Ubiquitous Integrity via Network Integration and Parallelism—sustaining Pedestrian/bike Urbanism

Nowadays, due to the concern regarding environmental issues, establishing pedestrian/bike friendly urbanism is widely encouraged. To promote safety-assured, mobile communication environments, efficient, reliable maintenance, and information integrity need to be designed, especially in highly possibly interfered places. For busy traffic areas, regular degree-3 dedicated short range communication (DSRC) networks are safety and information featured with availability, reliability, and maintainability in paths of multi-lanes. For sparsely populated areas, probes of wireless sensors are rational, especially if sensor nodes can be organized to enhance security, reliability, and flexibility. Applying alternative network topologies, such as spider-webs, generalized honeycomb tori, and cube-connected cycles, for comparing and analyzing is proposed in DSRC and cellular communications to enhance integrity in communications.


Introduction
Facing issues like energy conservation, the bicycle as a vital monetarily-conscious transportation mode is gaining attention.Travelers, on both business and leisure purposes, can better enjoy tourism-related activities by using bicycles; specifically, bicyclists do not move in a closed room, but, probably along some narrow paths, watch sceneries or historical assets, in a thoroughly relaxed, enjoyed, and even information-realized, yet fully exercised mood.Hence, serving bicyclists well is expected in many cities, including Amsterdam, Atlanta, and other global cities or aerotropolis [1,2], where synergistically incorporated multimodal transportation is essential.

OPEN ACCESS
Issues like bicycles being parked randomly, for example, can harm landscapes and pedestrians.In a multimodal urban transportation environment, especially for high-density places, related resource uses should be well planned.Consequently, bicyclists undertaking both business and leisure traveling, should be well informed and managed.In the last decade, electronic technologies have been advancing at startling rates with faster, more reliable and economical systems.New technological products, for example, can help bicyclists enjoy private amenities through solar powered i-phones.Moreover, the wireless communication infrastructure can help bicyclists get plenty of demanded mobile information for dealing with (nature or business) tasks and enjoying amenities, safely, orderly and in real-time.Hence, the serving level for bicyclists and pedestrians can be the feasible index for evaluating or governing cities in global perspectives.
In other words, to well support quality-assured traffic, and (bicycle/car) parking spaces, with possibilities of mobile business services along paths, interior and exterior, integrity should be seriously concerned.Hence, coordinating bipartite networks, i.e., the spider-web (SW) network, the generalized honeycomb torus (GHT) network, and the hypercube-derived network (CCC, cube-connected cycles), are proposed for establishing integrity assured platforms in dynamical, challenging environments to promote customer satisfaction ubiquitously is intended.

Literature Review
Except for occlusion and material interference, intentional radio intrusions such as those caused by truck drivers' personal privacy devices (PPD) are gaining more attention [3,4].To obtain better telecommunication integrity, using correlated data analysis is rational [5,6].Hence, communication transceivers or sensors allocated and networked in complementary positions are basically prototyped, probably in a modular perspective-just like coordinated sensory mechanisms in two eyes or ears-promoting more diagnosing resilience and intelligence.Furthermore, such dual-surveillance can incorporate with allocation design concerning availability and maintainability in changing environments.
An effective, efficient sequential order for area inspection needs to be pondered, especially if available resources are limited [7].Regarding networking, a Hamiltonian path (cycle) is a path (cycle) linking all nodes once.Such a sequentially ordered feature is essential in communication due to confidential needs in network inspection errands.Wireless communications have peer-to-peer connectivity.Hence, different mathematical performance can be assumed and inspected to help assure network reliability, and analyze the impact of communication interference confidentially.
On the strategy of tracing performance on different networks with the same wireless communication nodes, we show that the performance of mutually independent Hamiltonian paths (MIHP) in both GHT and SW [8] networks can be feasible approaches.Their topology can be adaptable in the dedicated short range communication (DSRC) and the cellular communication networks.Network topologies that have comprehensive information capability can be considered first.
Consequently, hypercube derived networks, e.g., cube-connected-cycle (CCC) graphs [9], which can have similar regular-degree-3 performance, with potentially packaged merits, are schemed to offer more adaptability and mathematical traits including fault-tolerance and Hamiltonian reliability/maintainability.Packaged nodes accommodating CCC or different network topologies may be concerned for maintainability to promote the application of wireless communication in less populated areas, where wireless information and communication is essential; however, they may potentially be significantly and adversely affected due to changing weather and other unexpected conditions.

Mathematical Preliminaries
Communication networks are usually illustrated by graphs, in which nodes represent processors and edges represent links between processors.Let G = (V, E) be a graph if V is a finite set and E is a subset of {(a, b) | (a, b) is an unordered pair of V}.A path is delimited by (x 0 , x 1 , x 2 ,…x n−1 ).A path is called a Hamiltonian path if its nodes are distinct and span V.A cycle is a path of at least three nodes such that the first node is the same as the last node.A cycle is called a Hamiltonian cycle or Hamiltonian if its nodes are distinct except for the first node and the last node, and if they span V [10].
A bipartite graph The number of links connecting a node is called the degree; a network that regularly has fewer degrees is generally economical [11].For DSRC's functionality in busy traffic conditions, regular degree-3 is minimal for supporting availability, reliability, and maintainability in paths of multi-lanes; consequently, networks prototyped for DSRC are regular degree-3 based in this paper.
Assume that m and n are positive integers, where n is even and m ≥ 2. Let d be any integer such that (m − d) is even.The generalized honeycomb torus [12], GHT(m, n, d) is the graph with the node set {(i, j) | 0 ≤ i < m, 0 ≤ j < n} such that (i, j) and (k, l) are adjacent if they satisfy one of the following conditions: (1) i = k and j = l ± 1(mod n); (2) j = l and k = i − 1 if i + j is even; and (3) i = 0, k = m − 1, and l = j + d(mod n) if j is even.
Two Hamiltonian paths , and u i ≠ v i , for every 1 < i < n(G).A set of Hamiltonian paths, {P 1 , P 2 , …, P k }, of G from u to v is mutually independent if any two different Hamiltonian paths are independent from u to v. The mechanism of mutually independent Hamiltonian paths (MIHP) can be applied to parallel processing [18].Such a feature is also considered for secret communications [19,20].
It is proved that SW(m, n) has MIHP performance [8]; and it is believed that GHT(m, n, 0) and GHT(m, n, n/2) can have such performance if nodes are enough (e.g., more than 16).The definition of hypercubes is given as follows.Let u = b n−1 … b i … b 0 be an n-bit binary string.For any j, 0 ≤ j ≤ n − 1, we use (u) j to denote the binary string b n−1 …b j … b 0 .Moreover, we use (u) j to denote the bit b j of u.The Hamming weight of u, denoted by wH(u), is the value of |{0 ≤ i ≤ n − 1|(u) i = 1}|.The n-cube (or hypercube) Q n consists of 2 n nodes and n2 n−1 links.Each node corresponds to an n-bit binary string.Two nodes, u and v, are adjacent if and only if v = (u) j for some j, and we call link (u, (u) j ) j-dimensional.The Hamming distance between u and v, denoted by h(u, v), is defined to be the number of elements in {0 ≤ i ≤ n − 1|(u) i  (v) i }.Hence, two nodes, u and v, are adjacent if and only if The cube-connected-cycles graph CCC n has n2 n nodes, labeled as (l, x), where l is an integer between 0 and n − 1, and x is an n-bit and x is the processor node with an n-bit binary string.Two vertices (l, x) and (l', y) are adjacent if and only if x = y and |l − l'| = 1 or l = l' and y = (x) l .In the latter case, x and y only differ in the position l.The edges that connect (l, x) to its neighbors (l + 1, x) and (l − 1, x) are called cycle-edges.Moreover these cycle-edges form a cycle of length n called a fundamental cycle defined by x (Figure 2), which can represent a node composed of ring networked processors.L(n) is the set offering all possible lengths of cycles in CCC n [9]; for n = 2, CCC n is just the cycle of length 8.The possible-length parameter can be applied for systematic checking and design on affiliated processors.(1,0,0) (0,0,1) (1,0,1) (l,X) X=(0,1,0), l=1 (0,1,0,1) (1,0,0,1) (0,0,1,1) (0,0,0,1) CCC can be viewed as a configuration of 2 n processor nodes, which make up Q n -the hypercube, and a processor has n subnodes formed in a ring.

Module of task demanded nodes
add one node from Q3 . . .add another node add other nodes?
Nodes can be flexibly added, repaired in a ring networked module

Proof Examples (two MIHP on GHT(m, n, n/2) )
GHT(m, n, n/2) can have scalable MIHP performance if its node quantity is reasonable enough.In this paper, an approach is introduced.We can establish basic two MIHP first, and then check their vertical extension and horizontal expansion.Assume (x1, y1) and (x2, y2) are two end nodes of the basic pattern, and they are based on the basic definition of GHT(m, n, n/2).(0, 0) is the left-lowest node's coordinate, but an alternative node number sequence is used to show no collision in two Hamilton path patterns.We then considered scalable vertical extension, as in Figure 3(b), and showed the vertex transitiveness.By the half vertical span nature of the third coordinate of GHT(m, n, n/2), scalable vertical extensions can be configured through the mechanism of continual symmetrical vertical extensions, X-shaped extensions, which do not affect the original nodes' connections.We can find that the vertical extension can have the rhythm, incorporating with the horizontal embeddings, and the rhythm of both patterns will not collide, despite extension increases.It is noted that after the first extension, the compared nodes can get more separation spaces.Besides, the adaptation is applied in Rembeddings, and whether collisions exist can be easily checked.

m Even
The basic Lt. and Rt.Hamiltonian path patterns in a GHT (2,12,6) network can have no collision except for end nodes such as Figure 4.    (24,11) of the Lt. keep leading their compared nodes within 12,23 (11,24) of the Rt.We change the direction of swing expansions (upward ↔ downward) of embeddings.If L-emb.≥ R-emb.01,02 can definitely get more nodes per embedding.It is noted that the swing expansion close to the location of X-ext.needs to be adapted to get more nodes in the highest or lowest extension.
This example of end nodes being adjacent, can have relatively fewer links to start establishing MIHP.Nevertheless, it shows the possibility of scalable MIHP performance in honeycomb tori, HT(m) or GHT(m, 6m, 3m) m ≥ 2.

Network Proposal
Recently, due to the concern about energy conservation, global warming, establishing pedestrian, bike friendly urbanism, tourism has been encouraged by a lot of countries.Depending on rural or urban areas, two approach directions are proposed.One is for occlusion and interference and concerns urban areas; the other is for maintainability and concerns less populated areas.

Along Streets-A Pedestrian/Bike DSRC Proposal
From small settlements to big cities, the traditional cities generally have relatively convenient accessibilities, and enough living resources, and then it can be developed step by step-inherently in a radial-ring configuration, probably including water ways, centered in the original settlement [21].By inherent, real radial-ring motion flow, a grid urban pattern can enlarge its original scope of urban activities.In this perspective, a grid pattern can rationally be adapted to a radial-ring pattern; moreover, the grid can be illustrated to be the radial-ring [21].It is found that bipartite spider-web networks have mathematical laceability (Figure 1 (a)) to sustain the ring performance of connected spider-web networks.
The proposed radial-ring configured DSRC network prototype is integrated via the spider-web network; in other words, it can be a spider-web (radial-ring) network of spider-web (radial-ring) networks.Furthermore, just as cities may be multi-centered, flexible amounts of radial-rings of radial rings can be composed or sub-divided (e.g., in a campus site, a large vehicle architecture); i.e., fractal.Such connected rings can have sequential order [7], fault-tolerance for maintenance, and fractal features for hierarchical management.
In another perspective, historical heritage and other cultural or natural assets are often resources for tourism development.However, such assets may affect flows of spatial development.Apart from adopting underground or overpass construction technologies, such assets can be more economically concerned with, or preserved if the proposed information network prototype can be applied to prevent adversary effects on traffic flows and spatial development-i.e., proposed information networks can be well connected either underground or overpass to help keep traffic moving.
Parallelism along paths is aimed to analyze spatial-tempo interference.Moreover, the system manager may use such parallelism for operating dynamic authentication/authorization in transporting privacy demanded tasks, which can be recorded through active RFID (radio frequency identification) systems.This paper proposes a network in which the sequence of such orderly operation can be both flexibly and logically adjusted in a Hamiltonian way, because the network has scalability and Hamiltonian laceability.
Hence, the aforementioned, highly reliable security-information networks can offer continuous and thoughtful protection for travelers.That is vital in planning future urban infrastructure.Such infrastructure can offer another benefit, specifically regarding bikes' parking, which can be organized in parking spaces, definitely not on the sidewalks, ubiquitously.Moreover, enhancing more flexibility in infrastructure can be considered via networking; parking structures may provide an alternative place for freight distribution and economical synergies [22].

Probe Proposal
In detection of tasked areas, a processor's maintenance needs to be highly concerned.Grouping a set of sensors in a probe can benefit scheduled maintenance errands.For energy saving and fault-tolerance, such wireless sensors in a probe can be linked in a cycle, which is like a row of nodes in the GHT graph.Hence, GHT(m, n, d) can be packaged in m probes (Figures 1 and 2), and each probe has n nodes.Naturally, probes and their inner sensors can be configured in a network model.
The hypercube graph can be one of the most efficient networks for parallel computation.Yet, one drawback is that its degree (number of connections to each node) grows with the size of the network [23].The regular degree-3 CCC network is a hypercube's derivatives.In the CCC network, each probe is considered to have n sensing operations or n subnodes, which can be processed and integrated in a ring independently [24].Each probe is represented as a node of a hypercube, which can be organized in an ad-hoc network of 2 n sup-nodes, or n2 n nodes totally in a planned zone.A probe integrates all its nodes' operation, and then wirelessly transmits information to other probes, and other areas via cellular communication and global positioning systems.

Linking Alternatives
Proposed network prototypes can have different mathematical performances.Hence, a set of nodes can be linked differently to form or reside in different network topologies.Then, such performances can be compared and analyzed to enhance communication integrity and reliability.For example: (1) GHT(m, n, 0) and GHT(m, n, n/2) are different, but in the radio transmission in DSRC, their communication restrictions can be similar (Figures 1(a), 3 and 4).(2) On cellular communication, both SW(6, n) and GHT(m, 6m, 3m) are proposed (Figure 1(c,d)) with MIHP, fault-tolerance performances.(3) Radial-ring, SW networks, have more fault-tolerance than ring networks.The area DSRC network can be configured as an integral SW network.Naturally, radial-ring can be grouped, and even configured as a radial-ring of radial-rings (Figure 1(a)).

Conclusions
The bicycle as a vital energy conscious and tourist's amenity transportation mode is gaining attention.Moreover, establishing pedestrian/bike friendly urbanism is widely encouraged.To promote comfort, safety-assured, mobile communication environments for cyclists, efficient and reliable maintenance and information integrity in communication networks need be considered, especially in highly possible interfered places, including parking garages.
Through dedicated short range communication (DSRC) in busy traffic conditions, regular degree-3 networks with Hamiltonian performances are suggested for supporting availability, reliability, and maintainability in paths of multi-lanes.In sparsely populated areas, applying probes of wireless sensors, such as regular degree-3 GHT and CCC graphs, with security, reliability, and flexibility, is proposed.SW networks having more fault-tolerance than ring networks are suggested as a mechanism to integrate paths' DSRC networks.SW(6, n) and GHT(m, 6m, 3m) with fault-tolerance, MIHP performances are proposed to enhance reliability and integrity in cellular communications.Scalable MIHP is an example that has been proven solvable in the honeycomb torus, which is the prototype for cellular communication network; researchers are still working to prove related cases.MIHP's parallelism can naturally support more independent data for analyzing interference and other spatial-temporal information.Routinely maintained or replaced packaged probes can be accommodated in GHT and CCC graphs.The CCC network can easily be processed in an available hypercube-derived algorithm for parallel computation; its possible-length parameter can be applied for systematic checking and design on affiliated processors.
The network prototypes introduced in this paper are all regular degree-three (in optimal dual-surveillance perspectives); however, different typologies can potentially be applied to the same processing nodes for further analyzing spatial-temporal information.

Figure 1 .
Figure 1.Link adaptability in wide area communication network, (a) urban dedicated short range communication network with Spider-Web networks' integration and fractal connectivity performances; (b) wireless communication quality affected by link adaptability; (c) cellular communication modeled by honeycomb tori, generalized honeycomb torus (GHT) networks; (d) cellular communication modeled by Spider-Web networks.
and E is a subset of {(a, b) | a  A and b  B}; if G-F remains Hamiltonian for any F = {a, b} with a  A and b  B, then G is 1 p -Hamiltonian.A graph G is 1-edge Hamiltonian if G-e is Hamiltonian for any e  E; moreover, if there is a Hamiltonian path between any pair of nodes {c, d} with c  A and d  B, then the bipartite graph G is Hamiltonian laceable.