Isolation and Characterization of a Lytic Bacteriophage RH-42-1 of Erwinia amylovora from Orchard Soil in China

Fire blight, caused by the bacterium Erwinia amylovora, is a major threat to pear production worldwide. Bacteriophages, viruses that infect bacteria, are a promising alternative to antibiotics for controlling fire blight. In this study, we isolated a novel bacteriophage, RH-42-1, from Xinjiang, China. We characterized its biological properties, including host range, plaque morphology, infection dynamics, stability, and sensitivity to various chemicals. RH-42-1 infected several E. amylovora strains but not all. It produced clear, uniform plaques and exhibited optimal infectivity at a multiplicity of infection (MOI) of 1, reaching a high titer of 9.6 × 109 plaque-forming units (PFU)/mL. The bacteriophage had a short latent period (10 min), a burst size of 207 PFU/cell, and followed a sigmoidal one-step growth curve. It was stable at temperatures up to 60 °C but declined rapidly at higher temperatures. RH-42-1 remained viable within a pH range of 5 to 9 and was sensitive to extreme pH values. The bacteriophage demonstrates sustained activity upon exposure to ultraviolet radiation for 60 min, albeit with a marginal reduction. In our assays, it exhibited a certain level of resistance to 5% chloroform (CHCl3), 5% isopropanol (C3H8O), and 3% hydrogen peroxide (H2O2), which had little effect on its activity, whereas it showed sensitivity to 75% ethanol (C2H5OH). Electron microscopy revealed that RH-42-1 has a tadpole-shaped morphology. Its genome size is 14,942 bp with a GC content of 48.19%. Based on these characteristics, RH-42-1 was identified as a member of the Tectiviridae family, Alphatectivirus genus. This is the first report of a bacteriophage in this genus with activity against E. amylovora.


Introduction
Fire blight is a quarantine bacterial disease caused by Erwinia amylovora in China.It infects fruit trees such as pear, apple, hawthorn, and other species in the Rosaceae family [1].The pathogen invades the host plant's above-ground tissues, including flowers, young branches, trunk, main stem, fruits, and rootstock, through wounds or natural openings.
In severe outbreaks, it can rapidly spread from affected young organs to main branches and stems down to the roots within a few weeks.This can lead to the death of the entire plant, resulting in orchard destruction and substantial economic losses [2].Fire blight first occurred in Yili and Bazhou, Xinjiang, China in 2016 and 2017, it rapidly escalating and posing a significant threat and risk to the national pear industry [3].
Viruses 2024, 16, 509 2 of 17 The global fight against fire blight faces a major hurdle due to the scarcity of resistant pear varieties.This necessitates the development of safe and effective prevention and control strategies [4].Chemical control remains the primary measure for the management of the disease.However, the number of specialized registered chemical agents with significant efficacy against fire blight is limited.Sole reliance on these treatments not only offers limited effectiveness but also contributes to increased antibiotic resistance in the pathogen, pesticide residues, and environmental pollution [5].
In recent years, the biological control of fire blight has made some progress.Biological control agents, such as the fluorescent pseudomonad "Blight Ban A506" [6], the broad-spectrum Pantoea sp.formulation "Blight BanC9-1" [7], the Bacillus subtilis QST713 formulation "Serenade" [8], and BD170 [9] have been applied on a certain scale, showing comparable efficacy to antibiotics under ideal conditions.In China, a group of antagonistic strains exhibiting good activity against fire blight bacteria has been screened, but they are still in the research or trial phase and have not been registered for use [10].
Lytic bacteriophages are a class of viruses that lyse and kill target bacteria.These viruses possess distinct advantages, including strong specificity, rapid proliferation, high efficacy, and resistance prevention [11].Therefore, their unique bactericidal properties can effectively combat antibiotic-resistant bacterial infections.The utilization of bacteriophages has shown promising results in controlling diseases such as tomato bacterial wilt (Ralstonia solanacearum), bacterial speck of tomato (Pseudomonas syringae pv.tomato), citrus canker (Xanthomonas citri subsp.citri), and potato soft rot (Pectobacterium carotovora subsp.carotovora), indicating their potential as alternatives to antibiotic-based antimicrobial agents [12,13].
Research on using bacteriophages to control fire blight disease in pears has made notable progress outside of China.Akremi et al. [14] identified four E. amylovora bacteriophages, PEar1, PEar2, PEar4, and PEar6, whose individual or combined use significantly reduced the survival of E. amylovora, lowering the incidence of fire blight disease.In 2019, the United States Environmental Protection Agency approved AgriPhageTm-Fire Blight, a bacteriophage-based pesticide for fire blight disease control.However, in China, research in this field is limited, with few reports available [3,15].
In response to fire blight outbreaks in Xinjiang pear orchards, this study aimed to identify potential biocontrol agents.We obtained diverse E. amylovora strains from infected orchards and successfully isolated bacteriophages with potent lytic activity against the pathogen from the surrounding soil.We then characterized the biological and environmental stability, as well as the genomic features, of a particularly promising bacteriophage strain, revealing its potential for sustainable fire blight control in the region.

Bacterial Strains and Culture Media
Fourteen E. amylovora strains were isolated from orchards in Xinjiang exhibiting typical symptoms of fire blight from 2016 to 2023.These strains were isolated using tissue isolation methods, subjected to pathogenicity testing, identification, and preservation (Table 1).The P. syringae pv.syringae strain D1, B. velezensis strains FN12, F34, F44, and the B. amyloliquefaciens strain FX74 were also isolated and stored in our laboratory.The Escherichia coli strain B13 was provided by the Agricultural Microbiology Laboratory at Xinjiang Agricultural University.
Nutrient Agar (NA) (g/L) (beef extract 3, sucrose 5, NaCl 5, peptone 10, agar 15) was used for bacterial culture.Soft agar (6 g/L) was used for a double-layer overlay plate.Soil samples (134 in total) were collected from orchards in areas severely affected by fire blight in Korla City and Yuli County, Bazhou, Xinjiang.The samples were taken from the soil surface (5-15 cm) around diseased plants after removing surface debris.

Enrichment and Isolation
Five E. amylovora strains (Ea 001, FK-1, KRL-1, TC-1, and TC-2) were inoculated into NB broth.The cultures were shaken at 28 • C and 180 rpm for 24 h until the OD 600 reached 0.8-1.0.The cultures were then diluted with sterile water to a concentration of 10 8 CFU/mL, and equal volumes were mixed to prepare a composite bacterial solution.
Twenty grams of soil sample was added to 50 mL of the E. amylovora composite bacterial solution.After thorough mixing, the mixture was incubated overnight at 28 • C with shaking at 180 rpm.The culture was centrifuged at 10,000 rpm for 10 min, and the supernatant was filtered twice through a 0.22 µm microporous membrane (Navigator Lab Instrument, Tianjin, China) to obtain the filtrate for enrichment.
The double-layer agar plate method was employed for bacteriophage isolation [16].One hundred microliters of the E. amylovora composite bacterial solution and 100 µL of the enrichment culture filtrate were mixed and incubated for 15 min.The mixture was evenly mixed with 7.5 mL of 45 • C NA soft agar and quickly poured onto a prepared NA plate.The solidified double-layer plates were inverted and incubated at 28 • C for 12 h until the plaque appeared.

Purification, Concentration, and Titer Determination
The bacteriophage plaques were picked up within 24 h and suspended in 1 mL of SM buffer (100 mM of NaCl, 8 mM of MgSO 4 , and 100 mM of Tris-HCl).After vortexing and crushing the plaques, the suspension was filtered twice through a 0.22 µm microporous membrane.Subsequently, the bacteriophage solution was serially diluted tenfold with SM buffer.A 100 µL aliquot of the diluted bacteriophage solution was mixed with 100 µL of the host bacterial suspension (OD 600 = 0.5), incubated for 15 min, and then poured onto an NA plate.The plates were inverted and incubated at 28 • C until uniform plaque morphology was observed.This process was repeated 3-5 times until consistent plaque size and morphology were achieved.
The bacteriophage particles were precipitated by PEG8000 (100 g/L) from broth culture.The suspension was centrifuged at 10,000 rpm for 10 min at 4 • C. The pellet was resuspended in 2 mL of SM buffer and then filtered through a 0.22 µm filter to obtain the concentrated bacteriophage liquid.
The bacteriophage titer was determined by the double-layer overlay method.The titer (PFU/mL) was calculated using the formula: bacteriophage titer (PFU/mL) = (number of plaques/0.1 mL) × dilution factor.

Electron Microscopy
The bacteriophage was purified before undergoing negative staining with phosphotungstic acid.Subsequent observations and photographic documentation were carried out using a transmission electron microscope (TEM; model HT7800, Hitachi, Tokyo, Japan).The sizes of the bacteriophages were analyzed using Image-pro plus 6.0 software (Media Cybernetics, Inc., Rockville, MD, USA).

Characterization of Bacteriophage 2.5.1. Determination of Optimal Multiplicity of Infection (MOI)
The host bacteria were cultured to the logarithmic phase (OD 600 = 0.4~0.5).Different dilutions of bacteriophages with various MOI values (100, 10, 1, 0.1, 0.01, and 0.001) were mixed with an equal volume of host bacterial suspension.The mixture was incubated at room temperature for 15 min and then cultured on a shaker at 28 • C and 180 rpm for 9 h.The number of bacteriophage plaques was determined using the double-layer agar plate method.This process was repeated three times, and the bacteriophage titer under different MOI conditions was calculated.

One-Step Growth Curve Determination
The method for the one-step growth curve experiment follows the approach described by Wen and Liang et al. [17,18].Host bacterial cultures grown to the logarithmic phase (OD 600 = 0.2~0.3,concentration of 2.05 × 10 7 CFU/mL) were processed by taking a 5 mL sample and centrifuging at 10,000 rpm for 2 min.The supernatant was discarded, and the pellet was resuspended in 5 mL of NB medium; this process was repeated twice.Phage dilutions were added at an optimal multiplicity of infection (MOI) ratio of 1:1, thoroughly mixed, and incubated at room temperature for 10 min to allow for adsorption.The mixtures were then centrifuged to remove free phages in the supernatant.The pellet was resuspended in 10 mL of NB medium and incubated on a shaker at 28 • C with shaking at 180 rpm.Samples of 600 µL were taken every 10 min for a duration of 120 min from the start of the incubation.The collected samples were centrifuged at 10,000 rpm for 2 min and filtered through a 0.22 µm filter to obtain phage lysate, which was then diluted and mixed with host bacterial cultures to prepare double-layer agar plates for the determination of phage titers.The burst size was calculated using the formula: burst size = titer at the end of the burst period/initial concentration of host bacteria at the time of infection.

Host Range
The spot method was used to determine the bacteriophage host range [19].Fourteen strains of E. amylovora, one strain of E. coli, one strain of P. syringae pv.syringae, one strain of B. amyloliquefaciens and three strains of B. velezensis were used.The bacterial suspensions (OD 600 of 0.8~1.0)were diluted to a concentration of 10 8 CFU/mL with sterile water.A 100 µL aliquot of each bacterial suspension was mixed with 7.5 mL of NA soft agar medium and poured onto an NA plate to create double-layer agar plates.After solidification, 10 µL of bacteriophage solutions at different dilutions (10 0 -10 −7 ) were spotted onto them.The plates were incubated at 28 • C overnight, and the formation of bacteriophage plaques was observed.pH: Set NB medium at pH values of 3, 4, 5, 6, 7, 8, 9, 10, and 11.After incubating bacteriophage at 28 • C with shaking at 180 rpm for 2 h, the treated bacteriophage titer was determined as above.
UV tolerance: Bacteriophage (10 9 PFU/mL) was placed in a 90 mm sterile Petri dish and exposed to UV light (30 W) at a distance of 30 cm for 30, 60, 90, 120, 150, and 180 min.The treated bacteriophage was determined as above.
All of the above assays were repeated three times.
The full genome sequence, as well as the amino acid sequences of the bacteriophage terminase large subunit and capsid protein, were aligned with the GenBank database.Sequences with high homology were selected to construct a phylogenetic tree using MEGA11.0software [26] based on the neighbor-joining method.

Statistical Analysis
The results were expressed in the form of mean ± standard deviation (SD) in appropriate places.Origin 2022 software was used to analyze the data.

Isolation, Purification, and Electron Microscopy
Among the 134 soil samples, 22 samples showed bacteriophage enrichment.After 10-12 h of incubation, plaques of various sizes developed on the bacterial lawns of E. amylovora.Two samples exhibited large and clear plaques, 12 samples had pinpoint-sized plaques, and 8 samples showed halo-like plaques around the colonies.Following repeated purification, two bacteriophages were obtained from the two samples with big and clear plaques.The plaques produced by these bacteriophages were circular, transparent, with smooth edges, had no halos, and were similar in size.One of them, with a plaque diameter of 3.29 ± 0.02 mm (n = 30), as shown in Figure 1a, had a titer of 9.6 × 10 9 PFU/mL.It was assigned the name RH-42-1 (indicating that the strain was isolated from the 42nd soil sample of Renhe Farm, Xinjiang, China).
TEM revealed that bacteriophage RH-42-1 has a tadpole-like morphology with a clear icosahedral head, a diameter of 69.44 ± 1.96 nm (n = 15), and a non-contractile tail in length 21.13 ± 3.30 nm (n = 15), as shown in Figure 1b.TEM revealed that bacteriophage RH-42-1 has a tadpole-like morphology with a clear icosahedral head, a diameter of 69.44 ± 1.96 nm (n = 15), and a non-contractile tail in length 21.13 ± 3.30 nm (n = 15), as shown in Figure 1b.

Optimal Multiplicity of Infection (MOI) for Bacteriophage RH-42-1
By co-culture different ratios of bacteriophages with the host bacteria and determining their infectivity, the results are presented in Table 2.When the MOI value was 1.0, the potency of bacteriophages was the highest, reaching 9.6 × 10 9 PFU/mL.Therefore, the optimal MOI for this bacteriophage was determined to be 1:1.

One-Step Growth Curve of Bacteriophage RH-42-1
The results of the one-step growth curve for bacteriophage RH-42-1 are shown in Figure 2. Within the first 10 min of incubation, the number of phages remained constant in a latent stage.From 20 to 100 min post-infection, the quantity of RH-42-1 sharply increased, entering the burst phase in 80 min and a burst size of 2.07 × 10 2 PFU/cell.After 100 min of incubation, the bacteriophage quantity stabilized, with a potency plateauing around 10 9 PFU/mL.

Optimal Multiplicity of Infection (MOI) for Bacteriophage RH-42-1
By co-culture different ratios of bacteriophages with the host bacteria and determining their infectivity, the results are presented in Table 2.When the MOI value was 1.0, the potency of bacteriophages was the highest, reaching 9.6 × 10 9 PFU/mL.Therefore, the optimal MOI for this bacteriophage was determined to be 1:1.

One-Step Growth Curve of Bacteriophage RH-42-1
The results of the one-step growth curve for bacteriophage RH-42-1 are shown in Figure 2. Within the first 10 min of incubation, the number of phages remained constant in a latent stage.From 20 to 100 min post-infection, the quantity of RH-42-1 sharply increased, entering the burst phase in 80 min and a burst size of 2.07 × 10 2 PFU/cell.After 100 min of incubation, the bacteriophage quantity stabilized, with a potency plateauing around 10 9 PFU/mL.

Host Range of Bacteriophage RH-42-1
The host range of bacteriophage RH-42-1 was determined by testing its ability to lys different strains, as shown in Table 3. RH-42-1 could lyse five different strains from differ ent sources and hosts, including FK-1, KEL-1, KEL-2, TC-1, and TC-2.It did not exhibi lytic activity against E. coli, P. syringae pv.syringae, one strain of B. amyloliquefaciens and three strains of B. velezensis which are antagonistic to E. amylovora."+" indicates that it can be cleaved by phages, and "−" indicates that it cannot be lysed.

Host Range of Bacteriophage RH-42-1
The host range of bacteriophage RH-42-1 was determined by testing its ability to lyse different strains, as shown in Table 3. RH-42-1 could lyse five different strains from different sources and hosts, including FK-1, KEL-1, KEL-2, TC-1, and TC-2.It did not exhibit lytic activity against E. coli, P. syringae pv.syringae, one strain of B. amyloliquefaciens and three strains of B. velezensis which are antagonistic to E. amylovora.The ability of bacteriophage RH-42-1 to lyse under different temperature conditions is shown in Figure 3.At temperatures ≤45 °C, RH-42-1 maintained high activity, and its potency remained relatively stable within the first 60 min of treatment.When the temperature was ≥55 °C, the activity of the bacteriophage started to decrease, and potency decreased with increasing treatment time.At 60 °C, after 60 min of treatment, the potency remained at 7.29 × 10 4 PFU/mL.At temperatures ≥65 °C, the potency rapidly decreased, with a 7-log reduction after 60 min.At 70 °C, the activity was completely lost after 15 min of treatment.

UV Radiation Tolerance
Bacteriophage RH-42-1 exhibited a gradual decrease in potency with prolonged UV radiation, as shown in Figure 5.After continuous exposure for 60 min, there was approximately a 2-log reduction, after 150 min, a 7-log reduction, and after 180 min, complete

UV Radiation Tolerance
Bacteriophage RH-42-1 exhibited a gradual decrease in potency with prolonged UV radiation, as shown in Figure 5.After continuous exposure for 60 min, there was approximately a 2-log reduction, after 150 min, a 7-log reduction, and after 180 min, complete inactivation.This indicates that bacteriophage RH-42-1 has some tolerance to 60 min of UV radiation.and c) denotes the presence of statistically significant differences (p < 0.05) within the observed data.

UV Radiation Tolerance
Bacteriophage RH-42-1 exhibited a gradual decrease in potency with prolonged UV radiation, as shown in Figure 5.After continuous exposure for 60 min, there was approximately a 2-log reduction, after 150 min, a 7-log reduction, and after 180 min, complete inactivation.This indicates that bacteriophage RH-42-1 has some tolerance to 60 min of UV radiation.

Other Chemicals Tolerance
The results indicate that CHCl3, C3H8O, and 3% H2O2 had minimal impact on the lytic ability of bacteriophage RH-42-1, with a decrease of approximately 1 log in potency within

Other Chemicals Tolerance
The results indicate that CHCl 3 , C 3 H 8 O, and 3% H 2 O 2 had minimal impact on the lytic ability of bacteriophage RH-42-1, with a decrease of approximately 1 log in potency within 12 h, indicating strong tolerance (Figure 6).However, 75% ethanol significantly affected the bacteriophage, leading to a reduction of approximately 4 logs in potency.
Viruses 2024, 16, x FOR PEER REVIEW 10 of 18 12 h, indicating strong tolerance (Figure 6).However, 75% ethanol significantly affected the bacteriophage, leading to a reduction of approximately 4 logs in potency.

Genomic Features of Bacteriophage RH-42-1
The complete genome of bacteriophage RH-42-1 was sequenced and subjected to comparative genomic analysis.The results revealed that the genome of bacteriophage RH-42-1 is a linear double-stranded DNA molecule with a size of 14,942 bp and a GC content of 48.19% (NCBI accession number: PP099880).The genome map is presented in Figure 7.

Genomic Features of Bacteriophage RH-42-1
The complete genome of bacteriophage RH-42-1 was sequenced and subjected to comparative genomic analysis.The results revealed that the genome of bacteriophage RH-42-1 is a linear double-stranded DNA molecule with a size of 14,942 bp and a GC content of 48.19% (NCBI accession number: PP099880).The genome map is presented in Figure 7.The genome contains 28 open reading frames (ORFs), out of which 25 have been functionally annotated, encoding structural proteins, DNA replication and regulatory proteins, perforin, and endolysin, among others.It possesses a holin-lysin system associated with bacterial lysis, including endolysin (accession number YP_338008.1)and holin (accession number AAX45661.1).Three ORFs were annotated as hypothetical proteins (Table 4).No tRNA genes were found, indicating the high dependence of bacteriophage RH-42-1 on the host's translation machinery.The genome lacks antibiotic resistance genes and genes related to virulence factors, suggesting its suitability for safe applications without the risk of interspecies gene transfer.Comparative analysis of the complete genome sequence of bacteriophage RH-42-1 with the GenBank database and the construction of a phylogenetic tree (Figure 8) demonstrated that this bacteriophage clusters with the Tectiviridae family.It exhibits high homology (95.34%~97.55%)with Tectiviridae, Alphatectivirus, and five bacteriophages from the Enterobacteria phage family: PR3 (AY848685.1),L17 (AY848684.1),PRD1 (NC001421.2),PR4 (NC007451.1),and the Burkholderia phage vB_Bco-CSP1 (OQ674210.1),placing them in the same evolutionary branch.
Furthermore, the conserved protein-coding genes, terminase large subunit, and major capsid protein of bacteriophage RH-42-1 were compared with others in the GenBank database.The amino acid sequence of the major capsid protein of RH-42-1 showed high homology (99.49-99.56%)with five bacteriophages from the database (Figure 9).The amino acid sequence of the terminase large subunit exhibited high homology (98.24-99.56%)with four bacteriophages from the database (Figure 10).The phylogenetic tree, construction based on these highly similar bacteriophages, consistently placed RH-42-1 within the Tectiviridae family, Alphatectivirus genus, with the closest relationship to Enterobacteria phage PRD1 (NC 001421.2).
In conclusion, bacteriophage RH-42-1 is identified as a member of the Tectiviridae family, Alphatectivirus genus.

Discussion
Numerous studies have highlighted the strong host specificity, rapid replication, and potent antibacterial properties of lytic bacteriophages.They show promising applications in the safe and effective control of pathogenic bacteria in both plants and animals, addressing issues related to bacterial resistance and rapid detection [27].Therefore, the identification of bacteriophages with strong lytic activity against target pathogenic bacteria and high stability is crucial for the development of bacteriophage-based biocontrol agents.The key to isolating virulent bacteriophages lies in the collection, enrichment, and purification of environmental samples containing bacteriophages.In this study, using E. amylovora strains isolated from Xinjiang as the target host bacteria, bacteriophages were isolated from 134 soil samples collected around severely affected fire blight orchards.Only 22 samples yielded bacteriophage plaques, and among them, 20 samples had very small plaques that could not be consistently formed during purification, indicating the possible presence of weak or temperate bacteriophages.Two samples produced large and clear plaques, from which two bacteriophages were purified.Among them, bacteriophage RH-42-1 produced plaques that were large, uniform, transparent, with high efficacy and stability, exhibiting the typical characteristics of lytic bacteriophages.
The fire blight pathogen exists in ulcerous lesions on branches, diseased branches, leaves, fruits, orchard soil, and irrigation water [28].Although efforts have been made in the preliminary stages of this study to isolate bacteriophages from materials such as bark, branches, and soil from orchards with fire blight, only soil samples yielded bacteriophages.Similarly, Meczker et al. [29] isolated bacteriophages belonging to the Siphoviridae family from soil samples collected from apple orchards affected by fire blight.They suggested that orchard soil during disease outbreaks could be a suitable source for selecting bacteriophages against the target bacteria.This finding aligns with the results of the current study.
Compared with phage isolation from the soil of an Xanthomonas-infected rice paddy, the current study had a lower probability of isolating virulent bacteriophages against fire blight bacteria [30].This difference might be attributed to the use of a mixture of five strains of fire blight bacteria as the target host in this study.Due to the strong specificity of bacteriophages, the selection for infection of different strains within the fire blight bacteria might have led to the failure of some bacteriophages with strong specificity that could not infect the mixed host strains to be isolated.This result suggests that, when isolating lytic bacteriophages, it is advisable to mix multiple strains from different sources as target host bacteria, which can increase the success rate of isolation.A bacteriophage's host range is closely related to the source of its isolation material.Balogh et al. [31] isolated bacteriophages against X. axonopodis pv.citri from citrus canker lesions and found that the host range was narrow.In contrast, bacteriophages isolated from soil and sewage had a broader host range.Bacteriophage RH-42-1, isolated from soil, could lyse five different strains of fire blight bacteria from different sources and hosts but could not lyse the nine other strains of fire blight bacteria tested.Additionally, it did not lyse one strain of E. coli, one strain of P. syringae, one strain of B. amyloliquefaciens and three strains of B. velezensis, preliminarily indicating its host specificity.
This phenomenon was also observed by Natalya V et al. [32] and Akremi et al. [14] who identified the fire blight bacteriophages Loshitsa2 and Micant from soil, which can lyse six strains of the pathogen E. amylovora but cannot lyse the others.Akremi et al. [14] isolated the fire blight bacteriophage PEar6 from soil, which can lyse eight strains of the fire blight pathogen, but not for others.It has been reported that bacteriophages isolated from environmental samples with low host density have a wider host range than those from samples with high host density [33].To obtain bacteriophages with a broader spectrum and wider applications, future work may consider collecting samples from orchards with mild occurrences of fire blight or healthy orchards for bacteriophage isolation.
Different bacteriophages have different latent periods, burst times, and burst sizes.Kim et al. [34] isolated the fire blight bacteriophage pEp_SNUABM_08, which has a latent period of 40 min and a burst size of 20 phages.Akremi et al. [14] isolated the fire blight bacteriophage PEar 6, which has a latent period of 20 min, a rising burst period of 25 min, and a burst size of about 280 PFU/cell.Compared with the above fire blight bacteriophages, PEar 6 belongs to a bacteriophage category with short latent periods and long burst times.This indicates that this bacteriophage has strong replication activity and can invade and lyse the host bacteria in a short time.
The activity of bacteriophages sprayed onto the surface of plants can be affected by various environmental factors in real-world applications, which directly affects the bactericidal effect.Understanding the adaptability of bacteriophages to environmental factors is the basis for evaluating their application potential in biocontrol, and it also provides a reference for the subsequent research and development of bacteriophage preparations and application technology.Those phages have with variety of characteristics.Park et al. [35] isolated the fire blight bacteriophage PhiEap-8, which exhibited tolerance to temperatures up to 50 • C, pH ranging from 4 to 11, and 60 min of UV irradiation.Jo et al. [36] isolated the fire blight bacteriophage pEp_SNUABM_03, which showed tolerance to temperatures up to 40 • C and pH levels between 4 and 9. Choe et al. [37] isolated the fire blight bacteriophage ΦFifi106, which maintained certain activity at temperatures up to 50 • C, pH levels between 4 and 11, and under 6 h of UV irradiation.
The bacteriophage RH-42-1 maintained a titer of 7.29 × 10 4 PFU/mL after being treated at 60 • C for 60 min, showing a high temperature resistance.The bacteriophage has a strong resistance to an alkaline environment and can still maintain high activity in a strongly alkaline environment of pH 10-11.The bacteriophage RH-42-1 has a certain tolerance to short-term (60 min) ultraviolet radiation.It exhibited a certain level of resistance to 5% chloroform, 5% isopropanol, and 3% hydrogen peroxide, but sensitivity to 75% ethanol.
Regarding the morphology of the fire blight pathogen phages.Muller et al. [38] isolated the fire blight bacteriophages φEa1 and φEa100, which, respectively, exhibited icosahedral heads with diameters of 59.89 ± 1.49 nm and 61.42 ± 2.14 nm, both belonging to the Podoviridae family.φEa116 possessed an icosahedral head with a diameter of 73.036 ± 1.89 nm and a non-contractile tail measuring 114.42 ± 2.51 nm in length, classified under the Myoviridae family.Miloud Sabri et al. [39] isolated the fire blight bacteriophage IT22, featuring an icosahedral head measuring 90.00 ± 5.00 nm in length and 75.00 ± 3.00 nm in width, with a contracted tail length of 100.00 ± 10.00 nm, belonging to the Inoviridae family.Through electron microscopy observation, the bacteriophage RH-42-1 isolated in this study exhibited a tadpole-like morphology, with an icosahedral head diameter of 69.44 ± 1.96 nm and a short, non-contractile tail measuring 21.13 ± 3.30 nm in length.Combining whole-genome sequencing and conservative protein functional gene phylogenetic analysis, the fire blight bacteriophage RH-42-1 was identified as belonging to the genus Alphatectivirus of the family Tectiviridae.
The currently reported fire blight bacteriophages are mainly classified into Podoviridae [38], Myoviridae [40], and Inoviridae [39].However, through TEM, genome sequencing, and conservative protein gene analysis, the bacteriophage RH-42-1 was identified as a member of the Tectiviridae family, Alphatectivirus genus.The reported hosts of Tectiviridae bacteriophages include P. fluorescens [41], Bacillus [42], Streptomyces, and Gluconobacter [43].There is no host report on E. amylovora.The bacteriophage RH-42-1 isolated in this study is the first report of E. amylovora as the host bacterium of a Tectiviridae bacteriophage.
Whole-genome sequencing and phylogenetic analysis of conserved protein functional genes revealed that the fire blight pathogen phage RH-42-1 belongs to the family Tectiviridae, genus Alphatectivirus.Comparison with the reference PRD1 phage from the International Committee on Taxonomy of Viruses (ICTV) database showed several key differences.Unlike PRD1, which has 13 genes located on the negative strand, RH-42-1 has only 2 genes on the negative strand, with the remaining genes on the positive strand.Additionally, nine proteins encoded by RH-42-1 displayed amino acid sequence variations compared to their PRD1 counterparts.
Additionally, differences exist between them in certain characteristics.Bamford et al. [44] reported that PRD1 bacteriophages isolated from sewage are sensitive to chloroform, whereas RH-42-1 bacteriophages isolated in this study from soil exhibit tolerance to chloroform.PRD1 bacteriophages infect host bacteria of the pseudomonads and Enterobacteriaceae families containing P or W incompatible plasmids and rely on host plasmids for replication [45]; whereas, RH-42-1 infects host bacteria of the fire blight bacterium which commonly contain the PEA29 plasmid, and some strains contain plasmids such as PEA68, PEA34, PEA72, and PEA8.7 [46].However, whether RH-42-1 relies on host bacterial plasmids for replication and whether the host bacteria contain incompatible group plasmids require further investigation and confirmation.
Whole genome sequencing analysis showed that the bacteriophage RH-42-1 has lysozyme and perforin, but does not contain integrase, transposase, antibiotic resistance genes, and virulence factors, which supports the notion that the bacteriophage belongs to the range of lytic bacteriophages that can be safely applied.

Conclusions
This study successfully isolated a lytic bacteriophage, RH-42-1, against E. amylovora, the causal agent of fire blight, from disease-affected areas in Xinjiang, China.Through characterization and genomic analysis, bacteriophage RH-42-1 was identified as a member of the Tectiviridae family, specifically belonging to the Alphatectivirus genus.Notably, this marks the first report of a Tectiviridae bacteriophage infecting E. amylovora.
Compared to other reported lytic bacteriophages against E. amylovora, RH-42-1 exhibited unique characteristics.In conclusion, bacteriophage RH-42-1, isolated from fire blight affected areas in Xinjiang, China, represents a promising candidate for the biological control of E. amylovora.Its unique biological characteristics, strong lytic activity, and environmental resilience make it a valuable resource for future studies and the development of bacteriophage-based biocontrol agents.

1 Figure 2 .
Figure 2. One-step growth curve of phage RH-42-1 on Erwinia amylovora KER-1 at different tim points.Data points represent the mean of three independent experiments.The standard error of th mean is shown by error bars.

Figure 2 .
Figure 2. One-step growth curve of phage RH-42-1 on Erwinia amylovora KER-1 at different time points.Data points represent the mean of three independent experiments.The standard error of the mean is shown by error bars.

3. 5 .
Tolerance of Bacteriophage RH-42-1 3.5.1.Temperature Tolerance The ability of bacteriophage RH-42-1 to lyse under different temperature conditions is shown in Figure 3.At temperatures ≤45 • C, RH-42-1 maintained high activity, and its potency remained relatively stable within the first 60 min of treatment.When the temperature was ≥55 • C, the activity of the bacteriophage started to decrease, and potency decreased with increasing treatment time.At 60 • C, after 60 min of treatment, the potency remained at 7.29 × 10 4 PFU/mL.At temperatures ≥65 • C, the potency rapidly decreased, with a 7-log reduction after 60 min.At 70 • C, the activity was completely lost after 15 min of treatment.3.5.Tolerance of Bacteriophage RH-42-1 3.5.1.Temperature Tolerance

Figure 3 .
Figure 3. Tolerance of phage RH-42-1 to varying temperatures.The standard error of the mean is depicted by error bars.

Figure 4 .
Figure 4. Tolerance of Phage RH-42-1 to Varied pH Levels.Error bars represent the standard error of the mean.The utilization of distinct letters (e.g., a, b, and c) denotes the presence of statistically significant differences (p < 0.05) within the observed data.

Figure 4 .
Figure 4. Tolerance of Phage RH-42-1 to Varied pH Levels.Error bars represent the standard error of the mean.The utilization of distinct letters (e.g., a, b, and c) denotes the presence of statistically significant differences (p < 0.05) within the observed data.

Figure 4 .
Figure 4. Tolerance of Phage RH-42-1 to Varied pH Levels.Error bars represent the standard error of the mean.The utilization of distinct letters (e.g., a, b, and c) denotes the presence of statistically significant differences (p < 0.05) within the observed data.

Figure 5 .
Figure 5. Phage RH-42-1 Tolerance to Ultraviolet Radiation.Error bars depict the standard error of the mean.

Figure 5 .
Figure 5. Phage RH-42-1 Tolerance to Ultraviolet Radiation.Error bars depict the standard error of the mean.

Figure 6 .
Figure 6.Effect of Different Chemicals on Phage RH-42-1 Viability.Standard error of the mean is shown by error bars.Consider specifying the tested chemicals for clarity.The utilization of distinct letters (e.g., a, b, c) denotes the presence of statistically significant differences (p < 0.05) within the observed data.

Figure 6 .
Figure 6.Effect of Different Chemicals on Phage RH-42-1 Viability.Standard error of the mean is shown by error bars.Consider specifying the tested chemicals for clarity.The utilization of distinct letters (e.g., a, b, c) denotes the presence of statistically significant differences (p < 0.05) within the observed data.

Figure 9 .
Figure 9. Phylogenetic Relationship of Phage RH-42-1 Based on Its Major Capsid Protein Sequen The red text indicates the phage RH-42-1 isolated in this study.

Figure 8 .Figure 8 .
Figure 8. Phylogenetic Analysis of Phage RH-42-1 Based on its Complete Genome.The red text indicates the phage RH-42-1 isolated in this study.

Figure 9 .
Figure 9. Phylogenetic Relationship of Phage RH-42-1 Based on Its Major Capsid Protein S The red text indicates the phage RH-42-1 isolated in this study.

Figure 9 .
Figure 9. Phylogenetic Relationship of Phage RH-42-1 Based on Its Major Capsid Protein Sequence.The red text indicates the phage RH-42-1 isolated in this study.

Figure 9 .
Figure 9. Phylogenetic Relationship of Phage RH-42-1 Based on Its Major Capsid Protein S The red text indicates the phage RH-42-1 isolated in this study.

Figure 10 .
Figure 10.Phylogenetic Relationship of Phage RH-42-1 Determined by Its Terminase Large Subunit Sequence.The red text indicates the phage RH-42-1 isolated in this study.

Author Contributions:
Conceptualization, M.L. and L.S.; methodology, H.X., Q.S. and M.L.; investigation, H.X. and Q.S.; data analysis, H.X., B.F. and M.L.; writing-original draft, H.X. and B.F.; writing-review and editing, H.X., B.F. and M.L.All authors have read and agreed to the published version of the manuscript.Funding: Key Project of the Natural Science Foundation of Xinjiang Uygur Autonomous Region (2021D01D12); National Key Research and Development Program (2021YFD1400200).

Table 1 .
Erwinia amylovora Strains Employed in this Investigation.