Novel Applications of Silk Proteins Based on Their Interactions with Metal Ions

: Silk secreted by Bombyx mori L. silkworm has become one of the most important biomaterials, due to its excellent biocompatibility, controllable biodegradability, superior processability, and unique mechanical properties. Silk ﬁbroin and sericin, as the two components of silk, contain abundant polar functional groups, and thus can bind metal ions through electrostatic interaction and chelation. Based on this binding, silk proteins not only can be used to fabricate ecofriendly and efﬁcient adsorbents to remove heavy metals from waterbodies, but also can synthesize metal nanostructures (nanoparticles or nanoclusters) to form silk/metal composites with amazing optical or electrochemical characteristics. This binding also can be manipulated to optimize silk’s performance. This review focuses on discussing and summarizing advances in the use of silk ﬁbroin and sericin for heavy metal ion-contaminated water remediation, biosensing materials, and electrochemical materials from the perspective of the interaction between silk proteins and metal ions. The performance enhancement of silk using metal ions is also analyzed. Moreover, the silk proteins’ interactions with metal ions and related structural features that contribute to the above sustainable applications are illustrated to lay a theoretical foundation. This review will favor the expansion of the applications of silk in both the traditional textile ﬁeld and new biomaterials.


Introduction
The silk spun by Bombyx mori L. silkworms has been used as a textile material in China for nearly four thousand years [1,2].The pristine silk fiber is composed of a core of silk protein, silk fibroin (SF), and an outer layer of silk protein, silk sericin.The sericin wraps the SF.SF is obtained from a degumming process to remove the sericin and is the component used for textiles, while sericin is usually discarded as waste [3].Today, the use of silk proteins has expanded from the textile field to many new fields, including environment remediation, bioengineering, and intelligent electronics, due to their outstanding mechanical properties, biocompatibility, biodegradability, and processibility [4,5].
The fabrics made with SF are lightweight, and feature air permeability and a charming luster [6].Nevertheless, with the increase in silk fabrics' use in both the commodity textile world and high-tech fields, and the change in human aesthetic conceptions, silk is gradually unable to meet new needs in aspects of mechanical properties, color fastness, and flame retardancy, which promote researchers to modify the properties of silk [7].Therefore, silk is used in combination with other functional materials, or its morphology or components are changed [8][9][10][11].These investigations hope to enhance the mechanical properties, flame retardancy, and color fastness of silk fabrics, and at the same time, maintain some intrinsic properties, like the appealing luster, to cater to new application scenarios.
Regarding the optimization of silk's mechanical properties, intrinsic and extrinsic technologies have been used by researchers [12,13].The intrinsic method means modifying the genetic sequences of silkworms since silk's properties highly depend on the amino acid coding sequences and conformation [14,15].Generally, genetic modification is complicated and very expensive.In contrast, the extrinsic method involving the in vivo change of physiological and biochemical environment and in vitro surface modification is simpler and more economical.Accumulating research has reported that the change of a single metal ion content and the whole metal ion environment can impart desirable mechanical properties to silk proteins through inducing conformation transition, which will offer a wider application for silk proteins in the traditional textile field at least [16,17].
Silk is known to be very popular in high-quality home products, like clothing, bedding, sofas, and curtains, but its fire risk must be kept as low as possible because the combustion of silk close to the skin will cause severe burns.The modification of silk's flame retardancy has become one of the focuses of research [18,19].The traditional flame-retardant agents are halogenated compounds, organophosphorus compounds, nitrogen-containing compounds, phosphorus-nitrogen synergistic compounds, and zirconium and titanium metal complexes [18,20].Unfortunately, these agents have problems with toxicity, environmental persistence, and bioaccumulation [21][22][23].Therefore, the development of environmentally friendly and sustainable flame retardancy methods is necessary.The research found that metal salts could hinder the thermal decomposition of polymers during combustion and metal chelates favored the formation of char [18,24].Considering that silk proteins contain abundant carboxyl, amino, hydroxyl, and amide groups, which can chelate metal ions well, the flame-retardant effect of metal ions on silk fabrics has been investigated [19,25].The use of metal ions may be an environmentally sound and efficient method to augment the flame retardancy of silk fabrics and a detailed summary can shed light on further study.
According to previous reports, approximately 12% of used chemical dyes enter the sewage effluent, and 20% of this enters nature from the treated sewage effluent [26].The accumulation of synthetic dyes, mordants, and finishing materials from the textile industry will pose a huge threat to the environment, demonstrating the need to find environmentally sound methods to improve the color fastness of silk.Due to their stable binding to silk, metal ions are found to facilitate the color fastness of silk fibers, and many studies have been conducted to explore this, which may substantially reduce the discharge of synthetic dyes and mordants and offer a new ideal for the dyeing process of silk fibers [27][28][29].
Apart from the traditional fabric industry, silk has been used in environment remediation as an adsorbent to remove heavy metal ions from contaminated water [30].Heavy metal pollution in waterbodies has been considered a serious problem because it causes profound harm to the ecosystem and human health due to the high toxicity and persistence of natural degradation [31].For instance, Cr 6+ can cause epigastric pain, nausea, and vomiting [32], and prolonged exposure to Cr 6+ can cause lung cancer [33].The conventional approaches for the removal of heavy metal from waterbodies primarily involve precipitation by chemical agents, redox reactions, adsorption using activated carbon, electrochemical treatment, ion exchange using resins, solvent extraction, and evaporation [34].Among them, adsorption is very popular because it has the advantages of high efficiency, easy operation, and wide sources.Due to the contaminated water that remains to be processed containing not only heavy metals, often with low concentration, but also light metal ions, often with high concentration, selective and focused adsorption with high efficiency is challenging.Meanwhile, structural integrity, ion desorption, and no secondary pollution are required.These requirements render ecofriendly and economical adsorbents well warranted [35].Silk proteins adsorb heavy metal ions through chelation and electrostatic interactions.SF or sericin are often made into films, beads, and particles, or combined with other ecofriendly adsorbent materials using a mild process outlined in studies on their adsorption performances [3,36,37].The silk-based composite adsorbents not only exhibit better adsorption efficiency compared to silk, but also maintain the same characteristics as silk, including selective adsorption, durability, and biodegradability [36,38].This indicates that silk-based composite adsorbents have a great potential for practical application in the treatment of heavy metal ion-contaminated water.
Besides environmental protection and restoration, the biodegradability and tight adsorption of metal ions of silk proteins also open up new applications for them in biosensing.In recent years, metal nanoparticles (NPs) and nanoclusters (NCs) have occupied researchers' attention in biosensing owing to their simple and green synthesis, unique properties, and cell viability [39][40][41].Among these metal nanostructures, noble nanostructures are more prominent owing to their special optical properties, hierarchical structure, and catalytic properties [42].Gold nanostructures can be obtained through simple approaches owing to their stability in aqueous solutions.Nevertheless, other metal nanostructures, including silver nanostructures, are relatively active in aqueous solutions, for instance, silver NPs usually exist as colloids in aqueous solutions [43], and thus, their applications are limited because their optical properties are highly dependent on the size and morphologies [44].If silver NPs are synthesized in aqueous solutions, stabilizers and redundant processes are required, which also will change the properties of silver NPs [45].Finding proper solid support where silver ions and other metal ions can be reduced to zero-valent atoms in situ in mild conditions is overwhelmingly difficult.Fortunately, researchers have found that SF is a good template for silver and gold NPs because the tyrosine of SF has reduced reducibility [46][47][48].Taking the silver ion as an example, under ultraviolet (UV) light, the phenolic hydroxyl of the tyrosine side chain is oxidized to a carbonyl group, while the silver ion is reduced to a silver atom.Using biocompatible SF as a template and/or a component to fabricate metal nanostructures with specific properties on optics and surface chemistry in situ makes the fabrication more ecofriendly and simpler as well as expands the application to in vivo micro monitors and smart consumer electronics for the observation of food quality and environment [49][50][51][52].
Another novel field of application for silk proteins, based on their interaction with metal ions, is electrochemical materials, including energy-storage materials for the preparation of micro batteries to power implantable devices and carbon-based electrocatalytic composite materials for the catalysis of hydrogen evolution reactions (HERs), oxygen evolution reactions (OERs), and oxygen reduction reactions (ORRs) [53,54].Transient implantable medical bionics offer great possibilities for intelligent controlled release of drugs and tissue regeneration, like wounding healing [55].Nevertheless, this technology suffers from power systems with controlled biodegradation.Silk proteins, as natural proteins, are a promising material to fabricate implantable micro energy-storage units for bionics because they have tunable biodegradation, minimal immunogenic response to the human body, and can entrap metal ions and active molecules for power supply.Owing to chelation and electrostatic interactions, metal ions can be uniformly deposited on SF-based templates or two-dimensional (2D) and three-dimensional (3D) porous nanostructures.This advantage is also favorable for the fabrication of catalysts, which promote the nucleation of metal NPs on the carboxyl and hydroxyl of SF.Additionally, silk proteins have a high content of nitrogen, and thus other nitrogen sources are no longer needed when preparing N self-doping carbon [56].The silk-based electrocatalysts are inexpensive, efficient, and stable for HERs and OERs.It has been found that the obtained carbon catalyst exhibited a unique hierarchical porous structure with pores of varying size, exposing more implantation sites for catalytic active metals [57][58][59].
Based on the above introduction to the effects of metal ions on silk's properties and the emerging application of silk/metal composites, the review aims to elucidate the optimization of silk properties and the expansion of applications based on its interaction with metal ions.The novel applications include heavy metal-contaminated water remediation, silk-based biosensing materials, and silk-based electrochemical materials.The interactions of silk proteins with metal ions, and their properties that contribute to the above novel applications, are also clarified to give a theoretical foundation.

Amino Acid Composition
Bombyx mori L. silk is composed of SF and sericin, featuring an elliptical cross-section and a diameter of approximately 30 µm (Figure 1A).The SF contains two SF fibers, each of which exhibits a triangular or semi-elliptical shape, with a diameter of roughly 10 µm.In silk, SF comprises 70-80%, while silk sericin accounts for about 20-30% [3,49,60].

Interaction of Silk Proteins with Metal Ions
The bond between animal proteins and metal ions deeply affects the function and application of animal proteins.The interaction of silk proteins with metal ions includes electrostatic interaction and chelation [34,35,[83][84][85].The electrostatic interaction is generally the ionic interaction between the negatively charged functional groups of silk proteins and positively charged metal ions.The silk proteins possess abundant polar functional groups with a negative charge, which include -COOH, -NH2, -OH, -CO-NH-, -CO-, and -S-S- [86,87].These negatively charged functional groups provide binding sites for metal ions.In addition, these polar functional groups contain atoms with lone pairs of electrons, including O and N [54,88,89].These atoms are prone to chelate with electron-deficient metal ions, forming coordinate bonds.The electrostatic interaction and chelation impart a strong affinity for metal ions to silk proteins.The preferential interactions of an SF peptide and two artificial peptides (RLWRLLWRLWRRLWRLLR (C6M1) and RLLRLLLRL-WRRLLRLLR (C6)) with Cu 2+ than anthocyanin and the resulting protective effect on anthocyanin set excellent examples [90][91][92].
The formation of silk/metal composites usually results from the combined effect of these two interactions, which can be demonstrated with the following examples.In an ultrafiltration experiment using sericin biopolymer, the removal efficiencies of five metal ions (Pb 2+ , Co 2+ , Ni 2+ , Cu 2+ , and Zn 2+ ) increased, and their permeate fluxes decreased with increasing sericin dose at neutral pH before reaching a plateau [83].This was attributed to the higher availability of anionic reactive sites and more atoms containing lone pairs of electrons with increasing sericin dose, leading to more metal ions forming complexes with sericin.The chelation reaction between divalent metal ions and poly dentate ligands (PDLs) of sericin (S), such as NH2-, -S-S-, and -COOH, can be written as Equation (1).Furthermore, this study found that -NH2 was very effective in promoting metal ion binding to sericin and served as an example for illustrating chelation (Figure 2A).Stable sericin/metal complexes were formed due to abundant active amino groups chelating with metal ions.The structure of the active amino groups changed with pH: -NH2 tended to be deprotonated at basic pH, making sericin negatively charged, while it tended to be The SF is a macromolecular and fibrous protein comprising three elementary units: a fibroin heavy chain (H-chain), a fibroin light chain (L-chain), and a glycoprotein (P25) [61][62][63].The H-chain consists of roughly 5200 amino acid residues, including glycine (45.9%), alanine (30.3%), serine (5.3%), valine (1.8%), and 15 other amino acids.It is composed of four different domains: crystalline domain, amorphous domain, N-terminal, and C-terminal [64,65].The crystalline domain primarily consists of several repetitive polypeptide segments, of which two hexapeptides (Gly-Ala-Gly-Ala-Gly-Ser (GAGAGS) and Gly-Ala-Gly-Ala-Gly-Tyr (GAGAGY)) account for approximately 70%, simplifying the amino acid sequence of the crystalline domain (Figure 1B,C) [66,67].The crystalline domain and amorphous domain alternate within the H-chain.The L-chain has no repetitive polypeptide segments and is predominantly composed of alanine and aspartic acid.The H-chain and L-chain are connected by a disulfide bond between Cys-c20 (the cysteine residue located at the 20th position from the C-terminal of the H-chain) and Cys-172 of the L-chain [68].The bond is crucial for fibroin's normal secretion from the posterior silk gland.Without it, the secretion of SF will be impeded [69,70].The dominant crystal structure of natural SF constitutes Silk I and Silk II [71,72].The Silk II is an antiparallel β-sheet structure and is a stable crystal structure due to the powerful hydrogen bond between neighboring peptide blocks, which imparts excellent mechanical performances such as high tensile strength and toughness to SF [71,72].Like SF, sericin is also a macromolecular protein.However, it is globular and usually discarded during the silk degumming process [73,74].It envelopes SF like glue, cementing two SF fibers together into SF, and facilitating the flow of SF in silkworms [75,76].Silk sericin is generally believed to constitute 18 amino acids, among which the two most abundant amino acids are aspartic acid and serine, which account for approximately 33.4% and 16.7%, respectively [77,78].
The amino acid composition of SF and sericin set the basis for the interaction of silk proteins with metal ions.For one thing, the oxygen atom of carboxyl groups and the nitrogen atom of amino groups in amino acids contain lone pairs of electrons.After dehydration condensation, the oxygen atom and nitrogen atom in amide groups can coordinate with metal ions.In addition, the terminal carboxyl groups, terminal amino groups, and some groups in the side chains of amino acid residues (like the hydroxyl of sericin [79,80]) can also adsorb metal ions through coordination.Furthermore, silk proteins possess amphoteric behavior.When the pH of a solution exceeds its isoelectric point (3.6-5.2 [81,82]), it releases protons, becoming negatively charged, and therefore it can bind with metal ions electrostatically.

Interaction of Silk Proteins with Metal Ions
The bond between animal proteins and metal ions deeply affects the function and application of animal proteins.The interaction of silk proteins with metal ions includes electrostatic interaction and chelation [34,35,[83][84][85].The electrostatic interaction is generally the ionic interaction between the negatively charged functional groups of silk proteins and positively charged metal ions.The silk proteins possess abundant polar functional groups with a negative charge, which include -COOH, -NH 2 , -OH, -CO-NH-, -CO-, and -S-S- [86,87].These negatively charged functional groups provide binding sites for metal ions.In addition, these polar functional groups contain atoms with lone pairs of electrons, including O and N [54,88,89].These atoms are prone to chelate with electron-deficient metal ions, forming coordinate bonds.The electrostatic interaction and chelation impart a strong affinity for metal ions to silk proteins.The preferential interactions of an SF peptide and two artificial peptides (RLWRLLWRLWRRLWRLLR (C6M1) and RLLRLLLRLWRRLLRLLR (C6)) with Cu 2+ than anthocyanin and the resulting protective effect on anthocyanin set excellent examples [90][91][92].
The formation of silk/metal composites usually results from the combined effect of these two interactions, which can be demonstrated with the following examples.In an ultrafiltration experiment using sericin biopolymer, the removal efficiencies of five metal ions (Pb 2+ , Co 2+ , Ni 2+ , Cu 2+ , and Zn 2+ ) increased, and their permeate fluxes decreased with increasing sericin dose at neutral pH before reaching a plateau [83].This was attributed to the higher availability of anionic reactive sites and more atoms containing lone pairs of electrons with increasing sericin dose, leading to more metal ions forming complexes with sericin.The chelation reaction between divalent metal ions and poly dentate ligands (PDLs) of sericin (S), such as NH 2 -, -S-S-, and -COOH, can be written as Equation (1).Furthermore, this study found that -NH 2 was very effective in promoting metal ion binding to sericin and served as an example for illustrating chelation (Figure 2A).Stable sericin/metal complexes were formed due to abundant active amino groups chelating with metal ions.The structure of the active amino groups changed with pH: -NH 2 tended to be deprotonated at basic pH, making sericin negatively charged, while it tended to be protonated at an acidic pH, making sericin positively charged.In addition, each bivalent metal ion chelated with four -NH 2 .This illustration of sericin's charge is consistent with a study in which silk microparticles were used to adsorb Cr 6+ in aqueous solutions [93].The study found that the net charge of sericin was positive at pH 1-2.The reason was that the isoelectric pH of sericin was approximately 4.0 due to carrying more acidic amino acid residues, for example, glutamate acid and aspartic acid, than basic amino acid residues [82,94].The dominant existing forms of Cr 6+ were H 2 CrO 4 , HCrO 4 − , and Cr 2 O 4 2− at pH below 1, 2-6, and above 6, respectively [95].At pH 1-2, owing to the electrostatic interaction of the negative metal ions with the positively charged sericin, sericin microparticles adsorbed Cr 6+ effectively and the adsorption capacity exhibited a downward trend as pH increased from 1 to 5. Note that the study reflects that although sericin still interacted with metal ions due to a combination of electrostatic interaction and chelation, the charge of the substance participating in the binding and the binding site could be different and varied with reaction parameters, such as pH and the properties of metal ions.Another study also demonstrated that the interaction between sericin and metal ions was dominated by chelation and electrostatic interaction between sericin's active amino groups and metal ions (Figure 2B) [96].Due to the stronger chelation and electrostatic interaction between sericin and metal ions, metal ions in aqueous solutions first interacted with sericin and then with anthocyanin, making anthocyanin a suitable indicator for the saturation state of adsorption for the filter membrane.Due to the formation of coordinate bonds, the adsorption using silk proteins was mainly chemical and follows a pseudo-second-order kinetic model [93,[97][98][99].
metal ions due to a combination of electrostatic interaction and chelation, the charge of the substance participating in the binding and the binding site could be different and varied with reaction parameters, such as pH and the properties of metal ions.Another study also demonstrated that the interaction between sericin and metal ions was dominated by chelation and electrostatic interaction between sericin's active amino groups and metal ions (Figure 2B) [96].Due to the stronger chelation and electrostatic interaction between sericin and metal ions, metal ions in aqueous solutions first interacted with sericin and then with anthocyanin, making anthocyanin a suitable indicator for the saturation state of adsorption for the filter membrane.Due to the formation of coordinate bonds, the adsorption using silk proteins was mainly chemical and follows a pseudo-second-order kinetic model [93,[97][98][99].
Metal-Sericin Complexation: where PDL is short for poly dentate ligand, and S is short for sericin.Metal-Sericin Complexation: where PDL is short for poly dentate ligand, and S is short for sericin.

Factors Influencing the Interaction of Silk Proteins with Metal Ions
Several factors influence the interaction of silk proteins with metal ions, such as pH, contact time [93], temperature [34,97], and metal ion properties [97,[100][101][102] (Figure 3).pH plays a crucial role in the chemical formula (partially due to pronation and deprotonation (Figure 2C) and the surface charges of sericin and metal ions.Therefore, pH is the main influencing factor for the adsorption of metal ions by sericin [93,103].The adsorption capability is a function of contact time, which can be employed to determine the adsorption kinetic model.Throughout the adsorption process, the adsorption capability of a sericin-based adsorbent typically exhibits a rapid increase, followed by a gradual increase before reaching a plateau.The plateau signifies that the adsorption of metal ions is saturated because active sites are no longer available in the adsorbent materials [93].The equilibrium time is defined as the duration of the adsorption process, while the maximum or saturated adsorption capacity refers to the amount of adsorbed metal ions.In practical applications, contact time affects the cost-efficiency of adsorbents for metal ions.Temperature is another critical factor influencing the interaction mechanism between metal ions and silk proteins.The adsorption can be classified as either endothermic or exothermic, based on the variation of metal ion adsorption capacity with temperature.If the capacity increases with rising temperature, the adsorption is endothermic, and vice versa.The binding-free energy for silk proteins to different metal ions primarily pertains to the properties of metal ions, including charge-accepting ability, ionic radius, and valence state.The electrostatic interaction between the negatively charged ligands in silk proteins and metal ions, as well as the charge-dipole interaction between metal ions and noncharged ligands in silk proteins, is stronger when metal ions carry a higher net charge.For groups IA and IIA, a larger ionic radius results in a smaller charge density, endowing ions with lower electronegativity and subsequently reducing their affinity to silk proteins.However, this rule does not apply to groups IB and IIB due to significant relativistic effects [104].For groups IB and IIB, although the ion with a larger radius has a smaller charge density, the relativistic effect leads to a strong stabilization of the vacuum 6s orbital, which enhances the charge-accepting ability and thus its interaction with negatively charged ligands.For instance, Hg 2+ and Au + had a stronger charge-accepting ability than Zn 2+ and Ag + that belong to the same groups in the periodic table, respectively.When two metal ions have similar valence states and radii, the one with a stronger charge-accepting capability demonstrates a greater affinity to silk proteins and forms a more stable silk protein/metal complex than the other, for which the interactions of sericin with Mg 2+ and Zn 2+ set a good example [104].

Biocompatibility
The use of pristine silk-based biomaterials in surgeries or in vivo studies will likely trigger an inflammatory response, allergy, and immunogenicity [106].However, SF, obtained by completely removing the sericin layer from pristine silk using the degumming process, causes a minimal immunogenic reaction, which lays the foundation for their increasing applications in biomaterials [107][108][109].In a study, SF was used as a bridging agent Adapted with permission from ref. [105].Copyright 2016, American Chemical Society.

Biocompatibility
The use of pristine silk-based biomaterials in surgeries or in vivo studies will likely trigger an inflammatory response, allergy, and immunogenicity [106].However, SF, obtained by completely removing the sericin layer from pristine silk using the degumming process, causes a minimal immunogenic reaction, which lays the foundation for their increasing applications in biomaterials [107][108][109].In a study, SF was used as a bridging agent to selfassemble 2D MXene nanosheets into a continuous wave-shaped lamellar macrostructure, which endowed the obtained SF/Ti 3 C 2 T x MXene films with good biocompatibility [110].Results showed that these films had a good viability (99.5% ± 0.8% after 144 h) for human skin fibroblast-HSAS cells in a cytotoxicity test, and therefore were safe for subcutaneous implantation.Similarly, SF was used to enhance the biocompatibility and biodegradability of the designed multifunctional biocomposite scaffold in another study [111].Results showed that the obtained SF, cellulose, and β-cyclodextrin-based hydrogel modified by magnetic copper-doped cobalt ferrite (CuCoFe 2 O 4 ) had a cell viability of 84.74% after three days and 80.55% after seven days in an MTT (3-(4,5)-dimethylthiahiazo (-z-y1)-3,5-diphenytetrazoliumromide) assay using Hu02 cells, and there was no significant difference in statistical analysis between it and untreated cells.Its hemolytic effect was also low (below 3%).Therefore, this hydrogel had good biocompatibility.
The previous comparative tests between pristine silk and sericin-free silk speculated that it was sericin that triggered the immunoreaction [112][113][114].However, sericin by itself has been observed to cause minimal immune responses [115,116].It can promote the migration of fibroblast at a concentration of 100 µg/mL in vitro scratch assays, shortening the wound length, and ameliorates the re-epithelialization of a burned surface and its complete healing in a clinical study, without any infection or severe immune reaction [117].Sericin has almost no adverse effects on the viability of NCM460 cells (94.8%) at a concentration of 100 µg/mL after 48 h co-incubation and the encapsulation by it can greatly increase the cell viability of caffeic acid [118].Furthermore, a study demonstrated the similarity of immunogenicity between SF and sericin because after being implanted subcutaneously into ten Sprague-Dawley rats for nearly five months, the pristine silk and SF did not induce any infection or other anomalies, the surgical wounds healed well, and a mass of connective tissue wrapped the implants [119].The immune reaction reported in previous studies may pertain to sericin's dose and molecular weight because the collagen-SF-sericin scaffolds show no evident inhibitory effect on the proliferation, attachment, and spreading of fibroblast cells, and low-molecular-weight sericin at a concentration of 1 mg/mL shows great cell viability for fibroblast and macrophages and human adipose stem cells [115,120,121].

Biodegradability
Biodegradability is another important property that enables new uses for silk proteins.Silk is degraded mainly by enzymatic activity.Since it is composed of amino acids, silk proteins will be degraded into soluble peptides and free amino acids, which do not cause environmental pressure and can be absorbed in in vivo studies.The enzymes used for the degradation of silk proteins involve various proteases (like protease XIV, chymotrypsin, carboxylase, and lysozyme [122]).The protease acts on the surface of silk materials, reduces the hydrophilic segments in the structure, and progressively removes the β-sheet structure in silk proteins.The degradation by protease XIV occurs on both the crystalline and amorphous domains [123,124].
The degradation of silk proteins is affected by numerous factors, including temperature, processing method, structure, porosity, SF concentration, etc. [123,[125][126][127][128][129].In a study, after 21 days of degradation, as the SF content increased from 21.3% to 44.8%, the weight loss of porous SF/cellulose nanofibril sponges increased from 15.4% to 19.1% in phosphate-buffered saline (PBS) solution and from 29.3% to 44.0% in protease XIV solution [130].In another study, the degradation rate of a silk I scaffold was different after different post-treatments including ethanol and high-temperature/high-pressure, which might have resulted from the crystallinity variation and the formation of a few β-sheet crystals [131].
The degradation rate of silk proteins is often evaluated via mass loss, mechanical properties, morphology variation, and molecular weight [124,[132][133][134].In a study, the mass of milled silk particles reduced rapidly to 40%, the volume median particle size decreased from 6.4 to 1.8 µm after 12 days, and the morphological changes in silk particles and fibers were analyzed using SEM, based on which, a model reflecting the degradation mechanism of milled silk particles was established [124].Another study reported that the native and PEGylated silk NPs had a mass loss of 60% and 40%, respectively, of the original mass, increased size, and reduced amorphous content in the silk secondary structure [135].

Mechanical Property and Processability
Bombyx mori L. silk exhibits an ultimate tensile strength of 740 MPa and a modulus of 10 GPa.Its breaking strain is 20% and the Young's modulus is 4.53-57.11GPa [136,137].The mechanical property of SF differs from Bombyx mori L. silk slightly due to the removal of sericin.The comparison among pristine silk, SF, and several other natural polymers demonstrates that pristine silk and SF possess higher tensile strengths [136,138,139].To obtain the desired mechanical properties for better applications, silk proteins can be modified using different methods, including processing technologies, solvent composition, temperature, and molecular weight [140][141][142][143]. Specifically, as the molecular weight of sericin increased, the gel strength increased, and the bending strength and bending strain of the sericin sponge remarkably increased in both dry and wet states [143].Another study found that the SF hydrogel made based on the conformation transition induced by hexafluoroisopropanol and deionized water, in turn, possessed a Young's modulus of 6.5 ± 0.2 MPa, ten to hundred times higher than that of the conventional hydrogel (0.01-1 MPa) [144,145].
Besides biocompatibility and biodegradability, the unique physical and chemical structures impart silk proteins with versatile processability [146,147].Extensive literature indicates that silk can be processed into various shapes, including films, hydrogels, sponges, microparticles, and microneedles [5,[148][149][150][151][152].A smart microneedle for glucose-responsive insulin delivery was created by SF and phenylboronic acid/acrylamide.After optimization, the needle region was made by SF and phenylboronic acid/acrylamide, and the base layer was made by SF.This microneedle enabled insulin release in a way corresponding to the insulin's change [5].Another study prepared SF NPs with a diameter of 229-2286 nm and load efficiency of 22-40% using emulsification.The smaller NPs (with a diameter of about 200 nm) showed a shorter plasma circulation time and greater maximum plasma concentration than the larger NPs (with a diameter of about 800 nm).

Application Based on the Interaction between Silk Proteins and Metal Ions
The interaction of silk proteins with metal ions and their outstanding properties not only enhances their applications in the conventional textile industry, but also ushers in novel applications in environmental remediation, bioengineering, and electrochemistry [18,153,154].

Performance Optimization of Silk Fabric
Silk textiles have been used in China for nearly four thousand years, though they are plagued with unsatisfactory mechanical properties and flammability [1,2].To solve these problems, much work has been carried out, finding the binding of metal ions with silk proteins enabled the optimization of mechanical properties and the improvement of flame retardancy and color fastness [19,25].

Mechanical Property Optimization
The silk fibers' mechanical properties pertain to the metal ion environment in silk glands, especially in the anterior gland.A study reported that the content of metal ions in the anterior silk gland is higher than that in both the middle and posterior silk glands, and a specific metal ion environment in the anterior silk gland is kept for the silk proteins' transport and conformational transition [155].In another study, the silk fibers' mechanical properties were improved by genetically interrupting the ionic environment for silk formation (Figure 4A) [16].As silks' Ca 2+ content decreased due to overexpressing endoplasmic reticulum Ca 2+ -ATPase (an ion-transporting protein) in the anterior silk gland, more β-sheet and α-helix structures were observed, and the silk fibers' tenacity and extension increased noticeably.The study was an in vivo demonstration of the relationship between metal ion content and silk fibers' mechanical properties.
spun by these silkworms and LM/NaAlg hindered the conformation transition of SF from the random coil and α-helix structure to the β-sheet structure by forming hydrogen bond between LM/NaAlg and SF.Moreover, silk fibers spun by silkworms that were fed or in jected with ethylenediaminetetraacetic acid (EDTA), a strong metal chelating agen [157,158], in their fifth instar larvae exhibited a significant conformational transition from β-sheet structure to β-turn structure and their strength, toughness, and Young's modulu decreased greatly [11].
Additionally, silk fibers notably shrunk and curled after being treated with neutra calcium salts (e.g., CaCl2) at specific concentrations, leading to the development of elasti silk materials [159,160].The shrinkage and curling occur because Ca 2+ chelates with fibroi at the -OH of the serine side chain and the tyrosine side chain of SF macromolecula chains.This coordination disrupts some hydrogen bonds and Van der Waals force be tween fibroin peptide chains, causing fibroin protein molecules to rearrange, altering th orientation of the original stretched fibroin macromolecular chain.These results indicat that silk fibers' mechanical properties can be modified through in vivo changing the meta ion environment and in vitro metal ion treatment.The silk fibers' mechanical properties can be optimized through an in situ changing the metal ion environment through feeding or injecting metal ions into silkworms.The silk fibers spun by silkworms fed with Ca 2+ and PO 4 3− had more α-helix and random coil structures and fewer β-sheet structures, leading to higher fracture strength, elongation, and toughness modulus [8].The mechanical properties of silk fibers spun by silkworms fed with liquid metal alginate-coated NPs (LM/NaAlg) were greatly improved, with a breaking strength of 814 MPa and a breaking elongation of up to 70% (Figure 4B-D) [156].
Characterization results indicated that LM/NaAlg perfectly combined with the silk fibers spun by these silkworms and LM/NaAlg hindered the conformation transition of SF from the random coil and α-helix structure to the β-sheet structure by forming hydrogen bonds between LM/NaAlg and SF.Moreover, silk fibers spun by silkworms that were fed or injected with ethylenediaminetetraacetic acid (EDTA), a strong metal chelating agent [157,158], in their fifth instar larvae exhibited a significant conformational transition from β-sheet structure to β-turn structure and their strength, toughness, and Young's modulus decreased greatly [11].
Additionally, silk fibers notably shrunk and curled after being treated with neutral calcium salts (e.g., CaCl 2 ) at specific concentrations, leading to the development of elastic silk materials [159,160].The shrinkage and curling occur because Ca 2+ chelates with fibroin at the -OH of the serine side chain and the tyrosine side chain of SF macromolecular chains.This coordination disrupts some hydrogen bonds and Van der Waals force between fibroin peptide chains, causing fibroin protein molecules to rearrange, altering the orientation of the original stretched fibroin macromolecular chain.These results indicate that silk fibers' mechanical properties can be modified through in vivo changing the metal ion environment and in vitro metal ion treatment.

Flame Retardancy Enhancement
The enhancement of the flame retardancy of silk fibers with metal ions, resulting in an extended lifetime and reduced fire risk, has been demonstrated in many investigations [18,156,[161][162][163].After being immersed in Fe 3+ , Al 3+ , and Ti 4+ solutions, silk fabrics had a suppressed smoke generation, an increased limiting oxygen index (LOI) with increasing metal ions concentrations, and an increased char length with increasing washing cycles, indicating that both fire retardancy and washing resistance were improved by metal ions (Figure 5A) [18].The inflated structure features of char residues were consistent with the typical intumescent fire-retardant effect.Another reason is that the binding sites between metal ions and peptide chains are usually the carbonyl and amino of side chains near specific amino acid residues, like tyrosine residues.This binding seizes the excitation energy required for free carbonyl formation from tyrosine residues, thus preventing the breakage of peptide chains.Further, silk fabrics treated with casein phosphopeptide-ferrous salt (CPP-Fe 2+ ) and casein phosphopeptide-titanium salt (CPP-Ti 2+ ) exhibited a good, durable flame-retardant capability, with an LOI of 27.8% and 28.0%, respectively, and a residual char length of less 15 cm after 20 washes.In addition, the CPP-Fe 2+ treated fabrics also exhibited a brilliant yellow color and a good rubbing fastness (Figure 5B-D) [164].Likewise, silk fabrics treated with three flavonoids (baicalin, quercetin, and rutin) and two metal ions (Fe 2+ and Ti 4+ ) possessed a good char-formation capacity, leading to a flame-retardant capacity and smoke suppression, and antibacterial and antioxidant abilities [19].Their color fastness and rubbing fastness were enhanced with the mordanting treatments because coordination bonds were formed among silk fibers, metal ions, and flavonoids.These performances remained almost unchanged even after 20 washes.A further study of ref. [164] manifested that silk fabrics treated with 20% tannic acid and 2 g/L ferrous salt exhibited excellent flame retardant capability, antibacterial ability, and washing durability [25].The fabric's LOI rose from 23.6% to 27.5%, the antibacterial rate rose from 22% to 95%, and the length reduced from 30.0 cm to 11.2 cm.These performances remained almost the same as before being washed even after 20 washes.

Color Fastness Improvement
The improvement of the color fastness of silk fibers with metal ions is mainly due to the chelation between silk proteins and metal ions.The coordinate bonds formed between the polar functional groups (e.g., -NH2 and -OH) of silk proteins and metal ions can induce the conformational transition of silk peptides [165], which can change the available combination site between dyes and silk fibers (i.e., dye site).In addition, the conformational transition from the random coil (Silk I) to β-sheet can create a relatively stable solution environment, and thus enhance the combination between fibroin protein and dyes [166][167][168].In a study, silk fabrics were mordanted with two metallic mordants (SnCl4 and CuSO4) and three natural mordants (tannic acid, pinecone, and lemon peel) and were dyed with the dye extracted from spent coffee grounds [27].Three mordanting methods were used, including pre-, meta-, and post-mordanting.Results showed that metallic mordants led to higher color strength than natural mordants, and the dyed silk fabrics with all mordants exhibited appropriate color fastness to light and washing, especially under the postmordanting method.Additionally, silk fabrics, dyed with dopamine with the help of Fe 3+ and sodium perborate oxidant, possessed improved light fastness (Level 4) and an improved anti-UV property with a UV protection factor greater than 30 and UVA < 4%.Its hydrophobicity and weft-breaking strength were better than the pristine silk fabrics.Fe 3+

Color Fastness Improvement
The improvement of the color fastness of silk fibers with metal ions is mainly due to the chelation between silk proteins and metal ions.The coordinate bonds formed between the polar functional groups (e.g., -NH 2 and -OH) of silk proteins and metal ions can induce the conformational transition of silk peptides [165], which can change the available combination site between dyes and silk fibers (i.e., dye site).In addition, the conformational transition from the random coil (Silk I) to β-sheet can create a relatively stable solution environment, and thus enhance the combination between fibroin protein and dyes [166][167][168].In a study, silk fabrics were mordanted with two metallic mordants (SnCl 4 and CuSO 4 ) and three natural mordants (tannic acid, pinecone, and lemon peel) and were dyed with the dye extracted from spent coffee grounds [27].Three mordanting methods were used, including pre-, meta-, and post-mordanting.Results showed that metallic mordants led to higher color strength than natural mordants, and the dyed silk fabrics with all mordants exhibited appropriate color fastness to light and washing, especially under the post-mordanting method.Additionally, silk fabrics, dyed with dopamine with the help of Fe 3+ and sodium perborate oxidant, possessed improved light fastness (Level 4) and an improved anti-UV property with a UV protection factor greater than 30 and UVA < 4%.Its hydrophobicity and weft-breaking strength were better than the pristine silk fabrics.Fe 3+ acted as the catalyst of the oxidation polymerization of dopamine and the bridge between dopamine and fibers [169].
In addition to the improvement of mechanical properties, flame retardancy, and color fastness, binding with metal ions also can improve silk fabrics' anti-UV, antibacterial, antioxidant properties, etc. [170][171][172][173][174][175].For instance, in another study, multifunctional silk fabric was created by coating polydopamine on the silk fabric's surface and then treating the polydopaminecoated fabric with FeSO 4 [170].The results showed that the Fe 2+ treated silk fabric had a much higher UV protection factor (38.77%) than untreated silk fabric (3.84%).Anti-infection and osteogenesis are vital for successful bone defect repair.In a study, a synthetic bone grafting material, polyetheretherketone (PEEK), was coated with the SP that contained CuO microspheres and Ag nanoparticles to reduce inherent bioinertness [171].Under a physiological environment (pH 7.4), the SP released Cu 2+ and Ag + , promoting the production of alkaline phosphate, collagen, and NO and the Ca 2+ deposition.An in vivo study showed the PEEK that was coated with the SP containing CuO microspheres and Ag nanoparticles had the largest new bone volume compared to uncoated PEEK and CuO-coated PEEK.To sum up, metal ion treatment will impart novel applications to silk fabrics.

Heavy Metal-Contaminated Water Remediation
Due to the strong chelation between metal ions and silk proteins, and the biodegradable and inexpensive nature of silk proteins, they can be employed to remove heavy metal ions (like Cr 6+ and Pb 2+ ) from water [64].The potential application of silk proteins in heavy metal-contaminated water remediation has been widely studied (Table 1).A 3D flower-like hierarchical biohybrid structure was fabricated using sericin, copper sulfate, and PBS (Figure 6A,B) [105].The strong chelation of the amide backbone and sericin's polar side chains with metal ions led to kinetically controlled growth of the flower's thin petals in the early growth stage.The subsequent experiment found the fabricated biohybrid flowers had a large BET surface area, and due to these results plus the surface polar functional groups of sericin, the flowers exhibited superior adsorptions of Pb 2+ , Cd 2+ , and Hg 2+ in both batch filtration and continuous filtering process.In addition, the fabricated flower demonstrated selective adsorption for Pb 2+ over Ca 2+ , indicating the sericin-mediated flower compounds were a promising adsorbent for water treatment.The silk fibroin/cellulose acetate (SF/CA)blend nanofibrous membrane was fabricated by an electrospinning approach and had a higher affinity for Cu 2+ than its components (Figure 6C,D) [34].The obtained membrane constituted randomly oriented ultrafine fibers with a diameter of 100-600 nm and displayed improved anti-felting performance after treatment with 100% ethanol.The optimal fibroin content for Cu 2+ adsorption was 80%, leading to a maximum adsorption capability of 22.8 mg/g.This high value manifested a synthetic effect between SF and CA during Cu 2+ adsorption.Particularly, in another study, SC nanocomposites were fabricated to visually demonstrate the degree of metal ions adsorbed by sericin [96].Anthocyanin is a natural pigment and its color changes when interacting with certain metal ions [90,182].Using Zn 2+ and Al 3+ as metal ion models, it was observed that both the SC solution and the filter film coated with SC nanocomposites exhibited a gradual change in color from pink to blue (Zn 2+ ) and violet (Al 3+ ) as the concentration of Zn 2+ and Al 3+ increased.The ultraviolet and visible (UV-Vis) adsorption of SC solution exhibited a redshift with increasing metal ion concentration.The change in color of SC solutions and their redshift of UV-Vis adsorption indicated that sericin reacted with metal ions first, followed by anthocyanin once sericin was saturated.The visual color difference occurring at 100 mM Zn 2+ and 0.1 mM Al 3+ suggested that SC nanocomposites reached saturation for Zn 2+ or Al 3+ adsorption at these concentrations.Furthermore, the adsorption capability of the filter film was significantly improved by the SC nanocomposite coating, with an increased removal efficiency from 22.22% to 93.16% for Zn 2+ and from 10.46% to 53.97% for Al 3+ .
Apart from Pb 2+ , Cd 2+ , Hg 2+ , and Cu 2+ , Cr 6+ is another representative toxic heavy metal ion produced by chemical-intensive industries, and the adsorption capability of sericinbased structures has been explored.For example, a chitosan/sericin conjugate demonstrated maximum adsorption capabilities for Cr 6+ and methyl orange dye up to 139 and 385 mg/g, respectively, under specific operation conditions [36].Cr 6+ was likely immobilized by chitosan/sericin conjugate through electrostatic interaction and reduced to Cr 3+ (an oxidation state of Cr with 100-1000 times less toxicity than Cr 6+ [183]) during the adsorption process.Furthermore, the adsorption capabilities were highly pH dependent.Similarly, sericin/lignin particles prepared by coagulation exhibited a higher Cr 6+ adsorption capability than sericin particles alone [97].The maximum adsorption capability occurred at a sericin-to-lignin ratio of 50:50 (w/w) and followed the Freundlich isotherm.In addition, the recovery of >90% of the adsorbed Cr 6+ by sericin/lignin particles was achieved in a 1 M NaOH solution.The adsorption-desorption process remained stable for over seven cycles, with a recycling efficiency of 82%.Another sericin-based material, ethanol-precipitated silk sericin was prepared by the electrospinning approach and exhibited a higher Cr 6+ adsorption capability than sericin macroparticles [93].The intra-particle diffusion model simulation indicated that the Cr 6+ adsorption process roughly involved three stages: instantaneous external surface adsorption, intraparticle diffusion, and near equilibrium.

Silk-Based Biosensing Materials
The use of silk or its derivatives as templates for the synthesis of biosensing materials (e.g., metal NCs) has recently gained increasing interest from researchers for several reasons [46,[184][185][186][187][188].First, silk proteins share common features with often-used protein or peptide templates, such as bovine serum albumin and transferrin [189]).These features involve the possession of abundant functional groups (like -S-, -OH, and -COOH) that can chelate with metal ions, endowing the proteins with an affinity for metal ions and the ability to immobilize on supports [190].Additionally, silk proteins contain tyrosine and tryptophan, which exhibit reducibility in strong alkaline environments and can reduce metal ions to atoms [191].Second, silk demonstrates excellent biocompatibility, controllable biodegradability, and outstanding processability [192][193][194].Third, as a natural protein fiber, silk fibers are inexpensive compared to synthetic protein fibers and have a simple molecular design [107,195,196].The practicability of silk-based biosensing materials in biomedical and non-biomedical fields has been widely studied.

Silk/Noble Metal Nanostructure Composites and In Vivo Micro Monitors
Silk-based biomaterials, consisting of silk proteins and other non-immunogenic materials, can be used for biolabeling, bioimage, and real-time, sensitive in vivo monitoring of analytes in body fluids to realize safer medical treatment and healthcare.Much attention from medical academia has been paid to it [197].

Silk-Based Biosensing Materials
The use of silk or its derivatives as templates for the synthesis of biosensing materials (e.g., metal NCs) has recently gained increasing interest from researchers for several reasons [46,[184][185][186][187][188].First, silk proteins share common features with often-used protein or peptide templates, such as bovine serum albumin and transferrin [189]).These features involve the possession of abundant functional groups (like -S-, -OH, and -COOH) that can chelate with metal ions, endowing the proteins with an affinity for metal ions and the ability to immobilize on supports [190].Additionally, silk proteins contain tyrosine and tryptophan, which exhibit reducibility in strong alkaline environments and can reduce metal ions to atoms [191].Second, silk demonstrates excellent biocompatibility, controllable biodegradability, and outstanding processability [192][193][194].Third, as a natural protein fiber, silk fibers are inexpensive compared to synthetic protein fibers and have a simple molecular design [107,195,196].The practicability of silk-based biosensing materials in biomedical and non-biomedical fields has been widely studied.

Silk/Noble Metal Nanostructure Composites and In Vivo Micro Monitors
Silk-based biomaterials, consisting of silk proteins and other non-immunogenic materials, can be used for biolabeling, bioimage, and real-time, sensitive in vivo monitoring of analytes in body fluids to realize safer medical treatment and healthcare.Much attention from medical academia has been paid to it [197].
Due to its distinctive optical properties, low cytotoxicity, and small size, the noble metal NC has been a hot spot of research, and its synthesis with biocompatible silk as a template has been studied recently [46,47,198].For instance, luminescent gold silk was prepared using an in situ method, wherein the silk's surface was coated with luminescent AuNCs [198].Compared with pristine silk, the gold silk possessed better optical properties, including longwavelength fluorescence (red), enhanced fluorescence stability (no photobleaching after 30-min UV irradiation), an extended fluorescence lifetime (322 ns), and a larger quantum yield (8%).Additionally, golden silk displayed better mechanical properties, an inhibitory effect on UV light, and high biocompatibility.The X-ray photoelectron spectroscopy measurement revealed that AuNCs combined with silk via Au-S bonds.These results indicated that silk coated with luminescent AuNCs was a promising material for both the textile and biomedical industries, including biosensing, bioimaging, cell adhesion, and tissue engineering.In another study, the in situ growth of AgNCs on SF fibers modified by poly-acrylic acid (PAA) was realized [47].The in situ synthesis, based on silk fibers, avoided the excessive surface modification and reductant procedures of the synthesis based on bulk materials.Because PAA had abundant carboxylic acid, the binding of Ag + to the surface of SF fibers was achieved through the exchange with H + .Upon exposure to UV light, silver ions were reduced to silver atoms.The prepared SF/AgNCs were proved to be luminescent through UV-Vis adsorption and fluorescent emission measurements.Its emission bond was approximately 550 nm, attributed to Ag 2 -Ag 8 .Furthermore, the antimicrobial ability of SF/AgNCs against Staphylococcus aureus and Escherichia coli was demonstrated.The results indicated that SF/AgNCs could be used for biolabeling, specialized fabrics, biosensing, and antimicrobial materials.Similarly, the floriated AgNCs were synthesized using SF fibers as a biotemplate, reductant, and support, at room temperature [46].The hierarchical morphology of SF fibers provided a large loading surface area and highly uniform metal loading for AgNCs.This study manifested that the SF fiber is a felicitous solid support for in situ synthesizing metal NCs via mild reactions.
In addition to synthesizing noble metal NCs with outstanding optical quality, the fabrication of biosensors and bio-probes was realized for in vivo activity and analyte levels (like biopotential [199], glucose [200], O 2 [148], and antigens [201]), where the silk proteins serve as substrates/superstrates, protective layers, and insulators.Some examples are detailed as follows.A nontransient SF-based bio-interface was fabricated for directly recording various in vivo electrical activity [199].The study used water-stable SF as a substrate and superstrate to support the electrode construct and was enabled by two key novel concepts: SILK-SEAL (a silk sandwich sensor) and QUICK-SILK (a band-aid to 'paste' the silk devices onto tissue surfaces).The obtained film devices achieved biopotential recordings from the peripheral nerve and the cortex in a rodent stroke model, indicating that the silk sensors could be used as non-dissolvable bio-interfaces in preclinical studies.A biocompatible, cost-effective, and chemically tunable metal-insulator-metal resonator was designed for color filters and superabsorbers using SF and Ag [202].Results showed that the silk metal-insulator-metal resonator had comparable transmission, adsorption, and quality factor performances to nanostructured plasmonic devices.The absorptive features could be detected even through 1.95 mm thick biological tissue in the first optical window in the tissues (700-900 nm), indicating that this silk resonator could achieve highly sensitive, real-time, and in vivo monitoring for analytes in body fluid.
Further, detecting specific analytes in body fluids using biocompatible devices has been investigated.A flexible biocompatible glucose biosensor chip was fabricated using natural SF as substrate and biocompatible silicone rubber as an encapsulating material (Figure 7A-C) [203].The Pt working and counter electrodes of the sensor chip were fabricated using thin-film technology, while its Ag/AgCl quasi-reference electrode was fabricated using thick-film technology.The biocompatible glucose biosensor chip had a mean glucose sensitivity of 0.24 ± 0.006 µA/mM in pure PBS, 0.26 ± 0.02 µA/mM in the PBS, to which low-concentration ascorbic acid, noradrenaline, and adrenaline were subsequently spiked, and 0.16 ± 0.01 µA/mM in pure Rigner's solution (pH 7.4), indicating that the biosensor chip exhibited an acceptable sensitivity and great application potential in real blood samples.In another study, SF and a chromophore, Pd 2+ tetramethacrylated benzoporphyrin (PdBMAP), were used to synthesize a silk/chromophore composite to develop a practical subcutaneous oxygen sensing platform (Figure 7D-G) [148].The results showed that β-sheet proteins formed a network through physical crosslink, entrapping and stabilizing PdBMAP.In vivo experiments using three physical states (hyperoxia, normoxia, and hypoxia) proved that the silk/chromophore composite films were suitable for real-time continuous oxygen sensing.This study suggests that silk is an auspicious alternative as a host substrate in implantable and physiological sensing.An aptasensor based on TiO 2 NPs and an SF composite as the probe oligonucleotide platform was fabricated for prostate-specific antigens [201].The aptasensor had a high selectivity for prostate-specific antigens over bovine serum and lysozyme, and satisfactory reproducibility and stability.The response after it was stored in phosphate buffer for seven days retained 94% of its initial response.The aptasensor detected the prostate-specific antigen in serum real solutions successfully.Moreover, the carbonized silk/AuNPs patch for sweat non-invasive urea detection was fabricated via two steps [204]: First, Au NPs were deposited by heating, during which the tyrosine of silk as a self-reducing agent, and had a conductivity in the range of semiconductivity (795 ± 54) × 10 −6 S/cm.The silk/AuNPs patch was then carbonized.When used as the working electrode of an electrochemical sensor for sweat urea, the carbonized silk/AuNPs patch had a detection range of 0-100 mM with a limit of 20 mM.When used as bioship laser desorption/ionization mass spectrometry (LDI-MS), the silk/AuNPs patch had a detection limit of 8 mM, enabling us to distinguish between normal individuals and kidney prone patients.
Sustainability 2023, 15, x FOR PEER REVIEW 19 of 37 spiked, and 0.16 ± 0.01 µA/mM in pure Rigner's solution (pH 7.4), indicating that the biosensor chip exhibited an acceptable sensitivity and great application potential in real blood samples.In another study, SF and a chromophore, Pd 2+ tetramethacrylated benzoporphyrin (PdBMAP), were used to synthesize a silk/chromophore composite to develop a practical subcutaneous oxygen sensing platform (Figure 7D-G) [148].The results showed that β-sheet proteins formed a network through physical crosslink, entrapping and stabilizing PdBMAP.In vivo experiments using three physical states (hyperoxia, normoxia, and hypoxia) proved that the silk/chromophore composite films were suitable for real-time continuous oxygen sensing.This study suggests that silk is an auspicious alternative as a host substrate in implantable and physiological sensing.An aptasensor based on TiO2 NPs and an SF composite as the probe oligonucleotide platform was fabricated for prostate-specific antigens [201].The aptasensor had a high selectivity for prostate-specific antigens over bovine serum and lysozyme, and satisfactory reproducibility and stability.The response after it was stored in phosphate buffer for seven days retained 94% of its initial response.The aptasensor detected the prostate-specific antigen in serum real solutions successfully.Moreover, the carbonized silk/AuNPs patch for sweat non-invasive urea detection was fabricated via two steps [204]: First, Au NPs were deposited by heating, during which the tyrosine of silk as a self-reducing agent, and had a conductivity in the range of semiconductivity (795 ± 54) × 10 −6 S/cm.The silk/AuNPs patch was then carbonized.When used as the working electrode of an electrochemical sensor for sweat urea, the carbonized silk/AuNPs patch had a detection range of 0-100 mM with a limit of 20 mM.When used as bioship laser desorption/ionization mass spectrometry (LDI-MS), the silk/AuNPs patch had a detection limit of 8 mM, enabling us to distinguish between normal individuals and kidney prone patients.In addition to silk/noble metal nanoparticle composites and in vivo micro monitor for biomedicine, silk/metal composites can also be used for physical and chemical detection.Good flexibility enables the material to withdraw various deformations, such as bending, which is vital for creating optoelectronic and biomimetic devices [205].Silk/metal composites, with excellent flexibility and optical and optoelectronic properties, have been used to develop consumer electronics for food and environment quality monitoring and personal healthcare.
A highly flexible electronic textile sensor was fabricated using the functionalized silk fiber coiled yarns from carbon nanotubes, Ag nanowires, and ionic liquid [EMIM]Tf 2 N (Figure 8A-D) [206].The fabricated textile had an extremely high sensitivity (1.23%/ • C) and stability compared with other sensors in temperature sensing [207][208][209].Based on the capacitance change of each cross-point of two yarns, the pressure sensing function of the sensor was achieved and very position-dependent, with a sensitivity of 0.136/kPa.Furthermore, a special textile that could sense temperature and pressure with a position precision of 1 mm 2 was fabricated and successfully employed to produce intelligent gloves with capabilities of sensing temperature and weight distributions.In one study, the SFcapped copper NCs (SF/CuNCs) were synthesized using Cu(NO 3 ) 2 •3H 2 O and SF [187].The SF/CuNCs exhibited monodispersion and higher sensitivity and selectivity to S 2− over various metal ions, anions, and micromolecules.Their practicability as fluorescent nanosensors for detecting S 2− was demonstrated in tap and river water samples.SF/CuNCs had a valence between 0 and +1, which confirmed SF served as a protective agent and a reducing agent during synthesis and was consistent with previous studies [188,192].Like the study in [206], a noble metal Au NP as a functional component and silk as a substrate was used for designing a wireless passive antenna (Figure 8E) [210].The antenna was conformal and could adhere to curved surfaces tightly.The antenna, with biodegradable and edible components, was demonstrated as a sensor for food quality change by monitoring the ripening process of apples and bananas and the spoilage process of cheese and milk.
Aside from metal ions, silk proteins can also combine with natural nonmetallic materials to form biosensing composites.For instance, silk protein/anthocyanin composites can be used to detect metal ions in aqueous solutions and show the saturation state of metal ion adsorption by the composite [96,[211][212][213].This is because anthocyanin, a natural water-soluble pigment, exhibits significant color changes upon interaction with metal ions.Owing to the stronger interaction between silk proteins and metal ions compared to anthocyanin, the silk protein component in the composite preferentially combines with metal ions, thereby protecting the anthocyanin [73,90,96,214].In one study, sericin/anthocyanin nanocomposites were fabricated to enhance the physicochemical stability of anthocyanin [90].The results showed that the retention ratio of anthocyanin in the composite increased significantly, from 33% to 97.93%, in Cu 2+ solution after 6 h incubation.Another study showed that the sericin/anthocyanin solution and filter film exhibited a gradual color change from pink to blue in response to varying Zn 2+ concentrations, with a visually discernable difference at 100 mM Zn 2+ .For Al 3+ , the color changed from pink to purple, and the visually noticeable difference occurred at 0.1 mM Al 3+ (Figure 2B) [96].These studies manifest that sericin was an appropriate choice for fabricating biosafe and effective metal ion detection instruments, with potential applications in chemical and biological analysis.

Silk-Based Electrochemical Materials
Aside from biosensing use, silk/metal composites show an increasing application in electrochemistry, especially in electrocatalysis and energy storage for power supply, owing to the strong binding between silk proteins and metals and the outstanding properties of silk materials mainly including good flexibility, degradability, and biocompatibility that imparts silk/metal composites with the properties of conductive materials and various application forms [154,215].

Energy-Storage Materials for Power Supply
The interaction of silk proteins with metal ions endows them with excellent electrochemical and electroconductive properties.Accordingly, they are used to make micro energy-storing devices to supply power to implantable devices, wearable smart electronics, etc. [216][217][218].
In silk-based energy storage devices, the degradable micro battery has captured the most attention of researchers.As natural proteins with exceptional processibility, silk proteins in these micro batteries are used as substrates, encapsulation coatings, insulating spacers, or functional components of all-solid-state electrolytes and electrodes [219][220][221][222]. Specifically, a sandwich-structured garnet Li 7 La 3 Zr 2 O 12 (LLZO) ceramic fabric composite solid electrolyte (LLZO CF-CSE) was fabricated by using silk as a template (Figure 9A) [223].The LLZO CF-CSE exhibited remarkable electrochemical stability (wide electrochemical short window of 5.1 V vs. Li + /Li) and thermostability.The lithium metal battery prepared using LLZO CF-CSE could stably run with a short circuit for 700 h at 50 • C. The allsolid-state lithium battery Li|LLZO CF-CSE|LiFePO 4 had high reversible capacity and excellent cycle stability.Its specific capacity was 149.3 mAh/g after 100 cycles at 0.2 • C, and 107.2 mAh/g after 500 cycles at 0.1 • C. Furthermore, silk proteins have been a popular component for transient implantable energy devices [55,217].For instance, a biodegradable ion-conducting membrane was designed by immobilizing a biocompatible ionic liquid (choline nitrate, [Ch][NO 3 ]) in silk (Figure 9B,C) [55].By using this membrane as an electrolyte, a biodegradable thin-film Mg battery was fabricated, which used Au-SF as its cathode and AZ31-SF as its anode, and was encapsulated by silk.Results showed that the designed polymer electrolyte [SF-[Ch][NO 3 ]] (1:3)] had an ionic conductivity of 3.4 Sm/cm and a two-day degradation profile.The encapsulated thin-film battery had a capacity of 0.06 mAh/cm 2 at a current density of 10 µA/cm 2 and a degradation profile of 45 days.Additionally, the dendrite formation precludes the reversible cycle in lithium-ion metal batteries [224,225].However, a Ni/silk/Li anode, fabricated using a flexible Ni/silk fiber and Li metals, could reduce the wanton formation of lithium dendrites by inducing uniform Li deposition (Figure 9D) [226].The flexible Ni/silk fiber was prepared using the catalyzer Ni particles to graphitize silk fibers.The results showed that the Ni/silk/Li anode exhibited better electrochemical performances than the silk-Li anode.It had a longer lifespan of 800 h, an overpotential of 23.5 mV, and a high coulombic efficiency of 98.35% for the half cells.These properties manifested that the Ni/silk/Li anode enabled the mitigation of dendrite formation.The prevention of lithium dendrites by silk-based materials also has been demonstrated in other studies [227][228][229][230].
In addition to micro batteries, the silk proteins also have been applied in flexible supercapacitors [231][232][233][234].In a study, silk textile is directly carbonized to make a conductive free-standing substrate for preparing low-cost, flexible, tough, and up-scalable supercapacitor electrodes [216].The results showed that the prepared electrode's areal capacitance was 362 mF/cm 2 , clearly greater than that of the MXene-based flexible electrodes.The cyclic voltammogram (CV) test with up to 10,000 cycles demonstrated the prepared electrodes also had outstanding stability.The CV curves of the supercapacitor made from carbonized silk cloth and Ti 3 C 2 T x changed a little under bending at 120 • , indicating the Ti 3 C 2 T x was tightly coated on carbonized silk cloth.Likewise, a hydrogen electrode was created by stimulating the collagen fiber network and proteoglycan in cartilage using a silk nanofiber network and polyvinyl alcohol [235].The supercapacitor had the highest capacitance (13.62 F/cm 2 ) among the currently reported polyvinyl alcohol capacitors and an energy density of 1.2098 mWh/cm 2 , owing to the effective connection between the silk nanofiber network and carbon nanotubes.Overall, using silk-based materials imparts higher capacitance and resilience to capacitors.In addition to micro batteries, the silk proteins also have been applied in flexible su percapacitors [231][232][233][234].In a study, silk textile is directly carbonized to make a conductive free-standing substrate for preparing low-cost, flexible, tough, and up-scalable superca pacitor electrodes [216].The results showed that the prepared electrode's areal capaci tance was 362 mF/cm 2 , clearly greater than that of the MXene-based flexible electrodes The cyclic voltammogram (CV) test with up to 10,000 cycles demonstrated the prepared electrodes also had outstanding stability.The CV curves of the supercapacitor made from carbonized silk cloth and Ti3C2Tx changed a little under bending at 120°, indicating the Ti3C2Tx was tightly coated on carbonized silk cloth.Likewise, a hydrogen electrode wa created by stimulating the collagen fiber network and proteoglycan in cartilage using a

Carbon-Based Electrocatalytic Composites
Silk/metal composites with catalytic activity also have been studied [236,237].The advantages of SF for constructing catalytic components are attributed to its elemental composition and molecular structure [238].First, the SF molecule is rich in C, O, N, and S atoms; accordingly, they can act as precursors for fabricating heteroatom-doped carbon, especially N-doped carbon.Second, the SF's amino acids have special spatial effects and strong chelation with metal ions, which are beneficial to the formation of enhanced active sites, smaller particle sizes, and an enhanced dispersity of active particles.Therefore, SF molecules are superior catalyst carriers.Third, the SF's structures facilitate the fabrication of porous carbon nanomaterials, which have better geometry, high surface area, and heat transfer properties, and then enhance the heat and electron transfers in catalysis.Rapid and environmentally friendly synthesis of flower-like gold nanoparticles/reduced graphene oxide (Au NPs/RGO) composites was achieved using regenerated silk fibroin (RSF) (Figure 10A) [239].RSF was obtained by breaking the hydrogen bonds in SF and dissolving it in water.RSF could be easily and tightly absorbed onto the RGO surface owing to the formation of hydrogen bonds and π-π stacking between them.Meanwhile, it could absorb metal NPs because -COOH and -NH 2 groups provided binding sites for nucleation.In other words.RSF served as an adhesive, connecting RGO and Au NPs to form flowerlike Au NPs/RGO.The electrochemical experiment showed that the flower-like Au NPs/RGO composites exhibited better catalytic performance for ORR than branched Au NPs/RGO composites and spherical Au (I, II) NPs/RGO composites [239].In contrast to using noble metals, novel nitrogen (N) and trace iron (Fe) co-doped 3D porous carbon (NFe x -C) was synthesized as an excellent ORR catalyst from a salt-induced silk gel (Figure 10B) [240].The salt-induced silk gel spontaneously improved the porosity and boosted the ORR activity.The cyclic voltammetry and linear sweep voltammetry tests showed that NFe x -C had a remarkably higher positive initial potential (0.274 V vs. Ag/AgCl) and half-wave potential (E 1/2 ) (0.095 V vs. Ag/AgCl) than commercial Pt/C catalysts.In the same year, 2D porous carbon nanosheets with atomically-dispersed Fe-N x -C active sites and very large specific surface areas (about 2105 m 2 /g) were created through dissolving RSF in FeCl 3 and ZnCl 2 aqueous solution and thermal treatment (Figure 10C) [241].The obtained silk-driven carbon nanosheets demonstrated excellent electrochemical properties to ORR with a half-potential of 0.853 V and outstanding stability with just 11 mV loss in E 1/2 after 30,000 cycles, and also good catalytic activity to OER.By contrast, nanoscale nickel-cobalt-iron (NiCoFe) alloys were anchored in boron (B) and nitrogen (N) co-doped SF carbon aerogel to synthesize a specialized OER electrocatalyst [242].The optimized electrocatalyst (BN/CA-NiCoFe-600) possessed low overpotential (321 mV at a current density of 10 mA/cm 2 ), low Tafel slope (42 mV/dec), and superior stability and durability.The electron and heat transfer were improved by the SF aerogel.Other SF-derived carbon aerogels anchored with metal ions have been created as electrocatalysts for OER [57], HER [57,236,243], and CO 2 -to-CO conversion [244].The above research demonstrates the applicability of silk proteins as precursors to design efficient and cost-effective electrochemical catalysts.

Conclusions
As one of the most popular natural fibers, silk produced by the Bombyx mori L. silk worm, silk's applications have been extended from traditional textiles to the environmen tal protection field and advanced biomaterials.Silk is composed of SF and sericin.Thes two silk proteins process many polar functional groups including carboxyl, hydroxy amino group, and amide group, enabling strong adsorption of silk proteins to metal ions Based on this adsorption, plus the outstanding properties including biocompatibility, bi odegradability, and processability, silk's performance can not only be modified but als can be used to protect the environment and can be combined with metal nanostructure

Conclusions
As one of the most popular natural fibers, silk produced by the Bombyx mori L. silkworm, silk's applications have been extended from traditional textiles to the environmental protection field and advanced biomaterials.Silk is composed of SF and sericin.These two silk proteins process many polar functional groups including carboxyl, hydroxyl, amino group, and amide group, enabling strong adsorption of silk proteins to metal ions.Based on this adsorption, plus the outstanding properties including biocompatibility, biodegradability, and processability, silk's performance can not only be modified but also can be used to protect the environment and can be combined with metal nanostructures to prepare advanced biomaterials.Regarding performance optimization, silk's mechanical performance, flame retardancy, and color fastness can be enhanced through binding with some metal ions, making silk meet today's new expectations for textiles.For environmental protection, SF and sericin can be used alone or combined with other natural or synthetic polymers to fabricate environmentally sound and efficient adsorbent materials generally in the form of film and particle.Concerning advanced biomaterial, silk proteins can be combined with metal ions to form biosensing materials and electrocatalytic materials, and during most of the combinations, the metal ions are reduced to zero-value metal atoms.In biosensing materials, the silk/noble metal nanostructure composites can be used to produce in vivo micro materials due to their biocompatibility, while silk/base metal composites are promising for smart environmental and health consumer electronics.The electrochemical materials include energy-storage materials to supply power to implantable devices and carbon-based electrocatalytic composites.The review indicates that these novel applications of silk proteins, based on their interactions with metal ions, shed light on further study of the property modification and the potential use in other fields of silk proteins and similar natural polymers.

Sustainability 2023 , 37 Figure 1 .
Figure 1.(A) Silk components.The silk cocoon is made of silk fibers spun by silkworms.The silk fiber consists of SF and sericin.(B) Schematic of H-chain.H-chain has four different domains: crystalline domain, amorphous domain, N-terminal, and C-terminal.H-chain and L-chain are connected by a disulfide bond at the H-chain's C-terminal.(C) Amino acid sequence of the crystalline domain.It includes several repetitive polypeptide segments, mainly including GAGAGS, GAGAGY (or GA-GAGVGY), and GAGAGSGAAS.

Figure 1 .
Figure 1.(A) Silk components.The silk cocoon is made of silk fibers spun by silkworms.The silk fiber consists of SF and sericin.(B) Schematic of H-chain.H-chain has four different domains: crystalline domain, amorphous domain, N-terminal, and C-terminal.H-chain and L-chain are connected by a disulfide bond at the H-chain's C-terminal.(C) Amino acid sequence of the crystalline domain.It includes several repetitive polypeptide segments, mainly including GAGAGS, GAGAGY (or GAGAGVGY), and GAGAGSGAAS.

Figure 2 .Figure 2 .
Figure 2. (A) Sericin/metal complex between metal ions and sericin's active amino groups.Adapted with permission from Ref. [83].Copyright 2014, Elsevier.(B) Binding between sericin/anthocyanin (SC) nanocomplex and Zn 2+ and Al 3+ .Due to anthocyanin's different color changes after chelating with different metal ions, anthocyanin is a suitable indicator for the saturation state of adsorptionFigure 2. (A) Sericin/metal complex between metal ions and sericin's active amino groups.Adapted with permission from ref. [83].Copyright 2014, Elsevier.(B) Binding between sericin/anthocyanin (SC) nanocomplex and Zn 2+ and Al 3+ .Due to anthocyanin's different color changes after chelating with different metal ions, anthocyanin is a suitable indicator for the saturation state of adsorption for the filter membrane.Adapted with permission from ref. [96].Copyright 2022, The Royal Society of Chemistry.(C) Potential protonation and deprotonation processes at acidic and alkaline pH of sericin.Both protonation and deprotonation are assumed to occur at active amino groups.Adapted with permission from ref. [83].Copyright 2014, Elsevier.

37 Figure 3 .
Figure 3. (A) Possible interactions between the chitosan/sericin conjugate and methyl orange dye and Cr 6+ ions, and reduction of Cr 6+ to Cr 3+ .Hydrophobic interactions are represented by ") (", electrostatic" is represented by the green dashed line.(B) Influence of pH on the coadsorption of Cr 6+ ions and methyl orange dye using a chitosan/sericin conjugate.Adapted with permission from Ref. [36].Copyright 2018, The Royal Society of Chemistry.(C) (c.1,c.2) Field emission scanning electron microscopy (FE-SEM) images of sericin/kraft lignin beads after Cr 6+ adsorption.(c.3) Kinetics curves of Cr 6+ adsorption by sericin/kraft lignin blend beads at 293, 303, 313, and 323 K. Adapted with permission from Ref. [97].Copyright 2016, Kwak et al. (D) (d.1) SEM images showing the unique growth of uniformly distributed needle-shaped nanowires with an initial Pb 2+ concentration of 15 mg/L.(d.2) Scanning transmission electron microscopy-energy dispersive X-ray spectroscopy (STEM-EDX) mapping indicates the formation of Pb nanowires (Green, Cu; Red, Pb).(d.3) Adsorption rate showing the selective adsorption of Pb 2+ in the presence of Ca 2+ ions.(C and C0 are the metal ion concentrations before and after adsorption).Adapted with permission from Ref. [105].Copyright 2016, American Chemical Society.

Figure 3 .
Figure 3. (A) Possible interactions between the chitosan/sericin conjugate and methyl orange dye and Cr 6+ ions, and reduction of Cr 6+ to Cr 3+ .Hydrophobic interactions are represented by ") (", "electrostatic" is represented by the green dashed line.(B) Influence of pH on the coadsorption of Cr 6+ ions and methyl orange dye using a chitosan/sericin conjugate.Adapted with permission from ref. [36].Copyright 2018, The Royal Society of Chemistry.(C) (c.1,c.2) Field emission scanning electron microscopy (FE-SEM) images of sericin/kraft lignin beads after Cr 6+ adsorption.(c.3) Kinetics curves of Cr 6+ adsorption by sericin/kraft lignin blend beads at 293, 303, 313, and 323 K. Adapted with permission from ref. [97].Copyright 2016, Kwak et al. (D) (d.1) SEM images showing the unique growth of uniformly distributed needle-shaped nanowires with an initial Pb 2+ concentration of 15 mg/L.(d.2) Scanning transmission electron microscopy-energy dispersive X-ray spectroscopy (STEM-EDX) mapping indicates the formation of Pb nanowires (Green, Cu; Red, Pb).(d.3) Adsorption rate showing the selective adsorption of Pb 2+ in the presence of Ca 2+ ions.(C and C 0 are the metal ion concentrations before and after adsorption).Adapted with permission from ref.[105].Copyright 2016, American Chemical Society.

Figure 4 .
Figure 4. (A) Red fluorescence only detected in the anterior silk gland of BmCP231 (an anterior silk gland-specific promoter) transgenic silkworm under a red fluorescent protein-excitation wavelength light.Schematic of ion transportation from silks to gland cells, and a comparison of the stress-strain of Over-NKA (red), Over-SERCA (green) and WT (blue) silk fibers (NKA and SERCA are the silkworm's Na + /K + -ATPase α subunit (BmNKAα) and endoplasmic reticulum Ca 2+ -ATPase, respectively, and WT is wild-type).Adapted with permission from ref. [16].Copyright 2015, American Chemical Society.(B) Schematic illustration of the sonicating liquid metal in the alginate solution and the liquid metal nanodroplets shelled in the alginate microgel.(C) Transmission electron microscopy (TEM) image of the LM/NaAlg nanodroplets.(D) (d.1,d.2) Photographs of the mature larvae fed with control diet and LM/NaAlg-2 diet, respectively.(d.3,d.4)SEM images showing the morphology of the degummed silk fibers and the cocoons of the mature larvae fed with the control diet and LM/NaAlg-2 diet, respectively.Adapted with permission from ref. [156].Copyright 2022, Gao et al.

Figure 5 .
Figure 5. (A) Images of the treated silk fabrics and the SEM images of silk char residues after vertical burning.Adapted with permission from Ref. [18].Copyright 2020, Elsevier.(B) Flame-retardant mechanism of CPP-metal ions treated silk fabrics.(C) Colorimetric characteristics of silk fabrics treated with 10 g/L CPP and 4 g/L metal salts.(D) Morphological structures of charred products from vertical burning.Adapted with permission from Ref. [164].Copyright 2019, Elsevier.

Figure 5 .
Figure 5. (A) Images of the treated silk fabrics and the SEM images of silk char residues after vertical burning.Adapted with permission from ref. [18].Copyright 2020, Elsevier.(B) Flame-retardant mechanism of CPP-metal ions treated silk fabrics.(C) Colorimetric characteristics of silk fabrics treated with 10 g/L CPP and 4 g/L metal salts.(D) Morphological structures of charred products from vertical burning.Adapted with permission from ref. [164].Copyright 2019, Elsevier.

Figure 7 .
Figure 7. Schematic exploded-view illustration of the construction of a flexible silk electrode array for electroneurograms (A) and micro-electrocorticograms (B) measurements.(C) Photograph of a two-channel silk electrode array deployed as a band-aid on the sciatic nerve of a rat.The diameter is about 600 µm.Adapted with permission from Ref. [203].Copyright 2021, Elsevier.(D) Schematic diagram of the continuous oxygen monitoring platform by the phosphorescent silk/chromophore

Figure 7 .
Figure 7. Schematic exploded-view illustration of the construction of a flexible silk electrode array for electroneurograms (A) and micro-electrocorticograms (B) measurements.(C) Photograph of a two-channel silk electrode array deployed as a band-aid on the sciatic nerve of a rat.The diameter is about 600 µm.Adapted with permission from ref. [203].Copyright 2021, Elsevier.(D) Schematic diagram of the continuous oxygen monitoring platform by the phosphorescent silk/chromophore composite film.(E) Schematic outlining the silk/chromophore film production.(F) Implantation of the silk/chromophore composite film on the back of the animal and its silk/chromophore composite film after 3, 7, 14, and 28 days.(G) Integration of the film into the tissue after 7 days.Adapted with permission from ref. [148].Copyright 2022, Wiley-VCH GmbH.

Figure 8 .
Figure 8. Schematic of the strategy for the fabrication of silk fibers-wrapped combo temperaturepressure sensors: (A) Coiling supporting yarns by silkworm silk fibers.(B) Coating the silk fiber coiled yarns with temperature or pressure sensing materials (Ag nanowires for pressure sensing, and the mixture of carbon nanotube and an ionic liquid for temperature sensing) and coating the protection or dielectric layers on the functional yarns/fibrous sensors.(C) Photographs of the smart gloves with the textile-based pressure and temperature sensors at the ends of four fingers.(D) Schematic illustration and image of placing a cup of hot water on the multimode sensing textile (scale bar = 5 mm) and the position-related 3D temperature and pressure sensing: the temperature and pressure distributions of the cup on the combo sensing textile in terms of the relative resistance and capacitance changes, respectively.Adapted with permission from Ref. [206].Copyright 2019, Wiley-VCH GmbH.(E) Schematic of steps for rapid transfer of silk antennas onto curved substrates.(1) Water vapor is applied to the back of non-crystalline functionalized silk films, yielding (2) a functionalized film in which the back surface of the film has been partially melted.(3) This melted surface is conformally applied to arbitrary surfaces, yielding (4) applied functional sensors on a variety of surfaces.Adapted with permission from Ref. [210].Copyright 2012, Wiley-VCH GmbH.

Figure 8 .
Figure 8. Schematic of the strategy for the fabrication of silk fibers-wrapped combo temperature-pressure sensors: (A) Coiling supporting yarns by silkworm silk fibers.(B) Coating the silk fiber coiled yarns with temperature or pressure sensing materials (Ag nanowires for pressure sensing, and the mixture of carbon nanotube and an ionic liquid for temperature sensing) and coating the protection or dielectric layers on the functional yarns/fibrous sensors.(C) Photographs of the smart gloves with the textile-based pressure and temperature sensors at the ends of four fingers.(D) Schematic illustration and image of placing a cup of hot water on the multimode sensing textile (scale bar = 5 mm) and the position-related 3D temperature and pressure sensing: the temperature and pressure distributions of the cup on the combo sensing textile in terms of the relative resistance and capacitance changes, respectively.Adapted with permission from ref. [206].Copyright 2019, Wiley-VCH GmbH.(E) Schematic of steps for rapid transfer of silk antennas onto curved substrates.(1) Water vapor is applied to the back of non-crystalline functionalized silk films, yielding (2) a functionalized film in which the back surface of the film has been partially melted.(3) This melted surface is conformally applied to arbitrary surfaces, yielding (4) applied functional sensors on a variety of surfaces.Adapted with permission from ref. [210].Copyright 2012, Wiley-VCH GmbH.

Figure 9 .
Figure 9. (A) Schematic of the preparation of the Li7La3Zr2O12 ceramic fabric composite solid elec trolyte (LLZOCF-CSE).Adapted with permission from Ref. [223].Copyright 2022, Elsevier.(B) Fab rication procedures and a digital image of a polymer electrolyte film (SF:[Ch][NO3], weight ratio o 1:3) and schematic of an encapsulated battery with a silk pocket.(C) Optical images demonstrating the biodegradation profile of an encapsulated battery (device size of 3.6 × 2.7 × 0.017 cm 3 ) in buffered protease solution at 37 °C.Adapted with permission from Ref. [55].Copyright 2017, American Chemical Society.(D) Scheme of Li plating process on the Ni/silk/Lithium anode.Adapted with permission from Ref. [226].Copyright 2023, Wiley-VCH GmbH.

Figure 9 .
Figure 9. (A) Schematic of the preparation of the Li 7 La 3 Zr 2 O 12 ceramic fabric composite solid electrolyte (LLZOCF-CSE).Adapted with permission from ref. [223].Copyright 2022, Elsevier.(B) Fabrication procedures and a digital image of a polymer electrolyte film (SF:[Ch][NO 3 ], weight ratio of 1:3) and schematic of an encapsulated battery with a silk pocket.(C) Optical images demonstrating the biodegradation profile of an encapsulated battery (device size of 3.6 × 2.7 × 0.017 cm 3 ) in buffered protease solution at 37 • C. Adapted with permission from ref. [55].Copyright 2017, American Chemical Society.(D) Scheme of Li plating process on the Ni/silk/Lithium anode.Adapted with permission from ref. [226].Copyright 2023, Wiley-VCH GmbH.

Figure 10 .
Figure 10.(A) Schematic diagram of the procedure for the synthesis of flower-like Au/RGO composite.Adapted with permission from ref. [239].Copyright 2013, American Chemical Society.(B) The synthetic route of NFe x -C from a salt-induced silk gel: (1) silkworm cocoons, (2) the silkworm cocoon incubated in a water bath (58 • C), (3) the salt-induced silk gel precursor of NFe x -C, and (4) the achieved NFe x -C catalysts.Adapted with permission from ref. [240].Copyright 2019, The Royal Society of Chemistry.(C) Schematic illustration of the preparation process for porous carbon nanosheets with automatically-dispersed Fe-N x -C (Fe-SilkPNC).Adapted with permission from ref. [241].Copyright 2019, Wiley-VCH GmbH.

Table 1 .
Metal ions removal in aqueous solutions by employing silk protein-based biomaterials.
4.3.2.Silk/Base Metal Composite and Smart Environmental and Health Electronics