Phosphomimetic S207D Lysyl–tRNA Synthetase Binds HIV-1 5′UTR in an Open Conformation and Increases RNA Dynamics

Interactions between lysyl–tRNA synthetase (LysRS) and HIV-1 Gag facilitate selective packaging of the HIV-1 reverse transcription primer, tRNALys3. During HIV-1 infection, LysRS is phosphorylated at S207, released from a multi-aminoacyl–tRNA synthetase complex and packaged into progeny virions. LysRS is critical for proper targeting of tRNALys3 to the primer-binding site (PBS) by specifically binding a PBS-adjacent tRNA-like element (TLE), which promotes release of the tRNA proximal to the PBS. However, whether LysRS phosphorylation plays a role in this process remains unknown. Here, we used a combination of binding assays, RNA chemical probing, and small-angle X-ray scattering to show that both wild-type (WT) and a phosphomimetic S207D LysRS mutant bind similarly to the HIV-1 genomic RNA (gRNA) 5′UTR via direct interactions with the TLE and stem loop 1 (SL1) and have a modest preference for binding dimeric gRNA. Unlike WT, S207D LysRS bound in an open conformation and increased the dynamics of both the PBS region and SL1. A new working model is proposed wherein a dimeric phosphorylated LysRS/tRNA complex binds to a gRNA dimer to facilitate tRNA primer release and placement onto the PBS. Future anti-viral strategies that prevent this host factor-gRNA interaction are envisioned.


Introduction
The fundamental property that distinguishes retroviruses from other RNA viruses is the use of a specific host tRNA as a primer to reverse transcribe their genomic RNA (gRNA) into double-stranded proviral DNA. In HIV-1, human tRNA Lys3 serves as the primer and is selectively packaged into virions along with the other major tRNA Lys isoacceptors, tRNA Lys1,2 [1,2]. Canonically, mammalian tRNAs are virtually always protein-bound [3] and are generally present in the aminoacylated state inside cells [4]. Lysyl-tRNA synthetase (LysRS), the only cellular factor known to interact specifically with all tRNA Lys isoacceptors, is selectively packaged into HIV-1 [5]. LysRS and tRNA Lys are packaged in equimolar proportions, and siRNA knockdown of LysRS resulted in similarly reduced levels (~70%) of

Preparation of Recombinant LysRS Variants
Plasmid pCDNA3∆N65.LysRS [22] was mutated using site-directed ligase-independent mutagenesis [23] to make pCDNA3.207DLysRS [15]. These plasmids, which encode Histagged human WT LysRS(∆N65) and S207D LysRS(∆N65) were transformed into E. coli strain BL21(DE3) CP-RIL, and proteins were prepared as follows. Starter cultures were grown overnight in 50 mL of LB media containing 100 µg/mL ampicillin at 37 • C. A 10 mL aliquot of this culture was added to 1 L of LB media containing 100 µg/mL ampicillin and grown for 90 min at 37 • C. After cooling cells to room temperature for 15 min, protein expression was induced using 0.1 mM isopropyl-β-D-1-thiogalactopyranoside (IPTG) and incubated in a room temperature shaker overnight (~16 h). Cells were harvested by centrifugation at 8000× g for 15 min at 4 • C followed by resuspension of the cell pellet in 20 mL of lysis buffer (50 mM Na 2 HPO 4 , pH 7.5, 300 mM NaCl, 20 mM imidazole, and 1 protease inhibitor tablet (Roche) per liter). The cells were lysed by sonication for 12 cycles of 15 s of sonication followed by 45 s of rest. Polyethylenimine (0.5% w/v final concentration) was added, and the solution was stirred gently for 30 min at 4 • C and cleared of cellular debris by centrifugation at 27,000× g for 15 min at 4 • C. Unwanted protein was precipitated by the addition of 375 mg/mL ammonium sulfate, incubated at room temperature for 15 min, and pelleted by centrifugation at 27,000× g for 15 min at 4 • C. The pellet was washed with 50 mL of lysis buffer supplemented with 375 mg/mL ammonium sulfate and re-centrifuged at 27,000× g for 15 min at 4 • C. The pellet was resuspended in 20 mL of lysis buffer and further centrifuged at 27,000× g for 15 min at 4 • C to remove insoluble debris. The supernatant was loaded onto a Ni-NTA (Sigma) column and washed with lysis buffer containing 20 mM imidazole. LysRS constructs were eluted using increasing amounts of imidazole and fractions containing hLysRS∆N65 were combined and concentrated using 30 K molecular weight cut-off centrifugal filter units (Amicon) by centrifuging at 3200× g at 4 • C. The concentrated protein was then dialyzed overnight in a 10 K molecular weight cut-off Slide-A-Lyzer dialysis cassette (Thermo Scientific) into 2× storage buffer (80 mM HEPES, pH 7.5, 300 mM NaCl, 4 mM dithiothreitol, and 1 protease inhibitor tablet (Roche) per liter). After dialysis, the protein solution was further concentrated using 30 K molecular weight cut-off centrifugal filter units (Amicon) by centrifuging at 3200× g at 4 • C. The concentrated protein solution was diluted with 1 volume of 80% glycerol (40% final) and the concentration was determined using the Bradford assay (Bio-Rad) and stored at −20 • C. The concentration determined by the Bradford assay was multiplied by a correction factor of 1.35 (determined previously by total amino acid analysis) to yield the true concentration. Since hLysRS∆N65 tends to aggregate after extended periods of storage (>6 months), freshly prepared protein was used for all experiments.

Preparation and Purification of RNAs and DNA-Primer-Annealed RNA Complexes
All DNA oligonucleotides used in this study (antiPBS 18 , antiPBS 18 +3, antiPBS 18 +6, and antiPBS 18 +11) were purchased from IDT (Coralville, IA, USA) and used without further purification. All RNAs-tRNA Lys3 , PBS/TLE, UTR 240 , UTR 240 (∆DIS), and UTR 240 (∆DIS, ∆PBS)-were prepared by in vitro transcription using T7 RNA polymerase and purified using denaturing (8 M urea) polyacrylamide gel electrophoresis (PAGE). Human tRNA Lys3 was prepared from a plasmid purchased from IDT (pIDTSmart-htRNALys3) containing the tRNA Lys3 sequence flanked by a T7 promoter on the 5 side and a FokI restriction site on the 3 side. PBS/TLE, corresponding to nucleotides (nt) 126 to 224 of the HIV-1 gRNA with an additional three 5 G and three 3 C nucleotides to enable efficient transcription, was transcribed from a FokI-digested plasmid as described [17,19]. UTR 240 and UTR 240 (∆DIS), corresponding to nt 106-345 of HIV-1 gRNA, were PCR amplified from plasmids containing the WT sequence or a dimerization-defective mutant, where the dimerization initiation site (DIS) palindrome (5 AAGCGCGCA 3 ) was replaced by a GAGA tetraloop (∆DIS). The plasmids contained two additional mutations corresponding to U106G and U108C, and the reverse primer contained two mutations corresponding to U342C and G345C. The mutations allowed for efficient transcription by encoding two 5 guanosines and helped to stabilize the UTR 240 stem. The PCR products were used as templates for in vitro transcription. To determine an optimal RNA:DNA primer ratio for preparing DNA primerannealed PBS/TLE, the RNA/DNA complex was heated to 80 • C for 2 min, 60 • C for 4 min, followed by the addition of MgCl 2 to 1 mM, incubating at 37 • C for 6 min, and cooling on ice for at least 30 min. Complexes were analyzed by native PAGE ( Figure S1) and the optimal ratio was determined to be 1:1.5 for PBS/TLE:DNA primer.
FTSC-labeled UTR 240 RNAs were folded in 50 mM HEPES, pH 7.5 by heating at 80 • C for 2 min, 60 • C for 2 min followed by the addition of 10 mM MgCl 2 , and 37 • C for 15 min, then incubating them on ice for at least 30 min. PBS/TLE and DNA-primerannealed PBS/TLE complexes were prepared with FTSC-labeled PBS/TLE alone or in the presence of a 1.5 molar excess of DNA primer in 50 mM HEPES, pH 7.5 and refolding them using the heating strategy described above with the 37 • C incubation step shorted to 6 min. FA binding assays were performed as previously described [17] with minor modifications. Refolded fluorescently labeled RNAs (20 nM) were mixed with varying concentrations of WT or S207D LysRS(∆N65) by serial dilution from 10 µM to 16 nM in 20 mM Tris-HCl, pH 8, 15 mM NaCl, 35 mM KCl and 1 mM MgCl 2 . Anisotropy was measured by excitation at 485 nm with the emission read at 525 nm. The data points were fit assuming 1:1 binding [26]. All FA binding data are reported as the average and standard deviation of three independent experiments.

UV Crosslinking with SHAPE (XL-SHAPE) Experiments
Purified in vitro transcribed WT UTR 240 RNAs in complex with WT and S207D LysRS(∆N65) were probed by selective 2 -hydroxyl acylation analyzed by primer extension (SHAPE) using N-methylisotoic anhydride (NMIA) (Sigma-Aldrich) as described, with minor variations [16,27]. Briefly, RNAs (5 µM) were folded in buffer containing 50 mM HEPES, pH 7.5 and 1 mM MgCl 2 , as described above, and then diluted to 0.5 µM in 20 mM HEPES, pH 7.5, 60 mM NaCl, 10 mM KCl and 1 mM MgCl 2 , as well as different concentrations of the corresponding LysRS variant (2.5, 7.5, 15 and 25 µM). Each reaction (10 µL) was incubated at room temperature for 30 min to allow the binding to reach equilibrium. Reactions were initiated with 1 µL NMIA (80 mM stock in DMSO) or neat DMSO for the (+) and (−) reactions, respectively, and incubated at 37 • C for 30 min followed by phenol-chloroform extraction and ethanol precipitation. For RNA-only controls, protein storage buffer was added instead of protein. The following six reactions were included in each experiment: a control reaction of RNA with DMSO, RNA with NMIA, and RNA with NMIA in the presence of the four noted concentrations of LysRS.
For crosslinking analyses, RNA:LysRS complexes were prepared as described for SHAPE. Samples (10 µL) were crosslinked on ice in a Stratalinker 2400 UV crosslinker (Stratagene) using a total energy of 200 mJ/cm 2 . Non-crosslinked control samples were incubated on ice for the same amount of time. The following six reactions were included in each experiment: a no protein/no UV background, RNA only with crosslinking, and RNA incubated with the four different concentrations of LysRS noted above. Following the crosslinking reactions, protein was denatured with 1 µL of 5% SDS (0.5% final) followed by the addition of 1 µL of Proteinase K (800 U/mL, New England Biolabs, Ipswich, MA, USA) and incubation at 55 • C for 60 min. RNA was recovered by phenol-chloroform extraction and ethanol precipitation. RNA samples from both SHAPE and crosslinking experiments were resuspended in 9 µL RNase-free water followed by the addition of dNTP mix (1 µL of 10 mM each) and 2 µL of 5 µM 5 -NED TM labeled primer (Applied Biosystems, Waltham, MA, USA; Life Technologies, Carlsbad, CA, USA) and incubation at 85 • C for 1 min, 60 • C for 5 min, 35 • C for 5 min and 50 • C for 10 min. Reverse transcription mix (8 µL) containing 1 µL of SuperScript III (200 U/µL), 4 µL 5× first-strand buffer, 2 µL 0.1 M DTT and 1 µL MiliQ H 2 O was then added. Samples were incubated at 55 • C for 1 h and inactivated at 70 • C for 15 min following the manufacturer's protocol (Invitrogen). RNA was hydrolyzed with 1 µL of 4 M NaOH and incubated at 95 • C for 3 min. Samples were cooled on ice and neutralized with 2 µL of 2 M HCl. A description of the primers used for these experiments can be found in Table S1.
Dideoxy sequencing reactions were conducted on the same DNA template used for the in vitro transcription of the UTR 240 constructs, using the Thermo Sequenase Cycle Sequencing Kit (Affymetrix) and the same NED TM -labeled primers as those used for primer extension (Table S1). Sequencing reactions containing 200 ng DNA template and 1 pmol NED TM -labeled primer were heated to 95 • C for 1 min followed by 60 cycles of 95 • C for 30 s, 55 • C for 30 s and 72 • C for 1 min in a T100 thermal cycler (Bio-Rad). Sequencing reactions were performed independently with each NED TM -labeled primer. Primer extension products from the SHAPE experiments, crosslinking experiments and sequencing reactions were analyzed by capillary electrophoresis on an Applied Biosystems 3730 DNA Analyzer (Genomics Shared Resources Facility, The Ohio State University, Columbus, OH, USA) after resuspension of the cDNA pellets in formamide and mixing with GeneScan™ 600 LIZ ® Size Standard (Applied Biosystems, Waltham, MA, USA) for inter-capillary alignment as described [28].
Raw electropherograms were converted to normalized SHAPE reactivity using the ribonucleic acid capillary-electrophoresis analysis tool (RiboCAT) [28]. Peak areas for each of the six reactions were calculated and then scaled to the RNA-only background reaction. At least three independent experiments were performed and the data from each independent trial were analyzed individually to generate average SHAPE reactivities. The differences between the SHAPE reactivity of the free RNA and that of the reaction in the presence of the highest protein concentration were analyzed by an unpaired two-tail Student's t-test. Statistical significance was attributed to peaks characterized by an absolute difference in SHAPE reactivity of ≥ 0.3 arbitrary units and a p-value < 0.05 between the RNA-only control and the highest protein concentration sample [29]. In addition, only those peaks for which a dose-dependence could be observed were deemed significant.

Small-Angle X-ray Scattering (SAXS) Analysis
The UTR 240 (∆DIS) and UTR 240 (∆DIS, ∆PBS) constructs (400 µg) were refolded in a volume of 200 µL by heating in 50 mM HEPES, pH 7.4, to 80 • C for 2 min, 60 • C for 2 min, followed by addition of 10 mM MgCl 2 . The samples were then incubated at 37 • C for 15 min, and on ice for at least 30 min. The folded RNAs were purified by size exclusion chromatography (SEC) on a 24-mL Superdex 200 10/300 GL Increase column (GE Healthcare, Chicago, IL, USA) using a GE ÄKTA purifier in a buffer containing 150 mM NaCl, 50 mM HEPES, pH 7.4, 1 mM MgCl 2 , and 3% glycerol (wt/vol) at a flow rate of 0.5 mL/min. The absorbance of the eluate was monitored at 260 nm. Fractions corresponding to the peak of interest were concentrated to~40 µL and serially diluted to yield three different concentrations for the analysis of each sample. Prior to shipment to the SIBYLS beamline at Lawrence Berkeley National Labs for data collection [30], an aliquot of the highest concentration sample was retained for native PAGE analysis to be performed at the same time the SAXS data were to be collected [31]. There were no signs of degradation or heterogeneity by native PAGE.
SAXS data analysis steps were carried out as previously described [19,31] using the program PRIMUS [32]. Guinier analysis was used to calculate the R g of the RNA, and Kratky analysis was performed to determine the extent of folding [31]. If the Guinier plot displayed non-linearity (a sign of poor-quality data) or Kratky analysis indicated that the RNA was not well-folded, then the data were not analyzed further. The P(r) function was calculated using the program GNOM [32], and the D max and P(r)-based R g was determined using the AUTOGNOM feature. Ab initio envelopes were generated largely as previously described using the ATSAS software suite [19,31,32]. Briefly, 50 ab initio envelopes were generated in jagged mode with no symmetry restraints imposed, and the χ 2 fits and reproducibility (NSD) values were determined. These 50 envelopes were averaged into one envelope, which was then packed with additional "dummy atoms" with an atomic radius of 2.0 Å. This was then used as the starting point for an additional 50 ab initio envelope calculations, generated in expert mode with no symmetry restraints imposed. These envelopes were averaged and filtered to generate the final envelope, and their χ 2 fits and NSD values were calculated.

SEC-SAXS Analysis of Primer-Annealed and LysRS Bound PBS/TLE Complexes
Size-exclusion chromatography coupled with SAXS (SEC-SAXS) was used to analyze complexes to alleviate problems with sample heterogeneity. Each of the DNA primer-annealed PBS/TLE RNA complexes (PBS/TLE annealed to each of the antiPBS 18 , antiPBS 18 +3, antiPBS 18 +6, and antiPBS 18 +11 DNA primers) were prepared using 1 mg total nucleic acid with a 1.5 molar excess of DNA primer and refolded in a volume of 200 µL by heating the sample in 50 mM HEPES, pH 7.4, to 80 • C for 2 min, 60 • C for 4 min, followed by the addition of 10 mM MgCl 2 . The sample was then incubated at 37 • C for 6 min and on ice for at least 30 min. For LysRS-bound PBS/TLE complexes, PBS/TLE was first refolded as described for the primer-annealed PBS/TLE complexes and purified by SEC on a 24-mL Superdex 200 10/300 GL Increase column (GE Healthcare, Chicago, IL, USA) using a GE ÄKTA purifier in a buffer containing 150 mM NaCl, 50 mM HEPES, pH 7.4, 1 mM MgCl 2 , and 3% glycerol (wt/vol) at a flow rate of 0.5 mL/min. The absorbance of the eluate was monitored at 260 nm. Fractions corresponding to the peak of interest were concentrated tõ 40 µL. Purified PBS/TLE was then incubated with a 1:1 molar ratio of either WT or S207D LysRS for 30 min prior to SEC-SAXS analysis.
SEC-SAXS data were collected at station G1 at the Cornell High Energy Synchrotron Source (CHESS) using the experimental set-up described [33]. Briefly, refolded samples were loaded into a GE ÄKTA Pure M with a 24-mL Superdex 200 10/300 GL Increase column (GE Healthcare, Chicago, IL, USA) and SEC was run in 150 mM NaCl, 50 mM HEPES, pH 7.4, 1 mM MgCl 2 , and 3% glycerol (wt/vol) at a flow rate of 0.5 mL/min. The absorbance of the eluate was monitored at 260 nm. The ÄKTA Pure M is coupled to the beamline such that the sample goes directly from the absorbance detector into a flow-cell in the beamline. The X-ray source was a 1.5 m CHESS Compact Undulator, and X-rays were detected using a Finger Lakes charged-coupled device (CCD). The beam diameter was 250 × 250 µm with a flux of 8.4 × 10 11 photons s −1 and an energy of 9.962 keV. X-ray exposures were taken continuously every 4 s while the SEC eluent passed through the SAXS flow cell. Initial SAXS data processing, including radial averaging and buffer subtraction, was performed using the BioXTAS RAW software program [34]. SAXS exposures (10 × 4 s) corresponding to the RNA peak of interest on the SEC were averaged, and 50 × 4 s SAXS exposures corresponding to the buffer alone were averaged and then used to buffer subtract the RNA average SAXS curve [35]. Average SAXS curves were analyzed as described above. The envelope for PBS/TLE alone was recalculated as described above for SAXS analysis using data from a previously published study [19].

The DIS Contributes to gRNA Binding of Both WT and S207D LysRS(∆N65)
A LysRS(∆N65) variant with the N-terminal 65 residues deleted is more sensitive to specific RNA binding interactions [36], and a truncated form of LysRS in virions likely contains this deletion [5]. Therefore, all experiments described for both the WT and the phosphomimetic S207D mutant were performed in the context of LysRS(∆N65) ( Figure 1A). Previous work investigating LysRS-gRNA binding were performed using WT LysRS(∆N65). This protein specifically binds to the TLE motif [17][18][19], but higher-affinity binding of LysRS(∆N65) to gRNA additionally required regions of the Psi RNA-packaging domain [17,37]. Therefore, to determine whether S207D LysRS(∆N65) retains the same binding characteristics, FA binding assays were performed using 3 fluorescently labeled RNAs corresponding to in vitro transcribed human tRNA Lys3 , the 105-nt PBS/TLE 105 domain alone or constructs (UTR 240 and UTR 240 (∆DIS)) containing both the PBS/TLE and Psi domains. The first nine nucleotides of the gag coding region were included because they contribute to the structure and stability of the packaging signal [38], but the first 104-nt (TAR and polyA hairpins) were excluded because they do not appreciably contribute to LysRS binding [17]. Native PAGE analysis of the WT UTR 240 RNA showed complete dimerization under the conditions used for FA assays ( Figure S2). The ∆DIS variant contains a mutated DIS that eliminates gRNA dimerization ( Figure 1B). To promote transcription efficiency and stabilize the terminal stems, the first U-G base pair was changed to a G-C pair and the two following U-G/G-U wobble pairs were mutated to C-G/G-C pairs, respectively ( Figure 1A). Both WT and S207D LysRS(∆N65) bound tRNA Lys3 and PBS/TLE 105 with similar affinity but bound the Psi-containing WT UTR 240 with approximately two-fold higher affinity (Table 1, Figure S3). This closely matches our previous findings for WT LysRS(∆N65) [17]. Mutation of the DIS palindrome to a GNRA tetraloop ( Figure 1B) reduced affinity back to the level of tRNA Lys3 and PBS/TLE 105 for both LysRS(∆N65) variants. Therefore, the higher binding affinity is either due to specific interactions with the DIS sequence or gRNA dimerization/conformational differences.

The DIS Contributes to gRNA Binding of Both WT and S207D LysRS(ΔN65)
A LysRS(ΔN65) variant with the N-terminal 65 residues deleted is more sensitive to specific RNA binding interactions [36], and a truncated form of LysRS in virions likely contains this deletion [5]. Therefore, all experiments described for both the WT and the phosphomimetic S207D mutant were performed in the context of LysRS(ΔN65) ( Figure  1A). Previous work investigating LysRS-gRNA binding were performed using WT LysRS(ΔN65). This protein specifically binds to the TLE motif [17][18][19], but higher-affinity binding of LysRS(ΔN65) to gRNA additionally required regions of the Psi RNApackaging domain [17,37]. Therefore, to determine whether S207D LysRS(ΔN65) retains the same binding characteristics, FA binding assays were performed using 3′ fluorescently labeled RNAs corresponding to in vitro transcribed human tRNA Lys3 , the 105-nt PBS/TLE105 domain alone or constructs (UTR240 and UTR240(ΔDIS)) containing both the PBS/TLE and Psi domains. The first nine nucleotides of the gag coding region were included because they contribute to the structure and stability of the packaging signal [38], but the first 104-nt (TAR and polyA hairpins) were excluded because they do not appreciably contribute to LysRS binding [17]. Native PAGE analysis of the WT UTR240 RNA showed complete dimerization under the conditions used for FA assays ( Figure S2). The ΔDIS variant contains a mutated DIS that eliminates gRNA dimerization ( Figure 1B). To promote transcription efficiency and stabilize the terminal stems, the first U-G base pair was changed to a G-C pair and the two following U-G/G-U wobble pairs were mutated to C-G/G-C pairs, respectively ( Figure 1A). Both WT and S207D LysRS(ΔN65) bound tRNA Lys3 and PBS/TLE105 with similar affinity but bound the Psi-containing WT UTR240 with approximately two-fold higher affinity (Table 1, Figure S3). This closely matches our previous findings for WT LysRS(ΔN65) [17]. Mutation of the DIS palindrome to a GNRA tetraloop ( Figure 1B) reduced affinity back to the level of tRNA Lys3 and PBS/TLE105 for both LysRS(ΔN65) variants. Therefore, the higher binding affinity is either due to specific interactions with the DIS sequence or gRNA dimerization/conformational differences.  The gray boxed regions indicate the mutation that was made to replace the DIS with a stable GNRA tetraloop (∆DIS). The PBS/TLE domain was also deleted for some studies (∆PBS/TLE) and replaced with GAGA. Nt in gray circles indicate mutations that were made to promote transcription efficiency and stabilize the terminal stem, as described in the Methods. The secondary structure shown is based on Ref [38].

S207D LysRS(∆N65) Binds the PBS/TLE in an Open Conformation
Results of the binding assays suggest that WT and S207D LysRS(∆N65) have similar RNA binding affinities, displaying somewhat higher affinity binding to the dimeric gRNA. SAXS was next used to investigate the structures formed upon WT and S207D LysRS(∆N65) binding to the PBS/TLE RNA. SAXS yields ab initio molecular envelopes that reflect the global fold of the molecule or complex with a calculated maximum dimension (D MAX ). Signs of aggregation, radiation damage or heterogeneity were absent from the obtained SAXS data ( Figure S4). When compared to PBS/TLE alone (D MAX = 123 Å), the binding of WT and S207D LysRS(∆N65) resulted in more extended envelopes with D MAX of 139 and 162 Å, respectively ( Figure 2). The additional envelope density for both complexes corresponds to the region previously mapped to the TLE stem and loop [19]. A previous SAXS analysis of LysRS(∆N65) reported that both WT and S207D variants form stable homodimers, with S207D adopting a more open conformation resulting from a 37-degree rotation of the N-terminal domains of each monomer with respect to their respective catalytic domains [11]. also deleted for some studies (ΔPBS/TLE) and replaced with GAGA. Nt in gray circles indicate mutations that were made to promote transcription efficiency and stabilize the terminal stem, as described in the Methods. The secondary structure shown is based on Ref [38].

S207D LysRS(ΔN65) Binds the PBS/TLE in an Open Conformation
Results of the binding assays suggest that WT and S207D LysRS(ΔN65) have similar RNA binding affinities, displaying somewhat higher affinity binding to the dimeric gRNA. SAXS was next used to investigate the structures formed upon WT and S207D LysRS(ΔN65) binding to the PBS/TLE RNA. SAXS yields ab initio molecular envelopes that reflect the global fold of the molecule or complex with a calculated maximum dimension (DMAX). Signs of aggregation, radiation damage or heterogeneity were absent from the obtained SAXS data ( Figure S4). When compared to PBS/TLE alone (DMAX = 123 Å), the binding of WT and S207D LysRS(ΔN65) resulted in more extended envelopes with DMAX of 139 and 162 Å, respectively ( Figure 2). The additional envelope density for both complexes corresponds to the region previously mapped to the TLE stem and loop [19]. A previous SAXS analysis of LysRS(ΔN65) reported that both WT and S207D variants form stable homodimers, with S207D adopting a more open conformation resulting from a 37-degree rotation of the N-terminal domains of each monomer with respect to their respective catalytic domains [11].

S207D LysRS(ΔN65) Binding Induces gRNA Conformational Flexibility
To characterize both WT and S207D LysRS(ΔN65) binding sites and RNA conformational changes upon protein binding, XL-SHAPE studies were carried out using the WT UTR240 with the capability to dimerize. SHAPE is a single-nt resolution RNA structure probing technique where anhydride SHAPE reagents react with the 2′-hydroxyl of all four nts to form covalent adducts that stop primer extension by reverse transcriptase [39,40]. SHAPE reagents are more reactive to less constrained, unpaired nts [39,41]. SHAPE probing of protein-RNA complexes can be used to identify RNA conformational changes associated with protein binding but cannot reliably identify direct binding sites

S207D LysRS(∆N65) Binding Induces gRNA Conformational Flexibility
To characterize both WT and S207D LysRS(∆N65) binding sites and RNA conformational changes upon protein binding, XL-SHAPE studies were carried out using the WT UTR 240 with the capability to dimerize. SHAPE is a single-nt resolution RNA structure probing technique where anhydride SHAPE reagents react with the 2 -hydroxyl of all four nts to form covalent adducts that stop primer extension by reverse transcriptase [39,40]. SHAPE reagents are more reactive to less constrained, unpaired nts [39,41]. SHAPE probing of protein-RNA complexes can be used to identify RNA conformational changes associated with protein binding but cannot reliably identify direct binding sites [42]. To identify binding sites, UV-crosslinking of the protein:RNA complex was carried out. Protease digestion following UV irradiation leaves a covalent adduct on the RNA that can similarly be characterized by primer extension stops. For both SHAPE and XL experiments, a protein titration was performed with stringent criteria for positives indicated by a dose-dependent Viruses 2022, 14, 1556 9 of 17 reactivity change of >0.3 from the "no protein" control to the highest protein concentration ( Figure S5).
The baseline SHAPE reactivity pattern of the UTR 240 ( Figure 3) closely matches results that we and others have previously reported [16,27,28]. In agreement with binding data ( Table 1), clusters of XL sites were identified in the TLE and SL1 hairpins for both WT and S207D LysRS(∆N65), with very similar XL footprints (Figure 3, asterisks). Three XL sites were also identified in the unstructured PBS loop upon titration of S207D LysRS(∆N65), but not WT. The more flexible "open conformation" of the S207D LysRS(∆N65) [11] may have facilitated the interaction with the PBS loop when compared to the more compact WT protein. Consistent with the binding assays showing higher affinity binding to an RNA construct that also contains SL1, both LysRS(∆N65) constructs directly bind the SL1 stem of the UTR240. Although a higher affinity binding requires the DIS sequence (Table 1), no crosslinks were identified in the palindromic DIS. Only the S207D variant showed XL sites in and proximal to the DIS loop, which could be due to this protein binding in the more open conformation.
Viruses 2022, 14, x FOR PEER REVIEW 9 of [42]. To identify binding sites, UV-crosslinking of the protein:RNA complex was carri out. Protease digestion following UV irradiation leaves a covalent adduct on the RNA th can similarly be characterized by primer extension stops. For both SHAPE and X experiments, a protein titration was performed with stringent criteria for positiv indicated by a dose-dependent reactivity change of >0.3 from the "no protein" control the highest protein concentration ( Figure S5). The baseline SHAPE reactivity pattern of the UTR240 (Figure 3) closely matches resu that we and others have previously reported [16,27,28]. In agreement with binding da ( Table 1), clusters of XL sites were identified in the TLE and SL1 hairpins for both WT a S207D LysRS(ΔN65), with very similar XL footprints (Figure 3, asterisks). Three XL si were also identified in the unstructured PBS loop upon titration of S207D LysRS(ΔN6 but not WT. The more flexible "open conformation" of the S207D LysRS(ΔN65) [11] m have facilitated the interaction with the PBS loop when compared to the more compa WT protein. Consistent with the binding assays showing higher affinity binding to RNA construct that also contains SL1, both LysRS(ΔN65) constructs directly bind the S stem of the UTR240. Although a higher affinity binding requires the DIS sequence (Tab 1), no crosslinks were identified in the palindromic DIS. Only the S207D variant show XL sites in and proximal to the DIS loop, which could be due to this protein binding in t more open conformation.

The Monomeric UTR240(ΔDIS) Adopts an Extended Cruciform-like Conformation
The binding assays and XL data suggest that both LysRS(ΔN65) constructs direc bind the TLE and SL1 stems of the UTR240 and do not interact directly with the D Figure 3. XL-SHAPE results for LysRS(∆N65) variants binding to WT UTR 240 . The baseline SHAPE reactivities are shown as colored circles behind each nt. Grey circles indicate the region of the structure that was not probed in our studies. SHAPE reactivity changes that occurred upon titration of WT LysRS(∆N65) (left) and S207D LysRS(∆N65) (right) are identified with colored arrows (red = increased reactivity, blue = decreased reactivity) and crosslinked sites are denoted with asterisks.
Despite their similar binding affinity and XL footprints, a larger number of SHAPE reactivity changes resulted from S207D LysRS(∆N65) binding when compared to WT LysRS(∆N65) (25 and 3, respectively). Indeed, 22 of the 25 differences upon titration of S207D LysRS(∆N65) are increases in SHAPE reactivity, located predominantly in the PBS loop and SL1 stem (Figure 3, red arrows), indicating an increase in the conformational flexibility of these regions. The binding of both proteins resulted in reduced flexibility (Figure 3, blue arrows) at the 3 side of the TLE loop, likely because of protein binding.

The Monomeric UTR 240 (∆DIS) Adopts an Extended Cruciform-like Conformation
The binding assays and XL data suggest that both LysRS(∆N65) constructs directly bind the TLE and SL1 stems of the UTR 240 and do not interact directly with the DIS sequence. SAXS was next used to determine the overall tertiary fold of the UTR 240 (∆DIS) gRNA construct. The SAXS data showed no signs of aggregation, radiation damage or heterogeneity ( Figure S6). The resulting SAXS-derived ab initio molecular envelope revealed a cruciform-like shape ( Figure 4A). Furthermore, one appendage has a distinct Lshaped structure expected of the PBS/TLE domain [19]. To map the region of the envelope corresponding to the PBS/TLE, we also performed SAXS analysis of a truncated 145-nt UTR 240 (∆DIS, ∆PBS/TLE) RNA with a GAGA tetraloop inserted in place of the PBS/TLE domain. PBS/TLE truncation resulted in a structural model wherein the L-shaped region is missing from the ab initio envelope ( Figure 4B, blue spheres). A structure corresponding to the UTR 240 (∆DIS) with the PBS/TLE domain replaced with a tetraloop, termed the "core encapsidation signal", was previously determined by NMR [38]. To assign the remaining domains, we overlayed the SL1, SL3 and U5:AUG stem loops from the reported NMR structure into our SAXS-derived model using the size and shape of each stem loop as a guide ( Figure 4C). We found excellent agreement with one cruciform arm and SL1 domain from the NMR structure ( Figure 4C, orange), and were also able to fit the remaining helices from the NMR structure into our envelope ( Figure 4C, red, yellow, purple). gRNA construct. The SAXS data showed no signs of aggregation, radiation damage or heterogeneity ( Figure S6). The resulting SAXS-derived ab initio molecular envelope revealed a cruciform-like shape ( Figure 4A). Furthermore, one appendage has a distinct L-shaped structure expected of the PBS/TLE domain [19]. To map the region of the envelope corresponding to the PBS/TLE, we also performed SAXS analysis of a truncated 145-nt UTR240(ΔDIS, ΔPBS/TLE) RNA with a GAGA tetraloop inserted in place of the PBS/TLE domain. PBS/TLE truncation resulted in a structural model wherein the Lshaped region is missing from the ab initio envelope ( Figure 4B, blue spheres). A structure corresponding to the UTR240(ΔDIS) with the PBS/TLE domain replaced with a tetraloop, termed the "core encapsidation signal", was previously determined by NMR [38]. To assign the remaining domains, we overlayed the SL1, SL3 and U5:AUG stem loops from the reported NMR structure into our SAXS-derived model using the size and shape of each stem loop as a guide ( Figure 4C). We found excellent agreement with one cruciform arm and SL1 domain from the NMR structure ( Figure 4C, orange), and were also able to fit the remaining helices from the NMR structure into our envelope ( Figure 4C, red, yellow, purple). Based on our SAXS data, we conclude that the TLE and SL1 are oriented in opposite directions in the monomeric UTR240(ΔDIS). This orientation is too distant for a single WT or S207D LysRS(ΔN65) homodimer ( Figure 4D) to bind both sites without a significant conformational change. Importantly, the SAXS envelope indicates a structure in which SL1 is properly folded, with the DIS exposed in the expected dimer-competent conformation. Therefore, the reduced binding of LysRS(ΔN65) to the UTR240(ΔDIS) relative to the WT UTR240 is not due to misfolding of the RNA. Rather, tighter binding of both LysRS(ΔN65) variants to the UTR240 requires gRNA dimerization. Based on our SAXS data, we conclude that the TLE and SL1 are oriented in opposite directions in the monomeric UTR 240 (∆DIS). This orientation is too distant for a single WT or S207D LysRS(∆N65) homodimer ( Figure 4D) to bind both sites without a significant conformational change. Importantly, the SAXS envelope indicates a structure in which SL1 is properly folded, with the DIS exposed in the expected dimer-competent conformation. Therefore, the reduced binding of LysRS(∆N65) to the UTR 240 (∆DIS) relative to the WT UTR 240 is not due to misfolding of the RNA. Rather, tighter binding of both LysRS(∆N65) variants to the UTR 240 requires gRNA dimerization.

Disruption of TLE Structure by Primer Extension Releases Bound LysRS
Previous work demonstrated that the TLE hairpin is the primary determinant for LysRS(∆N65) binding to gRNA via anticodon loop sequence mimicry and structure mimicry of the canonical tRNA L-shaped fold [18,19,37]. In our proposed model, LysRS facilitates correct primer localization by releasing tRNA Lys3 in close proximity to the PBS due to competition by the TLE for LysRS binding [17,19]. Therefore, because LysRS binding to the TLE precedes primer annealing, we hypothesized that the initiation of reverse transcription will induce conformational changes in the TLE that facilitates the release of LysRS, ensuring that LysRS binding does not significantly inhibit proviral DNA synthesis.
To test this hypothesis and characterize the conformational changes that occur during reverse transcription initiation, binding assays were performed between WT and S207D LysRS(∆N65) variants and PBS/TLE constructs annealed to short DNA oligonucleotides resembling different stages of initial reverse transcription products ( Figure 5A). The annealing of antiPBS 18 and antiPBS 18 +3 should not significantly alter the TLE structure, but annealing of antiPBS 18 +6 and antiPBS 18 +11, with complementary regions that extend into the TLE stem, would be expected to cause gradual unfolding of the TLE hairpin. Reverse transcription pauses were observed at +3 and +5 sites upon primer extension, due to the stability of the TLE stem [43]. As expected, binding of LysRS(∆N65) was relatively unaffected by a 3-nt extended primer, but further extension progressively increased the dissociation constant for both WT and S207D LysRS(∆N65), consistent with destabilization of the complex (Table 2, Figure S7). The +6 extended primer had reduced affinity despite not annealing to any nt that directly crosslink to either LysRS(∆N65) variant (Figure 3). Similarly, the +11 primer only annealed to 2 or 1 nt that crosslinked to WT or S207D LysRS(∆N65), respectively.
Previous work demonstrated that the TLE hairpin is the primary determinant for LysRS(ΔN65) binding to gRNA via anticodon loop sequence mimicry and structure mimicry of the canonical tRNA L-shaped fold [18,19,37]. In our proposed model, LysRS facilitates correct primer localization by releasing tRNA Lys3 in close proximity to the PBS due to competition by the TLE for LysRS binding [17,19]. Therefore, because LysRS binding to the TLE precedes primer annealing, we hypothesized that the initiation of reverse transcription will induce conformational changes in the TLE that facilitates the release of LysRS, ensuring that LysRS binding does not significantly inhibit proviral DNA synthesis.
To test this hypothesis and characterize the conformational changes that occur during reverse transcription initiation, binding assays were performed between WT and S207D LysRS(ΔN65) variants and PBS/TLE constructs annealed to short DNA oligonucleotides resembling different stages of initial reverse transcription products ( Figure 5A). The annealing of antiPBS18 and antiPBS18+3 should not significantly alter the TLE structure, but annealing of antiPBS18+6 and antiPBS18+11, with complementary regions that extend into the TLE stem, would be expected to cause gradual unfolding of the TLE hairpin. Reverse transcription pauses were observed at +3 and +5 sites upon primer extension, due to the stability of the TLE stem [43]. As expected, binding of LysRS(ΔN65) was relatively unaffected by a 3-nt extended primer, but further extension progressively increased the dissociation constant for both WT and S207D LysRS(ΔN65), consistent with destabilization of the complex (Table 2, Figure S7). The +6 extended primer had reduced affinity despite not annealing to any nt that directly crosslink to either LysRS(ΔN65) variant (Figure 3). Similarly, the +11 primer only annealed to 2 or 1 nt that crosslinked to WT or S207D LysRS(ΔN65), respectively.    Figure 5C and drawing a line from the A-bulge to the TLE loop regions of the envelopes. The lines were then compared to reflect the approximate counterclockwise rotation.
We previously proposed [17][18][19] that the overall conformation of the TLE region is likely to play a role in specific LysRS(∆N65) recognition. SAXS was next used to characterize the structural consequences of extended-primer annealing to the PBS/TLE domain. For these experiments, SEC-SAXS was used, wherein primer-annealed PBS/TLE complexes were separated by SEC immediately prior to SAXS analysis [31,33,34,44]. The primer was present in a 1.5× molar excess to ensure that close to 100% of the PBS/TLE was in the annealed state. All data collected for the PBS/TLE and primer annealed complexes lacked any signs of heterogeneity, aggregation or interparticle interactions/repulsions ( Figure S8) [31]. The conformation of the PBS/TLE RNA with antiPBS 18 annealed ( Figure 5B) closely resembled our previously reported structure [19]. SAXS envelopes for antiPBS 18 +3, antiPBS 18 +6 and antiPBS 18 +11 annealed complexes show that the TLE has a progressive counterclockwise rotation of~65 • ,~145 • and~225 • , respectively, with respect to the planar PBS region ( Figures 5C, S9 and Table 2).

Discussion
Retroviruses have limited sequence space to encode all biological requirements for efficient replication. To maximize functionality, host factors are co-opted to facilitate replication. HIV-1 must package a non-aminoacylated tRNA Lys3 primer to initiate reverse transcription and has evolved to selectively package a complex of phosphorylated LysRS, which lacks aminoacylation capability, and its cognate tRNA [15]. Previously, we proposed that competition from the gRNA 5 UTR for LysRS binding facilitates tRNA Lys3 release from LysRS, which interacts with a TLE stem loop directly adjacent to the PBS [17][18][19]37]. S207D LysRS(∆N65) is known to exist primarily as a homodimer with a conformation that is more "open" when compared to WT LysRS [11]. It was unclear whether this structural switch has any effect on the 5 UTR binding properties or the mechanism of LysRS-facilitated primer placement. The similarities in binding constants and crosslinking sites reported here suggest that S207D LysRS(∆N65) retains the characteristic binding properties of WT LysRS(∆N65) (Table 1, Figure 3). Indeed, both LysRS variants have a two-to three-fold preference for binding to 5 UTR constructs that contain the Psi packaging signal with an intact DIS (Table 1). Importantly, based on crosslinking data, neither LysRS variant directly binds to the DIS. We therefore conclude that the competition for LysRS binding that results in tRNA release proximal to the PBS is more efficient on dimeric HIV-1 gRNAs, the isoform that is packaged into progeny virions [45]. This may help to ensure that phosphorylated LysRS is not diverted from the packaged gRNA dimers to the non-packaged monomeric HIV-1 viral RNAs that serve as mRNAs for viral protein synthesis.
SAXS analysis of LysRS bound to PBS/TLE 105 revealed~16 and~39 Å longer envelopes for WT and S207D LysRS-bound complexes, respectively, relative to the RNA alone ( Figure 2). Due to the low-resolution nature of SAXS and the lack of well-defined features in the extra density, it cannot be conclusively determined whether LysRS is binding as a monomer or its more preferred dimer. Attempts to ascertain the stoichiometry of these complexes using native mass spectrometry were unsuccessful due to the aggregation of the complexes in the buffer conditions required for analysis. Nevertheless, a previous study using hydrogen-deuterium exchange mass spectrometry and SAXS reported that both WT and S207D LysRS exist primarily as homodimers in solution [11]. Therefore, it is most likely that both WT and S207D bind to the HIV-1 gRNA as homodimers. Moreover, the larger excess density observed in the S207D LysRS: PBS/TLE 105 complex is likely caused by the "open conformation" that was previously reported for S207D LysRS homodimers [11].
The other major difference observed between WT and S207D LysRS binding to HIV-1 gRNA was an increased flexibility in the PBS loop and SL1 stem upon binding of S207D LysRS, but not WT (Figure 3). While it remains unclear whether this has any effect on HIV-1 replication, we speculate that it may play a role in facilitating primer annealing or reverse transcription initiation. While not necessary in the NL4.3 isolate used in this study,~14% of HIV-1 isolates including the well-studied MAL isolate require substantial conformational rearrangement of the PBS region for formation of the reverse transcription initiation com-plex [46]. While the authors of that study suggested that the HIV-1 nucleocapsid protein facilitates this rearrangement, our results suggest that S207D LysRS may also participate in these conformational changes.
The fact that LysRS binds to both the PBS/TLE and SL1 suggests that these regions of the 5 UTR may be in close proximity in the three-dimensional structure. However, SAXS data revealed that the UTR 240 (∆DIS) RNA construct adopts a cruciform-like structure with the PBS/TLE and SL1 on opposite ends of the structure (Figure 4). Based on the relative size of LysRS ( Figure 4A,B are at the same scale), a single LysRS dimer is not large enough to bind both the PBS/TLE and SL1 without a conformational change in the RNA. Further, the individual stems (PBS/TLE, SL1/SL2, SL3 and U5:AUG) appear to be independently folded and correspond well to those domains from a recently published NMR structure of the core encapsidation signal, which contains the same RNA regions with a truncated PBS/TLE [38]. Although the individual stems fit nicely into the SAXS envelope, the relative orientations of the stems do not match the reported NMR structure. This may be due to conformational differences resulting from inclusion of the PBS/TLE domain, different experimental conditions, or lack of long-range NMR constraints and/or residual dipolar coupling data to obtain orientation data for the helices in the NMR study.
The first secondary structure element that reverse transcriptase encounters during minus-strand strong-stop cDNA synthesis is the TLE stem [47], which represents a potential roadblock if LysRS is tightly bound. Therefore, LysRS must unbind from the TLE during tRNA primer extension for efficient reverse transcription. Our FA data indicate that the affinity of LysRS for the TLE is reduced as a DNA primer is extended into the first 8 nt of the TLE stem (Table 2), likely due to disruption of the tRNA-like conformation of the PBS/TLE domain ( Figure 5). This result supports our proposed mechanism of LysRS-dependent primer placement based on tRNA mimicry of the PBS/TLE [19]. This also suggests that the affinity of the PBS/TLE for LysRS is finely tuned to allow for proper primer placement, but not tight enough to provide a substantial barrier to reverse transcription.
Based on these results, a new working model is proposed (Figure 6). In this model, HIV-1 infection triggers phosphorylation of LysRS at S207, resulting in LysRS release from the MSC in a conformation that is competent for tRNA binding but not for aminoacylation [11,15] (Figure 6, Step 1). The catalytically inactive dimeric pS207-LysRS/tRNA complex is then recruited to sites of viral assembly via interactions with HIV-1 Gag [5,48]. The 5 UTR can adopt various monomeric and dimeric conformations, including a "kissing loop" dimer [49][50][51][52][53][54] (Figure 6, Step 2). The anticodon-like TLE of an HIV-1 gRNA dimer then competes for binding to pS207-LysRS resulting in an increase in dynamics of the gRNA in this region and release of the tRNA primer proximal to the PBS ( Figure 6, Step 3). Crosslinking and dynamic changes are also observed in the SL1 hairpin, but whether a second LysRS dimer binds directly to this region as shown here remains to be confirmed. The tRNA primer is subsequently annealed to the PBS via chaperone activity of the nucleocapsid domain of the HIV-1 Gag polyprotein [55,56] (Figure 6, Step 4). After viral budding and maturation, reverse transcriptase specifically binds the tRNA:gRNA duplex ( Figure 6, Step 5) and initiates the synthesis of minus-strand strong stop proviral DNA from the 3 end of the uncharged tRNA primer (Figure 6, Step 6). During the initial extension of the primer (3-11 nt), the conformation of the TLE changes and its tRNA mimicry is lost, triggering release of pS207-LysRS from the gRNA. Based on this model, we propose that pS207-LysRS initially selects and facilitates tRNA annealing on the kissing loop dimer subpopulation of gRNA conformers. Annealing of the tRNA primer further stabilizes the kissing dimer and mature nucleocapsid protein subsequently promotes the formation of a more stable extended dimer conformation [49].
from the 3′ end of the uncharged tRNA primer (Figure 6, Step 6). During the initial extension of the primer (3-11 nt), the conformation of the TLE changes and its tRNA mimicry is lost, triggering release of pS207-LysRS from the gRNA. Based on this model, we propose that pS207-LysRS initially selects and facilitates tRNA annealing on the kissing loop dimer subpopulation of gRNA conformers. Annealing of the tRNA primer further stabilizes the kissing dimer and mature nucleocapsid protein subsequently promotes the formation of a more stable extended dimer conformation [49]. Supplementary Materials: The following supporting information can be downloaded at: www.mdpi.com/xxx/s1, Table S1: Table of RNA and DNA primer sequences used in this study; Figure S1: Native PAGE analysis of DNA-primer-annealed PBS/TLE complexes; Figure S2: Native PAGE analysis of UTR240 RNAs; Figure S3: Fluorescence anisotropy plots of WT and S207D LysRS(∆N65) binding to HIV-1 RNAs; Figure S4: SAXS processing of LysRS-bound PBS/TLE; Figure

Supplementary Materials:
The following supporting information can be downloaded at: https:// www.mdpi.com/article/10.3390/v14071556/s1, Table S1: Table of RNA and DNA primer sequences used in this study; Figure S1: Native PAGE analysis of DNA-primer-annealed PBS/TLE complexes; Figure S2: Native PAGE analysis of UTR 240 RNAs; Figure S3: Fluorescence anisotropy plots of WT and S207D LysRS(∆N65) binding to HIV-1 RNAs; Figure S4: SAXS processing of LysRS-bound PBS/TLE; Figure S5: Results of XL-SHAPE titration of LysRS constructs binding to UTR 240 RNA; Figure S6: SAXS processing of UTR 240 (∆DIS) and UTR 240 (∆DIS,∆PBS/TLE) constructs; Figure S7: Fluorescence anisotropy plots of WT and S207D LysRS(∆N65) binding to primer-annealed HIV-1 PBS/TLE 105 RNAs; Figure S8: SAXS processing of DNA-primer annealed PBS/TLE; Figure S9 Funding: This work was supported by NIH grants RO1 AI150493 and U54 AI150472 (to K.M.-F.) for binding/XL-SHAPE studies and SAXS studies, respectively. W.A.C. was supported by a Pelotonia Postdoctoral Fellowship at Ohio State. Additional support comes from the National Institute of Health project ALS-ENABLE (P30 GM124169) and a High-End Instrumentation Grant S10OD018483. SEC-SAXS data was collected at the Cornell High Energy Synchrotron Source (CHESS), which is supported by the National Science Foundation and the National Institutes of Health/National Institute of General Medical Sciences under NSF award DMR-1829070 using the Macromolecular Diffraction at CHESS (MacCHESS) facility, which is supported by award GM-124166 from the National Institutes of Health, through its National Institute of General Medical Sciences.
Institutional Review Board Statement: Not applicable.

Informed Consent Statement: Not applicable.
Data Availability Statement: All data collected for this study will be made available upon request.