The Different Strategies for the Radiolabeling of [211At]-Astatinated Radiopharmaceuticals

Astatine-211 (211At) has emerged as a promising radionuclide for targeted alpha therapy of cancer by virtue of its favorable nuclear properties. However, the limited in vivo stability of 211At-labeled radiopharmaceuticals remains a major challenge. This review provides a comprehensive overview of the current strategies for 211At radiolabeling, including nucleophilic and electrophilic substitution reactions, as well as the recent advances in the development of novel bifunctional coupling agents and labeling approaches to enhance the stability of 211At-labeled compounds. The preclinical and clinical applications of 211At-labeled radiopharmaceuticals, including small molecules, peptides, and antibodies, are also discussed. Looking forward, the identification of new molecular targets, the optimization of 211At production and quality control methods, and the continued evaluation of 211At-labeled radiopharmaceuticals in preclinical and clinical settings will be the key to realizing the full potential of 211At-based targeted alpha therapy. With the growing interest and investment in this field, 211At-labeled radiopharmaceuticals are poised to play an increasingly important role in future cancer treatment.


Introduction
Targeted radionuclide therapy (TRT) employing alpha-emitting isotopes combined with disease-specific targeting vectors is favorable as it delivers a highly concentrated dose to a tumor site, either directly to the tumor cells or to its micro-environment, while concurrently reducing harm to the healthy surrounding tissues [1,2].Given this potential, the development of alpha-emitting radiopharmaceuticals for targeted alpha therapy (TAT) is a vibrant field of investigation in both academia and commercial research worldwide.Several candidate isotopes for TAT are being evaluated in clinical and preclinical settings, including 223Ra, 225Ac, 227 Th, 213 Bi, 212 Bi, 212 Pb, 211 At, 149 Tb, and 224 Ra.For instance, the first alpha-particle emitter, Xofigo ( 223 RaCl 2 ) approved by the Food and Drug Administration (FDA) in 2013 is a calcium-mimetic isotope that is incorporated into sites of increased bone turnover and osteoblastic activity [3,4].Targeted 225 Ac and 227 Th conjugates, unlike 223 Ra, signify a novel class of therapeutic radiopharmaceuticals for TAT [5][6][7].For example, 225 Ac-DOTATATE is a promising treatment option that introduces a new dimension in patients who are unresponsive to 177 Lu-DOTATATE therapy or have attained the maximum prescribed cycles of 177 Lu-DOTATATE therapy [8].However, the supply of α-particleemitting radionuclides (such as 225Ac ) and the radiotoxic daughter products from decay (such as 213 Bi) is considered as a potential obstacle and challenge for the growth of the field [9]. 211At is a promising candidate isotope for TAT due to its chemical properties suitable for labeling targeting vectors, and the emission of just a single α-particle per decay, which offers enhanced control over off-target effects, although its 7.2 h half-life is relatively short [1].One branch occurs via electron capture and leads to 211 Po, which subsequently decays to stable 207 Pb by emitting an α-particle.This process generates a 77-92keV polonium x-ray, providing targeting strategies using this α-particle emitter with a theranostic characteristic for non-invasive nuclear planar or SPECT of real-time biodistribution [10,11].The other decay branch leads to 207 Bi through alpha-particle emission, with a half-life of 33.9 years, and decays to 207 Pb by electron capture.These decay pathways result in 100% alpha-particle emission during the decay of 211 At (5.87 and 7.45 MeV in 41.8% and 58.2% of the decays, respectively) [12] (Figure 1).
Pharmaceutics 2024, 16, x FOR PEER REVIEW 2 of 14 decay (such as 213 Bi) is considered as a potential obstacle and challenge for the growth of the field [9]. 211At is a promising candidate isotope for TAT due to its chemical properties suitable for labeling targeting vectors, and the emission of just a single α-particle per decay, which offers enhanced control over off-target effects, although its 7.2 h half-life is relatively short [1].One branch occurs via electron capture and leads to 211 Po, which subsequently decays to stable 207 Pb by emitting an α-particle.This process generates a 77-92keV polonium xray, providing targeting strategies using this α-particle emitter with a theranostic characteristic for non-invasive nuclear planar or SPECT of real-time biodistribution [10,11].The other decay branch leads to 207 Bi through alpha-particle emission, with a half-life of 33.9 years, and decays to 207 Pb by electron capture.These decay pathways result in 100% alphaparticle emission during the decay of 211 At (5.87 and 7.45 MeV in 41.8% and 58.2% of the decays, respectively) [12] (Figure 1).More significantly, in terms of the preparation and supply of 211 At, significant challenges also exist, which are distinct from those encountered with the other alpha nuclides ( 225 Ac and 227 Th).The primary method for 211 At production involves irradiating natural bismuth with α-particles via the 209 Bi(α,2n) 211 At nuclear reaction by cyclotron [13], and it can also be produced via the generator with 209 Bi( 7 Li,5n) 211 Rn reaction, where 211 Rn decays to 211 At, but this method is currently under development [14].Encouragingly, the requirement for improved accelerator infrastructure to produce 211 At recently has prompted concrete action from government agencies across various regions, including the US, EU, and Japan [15].For example, five sites have implemented the routine production and purification of 211 At, resulting in a total of six production sites of 211 At, enabling many preclinical and clinical uses of 211 At in Japan [16,17].Sadahiro Naka et al. [18] successfully established a stable method of [ 211 At]NaAt solution under GMP compliance that can be administered to humans intravenously as an investigational product.Europe and the US address the needs of 211 At through a funded multi-institutional program and enhanced cyclotron performance, respectively.
It is worth noting that 211 At has the capability to radiolabel small molecules and monoclonal antibodies (mAbs), encompassing thymidine analogs, biotin analogs, and bisphosphonate complexes, a potential advantage compared with radiometals, which require somewhat bulky polydentate ligands for stable incorporation.Until now, multiple 211 At-astatinated clinical trials have been conducted [19].The initial study was released by the Zalutsky Group at Duke University in 2008 [20]. 211At-ch81C6 was used to treat residual disease following the surgical resection of the glioma in the brain, with a total of 96.7% ± 3.6% of 211 At decayed in the surgically created resection cavity (SCRC), and the mean blood pool percentage injection dose was ≤0.3%ID/g.The outcomes were highly encouraging overall, showing a median overall survival time increase from 31 weeks to 54 weeks with additional 211 At-ch81C6, and no observed dose-limiting toxicity.In 2009, the second clinical trial (phase I) was reported, focusing on treating recurrent ovarian cancer after More significantly, in terms of the preparation and supply of 211 At, significant challenges also exist, which are distinct from those encountered with the other alpha nuclides ( 225 Ac and 227 Th).The primary method for 211 At production involves irradiating natural bismuth with α-particles via the 209 Bi(α,2n) 211 At nuclear reaction by cyclotron [13], and it can also be produced via the generator with 209 Bi( 7 Li,5n) 211 Rn reaction, where 211 Rn decays to 211 At, but this method is currently under development [14].Encouragingly, the requirement for improved accelerator infrastructure to produce 211 At recently has prompted concrete action from government agencies across various regions, including the US, EU, and Japan [15].For example, five sites have implemented the routine production and purification of 211 At, resulting in a total of six production sites of 211 At, enabling many preclinical and clinical uses of 211 At in Japan [16,17].Sadahiro Naka et al. [18] successfully established a stable method of [ 211 At]NaAt solution under GMP compliance that can be administered to humans intravenously as an investigational product.Europe and the US address the needs of 211 At through a funded multi-institutional program and enhanced cyclotron performance, respectively.
It is worth noting that 211 At has the capability to radiolabel small molecules and monoclonal antibodies (mAbs), encompassing thymidine analogs, biotin analogs, and bisphosphonate complexes, a potential advantage compared with radiometals, which require somewhat bulky polydentate ligands for stable incorporation.Until now, multiple 211 At-astatinated clinical trials have been conducted [19].The initial study was released by the Zalutsky Group at Duke University in 2008 [20]. 211At-ch81C6 was used to treat residual disease following the surgical resection of the glioma in the brain, with a total of 96.7% ± 3.6% of 211 At decayed in the surgically created resection cavity (SCRC), and the mean blood pool percentage injection dose was ≤0.3%ID/g.The outcomes were highly encouraging overall, showing a median overall survival time increase from 31 weeks to 54 weeks with additional 211 At-ch81C6, and no observed dose-limiting toxicity.In 2009, the second clinical trial (phase I) was reported, focusing on treating recurrent ovarian cancer after second-line chemotherapy with 211 At-MX35 F(ab') 2 [21].The decay-corrected activity concentration in the thyroid rose to 127 ± 63% of the initial activity concentration (IC) at 20h without blocking and remained below 20% IC with blocking.There were no detectable uptakes in other organs, and neither subjective nor laboratory adverse effects were observed.Until 2019, Andreas Hallqvist et al. [22] provided a long-term follow-up on intraperitoneal α-emitting radioimmunotherapy using 211 At in relapsed ovarian cancer.Among the four patients who survived for more than 6 years, one did not experience relapse, and no evident signs of radiation-induced toxicity or decreased tolerance to relapse therapy were observed.In addition, Yawen Li et al. [23] reported an astatine-211( 211 At)-labeled anti-CD45 monoclonal antibody, 211 At-BC8-B10, of interest for clinical trials involving allogeneic hematopoietic transplantation in the treatment of advanced hematological malignancies.This study led to the initiation of a phase I/II clinical trial using 211 At-BC8-B10 by the FDA.Shyril O Steen et al. conjugated 211 At to an anti-CD38 monoclonal antibody to develop an 211 At-CD38 therapy in a planned clinical trial [24].Hiroaki Echigo et al. developed probes for multiradionuclide radiotheranostics using RGD peptide Ga-DOTA-[ 211 At]c [RGDf(4-At)K] for clinical applications.[25,26] Unfortunately, the vast majority of the 211 At-labeled compounds of interest have been halted owing to the lack of in vivo stability of these compounds, although there are different reasons for instability than the other alpha-radiometals [27][28][29].The premature release of unbound 211 At in vivo has been observed, which can result in the irradiation of nontarget tissues, including physiological accumulation in the thyroid and stomach; the loss of dissociation and off-target of the radiometal is associated with therapeutic toxicity.To avoid toxic effects, highly stable 211 At-labeled compounds must be developed for further study.In this review, with 211 At, the different strategies for the radiolabeling procedures were described, aiming to play a catalytic role in the promotion of the research and development of [ 211 At]-astatinated radiopharmaceuticals.

General Strategies for 211 At Radiolabeling
In general, the satisfactory labeling method of 211 At requires adequate yields, modest conditions (temperature, solvent, oxidizing agent, and so on), short reaction time, and so on.The procedure must also maintain the specificity and affinity of the labeled carrier to its molecular target, and the bond between the 211 At and the molecule must remain stable in vivo.Iodine and 211 At are from the same group with similar chemical properties; in fact, 211 At also exhibits significant metallic characteristics.An important consideration is the carbon-halogen bond strength, which is lower for astatine at 49 kcal/mole compared to iodine at 62 kcal/mole [30].What is worse, the absence of the stable isotopes of astatine complicates the synthetic and analytical chemistry of 211 At-labeled compounds, which has significant restrictions on the research of 211 At radiopharmaceuticals [11].
Basically, the general synthetic approaches of radio-astatination corresponding to various carriers can be investigated through either nucleophilic or electrophilic reactions, involving the formation of aryl astatine-carbon bonds.The classification of strategies for radiolabeling 211 At radiopharmaceuticals: nucleophilic substitution occurs with halogen anions including halogen exchange, dediazoniation, and boron astatine, and electrophilic substitution occurs with electropositive halogens including direct aromatic substitution and demetallation reactions.The applications of these approaches will be discussed in the sections below (Figure 2).

Halogen Exchange
This reaction is typically conducted on iodinated derivatives, with examples provided for substitution on alkyl carbons and aromatic nucleophilic.Lui B et al. [31] have found that the halogen exchange labeling of 6β-iodomethyl-19-norcholest-5(10)-en-3β-ol (NCL-6-I) with 211 At using a crown ether as a medium enables significantly shorter reaction times compared to previously reported exchange methods using organic solvents.This process, initiated from the iodinated derivative, can be completed in 10 min at 70 °C, yielding about 80%.But, the radioactivity is observed in the thyroid tissue with NCL-6-211 At ranging from 3 to 5% of the administered dose at 6-12 h, indicating the in vivo deastatination of the administered steroid because of the weakness of the Calkyl-At bond.Phenylalanine, targeting L-type amino acids transporter 1 (LAT1), is highly expressed in various types of human cancer, may prove useful for a broad range of cancers, and has been previously labeled with 211 At using different methods.Meyer et al. [32] synthesized 2-[ 211 At]-L-phenylalanine and 4-[ 211 At]-L-phenylalanine from the corresponding iodo and bromo derivatives, marking the first application of Cu+-catalyzed nucleophilic halogen exchange reactions for astatination.The radiochemical yields of 2-[ 211 At]-L-phenylalanine and 4-[ 211 At]-L-phenylalanine by nucleophilic exchange ranged from 52-74% to 65-85% with HPLC purification.Notably, this reaction pathway necessitates high temperatures for completion, and the separation of the radiohalogenated product from a chemically similar substrate has often posed a challenge.Although the nucleophilic halogen exchange methods increase the rapidity of the reaction and provide adequate yields for experiments, their use is limited to substrates capable of withstanding relatively harsh conditions due to the high temperatures required.

Halogen Exchange
This reaction is typically conducted on iodinated derivatives, with examples provided for substitution on alkyl carbons and aromatic nucleophilic.Lui B et al. [31] have found that the halogen exchange labeling of 6β-iodomethyl-19-norcholest-5(10)-en-3β-ol (NCL-6-I) with 211 At using a crown ether as a medium enables significantly shorter reaction times compared to previously reported exchange methods using organic solvents.This process, initiated from the iodinated derivative, can be completed in 10 min at 70 • C, yielding about 80%.But, the radioactivity is observed in the thyroid tissue with NCL-6-211 At ranging from 3 to 5% of the administered dose at 6-12 h, indicating the in vivo deastatination of the administered steroid because of the weakness of the Calkyl-At bond.Phenylalanine, targeting L-type amino acids transporter 1 (LAT1), is highly expressed in various types of human cancer, may prove useful for a broad range of cancers, and has been previously labeled with 211 At using different methods.Meyer et al. [32] synthesized 2-[ 211 At]-L-phenylalanine and 4-[ 211 At]-L-phenylalanine from the corresponding iodo and bromo derivatives, marking the first application of Cu+-catalyzed nucleophilic halogen exchange reactions for astatination.The radiochemical yields of 2-[ 211 At]-L-phenylalanine and 4-[ 211 At]-L-phenylalanine by nucleophilic exchange ranged from 52-74% to 65-85% with HPLC purification.Notably, this reaction pathway necessitates high temperatures for completion, and the separation of the radiohalogenated product from a chemically similar substrate has often posed a challenge.Although the nucleophilic halogen exchange methods increase the rapidity of the reaction and provide adequate yields for experiments, their use is limited to substrates capable of withstanding relatively harsh conditions due to the high temperatures required.

Dediazoniation
Diazonium salts find extensive application in organic synthesis for the derivatization of aromatic rings, including halogenations.In 1977, Friedman A.M et al. [33] first reported a two-step process forming non-labile At-protein bonds.A stable astatine compound, p-astatobenzoic acid, was first prepared via a diazonium salt intermediate, and this compound was then added to bovine serum albumin (BSA) by a condensation reaction between the carboxylic acid group and an amine function on the protein.The results suggest that the astatinated protein is stabilized in vivo over a period of 20h.The studies of immunodiffusion and haemagglutination indicated that the 211 At-labelled BSA possessed the majority of the antigenic properties of unlabeled BSA.Visser G W M et al. [34] demonstrated that astatine reacts preferentially with the type of aromatic diazonium salt that decomposes via a radical reaction channel, and obtained compounds with 211 At (up to 90%) by heating at 50 • C until the end of nitrogen evolution.Wunderlich G et al. [35] developed a simple and rapid method for labeling proteins with 211 At using a 1,4-diaminobenzene link.1,4diaminobenzene is transformed into the diazonium salt, allowing for the simultaneous reactions of both 211 At and proteins with the diazonium salt.In the presence of a protein, 211 At reacted with the bisdiazonium at 20 • C for 1 h, resulting in yields of about 50-55%.Due to the high dilution of astatine involved, achieving a satisfactory radiochemical yield via the approach appears unlikely.In fact, while reactions involving radioiodine have been demonstrated to function, they typically result in low yields (max 15%).According to Meyer et al. [36], the latter seems more likely, between heterolytic cleavage resulting in the formation of an aryl cation and homolytic cleavage resulting in an aryl radical.Due to its higher polarizability, astatine exhibits a greater tendency to form a stable complex with the diazonium than iodine.Similarly, astatine also presents a greater inclination to cede an electron to form a radical capable of recombining with the aryl radical in the following sequence [37].Notably, the preparation of the diazonium necessitates harsh conditions (oxidative and acidic media), thus restricting the method to less-sensitive substrates.Meanwhile, a high proportion of side-products, often precipitated in the medium, complicates the purification and isolation of the product.To avoid the competing reaction of water with the diazonium resulting in the phenol derivative, an excess of halogen is necessary.

Boron-Astatinated
Recent reports have highlighted promising nucleophilic strategies utilizing the radiohalogen as a nucleophilic species (X − ) based on arylboronic acids/ester precursors that provided high radiochemical yields on a wide range of substrates [38].Related research indicated that the use of boron clusters such as decaborate, dodecaborate, and carborane has been considered recently to enhance the stability of antibodies labeled with 211 At [39,40], which are more stable than those linked by aromatic ones [41,42].
Sean W. Reilly et al. [43,44] have demonstrated the first method to astatinate compounds with boronic ester precursors, providing an efficient and non-toxic protocol that eliminates the conventional reliance on toxic organotin reagents.They prepared an [ 211 At] PARP inhibitor in high radiochemical yields by employing the corresponding boronic ester precursor and [ 211 At]NaAt in the presence of Cu(pyridine)4OTf in a 4:1 mixture of methanol and acetonitrile.Shirakami et al. [45] devised a novel approach for astatination by the substitution of 211 At for a dihydroxyboryl group coupled to phenylalanine.They obtained [ 211 At]4-astato-L-phenylalanine ([ 211 At]APA) as the carrier-free product in aqueous medium in high radiochemical yields (98.1 ± 1.9%, n = 5).The crude reaction mixture underwent purification via solid-phase extraction, resulting in a radiochemical purity of 99.3 ± 0.7% (n = 5).The high yield and purity were attributed to the formation of [ 211 At]AtI and AtI 2 -as the reactive intermediates in the astatination reaction.This reaction did not necessitate the use of organic solvents or toxic reagents, indicating its suitability for clinical applications.
This method could be successfully applied for the astatination not only of small molecules but also of biomolecules, such as antibodies.To overcome issues to eliminate the need for toxic organotin agents, Marion Berdal et al. [46] explored the potential of arylboron chemistry as an alternative method for the late-stage labeling of aBA-9E7.4,a CD138-targeting monoclonal antibody (mAb).The reactivity of a model precursor, 4-chlorobenzeneboronic acid with nucleophilic 211 At, was at first investigated in aqueous conditions.In the presence of a copper (II) catalyst and 1,10-phenanthroline, radiochemical yields >95% were attained within 30 min at room temperature.DS Wilbur et al. [47] intended to determine whether the nido-carborane-containing biotin derivatives provide a significant improvement in astatine stability over the biotin derivatives previously studied, although the biodistribution studies indicated that deastatination was still occurring.Katsumasa Fujiki et al. [48] report a facile synthesis of an 211 At-labeled trastuzumab (anti-HER2 antibody) by designing and synthesizing a tetrazine probe having closo-decaborate(2−) as the prosthetic group for binding 211 At, which forms a bioavailable stable complex.The one-pot three-component double-click labeling method could be utilized without reducing the antibody binding affinity, but the 211 At decaborate complex proved unsuitable as an intravenously administered antibody-based therapeutic due to the significant hydrophobic properties of the labeling agent which may have altered the native biodistribution of the antibody.
While the boron cage derivatives provided stable 211 At-labeled compounds against in vivo deastatination, several experiments indicated that the borane derivatives may influence the absorption, distribution, and elimination of the carriers, making corresponding radiopharmaceuticals show longtime retention in the blood, kidney, or liver [49].Meanwhile, it is also not applicable to radioiodination due to its reliance on electrophilic halogen species, which may once again react with tyrosines and histidine residues.These results call for a new scaffold that provides 211 At-labeled compounds of high stability against in vivo deastatination.Hiroyuki Suzuki et al. [50] confirmed that 211 At-labeled neopentyl glycol also remained stable against both nucleophilic substitution and CYP-mediated metabolism.The biodistribution profiles of 211 At-labeled neopentyl glycol resembled those of its radioiodinated counterpart in contrast to the 125 I/ 211 At-labeled benzoate pair.Urine analyses confirmed the excretion of 211 At-labeled neopentyl glycol in the urine as a glucuronide conjugate with no free At − .These findings suggest that neopentyl glycol would constitute a promising scaffold to prepare a radiotheranostic system with 211 At.

Direct Aromatic Electrophilic Substitution
Direct astatination using electrophilic 211 At (utilizing chloramine-T or H 2 O 2 as oxidizing agent), although it had no denaturation of the protein, was demonstrated to be unstable in vivo due to the release of free 211 At [51].Initially, the instability was ascribed to the vulnerability of the At-C [52] or At-S bond (this kind of bonding is easily hydrolyzed in vivo) [53], assuming that astatine reacted with the tyrosine, histidine, or cysteine residues of the proteins when employing the direct radiolabeling method.Norseyev Y et al. [54] completed the carrier-free astatotyrosine using an electrophilic reaction in acidic media, and the yield was about 90%.The optimal conditions of a temperature range of 150-160 • C and reaction time of 20-30 min were chosen for synthesizing astatotyrosine that was denaturing for proteins, which means it was performed with radioiodine and was unlikely with astatine.Consequently, astatine could not be used in the direct radiolabeling procedures of proteins, necessitating the development of prosthetic groups for indirect radiolabeling analogous to those developed for radioiodination [37].But there is always an exception, so a method to produce 211 At-methylene blue has been devised [55].The conditions for transferring astatine to a chemically active electrophilic form were found.The method provides the radiochemical yield of 211 At-methylene blue as large as 68 ± 6% in 15 min at 100 • C, with sodium persulfate as the oxidizing agent.However, due to the substantial starting material required, the specific activity remains very low, and purification is necessary.
In 2016, Brechbiel et al. [56] initially assumed that the nucleophilic substitution of astatide on aryliodonium salts would proceed similarly to iodide.However, this study revealed how regioselectivity was driven by electronic effects, as 211 At-product formation proceeded with high selectivity for the aryl ring containing the most electron-withdrawing substituent in the para-position.These findings highlight the utility of diaryliodonium salts much more than expected in synthesizing astatinated compounds, particularly with the radioisotope 211 At.Despite achieving high yields with this approach, the astantination of the conjugate aryl group leads to the formation of unwanted side-products.

Demetallation Reactions
Electrophilic demetallation, the most versatile astatination strategy, is the utilization of an astatodemetallation reaction with a tin or silicon precursor, from small molecules to biomolecules.Organomercuric compounds were the initial precursors in search which enabled the introduction of 211 At with high yields into various compounds.The radioastatination of a diverse range of organic compounds with organomercury precursors has been documented by Visser and co-workers [57,58].Nonetheless, the inclusion of the highly toxic traces of mercury in the resultant compound has hindered their application for pharmaceutical use.Metals from group IV of the periodic table, particularly tin, silicon, and boron, have been preferred.For example, in initial studies, Milius R A et al. [59] employing trialkylstannyl precursors necessitating the use of iodide carriers to achieve reasonable 211 At labeling yields.More recently, astatination via electrophilic destannylation without the use of an iodide carrier has been reported [60,61].Like [ 131 I]MIBG, Vaidyanathan G et al. [62] have developed two steps for the preparation of [ 211 At]MABG from 3-(tri-n-butylstanny1) benzylamine.In the limited experiments conducted, the overall yield was 13% because of the considerable water content in the activity, and this method involved an extra step after the introduction of 211 At, whereas the research team developed a one-step approach for the preparation of [ 211 At]MABG from 1-[3-(trimethylsilyl)-benzyllguanidine, and the yields were 87.7 ± 4.3% at 70 • C in the presence of trifluoroacetic acid as the medium and N-chlorosuccinimide as the oxidant.Considering that organotin compounds must be separated efficiently from the desired astatinated compound, like the method using a precursor grafted on a polymer support that simplifies the process of purification and significantly reduces the quantity of liberated tin, Vaidyanathan G et al. [63] developed a convenient approach to synthesize [ 211 At]MABG at a high level that is capable of kit formulation.A tin precursor anchored to a solid support was treated with a methanolic solution of 211 At with a mixture of acetic acid as the oxidant, which led to radiochemical yields of 63 ± 9% within a shorter synthesis duration.The radiochemical purity exceeded 90% with no detected chemical impurity.Ana P. Kiess et al. [64] developed a urea-based, 211 At-labeled small molecule( 211 At-6)-targeting prostate-specific membrane antigen (PSMA) for the treatment of micrometastases induced by prostate cancer via N-succinimidyl-4-tributylstannyl benzoate, in the presence of acetic acid and N-chlorosuccinimide, at the room temperature 30min, astatodestannylation, and the in situ deprotection of precursor delivered 211 At-6 in 62.6 ± 9.5%.Due to theoretical advantages, many preclinical studies amply demonstrated that [ 211 At]PSMA or close analogs hold promise for translation in the treatment protocol of mCRPCa patients, which for sure is a giant leap towards cost-effective precision oncology [65].

prostate cancer Preclinical
The demetallation reactions of electrophilic substitution (destannylation) oncoprotein mGluR1 for melanoma Preclinical Table 1.Cont.The demetallation reactions of electrophilic substitution (destannylation) prostate cancer Preclinical 211 At-labelled FAPI-04 [69] The demetallation reactions of electrophilic substitution (destannylation) glioma tumor Preclinical The recent clinical advancements in targeting therapies via attaching them to antibodies that target tumor-restricted biomarkers mark a new era in cancer treatments.However, despite their promise, these therapies may face limitations in completely eradicating tumors due to their lots of shortcomings.One highly promising strategy to overcome this challenge is to target potent radioactive isotopes specifically to tumors by molecular delivery systems like antibodies and derivatives [70]. 211At offers many attractive features for targeted radiotherapy, such as compatibility with various carriers capable of delivering a dose to patients.
In recent years, the primary approach for radiolabelling proteins with 211 At involves a two-step procedure based on the radiosynthesis of an intermediate prosthetic group N-[ 211 At]succinimidylastatobenzoate ([ 211 At]SAB), by the electrophilic astatodestannylation of the corresponding aryltrialkylstannane precursor, similar to the analogous procedure that had been developed previously for radioiodination [71].Emma Aneheim et al. [72] indicated that immunoconjugates formed by conjugating an antibody (e.g., Traztuzumab) with alkyltin-based prosthetic groups (N-succinimidyl 3-(trimethylstannyl)benzoate) can be stored in a neutral buffer (pH 7.4) for over 3 months at 4 °C and they can be stored at -20 °C without compromising the quality of the labeled product.Lindegren et al. [73,74] developed a single-step strategy from the precursor grafted to the antibody prior, thereby saving time and enhancing yields compared to two-step approaches.Nevertheless, it still relies on the established electrophilic destannylation reaction.Labeling complex molecules like proteins with heavy radiohalogens is frequently poorly effective due to the requirement for multiple steps and intermediate purifications.
As mentioned above, the ability of mAbs to target tumor-associated antigens has high affinity and specificity.However, the prolonged circulation duration of full-length immunoglobulins, i.e., they can take several days to achieve optimal biodistribution in the body, The demetallation reactions of electrophilic substitution (destannylation) prostate cancer Preclinical 211 At-labelled FAPI-04 [69] yl)-1,3-thiazol-2-yl]-Nmethylbenzamide ( 211 At-AITM) [67] substitution (destannylation) for melanoma Preclinical The demetallation reactions of electrophilic substitution (destannylation) prostate cancer Preclinical 211 At-labelled FAPI-04 [69] The demetallation reactions of electrophilic substitution (destannylation) glioma tumor Preclinical The recent clinical advancements in targeting therapies via attaching them to antibodies that target tumor-restricted biomarkers mark a new era in cancer treatments.However, despite their promise, these therapies may face limitations in completely eradicating tumors due to their lots of shortcomings.One highly promising strategy to overcome this challenge is to target potent radioactive isotopes specifically to tumors by molecular delivery systems like antibodies and derivatives [70]. 211At offers many attractive features for targeted radiotherapy, such as compatibility with various carriers capable of delivering a dose to patients.
In recent years, the primary approach for radiolabelling proteins with 211 At involves a two-step procedure based on the radiosynthesis of an intermediate prosthetic group N-[ 211 At]succinimidylastatobenzoate ([ 211 At]SAB), by the electrophilic astatodestannylation of the corresponding aryltrialkylstannane precursor, similar to the analogous procedure that had been developed previously for radioiodination [71].Emma Aneheim et al. [72] indicated that immunoconjugates formed by conjugating an antibody (e.g., Traztuzumab) with alkyltin-based prosthetic groups (N-succinimidyl 3-(trimethylstannyl)benzoate) can be stored in a neutral buffer (pH 7.4) for over 3 months at 4 °C and they can be stored at -20 °C without compromising the quality of the labeled product.Lindegren et al. [73,74] developed a single-step strategy from the precursor grafted to the antibody prior, thereby saving time and enhancing yields compared to two-step approaches.Nevertheless, it still relies on the established electrophilic destannylation reaction.Labeling complex molecules like proteins with heavy radiohalogens is frequently poorly effective due to the requirement for multiple steps and intermediate purifications.
As mentioned above, the ability of mAbs to target tumor-associated antigens has high affinity and specificity.However, the prolonged circulation duration of full-length immunoglobulins, i.e., they can take several days to achieve optimal biodistribution in the body, The demetallation reactions of electrophilic substitution (destannylation) glioma tumor Preclinical The recent clinical advancements in targeting therapies via attaching them to antibodies that target tumor-restricted biomarkers mark a new era in cancer treatments.However, despite their promise, these therapies may face limitations in completely eradicating tumors due to their lots of shortcomings.One highly promising strategy to overcome this challenge is to target potent radioactive isotopes specifically to tumors by molecular delivery systems like antibodies and derivatives [70]. 211At offers many attractive features for targeted radiotherapy, such as compatibility with various carriers capable of delivering a dose to patients.
In recent years, the primary approach for radiolabelling proteins with 211 At involves a two-step procedure based on the radiosynthesis of an intermediate prosthetic group N-[ 211 At]succinimidylastatobenzoate ([ 211 At]SAB), by the electrophilic astatodestannylation of the corresponding aryltrialkylstannane precursor, similar to the analogous procedure that had been developed previously for radioiodination [71].Emma Aneheim et al. [72] indicated that immunoconjugates formed by conjugating an antibody (e.g., Traztuzumab) with alkyltin-based prosthetic groups (N-succinimidyl 3-(trimethylstannyl)benzoate) can be stored in a neutral buffer (pH 7.4) for over 3 months at 4 • C and they can be stored at −20 • C without compromising the quality of the labeled product.Lindegren et al. [73,74] developed a single-step strategy from the precursor grafted to the antibody prior, thereby saving time and enhancing yields compared to two-step approaches.Nevertheless, it still relies on the established electrophilic destannylation reaction.Labeling complex molecules like proteins with heavy radiohalogens is frequently poorly effective due to the requirement for multiple steps and intermediate purifications.
As mentioned above, the ability of mAbs to target tumor-associated antigens has high affinity and specificity.However, the prolonged circulation duration of full-length immunoglobulins, i.e., they can take several days to achieve optimal biodistribution in the body, necessitates their labeling with radionuclides with multiday physical half-lives, for example, 225 Ac (t 1/2 10d) are commonly used for radioimmunotherapy [75].The unavoidable combination of long biological and physical half-lives can create high radiation dose rates to healthy tissues, a complication that has dampened enthusiasm for radioimmunoconjugates in the clinic.On the one hand, single-domain antibody fragments (sdAbs), alternatively termed VHH molecules and nanobodies, present a promising platform for selectively delivering radionuclides to cancer cells for nuclear imaging and targeted radionuclide therapy.The use of sdAbs for TRT with the 211 At is particularly attractive due to the high alignment of the physical half-life (7.2 h) with the pharmacokinetic profile of sdAbs.Yutian Feng et al. [76] have evaluated iso-[ 211 At]-AGMB-PODS via the electrophilic astatodestannylation of the corresponding precursor, which was significantly more stable in vitro compared to its maleimide analog in the presence of cysteine and human serum albumin (HSA), demonstrating excellent tumor uptake and high in vivo stability.On the other hand, in vivo pretargeting is predicated on separate injections of the immunoglobulin and radionuclide and relies upon a biorthogonal ligation to join two components together within the body.Labeling the antibody with a fast-moving, small molecule radioligand after it has achieved an optimal biodistribution in vivo, thereby limiting the circulation duration of the assembled radioimmunoconjugate in the blood.More significantly, it is the fact that this method enables the utilization of radionuclides with shorter half-lives that are normally incompatible with full-length IgG, such as 211 At (t 1/2 7.2h).Chiara Timperanza et al. [77] have synthesized and evaluated poly-L-lysine-based effector molecules for pretargeting applications, leveraging the tetrazine and trans-cyclooctene reaction with 211 At for targeted alpha therapy, and high specific astatine activity was achieved without affecting the stability of the radiopharmaceutical or the binding between tetrazine and transcyclooctene.

Conclusions and Future Perspectives
In conclusion, 211 At-labeled radiopharmaceuticals have shown great promise for the targeted alpha therapy of cancer, owing to the favorable nuclear properties of 211 At and the high cytotoxicity of alpha-particles.However, the widespread clinical application of 211 At is currently hindered by the limited in vivo stability of 211 At-labeled compounds, which can lead to off-target toxicity and reduced therapeutic efficacy.To address this challenge, significant efforts have been devoted to the development of novel bifunctional coupling agents and labeling strategies that can enhance the stability of 211 At-labeled radiopharmaceuticals.While progress has been made in this regard, there is still much room for improvement and innovation.
Looking forward, several key areas of research are expected to drive the future development of 211 At-based targeted alpha therapy.Firstly, the design and synthesis of new bifunctional coupling agents with improved resistance to deastatination will be crucial for enhancing the in vivo stability and targeting specificity of 211 At-labeled radiopharmaceuticals.This may involve the use of novel chemical scaffolds, such as nanoparticles, liposomes, or engineered protein constructs, that can protect the 211 At-labeled moiety from degradation while enabling efficient delivery to the tumor site.Additionally, the exploration of alternative labeling approaches, such as click chemistry, enzyme-mediated reactions, and supramolecular assembly, may lead to the development of more efficient and specific 211 At-labeling methods.
Secondly, the identification of new molecular targets and carrier molecules for 211 Atbased targeted alpha therapy will be essential for expanding the therapeutic scope and clinical applicability of this approach.While antibodies and peptides have been the mainstay of 211 At radiopharmaceuticals to date, there is growing interest in the use of smaller targeting moieties such as aptamers, affibodies, nanobodies, and engineered protein scaffolds, which offer the advantages of improved tissue penetration, faster clearance, and lower immunogenicity.Moreover, the use of multivalent and multifunctional carriers, such as nanoparticles and exosomes, may enable the delivery of higher payloads of 211 At to the tumor site while minimizing off-target toxicity.The combination of 211 At with other therapeutic modalities, such as chemotherapy, immunotherapy, and targeted drug delivery, may also lead to synergistic effects and improved treatment outcomes.
Thirdly, the optimization and standardization of 211 At production and quality control methods will be critical for ensuring the reliable and consistent supply of high-quality 211 At for clinical use.This will require the development of more efficient and automated methods for 211 At isolation, purification, and radiolabeling, as well as the establishment of robust quality control assays for assessing the purity, specific activity, and stability of 211 At-labeled compounds.The use of advanced analytical techniques, such as mass spectrometry and nuclear magnetic resonance spectroscopy, may provide valuable insights into the chemical and structural properties of 211 At-labeled radiopharmaceuticals, enabling the rational design of more stable and effective compounds.
Finally, the continued preclinical and clinical evaluation of 211 At-labeled radiopharmaceuticals will be essential for realizing the full potential of this approach.This will involve the development of standardized protocols for 211 At production, quality control, and administration, as well as the establishment of appropriate animal models and clinical trial designs.The use of advanced imaging techniques, such as positron emission tomography (PET) and single-photon emission computed tomography (SPECT), may enable the non-invasive monitoring of 211 At biodistribution and tumor targeting, facilitating the optimization of dosing regimens and treatment planning.Moreover, the long-term follow-up of patients treated with 211 At-labeled radiopharmaceuticals will be crucial for assessing the potential risks and benefits of this approach, including the incidence of secondary malignancies and other late toxicities.
In summary, while significant progress has been made in the development of 211 Atlabeled radiopharmaceuticals for targeted alpha therapy of cancer, there are still many challenges and opportunities for future research.The continued innovation in 211 At labeling chemistry, carrier molecule design, and production methods, coupled with the rigorous preclinical and clinical evaluation of new 211 At-labeled compounds, will be the key to unlocking the full therapeutic potential of this promising approach.With the growing interest and investment in targeted alpha therapy, it is expected that 211 At-based radiopharmaceuticals will play an increasingly important role in future cancer treatment, offering new hope for patients with advanced or metastatic disease.

Table 1 .
Examples of 211 At radiolabeling reaction strategies of small molecules.

Table 1 .
Examples of 211 At radiolabeling reaction strategies of small molecules.

Table 1 .
Examples of 211 At radiolabeling reaction strategies of small molecules.

Table 1 .
Examples of 211 At radiolabeling reaction strategies of small molecules.

Table 1 .
Examples of 211 At radiolabeling reaction strategies of small molecules.