Integration between GIS and Multi-Criteria Analysis for Ecosystem Services Assessment : A Methodological Proposal for the National Park of Cilento , Vallo di Diano and Alburni ( Italy )

Ecosystem services play a fundamental role in society; their characteristics and the production of their natural generated capital are fundamental elements in the functioning of the support system of life on Earth. The loss of ecosystem services contributes to food and energy uncertainty, increases vulnerability to natural disasters, such as floods or tropical storms, decreases the level of health, reduces the availability and quality of water resources and affects cultural heritage. This study has conducted a quantitative estimate of ecosystem services and their evaluation for a wide, complex and sensitive area: The National Park of Cilento, Vallo di Diano and Alburni, in Southern Italy. The assessment has been undertaken via a preliminary, partial evaluation model and further through the TOPSIS method. Research results have led to a scenario highlighting a dualism on the territory shaped by the differences between internal and coastal areas, defining themselves as complementary and necessary to each other. To improve the sustainable use of territorial resources, it is necessary to adopt policies and strategies from those that are available, always taking into account any possible conflict between conservation and development.


Ecosystem Services Approaches
It is well known that ecosystems provide humankind with several benefits called "ecosystem services".They can be understood as the direct and indirect contribution of ecosystems to human well-being [1,2].
Services produced by ecosystems include, food, water, fuels and timber for example.They include water supply and air purification, natural waste recycling, soil formation, pollination and many other natural regulatory mechanisms.
The Millennium Ecosystem Assessment has defined ecosystem services as multiple benefits provided by ecosystems to humankind and distinguishes four categories [3]: (1) Supporting life: These functions collect all the services necessary for the production of all other ecosystem services and contribute to the conservation (in situ) of biological and genetic diversity, and evolutionary processes.
ecosystem services at 50 billion euros.According to this report, if the current scenario remains unchanged, in terms of the loss of just terrestrial biodiversity by 2050, the cost would be equal to 7% of GDP, with a substantial loss in the services provided by marine ecosystems.The report contains recommendations, such as the adoption of measures to end environmentally harmful subsidies and the creation of "markets" for ecosystem services.
In Italy, it is also possible to start a quantitative ecological analysis, not only for the mapping and quantification of these services, but also to set up an economic evaluation of them, with specific reference to biodiversity.
In a study published in the journal Ecological Indicators [9], based on expert opinions and the so-called "benefit transfer" method, it was estimated that each year, Italian ecosystems provide benefits (goods and services) worth € 71.3 billion.The most interesting result of the study was not the absolute figure, as the dynamics of losses or gains that are occurring in the Italian provinces are due to the change in land use.In just 10 years (between 1990 and 2000), some provinces lost 7.5% of the buffer capacity of damaging events (with intense rainfall, these provinces will have more damage from hydrogeological instability) and 9.5% of the assimilation of pollutants (being equal emissions, e.g., dusty, these areas will have longer permanence of pollutants, with greater damage to human health and the environment.)In the Italian context, ecosystem services have, in the past, mainly been protected by regulatory tools.They are also placed on other economic instruments, including market instruments, even if we are far from having found a balance and, above all, a consistency in the application of an appropriate mix of instruments.In Italy, according to an ISPRA study, an Institute of the Ministry of the Environment [10], the loss of biodiversity and ecosystem services is currently recognised as a risk factor for the transmission of bacterial, viral and parasitic diseases to humans, livestock, crops and animal and plant wildlife.The forest area is increasing, and the number of fires is decreasing.If a portion of Italian territory re-appropriates hectares of forest, another landslide will endanger lives and human activities; here are 5708 (equal to 70.5% of the total) Italian municipalities affected by subsidence and landslides, so appropriate policies, approaches and tools are necessary to increase the sustainable use of natural resources.

Ecosystem Services Assessment
It often happens that decision makers do not have sufficient spatially defined information [11] regarding certain themes, such as ecosystem services, and their assessment.The approach of ecosystem services, the multiple benefits provided by nature to humankind, makes it possible to determine a balanced evaluation of environmental, economic, ecological and social resources [12].In this context, the conservation of nature can be defined as the protection of the natural wealth of the landscape [13].Ecological assessments allow the support of decision-making processes related to the conservation of natural capital, in that they make possible the identification of the areas in which the adoption of conservative approaches is a priority, thus, allowing the creation of a useful link between ecological and spatial planning [14].In this perspective, it is necessary to experiment with tools that, used in synergistic optics, are able to generate win-win solutions.In the past decade, research on mapping ecosystem services has grown substantially, with a focus on modelling them, in particular, through initiatives such as the Natural Capital Project and the Ecosystem Services Partnership.This increased interest has led to the inclusion of ecosystem services not only in conservation policies but also in the business sector [15].
Several approaches have been developed with the aim of mapping ecosystem services.One of them derives information directly from maps of land use and land cover or from habitat maps [16,17].Another common approach is based on the study of ecosystem services values through spatially explicit maps [4].Furthermore, there are also more recent approaches based on biological data and finally, integrated approaches; for example, those developed by the Natural Capital approach through the InVEST tool [18].
It is necessary to analyze the landscape structure and its land uses to represent the spatial distribution of ecosystems and the services they provide, with the aim of ensuring the survival of species and nature conservation [19].Indeed, the natural capital of a territory is a crucial component for social welfare and economic development.Knowing the distribution of such assets, in terms of ecosystem services, allows the definition and identification of the most compatible uses linked to natural resources, together with management strategies, to ensure the conservation and increase of these resources.The evaluation of the supply and demand for ecosystem services can then raise awareness in the decision-making phase [20], selecting those actions that can ensure the conservation of the local natural capital, thus, avoiding unexpected consequences [21].
Therefore, in recent years the amount of research on the concept and evaluation of ecosystem services has grown [22,23].From the sustainable design of modern cities to the environmental impact assessment of projects, addressing the concept of ecosystem services has become fundamental in predicting how changes in land use can affect the distribution of land resources [24][25][26][27][28].In particular, various methods have been proposed for the mapping and qualitative, quantitative and monetary evaluation of ecosystem services.There are several types of instruments: Some are aimed at biophysical, some economic, and others mixed.Another distinction is relative to the global or local reference scale and to the spatially explicit representation of ecological values and biophysical parameters.The following is a quick review of the most significant assessment tools: • ARIES (Artificial Intelligence for Ecosystem Services) is a project established with the aim of providing an assessment of ecosystem services useful for the understanding and quantification of environmental assets and factors that influence their values, for specific geographical areas and according to user needs and priorities [29].It is a web-based, open-source technology, offered to users all over the world, capable of coding ecological and socio-economic knowledge to map the provision of ecosystem services, including scenario assessment and economic evaluation.

•
SolVES (Social Values for Ecosystem Services) is a tool designed to evaluate, map and quantify social values perceived, in particular, of a cultural type, such as aesthetics and recreation [30].
The aim is to provide a tool for public decision-makers and researchers to assess the social value of ecosystems and to facilitate discussions among various stakeholders regarding the trade-offs between the different management options in a variety of contexts, physical and social, ranging from forest or pastures to coasts and seas.

•
TESSA (Toolkit for Ecosystem Service Site-Based Assessments) is a manual for the analysis of ecosystem services [31].It provides practical guidance on how to identify significant ecosystem services in an area, and what data is needed to measure them.It also describes which sources or methods to use to find them and how to communicate results to stakeholders.The manual places particular emphasis on the importance of comparing the results of alternative scenarios to fully understand the consequences of different choices.In drafting the method, the guideline combines simplicity and functionality with communication with decision-makers.The model excludes some aspects related to the concept of ecosystem services in order to be accessible to non-experts, but at the same time provides solid information.It does not provide maps, nor is it applicable on different scales.[18].It can measure, estimate and map the potential of ecosystems in the provision of goods and services that humans receive.The purpose of InVEST is to support decision-makers in the evaluation of trade-offs associated with various policy options, and in identifying areas where investments in ecosystem services can improve human development and ecosystem conservation.The outputs provided, in fact, describe the natural resources in terms of biophysical supply, services that benefit human beings and a projection of their socio-economic value.The outputs, therefore, provide a framework for governments, companies, conservation organizations and other bodies to assess the impact of their decisions on the environment and on human wellbeing.
However, in spite of the new approaches and available tools, in Italy, the assessment of ecosystem services has not yet been inserted within the planning and management processes of the territory [32] in a structured way, except for some example virtuosos and experiments already underway [33,34].Reticence and operational difficulties persist, such as insufficient data for territorial analyses.It should be added that, in Italy, territory planning is often too fragmented by a division of responsibilities between subjects, administrative levels and sectors of government that prevent an organic vision, which is essential to determine the changes that involve the environment and the health of biodiversity in an integrated way.
Therefore, in order to offer technicians and decision-makers a tool that supports territorial planning, or policies (at different levels of scale) that can be easy to use, an approach has been trialed using a widespread open-source software and versatile, that is QGIS.The data actually available for the territorial context in question was considered and a Geographical Information System (GIS) was constructed containing the supply and demand data for the different categories of ecosystem services, and for the municipal areas of the National Park of Cilento, Vallo di Diano and Alburni, located in Southern Italy.Moreover, using a VectorMCDA plugin of QGIS developed by the Environmental Laboratory of the University of Perugia [35], partial assessments of each ecosystem service could be agreed to obtain summary maps (with regard to supply services, regulation services and cultural heritage) for the various municipalities of the Park.
In particular, the VectorMCDA plugin contains seven algorithms that refer to many multi-criteria evaluation methods [36] and, in this case, taking into account the quantitative nature of the available data, the TOPSIS method was used (Technique for Order of Preference by Similarity to Ideal Solution), explained by the "geo-TOPSIS" algorithm.The maps obtained highlight the areas in which the demand for ecosystem services, and those in which deficits are highlighted, are best met.Therefore, it has been possible to deduce the services to be increased or protected in order to activate management policies suitable for the territory, which are, therefore, effective for stimulating the supply of these ecosystem services.
The use of the geo-TOPSIS algorithm has already been successfully tested in other territorial classification contexts [37,38], as well as the integration between GIS and multi-criteria evaluation systems and methods, has proven particularly useful in the evaluation of "landscape services" inside the National Park of Cilento, Vallo di Diano and Alburni [39].

Study Area
The study area is the National Park of Cilento, Vallo di Diano and Alburni (NPCVDA) (Figure 1), the second most extended Italian park comprised of 181.048 hectares.It lies within the administrative limits of the Campania Region and, in particular, of the Province of Salerno.Due to its particular characteristics, the Cilento sub-region represents one of the most important Italian bio-geographical complexes.
The peculiar geographic position of the protected natural area, comprising of coasts, water courses and the mountain massifs, give the territory a variegated orography expressed in a remarkable variety and complexity of environments.The park was administratively established in 1991; its territory includes 80 municipalities and 15 contiguous areas.
In 1997, just a few years after its establishment, NPCVDA was unanimously included in the prestigious network of UNESCO biosphere reserves of the MAB Programme (Man and Biosphere).The inscription into the MAB network, with the creation of the Park Biosphere Reserve, also brings an interesting novelty to the panorama of Italian protected areas, identifying specific areas of conservation located within the perimeter of a widely extended area.The entire park region, following the application of the MAB-UNESCO program directives, has been assumed to be of trans-national and global importance since a "pact" was stipulated as a priority to guarantee and safeguard the connections among different ecosystems, characterizing the concept of "network".Biodiversity conservation is recognised as of universal value and, to this end, NPCVDA acts as a "laboratory of life" in relation to its vast biological heritage.It is an eminent and representative example of the ecological and biological process of the Mediterranean ecosystems, enclosed in just one park, a community of plants and animals ranging from marine forms to terrestrial, arid, semiarid, Nordic, Atlantic, Asian, hill and high mountainous areas.With its intact coasts rich in caves and inlets, its mountains characterized by karst phenomena, and in the richness of unique endemic plant species, it represents an area not only of natural beauty but also of exceptional scientific importance.
NPCVDA also has extraordinary cultural values: In 1998, together with the archaeological sites of Paestum and Velia and the Padula Certosa, the park was included in the world heritage list, as a "cultural landscape".The outstanding universal value of the site results from the combined work of Nature and Man, thereby falling within the subcategory of evolutionary landscapes.In fact, the natural assets reached their shape through a combination of historical, social, economic, artistic and spiritual events.
Moreover, together with Soria in Spain, Koroni in Greece and Chefchaouen in Morocco, the NPCVDA belongs to the sites of the so-called Mediterranean Diet, inscribed in the UNESCO intangible cultural heritage list since November 2010.
Finally, it is part of the European network of UNESCO Geoparks, embracing relevant geological sites of particular importance in terms of scientific quality, rarity, aesthetic relevance and their archaeological, naturalistic, historical and cultural interest.Over millennia, Cilento has been continuously inhabited; in fact, there is evidences of settlements dating back 25,000 years.
NPCVDA is the only Mediterranean protected area to hold simultaneous status' as a National Park, inserted in World Network of Biosphere Reserves and declared a World Heritage Site.The main conservation objective that the park is required to pursue is the conservation of biodiversity, playing an important role in developing awareness of the relationship between conservation and development.However, at the same time, man-nature synergy is one of the most exclusive aspects of the park and among the most complex relationships to protect and manage too.

Data Sources and Approach
Territory analyses were built on a DEM (Digital Elevation Model) cartography downloaded from the National Geoportal site with a 75 m resolution [40], on which the information extracted from the PTR (the territorial regional plan of Campania Region) has been overlaid [41].The data for the elaboration of the thematic maps of each ecosystem service has been researched in several websites, such as ISTAT (Italian National Statistical Institute) for socio-economic data [42][43][44]; INEA (Italian Biodiversity conservation is recognised as of universal value and, to this end, NPCVDA acts as a "laboratory of life" in relation to its vast biological heritage.It is an eminent and representative example of the ecological and biological process of the Mediterranean ecosystems, enclosed in just one park, a community of plants and animals ranging from marine forms to terrestrial, arid, semi-arid, Nordic, Atlantic, Asian, hill and high mountainous areas.With its intact coasts rich in caves and inlets, its mountains characterized by karst phenomena, and in the richness of unique endemic plant species, it represents an area not only of natural beauty but also of exceptional scientific importance.
NPCVDA also has extraordinary cultural values: In 1998, together with the archaeological sites of Paestum and Velia and the Padula Certosa, the park was included in the world heritage list, as a "cultural landscape".The outstanding universal value of the site results from the combined work of Nature and Man, thereby falling within the subcategory of evolutionary landscapes.In fact, the natural assets reached their shape through a combination of historical, social, economic, artistic and spiritual events.
Moreover, together with Soria in Spain, Koroni in Greece and Chefchaouen in Morocco, the NPCVDA belongs to the sites of the so-called Mediterranean Diet, inscribed in the UNESCO intangible cultural heritage list since November 2010.
Finally, it is part of the European network of UNESCO Geoparks, embracing relevant geological sites of particular importance in terms of scientific quality, rarity, aesthetic relevance and their archaeological, naturalistic, historical and cultural interest.Over millennia, Cilento has been continuously inhabited; in fact, there is evidences of settlements dating back 25,000 years.
NPCVDA is the only Mediterranean protected area to hold simultaneous status' as a National Park, inserted in World Network of Biosphere Reserves and declared a World Heritage Site.The main conservation objective that the park is required to pursue is the conservation of biodiversity, playing an important role in developing awareness of the relationship between conservation and development.However, at the same time, man-nature synergy is one of the most exclusive aspects of the park and among the most complex relationships to protect and manage too.

Data Sources and Approach
Territory analyses were built on a DEM (Digital Elevation Model) cartography downloaded from the National Geoportal site with a 75 m resolution [40], on which the information extracted from the PTR (the territorial regional plan of Campania Region) has been overlaid [41].The data for the elaboration of the thematic maps of each ecosystem service has been researched in several websites, such as ISTAT (Italian National Statistical Institute) for socio-economic data [42][43][44]; INEA (Italian National Institute for Agricultural Economy) for the coefficients and calculation indices [45]; Campania Region for specific elements mapping; PTA (Campania Region Water Protection Plan) for data on water quality [46]; ISPRA (Higher Institute for Environmental Protection and Research); INFC (National Inventory of the Forests) [47]; Revenue Agency for economic estimation data [48]; Life+ MGN (Making Good Natura) [49].Having collected territorial data on ecosystem services-divided into provision services, regulation services and cultural values-we have estimated supply and demand, then obtained an evaluation for each ecosystem service by calculating the ratio between them ("partial evaluation").This ratio has been divided into five classes of satisfaction for each municipality of the park ("phase one").Subsequently, all the ratios obtained-i.e., for each ecosystem service and for each municipality-have been analyzed with the TOPSIS method in QGIS.The graphic restitution of the evaluation of ecosystem services is highlighted by color gradations: The municipalities that approach the ideal point and that, therefore, better satisfy the offer of the ecosystem service taken into consideration ("phase two"), are in green.The results obtained suggest intervention strategies to stimulate the supply of ecosystem services.The adopted methodological approach is shown in Figure 2. Campania Region for specific elements mapping; PTA (Campania Region Water Protection Plan) for data on water quality [46]; ISPRA (Higher Institute for Environmental Protection and Research); INFC (National Inventory of the Forests) [47]; Revenue Agency for economic estimation data [48]; Life+ MGN (Making Good Natura) [49].Having collected territorial data on ecosystem servicesdivided into provision services, regulation services and cultural values-we have estimated supply and demand, then obtained an evaluation for each ecosystem service by calculating the ratio between them ("partial evaluation").This ratio has been divided into five classes of satisfaction for each municipality of the park ("phase one").Subsequently, all the ratios obtained-i.e., for each ecosystem service and for each municipality-have been analyzed with the TOPSIS method in QGIS.The graphic restitution of the evaluation of ecosystem services is highlighted by color gradations: The municipalities that approach the ideal point and that, therefore, better satisfy the offer of the ecosystem service taken into consideration ("phase two"), are in green.The results obtained suggest intervention strategies to stimulate the supply of ecosystem services.The adopted methodological approach is shown in Figure 2.

Phase One: Partial Assessment of Ecosystem Services
The scarce data availability concerning the territory under examination, allowed the analysis of only some of the ecosystem services for each category (C) which, in turn, contains sub-categories.

Phase One: Partial Assessment of Ecosystem Services
The scarce data availability concerning the territory under examination, allowed the analysis of only some of the ecosystem services for each category (C) which, in turn, contains sub-categories.
The examined categories are the following: • C1.Provision: Crops, fodder and pasture, wood and fibers, non-wood forest products, water.• C2.Regulation: CO 2 sequestration, water purification, air purification.

•
C3. Cultural values: Maps of concentration of environmental, cultural, recreational assets and food and wine peculiarities.
For each of the ecosystem services sub-categories, an initial partial evaluation was carried out by assessing the environment's provision of the service and the demand from consumers based on the available data.The aim was to create comparable maps to obtain an overall assessment and propose solutions, strategies and policies to protect, enhance or increase the supply of ecosystem services.
Once the maps concerning the estimate of supply and demand had been realized, the partial evaluation of ecosystem services from the ratio obtained through the calculation of the division of the QGIS field calculator was derived.It was obtained from the determination of 5 classes of ecosystem service satisfaction where values are included from 0 to 25 (when the service is "low"), from 26 to 50 (when the service is "medium-low"), from 51 to 75 (when the service is "medium"), from 76 to 100 (when it is "medium-high"), and finally more than 100 when the service is classed as "high".The graphic restitution of the partial evaluation is a semaphore gradient that goes from the best condition (indicated in green) to the worst (indicated in red).

Phase Two: Assessment by GeoTOPSIS (Tool of QGIS Software)
The multi-criteria analysis is a Decision Support System (DSS) or a wide range of systems, tools and technologies to support the decision-maker in the decision-making process and constitutes useful tools for the evaluation of different alternative options (both with reference to the ex-ante phase and the ex-post phase), consisting of policies, programmes, plans or projects.The multi-criteria analysis family includes different methods and techniques developed in the different sectors and with reference to concrete cases to help decision-makers.
The TOPSIS (Technique for Order Preference by Similarity to Ideal Solution) method is part of the branch of multi-criteria analysis [50][51][52].This method takes the basic concept that the preferable option that should have (in Euclidean space) the "shortest distance" from the "ideal solution" and the "greater distance" from the "non-ideal solution".Note that the concept of "distance" could be interpreted in various ways, but the TOPSIS uses geometric interpretation, i.e., referring to the Euclidean distance.The criterion of the Euclidean distance was then used to evaluate the relative proximity of the offers to the final solution, and the final order of options preference is obtained by comparing these relative distances.
The software used for the entire project was QGIS, which allows data from different sources to be merged into a single territory analysis.Data, split into layers, can be analyzed and the ensuing image map is created with the thematism that can be customized by the user and eventually complies with typical GIS analyses, such as color gradation, color gradient and unique value.Icons and labels can enrich the map depending on the attributes of the cartographic elements; moreover, data can be dynamically projected, and the tools can be recalled by QGIS to be applied to the project data.
In our specific case, after processing the partial evaluation of ecosystem services, the values generated were entered into the QGIS software and reprocessed using the geoTOPSIS tool, which, at the end of the process, renders the values of the distances from the ideal point, overall, for each theme and for each NPCVDA municipality.The geoTOPSIS tool belongs to the vectorMCDA category, which is a QGIS plugin that uses different MCDA (multi-criteria decision analysis) algorithms to perform a multi-criteria analysis in a GIS framework.It is assumed that each geographical object described by an alphanumeric record constitutes a geographic alternative (geo-alternative) described by the indicators reported in the "attribute table" (Figure 3).
Each column refers to the respective column of the attributes table of the analyzed file that, in our case, take on the function of "criteria", while the line marked with "weights" identifies the weights assigned to each criterion.The mode of insertion can be direct or indirect.Likewise, the line labelled "preference" allows the qualification of each criterion as "gain" (the greater the value that is assumed and the greater the preference) or "cost" (the greater the value assumed and the lower the preference).The "ideal point" line, on the other hand, identifies the target value assigned to a given criterion: In other words, it is the optimal value the decision maker favors.By default, this parameter coincides with the maximum value of the criterion under examination (if "gain" type) or at the minimum value (if "cost" type).On the contrary, the line with the "worst point" label proposes the minimum value in the case of "gain" type criteria and the maximum value in the "cost" type criteria.The user can enter different values to the default, assuming, for example, better targets than those achieved by the alternatives in question, or values indicated by laws (Figure 4).Therefore, every single module of the plugin analyzes the descriptive attributes of a geo-alternative, treating them as evaluation criteria, processes them according to the implemented algorithms, and returns the synthetic indexes of preference by adding a column to the attribute table (Figure 5).The outputs are represented by thematic maps and alphanumeric graphical data.achieved by the alternatives in question, or values indicated by laws (Figure 4).Therefore, every single module of the plugin analyzes the descriptive attributes of a geo-alternative, treating them as evaluation criteria, processes them according to the implemented algorithms, and returns the synthetic indexes of preference by adding a column to the attribute table (Figure 5).The outputs are represented by thematic maps and alphanumeric graphical data.In building this theme, the following subcategories have been individually evaluated: Grains,  In building this theme, the following subcategories have been individually evaluated: Grains, cereals (soft wheat, durum wheat, barley, oats, sorghum, corn grain), citrus groves (lemon, orange), orchards (apple, pear, peach), vineyards (table grapes and wine grapes), fig trees, chestnut trees, olive groves, vegetable cultivations in full air (artichoke, lettuce, chicory, endive, cabbage, turnip, radish, chard, spinach, melon, pumpkin, watermelon, cucumber, basil, bean, string bean, pea, broad bean, onion, garlic, asparagus, bell pepper, tomato, eggplant, potato, celery, carrot, fennel, parsley).

Results from Phase
The estimate of the supply (Figure 6a) of food products was obtained through the average productivity of the agricultural area, calculated through the average production yields for each type of cultivation [53].The estimate of the demand (Figure 6b) was quantified on the basis of average per capita food consumption, multiplied by the resident population of each municipality of the reference site.Once we reached the results of the two previous estimates, we proceeded with the partial evaluation (Figure 6c) of the ecosystem service through the ratio between supply and demand and their subsequent conversion in percent.For example:  Supply quantification (Figure 7a) was calculated by multiplying the hectares of forage or grazing area and a reference coefficient expressed in forage unit on hectare (FU) [54].The reference crops are waxy corn, other herbaceous monophyte grasslands, alfalfa, permanent meadows, lean pastures, other pastures.The demand (Figure 7b) corresponds to the average livestock consumption per head of livestock, estimated using an average annual factor of FU per animal by type of animal consumer.For example:
In addition, in this case, we proceeded with the partial evaluation (Figure 7c) of the ecosystem service through the ratio between supply and demand.

C1.2-Forage and Pasture
Supply quantification (Figure 7a) was calculated by multiplying the hectares of forage or grazing area and a reference coefficient expressed in forage unit on hectare (FU) [54].The reference crops are waxy corn, other herbaceous monophyte grasslands, alfalfa, permanent meadows, lean pastures, other pastures.The demand (Figure 7b) corresponds to the average livestock consumption per head of livestock, estimated using an average annual factor of FU per animal by type of animal consumer.For example:
In addition, in this case, we proceeded with the partial evaluation (Figure 7c) of the ecosystem service through the ratio between supply and demand.
of livestock, estimated using an average annual factor of FU per animal by type of animal consumer.For example:
In addition, in this case, we proceeded with the partial evaluation (Figure 7c) of the ecosystem service through the ratio between supply and demand.

C1.3-Wood and Fibers
To estimate the wood supply (Figure 8a) by the territory the quota of woody, phytomass has been calculated; that is, the plant mass expressed in tons on hectares of the vegetation that covers a site.The reference data for estimating the forest area is Corine Land Cover (2012) [55], in which an increase coefficient of the specific phytomass to each class of forest cover type is attributed.To estimate the demand (Figure 8b), on the other hand, the average consumption for each municipality has been considered as the reference value, using a coefficient classified according to the size of the inhabited centre and the number of dwellings.For example:

C1.3-Wood and Fibers
To estimate the wood supply (Figure 8a) by the territory the quota of woody, phytomass has been calculated; that is, the plant mass expressed in tons on hectares of the vegetation that covers a site.The reference data for estimating the forest area is Corine Land Cover (2012) [55], in which an increase coefficient of the specific phytomass to each class of forest cover type is attributed.To estimate the demand (Figure 8b), on the other hand, the average consumption for each municipality has been considered as the reference value, using a coefficient classified according to the size of the inhabited centre and the number of dwellings.For example:
Figure 8c shows the evaluation for this theme.Figure 8c shows the evaluation for this theme.

C1.4-Non-Wood Forest Products
The estimate of the mushroom production (Figure 9a) has been calculated on the basis of the wooded surface of the Corine Land Cover cartography multiplied by an average annual production coefficient of 1.5 kg/ha [18].The types of woods considered are the following: Woods with a prevalence of holm oak and/or cork oak; woods with a prevalence of deciduous oaks (turkey oak and/or oak); mixed woods with a prevalence of mesophilic broad-leaved trees and mesothermophilic (maple-ash, hornbeam-black-ash); forests with a prevalence of chestnut; forests with a prevalence of beech; woods with a prevalence of mountain and Mediterranean pines (black pine and larch, sylvan pine, loricate pine); mixed woods of conifers and broadleaves with a prevalence of holm oak and/or cork oak); mixed woods of conifers and broad-leaved trees, mostly of deciduous oaks; mixed woods of conifers and broad-leaved trees with a prevalence of mesophilic and mesothermophilic hardwoods; mixed woods of conifers and broad-leaved trees with a prevalence of chestnut; mixed woods of conifers and broad-leaved trees with a prevalence of beech; and, mixed woods of conifers and broad-leaved trees with a prevalence of mountain pines and Mediterranean or oak.For example:

C1.4-Non-Wood Forest Products
The estimate of the mushroom production (Figure 9a) has been calculated on the basis of the wooded surface of the Corine Land Cover cartography multiplied by an average annual production coefficient of 1.5 kg/ha [18].The types of woods considered are the following: Woods with a prevalence of holm oak and/or cork oak; woods with a prevalence of deciduous oaks (turkey oak and/or oak); mixed woods with a prevalence of mesophilic broad-leaved trees and mesothermophilic (maple-ash, hornbeam-black-ash); forests with a prevalence of chestnut; forests with a prevalence of beech; woods with a prevalence of mountain and Mediterranean pines (black pine and larch, sylvan pine, loricate pine); mixed woods of conifers and broadleaves with a prevalence of holm oak and/or cork oak); mixed woods of conifers and broad-leaved trees, mostly of deciduous oaks; mixed woods of conifers and broad-leaved trees with a prevalence of mesophilic and mesothermophilic hardwoods; mixed woods of conifers and broad-leaved trees with a prevalence of chestnut; mixed woods of conifers and broad-leaved trees with a prevalence of beech; and, mixed woods of conifers and broad-leaved trees with a prevalence of mountain pines and Mediterranean or oak.For example:
Figure 9b shows the demand, and Figure 9c the evaluation, for this theme.
coefficient of 1.5 kg/ha [18].The types of woods considered are the following: Woods with a prevalence of holm oak and/or cork oak; woods with a prevalence of deciduous oaks (turkey oak and/or oak); mixed woods with a prevalence of mesophilic broad-leaved trees and mesothermophilic (maple-ash, hornbeam-black-ash); forests with a prevalence of chestnut; forests with a prevalence of beech; woods with a prevalence of mountain and Mediterranean pines (black pine and larch, sylvan pine, loricate pine); mixed woods of conifers and broadleaves with a prevalence of holm oak and/or cork oak); mixed woods of conifers and broad-leaved trees, mostly of deciduous oaks; mixed woods of conifers and broad-leaved trees with a prevalence of mesophilic and mesothermophilic hardwoods; mixed woods of conifers and broad-leaved trees with a prevalence of chestnut; mixed woods of conifers and broad-leaved trees with a prevalence of beech; and, mixed woods of conifers and broad-leaved trees with a prevalence of mountain pines and Mediterranean or oak.For example: • Woods' average yield (kg/Ha) = 1.5; • Average consumption (gr/per capita) = 800.
Figure 9b shows the demand, and Figure 9c the evaluation, for this theme.

C1.5-Water
The evaluation (Figure 10a) of the water has been divided into: Drinking water and irrigation water.In regard to drinking water, the supply estimate is based on the amount of water collected for drinking by sources within the municipalities.The springs are captured by the water consortia or by the municipalities themselves.The estimate of the demand (Figure 10b) corresponds to the consumption of drinking water by each municipality; that is, to the water introduced into the municipal aqueduct with reference to the year 2012, which is the most recent year for which data is available [56].
Regarding irrigation water, the supply estimate is based on the amount of water collected for irrigation from the sources within the municipalities.The estimate of the irrigation water demand, i.e., the irrigation needs for the agricultural land use classes, was calculated based on the average requirements (cubic meter/ha) estimated by INEA.Example of drinking water in the Ceraso Municipality:
Figure 10c shows the evaluation for this theme.

C1.5-Water
The evaluation (Figure 10a) of the water has been divided into: Drinking water and irrigation water.In regard to drinking water, the supply estimate is based on the amount of water collected for drinking by sources within the municipalities.The springs are captured by the water consortia or by the municipalities themselves.The estimate of the demand (Figure 10b) corresponds to the consumption of drinking water by each municipality; that is, to the water introduced into the municipal aqueduct with reference to the year 2012, which is the most recent year for which data is available [56].
Regarding irrigation water, the supply estimate is based on the amount of water collected for irrigation from the sources within the municipalities.The estimate of the irrigation water demand, i.e., the irrigation needs for the agricultural land use classes, was calculated based on the average requirements (cubic meter/ha) estimated by INEA.Example of drinking water in the Ceraso Municipality:
Figure 10c shows the evaluation for this theme.The partial assessment of CO2 sequestration was divided into stock (carbon storage) and process

C2.1-CO 2 Sequestration
The partial assessment of CO 2 sequestration was divided into stock (carbon storage) and process (carbon sequestration).The stock (or carbon storage) was calculated on the basis of the average epigeal mass (stems, big branches, stumps) per hectare (by forest type).This method (Figure 11a) consists of an adaptation of the one used in the National Carbon Accounting [57] that was based on the IPCC (Intergovernmental Panel on Climate Change) methodology, considering three of the five forest reservoirs (epigeal mass, hypogeum mass and litter).Contributions from forest and dead biomass soil have not been considered as significantly dependent on forest management.The phytomass was converted into carbon considering a generalized carbon/phytomass ratio (0.5).To quantify the stock (tons of carbon fixed by the forest in the site) the following data by INFC have been used [58]: The formula is the following: where: tC = tons of carbon set by the forest; Σ t = summation by forest type t; a t,i = area of forest type t for site i; EP t,r = EP for forest type t for region r; RS t = RS for forest type t; LE t = LE for forest type t.
The estimate of the demand (Figure 11b) was quantified on the basis of the per capita production of CO 2 estimated by ISPRA and disseminated on the ISTAT website.This figure includes gas emissions called Land Use, Land Use Change and Forestry (LULUCF), resulting from land use, land use change and forest management.By contrast, emissions from maritime cruise traffic, flight emissions from aircraft, gas and oil extraction plants in the sea were excluded from the calculation.In Campania region, in which NPCVDA lies, the production is 3.7 t/ha.
Regarding the process (or carbon sequestration), instead, the estimate of the supply has been developed for the epigeal component of the forests only, as there is no data of volumetric expansion of the roots nor of the carbon stored in the ground or in the litter.Therefore, the data relative to the current increase was used, according to the arboreal phytomass present for each forest type, differentiated by region.The phytomass was converted into carbon by considering a generalized carbon/phytomass ratio (0.5) and a fresh weight/dry weight ratio specific for forest type.For the quantification of the process (forest carbon tons per year, per site) the following INFC data has been used:

•
Incr: Current increment of epigean tree volume per hectare, by region and by forest type; • BEF: Biomass Expansion Factor (epigeal biomass/growing stock); • WBD: Basal density of wood dry weight/fresh weight (tons/cubic meters).
The formula is the following: where: tCa = tons of carbon per year; Σ t = summation by forest type t; Incr t,r = Incr for forest type t for region r; a t,i = area of forest type t for site i; BEF t = BEF for forest type t; WBDt = WBD for forest type t.
Figure 11c shows the evaluation for this theme.

C2.2-Water Purification
The estimate of the supply (Figure 12a) is based on the abatement (absorption) capacity of the civil and agricultural nitrates by the river ecosystem.
For the purification of water from civilian spills (Figure 12b), the watercourses and the relative riparian belt were considered in which the purifiers or, in the absence of them, the sewers discharge the waste water.
For the abatement of agricultural nitrogen, only watercourses falling into agricultural areas were considered, intersecting the regional hydrographical network with the Cartography of Agricultural Use of Soils provided by Campania Region [59].
The estimate of the demand refers to the demographic and agricultural nitrogen spills reported in the Campania Region Water Protection Plan (2007).Figure 12c shows the evaluation for this theme.

C2.3-Air Purification
The pollutant considered is PM10; to calculate the supply (Figure 13a) or storage of this particulate by the vegetation the information provided by Corine Land Cover (2012) was used, calculating an average coefficient of annual capture by type of vegetation covering the soil.The demand (Figure 13b) corresponds to the total emissions of particulates from all the sources that can be linked to human activity, such as combustion processes (in combustion engines, in heating

C2.2-Water Purification
The estimate of the supply (Figure 12a) is based on the abatement (absorption) capacity of the civil and agricultural nitrates by the river ecosystem.

C2.2-Water Purification
The estimate of the supply (Figure 12a) is based on the abatement (absorption) capacity of the civil and agricultural nitrates by the river ecosystem.
For the purification of water from civilian spills (Figure 12b), the watercourses and the relative riparian belt were considered in which the purifiers or, in the absence of them, the sewers discharge the waste water.
For the abatement of agricultural nitrogen, only watercourses falling into agricultural areas were considered, intersecting the regional hydrographical network with the Cartography of Agricultural Use of Soils provided by Campania Region [59].
The estimate of the demand refers to the demographic and agricultural nitrogen spills reported in the Campania Region Water Protection Plan (2007).Figure 12c shows the evaluation for this theme.

C2.3-Air Purification
The pollutant considered is PM10; to calculate the supply (Figure 13a) or storage of this particulate by the vegetation the information provided by Corine Land Cover (2012) was used, calculating an average coefficient of annual capture by type of vegetation covering the soil.The demand (Figure 13b) corresponds to the total emissions of particulates from all the sources that can be linked to human activity, such as combustion processes (in combustion engines, in heating systems, in many industry activities, incinerators and thermal power plants), brakes, asphalt, or natural springs, such as soil erosion, volcanic eruption, forest fires, pollen dispersal and sea salt.It is For the purification of water from civilian spills (Figure 12b), the watercourses and the relative riparian belt were considered in which the purifiers or, in the absence of them, the sewers discharge the waste water.
For the abatement of agricultural nitrogen, only watercourses falling into agricultural areas were considered, intersecting the regional hydrographical network with the Cartography of Agricultural Use of Soils provided by Campania Region [59].
The estimate of the demand refers to the demographic and agricultural nitrogen spills reported in the Campania Region Water Protection Plan (2007).Figure 12c shows the evaluation for this theme.

C2.3-Air Purification
The pollutant considered is PM 10 ; to calculate the supply (Figure 13a) or storage of this particulate by the vegetation the information provided by Corine Land Cover (2012) was used, calculating an average coefficient of annual capture by type of vegetation covering the soil.The demand (Figure 13b) corresponds to the total emissions of particulates from all the sources that can be linked to human activity, such as combustion processes (in combustion engines, in heating systems, in many industry activities, incinerators and thermal power plants), brakes, asphalt, or natural springs, such as soil erosion, volcanic eruption, forest fires, pollen dispersal and sea salt.It is calculated by means of a regional normalized population coefficient, corresponding to 0.002 tons/per capita multiplied by the inhabitants of each municipality of the examined site.Example: • PM 10 sequestration per class of Corine Land Cover: Broadleaf 1.6 t/ha; • PM 10 emissions: 0.002 t/per capita.
Figure 13c shows the evaluation for this theme.Figure 13c shows the evaluation for this theme.For the estimation of the ecosystem service of cultural values, unlike the other services, an elementary quantification of the elements present in the area has been used, and these are classified in precise and areal, generating thematic maps of concentration.The area elements were first translated into percentage area within the municipality, then onto a scale from 0% to 100%.They were normalized on a scale from 0 to 1, while the punctual elements were directly normalized on the basis of the minimum value and maximum of the total cartographic elements.The themes were recreational goods (Figure 14a), cultural heritage (Figure 14b), food and wine peculiarities (Figure 14c), and environmental goods (Figure 14d).

Results from Phase Two: GeoTOPSIS
The TOPSIS method (Figures 15-17) allows the mapping of the satisfaction of the demand for ecosystem services on the Cilento territory: They can be presented for each proposed theme.In particular, through color gradations, the graphic restitution of ecosystem services assessment shows the municipalities and, more generally, the areas approaching the ideal point taken as 1 on a scale of normalization that goes from 0 to 1 and, therefore, in this specific case, meets the offer of the ecosystem service analyzed to be most suitable.
For example, for the theme of agriculture and crops, the municipalities expressed with the darkest color gradation are Aquara and Prignano Cilento but, in general, the most positive trend is found in the hilly area, given the conspicuous distribution of agricultural land for olive groves and vineyards.The lighter colors represent the municipalities located, for the most part, on the mountainous areas and the Sele and Vallo di Diano plains also have a significantly higher population For the estimation of the ecosystem service of cultural values, unlike the other services, an elementary quantification of the elements present in the area has been used, and these are classified in precise and areal, generating thematic maps of concentration.The area elements were first translated into percentage area within the municipality, then onto a scale from 0% to 100%.They were normalized on a scale from 0 to 1, while the punctual elements were directly normalized on the basis of the minimum value and maximum of the total cartographic elements.The themes were recreational goods (Figure 14a), cultural heritage (Figure 14b), food and wine peculiarities (Figure 14c), and environmental goods (Figure 14d).

Results from Phase Two: GeoTOPSIS
The TOPSIS method (Figures 15-17) allows the mapping of the satisfaction of the demand for ecosystem services on the Cilento territory: They can be presented for each proposed theme.In particular, through color gradations, the graphic restitution of ecosystem services assessment shows the municipalities and, more generally, the areas approaching the ideal point taken as 1 on a scale of normalization that goes from 0 to 1 and, therefore, in this specific case, meets the offer of the ecosystem service analyzed to be most suitable.
For example, for the theme of agriculture and crops, the municipalities expressed with the darkest color gradation are Aquara and Prignano Cilento but, in general, the most positive trend is found in the hilly area, given the conspicuous distribution of agricultural land for olive groves and vineyards.The lighter colors represent the municipalities located, for the most part, on the mountainous areas and the Sele and Vallo di Diano plains also have a significantly higher population density.The ecosystem service with the maximum negativity is fodder and pasture, with all values equal to 0.  Apart from the cultural values, where the positive situation is spread over almost the whole territory focusing on the coastal and mountain range, all the other ecosystem services are satisfactory, especially the municipalities falling within the internal areas classified by ISTAT (Italian National Statistical Institute).This tends to shape a situation of dualism between coastal areas and inland areas, in line with the national trend, addressing a substantial positive perspective for internal areas through this assessment.In fact, these are the spearhead of many ecosystem services, especially concerning climate regulation, water cycles and air purification.
Starting from this assessment, it is possible to ascertain the services to be increased or protected to activate management policies suitable for the territory, which consider the conflicts between the ecosystem services and are, therefore, effective for stimulating the supply of these ecosystem services.Apart from the cultural values, where the positive situation is spread over almost the whole territory focusing on the coastal and mountain range, all the other ecosystem services are satisfactory, especially the municipalities falling within the internal areas classified by ISTAT (Italian National Statistical Institute).This tends to shape a situation of dualism between coastal areas and inland areas, in line with the national trend, addressing a substantial positive perspective for internal areas through this assessment.In fact, these are the spearhead of many ecosystem services, especially concerning climate regulation, water cycles and air purification.
Starting from this assessment, it is possible to ascertain the services to be increased or protected to activate management policies suitable for the territory, which consider the conflicts between the ecosystem services and are, therefore, effective for stimulating the supply of these ecosystem services.

How to Stimulate the Offer of Ecosystem Services
Based on the known classification proposed by Bemelmans-Videc et al. in 1998 [60], market regulation can be divided into three groups of instruments: Carrots, sticks and sermons (Figure 18).These are tools to promote the provision of environmental services.Over the last decades, there has been a significant shift of attention from the regulatory, general and binding instruments for the various economic subjects involved (sticks), to the tools based on incentives and compensation (carrots) and, more recently, to initiatives for accession voluntary activities linked to the creation of new markets.This transformation can be understood in light of the greater effectiveness and efficiency of these instruments compared to those of regulation, but also in relation to the current trend of considering that the creation of new markets, accompanied by a pro-active role of companies and civil society, represents an innovative and extremely promising form of intervention in the field of supply policies for public or common services, and in particular those concerning the environment.

How to Stimulate the Offer of Ecosystem Services
Based on the known classification proposed by Bemelmans-Videc et al. in 1998 [60], market regulation can be divided into three groups of instruments: Carrots, sticks and sermons (Figure 18).These are tools to promote the provision of environmental services.Over the last decades, there has been a significant shift of attention from the regulatory, general and binding instruments for the various economic subjects involved (sticks), to the tools based on incentives and compensation (carrots) and, more recently, to initiatives for accession voluntary activities linked to the creation of new markets.This transformation can be understood in light of the greater effectiveness and efficiency of these instruments compared to those of regulation, but also in relation to the current trend of considering that the creation of new markets, accompanied by a pro-active role of companies and civil society, represents an innovative and extremely promising form of intervention in the field of supply policies for public or common services, and in particular those concerning the environment.

Payment for Ecosystem Services
Among the tools associated with creating new markets, increasing attention is given to tools such as Payments for Ecosystem (or Environmental) Services (PES).PES comprises of tools created to stimulate the production of positive environmental externalities, turning them into real products that can be sold on the market.PES schemes link two parts-a seller and a buyer-through a voluntary contract.In reality, the number of actors involved often requires the function of mediation of a third party, such as a technical agency, an association, a public authority or a single professional, to which the contracting parties delegate the management contract and control of the effective provision of the environmental service and of the economic relations between users and producers [61].In order to create contracts for PES, according to Wunder [62], five conditions have to be met: (1) The identification of a well-defined environmental service to be exchanged, (2) the presence of at least one buyer and (3) at least one seller, (4) the voluntariness between the parties to market an environmental service and finally (5), the conditionality of the payment, according to which the producer is obliged to act actively to ensure the environmental service over time (a single exchange, in fact, is not sufficient for the formation of a real market for the service, which is the end of a PES mechanism).

Payment for Ecosystem Services
Among the tools associated with creating new markets, increasing attention is given to tools such as Payments for Ecosystem (or Environmental) Services (PES).PES comprises of tools created to stimulate the production of positive environmental externalities, turning them into real products that can be sold on the market.PES schemes link two parts-a seller and a buyer-through a voluntary contract.In reality, the number of actors involved often requires the function of mediation of a third party, such as a technical agency, an association, a public authority or a single professional, to which the contracting parties delegate the management contract and control of the effective provision of the environmental service and of the economic relations between users and producers [61].In order to create contracts for PES, according to Wunder [62], five conditions have to be met: (1) The identification of a well-defined environmental service to be exchanged, (2) the presence of at least one buyer and (3) at least one seller, (4) the voluntariness between the parties to market an environmental service and finally (5), the conditionality of the payment, according to which the producer is obliged to act actively to ensure the environmental service over time (a single exchange, in fact, is not sufficient for the formation of a real market for the service, which is the end of a PES mechanism).

Community Agricultural Policy
Greening, which pursues environmental goals, has been strongly desired by the European Commission.Member States must reserve a 30% share of national resources on direct aid Community Agricultural Policy (CAP), which for Italy amounts to about 1.1 billion euro a year.It follows that greening farmers in possession of the new PAC rights (assigned to 15 May 2015), will receive a payment per hectare that will be added to the basic payment, partly recovering the initial cut which is expected, as mentioned, to be equal to 45%, compared to that perceived in 2014.Italy has decided to apply the greening proportionally to the value of the basic premium, to the extent of about 60% of the latter.Faced with the recognition of a specific aid, farmers are asked for three greening commitments: The diversification of arable land, the maintenance of permanent forage crops and the creation of ecological focus areas.In this regard, it is emphasized that the obligations arising from the green payment do not apply to permanent crops and tree crops, but only to arable land.In addition, they do not apply to farms operating under organic farming, because they are already considered adequate from an environmental point of view, while perceiving the payment of greening.It affects the arable land with the following obligations: Up to 10 hectares, no obligation of diversification; from 10 to 30 hectares, an obligation of at least two different crops, with the main crop's maximum coverage of 75% of the arable land area; over 30 hectares, an obligation of at least three different crops, with the main crop's maximum coverage of 75% of the area and the two main crops that can cover a maximum of 95% of the arable land area.Therefore, at least 5% of the area must be reserved for the third crop.For example, a company with 50 hectares will have to guarantee at least three crops, the first will not exceed 37.5 ha (75%), the first two will not have to exceed 47.5 ha together (95%), then the third will they must assign at least 2.5 ha (5%).This does not mean that the producer could devote 33.3% of the arable land area to each crop, in an indistinct way.

Landscape Labelling
Horizontal labelling is a new concept of PES that seeks to combine elements of PES with product certification on a landscape scale.Landscape labelling proposes that rural landscapes that provide valuable ecosystem services get a landscape label, whereby products derived from this landscape could be differentiated and highly appraised in the global market.One of the main objectives of landscape labelling is to provide benefits to communities, rather than to individual landowners, based on the continued provision of ecosystem services evaluated on a landscape scale, rather than on a private property scale.In this way, landscape labelling also seeks to overcome some of the current challenges, including the assessment of opportunity costs and the provision of ecosystem services, high transaction costs, difficulty in ensuring cross-compliance and a limited inclination that leads to an unfair distribution of benefits.As such, landscape labelling would provide incentive management to continue meeting the cocoa and rubber ecosystem service criteria offering opportunities for landscape labelling implementation that is specifically aimed at encouraging small landowners within a landscape mosaic.As such, landscape labelling would provide incentive management to continue meeting the criteria of the ecosystem service required for certification.The label, with its associated conditionality criteria, could act as a mechanism for securing additional payments for ecosystem services, which, as part of a landscape certification scheme, would be delivered to community-based organizations for economic and social projects.This could benefit from a wider range of people than possible in the current PES model.

Conclusions
As previously stated, NPCVDA has a large extension (almost five times the average size of the European parks), but also has a very high resident population inside (about 230,000 units living in the 80 municipalities of the park, with an average density of 80 inhabitants per km 2 ) which makes it a particularly significant case of a heavily anthropized protected area.This intense anthropization (with respect to the density normally found in a protected area) determines a complex network of social-economic relations that varies across the territory and is mostly organized, with rare exceptions, in aggregates of small and medium-sized settlements.
The settlement and productive distributions show considerable divergence between a very anthropized coastal strip linked to tourist presences and an extensive internal area dependent on a particularly complex geographic conformation based on socio-economic and cultural systems closely linked to predominantly rural models.
NPCVDA is a territory in which historical, social, economic and artistic needs have historically overlapped, which has reached its current form in association and response to its natural environment.
Agricultural activities, which have largely affected the Cilentan territory, have not eliminated the biological potentialities in terms of biodiversity, but have determined agroforested and semi-natural ecosystems of notable landscape value.
Therefore, assessment of ecosystem services provides support to public decision-makers in identifying actions that can be implemented in the conservation of habitats and species that generate ecosystem services.Moreover, it is functional to the identification and quantification of the economic and social benefits deriving from it.In particular, regarding our case study, the internal areas of the National Park of Cilento, Vallo di Diano and Alburni, as strong ecosystem services producers, need policies that are careful to contain the very high trend of depopulation.Coastal areas, with their strong summer tourist flows, could offset the disparities in the production of ecosystem services with a payment that could act as an incentive for the mitigation of the depopulation trend of the internal areas.
A suitable management plan of the environment passes necessarily through the integration of ecological, economic and socio-political elements within an interdisciplinary framework [63].For this reason, evaluations of ecosystem services are an important and essential tool for territory knowledge.They could enrich municipal or wide area urban plans, which always seems too subjective and not very feasible from the point of view of landscape and environment protection.

Figure 3 .
Figure 3. Attribute tables of alphanumeric data.Figure 3. Attribute tables of alphanumeric data.

Figure 3 .
Figure 3. Attribute tables of alphanumeric data.Figure 3. Attribute tables of alphanumeric data.

Figure 3 .
Figure 3. Attribute tables of alphanumeric data.

Figure 5 .
Figure 5. Attributes table with the geoTOPSIS results.

Figure 6 .
Figure 6.Example of estimation of supply (a), demand (b) and partial evaluation (c) for crops.C1.2-Forage and Pasture

Figure 6 .
Figure 6.Example of estimation of supply (a), demand (b) and partial evaluation (c) for crops.

Figure 7 .
Figure 7. Example of estimation of supply (a), demand (b) and partial evaluation (c) for forage and pasture.

Figure 7 .
Figure 7. Example of estimation of supply (a), demand (b) and partial evaluation (c) for forage and pasture.

Figure 8 .
Figure 8. Example of estimation of supply (a), demand (b) and partial evaluation (c) for wood and fibers.

Figure 8 .
Figure 8. Example of estimation of supply (a), demand (b) and partial evaluation (c) for wood and fibers.

Figure 9 .
Figure 9. Example of estimation of supply (a), demand (b) and partial evaluation (c) for non-wood forest products.

Figure 9 .
Figure 9. Example of estimation of supply (a), demand (b) and partial evaluation (c) for non-wood forest products.

Figure 10 .
Figure 10.Example of estimation of supply (a), demand (b) and partial evaluation (c) for water.

Sustainability 2018 , 25 Figure 11 .
Figure 11.Example of estimation of supply (a), of demand (b) and the partial evaluation (c) for CO2 sequestration.

Figure 12 .
Figure 12.Example of estimation of supply (a), demand (b) and partial evaluation (c) for water purification.

Figure 11 .
Figure 11.Example of estimation of supply (a), of demand (b) and the partial evaluation (c) for CO 2 sequestration.

Sustainability 2018 , 25 Figure 11 .
Figure 11.Example of estimation of supply (a), of demand (b) and the partial evaluation (c) for CO2 sequestration.

Figure 12 .
Figure 12.Example of estimation of supply (a), demand (b) and partial evaluation (c) for water purification.

Figure 12 .
Figure 12.Example of estimation of supply (a), demand (b) and partial evaluation (c) for water purification.

Sustainability 2018 ,
10, x FOR PEER REVIEW 16 of 25 calculated by means of a regional normalized population coefficient, corresponding to 0.002 tons/per capita multiplied by the inhabitants of each municipality of the examined site.Example: • PM10 sequestration per class of Corine Land Cover: Broadleaf 1.6 t/ha; • PM10 emissions: 0.002 t/per capita.

Figure 13 .
Figure 13.Example of estimation of supply (a), demand (b) and partial evaluation (c) for air purification.

•
InVEST (Integrated Valuation of Ecosystems Services and Tradeoffs) is an open-source technology developed by Stanford University (in collaboration with The Nature Conservancy and World Wildlife Fund) within the Natural Capital Project Epigeal phytomass (trunks, thick branches, branches) per hectare, region and forest type; • RS: Root/shoot ratio, that converts the epigeal biomass into underground biomass; • LE: Litter's carbon-epigeal mass' carbon per hectare, that converts the epigeal biomass into litter.