Applying Kano Two-Dimensional Quality Model to Build the Performance Evaluation Indicators of Long-Life High-Quality Condominiums

: Extending the life span of buildings and improving residential quality has been an important goal for creating residential environments with sustainable development over recent years. This study aims to establish the performance evaluation indicators of long-life high-quality condominiums in Taiwan areas. To identify the evaluation indicators, this study ﬁrst identiﬁed the users’ basic needs, and referred to comparative analysis of the house performance evaluation indicators in other countries. A questionnaire survey based on the Kano model was conducted to explore respondents’ satisfaction with evaluation indicators. Finally, three indicators, including “equipment pipeline maintenance available on each ﬂoor”, “maintenance plan”, and “site transportation routes”, were identiﬁed as the items of ﬁrst selection priority from the indicators. Four indicators, including “exposed equipment pipeline”, “site open space”, “water resource recycling”, and “expandability of interior space” are listed as obsolete items for the time being. The results of this study can be used as reference for the establishment of the performance evaluation indicators of long-life high-quality condominiums in Taiwan, as well as for the establishment of performance evaluation indicators for new residential buildings within the scope of the redevelopment plans of dangerous and old buildings in urban areas.


Introduction
According to data, the average life span of houses in the UK is approximately 140 years, approximately 103 years in the US, and approximately 80 years in Germany [1]. Chen et al. (2017) concluded that the average life span of buildings in Taiwan ranges from approximately 30 to 40 years, with reference to studies regarding the average life span of relevant buildings in Japan, which is significantly shorter than that in Western countries [2]. Considering the goal of sustainable development, providing long-life and sustainable buildings that use fewer resources and reduce CO 2 emission over the course of the building life cycle have become important building management strategies for all countries around the world.
A condominium is a type of building or complex, similar to apartments, but the building structure is divided into several units that are each separately owned, surrounded by common areas that are jointly owned. It is a common residential pattern in Asian urban areas. The residential environments of condominiums with high quality can meet the goal of sustainable development and satisfy basic living needs, thus becoming an important global development trend. The durable multi-unit housings must be constructed based on the principles of environmental protection, energy saving, and CO2 emission reduction, in order to prolong the life span of the building [3,4]. Responding to the aforementioned trend, the Ministry of Land, Infrastructure, Transport, and Tourism in Japan released the Act on the Promotion of Popularization of Long-Life Quality Housing (for condominiums)

Sustainable Development and Maslow's Hierarchy of Needs Theory
In 1987, the United Nations World Commission on Environment and Development released the report "Our Common Future", commonly called the Brundtland Report, which included the definitions of sustainable development [6,7]. Today, the core of mainstream sustainability thinking has become the idea of three dimensions, "environmental protection", "social sustainability", and "economic sustainability" [8]. Maslow (1943) divided human's basic needs into five hierarchies, in ascending order, physiological needs, safety needs, love and belongingness needs, esteem needs, and self-actualization needs [9]. In terms of how Maslow's theory might relate to the concept of sustainable development, the literature includes some discussion on the relationship. Parris and Kates' (2003) discussion of the requirement to satisfy basic human needs as part of a sustainability transition identifies hunger, equality, health, and education as basic needs to be satisfied, consistent with Maslow's theory [10]. Baqutayan et al. (2011) examined on how certain standards need to be encountered in housing for the societal wellbeing and then defined the need for affordable livable sustainable housing based on Maslow's theory [11]. Walsh (2010) believed that applying Maslow's theory to the examination of global sustainability has its merit [12].

Open Building Theory
The open building theory was proposed by Habraken (1961), who designed condominiums with a support system and infill system [13]. The support system refers to the structure section shared by residents, such as columns, beams, floor-slabs, and bearing walls. The infill system refers to the detachable parts within the several units of individual residents, such as partition wall, interior decoration, furniture, equipment pipeline, etc. [13]. The infill system for housing must be adaptable to the changing lifestyles of residents, and easily fitted and removed. Minami (2016) argued that the concept of open building will play an important role in Japan's future [1]. Kim and Hwang (2017) indicated that long-life housing is a housing type in preparation for changes in residential environments in the future; long-life housing certification is evaluated in accordance with the total scores from the evaluation of each performance, as based on the durability, flexibility (the support and infill is evaluated for variability), and maintainability in Korea [14,15]. With the development of information technology and construction methods, combining open building concepts with building information modeling (BIM) techniques can be feasible to resolve the problems of sustainable renovation of old existing housing buildings [16,17].

Evaluation Categories for Activation and Reutilization of Buildings
Langston et al. (2007) implemented analysis and evaluation on the reutilization potential of existing buildings, and proposed a set of architecture, which was referred to as the adaptive reuse potential (APR) model. The model can be used to evaluate the life span of buildings through physical, economic, social, technical, functional, and legal evaluation categories [5]. Conejos et al. (2013) evaluated the potential of the activation and reutilization of existing buildings through physical, economic, social, technical, functional, legal, and political evaluation categories [18]. Chen et al. (2017) examined the life span of buildings through physical, economic, social, technical, functional, policy evaluation categories, etc. The physical evaluation category includes the maintainability of equipment pipelines, durability and seismic performance of the structure; the economic and social evaluation category includes the distance between the building and public facilities, the width of roads adjacent to the site, city landscape, and open space; the technical evaluation category includes ventilation, noise insulation, water proofing, and day-lighting; the functional evaluation category includes space variance [2].

Comparative Analysis of Housing Performance Evaluation Indicators
A number of studies have developed and established evaluation indicators for housing performance evaluation. For example, the housing quality standards (HQS) established by U.S federal regulations offer a guide to what is required for safe, sanitary, and affordable housing. The housing quality assurance act (HQAA), developed by the Building Center of Japan in 2000, proposes nine indicators for housing quality: Structural safety, fire safety, deterioration mitigation, maintenance management, heat environment, air environment, light environment, noise environment, and facilities for elderly people [19]. After that, The Ministry of Land, Infrastructure, Transport, and Tourism in Japan promulgated the identification criterion of long-life quality housing (for condominiums) plan in 2009, and listed nine items, including "structure-degradation countermeasures", "seismic resistance", "ease of maintenance, management, and update", "variability", "the elderly countermeasures", "energy-saving countermeasures", "residential environment", "household area", and "maintenance and preservation plan", as the evaluation indicators of long-life quality housing [1]. The housing quality indicator (HQI) system measures the quality of housing schemes funded by the Homes and Communities Agency in the United Kingdom. At present, HQI consists of 10 items, including (1) location; (2) site-visual impact, layout, and landscaping; (3) site-open space; (4) site-routes and movement; (5) unit-size; (6) unit-layout; (7) unit-noise, light, services, and adaptability; (8) unit-accessibility within the unit; (9) unit-sustainability; (10) external environment-building for life [20]. The World Health Organization (WHO) also defines three major fields for housing-healthy indicators (HHI): Economy/use, comfort, and safety indicators [21].
The competent authorities of building at the central administration in Taiwan released the "Interim Implementation Measures for Housing Performance Evaluation" in December 2012, and has established eight items as housing performance evaluation indicators at present [22], including "structural safety", "fire safety", "barrier-free environment", "air environment", "light environment", "sound environment", "energy saving and water conservation", and "housing maintenance". However, appropriate evaluation criteria for the performance evaluation of long-life high-quality condominiums have not been established at present.

Kano Two-Dimensional Quality Attributes Model
In 1979, Kano and Takahashi introduced Herzberg's motivation-hygiene theory into quality-related fields, which furthered the relationship between the sufficient quality factors condition and user satisfaction by analogy. In 1984, Kano et al. further developed the Kano two-dimensional quality attributes model, and classified quality factors into five categories according to quality attribute, including attractive quality, one-dimensional quality, must-be quality, indifferent quality, and reverse quality attribute [23], as shown in Figure 1. The Kano model intends to analyze the internal needs of customers at the psychological level, as described below: • Attractive quality attribute (A): Customers will be satisfied when this quality attribute is sufficient, and may also accept when this quality attribute is insufficient.

•
One-dimensional quality attribute (O): Customers will be satisfied when this quality attribute is sufficient, and will be dissatisfied when this quality attribute is insufficient.

•
Must-be quality attribute (M): Customers will take it for granted, but will not be satisfied when this quality attribute is sufficient; will be dissatisfied when the quality attribute is insufficient. • Indifferent quality attribute (I): Customers will neither be satisfied nor dissatisfied when this quality attribute is sufficient or insufficient.

•
Reverse quality attribute (R): Customers will be dissatisfied when this quality attribute is sufficient, and will be satisfied when this quality attribute is insufficient [24].
Sustainability 2019, 11, x FOR PEER REVIEW 4 of 12 environment", "sound environment", "energy saving and water conservation", and "housing maintenance". However, appropriate evaluation criteria for the performance evaluation of long-life high-quality condominiums have not been established at present.

Kano Two-Dimensional Quality Attributes Model
In 1979, Kano and Takahashi introduced Herzberg's motivation-hygiene theory into qualityrelated fields, which furthered the relationship between the sufficient quality factors condition and user satisfaction by analogy. In 1984, Kano et al. further developed the Kano two-dimensional quality attributes model, and classified quality factors into five categories according to quality attribute, including attractive quality, one-dimensional quality, must-be quality, indifferent quality, and reverse quality attribute [24], as shown in Figure 1. The Kano model intends to analyze the internal needs of customers at the psychological level, as described below:


Attractive quality attribute (A): Customers will be satisfied when this quality attribute is sufficient, and may also accept when this quality attribute is insufficient.  One-dimensional quality attribute (O): Customers will be satisfied when this quality attribute is sufficient, and will be dissatisfied when this quality attribute is insufficient.  Must-be quality attribute (M): Customers will take it for granted, but will not be satisfied when this quality attribute is sufficient; will be dissatisfied when the quality attribute is insufficient.  Indifferent quality attribute (I): Customers will neither be satisfied nor dissatisfied when this quality attribute is sufficient or insufficient.  Reverse quality attribute (R): Customers will be dissatisfied when this quality attribute is sufficient, and will be satisfied when this quality attribute is insufficient [24].

Questionnaire Survey of Quality Attributes
Respondents' feeling to and satisfaction with the presence or absence of the quality items of products or services in the Kano questionnaire were identified as the basis for evaluating the Kano quality attributes. In terms of Kano two-dimensional quality attributes, respondents' feelings regarding the presence (positive) and absence (negative) of such qualities are divided into "I like it that way", "It must be that way", "I am neutral", "I can live with it that way", and "I dislike it that way", according to the positive and negative questions in the above questionnaire, and then, quality attributes are understood through cross validation (as shown in Table 1).

Questionnaire Survey of Quality Attributes
Respondents' feeling to and satisfaction with the presence or absence of the quality items of products or services in the Kano questionnaire were identified as the basis for evaluating the Kano quality attributes. In terms of Kano two-dimensional quality attributes, respondents' feelings regarding the presence (positive) and absence (negative) of such qualities are divided into "I like it that way", "It must be that way", "I am neutral", "I can live with it that way", and "I dislike it that way", according to the positive and negative questions in the above questionnaire, and then, quality attributes are understood through cross validation (as shown in Table 1). Note: Q, A, R, I, O, and M denote "Questionable", "Attractive", "Reverse", "Indifferent", "One-dimensional", and "must-be" attributes, respectively.

Customer Satisfaction Coefficient
Berger et al. (1993) proposed the customer satisfaction coefficient to explain the relationship between "quality attribute" and "customer satisfaction" [24]. The positive ICSC ranges from 0 to 1. The closer the value is to 1, the higher the influence on customer satisfaction. On the contrary, if the negative RCSC approaches −1, the influence on customer dissatisfaction is especially strong if the attribute of the product (or service) is not fulfilled [25].
Increasing customer satisfaction Reducing customer satisfaction

Evaluation Categories and Establishment of Evaluation Indicators
In this study, in order to establish the performance evaluation indicators of long-life high-quality condominiums that meet the goals of environmental protection, economic sustainability, and satisfying users' basic needs, evaluation categories were initially established based on the principle of sustainable development, Maslow's hierarchy of needs theory, and the open building theory (as shown in Table 2).
Second, evaluation indicators were established through comparative analysis of housing performance evaluation items in the UK and other countries (as shown in Table 2). In terms of the "physical" evaluation indicator category, (1) "exposed equipment pipeline", "equipment pipeline maintenance available on each floor", "maintenance plan", and "barrier-free environment" were identified as evaluation indicators, which intend that users' physiological needs can be satisfied by enhancing building maintenance management and providing facilities for mobility-impaired persons in the context of environmental protection and economic sustainability; (2) "structural durability", "structural safety", and "fire safety" were identified as evaluation indicators, which intend that users' "physiological and safety" needs can be satisfied by virtue of improving the durability and safety of buildings. In terms of the "economic and social" evaluation category, "site transportation routes", "site location", "building for community life", and "site open space" were identified as evaluation indicators, which intend that users' psychological needs of "love and belongingness" can be satisfied by site selection, and appropriate provision of transportation routes, community life, and open space in the context of economic and social sustainability. In terms of the "technical" evaluation category, "comfort of interior space", "comfort of interior physical environment", "daily energy saving", and "water resource recycling" were identified as evaluation indicators, which intend that users' psychological needs of "esteem" can be satisfied by the high-quality interior residential environment and proper Sustainability 2019, 11, 4046 6 of 12 energy saving measures in the context of environmental protection and economic sustainability. In terms of the "functional" evaluation category, "adaptability of interior space" and "expandability of interior space" were identified as evaluation indicators, which intend that interior space will enable users to develop abilities and implement flexible adjustment, and users' psychological needs of "self-actualization" can be satisfied in the context of economic sustainability.

Results
This section may be divided by subheadings. It should provide a concise and precise description of the experimental results, their interpretation, as well as the experimental conclusions that can be drawn. For the purpose of screening the evaluation indicators, in this study, a questionnaire survey of Kano two-dimensional quality attributes was conducted on 105 subjects. They have background in building-related industries, and interact with building users in Taipei City. Among the respondents, 42 persons are in real estate, 21 in architectural engineering, 18 in civil engineering, 6 in public administration, 5 in land development, 5 in electrical engineering, and 8 in other industries. The results of the questionnaire survey concerning the two-dimensional quality attributes of 17 evaluation indicators in this study were established and are described below.

Physical Evaluation Category
• Exposed equipment pipeline (No.1) evaluation indicator: This refers to the evaluation method regarding whether the equipment pipeline within a building is designed in the form of an "exposed pipeline", meaning that it is separated from the structure (as shown in Figure 2). This indicator was identified as a must-be quality attribute (as shown in Table 3) through statistics and analysis, indicating that customers will take it for granted, but will not be satisfied when the quality is sufficient, and will be dissatisfied when the quality is insufficient. • Equipment pipeline maintenance available on each floor (No.2) evaluation indicator: This refers to the evaluation method regarding whether appropriate manholes are provided at each floor within a building, in order to facilitate equipment pipeline (e.g., water and electricity pipelines) repair (as shown in Figure 2). The indicator was identified as a must-be quality attribute through statistics and analysis.
in building-related industries, and interact with building users in Taipei City. Among the respondents, 42 persons are in real estate, 21 in architectural engineering, 18 in civil engineering, 6 in public administration, 5 in land development, 5 in electrical engineering, and 8 in other industries. The results of the questionnaire survey concerning the two-dimensional quality attributes of 17 evaluation indicators in this study were established and are described below.

Physical Evaluation Category
 Exposed equipment pipeline (No.1) evaluation indicator: This refers to the evaluation method regarding whether the equipment pipeline within a building is designed in the form of an "exposed pipeline", meaning that it is separated from the structure (as shown in Figure 2). This indicator was identified as a must-be quality attribute (as shown in Table 3) through statistics and analysis, indicating that customers will take it for granted, but will not be satisfied when the quality is sufficient, and will be dissatisfied when the quality is insufficient.  Equipment pipeline maintenance available on each floor (No.2) evaluation indicator: This refers to the evaluation method regarding whether appropriate manholes are provided at each floor within a building, in order to facilitate equipment pipeline (e.g., water and electricity pipelines) repair (as shown in Figure 2). The indicator was identified as a must-be quality attribute through statistics and analysis. Structural safety (No.5) evaluation indicator: This refers to the evaluation method regarding whether the building structure can withstand specific seismic force and will not collapse, and whether the angle of displacement between floors above ground meets relevant requirements. The indicator was identified as a must-be quality attribute through statistics and analysis.  Fire safety (No.6) evaluation indicator: This refers to the evaluation method regarding whether the fire alarm, fire-fighting, evacuation, and fire spread prevention in a building meet relevant requirements. The indicator was identified as a must-be quality attribute through statistics and analysis. Structural safety (No.5) evaluation indicator: This refers to the evaluation method regarding whether the building structure can withstand specific seismic force and will not collapse, and whether the angle of displacement between floors above ground meets relevant requirements. The indicator was identified as a must-be quality attribute through statistics and analysis. • Fire safety (No.6) evaluation indicator: This refers to the evaluation method regarding whether the fire alarm, fire-fighting, evacuation, and fire spread prevention in a building meet relevant requirements. The indicator was identified as a must-be quality attribute through statistics and analysis. • Maintenance plan (No.7) evaluation indicator: This refers to the evaluation method regarding whether futurity is considered from the planning and design phase of a building, and a plan has been developed for inspection and repair. The indicator was identified as a one-dimensional quality attribute through statistics and analysis, indicating that customers will be satisfied when the quality is sufficient and dissatisfied when the quality is insufficient.

Functional Evaluation Category
• Adaptability of interior space (No.16) evaluation indicator: This refers to the evaluation method regarding whether interior sound insulation of the building can be adjusted appropriately according to the users' life style. The indicator was identified as an attractive quality attribute through statistics and analysis. It is a quality attribute that customers will be satisfied when the quality is sufficient, but may also accept when the quality is insufficient. • Expandability of interior space (No.17) evaluation indicator: This refers to the evaluation method regarding whether the exterior wall of the building can be adjusted appropriately according to the users' life style. The indicator was identified as an indifferent quality attribute through statistics and analysis.

Questionnaire Survey of Evaluation Indicators
The results of questionnaire survey concerning the two-dimensional quality attributes of 17 evaluation indicators in this study were calculated according to equations for "increasing customer satisfaction coefficient" and "reducing customer dissatisfaction coefficient". The statistical results are shown in Table 3.  Berger et al. (1993) established the quality improvement matrix according to the average value of "increasing customer satisfaction coefficient" and "reducing customer dissatisfaction coefficient"; customer satisfaction with products or services can be improved and customer dissatisfaction can be reduced through screening of the evaluation indicators. In order to screen the performance evaluation indicators of long-life high-quality condominiums, in this study, a quality improvement matrix was established, as based on the average value of increasing customer satisfaction coefficient and reducing customer dissatisfaction coefficient, as shown in Figure 3.
Increasing customer satisfaction coefficient and reducing customer dissatisfaction coefficient of equipment pipeline maintenance available on each floor (No.2), maintenance plan (No.7), site transportation routes (No.8), and other evaluation indicators are above the average value, and all such indicators are within the first quadrant of the quality improvement matrix, as shown in Figure 3. It is shown that among all evaluation indicators, the above-listed three indicators can make above-average-level contributions to increasing customer satisfaction and reducing customer dissatisfaction; therefore, they are items of first priority in selection. Reducing customer dissatisfaction coefficient of barrier-free environment (No.3), structural durability (No.4), structural safety (No.5), fire safety (No.6), and other indicators is above the average value (−0.58), and all such indicators are within the second quadrant of the quality improvement matrix, as shown in Figure 3.
Increasing customer satisfaction coefficient" of site location (No.9), building for community life (No.10), comfort of interior space (No12), comfort of interior physical environment (No. 13), daily energy saving (No.14), adaptability of interior space (No. 16), and other indicators are above the average value (0.50), and all such indicators are within the fourth quadrant of the quality improvement matrix. Increasing customer satisfaction coefficient and reducing customer dissatisfaction coefficient of exposed equipment pipeline (No.1), site open space (No.11), water resource recycling (N.15), expandability of interior space (No.17), and other indicators are below the average value, and all such indicators are within the third quadrant of the quality attribute matrix. In the questionnaire survey, some respondents thought that No.1, the design of exposed equipment pipeline, will lead to a decrease in the interior usable area in accordance with current acts and regulations in Taiwan; No.11 will cause a problem in residential space management, because open space on site must be available for the general public, in accordance with current acts and regulations in Taiwan; in terms of No.15, it will lead to poor cost effectiveness in water resource recycling due to the relatively low water price in Taiwan at present; in terms of No.17, change to the exterior wall of apartments must be approved at the meeting of the unit owners in accordance with current acts and regulations in Taiwan; hence, it is difficult to make changes.
In view of the above, at the present stage, the relevant acts and systems in Taiwan must be improved and the concept of sustainable development for the public must be reinforced if recognition is to be obtained. As a result, the four evaluation indicators above can be listed as obsolete items for the time being. Increasing customer satisfaction coefficient" of site location (No.9), building for community life (No.10), comfort of interior space (No12), comfort of interior physical environment (No. 13), daily energy saving (No.14), adaptability of interior space (No. 16), and other indicators are above the average value (0.50), and all such indicators are within the fourth quadrant of the quality improvement matrix. Increasing customer satisfaction coefficient and reducing customer dissatisfaction coefficient of exposed equipment pipeline (No.1), site open space (No.11), water resource recycling (N.15), expandability of interior space (No.17), and other indicators are below the average value, and all such indicators are within the third quadrant of the quality attribute matrix. In the questionnaire survey, some respondents thought that No.1, the design of exposed equipment pipeline, will lead to a decrease in the interior usable area in accordance with current acts and regulations in Taiwan; No.11 will cause a problem in residential space management, because open space on site must be available for the general public, in accordance with current acts and regulations in Taiwan; in terms of No.15, it will lead to poor cost effectiveness in water resource recycling due to the relatively low water price in Taiwan at present; in terms of No.17, change to the exterior wall of apartments must be approved at the meeting of the unit owners in accordance with current acts and regulations in Taiwan; hence, it is difficult to make changes.
In view of the above, at the present stage, the relevant acts and systems in Taiwan must be improved and the concept of sustainable development for the public must be reinforced if recognition is to be obtained. As a result, the four evaluation indicators above can be listed as obsolete items for the time being.

Conclusions
Condominiums are a common residential pattern in Asian urban areas. This study identified the performance evaluation indicators of long-life high-quality condominiums that satisfy the goal of sustainable development and meet the basic needs of users in terms of physical, economic, social, technical, and functional evaluation categories. A questionnaire survey was conducted to understand the respondents' satisfaction with evaluation indicators using the Kano two-dimensional quality model. Thirteen evaluation indicators from 17 items were identified based on quality improvement matrix analysis.
In terms of the "physical" category, six indicators, excluding the "maintenance plan", were recognized as must-be quality attributes; in terms of the "economic and social" category, all three

Conclusions
Condominiums are a common residential pattern in Asian urban areas. This study identified the performance evaluation indicators of long-life high-quality condominiums that satisfy the goal of sustainable development and meet the basic needs of users in terms of physical, economic, social, technical, and functional evaluation categories. A questionnaire survey was conducted to understand the respondents' satisfaction with evaluation indicators using the Kano two-dimensional quality model. Thirteen evaluation indicators from 17 items were identified based on quality improvement matrix analysis.
In terms of the "physical" category, six indicators, excluding the "maintenance plan", were recognized as must-be quality attributes; in terms of the "economic and social" category, all three indicators were recognized as one-dimensional quality attributes; in terms of the "technical" category, all three indicators were recognized as one-dimensional quality attributes; in terms of the "functional" category, one indicator was identified as an attractive quality attributes. The above survey results show that users' physiological, safety, and social needs (including love and belongingness, esteem, and self-actualization needs, etc.) at the higher hierarchy will be generated upon the satisfaction of users' physiological and safety needs. The quality attributes of evaluation indicators also gradually transformed from must-be quality to one-dimensional and attractive quality attributes. In order to satisfy users' basic needs, among the above evaluation indicators, but excluding "equipment pipeline maintenance available on each floor", "maintenance plan", and "site transportation routes", which were the three items of the first priority in selection, the other 10 indicators should be included in items of priority in selection. In terms of "exposed equipment pipeline", "site open space", "water resource recycling", and "expandability of interior space", both "increasing customer satisfaction coefficient" and "reducing customer dissatisfaction coefficient" are below the average value.
Taiwan's government is positively promoting the massive construction of public and social housing, as well as enacting the regulations on accelerating the redevelopment of urban dangerous and old buildings. The concepts of these thirteen indicators in this study have been incorporated into the current building codes in Taiwan as the major design principles for future public housing and urban renewal projects. For example, equipment pipeline maintenance available on each floor and the emphasis on structural durability will become the mainstream for the future building design (currently more than 65% of buildings' pipelines such as drainage are embedded in the concrete in Taiwan, which may cause structural damage while renovation and also reduce structural strength). In other words, the effect of long-life high-quality condominiums has been functioned and its influence on the industrial change is expected. However, due to time constraints, it is recommended to implement continuous studies on the evaluation framework, evaluation standards, evaluation organization, and incentives, in order that the performance evaluation indicators of long-life high-quality condominiums in Taiwan will be further improved.