Life Cycle Assessment of Tomato Cultivated in an Innovative Soilless System

: The main goal of this study is to present the life cycle assessment results of an innovative closed-loop production system, called an agriponic system, used for producing tomatoes. In the study, this new system is presented, as well as its related environmental impacts generated for the production of the tomatoes. A life cycle assessment (according to ISO 14040) was applied to it, from seedling purchase and planting to harvest, using a functional unit of 1 ton of cherry tomatoes produced. SimaPro 9.3.0.3 software and the Ecoinvent database were used to analyze ﬁve impact categories. Plant growth emerged as the process unit with the highest impact, particularly for the ozone depletion potential (ODP), with a value of 0.00056 kgCFC-11eq, and for photochemical oxidation (POCP), with a value of 0.0784 kgC 2 H 4 eq impact categories. Greenhouse climate management presented a signiﬁcant impact to the acidiﬁcation potential (AP), with a value of 1.021 kgSO 2 eq. Conversely, the phases of plant transplanting, harvesting, and crop disposal had positive impacts for all impact categories considered in the study, because they were very low. In conclusion, agriponic greenhouse tomato production is a sustainable process. This is due to fewer pesticides that are used, and to nutrient solution reuse.


Introduction
The global population is growing, leading to a corresponding increase in the demand for food.According to literature, the demand for agricultural products from 2005 to 2050 will increase by 100% [1].The current systems for food production require large inputs of resources, presenting remarkable environmental impacts, and causing approximately 14% of global greenhouse gas emissions [2].As much as 70% of global freshwater consumption [3], extracted and used worldwide, is allocated to the water needs of the agricultural sector.Approximately 40% of the global land surface is used for agriculture [4].Every year, around 24 billion tons of fertile soil are lost due to intensive agricultural soil erosion [5].Roughly 20-30% of the total environmental impact per individual can be attributed to food production and consumption [6].Furthermore, with 66% of the world's population expected to live in cities by 2050, there has been an intensified push to modernize horticultural methods, in order to fulfill the demand from a population that is reaching close to 9 billion [7].All growers are under pressure from declining arable land, growing urbanization, water shortages, and climate change.Thus, the agricultural sector causes climate change but, in turn, suffers from its effects.Among the new challenges facing farms today, the sustainability of agricultural production cycles is undoubtedly the most important, orienting European consumers, and becoming a fundamental requirement for companies to access EU aid.
A life cycle assessment (LCA) is defined as a "compilation and evaluation of the inputs, outputs, and the potential environmental impacts of a product throughout its lifecycle", and is a methodology that was established and standardized by the International Organization for Standardization [8,9].It is used for calculating environmental impacts in a structured manner.Although the LCA was initially developed for industrial processes, it has found widespread application in various sectors, including agriculture and food production [10].Vegetable cropping systems exhibit a wide variety of agricultural-and production-related environmental factors that have a significant influence on the inventory, on related on-field estimating techniques, and on resulting LCA outcomes.
Tomatoes represent one of the most important agricultural crops on a global scale, with a cultivated area in 2021 of approximately 5.16 million hectares, and an estimated worldwide production of 189.1 million tons [11].Tomatoes are produced in the open field and in greenhouses.For fresh consumption, much of the production occurs inside greenhouses due to their longer production calendar, high yields, and good product quality.Inside greenhouses, cultivation is carried out in soil or in soilless systems, using artificial substrates.It is common for greenhouse cultivation to require higher energy inputs, such as heating or artificial lighting, in order to enhance production.
The environmental impacts associated with tomato cultivation arise from various components, including the infrastructure (greenhouses, irrigation systems, water supply, and other equipment), production processes (seed and seedling production, cultivation in soil, above ground, open cycle, closed cycle), and the means of production (substrates, fertilizers, pesticides, water) [17,19,22].Energy consumption is another significant factor that encompasses heating, cooling, lighting, and electricity requirements for automation, irrigation, and other purposes [23][24][25][26][27][28][29].Lastly, waste management practices also play a role in the overall environmental impacts of tomato cultivation [21].
The production capacity of a greenhouse tomato plant is an important factor in the assessment of the impacts of cultivation.In fact, the environmental impact should be related not to the unit of area, but to the unit of product (how much energy is used to produce 1 kg of tomatoes) [30].
The identification of key areas for improvement, such as the optimization of water and nutrient management, has facilitated the development of innovative cultivation methods aimed at enhancing environmental sustainability in greenhouse tomato cultivation [17,21].
The aim of the present study was to investigate the environmental impacts of greenhousebased production of tomatoes in an innovative closed-loop soilless system, denominated as "agriponic", using the life cycle assessment (LCA) methodology.The environmental analysis conducted in this case study generated results that can serve as a foundational "knowledge base" for enhancing awareness about the impacts of tomato production.These findings can also assist stakeholders in implementing sustainable production practices, with the objective of guiding producers towards more environmentally friendly production methods.

Cultivation System
Agriponics represents a soilless hybrid production system that combines features of aeroponic and nutrient film technique (NFT) systems.In this cultivation system, plants grow on closed channels where the root system develops while partially suspended in the air, while the rest of the plants are in contact with the channel's bottom.The nutrient solution is distributed at intervals by sprayers and is partially absorbed by the roots, while excess solution flows out into the channels.Therefore, root uptake occurs partially by sprayer (aeroponic) and partially by the film of leaching solution passing through (NFT) (Figure 1).grow on closed channels where the root system develops while partially suspended in the air, while the rest of the plants are in contact with the channel's bottom.The nutrient solution is distributed at intervals by sprayers and is partially absorbed by the roots, while excess solution flows out into the channels.Therefore, root uptake occurs partially by sprayer (aeroponic) and partially by the film of leaching solution passing through (NFT) (Figure 1).
Excess nutrient solution is collected as it flows to the base of the channels for subsequent filtration, sanitization, and integration with new solution, thereby creating a closed-loop system that allows for reuse of the nutrient solution.
The objective of the model is to enhance environmental sustainability by focusing on water conservation, minimizing waste, improving energy efficiency, and reducing the presence of pathogens and pests.Simultaneously, it ensures that the product meets highquality standards.
The pilot greenhouse consists of 5 modules, each with the following characteristics: 9 m wide, 90 m long, 2.5 m height at the eaves, and 3.5 m height at the ridge (Figure 2).It is equipped with manual side openings with insect netting to allow for ventilation of a confined environment.The study's unheated greenhouse was equipped with an emergency heating system and an external anti-freeze system that comes into action when the external temperature drops below 4 °C.In the spring, a shading net was located over the plastic covering.
The pilot greenhouse presents a low technological level regarding its structure, but it is the most widespread approach used in southeastern Sicily for the cultivation of vegetables.
The agriponic cultivation system was composed of closed polystyrene channels (40 × 40 × 2500 cm) (Figure 2) allocated at a distance of 1.6 m from each other.The plants were placed on top of the channels at a distance of 28 cm.The nutrient solution (NS) was distributed by sprayers (one per plant), and the excess solution flowed out into the channels to a tank.(Figure 3).Excess nutrient solution is collected as it flows to the base of the channels for subsequent filtration, sanitization, and integration with new solution, thereby creating a closed-loop system that allows for reuse of the nutrient solution.
The objective of the model is to enhance environmental sustainability by focusing on water conservation, minimizing waste, improving energy efficiency, and reducing the presence of pathogens and pests.Simultaneously, it ensures that the product meets high-quality standards.

Greenhouse
The agriponic system was installed inside an iron-plastic greenhouse in a commercial farm located in Ispica (RG), Italy (36 • 75 N, 14 • 91 E).
The pilot greenhouse consists of 5 modules, each with the following characteristics: 9 m wide, 90 m long, 2.5 m height at the eaves, and 3.5 m height at the ridge (Figure 2).It is equipped with manual side openings with insect netting to allow for ventilation of a confined environment.The study's unheated greenhouse was equipped with an emergency heating system and an external anti-freeze system that comes into action when the external temperature drops below 4 • C. In the spring, a shading net was located over the plastic covering.The pilot greenhouse presents a low technological level regarding its structure, but it is the most widespread approach used in southeastern Sicily for the cultivation of vegetables.The agriponic cultivation system was composed of closed polystyrene channels (40 × 40 × 2500 cm) (Figure 2) allocated at a distance of 1.6 m from each other.The plants were placed on top of the channels at a distance of 28 cm.The nutrient solution (NS) was distributed by sprayers (one per plant), and the excess solution flowed out into the channels to a tank.(Figure 3).

Tomatoes
Forty-day-old cherry tomato seedlings (cv.Durillo, grafted into Optifort), grown in stone wool cubes (5 × 5 × 5 cm (Grodan@ ROCKWOOL B.V. Roermond, The Netherlands)), were transplanted on 29 December 2021, inside the greenhouse in the channels of the agriponic system.A planting density of 1.5 plants/m 2 was adopted.The plants were grown vertically, keeping 2 shoots per plant.
The NS was prepared by agro experts, in accordance with their experience on soilless agriculture systems.

Tomatoes
Forty-day-old cherry tomato seedlings (cv.Durillo, grafted into Optifort), grown in stone wool cubes (5 × 5 × 5 cm (Grodan@ ROCKWOOL B.V. Roermond, The Netherlands)), were transplanted on 29 December 2021, inside the greenhouse in the channels of the agriponic system.A planting density of 1.5 plants/m 2 was adopted.The plants were grown vertically, keeping 2 shoots per plant.
The NS was prepared by agro experts, in accordance with their experience on soilless agriculture systems.
The leached, collected, and disinfected NS was integrated (closed-loop) with new NS by fertigation on the basis of the pH and EC values.

Irrigation System
The water and nutrient solution cycle for the agriponic system is shown in Figure 3.The nutrient solution (NS) distribution system involves the following steps: water is drawn from a well, filtered to remove impurities, and sent to the primary PVC tank that houses numerous sensors and probes.Then, the water is pumped to dosing channels where tanks filled with nutrient solution and acids mix with it.After this, the water is returned to the primary tank and sent through electric pumps to disc filters before being directed to cultivation channels via a solenoid valve.In the last phase of the system, the water is filtered once more and sent to a recovery tank that collects drained nutrient solutions from all areas.Electric pumps transport the substance to mesh filters before feeding it back into the primary tank.
The irrigation frequency was set at 18 min during daylight, with an irrigation time of 18 s.A total irrigation volume of 302 m 3 was used.

Production Process Description
The tomato production process involved various stages, such as greenhouse preparation, transplanting, continuous nutritional support and treatments (plant growth), appropriate climatic management, and crop disposal.
First, the greenhouse was prepared; this phase lasted one month (November 2021 to December 2021).Then, raw materials for greenhouse production were purchased, i.e., the plants and fertilizers for plant growth.The tomato seedlings were planted in the greenhouse on raised supports; this phase lasted two days from 28 to 29 December 2021.From 28 December 2021 until the end of July (the period in which the harvest took place and then the crop was disposed of), nutritive solutions were distributed, followed by foliar applications as phytosanitary, fertilizer, and biostimulated treatments (from January 2022 until July 2022).
An emergency diesel heating system was installed inside the greenhouse, which goes into operation when the temperature inside the greenhouse drops below 4 degrees.A total of 50 L of diesel fuel was consumed during the considered time period.
On 31 July 2022, the total disposal of the crop took place.This detailed process highlights the complexity and dedication required for efficient and effective greenhouse tomato production.

Life Cycle Assessment
The methodology used to assess the environmental impacts is the life cycle assessment according to ISO 14040 (2006) [8] and ISO 14044 (2006) [9].In accordance with ISO 14040 [8] and ISO 14044 [9], the procedure was standardized, and the main steps are outlined as follows: (1) goal and scope definition; (2) data collection and life cycle inventory; (3) impact assessment; and (4) interpretation.The following paragraphs explain how each phase of the LCA for this case study was conducted.The goal and scope aim to define, together with the main goal of the study and also all assumptions necessary, to characterize the case study and make the results reproducible.Indeed, in the goal and scope, the audience of the study, functional units, reference flow, system boundary, type and quality of data, impact categories analyzed, and software used must be defined.
The life cycle inventory presents all input and output data used in the study.The input and output data included all of the energy and materials entering into the system, and all of the emissions and materials/wastes and products going out of the system, respectively.
In a life cycle impact assessment, the inventory data are classified and assigned to the main impact categories considered in the study and presented in the goal and scope, and then throughout characterization of the model translated into impact categories.Most of the related studies, and also the current one, focused on the midpoint impact categories that translate the inventory into impacts.A further level of assessment would be to use endpoint impact categories, which further translate the impacts into damages to three main areas of protection: human health, ecosystem quality, and resource depletion.The current study focused on midpoint impact categories.The last phase, the interpretation, included sensitivity analysis and interpretation of the results.
In the following paragraphs, the case study and its related results are presented following the LCA methodology.

Goal and Scope
The goal of this study is to evaluate the environmental impacts, through mass and energy balances of each operation in-depth "from cradle to gate" analysis, of the production of fresh cherry tomatoes grown in greenhouses with agriponic systems.The life cycle of the tomato was considered in its various stages, from the purchase and planting of the tomato seedlings to the first harvest taking place.The functional unit (FU) considered in this study is 1 ton of harvested cherry tomatoes.The analyzed system boundary and the life cycle inventory are shown in Figure 4.

Goal and Scope
The goal of this study is to evaluate the environmental impacts, through mass and energy balances of each operation in-depth "from cradle to gate" analysis, of the production of fresh cherry tomatoes grown in greenhouses with agriponic systems.The life cycle of the tomato was considered in its various stages, from the purchase and planting of the tomato seedlings to the first harvest taking place.The functional unit (FU) considered in this study is 1 ton of harvested cherry tomatoes.The analyzed system boundary and the life cycle inventory are shown in Figure 4.The description of the system boundary considers the inputs and outputs for each phase of the system.The inputs are any material and energy that is necessary to carry out the assessment of the environmental impact of the tomato production, while the outputs are the products or waste generated by the system.
The greenhouse system was analyzed in five phases, and the inputs and outputs for each phase are listed below.
Plant transplanting phase: Inputs include tomato plants, polypropylene wires, and clips made of PET used to make the tomato plants climb.Outputs include the polystyrene seed pots and their disposal.
Plant growth phase: During the plant growth phase, the inputs to the system include the water, fertilizers, pesticides, fungicide, foliar fertilizers, and electrical energy for pump operation.Meanwhile, the outputs are represented by PE fertilizer bags and pesticides, fungicide bottles, and the disposal of these items also taken into account.The distribution The description of the system boundary considers the inputs and outputs for each phase of the system.The inputs are any material and energy that is necessary to carry out the assessment of the environmental impact of the tomato production, while the outputs are the products or waste generated by the system.
The greenhouse system was analyzed in five phases, and the inputs and outputs for each phase are listed below.
Plant transplanting phase: Inputs include tomato plants, polypropylene wires, and clips made of PET used to make the tomato plants climb.Outputs include the polystyrene seed pots and their disposal.
Plant growth phase: During the plant growth phase, the inputs to the system include the water, fertilizers, pesticides, fungicide, foliar fertilizers, and electrical energy for pump operation.Meanwhile, the outputs are represented by PE fertilizer bags and pesticides, fungicide bottles, and the disposal of these items also taken into account.The distribution system for the nutrient solution and the defense and foliar treatment phase are also considered together in this phase.
Harvesting: In this phase, the total tomato plant production is considered.Greenhouse climate management: Inputs include the square meters of shading net used in the greenhouse, and energy produced using diesel fuel to heat the greenhouse.The output is the CO 2 produced by diesel combustion.
Crop disposal: Outputs include PET clips, and polypropylene wires and their disposal.
In the context of the tomato study, the software SimaPro 9.3.0.3 and the Ecoinvent database were used to quantify the environmental impacts of tomato cultivation in terms of greenhouse gas emissions, water consumption, energy use, and other relevant indicators.These data were collected and analyzed using the CML baseline method, which is a commonly adopted approach for life cycle assessment that considers the environmental impacts throughout all stages of the product's life cycle.

Life Cycle Inventory Analysis
The life cycle inventory (LCI) is a critical step in assessing the environmental sustainability of greenhouse tomato production.It involves the comprehensive quantification of inputs and outputs associated with each stage within the system boundaries.It assumes great importance, as it determines the quality of the data utilized in the LCA analysis.A successful completion of this stage exerts a substantial influence on the overall dependability and precision of the sustainability evaluation for greenhouse tomato production.
Given the unique characteristics of each production process, also in the context of greenhouse tomato production, primary data pertaining to the various cultivation steps are acquired through questionnaires and personal interviews.These primary data play a vital role in constructing accurate mass and energy balances, which serve as the foundation for the inventory.
The data required for studying the greenhouse tomato production system encompass several key aspects: -Water consumption; -Electricity consumption associated with pumps; -Fertilizer usage; -Irrigation period and duration; -Waste generation.
After gathering the data through the questionnaires, they were entered into SimaPro 9.3.0.3 software for analysis.The materials and products utilized in the greenhouse were examined by referring to the databases available in the software.In this case, the Ecoinvent database, developed by a Swiss research organization, was utilized.Ecoinvent is a comprehensive life cycle inventory database specifically designed to facilitate diverse sustainability assessments.
The input and output data for the various stages received through the questionnaires were entered into the software.They concern the main process units considered in the system Below are the input and output data corresponding to each stage of the system considered, Table 1 shows the quantities used.Plant transplanting phase: The input data include the number of tomato plants, while the output data include the quantity of plastic materials, specifically the amount of polystyrene used for 88 seed pots.Raw materials purchase phase: The input data include information about the tomato plants, such as the type of tomato grown, where they were purchased, the number of seedlings acquired, and the distance traveled by the vehicle to transport them to the greenhouse.For mineral fertilizers, the input data comprise the types of fertilizers used and their quantities.These inputs are considered to be part of the nutrient solution distribution system, as it involves the fertilizers used for tomato plant growth.Nutrient solution distribution system phase: The input data include the amount of nutrient solution in the tanks, the total water consumption for irrigation and nutrient solution, and the energy usage for pumps and artificial light.The output data entered pertain to the amount of polyethylene (PE) used for the fertilizer bags.
Defense and foliar treatment phase: The input data encompass the acaricides, insecticides, fungicides, and fertilizers used in the greenhouse, along with their quantities and water consumption.The output data collected pertain to the number of bottles used.
Greenhouse climate management phase: The input data involve the square meters of shading net used, and the liters of diesel consumed for greenhouse heating.
Crop disposal phase: The input data include the number of clips and wire length used to support the growth of the tomato plants.The output data primarily relate to the amount of plastic materials used, particularly from the pesticide bottles.
With regard to the fertilizers, acaricides, insecticides, and fungicides used during production, since the names of the products used could not be found in SimaPro, the various active ingredients present in the product used were included; the following tables (Tables 2 and 3) show the active ingredients contained in each product.

Impact Assessment Results
The elaboration of the inventory data was performed through LCA SimaPro 9.3.0.3 software, in agreement with the reference standard for LCA (i.e., ISO 14040-14044).The CML baseline was used to classify and characterize the inventory results in the impacts categories.
The impact categories that were considered in the greenhouse study were the following: Table 4 shows the results obtained with regards to characterization for the impact categories considered for each stage of the greenhouse production process analyzed.The following graphs (Figures 5-9) show for each phase the trends of the impact categories considered.
Based on the results obtained (Table 4), a comprehensive analysis of the impact categories reveals significant environmental implications associated with different phases of the system.Notably, the plant growth phase has the highest impacts for all impact categories, followed by greenhouse climate management.
With regard to the normalization phase, the following table (Table 5) shows the normalized values, compared to European values, of the impact categories taken into account in the study conducted for each stage of the system considered.Based on the results obtained (Table 4), a comprehensive analysis of the impact categories reveals significant environmental implications associated with different phases of the system.Notably, the plant growth phase has the highest impacts for all impact categories, followed by greenhouse climate management.
With regard to the normalization phase, the following table (Table 5) shows the normalized values, compared to European values, of the impact categories taken into account in the study conducted for each stage of the system considered.Based on the results obtained from the normalization LCA study on greenhouse tomato production (Table 5) and the analysis of the graph (Figure 10), it is evident that the phases with the highest environmental impacts are the plant growth phase and the climatic management phase of the greenhouse.These two phases contribute significantly to the overall environmental footprint due to the use of fertilizers, plant protection products, electrical energy for operating pumps used in nutrient solution distribution and plant protection, and the utilization of diesel fuel for heating the greenhouse when required.
Moreover, as depicted in the graph (Figure 10), the phases of aeroponic plant transplanting, harvesting, and crop disposal demonstrate minimal impacts across all of the considered impact categories in the study, indicating their relative insignificance in terms of environmental effects.

Interpretation
The interpretation phase is the final step of the LCA process, where the results obtained from the impact analysis are analyzed and interpreted.The main conclusions are summarized below.
Considering the five impact categories studied and the different phases of tomato cultivation, it is evident that the plant growth phase has the greatest environmental impact across all of the impact categories.This phase involves the use of fertilizers, phytopharmaceuticals, and pesticides for plant growth, along with significant electricity consumption for pump operation.
In terms of the GWP, the plant growth phase is the primary contributor to environmental impacts.The use of pumps powered by electricity for nutrient solution distribution during this phase is a key factor.It would be beneficial to explore the use of renewable energy sources to power the pumps.Additionally, the greenhouse climate management phase, which involves diesel fuel-based heating, also has notable impacts.Exploring alternative heating methods for the greenhouse would be desirable.
The plant growth phase has the highest environmental impact in the ODP category.The use of fertilizers and pesticides during this phase contributes to the impacts.The greenhouse climate management phase also has some environmental impacts, although these are relatively lower.Finding alternative heating methods for the greenhouse instead of relying on diesel would be desirable.The phases of aeroponic plant transplanting, harvesting, and decommissioning have minimal impacts.
In terms of the POCP, which assesses air pollution, the plant growth phase has the most significant environmental impact due to the use of fertilizers and pesticides.The greenhouse climate management phase, which involves diesel fuel-based heating, also contributes to environmental impacts.However, the impacts of the aeroponic plant transplanting, harvesting, and decommissioning phases are not high.The acidification potential, which measures acid rain, is primarily influenced by the plant growth and greenhouse climate management phases.On the other hand, the phases of aeroponic plant transplanting, harvesting, and crop disposal do not have significant impacts.
The eutrophication potential, which assesses water eutrophication caused by excessive nutrients, indicates that the plant growth phase contributes the most to water pollution, specifically due to the presence of phosphorus.This phase has the greatest environmental impact in this category.The greenhouse climate management phase also has relatively high impacts.
In conclusion, the interpretation of the LCA results for greenhouse tomato production highlights the significance of the plant growth phase and the greenhouse climate management phase in terms of their environmental impacts.

Interpretation
The interpretation phase is the final step of the LCA process, where the results obtained from the impact analysis are analyzed and interpreted.The main conclusions are summarized below.
Considering the five impact categories studied and the different phases of tomato cultivation, it is evident that the plant growth phase has the greatest environmental impact across all of the impact categories.This phase involves the use of fertilizers, phytopharmaceuticals, and pesticides for plant growth, along with significant electricity consumption for pump operation.
In terms of the GWP, the plant growth phase is the primary contributor to environmental impacts.The use of pumps powered by electricity for nutrient solution distribution during this phase is a key factor.It would be beneficial to explore the use of renewable energy sources to power the pumps.Additionally, the greenhouse climate management phase, which involves diesel fuel-based heating, also has notable impacts.Exploring alternative heating methods for the greenhouse would be desirable.
The plant growth phase has the highest environmental impact in the ODP category.The use of fertilizers and pesticides during this phase contributes to the impacts.The greenhouse climate management phase also has some environmental impacts, although these are relatively lower.Finding alternative heating methods for the greenhouse instead of relying on diesel would be desirable.The phases of aeroponic plant transplanting, harvesting, and decommissioning have minimal impacts.
In terms of the POCP, which assesses air pollution, the plant growth phase has the most significant environmental impact due to the use of fertilizers and pesticides.The greenhouse climate management phase, which involves diesel fuel-based heating, also contributes to environmental impacts.However, the impacts of the aeroponic plant transplanting, harvesting, and decommissioning phases are not high.The acidification potential, which measures acid rain, is primarily influenced by the plant growth and greenhouse climate management phases.On the other hand, the phases of aeroponic plant transplanting, harvesting, and crop disposal do not have significant impacts.
The eutrophication potential, which assesses water eutrophication caused by excessive nutrients, indicates that the plant growth phase contributes the most to water pollution, specifically due to the presence of phosphorus.This phase has the greatest environmental impact in this category.The greenhouse climate management phase also has relatively high impacts.
In conclusion, the interpretation of the LCA results for greenhouse tomato production highlights the significance of the plant growth phase and the greenhouse climate management phase in terms of their environmental impacts.

Discussion and Conclusions
The LCA results for greenhouse tomato production highlight the significance of the plant growth phase and the greenhouse climate management phase in terms of their environmental impacts.Indeed, these two phases are the most relevant in terms of absolute impact categories, as well for the normalized results to European values.
This LCA study has been applied for the first time to this innovative greenhouse system, and the results are unique.Moreover, it has already allowed for the elaboration of some suggestions to improve the environmental performance in the first implementation following the concept of eco-design.These suggestions are summarized in the following paragraphs.
It is essential for future applications to minimize the use of plastic materials: it is advisable to explore alternative materials used for seed pods, fertilizer bottles, and greenhouse components, in order to reduce the reliance on plastic.Utilizing materials that have lower environmental impacts, or are made from recycled plastics, can be beneficial.
In addition, it could be helpful to try to seek sustainable heating alternatives.To mitigate CO 2 emissions associated with greenhouse heating, it is essential to explore alternative heating sources beyond diesel.Incorporating sustainable heat sources such as renewable energy or efficient heating systems can significantly reduce greenhouse gas emissions.
A further option for eco-friendly transportation is to use low-emission vehicles, and to reduce reliance on diesel fuel for transportation.This strategy can help to minimize CO 2 emissions during the transportation of tomato crops.
Despite the plant growth phase being the most environmentally impactful, it is important to recognize the advantages offered by aeroponic cultivation in terms of its environmental sustainability.Aeroponics offers several advantages, including the utilization of smaller amounts of water compared to other plant cultivation systems (reducing water usage by an impressive 98%) which is particularly relevant for south European areas that have water scarcity issues.It also reduces labor costs, and allows for expansion of the root system without restrictions.This method enables direct and ample oxygen absorption, and ensures rapid and consistent delivery of nutrient-rich mist, creating an optimal environment for root growth [22].This is possible due to the precise control of nutrient inputs provided to the system, enabling a more efficient use of water, nutrient solutions, and pesticides [23,24].Regulating these inputs based on the specific needs of the plants reduces waste and minimizes the negative impacts associated with their use.
Furthermore, since aeroponic cultivation does not require the use of soil, this method is an alternative for people with limited spaces to grow plants, and offers additional environmental benefits.By reducing the dependence on soil, the risks of soil degradation and pest infestations are limited, which in turn reduce the need for fungicides, herbicides, and insecticides.This characteristic also helps to minimize the impacts resulting from land use change, one of the main causes of environmental degradation.As a result of these characteristics, aeroponics is particularly beneficial in regions where the soil conditions are unsuitable for traditional plant growth.Additionally, thanks to the controlled environment in which they are grown, the plants can be cultivated throughout the year, regardless of the external weather and conditions.
Finally, to further reduce the environmental impacts of aeroponic plant cultivation, it is crucial to adopt renewable energy sources to power the pumps that distribute the nutrient solution.Using electricity from sustainable sources helps reduce greenhouse gas emissions and the consumption of non-renewable resources.
In conclusion, despite the plant growth phase representing a significant impact in aeroponic plant cultivation, its intrinsic characteristics offer numerous environmental advantages [22].The precise control of nutrient inputs, reduction in land use, and the adoption of renewable energy sources are just some of the aspects that make aeroponic cultivation a more sustainable and eco-friendly method for greenhouse tomato production.

Figure 1 .
Figure 1.Cultivation channel section in the agriponic system.

Figure 1 .
Figure 1.Cultivation channel section in the agriponic system.

Figure 2 .
Figure 2. Greenhouse and cultivation channels in the agriponic system.

Figure 2 .
Figure 2. Greenhouse and cultivation channels in the agriponic system.

Figure 3 .
Figure 3. Operation of the greenhouse irrigation system.

Figure 3 .
Figure 3. Operation of the greenhouse irrigation system.

Figure 10 .
Figure 10.Trends of the various impact categories for the system phases.

Figure 10 .
Figure 10.Trends of the various impact categories for the system phases.

Table 1 .
Input and output data of the various phases of the system considered.

Table 3 .
Active principal ingredients of mineral fertilizers used.

Table 5 .
Values of impact categories normalized to European values for each stage considered in the system.