi-family houses, and apartment blocks.Nonresidential buildings are also evaluated, generally together, divided between commercial, It can be seen, from Figure 5, that the majority of studies are of an applied nature (56 in total), while 37 of them are theoretical research that generates knowledge that can base new studies that can create products and processes applied to a specific reality.As for the methods applied, case studies, literature/documentary review, statistical analysis, material flow analysis, questionnaires and interviews, life cycle assessment, input-product analysis, and virtual platform development were, in sequence, the methodologies used.
Osobajo et al. (2022) [52] identified in articles from 2007 to 2020 that literature review, case study, experimental methods, and interviews were the most used procedures, in descending order.It is observed that a more current sample of research has undergone modifications, with most studies being applied to specific contexts, using real data from neighborhoods, cities, or even countries to apply case studies that evaluate the management of material stock and waste construction and demolition, using material flow analysis techniques and statistical analysis together.
Still referring to the methodology, it is observed that in studies on the subject of systematization of material databases and quantification of material stock (22 in total), there is a standard for classifying buildings, with the vast majority being residential buildings, divided between single-family houses, multi-family houses, and apartment blocks.Nonresidential buildings are also evaluated, generally together, divided between commercial, industrial, and public service buildings, but only one of them evaluates infrastructure networks.Furthermore, most material quantification studies evaluate the existing stock, with five of them also combining forecasts for new construction to analyze the flow of materials over time.The data are presented in Figure 6.These data are also categorized according to the construction period, which determines which construction techniques and materials were used at the time, forming the so-called archetype.Based on this, a materials intensity, which is usually a unit of kg/m 2 or kg/m 3 and is based on literature or field observations, is multiplied by the number of residences in the study region, or by the built area and volume, according to each classification, totaling the volume or mass of materials available in each location [55].
Based on the description of the methodologies applied, the sequence of qualitative analysis of the articles was carried out using a matrix that evaluated the strengths, weaknesses, opportunities, and threats of buildings as a material bank as a circular economy tool.The results are described in Table 2.
industrial, and public service buildings, but only one of them evaluates infrastructure networks.Furthermore, most material quantification studies evaluate the existing stock, with five of them also combining forecasts for new construction to analyze the flow of materials over time.The data are presented in Figure 6.These data are also categorized according to the construction period, which determines which construction techniques and materials were used at the time, forming the socalled archetype.Based on this, a materials intensity, which is usually a unit of kg/m 2 or kg/m 3 and is based on literature or field observations, is multiplied by the number of residences in the study region, or by the built area and volume, according to each classification, totaling the volume or mass of materials available in each location [55].
Based on the description of the methodologies applied, the sequence of qualitative analysis of the articles was carried out using a matrix that evaluated the strengths, weaknesses, opportunities, and threats of buildings as a material bank as a circular economy tool.The results are described in Table 2.

Opportunities
OP1: Material and waste management with support from BIM OP2: Using Industry 4.0 technologies to promote circular construction OP3: Policies and enforcement of targets for value-added reduction, reuse, and recycling (upcycling), along with tax incentives for companies that meet targets OP4: Use of GIS systems, automated cadastral information systems and remote sensing OP5: Open and regulated digital platforms for management of construction, demolition, recycling, and commercialization of secondary materials OP6: Assessment, creation, and investment in local business models for CDW management OP7: Material passport OP8: Use of LCA to evaluate the impacts of production, replacement, and final disposal of components OP9: Industrial urban symbiosis OP10: Green public contracts OP11: Creation of new jobs OP12: Development of technologies for collection, transport, and processing of CDW OP13: Involvement of interested parties in the formulation of policies and analysis of material flow scenarios OP14: Encouragement of research and training in the areas of waste management and circular economy OP15: Public-Private Partnerships OP16: Pre-deconstructive audit protocols accessible to the initial design phase OP17: Product-service systems (material leasing) OP18: High cost and low availability of landfills for CDW disposal OP19: Identification of customer segments that value products with a lower environmental impact OP20: Smart cities OP21: Use of components in popular housing Threats TH1: Low cost of primary materials TH2: Market restrictions on the use of secondary materials TH3: Lack of regulation and supervision over CDW management TH4: Lack of support for LCA tools for managing the impacts of long-term reuse TH5: Lack of concern about scarcity of resources TH6: Uncertainty about the quality of secondary products TH7: Profit-oriented and change-resistant nature of the construction industry TH8: Uneven waste management policies around the world The following section presents discussions of the results.

Methodologies Adopted in the Literature to Implement Buildings as Material Banks
Based on the results presented in the previous section, several qualitative and quantitative methodologies were adopted in the literature for research involving DRC management through the evaluation of buildings as material banks, which vary according to the topic addressed.
Along these lines, 34% of the articles addressed the topic of Construction and Demolition Waste Management, with many of these proposing methodologies for quantifying the generation of construction and demolition waste in cities, as well as the amounts recycled, destined for landfills, or discarded irregularly, through case studies and statistical analyses.According to Lu et al. (2021) [56], knowledge of these data can support public policies to encourage more sustainable initiatives, such as applying sanctions for polluting practices, as well as supporting the population's awareness of this environmental problem.However, limited data in many regions still makes it difficult to accurately estimate the waste generated.
For Ghisellini, Ripa, and Ulgiati (2018) and Rahla, Mateus, and Bragança (2021) [32,57], studies on CDW management based on the circular economy still address recycling processes much more than reuse or reducing resource consumption.In the articles evaluated in this research, this behavior was also observed, in which many studies evaluate the use of recycled aggregate as the most sustainable alternative for CDW.Also, according to Ghisellini, Ripa, and Ulgiati (2018) [32], to make the evaluation of alternatives more robust, LCA, which is applied in many cases, must predict credits due to reuse and other life cycles, as well as incorporate life cycle cost assessments.
Regarding material quantification studies in urban regions, most of the studies evaluate the intensity of materials such as concrete, wood, steel, plaster, and glass and their geographic distribution.Among the studies that go beyond these analyses, Schiller, Gruhler, and Ortlepp (2017) [55] also evaluate environmental indicators of greenhouse gas emissions and water use, in addition to land use for each type and height of building, for the city of Melbourne, Australia.Approaches like this are relevant to relate the materials available in cities to their environmental impact, in addition to waste management and promoting better urban mining strategies [55].Furthermore, it is possible to establish a relationship between the spatiality of stocks and population density by checking obsolete buildings that can be immediate sources of resources [58].
As the only global assessment initiative, Marinova et al. ( 2020) [59] proposed a method for quantifying the stock of materials present in rural and urbanized areas of residential buildings based on information from databases on population, energy consumption demand, built area per capture, and the literature on material intensity.Although the research results have great uncertainties about the accuracy of the data due to the specificities of each region and data limitations in some locations, they can be a starting point for a global analysis of the stock of available materials and future flows of materials and waste, which can be predicted based on different scenarios of climate and socioeconomic changes.
Many of the research is based on Material Flow Analysis (MFA), which considers the inputs, stocks, and outputs of the system to estimate the expected amount of waste and can use top-down or bottom-up approaches.However, these are still very specific studies and difficult to replicate, as they depend on the availability of data in the region evaluated [60].Given these difficulties, some studies combine the use of tools such as the Geographic Information System (GIS), BIM, and statistical analyses, among others.Ortlepp, Gruhler, and Schiller (2018) [44] also suggest the use of sensitivity analyses to validate material flow analyses.
Among the studies that propose these methodologies, Yuan et al. ( 2023) [61] carried out a statistical analysis using machine learning algorithms to estimate a linear regression that could estimate the amount of demolition waste in the city of Hong Kong.Using waste data from 71 demolished buildings, the authors obtained a regression that described the amount of waste through six variables: year of construction, total number of floors, building height, total area, building perimeter, and type of use of the building.These variables are the most commonly used in studies on this topic.
Regarding the type of building, of the studies that applied methods that required this classification, 36.4% evaluated residential buildings, 45.5% residential and non-residential, and 4.5% only non-residential, data that are similar to the results obtained by Mohammadiziazi and Bilec (2022) [62], in which 50% of the articles evaluated residential constructions.However, the authors highlight the importance of evaluating data for non-residential buildings, since they have a shorter useful life and, consequently, end up generating a greater amount of waste.As for systematization, BIM and statistical analysis are used as support technologies.
Regarding research categorized as pre-deconstructive audit tools or methodologies, they include both studies on the evaluation of deconstruction or demolition alternatives, as well as the disposal of waste and components after this stage.According to Küpfer et al. (2021) [63], defining the ideal rates of reused components in a new project is a multidisciplinary task that must involve environmental, economic, technical, and logistical criteria.For Mollaei, Bachmann, and Haas (2023) [64], the main factors that affect the economic decision between demolition and deconstruction with recovery of components are the operational costs for deconstruction, environmental impact costs, recovery potential, and market value of secondary materials, in addition to the rates of landfill.In this way, these studies present tools that can facilitate the process for decision-makers.
Another topic covered was the use of technologies to support circular construction.Among the most relevant studies is that of Luciano et al. (2021) [65], who developed a unified virtual platform for managing the process of construction, demolition, and marketing of recycled products.The initiative was applied in Italy for public works and has the possibility of being replicated for any other location or company, as long as interested parties are willing to get involved in the process of developing and providing data.An alternative to facilitate the process may be the use of block chain technologies, which decentralize data management processes.
Business models for the circular economy were also a topic covered by only 4 articles.Among them, Nußholz, Nygaard Rasmussen, and Milios (2019) [66] and Meglin, Kytzia, and Habert (2022) [67] applied the life cycle assessment and case study methodology to validate the proposals.However, Meglin, Kytzia, and Habert (2022) [67] assess that only environmental indicators are not enough to promote the circular product chain; therefore, in their study, they proposed material flow analysis and input-output analysis with the aim of monetizing the indicators and verifying the sectors and companies that have the most influence on the purchasing process of secondary products.
It can be seen from the evaluation of the methodologies used that the gaps observed by Osobajo et al. (2022) [52] in the development of innovative circular construction models so that the industry adopts these principles in their activities have not yet been resolved, as only 4 studies have addressed the topic of business models for the circular economy.Therefore, more research on the topic is needed.To achieve this, it is also necessary to carry out a strategic analysis of the processes, and the SWOT matrix is then proposed, which is discussed below.

Potential Applications of Buildings as Material Banks in Mitigating the Environmental Impacts of Construction and Demolition Waste
Through the analysis of the SWOT matrix, referring to strengths, it is observed that designing buildings as future material banks reduces the environmental impact by incorporating reused and recycled materials in new projects, mainly reducing the carbon embodied in the production of new materials.This is because reuse avoids or postpones new construction and its embedded impacts [68].Therefore, project design and execution practices must be valued, even though the construction industry is focused on profit and is resistant to change [69].
To enable this, design alternatives for disassembly and adaptability (designing layers of different useful life independently) and a more judicious selection of materials that extend their useful life have the potential to be applied [68,70].In this case, the greater the durability and life cycles of the component, the lower its environmental impact will be by postponing the extraction of materials for new production.For this analysis, criteria for the LCA of multiple cycles must also be established, as well as the environmental impact resulting from each material alternative [71].
As for the project for disassembly and adaptability, it is a tool to be used in new buildings in order to promote the future reuse of the building, whether through the removal of its components or through adaptive reuse.In this case, disassembly avoids the extraction of resources for the production of new products [72], and adaptive reuse (ST14) promotes a new function for the existing park, optimizing land use and ensuring the updating of the building for new energy and energy requirements [73].
According to Munaro and Tavares (2023) [74], these techniques must be combined with eco design, standardization, modularization, and prefabrication (ST7) methods, which rationalize the construction process, reducing waste generated at the stage.In addition to these, the design for manufacturing and assembly also makes construction more efficient, since in the case studies evaluated by Nie, Dahanayake, and Sumanarathna (2023) [75], the reduction was between 60% and 90% of the waste generated.3D concrete printing was also mentioned as an option by the authors, an example being Dubai, which plans to build 25% of concrete components for construction with 3D printing by 2030, although the methodology still requires technological developments.
For Melella, Di Ruocco, and Sorvillo (2021) [76], the use of prefabricated construction systems with threaded connections is the most efficient for disassembly and subsequent reuse.However, it is important to relate these studies to the energy consumption of buildings throughout their life cycle [70], as with the greater energy efficiency of buildings, a large part of the impacts remain in the production and construction phases [77].Considering the possibilities of building rehabilitation, methodologies must combine indicators of energy consumption, water and materials, and waste management [78].
Furthermore, attention must be paid to the carbon incorporated in the processing and transportation of the material for reuse, as well as the source of data for LCA, as these are factors that directly impact the positive result of carbon savings [66].Regarding the risk of the existence of dangerous materials in the built stock, there are impacts from the point of view of the threat of contamination due to the use in older constructions of materials that are now prohibited, such as asbestos, in addition to the costs necessary for their safe removal [79].
Two other benefits of better material stock management are the reduction in land use due to waste being sent to landfills, as this will be an increasingly scarce resource.Furthermore, when it comes to mineral resources, the reduction of extractive activities can facilitate the recovery of large areas that currently serve as quarries to supply materials for civil construction [80].
Regarding the management of built stock, most of the studies focus on quantifying waste available in cities, which has the benefits of enabling better urban planning, optimizing resource and waste management, mitigating the environmental impacts of urbanization, and strengthening businesses places for reusing components, as long as they are encouraged by public authorities [81].
Even so, several authors point to the unavailability of accurate data on construction materials and components as one of the major challenges for research [60,81].Other obstacles are the lack of standardized methodologies for quantifying and evaluating the environmental impact of CDW, the costs and environmental impacts of transporting materials, which have a high density [82], and the short reuse gap due to construction deadlines from commercial partners and storage difficulties.
To mitigate these negative impacts, information systematization tools to speed up the purchasing process, as well as mechanisms for displaying and marketing secondary materials, can be applied [74].Regulated databases must be created to establish a standard of information and be open so that interested parties can supply them [83].Furthermore, these platforms can provide for the commercialization of materials, using Industry 4.0 technologies to support them, bringing the construction industry closer to the manufacturing industries, although studies on this need to be developed [84].
Volk et al. (2019) [85] performed a material flow forecast based on data from the building stock and proposing future resource optimization scenarios through stakeholder perspectives and German resource management policies.For the authors, stakeholder involvement is fundamental for formulating policies and estimating future use of resources.Research like this allows for better management of urban planning and building renovation, greater energy efficiency, and the promotion of the circularity of materials in public or private works.This is because, once mapped, it is possible to predict when their replacement will take place, the volume of waste in a given location, and the future demand for new materials [86].
For Zandonella Callegher et al. (2023) [87], this makes it possible to evaluate urban mining alternatives and establish policies to encourage the circular economy more effectively.[88] assesses that urban mining processes are essential to achieving sustainable development objectives in cities.However, to achieve the circular economy, it is necessary to assess the demand for reapplication of these components, strengthening recycling with high added value.
To operationalize this process, according to Mohammadiziazi and Bilec (2022) [62], the use of GIS softwares allows companies to manage demolitions, logistics, and commercialization of these materials.In a future scenario, manufacturers themselves could track, monitor, and perform reverse logistics for these construction products.Thus, a more regional mapping of materials is possible, enabling the commercialization of resources with less transport impact over long distances.However, the existence of fragmented and uncertain databases on the existing stock of materials remains a barrier to this [85].
When evaluating the stock of materials, distinguishing according to function (structural or non-structural) is relevant to better managing whether the resource will be available throughout the useful life of the building or only at the end [62].Regarding structural systems, Bertin et al. (2020) [41] proposed a management system for reuse, in which the structural engineer can consult the elements available for reuse when designing a new building based on the required resistance parameters.The idea is to reduce physical stock, promoting a just-in-time flow of materials.The authors highlight the need to make these structural elements traceable in order to monitor their performance throughout the operation and predict residual performance for new use.To operationalize this system, the authors propose using BIM, BigData, and RFID sensor technologies.
These tools, as well as artificial intelligence technology, are key pieces in implementing systematic circularity in construction [89].For the authors, simulation tools, learning algorithms, and 3D printing, among others, can support the systematization of circular solutions at all stages of a building's life cycle.According to Norouzi et al. (2021) [90], these technologies, which make up the fourth industrial revolution, called Industry 4.0, are essential for the transformation from a linear model to a circular economy in manufacturing industries.
According to the authors, smart cities align EC principles for government and society around an urban context with low environmental impact [90].When dealing with these technologies, BIM is also presented as a tool to be combined with LCA in order to evaluate the environmental impacts of the entire life cycle of the building through a digital tool [25].
Material passports are another concept that integrates digital technologies with the management of construction resources, serving as a digital document that follows and tracks construction materials and components throughout their life cycle, providing information on performance [91].They serve as an inventory of the building's elements, their composition, and possibilities for reuse and recycling, and can be a key piece for urban mining processes.Thus, it can be used in the initial phases of the project to verify the most sustainable alternatives [92].
For countries that already have a robust methodology for environmental audits of existing buildings, the methodology proposed by Wu et al. (2021) [79] can be applied as a way to systematize and validate a limited set of environmental inventory data.These can be compared to the existing stock of buildings to predict waste materials in those buildings.
However, for countries that do not yet have these methodologies, the creation of a standardized digital database is an alternative for greater efficiency in analyzing this information.In this sense, Mercader-Moyano, Camporeale, and López-López (2022) [93] apply a methodology in a case study of the construction of popular housing in Mexico, with which it is possible to estimate the amount of waste generated throughout the construction and its impact in terms of embodied energy, carbon emissions, and disposal of waste.
Evaluating buildings individually, Zatta and Condotta (2023) [94] highlight the need for evaluation protocols that are more accessible to professionals to encourage selective deconstruction and reuse of components in the initial phases of the project.The authors developed a simplified assessment method with five parameters covering environmental, economic, and social aspects.However, it is worth highlighting that very generic protocols can mask results by generalizing the possibilities of reuse according to the type of material, disregarding how the construction techniques used can impact the instruments needed for disassembly and transporting equipment.This has consequences both for the time spent on disassembly as well as for carbon emissions and the estimated reuse of components [94].
Other difficulties highlighted in the literature are the additional costs for deconstruction (even though the greater demand for labor can have a positive social impact), the difficulty in reusing elements of the existing park due to technical, structural, and performance problems, and consequently, the need to incorporate other materials to ensure safe reuse [94].
To contain these barriers, it is necessary to create guidelines to standardize and optimize these processes, as well as regulations and certifications for reused materials.Furthermore, in the case of demolition, the high cost and low availability of landfills for CDW disposal must be considered, which can encourage reuse [95].In contrast to the additional costs, in a case study applied to a bridge built in London, Medina and Fu (2021) [96] evaluated that replacing the original materials with more circular solutions would reduce construction costs by up to 62%.The type of concrete was replaced, from traditional to another with a higher residue content, granite to limestone, and asphalt with a reduced binder content.
Regarding CDW management processes, Mercader-Moyano, Camporeale, and López-López (2022) [93] warn that in less developed countries, such as Mexico, the laws are not strict, and there is no supervision over the disposal of this waste, which ends up in irregular landfills.Berge and Blottnitz (2022) [97] assess that there is an underreporting of the generation of construction and demolition waste, which, in addition to irregular disposal, can be reused in the informal market.In their study, the estimated waste generated annually reached almost four times the amount of waste formally notified in Cape Town.Likewise, in Bolivia, Ferronato et al. (2023) [53] in their study reached an amount of waste generation twice as high as that estimated by the government.
In order to produce revenues that encourage the correct disposal of waste, recycled aggregates (AR) plants can be a proposal.To this end, it is important to focus on sorting waste directly at the source in order to ensure higher product quality [53].Another possibility to contain this threat is the creation of local business models that promote a closed cycle of products, strengthen the local economy, and reduce the environmental impacts of irregular disposal [93].It is noteworthy that of the studies evaluated, recycling of aggregates was the main strategy to promote the circularity of construction waste, despite not being at the top of the waste hierarchy.
For underdeveloped regions, Peng, Lu, and Webster (2023) [82] assess that expected revenues may not be sufficient to cover the investments required for recycling facilities, requiring political incentives.Furthermore, the management of recycled waste must take transport distance into account, and it is recommended to shorten distances by creating small-scale recycling plants closer to large urban centers [98].From a technical point of view, Schiller, Gruhler, and Ortlepp (2017) [54] also analyze that there is a high rate of mass loss for the AR to meet the resistance requirements.For reuse in structural elements in Germany, the loss would reach 52%, and it is only possible to incorporate 35% to 45% of recycled masonry and concrete aggregates, respectively.
As for business models for the circular economy, Nußholz, Nygaard Rasmussen, and Milios (2019) [66] warn of two threats to the material reuse process: restricted access to secondary materials and market restrictions on the use of secondary materials.[99] found in the Netherlands that secondary materials would not yet have the capacity to meet the demand for new construction within the limits of the evaluated municipality.To contain these threats, opportunities include the formation of partner networks to supply secondary materials and the identification of customer segments that value products with a lower environmental impact.However, to make these partnerships effective, companies need to actively act in the sector, sometimes having to get involved in deconstruction processes [66].
From an organizational point of view, an alternative to enable better waste management can be public-private partnerships (PPP), although the bureaucracy of these contracts can be a challenge.It is necessary for governments to be involved in the formulation of public policies that encourage connections between different stakeholders in order to Sustainability 2024, 16, 5022 20 of 26 promote a multidisciplinary environment that assesses the environmental, economic, and social impacts of the process and can even finance circular business models [100].
Ramos, Martinho, and Pina (2023) [101] defend the need for integration between municipal management and micro and small businesses through strategies that facilitate better waste management.The first is the creation of municipal CDW storage spaces, which the City Hall makes available for local companies to use, training them in the correct separation of waste.In addition, municipal management must intensify construction site inspections to monitor CDW management, making companies aware of this as well as the importance of keeping documentation relating to these processes up-to-date.Despite this proposal, in Brazil, most city halls do not link small construction licenses to responsibility for correct waste management.
Public policies to encourage reused materials can also enhance urban mining [66].An existing example is a decree from Italy that determines that at least 50% of the mass of construction components, excluding installations, must be subject to selective demolition at the end of their useful life and be recyclable or reusable, with at least 15% made up of non-structural materials [76].
According to Ding et al. ( 2023) [102], greater awareness of the correct disposal of construction waste comes from government initiatives such as tax incentives for recycling and greater supervision of irregular waste dumping since professionals still do not perceive political control over this.Peng, Lu, and Webster (2023) [82] assess that public pressure can generate more satisfactory results; on the other hand, Nie, Dahanayake, and Sumanarathna (2023) [75] found that charging fees from contractors on generated waste was the greatest incentive for the application of CE practices.According to Iodice et al. (2021) [80], an alternative may be the application of clauses for the incorporation of recycled content in public works.
In addition to this, Véliz, Ramírez-Rodríguez, and Ossio (2022) [103] assess that professionals are more willing to pay for more efficient CDW management processes when they are aware of the importance of these practices and the circular economy.Therefore, it is important to invest in actions to expand professionals' knowledge on the subject, as well as in strategies to improve transport, management, and productivity of CDW management processes.
The low cost of primary materials is another threat that differs depending on each country's natural resource reserves.Countries like Brazil, for example, still have a substantial reserve of natural resources to subsidize construction activities, meaning the market is not concerned with initiatives to make the sector more sustainable [25].For Nunes and Mahler (2020) [104], Brazil, which has low-cost natural inputs for construction, is unable to make recycled or reused resources competitive, unlike Europe, which has greater recycling efficiency and more expensive raw materials.
To contain the problem, Zhang et al. (2022) [17] suggest targets to be imposed for value-added reduction, reuse, and recycling (upcycling), together with tax incentives for companies that meet the targets.In the case of Brazil, Hentges et al. (2022) [25] also warn of the market's concern with the accumulation of taxes on the product with each sale, which would make the different life cycles of a product unfeasible.Therefore, tax benefits for projects based on EC and using construction and demolition waste are essential and can be complemented with facilitated financing and reduced interest rates for this audience.
Innovations can also be applied at an organizational level, with the application of product-service systems, promoting a change in the construction production chain through the rental or sharing of reusable components, which would extend the useful life of these products and avoid the consumption of new materials.Or, alternatively, actions for urban industrial symbiosis are solutions that can be applied by the industry to better plan the reverse logistics of products, adding value in the process [105].However, they need understanding and acceptance from society to be successful.Schützenhofer et al. (2021) [11] see urban social mining as a new business model that enables the creation of jobs, bringing economic and social benefits.Second, [106] the application of these models must be considered in regional contexts, since imports or exports can cause transfers of impacts.For Arora et al. (2021) [107], it is necessary to verify the available markets for secondary resources in the local context, as they depend on consumer acceptance for the circulation of products.
In view of these analyses, it appears that despite advances in research, little progress has been made towards forming and testing business models aimed at circular construction through buildings as material banks, still in the theoretical field.However, indications from the literature can serve as guidelines for future work.

Conclusions
The present work aimed to investigate the state of the art of scientific literature on the relationship of the circular economy in civil construction with the conceptual model of buildings as material banks to mitigate the environmental impacts of construction and demolition waste.For the case studies identified, material flow analyses were applied by several works in order to facilitate CDW management through a forecast of material inputs and outputs, which can assist in more sustainable urban planning through the reinsertion of these products into the production chain.Furthermore, statistical modeling also supports this process, with some studies already using BIM and Industry 4.0 tools together to systematize the process.
There are also gaps in the development of databases that support these studies.It is observed that, in European countries, there are many databases available and systematized by public and private initiatives in order to establish control over the energy consumption of buildings.However, in other countries such as Bolivia, Mexico, and Brazil, which were evaluated, there is still a great underreporting and lack of control over the materials and waste present in cities.
From the analysis of the SWOT matrix, it is observed that the process of buildings as material banks must be evaluated in a comprehensive way through technical aspects, which mainly involve design techniques for disassembly, adaptability, and deconstruction.Furthermore, evaluating stocks and flows of materials to obtain better urban planning for the management of material resources present in the built environment and economic aspects, aiming to make the processes of deconstruction, logistics, transportation, storage, and marketing of secondary products viable.In this sense, it involves organizational strategies and new business models that support these initiatives.
Although many proposals foresee these processes, from a practical point of view, the case studies still evaluate the use of recycled aggregates as the main waste disposal strategy, even though this is not the first in the waste hierarchy.Therefore, future research should also focus on proposals for reduction, reuse, and recycling with high added value.Future studies should also evaluate alternatives for renewing the existing urban stock to make it more efficient from an energy point of view, since this solution can save material and financial resources, as well as planning a future stock in which the disassembly and re-functionalization of buildings are facilitated, since few studies have evaluated the stock transition through the analysis of new constructions.In this case, project technologies such as "design for x" and BIM, addressed in the SWOT matrix, are essential.
Finally, public policies that encourage the rational use of resources, promote the reuse and recycling of waste, and reduce as much as possible the environmental impact of extracting raw materials and disposing of materials in landfills or illegally.These policies may involve tax incentives for more sustainable proposals or charging more severe fees and taxes for illegal waste disposal or even landfilling.
The proposals still depend on the degree of development of the region under analysis, as the reality assessed by most of the studies, which are from developed countries in Europe, does not compare to the case of countries like Brazil, which do not yet have national incentive policies for the circular economy in construction and have only 8% of CDW recycled [104] and 45% recycling capacity with available plants [16].
Therefore, the work has a theoretical contribution not already available in other publications by evaluating the methodologies used in studies on buildings as material banks, which provides the opportunity to replicate these techniques in other regions, considering each specificity.Furthermore, it has a practical contribution, as the assessment carried out through the SWOT matrix is an important tool that can be used in future work aimed at making buildings economically and financially viable as material banks in order to achieve greater sustainability in constructive processes.
Research limitations and future research: There are two main limitations assessed for the methodology used in the research.As for the systematic literature review, for a more comprehensive analysis of studies, articles published in conference proceedings and book chapters could also be evaluated, as well as other databases that could be incorporated into the research.This would allow for more complete results on the geographic distribution of publications as well as more practical studies applying the concept of buildings as material banks.The European Union's BAMB project, for example, produced materials used in the theoretical review but that did not meet the RSL selection criteria.
In relation to the SWOT matrix, validation through interviews with experts who work in the region where the work was developed can help contextualize the analysis based on the local scenario of the construction industry.Mian et al. (2020) [108] propose, for example, that experts evaluate the importance of each of the factors listed in the SWOT in comparison with the others through an analytical hierarchy process (AHP), while Moutinho, Fernandes, and Rabechini (2024) [109] propose the use of focus groups using the Delphi method.These methodologies must be adopted following the research to validate the results with a specialist in the construction sector.

Figure 2 .
Figure 2. Publishing year of the articles.

Figure 2 .
Figure 2. Publishing year of the articles.

Figure 3 .
Figure 3. (a) Country of publication of articles; (b) division between continents.

Table 1 .
Eligibility criteria for articles for the study.
CI3 Management of construction and demolition components and waste CI4 End-of-life management of building stock CI5 Studies on design and construction of residential, commercial, or industrial buildings CE1 Does not study the construction industry CE2 Does not study the management of construction and demolition components and waste CE3 Studies on energy efficiency and water consumption in buildings and cities CE4 Performance assessments of specific waste and materials Sustainability 2024, 16, x FOR PEER REVIEW 8 of 27 CI5 Studies on design and construction of residential, commercial, or industrial buildings CE1 Does not study the construction industry CE2 Does not study the management of construction and demolition components and waste CE3