Habitat Models of Focal Species Can Link Ecology and Decision-Making in Sustainable Forest Management

: A fundamental problem of sustainability is how to reduce the double complexity of ecological and social systems into simple operational terms. We highlight that the conservation concept of focal species (selected species sensitive to a set of anthropogenic threats to their habitat) links multiple issues of ecological sustainability, and their habitat models can provide a practical tool for solving these issues. A review of the literature shows that most spatial modeling of focal species focuses on vertebrates, lacks the aspect of aquatic and soil habitats, and has been slow in the uptake by actual management planning. We elaborate on a deductive modeling approach that first generalizes the main influential dimensions of habitat change (threats), which are then parameterized as habitat quality estimates for focal species. If built on theoretical understanding and properly scaled, the maps produced with such models can cost-effectively describe the dynamics of ecological qualities across forest landscapes, help set conservation priorities, and reflect on management plans and practices. The models also serve as ecological hypotheses on biodiversity and landscape function. We illustrate this approach based on recent additions to the forest reserve network in Estonia, which addressed the insufficient protection of productive forest types. For this purpose, mostly former production forests that may require restoration were set aside. We distinguished seven major habitat dimensions and their representative taxa in these forests and depicted each dimension as a practical stand-scale decision tree of habitat quality. The model outcomes implied that popular stand-structural targets of active forest restoration would recover passively in reasonable time in these areas, while a critically degraded condition (loss of old trees of characteristic species) required management beyond reserve borders. Another hidden issue revealed was that only a few stands of consistently low habitat quality concentrated in the landscape to allow cost-efficient restoration planning. We conclude that useful habitat models for sustainable forest management have to balance single-species realism with stakeholder expectations of meaningful targets and scales. Addressing such social aspects through the focal species concept could accelerate the adoption of biodiversity distribution modeling in forestry.

then encapsulate the biodiversity conservation aim of a landscape. We elaborate this concept in a spatial modeling perspective to demonstrate how it can-mostly through the binding element of 'threatening process'-operationalize multiple issues of ecological sustainability and bridge the interdisciplinary gaps listed above. We retain Lambeck's original term for 'focal species', while acknowledging that it has been loosely used in the literature and must be routinely rechecked against the original definition [56] (pp. [17][18][19][20][21][22].
The paper is organized as follows. We first explain the concept and review the literature on spatial habitat modeling of focal species for SFM. We assess the coverage of the current research in terms of biodiversity and the forestry problems it might address. We then illustrate an approach that focuses on the threatening process, conceptualizing it through major dimensions of habitat change. We list the main merits of such an approach from a practical modeling perspective, including parameterizing the model as habitat quality and quantity estimates for focal species. The latter is a well-established modeling field. Finally, we illustrate our approach based on recent additions to the forest reserve network in Estonia, where the practical question is the time scale and expected spatial pattern of recovery of degraded habitats and allocation of management to enhance this.

Theoretical Background
Simply put, the practical question of environmental management is where to do what to sustain environmental quality. For the SFM principle of maintaining and restoring biodiversity, it translates to locating and managing threats and opportunities for biodiversity on dynamic landscapes [57][58][59]. There are four classes of spatial management decisions involved: stand-scale management for single or multiple goals; landscape design by combining stand-scale goals for landscape functions (including setting aside protected areas); regulating forest benefits and values in time; and managing for uncertainty at multiple scales.
In our view, the strength of Lambeck's [54] concept of focal species is that it integrates these strategic aspects in a way that is understandable to the wider public, thus serving the stakeholder participation principle of SFM [60]. Specifically:  Selecting well-defined sensitive species to represent a full set of threats to biodiversity simplifies practical biodiversity concerns (the representation and goal-setting gaps above). A useful input is the red-listing of species based on the International Union for Conservation of Nature (IUCN) framework, which also considers 'projected declines' based on potential threats and changes in habitat area and quality [61,62].  Managing (avoiding, mitigating, or reversing) each threat to sustain focal species in actual landscapes links the concern with management responses ( Figure 1) and implicitly addresses some uncertainty (e.g., maintaining population 'at the safe side'). A key simplification is that focal species serve simultaneously as biodiversity indicators and management targets (cf. [63]), while such a link is unspecified in other biodiversity schemes for SFM (e.g., [35,64]).  The uncertainty component can be further scrutinized by scanning for future threats that emerge from changes in the environment or production forestry [65,66], and by explicitly incorporating adaptive management and precautionary measures.  Lists of focal species can be suited to environmental, social, and cultural contexts-depending on local species pools, knowledge, tradition to survey particular species groups, and priorities set by legal protection of species or acceptable costs (e.g., [67][68][69]). The opportunity for spatial models in this framework is to predict focal species' distribution or performance in real landscapes subject to expected or designed change. Such spatial predictions are derived from species-habitat relationships, where specific 'threats' refer to limiting factors or population processes of the focal species. Note that, for modeling these links, ecological niches of the species must be understood beyond correlative patterns in current distributions [70]; thus, so-called black-box modeling approaches that fit environmental parameters without understanding their ecological meaning [71] are discouraged. Due to the underlying logic that 'sensitive species illustrate a general threat', the maps derived from properly parameterized spatial models might then help to depict, analyze, and communicate broader 'where' and 'how' of sustaining forest biodiversity in the spatial and temporal scales for which the parameter values are available ( Figure 1). Depending on how closely the species' distributions follow environmental threats in time, such maps may also reveal past or present spatial extent, severity, and reversibility of the threats (e.g., [72][73][74]).
The methods for predictive mapping of species distributions can be divided into correlative (inductive) and mechanistic (deductive) models. The inductive methods, where predictions are derived from statistically linking empirical observations with habitat characteristics, include many algorithms and programming tools available [71]. The algorithms basically differ depending on the species data (presence-only, presence-absence, or finer scales) and shapes of its habitat function. The deductive methods are based on prior insight into the species' requirements, with a wide range of more and less formal approaches, including procedures for systematizing expert knowledge (e.g., [75,76]). For either class of models to enable spatially explicit management guidance, they should be able to depict landscape change (including alternative management scenarios) in terms of the factors that indicate threats. Figure 1. A framework of targets and activities that link basic biodiversity knowledge (left triangle) and sustainable forest management (SFM) (right triangle) through the nexus of focal species habitat modeling. The activities indicated by numbers: 1, Red-listing of threatened species; 2, distinguishing focal species by listing major threats; 3, focal species habitat modeling; 4, habitat conservation; 5, landscape design.
There are several basic caveats in interpreting predicted distributions of focal species directly for broader biodiversity management. First, each species can be limited by multiple factors, and its distribution is affected by stochastic events and population processes [55,77,78]. This implies that both realized and potential (habitat) distributions of species affected by the same threat only overlap partly and to an extent that varies in time. Hence, increasing model prediction accuracy for a specific species-a major technical aim of distribution modeling [71]-can paradoxically reduce the insight obtained from the model about wider biodiversity. Second, uncertainty of most environmental parameters increases when predicting the future, and data quality is usually reduced toward the past as well. This, too, means general problems with predictions, specifically for complex models. The issue is to find simple and robust habitat characteristics that change predictably in time. Third, most sensitive species may be very rare or even extirpated in the degraded landscapes where habitat improvement is most needed; thus, their habitat prediction may not be practical or reliable for the remaining biodiversity [77]. Instead of completely ignoring such species, a possibility is to add species less vulnerable to the same threat to be able to cover a broad range of environmental change.
An alternative to habitat modeling of threatened species is to map threats (hazards) directly. Such 'exposure maps' have been created by remote sensing of whole landscapes (e.g., for fire frequency, deforestation, night-time lights [79,80]) or modeling point observations based on landscape characteristics (for example, poaching threat maps from camera trapping of poached animals [81]). Threat maps, though, are not explicit about likely biodiversity responses, which in turn limits objective-setting and cost-effective spatial analysis of conservation actions [82]. In a structured decision-making process, focal species thus serve as a multi-purpose tool to set the objectives, choose among actions, and to measure the success.

Published Spatial Models of Focal Species Performance
Modern techniques of creating species habitat maps for forest management prescriptions originate from the rapid development of spatial analysis in environmental protection, wildlife ecology, and threatened species research in the 1980s. Notably, the United States (US) Forest Service developed Habitat Evaluation Procedures in the 1970s, which became increasingly formalized, supported by guidelines of use and computer programs [83]. Along with the appearance and acceptance of GIS-techniques and data, such procedures transformed from individual assessment to automated landscape analysis (e.g., [84]). In the high-profile conservation case of the spotted owl (Strix occidentalis), GIS models were linked with population models in real landscapes first in 1992 [85]. In parallel, there was a development from prescribing forestry activities from the perspective of a single subjectively selected species toward comprehensive sets of species to represent different niche dimensions of habitat specialists ( [86,87] or species requiring large areas [88]. In retrospect, these US approaches appear closer to SFM than Lambeck's [54] Australian view that emphasized protection and restoration. The new aspect brought up by the latter was, however, that species should be used to analyze habitat futures, not just to maintain the present values. To characterize the field's development since then, we performed a search of modeling studies that spatially predicted the performance (incidence, trends, or demography) of representative species in real forest landscapes and through time, and in response to threats that could be mitigated by forest management or conservation. We performed initial searches on 8 April 2020, using the Scopus database and two alternative search strings: (i) TITLE-ABS-KEY ("focal species" AND forest) AND TITLE-ABS-KEY (model* OR predict* OR simulat*); (ii) REF ("Lambeck") AND TITLE-ABS-KEY (forest) AND TITLE-ABS-KEY (model* OR predict* OR simulat*). We excluded irrelevant studies by considering the title and, if unclear, by the abstract. Full texts of the remaining 38 studies were then assessed for whether they included a forestry perspective s. lat. (i.e., including also policies, planning of landscapes and set-asides) and met at least three of the following four criteria: A, addressed environmental threats that also affect wider, at least partly known range of forest taxa (note that, for practical purposes, we here restricted the focal species surrogacy assessment to species diversity only); B, included management options or approaches that also affect wider, known species diversity; C, were a part of a legitimate planning process; D, described how the focal taxa were selected based on specific threats and their surrogate value to represent wider species' diversity. If these criteria were supported by references only, we also checked the original publications. Finally, we integrated a series of papers by the same research group in the same study system, and assessed potential gaps in the search string for additional searches on specific topics (metapopulation models; forest water bodies).
Thirteen of the 19 focal-species' modeling studies detected address North American forests (Table 1). Another pattern is that such modeling has remained [89], at least in forestry, largely based on vertebrates. This is despite the problems with cross-taxon congruence being well acknowledged [56]. In fact, many field surveys have addressed potential non-vertebrate surrogate taxa. For example, forest fungal surrogates have been explored in many studies [90], including the matching of selected wood-inhabiting species with threats [91,92]. Specialized lichens appear suitable for guiding multiple management dimensions [93], but spatial models for that remain scarce (Table 1). Modeling for decision-making may have thus contributed to the taxonomic bias in SFM, which is usually attributed to insufficient stakeholder knowledge [94]. A similar gap appears in ecosystem coverage regarding the management of small freshwater bodies, notably headwater streams in forests. Again, there is well-established literature on the indicator value of many aquatic or semi-aquatic taxa, including suggestions to use some invertebrates, fish, amphibians, or birds as broader management targets (e.g., [95][96][97]). Relevant spatial models are, however, rare and tend to focus solely on the species' indicator value (e.g., [98]) or its conservation perspectives (e.g., [99]). Wood bioenergy use scenarios predict habitat gains for shrub-associated species and habitat loss for mature forest species in 40 years; the species negatively affected tend to be threatened by other processes as well. [104] II. Three mature-forest vertebrates in Washington,

US
In 80-year projections, moderate thinnings to accelerate forest growth appear as the best silvicultural strategy that does not reduce the habitat of any species while producing substantial timber revenues (39% of intensive forestry). [105] II. Twenty-seven saproxylic insects, fungi,

lichens in Finland
In a 60-year perspective, a cost-effective strategy to increase habitat quality of production forests is to reduce the area that is conventionally thinned. [106]#

Columbia
In a landscape with production and protected forests, a management strategy that keeps the total area of caribou winter habitat at a stable level through time optimizes the trade-offs between old-growth protection and timber harvest. [107]#

II. Picoides arcticus in
Canadian conifer forests In 100 years, current-level harvesting would much reduce recruitment of this old-growth bird.
Wildfire intensification due to climate change aggravates the decline. Reduced harvesting and promoting conifers mitigate these impacts. [108] II. Seiurus aurocapillus in

Canadian hardwoods
In 80 years, immigration to intensively managed districts retains a sink population of this hardwood specialist at only 25% lower densities than without harvest. Replacing 10%-20% of selection cuttings with shelterwood would add little stress, but climate change would much accelerate reduction. [109] II. Three birds and a beetle specific to forest successional stages in Sweden Extended or shortened rotations affect the species positively or negatively depending on habitat requirements. However, even favorable scenarios can cause temporary reductions in 150 years due to uneven distribution of stand-ages. [110] III. Two passerines with distinct niches in the central U.S.
Restoring forest area (afforestation) supported population increase better than restoring existing forest habitats, but it was effective only when targeted non-randomly to key areas to reduce fragmentation.
[ Based on the species' habitat connectivity mapping and climate-change scenarios, the study maps and prioritizes potential extensions of the current protected area network in the region. [119] V. Martes americana in the Appalachians For this old-forest species, the reduction in logging can mitigate population declines that are expected due to climate change in this vulnerable hotspot region. [120] 1 Main focus of the study: I, mapping forest biodiversity dimensions of landscape change; II, stand-scale effects of intensive timber harvesting in forests; III, metapopulation viability in dynamic woodlands; IV, forest set-asides to protect flagship species; V, biodiversity assessment of forest futures in biodiversity hotspots. 2 *Studies for official programs for biodiversity conservation or mitigating the environmental impact; #studies not captured with the formal search string In our view, most studies listed in Table 1 appear relevant to support decision-making at different levels. This contrasts with an overall scarcity of such studies, of which (judging from the statements in original studies), even fewer were parts of actual decision-making processes. There may be two reasons for such neglect. First, modeling of futures relies on diverse assumptions on the system's behavior, so that the best focal-species 'models' are actually sets of several linked models depicting social, climatic, ecosystem, and population changes. To develop such sets may require expensive study programs, such as the Northwest Forest Plan, Coastal Landscape Analysis and Modeling Study (CLAMS) [121] or the Forest Landscape Disturbance and Succession (LANDIS) model programs in the US [122,123]. Second, there may be broader political inertia in the SFM and forest conservation, which inhibits the practical adoption of new analytical tools for designing futures [124][125][126]. Such inertia is particularly harmful to biodiversity when it suppresses spatial planning under the conditions of increasing timber harvest since spatial solutions are among those few that could mitigate such pressure [127]. Institutional collaboration for mutual understanding of research development might help in both cases (e.g., [125,128]).

Key Issues for Practical Spatial Models of Focal Species
One way to address the apparently under-used potential of focal-species models in SFM is to clarify the technical issues that could be improved to better contribute to decision-making. For that, we list four major issues that follow from our understanding of focal species as integrating many ecological, social, and cultural aspects of SFM. 1. The rationale that focal species serve both as indicators and management goals promotes linking their models strategically with other decision-making tools. The underlying concept of 'threat' instantly makes sense for ecological risk assessment [129], but some harmonization may be required to also link it with specific 'pressures' in DPSIR (drivers-pressures-state-impact-response) and related causal frameworks of biodiversity or environmental management [130][131][132]. For ecosystem analysis, representative sets of focal species can operationalize the issue of ecological integrity [129,133] and help prioritize ecological risks based on irreversible damage. In management, focal species could inspire the development of new forestry approaches if seen as organizational goals subject to the SMART (specific, measurable, attainable, realistic, and time-sensitive) criteria [134] and educational capacity-building. 2. The spatial models are most useful when they collectively map most of the risk dimensions of the environment rather than the performance of individual species. More work is needed on how to define such dimensions, how to analyze their ecological trade-offs and optimize solutions that also consider socio-economic aspects. An established practice, which has the advantage of including future threats and recovery of extirpated taxa, is to start from conceptualizing vulnerable niches in the environment ('ecological profiles') and selecting species representing such niches [100,133,135,136]. An ecological question is the level of generalization for that, with extremes represented by models based on 'theoretical species' (e.g., [72,137,138]) versus complex real-species models to maximize fit with the data [139][140][141]. Based on our experience with broader understandability issues in environmental decision-making (see also [142,143]), we suggest that a middle ground of simplified, limiting-factor based models of real focal species might serve practical goals best. For such generalization, deductive models have advantages over inductive models (e.g., [104,105]), but only in landscapes and ecosystems known well enough. 3. Some basic tensions of SFM suggest that at least the following technical qualities are important in focal-species models. (a) Dynamic modeling over decadal time-scales. Static models are of limited use since the main practical challenge is how to balance short-vs. long-term perspectives. (b) Preferring a full range of focal-species responses [144] over quantitative accuracy within a limited range. If managers prioritize actions (scenarios), an ordinal response scale may suffice (e.g., [75,145] and allow less-studied taxa to be modeled. A useful qualitative framework is to distinguish fundamental-niche, realized-niche, source-sink, and dispersal-limited locations [139]. (c) The aspects of time frame and decision-relevance also apply to input data. It is important to utilize data sources that are maintained for wider purposes, over long periods (including historical data), and are legitimate to stakeholders. Stand-structural and tree-composition variables of national forest surveys are specifically promising [146][147][148], also given the general trend to address SFM criteria and indicators at the operational unit (stand) scale [30]. (d) Uncertainty remains a part of any model, but it can be at least described [75]. Such descriptions can be linked with the precautionary principle and safe minimum standards relevant to SFM and conservation management. Uncertainty can also vary in space; usefully, it may be the smallest in the highest-priority locations [117]. 4. Good maps help to tell a story that matters to people. This recognizes the basic principles of how policy-makers and other stakeholders think and work [149,150]. A dimension worth considering for depicting management scenarios is human activities and personal experiences [151,152], including researcher-stakeholder collaboration in producing the spatial models [153].

The Problem and the Setup
We exemplify the potential contribution of focal-species modeling based on a recent decision in Estonia to include into national reserve network some forest types for which natural areas have been largely lost. The situation that the most productive forests are underrepresented in reserves and ecologically impoverished outside due to intensive use is common in developed countries [154][155][156]. Research has shown that some forest structures can spontaneously recover within a few decades (e.g., [157,158]), but demanding species re-colonize with a delay [159][160][161], and it is unclear whether these processes would benefit from active restoration [72,162,163].
The Estonian case followed from an analysis made in 2002 for the national forestry development plan, which identified forest protection gaps for old-growth biodiversity by site type [164]. A 2016 ministerial review set the remaining gaps as quantitative targets, prioritizing to set aside additional eutrophic (149 km 2 ) and meso-eutrophic (147 km 2 ) forests. It was clear that reasonably large patches of such areas only existed in impoverished states, but emerging research suggested that their protection might still pay off in the long run [165,166]. In 2017-2018, the Ministry of the Environment, the State Forest Management Centre, researchers, and environmental NGOs collectively identified a cost-effective selection of state lands that would cover most of the gap. A total of 286 km 2 (1.2% of Estonian forest land) was set aside as a result, mostly by a single governmental decision in February 2019 (58 new strict reserves; 267 km 2 ; including 25% meso-eutrophic, 36% eutrophic, and 16% eutrophic-paludified types). Here, we use spatial modeling to analyze the reversibility of the most vulnerable and degraded ecological conditions significant for biodiversity. The models will be used as a basis to assess restoration potential in these new reserves.
The reserves comprise 106 distinct patches all over the country, on average 2.7 km 2 (range 0.03-28.5 km 2 ) in size, and with a heavy management footprint. According to historical maps, the area has had >100 km of natural watercourses; ca. 30% remains in its natural streambed, but 56% has been straightened, and 14% is lost due to forestry drainage. Until the mid-20 th century, 8% of the forest area was under some agricultural use (arable land; pastures; wooded grasslands). Most other forests have been converted by production forestry into mosaics of forest stands in various successional stages interspersed by networks of drainage ditches and forest roads. Stands >100 years old, which are the ecosystem targets of strict protection [164], cover only 7% of the area. The rest are recent clearcuts (11%), stands <20 years (28%), 21-60 years (28%), or 61-100 years old (27%). Artificial regeneration has been used on 45% of all forest land, mostly with Norway spruce (Picea abies), but the current share of the planted component varies widely among stands. Besides clearcutting, pre-commercial thinning (9% of forest land), and thinnings and sanitation cuttings (24%) have been used within the last 20 years. Of stands >20 years old, 47% are mixed, 30% conifer, and 23% deciduous forests. The main tree species are P. abies (42%), Betula spp. (25%), Pinus sylvestris (17%), Populus tremula (10%), Alnus incana (2%), and A. glutinosa (2%). Nemoral hardwoods, characteristic of such natural forests (Quercus robur, Tilia cordata, Fraxinus excelsior, Acer platanoides, Ulmus spp.), now only occur at small frequencies.

The Modeling Approach and Inference
We defined major threats as distinct empirically supported habitat dimensions, along which production forestry can reduce natural species pools of eutrophic and meso-eutrophic forests. The expert-based process (including two meetings) involved lead forest biodiversity experts in the country, with knowledge of multiple taxon groups. The forest types under question are well defined by topographic and soil conditions and have diverse species pools [167,168]. In a natural state, these forests have complex uneven-aged or all-aged structure created by gap-dynamics and, depending on moisture, rare stand replacements (mostly due to storm or pathogens) [164,169,170]. This structure is greatly simplified by clearcutting based forestry that uses 30-70-year rotations and a few selected tree-species, notably pioneer deciduous trees and planting of Picea abies over large areas [170][171][172][173]. However, rapid tree growth also accelerates structural recovery after abandoned management or long rotations based on natural regeneration [170,173,174]. Many well-dispersing old-forest species can colonize such forests at longer rotations [92,175], while others remain excluded due to the absence of old-forest structures [93] or (poor dispersers) lack of local refugia [176].
Considering these patterns, we defined seven main 'ecological profiles' of focal specialist species and their management-affected limiting factors in priority order ( Table 2). The factors were then formalized as decision trees and parameterized based on requirements of the focal species and using practical habitat proxies (available in GIS). The output was designed as eleven threat-related habitat quality scores on the ordinal scale, which can be grouped qualitatively from non-habitat to quality habitat (Figure 2). The 'ecological profiles' were (Table 2): D1, a poorly dispersing perennial plant of gap-dynamic eutrophic forest, vulnerable to continuity disruption and dense shade in monoculture stands; D2, a poorly dispersing saproxylic species of natural Picea forests, which is vulnerable to the disrupted continuity of large downed trunks in moderate shade; D3, a rare species inhabiting senescent or dead Populus tremula in mid-succession, which is lost both in intensively managed forests and old-growth without P. tremula recruitment; D4, an epiphyte on old nemoral hardwood trees that are characteristic in natural forests (see above) but suppressed by production forestry; D5, an area-sensitive vertebrate in vertically well-structured stands, vulnerable to structural simplification and patch fragmentation; D6, a terrestrial invertebrate on stable moist ground that suffers from stand-continuity loss and unpalatable litter of forestry-favored conifer and Betula trees; D7, a (semi)-aquatic species of small forest streams, which is threatened by loss of microhabitats due to dredging of stream channel and upstream pollution from agriculture and drainage systems.
We illustrated the mapping approach by predicted changes from 10-years past (2009; based on real data) to current (2019) and 10-years future (2029; predicted by individual variables of the decision trees; Figure 2). We selected these relatively short symmetric time-frames here to assess both the delayed establishing of the reserves (compared to identifying their necessity) and planning and implementing a restoration program (compared to natural succession). Such short time frames also allow us to use a simplified approach to model uncertainty estimation. We ran the decision trees on openly available GIS sources and some critical elements digitalized for this project (notably forest continuity and stream channel changes from historical topographic maps). The basic spatial unit was the forest stand, as defined in the national forest registry. However, since other spatial data divided stands and subsequent forest surveys changed their borders, we performed areal calculations by rasterizing the maps (20 m grid). Certain subjective decisions were made (e.g., we applied the effect of thinning in a 20-year time frame), but the ordinal scale used appeared relatively robust to that. We used QGIS 3.10.2 [177] and R packages, dplyr [178] and sf [179], for the spatial analyses. Table 2. Seven generalized ecological groups of focal-taxa ('ecological profiles'), their focal species, variables for the spatial models, and predicted habitat areas in strict reserves in meso-eutrophic and eutrophic forests in Estonia.  [190][191][192][193] [194,195] [ [196][197][198][199] Note: 1 Variable priority on decision tree (cf. Figure 2): *** distinguishes non-habitat (scores 0-2); ** organizes poor habitats (3-6) or * quality habitats (7-10). Land-use history variables refer to activities carried out in the last 20 years (Thinning) or depicted on topographic maps since 1900 (Continuity of forest use; Draining). 2 Refers to the frequent species: Unsuitable, scores 0-2; High, scores 7-10. Changes in High (HighC) are percentage points relative to the 2019 level. References are for regional justification of the species and the model variables; the process also used unpublished expert knowledge.  We found that (i) although the areas had degraded age and tree-species structure (see above), the reserve selection had been generally successful. Net habitat loss in the last 10 years was only apparent for the perennial plant (D1); it will recover in a decade ( Table 2). (ii) Regarding restoration potential, some popular stand-structural targets of active forest restoration (diversification of stand structure; dead wood creation) [162] were likely to be met at reasonable rates also by protection (Table 2; Figure 3b-d). (iii) In contrast, the pronounced lack of old nemoral hardwood trees for D4 will not be healed (Table 2). Since it cannot be rapidly addressed by restoration, too, another perspective is needed-perhaps protecting residual trees in the surrounding landscapes for the long term [200][201][202]. The same factor has degraded the habitat of litter-dwelling invertebrates (D6), but we expect their habitat quality to recover sooner along with undergrowth development. (iv) Another issue revealed was that even though 10% of the area was currently non-habitat for every focal species defined, we expect considerable passive recovery from that status (Figure 3e). Even fewer of such universally degraded stands appear concentrated enough to allow cost-efficient restoration. (v) The forest area containing quality habitats for lotic invertebrates is very small and, thus, potentially vulnerable to occasional disturbance. To sustain this part of biodiversity, we need a better basic understanding of its functioning in degraded forests and in relation to protection regimes.
Uncertainty of our models contains three major components. First, the priority order of the variables (sequence of decision nodes), which can be assessed by field-checking alternative decision trees. Second, parameter values at decision nodes to be analyzed for sensitivity. Third, parameter accuracy in the GIS sources that can be addressed by combining different sources. To exemplify, we report sensitivity of two models to high-priority nodes of tree age: 'oldest trees >60 yr' in D2 ( Figure  2b) and four classes of 'mean tree age' in D5 (Figure 2d). Model projections for these threshold values changed by ±5 years did not yield abrupt changes in habitat quality distributions (quality habitat areas were not affected at all in D2). Trends were least sensitive: only one projection was affected by >1% percent point. Thus, a +5-yr threshold in D2 predicted a 10% decrease in non-habitat by 2029 instead of a 7% decrease at the original threshold and 6% for the 5-yr threshold.

Discussion
Within 30 years, species distribution and habitat modeling for forest management and conservation have much developed technically, but such models have not become mainstream in actual planning. There are probably several reasons for that, as outlined below. Our broad conclusion, however, is that the biodiversity criterion of SFM (and other land use) cannot be met without simplifying and visualizing the living environment in both ecologically and socially relevant terms. Despite fair criticism against the misuse of the focal species concept [56,77,78,203,204], there are no clear alternatives for making non-human perspectives of the environment and its impacts meaningful for stakeholders and the wider public. Carefully prepared maps integrate many technical and cultural tools for such perspectives, including spatial modeling as a major technique.  Figure 2) and reveal: (b) moderately favorable, but only slowly improving situation for the perennial plant (D1); (c) poor, but rapidly improving, situation for the Picea-inhabiting old-forest fungus (D2); (d) favorable and further improving situation for the old-aspen inhabiting fungus (D3).
A detailed treatment of the problems with the surrogacy value of focal species is beyond the scope of this paper (see [56]), but we note that the concept seems to have suffered from two frequent misconceptions. First, that it is primarily about species [77,78,204] and, second, that the concept prescribes its prevailing practice to highlight vertebrates [205,206]. Although Lambeck [54] provided vertebrate examples, his main idea was to operationalize threats for conservation action systematically. Our case study demonstrated how the diversity of forest taxa can be considered for threat mapping, following from our long-term study of multi-taxon solutions for SFM [207,208]. In analyses on lichenized and wood-inhabiting fungi, we have concluded that focal-species criteria can be met in ca. 2% of the Estonian forest species pool [92,93]. This points at an order of magnitude of a few hundred focal species to be considered for forestry in this country. There is indeed scarce information on most of these species when compared with birds and other vertebrates (and it is likely to remain so), but the question for SFM and conservation is whether the existing information can be organized for the decision-making processes. Specifically, it may not be feasible to monitor all these species in the field, but spatial analysis of their habitats and perspectives using deductive models may be realistic. That, again, does not mean that focal species should be the sole tools to address threats or that they can be used everywhere. For example, useful tools for biologically mega-diverse tropical regions or for indigenous people are probably distinct [209]. However, as a principle, we maintain that non-human species have some integrated and cultural qualities that are not present in the alternatives of measuring physicochemical environments, functional traits in the assemblages, composition, or structure of ecosystems, or their 'services' to humans [38,63,[210][211][212]. Such differences may deepen when it comes to society acting for a change.
Coming to the question of how can spatial analysis help to elaborate and represent meaningful information on selected species in SFM, we identified four key issues for future research and development. Perhaps the crucial one is the research on social value of spatial mapping tools for different decision-making processes. We doubt that focal-species models could contribute effectively to the highly formalized field of spatial economic optimization for multi-purpose forestry planning [23], due to general problems with the 'currency' of biodiversity and measurement error [213,214]. Focal-species models are probably more effective as heuristic tools for political processes, when 'windows of opportunity' shift attention on environmental threats [215]. Our review indicated several enlightening models developed for such policy processes (Table 1), but, in general, there seems to be much unused potential. Noting pronounced problems with uncertainties in biodiversity models [213,216], we emphasize that these analyses make sense in the context of particular decisions. For example, our models initially aimed to locate stands for active restoration for biodiversity, but the results changed the perspective to whether such restoration is feasible overall, and for what purpose. Thus, spatial precision became less an issue compared with field-checking of the qualitative predictions of general habitat availability for different species.
A related issue is a lack of focal-species models on some important ecological dimensions, notably the biodiversity in forest soils and water bodies [217]. We included these dimensions in our model set, although we faced difficulties with obtaining both species' natural-history information and relevant GIS data. A reason for the former is that the environmental impact research in freshwater and soil domains has traditionally focused on assemblages and taxon groups (including functional groups), not individual species [218][219][220]. Ecological analyses might reconsider whether group-level treatment is always justified for management [218,221,222], given that red-listing of species-an important part of the focal-species scheme (Figure 1)-has become an accepted formal tool. Inconspicuous species are gaining official protection in those jurisdictions that prioritize conservation status over public awareness. Similarly, protecting rare and threatened species is required by forest management certification systems, such as by the Forest Stewardship Council (FSC) [223]. Even from an awareness perspective, it is not self-evident that invertebrate species would be ignored by stakeholders. For example, researchers working through media have succeeded in making a long list of 'primeval forest relict beetle' species and their locations attractive for the wider public in Germany [224]. Regarding the GIS data, remote sensing of soil conditions and small water-bodies in biodiversity-relevant terms can probably be better addressed using technological advances already available.
The third issue concerns mapping units and spatial hierarchies, with the basic distinction and different practices of gradient-and patch-based models [225]. We found these approaches complementary and used these in different phases of the analysis. However, it is indeed a caveat of most simple habitat models that they neglect the issues of population structure and viability, although these are primary issues when considering environmental threats to a species. An unanswered question is how much population-specific detail is appropriate to still retain the heuristic value of the model for broad questions.
Finally, we highlight that deductive models based on theoretical understanding are most useful for predicting into the (largely unknown) future. Regarding the present, inductive (empirical) models probably outperform deductive models in spatial prediction, and actual measurements of forest conditions may be even more reliable. This means that ecologists developing decision support for SFM and other land use in human-influenced ecosystems should combine approaches [216]. For modeling, a better understanding of the drivers of future change is necessary. Our review of the literature indicated that studies tend to predict the long-term future by simply extending the current social and economic context and legislature for many decades. Collaboration with social scientists of futures studies might help forest ecologists to understand better how to compile useful spatial long-term scenarios of land use [226,227].