A Method for the Deﬁnition of Local Vulnerability Domains to Climate Change and Relate Mapping. Two Case Studies in Southern Italy

: Climate change is contributing to raising disaster risk, with variable impacts depending on the local level of vulnerability. This paper describes a method for the deﬁnition of local vulnerability domains to climate change. The application of the methodology is aimed at building local vulnerability maps. The set of indicators of climate exposure, sensitivity and adaptive capacity, theoretically identiﬁed and practically tested on two case studies in southern Italy, contributes to support the territories in identifying the main local vulnerabilities, as well as deﬁne, subsequently, a systematic framework for identifying the most suitable mitigation and adaptation measures to climate change according to the speciﬁcities of the contexts of interest. In this regard, we consider the framework of risks and related impacts due to climate change on urban infrastructure proposed by the European Commission in order to face common challenges in the EU territories. Speciﬁcally, reference is made to three thematic focuses, which are “transport infrastructures”, “energy infrastructures” and “buildings and construction sector”. Although still at an early stage, the results of the research contribute to identifying useful elements of interrelation with the urban context for guiding resilient planning choices and reducing risks.


Introduction
Climate change is a systemic phenomenon on a global scale [1,2] attributable to anthropogenic and natural causes [3,4]. It covers changes in the average climatic conditions and climate variability and changes in the magnitude and frequency of extreme events. The result is an increase in weather-related disasters. The risks associated with this change are highly uncertain and variable according to the levels of vulnerability that characterize cities and communities [5]. In particular, the urban landscape structure and the characteristics of the urban land surfaces, which contribute to the urban heat island [6], can alter the microclimate aggravating local impacts [7]. In light of the expected evolutions in terms of frequency, timing and intensity of extreme weather events [8], it is necessary to promote the assessment of local vulnerability levels as well as the mitigation and adaptation capacity of places in accordance with sustainable development goals.
In particular, climate change is contributing to raising disaster risk [9,10]. Although this link is widely recognized in the literature [11][12][13], historically, the work of disaster risk specialists and climate change specialists has too often been isolated and autonomous [14]. The difficulties in integration and collaboration between these two research areas are due to different backgrounds, organizational and motorways in general and specific cases of coastal and mountain roads), navigation (inland and maritime navigation, ports) and aviation (airports). Energy infrastructures are affected by climate change with variable effects in relation to the operations of transmission, distribution, generation and energy demand with substantial differences depending on the different types of energy supply (for example, hydro, wind offshore, biomass, geothermal). Finally, buildings and infrastructures can be vulnerable to climate change depending on their design and location). While climate impacts vary from sector to sector as these first distinctions emerge, mitigation and adaptation measures can include many common challenges. This characteristic suggests the need to build systemic and integrated frameworks of measures necessary to ensure sustainable and resilient development of infrastructures and, in general, of the territory. Below we will refer, by way of example, only to transport infrastructures.
The main effects of climate change that can cause damage to transport infrastructures are temperature increases, variation in the precipitation regime and the increase in sea level. Climate change can therefore have physical effects on infrastructures with variable impacts on the stability, as well as consequent influence on the management and safety of transport systems. It is, therefore, necessary to plan mitigation measures in order to reduce anthropogenic pressures on the environment and adaptation, in order to decrease the vulnerability of natural and socioeconomic systems. These measures can be associated with structural or nonstructural actions. The former is intended as physical and technological solutions to improve infrastructure, the latter as regulatory and management solutions to be adopted for more sustainable planning of the territory. In relation to transport infrastructures, a systematic framework of mitigation and adaptation measures is reported in Table 1, accompanied by some examples of actions. In particular, the mitigation measures are attributable to the European avoid-shift-improve (ASI) approach [101], while the adaptation measures summarize the risk framework proposed by the European Commission [19]. Table 1. Systematic framework of climate change mitigation and adaptation measures for transport infrastructures.

Mitigation (M) and Adaption (A) Measures Examples of Structural (S) and Nonstructural (NS) Actions
Avoid the demand for private motorized mobility (M) Promote integrated planning and effective management of mobility and transport data (NS) Support the implementation of urban plans for sustainable mobility (NS) Development of ICT technologies to support infomobility (S)

Reduce negative security impacts (A)
Enhance the synergies between sustainable mobility and road safety objectives (NS) Promote environmentally sustainable behaviors (NS) The actions reported in Table 1 have been proposed at a theoretical and regulatory level for the planning of some Italian regions, including Emilia Romagna and Veneto [102][103][104]. These could be Sustainability 2020, 12, 9454 5 of 26 shared in other contexts in order to increase resilience, after a more detailed study on the specificities of local vulnerability, which guides choice towards the most appropriate action or set of actions.

The Need for Local Climate Vulnerability Studies
As stated above, understanding vulnerability is crucial to support local and regional planning in defining mitigation and adaptation measures. However, despite increased awareness and assessments of the processes that produce vulnerability, disaster risks prevail. This raises questions on the effectiveness of vulnerability assessments and their applications for hazard mitigation and adaptation. The international literature includes a range of vulnerability assessment methods, wherein frequently the selection of any particular method is governed by the research objectives [105]. The estimation approach climate vulnerability based on the aggregation of specific indicators relating to the various components appears to be appropriate and widely spread [106]. Vulnerability assessments are increasingly becoming interdisciplinary, considering more contextualized variables and management alternatives. Given the complex nature of climate change vulnerability, efforts to quantify vulnerability to specific climatic events often use multi-variate statistical analysis to estimate the contribution of sociodemographic and built environment characteristics to a population's sensitivity to and capacity to recover from exposure to that event [107,108]. As an example, the component of climate change exposure can be measured by a variety of climate change metrics [109][110][111][112]. Climate change metrics are either calculated for a single locality, that is at the local level or for a set of localities, that is at the regional level [113].
Among the different national and international studies and methodologies [114][115][116][117][118][119][120][121][122] used for the assessment of local climate vulnerability, some of them have constituted a useful reference for the methodological approach presented in this paper.
The first was proposed by the European Spatial Planning Observation Network (ESPON) [114]. It suggests a combination of potential regional impacts of climate change with the regional capacity to adapt to climate change to produce the vulnerability map. In particular, the aggregate potential impact of climate change is determined by exposure and sensitivity and the overall capacity to adapt to climate change by calculating a weighted combination of economic capacity, infrastructural capacity, technological capacity, knowledge and awareness and institutional capacity, with the weights being based on a Delphi survey of the ESPON monitoring committee.
Another methodological reference is constituted by the European Environment Agency (EEA) [115] that defines the potential vulnerability to climate change as the result of the combination of aggregate impacts and adaptive capacity. The adaptive capacity was defined by indicators on knowledge and awareness, economic resources as well as technological, infrastructural and institutional capacity to adapt to climate change. The aggregate impacts include: -Potential physical impacts related to physical structures such as settlements, roads, railways, airports, harbors, thermal power plants and refineries; -Potential social impacts of climate change, related to Europe's population, which is also mainly sensitive to extreme events that are driven by climate change: coastal storm surges exacerbated by sea-level rise, increases in river flood heights, increasing flash floods, but also increasing heat events. Sensitivity to these changes is a matter of location, age group distribution, but also the density and size of urban areas that create urban heat island (UHI) effects; -Potential cultural impacts of climate change, focused on tangible cultural assets because intangibles like norms and attitudes were considered part of the adaptive capacity of a region; -Potential economic impacts of climate change were analyzed in regard to especially climate-sensitive economic sectors, namely agriculture and forestry, energy production and consumption as well as summer and winter tourism; -Potential environmental impacts analyzed relate to protected natural areas, soil organic carbon content and the propensity of soil erosion and forest fires. The Report on the state of scientific knowledge on impacts, vulnerability and adaptation to climate change in Italy [116] was also analyzed, although not based on a system of indicators, which constitutes the knowledge base of the National Strategy for Adaptation to Climate Change [123].
The analysis of these studies has brought out two reflections-the first concerns the observation scale of the phenomena, the second the available data. Considering the large-scale vulnerability assessment [122] can only provide an understanding of impact. These research results cannot be transformed into local policies or measures because they do not understand specific socioeconomic or natural conditions of cities. Then a local observation scale [117] is needed. Overall, these indicators quantitatively summarize the combined effect of territorial variables connected to subsets of climatic factors, elaborating them on the basis of various models consolidated. However, a critical aspect of the local vulnerability assessment concerns the availability of adequate starting data in terms of space-time scales and themes. In Italy, a database aimed at these specific needs is not yet operational although, thanks to an effort of homogenization and standardization by the regional and central administrations today, there are databases and geoportals containing a significant number of environmental and territorial data spatialized with the possibility of advanced services to support various processing that may employ thematic and numerical cartography technologies, GIS, and or that can be combined with analysis of aerospace remote sensing, an indispensable prerequisite for the construction of specific indicators at the urban scale.

Methods
The 2030 Agenda addressed the issue of climate change also in the context of the Sustainable Development Goals 2015-2030 (SDGs) and in particular with objective 13, which mentions "take urgent actions to combat climate change and its impacts" [124] to which national governments and locals are called upon to contribute. The EU, recognizing the complex problems related to climate change affecting all the areas of competence, has long since begun to set ambitious measures and goals to be achieved within predefined time thresholds. In December 2019, the European Commission presented the European Green Deal [125] as a chance to transform the challenges related to climate change into opportunities for a sustainable future. The proposed research, incorporating these guidelines, is aimed at providing a new expeditious method for the definition of local vulnerability domains to climate change and the related mapping. The general objective is to support the territories in identifying the main local vulnerabilities, as well as subsequently define the most suitable mitigation and adaptation measures to climate change according to the specificities of the contexts of interest.

Climate Change Vulnerability Domain
The methodology considers climate exposure, sensitivity and adaptive capacity as defining components of the domain of vulnerability to climate change [23]. The authors propose to evaluate each component on the basis of a system of indicators, appropriately chosen at the urban scale and transformed through normalization operations, in order to construct summary indicators capable of quantifying the relative variations with reference to sub-municipal territorial units. In particular, for the choice of indicators, the authors reworked and referred to the themes proposed by different literature studies and sector documents [126][127][128] [126] for the choice of indicators relating to the components of sensitivity and adaptive capacity.
As anticipated, the procedure is rapid and is capable of providing useful results powered only by the information available on a local scale, but which has been built to be updated and improved over time. The procedure is also characterized by being replicable as it is based on information available for the entire territory and consequently can be used in different urban contexts.

Climate Exposure Component
Climate exposure, representing a vulnerability component, summarizes the information necessary for the construction of the climatic profile of the context of interest. The knowledge of the climate allows the identification of impacts induced by climate change and is based on the monitoring of meteorological variables. For the construction of the local climatic profile, the methodology refers to indicators attributable to temperature and precipitation values. In particular, the time series of the climatic data considered are elaborated through statistical methods and models in order to consider representative indicators of the extreme values. These represent, in fact, the most frequent cause of negative impacts on the environment and, in general, on the territory.
The Expert Team on Climate Change Detection and Indices (ETCCDI) of the CCL/CLIVAR Working Group on Climate Change Detection has defined a set of 27 indicators [130], suitable for describing extremes of temperature and precipitation in terms of frequency, intensity and duration. These indicators are divided into categories. Some indicators are defined by a fixed threshold value; others are absolute indicators; others are based on percentiles; still, others express duration. Compared to the total of indicators identified by ETCCDI, the methodology considers 18 indicators (Table 2) defined among the most representative of the Italian climate by the Italian National Institute for Environmental Protection and Research [126] and divided into three categories, that are cold extremes indicators (FD0, TR20, TNx, TNn, TN10p, TN90p), indicators of the extremes of heat (SU25, TXx, TXn, TX10p, TX90p, WSDI) and indicators of the extremes of precipitation (RX1day, Rx5day, R10, R20, R95p, SDII). In particular, the annual temperature indicators FD0, TR20 and SU25 and the precipitation indicators R10 and R20 are defined by a fixed threshold value with respect to which their variation can have a significant impact on both society and the natural environment. The TNx, TNn, TXx and TXn temperature indicators and the RX1day and RX5day precipitation indicators represent the highest or lowest recorded over the course of a month or year; they are therefore absolute indicators. The TN10p, TN90p, TX10p, TX90p and R95p indicators are percentile-based indicators. They allow evaluation of Sustainability 2020, 12, 9454 8 of 26 the evolution of moderate climate systems by counting the excesses with respect to threshold values defined in terms of frequency on the distribution of events in the reference climatological period. The WSDI indicator is a duration indicator aimed at quantifying prolonged and intense periods of heat. The SDII indicator does not fall within the aforementioned categories, but by measuring the intensity of rainfall, it allows for a complete picture of the evolution of the precipitation extremes to be obtained. For application purposes, the historical series considered to evaluate the indicators refer to the data collected by monitoring stations equipped with a thermometer and a rain gauge and are the following in the time period from 2010 to 2019: the series of minimum daily temperatures, the series of maximum daily temperatures and the series of accumulated daily rainfall.

Sensitivity Component
Sensitivity is a component of vulnerability to climate change, understood as the degree to which a system or species is affected, both adversely and beneficially, by climate variability or climate change [23]. Looking at the urban system, the impacts generated by climate change vary according to a complex set of contextual elements that the proposed methodology distinguishes (Table 3) into elements characterizing the environmental capital (EnvC-1, EnvC-2, EnvC-3, EnvC-4, EnvC-5, EnvC-6), the share capital (SocC-1 and SocC-2) and the economic capital (EcoC-1, EcoC-2, EcoC-3, EcoC-4, EcoC-5). The selected indicators contribute to assessing the sensitivity of the context to certain impacts. Sensitivity is identified according to the categories that refer to specific properties of the reference system. The impacts generated by climate change may impact both natural resources and buildings and infrastructures, as well as the population settled in social and economic terms. The category of environmental capital refers to natural factors through the EnvC-1, EnvC-2, EnvC-4, EnvC-5, EnvC-6 indicators, and to urban-morphological factors through the EnvC-1 and EnvC-3 indicators. The category of social capital summarizes the characteristics of the population above all from a demographic point of view as the physiological state of the population can make it more or less susceptible to climate change. Specifically, the SocC-1 indicator influences sensitivity in a negative way; on the contrary, the SocC-2 indicator in a positive way. This difference will influence, as explained below, the assessment of the direction of the indicator values in the normalization process. The category of economic capital refers to aspects related to agricultural economic activity, as well as to the economic condition of families, respectively, through the EcoC-3, EcoC-4 and EcoC-5 indicators.

Adaptive Capacity Component
Adaptive capacity refers to the "ability of a system to adapt to climate change-including climate variability and extremes-to moderate potential damage, exploit opportunities or cope with consequences." [131] Each urban settlement expresses a capacity response called adaptive capacity that can favor the containment of some impacts. This is a concept that includes the intrinsic characteristics of the system, including the ability to analyze and implement adaptation strategies, as well as to manage any events. In this sense, for evaluation purposes, the degree of awareness of citizens, the ability to govern and the resources available to local administrations are also influential. The indicators selected (Table 4), therefore, refer to the categories of knowledge (KnoC-1, KnoC-2, KnoC-3) and resources (ResC-1, ResC-2, ResC-3). In particular, the KnoC-1 and KnoC-2 indicators refer to knowledge that can facilitate access to and interpretation of information. The KnoC-3 indicator considers attention paid in the context of municipal planning instruments to the expected impacts due to climate change with reference to the Italian Strategic Environmental Assessment [132]. The ResC-1 indicator refers to the level of the municipal periphery of the supply and service centers measured in travel times. In particular, the classification adopted by the Italian National Strategy for Inner Areas [52] considers three main services, which are health, education and mobility. The ResC-2 and ResC-3 indicators quantify, respectively, the presence of residential buildings in a good state of conservation and the green areas as elements capable of reducing urban vulnerability.

Synthesis and Elaboration of Vulnerability Map
Vulnerability is defined as a function of exposure to climate stimuli, sensitivity and adaptive capacity of the system to adapt to climate change. The local vulnerability assessment proposed by the authors is based on quantitative analysis. The vulnerability values are associated with a scale of values between zero and one. The higher values correspond to a higher level of climatic vulnerability; the lower values correspond to a lower level of climatic vulnerability. In order to summarize the collected data, assess the vulnerability and then elaborate the local vulnerability maps, the following procedure is planned: Assessment of the indicators of climate exposure, sensitivity and adaptive capacity;

2.
Association of the indicator information to minimum territorial units by geographic information system (GIS); 3.
Calculation of the three synthetic indicators (I exp , I sens , I ad cap ); 5. Estimation of the local vulnerability level.
As regards the first phase, the indicators were chosen to be available on the municipal scale through the territorial information systems and local statistical databases. These data must subsequently be associated in a GIS environment with minimum territorial units or the smallest area to which the data can be associated. For example, the census sections (In Italy, the census sections constitute the minimum unit of data collection by the municipality. Starting from the census sections, the higher level geographical and administrative entities such as inhabited localities, sub-municipal areas, electoral districts and others can be reconstructed) represent the minimum survey unit associated with sociodemographic data. The next step is to normalize the indicators. Normalization is required before any data aggregation as the measures in the dataset are frequently associated with different measurement units. There are numerous methods of normalization [133][134][135]. Min-max method normalizes the measures to have an identical range (from 0 to 1) by subtracting the minimum value and dividing it by the range of the measured values. x In formula (1) x i represents the individual data point to be transformed, x min the lowest value for that indicator, x max the highest value for that indicator and x i,1 the normalized value within the range of 0 to 1.
The normalization process is very delicate. In fact, lower values should reflect positive conditions in terms of vulnerability and higher values, more negative conditions. It is, therefore, important to pay attention to the direction of the indicator values. If the direction of the indicator's value range is negative, the vulnerability increases as the indicator value decreases and vice versa. Hence, in this case, the range of values of the indicator should be inverted so that the lowest value is represented by the standardized value 1 and the highest by the standardized value 0. To achieve this, we simply subtract the value from 1 to determine the final standardized value. In particular, this procedure is indispensable for some sensitivity indicators as well as for indicators relating to the ability to adapt.
After normalizing the data, it is necessary to calculate the synthetic indicator for each component by aggregating the results of the individual indicators.
Formula (2) allows estimation of the synthetic indicator of the I C component by combining the normalized values of the indicators x i,1 previously weighted by associating the relative weights w i . By applying a uniform weighting, the indicators are simply summed and divided by the number of indicators.
The last step involves estimating local vulnerability to climate change (V), such as: V = w exp · I exp + w sens · I sens + w ad cap · I ad cap w exp + w sens + w ad cap In Formula (3) I exp , I sens and I ad cap represent the synthetic indicators for the components climate exposure, sensitivity and adaptive capacity, w exp , w sens and w ad cap represent the relative weights.
Implementation in a GIS environment allows data to be processed and returned in graphic form through vulnerability maps. These are tools known to the literature [136], which make it possible to classify and identify the most vulnerable territorial elements in the specific case with respect to the risks induced by climate change. The possibility of quantifying and locating the main critical issues in a territory is offered as a necessary condition for planning adequate strategies and interventions for the implementation of targeted mitigation and adaptation measures [137,138] as well as for playing an educational role for social learning of the mechanisms through which climate change can interact with anthropogenic and natural systems [139].

Results
The methodology described was tested in two contexts located in the province of Cosenza in southern Italy. The contexts analyzed are an intermediate rural area (PSR 2014-2020), the municipality of Torano Castello and an urban area, the municipality of Cosenza. Figures 1 and 2 show the main settlement and morphological characteristics of the two Municipalities. In particular, the differences between the two municipalities are evident in terms of population density, diffusion and location of hydrogeological phenomena, as well as the different altimetry. The two municipalities are approximately 25 km apart as the crow flies and are associated with a similar climatological profile. According to OBC Transeuropa [140]

Vulnerability Domains
Below are the specific results obtained from the application of the proposed methodology to the two case studies for the assessment of the components of climate exposure, sensitivity and adaptive capacity, as well as for the development of the related local vulnerability maps. The choice of applying the same model to two areas that are characterized by a similar climatological situation, consistent settlement and morphological differences is aimed at investigating and emphasizing the influence of settlement development and land management models on vulnerability to climate change. In this regard, it is necessary to remember that the general objective proposed by the authors is to address the issue of climate change from an urban point of view, focusing subsequently on urban infrastructures in order to integrate the ordinary planning tools of mitigation and adaptation measures. In this sense, then, the comparison between the results obtained for the two study areas is interesting.

Vulnerability Domains
Below are the specific results obtained from the application of the proposed methodology to the two case studies for the assessment of the components of climate exposure, sensitivity and adaptive capacity, as well as for the development of the related local vulnerability maps.

Local Climate Profiles Assessment
The evaluation of the local climate profiles in accordance with the provisions of the proposed methodology allows identification of the factors of exposure to local climate change. The period 2010-2019 was chosen as the reference climatological period. Both Municipalities host measurement stations belonging to the Regional Environmental Protection Agency (region of Calabria) equipped with a thermometer and rain gauge. Figures 3 and 4 show the results obtained by processing the minimum and maximum daily temperature series and the cumulative daily precipitation series for the two case studies and normalizing the data with respect to the reference climatological period. methodology allows identification of the factors of exposure to local climate change. The period 2010-2019 was chosen as the reference climatological period. Both Municipalities host measurement stations belonging to the Regional Environmental Protection Agency (region of Calabria) equipped with a thermometer and rain gauge. Figures 3 and 4 show the results obtained by processing the minimum and maximum daily temperature series and the cumulative daily precipitation series for the two case studies and normalizing the data with respect to the reference climatological period.   methodology allows identification of the factors of exposure to local climate change. The period 2010-2019 was chosen as the reference climatological period. Both Municipalities host measurement stations belonging to the Regional Environmental Protection Agency (region of Calabria) equipped with a thermometer and rain gauge. Figures 3 and 4 show the results obtained by processing the minimum and maximum daily temperature series and the cumulative daily precipitation series for the two case studies and normalizing the data with respect to the reference climatological period.   From the comparison between the calculations obtained in the two case studies, on average, no differences are evident. In particular, the indicators of the heat and precipitation extremes show how the municipality of Torano Castello is characterized by a slightly warmer climate and a lower intense rainfall regime. The values of the synthetic index relating to climate exposure are equal to 0.48 for the municipality of Cosenza and 0.51 for the municipality of Torano Castello.

Local Sensitivity Profiles Assessment
The profiles of local sensitivity depend, in accordance with the proposed methodology, on elements that characterize the environmental capital, the social capital and the economic capital. In particular, the main sources of data retrieval are the representation of the Corine Land Cover [141] land use, which allows the definition of the occupation of the territories by artificial and natural surfaces, the local urban planning tools, the Hydrogeological Plan [141] and socioeconomic data, financial statements provided by the Italian National Statistics Institute [142]. Figures 5 and 6 show the results obtained for the two municipalities.
Sustainability 2020, 12, x FOR PEER REVIEW 14 of 26 From the comparison between the calculations obtained in the two case studies, on average, no differences are evident. In particular, the indicators of the heat and precipitation extremes show how the municipality of Torano Castello is characterized by a slightly warmer climate and a lower intense rainfall regime. The values of the synthetic index relating to climate exposure are equal to 0.48 for the municipality of Cosenza and 0.51 for the municipality of Torano Castello.

Local Sensitivity Profiles Assessment
The profiles of local sensitivity depend, in accordance with the proposed methodology, on elements that characterize the environmental capital, the social capital and the economic capital. In particular, the main sources of data retrieval are the representation of the Corine Land Cover [141] land use, which allows the definition of the occupation of the territories by artificial and natural surfaces, the local urban planning tools, the Hydrogeological Plan [141] and socioeconomic data, financial statements provided by the Italian National Statistics Institute [142]. Figures 5 and 6 show the results obtained for the two municipalities. Specifically, the municipality of Torano Castello is characterized from an environmental point of view by the minimal presence of artificial surfaces, which are essentially represented by residential areas. Much of the territory is occupied by wooded areas and semi-natural environments as well as by agroforestry and agricultural surfaces (arable land, annual and permanent crops). The territory is widely affected by flood risk areas near the stream and landslide risk areas, also near residential areas. The social and economic capital is characterized by a predominantly elderly population, an unemployment rate equal to 20.5% and values of the incidence of families with potential economic hardship growing from 1991 to 2011 with a value at the last census of 5.6 compared to the national value equal to 2.7. From an environmental point of view, the municipality of Cosenza is characterized by the presence of areas subject to landscape constraints, in particular architectural constraints and buildings of public interest in the historic center of the city, due to the presence of a large residential area located to the north and of an area mainly occupied by wooded territories and semi-natural environments as well as by agroforestry and agricultural surfaces in the south landslides. The social and economic capital is characterized by an unemployment rate of 19.3% and values of the incidence of families with potential economic hardship that has been growing since 2001 with a value at the last census of 4.6 compared to the national value of 2.7.

Local Adaptive Capacities Assessment
In order to evaluate the elements that influence the adaptive capacity of the territories, reference was made to the data provided by the Italian National Statistics Institute, municipal bodies, municipal planning tools and satellite images. Figures 7 and 8 show the results obtained. Specifically, the municipality of Torano Castello is characterized from an environmental point of view by the minimal presence of artificial surfaces, which are essentially represented by residential areas. Much of the territory is occupied by wooded areas and semi-natural environments as well as by agroforestry and agricultural surfaces (arable land, annual and permanent crops). The territory is widely affected by flood risk areas near the stream and landslide risk areas, also near residential areas. The social and economic capital is characterized by a predominantly elderly population, an unemployment rate equal to 20.5% and values of the incidence of families with potential economic hardship growing from 1991 to 2011 with a value at the last census of 5.6 compared to the national value equal to 2.7.
From an environmental point of view, the municipality of Cosenza is characterized by the presence of areas subject to landscape constraints, in particular architectural constraints and buildings of public interest in the historic center of the city, due to the presence of a large residential area located to the north and of an area mainly occupied by wooded territories and semi-natural environments as well as by agroforestry and agricultural surfaces in the south landslides. The social and economic capital is characterized by an unemployment rate of 19.3% and values of the incidence of families with potential economic hardship that has been growing since 2001 with a value at the last census of 4.6 compared to the national value of 2.7.

Local Adaptive Capacities Assessment
In order to evaluate the elements that influence the adaptive capacity of the territories, reference was made to the data provided by the Italian National Statistics Institute, municipal bodies, municipal planning tools and satellite images. Figures 7 and 8 show the results obtained.    The municipality of Cosenza shows an overall better adaptive capacity than the municipality of Torano Castello. All the selected indicators, with the exception of the presence of green areas in the urban area, support this result on average. In fact, although there are numerous and widespread examples of urban green areas in the urban area, these are included in the inhabited center with albeit positive effects but limited in terms of environmental and ecological parameters compared to the municipality of Torano Castello, which is characterized by a rural vocation. The municipality of Cosenza shows an overall better adaptive capacity than the municipality of Torano Castello. All the selected indicators, with the exception of the presence of green areas in the urban area, support this result on average. In fact, although there are numerous and widespread examples of urban green areas in the urban area, these are included in the inhabited center with albeit positive effects but limited in terms of environmental and ecological parameters compared to the municipality of Torano Castello, which is characterized by a rural vocation.

Vulnerability Maps Elaboration
In order to elaborate the vulnerability maps useful for identifying the priority intervention areas, in accordance with the methodology proposed for simplicity, the three components of climate exposure, sensitivity and adaptive capacity have not been weighted. Therefore, that reported in formula (4) was assumed.
w exp = w sens = w ad cap (4) This simplification is justified by the desire not to alter the consistency of one component with respect to the others. By the will of the authors, the procedure is characterized by being quick. The weight calculation should include further applications of statistic weighting methods such as conjoint analysis and scaling techniques.
The results obtained are shown in Figures 9 and 10. A more intense and widespread climatic vulnerability condition is evident with large areas of high and medium-high vulnerability in the case of the urban area of Cosenza, compared to the case of the rural area of Torano Castello.

. Vulnerability Maps Elaboration
In order to elaborate the vulnerability maps useful for identifying the priority intervention areas, in accordance with the methodology proposed for simplicity, the three components of climate exposure, sensitivity and adaptive capacity have not been weighted. Therefore, that reported in formula (4) was assumed.
This simplification is justified by the desire not to alter the consistency of one component with respect to the others. By the will of the authors, the procedure is characterized by being quick. The weight calculation should include further applications of statistic weighting methods such as conjoint analysis and scaling techniques.
The results obtained are shown in Figures 9 and 10. A more intense and widespread climatic vulnerability condition is evident with large areas of high and medium-high vulnerability in the case of the urban area of Cosenza, compared to the case of the rural area of Torano Castello.

. Vulnerability Maps Elaboration
In order to elaborate the vulnerability maps useful for identifying the priority intervention areas, in accordance with the methodology proposed for simplicity, the three components of climate exposure, sensitivity and adaptive capacity have not been weighted. Therefore, that reported in formula (4) was assumed.
This simplification is justified by the desire not to alter the consistency of one component with respect to the others. By the will of the authors, the procedure is characterized by being quick. The weight calculation should include further applications of statistic weighting methods such as conjoint analysis and scaling techniques.
The results obtained are shown in Figures 9 and 10. A more intense and widespread climatic vulnerability condition is evident with large areas of high and medium-high vulnerability in the case of the urban area of Cosenza, compared to the case of the rural area of Torano Castello.

Discussion
The proposed research, starting from the definition of the three vulnerability domains-climate exposure, sensitivity and adaptive capacity-evolves in the elaboration of vulnerability maps by starting a comparative analysis between different territorial contexts, in particular urban and rural ones. The mapping represents the reference for identifying urban infrastructures affected by conditions of greater vulnerability requiring the adoption of adequate mitigation and adaptation measures.
The development of vulnerability maps is a rather complex process for which it is necessary to discuss the working hypotheses proposed by the authors in relation to the vulnerability domains, especially in order to guide possible future research developments.
The climate exposure domain suggests, first of all, a reflection on the construction of the local climate profile. Important information could be deduced considering a climatological period longer than the 10 years considered and based on the forecasts provided by mathematical climate models to consider future climatic variability (climate projection) and not only on the recorded climatic variability. The aspects relating to exposure also highlight the significant problem of downscaling climate models that are currently set up for large territories, which in the case studies presented coincide with the municipal dimension. In fact, we were able to consider only one measurement station for each municipality. The support of specialized scientific expertise could provide local administrations with more specific and useful information at the sub-urban scale as well as on the reliability of the data.
Regarding the other two domains, sensitivity and adaptive capacity, general indicators were considered in this phase that could be satisfied by the information already present in the municipal cognitive frameworks, avoiding choosing indicators that are difficult to manage and compile. This concept inevitably refers to the need to update and increase the available data. For example, in assessing sensitivity, a more detailed survey could provide for the choice of specific indicators that give an indication of the types of areas and populations that could be most affected by a specific impact. Just as, as far as adaptive capacity is concerned, current adaptive capacity was considered to assess current vulnerability, considering future adaptive capacity, combined with future climate exposure, would allow the assessment of future vulnerability, thus orienting urban practices and policies in a more resilient way both in the construction phase of new infrastructures and in the transformation of existing ones.

Conclusions
This study addresses the issue of risks related to climate change, placing itself within the framework of the urban planning discipline. The authors support the integration of the mitigation and adaptation measures based on the assessment of local vulnerabilities that the effects of climate change suggest within the ordinariness of the tools and planning practices. Starting from this general assumption, the paper includes: -An examination of the scientific literature analyzed through a systematic literature review process useful for contextualizing the research topic addressed (Section 2); - The quantitative definition of the three vulnerability domains-climate exposure, sensitivity and adaptive capacity-as well as the process of synthesis and mapping of local vulnerability on the territory (Section 3); - The application of the proposed method on two case studies (Section 4).
The results presented show how urban planning, among the so-called relevant planning areas, represents a privileged field for understanding the level of local vulnerability, the expected impacts and, therefore, the priorities for action. The reconnaissance effort to integrate the three components of climate exposure, sensitivity and adaptive analysis recalls the centrality of governance. Urban settlements are the typical context in which the involvement of actors and resources is essential to jointly tackle similar issues. Therefore, the need to activate collaborations and coordination also emerges between competing competences and between institutional subjects in order to define systematic frameworks of mitigation and adaptation measures.
Similar approaches, both in terms of elaborating vulnerability maps and defining systematic frameworks of measures, are particularly useful for those territories that have not yet bridged the existing gap with more advanced regions that have long been measured with the issue of climate change from a strategic and regulatory point of view. For example, with reference to the national case, in Italy, there is no legislation on adaptation to climate change and, therefore, there are no specific objectives set or obligations for the regions to adopt a planning tool on this issue. Although the National Strategy for Adaptation to Climate Change was approved in 2015, which aims to outline a national vision and provide a framework for adaptation, the implementation translation of the strategy is slow in coming. The preparation of the National Plan for Adaptation to Climate Change has been undertaken but is still being approved. What we know is that the strategy encourages more effective cooperation between institutional actors at all levels (state, regions, municipalities) and promotes the identification of territorial and sectoral priorities. The proposed research is grounded in this context as the first step in addressing the need to integrate, pending sector regulations, the ordinary urban planning tools by looking positively at the issue of climate change as an opportunity for resilient development of territories, starting from the assessment of local climate vulnerability.