Mechatronics Technology and Transportation Sustainability

This editorial introduces a Special Issue (SI) that contains nine chosen articles in Sustainability [...]

digital replicas of various stages of the product lifecycle. Digital representation of products and processes that can provide additional information and services about the product through advanced simulations and predictive algorithms is a trending topic in modern mechatronics. Such paradigm is called digital twins (DTs) and is widely implemented in I4.0 and many other fields, from aerospace to healthcare. The current SI includes two studies on DT technologies. The first research paper by Garg et al. [5] focuses on the DT of industrial robots and suggests using virtual reality for programming and simulation of the robotic cell. The application of modern industrial robots involves different mechatronics subdisciplines, such as communication, energy conversion, control, simulation, etc.; in this case, DT models that assist in the online/remote operation of a unit by creating a 3D digital environment of a real-world configuration is an essential contribution to the field. One of DT's perspective applications is in the automotive industry. The next in the list, the SI contribution by Ibrahim et al. [6], presents an overview of the implementation of DT topology in autonomous electric vehicle (EV) propulsion drive systems. In this contribution, a generic review of main trends in the field of DT developments is supplemented with different simulation technologies comparison and applications analysis.
The notable progress in the electric automotive industry, combined with product innovations, affected broader aspects of mechatronics. EVs' rapid appearance and usage influence the operation of electric power systems. The included research work by Iqbal et al. [7] focuses on estimating time-dependent charging and power quality aspects of grid-connected EVs. The research questions related to the charging demand of the EVs discussed in the contribution by Shabbir et al. [8] extended the scope of the current SI. Sustainable electrical grids of the future include EVs as an essential part of consuming and producing electricity to the grid. Therefore, the current SI further includes the impact of the EVs on low voltage residential networks, as well as more deep studies on electrical grid power quality issues, also by Iqbal et al. [9].
The questions of electrical power grids are not often directly addressed to mechatronics. However, as it was previously defined, mechatronics is a multidisciplinary branch of engineering and, at present, combines mechanical and electronic engineering, but also computer science, control systems, modeling and simulation domains, etc. Combining several energy sources is definitely a multidisciplinary question, and mathematical modeling and simulation of a hybrid system are always challenging for researchers. Therefore, the research questions discussed by Petrochenkov et al. in [10,11] directly address the topic of the SI.
A stable and reliable power grid is essential for I4.0 and the implementation of mechatronics. The research work by Zhukovskiy et al. [12] concludes the SI, in which the authors focused on the management of the workload schedule in order to equalize energy consumption and improve energy-efficient use of equipment. This study is based on the analysis of statistical data for the development of the algorithm for collecting, processing, and planning power consumption data, including all levels of interaction between devices.
This time, the SI focused on different mechatronics aspects that can promote more sustainable technologies in the future. This SI entitled "Mechatronics Technology and Transportation Sustainability" contains nine contributions that were presented as review and research papers by 42 scientists from Estonia, Russia, Turkey, Finland, Pakistan, and Latvia.