Lead-Free Halide Perovskite Nanocrystals for Light-Emitting Diodes

Lead-based halide perovskite nanocrystals (PeNCs) have demonstrated remarkable potential for use in light-emitting diodes (LEDs). This is because of their high photoluminescence quantum yield, defect tolerance, tunable emission wavelength, color purity, and high device efficiency. However, the environmental toxicity of Pb has impeded their commercial viability owing to the restriction of hazardous substances directive. Therefore, Pb-free PeNCs have emerged as a promising solution for the development of eco-friendly LEDs. This review article presents a detailed analysis of the various compositions of Pb-free PeNCs, including tin-, bismuth-, antimony-, and copper-based perovskites and double perovskites, focusing on their stability, optoelectronic properties, and device performance in LEDs. Furthermore, we address the challenges encountered in using Pb-free PeNC-LEDs and discuss the prospects and potential of these Pb-free PeNCs as sustainable alternatives to lead-based PeLEDs. In this review, we aim to shed light on the current state of Pb-free PeNC LEDs and highlight their significance in driving the development of eco-friendly LED technologies.

However, the presence of Pb 2+ in LHPs poses significant challenges to their widespread commercialization.Pb 2+ is highly soluble in water, which introduces potential risks to the environment and human health throughout the product life cycle, including disposal.Exposure to Pb can result in various adverse health effects, including neurological disorders, gastrointestinal issues, insomnia, coma, and convulsions.The inherent toxicity of Pb raises concerns regarding its environmental impact and human safety, making LHPs incompatible with the restriction of hazardous substances (RoHS) directive and industrial reliability standards [33][34][35].Therefore, there has been growing interest, and various research efforts have focused on exploring and developing Pb-free PeNCs as promising alternatives to address these intrinsic challenges.
The development of Pb-free perovskites is a crucial alternative strategy for the commercialization of MHP-based devices by substituting Pb cations with nontoxic metal cations, such as tin (Sn), bismuth (Bi), antimony (Sb), or transition metals such as copper (Cu).To achieve this goal, researchers have aimed to eliminate toxicity concerns associated with Pb while achieving comparable or enhanced optoelectronic performance [36][37][38][39][40].
In this review, we provide a comprehensive overview of recent advances in Pb-free PeNCs for LED (PeNC-LED) applications.We discuss the synthetic strategies employed for the development of Pb-free PeNCs, including the selection of nontoxic metal cations and the optimization of crystal structures.Additionally, we examine the optoelectronic properties of Pb-free PeNCs, such as their photoluminescence (PL) characteristics, band structure, and emission mechanism.Moreover, we explore the strategies employed to enhance the stability and operational lifetime of Pb-free PeNC-LEDs and discuss the challenges by addressing key research directions and prospects for the development of Pb-free PeNC-LEDs.

B-Site Metal Candidates for Pb-Free Perovskite Nanocrystals
In the context of traditional LHPs, the general chemical formula can be expressed as ABX 3 , wherein A represents an inorganic monocation such as Cs + , Rb + , or K + and an organic monocation such as the methylammonium cation (MA + ) and the formamidinium cation; B denotes a bivalent Pb 2+ ion; and X represents halide ions such as Cl -, Br -, or I - [41,42].The stability of three-dimensional (3D) ABX 3 perovskite structures can be evaluated using Goldschmidt's tolerance factor t (1) and the octahedral factor µ (2): where r A , r B , and r X correspond to the ionic radii A, B, and X, respectively.Stable perovskite crystal structures are formed when these two factors are in the ranges of 0.8 ≤ t ≤ 1.0 and 0.44 ≤ µ ≤ 0.90 [41,[43][44][45].However, as the ionic radius of the A-site cation increases, which leads to a larger tolerance factor, lower-dimensional perovskite structures are formed [46][47][48].Such dimensions and crystal structure variations result in MHPs having diverse band structures and photophysical and optoelectronic properties, making them promising candidates for various applications.Figure 1 shows the elements in the periodic table denoted by distinct colors (A-site: green, B-site: sky-blue, and X-site: orange), considered potentially viable or having been employed at the A, B, and X positions of the MHPs [49][50][51][52][53][54].Extensive research is being conducted on MHPs with various compositions to progressively enhance their performance across diverse fields.Furthermore, MHPs based on toxic metals, such as Pb and Cd, encounter challenges for commercialization owing to the RoHS directive.Thus, research on Pb-free MHPs is essential for their industrial applications.To substitute non-toxic metals for toxic Pb in LHPs, attention should be paid to the ionic radius and charge neutrality of the substituting metal elements.The selection of elements must satisfy the requirements of an appropriate ionic radius to maintain the structural integrity of the perovskite lattice.Moreover, substitutions should ensure charge neutrality within the crystal structure to maintain overall electrostatic balance [55].By carefully considering these factors, it is possible to identify suitable elements for effective Pb substitution in LHPs.This leads to the development of Pb-free MHPs with the desired properties for optoelectronic device applications, including LEDs.Among the promising elemental candidates, we focus on Sn-, Bi-, Sb-, Cu-based, and double PeNCs and provide an overview of their applications in PeNC-LEDs.

Sn-Based Perovskite Nanocrystals
Sn belongs to group 14 of the periodic table, which is the same group as Pb, and possesses an equivalent valence configuration, resulting in the ability to retain electrical neutrality within the ABX 3 crystal structure (Figure 2a).Moreover, Sn cations have an ideal cubic structure surrounded by an octahedron of anions.These characteristics have led to extensive investigations into Sn as a promising B-site metal replacement for Pb.However, ABX 3 -structured Sn-based perovskites have been observed to spontaneously undergo rapid decolorization and conversion to the A 2 BX 6 formula after exposure to atmospheric conditions, implying a rapid degradation phenomenon [56].Such structural changes adversely affect the chemical and luminescence properties of Sn-based PeNCs (Sn-PeNCs) [57].Therefore, significant efforts have been made in recent years to investigate the structural and luminescent properties of Sn-PeNCs.
Precise control of the precursor ratios over various ranges is crucial for achieving a low density of structural defects within the lattice of the CsSnX 3 NCs [58].This is because the defect formation energy is intricately linked to the chemical potential of each constituent involved in the reaction.Figure 2b shows bright-field transmission electron microscopy (TEM) images of CsSnI 3 NCs with different Cs:Sn ratios.As the Sn content increases, the average size of the cubic CsSnI 3 NCs also increases.For instance, an average size of 26 nm was obtained at a Cs:Sn ratio of 0.25:3 and 37 nm at a ratio of 0.25:4.8.Additionally, byproducts, which are presumed to be unreacted species or reaction intermediates, were observed in CsSnX 3 NCs with a ratio of 0.25:4.8.Furthermore, at the higher Sn ratio of 4.8, large crystals exceeding 200 nm were formed, larger than those at ratios of 3, 3.6, and 4.2.These results indicate that the precursor ratio plays a crucial role in determining the size distribution and purity of CsSnI 3 NCs during synthesis.
By consistently addressing the challenge of preventing the oxidation of Sn(II) to Sn(IV), the performance of Sn-based MHPs has demonstrated consistent improvement.The low stability of CsSnBr 3 NCs can be enhanced by the precise synthesis of CsSnBr 3 cubic nanocages, which uses a simple hot-injection colloidal approach [59].The fabrication of the nanocages can be carefully regulated by selecting suitable precursors, such as MgBr, and adjusting the reaction temperature, resulting in their formation through a self-assembly-driven process.MgBr was used as the bromide source because Mg 2+ has a smaller ionic radius, which, according to tolerance factor theory, prevents its penetration into the perovskite structure.Uncoordinated 1-octadecene (ODE) was chosen as the solvent, and oleic acid (OA) and oleylamine (OAm) were selected as ligands.During this process, injection of the Cs-oleate precursor into the Sn-Br precursor solution resulted in a rapid color change, turning the solution dark red within a few seconds.This color transformation indicates the successful formation of CsSnBr 3 nanocages.
A surface treatment with perfluorooctanoic acid (PFOA) also substantially enhanced the stability of CsSnBr 3 cubic nanocages [59].PFOA exhibits a stronger electron-withdrawing capability than Br − , which passivates the surface of the CsSnBr 3 nanocages.It forms a stronger interaction with Sn 2+ , effectively hindering oxidation.Additionally, PFOA induces steric hindrance, further enhancing the stability of the CsSnBr 3 nanocages.As shown in Figure 2c, the pristine CsSnBr 3 nanocage films show gradual disintegration, with approximately 30% decomposition after 48 h under various desiccation conditions, whereas the PFOA-functionalized CsSnBr 3 nanocage film exhibits a relatively slow decomposition rate of 25% in a moisture-free environment.When the films were exposed to illumination, the pristine CsSnBr 3 films degraded rapidly, with over 95% decomposition within 24 h.Conversely, the PFOA-functionalized CsSnBr 3 film exhibited a slight degradation of approximately 10% under the same conditions.Therefore, water is a critical factor that directly influences the stability of CsSnBr 3 nanocages, and exposure to light accelerates degradation by the decomposition process.
Surface passivation using polymers is another effective strategy for enhancing the stability of Sn-PeNCs [60][61][62].The incorporation of gelatin, an amphoteric polymer obtained as a partial product of collagen hydrolysis, is crucial for providing resistance against water degradation [61].The hygroscopic nature of the gelatin network effectively stabilizes and protects CsSnCl 3 NCs from water-induced damage.Moreover, the high molecular weight of gelatin allows tight coating and isolation of the PeNCs, effectively suppressing self-aggregation and oxidation.
Accordingly, gelatin-coated CsSnI 3 nanocrystals (gel-CsSnI 3 NCs) have been shown to exhibit notably enhanced stability under harsh environmental conditions when compared to pristine OA/OAm-based CsSnI 3 NCs (Figure 2d).The PL intensity of the gel-CsSnI 3 NCs was maintained above 93.28%and 85% for 72 h under dark conditions and UV irradiation, respectively (pink and green lines).By contrast, the water resistance test revealed that the PL stability of pristine CsSnI 3 NCs degraded by over 95% within 5 min.The low stability of pristine CsSnI 3 NCs could originate from the addition of water to the PeNC solution in cyclohexane, resulting in delamination, ligand loss, self-aggregation, PL quenching, and even decomposition.On the contrary, the PL intensity of gel-CsSnI 3 NCs exhibited minimal change after 5 min (Figure 2d, inset) and remained above 75% after 72 h (blue line).
Based on these results, Figure 2e presents a schematic of the proposed interaction mechanism between the gelatin and CsSnCl 3 NCs.The interaction between gelatin and the CsSnCl 3 NCs involves the coordination of the carboxylate and amino groups of gelatin with the Sn atoms in the NCs.Additionally, the protonated amino groups form hydrogen bonds with the Cl atoms.The numerous functional groups in gelatin lead to the occupation of active sites on the NC surface, creating a "rich ligand" state.As a result, comprehensive passivation of the NC surface by gelatin effectively inhibits the formation of surface defects.Therefore, the surface passivation strategy enhances the stability of Sn-PeNCs under atmospheric conditions, highlighting their potential for various applications.Sn-PeNCs have been extensively studied as environmentally friendly Pb-free PeNCs due to their promising characteristics, including the same ns 2 valence electron configuration and similar ion radii (Sn:1.35Å, Pb:1.49Å).They enable the substitution of Pb cations within the ABX 3 structure while maintaining charge neutrality [63].To enhance their structural stability, numerous studies have been conducted on controlling precursor ratios and surface engineering through the introduction of additives such as perfluoroalkyl acids and polymers.However, their practical applications have been limited owing to a lack of research on suitable additives for preventing Sn oxidation.Consequently, current research efforts have focused on enhancing the stability of Sn-PeNCs by exploring additives that can effectively inhibit Sn oxidation.

Bi-Based Perovskite Nanocrystals
The electronic properties of the LHPs can be attributed to the electronic configuration of Pb 2+ , which is characterized as 6s 2 6p 0 .This configuration enables the hybridization of the Pb 6s orbital with the halogen p orbital for valence band formation and of the Pb 6p orbitals with halogen p orbitals for conduction bands.This leads to the observed electronic properties.The presence of shallow defect states in LHPs is closely linked to the strong antibonding interactions that occur between the Pb 6s and halide 5p orbitals within the valence band [64,65].
Bi, which belongs to the same period as Pb, possesses a cationic electron configuration similar to that of Pb 2+ , featuring a [Xe] 4f 14 5d 10 6s 2 electron arrangement.The presence of a 6s 2 lone pair is a distinctive characteristic of Bi that enables it to displace Pb by a heterogeneous substitution mechanism, resulting in the replacement of Pb 2+ with Bi 3+ [66].Moreover, Bi is an eco-friendly alternative to Pb, offering low toxicity and high stability [67][68][69][70].
When Bi replaces Pb in LHPs, maintaining electrical neutrality requires the substitution of three Pb 2+ ions with two Bi 3+ ions, leading to the formation of A 3 B 2 X 9 structures within the ABX 3 framework.Leng et al. first reported the synthesis of MA 3 Bi 2 Br 9 NCs that exhibited an emission wavelength of 430 nm and a maximum PLQY of 12% [71].Subsequently, numerous studies have been conducted on the synthesis of Bi-PeNCs [69][70][71][72][73][74].However, the inconsistent optical properties observed for various colloidal Bi-PeNC synthesis methods indicate the presence of various crystal structures.The combination of Cs + and Bi 3+ cations with halide anions can generate Cs 3 BiX 6 and Cs 3 Bi 2 X 9 (Figure 3a) [75].Cs 3 Bi 2 Br 9 possesses a two-dimensional (2D) layered structure in the P3m1 space group, and one-third of its B-site cation positions are replaced by vacancies.By contrast, dimer structures such as Cs 3 Bi 2 I 9 are formed by Cs + or MA + cations in the face-sharing octahedra and belong to the P6 3 /mmc space group.The bandgap calculated by density functional theory (DFT) using the Vienna ab initio simulation package indicates that the layered structure has a smaller bandgap than the dimer structure, which can be attributed to its smaller lattice constant and volume [76,77].By changing the A-site in Cs 3 Bi 2 I 9 from Cs + to Rb + or K + , the transformation from a dimer to a layered structure can be observed, leading to a transition from an indirect bandgap to a direct bandgap.However, when Rb + or K + cations are used at the A-site of the A 3 Bi 2 I 9 structure, the smaller size of these ions results in a lower-symmetry distorted lattice with the P2 1 /n space group [78].
To investigate the bandgap characteristics associated with the Cs 3 Bi 2 I 9 crystal structure, colloidal Cs 3 BiX 6 and Cs 3 Bi 2 X 9 NCs were synthesized using the hot-injection method and anion exchange with trimethylsilyl halides (TMS-X) [75].The direct synthesis of Cs 3 Bi 2 I 9 leads to the formation of a dimer rather than a layered structure [79][80][81].Because the direct synthesis of layered Cs 3 Bi 2 I 9 is challenging, layered Cs 3 Bi 2 I 9 can be achieved through anion exchange with TMS-I.When comparing the optical properties of dimeric Cs 3 Bi 2 I 9 with those of layered Cs 3 Bi 2 I 9 , it was observed that the first absorption peak in dimeric Cs 3 Bi 2 I 9 appeared at 492 nm, while a similar transition in layered Cs 3 Bi 2 I 9 appeared to be red-shifted to 550 nm (Figure 3b).Layered Cs 3 Bi 2 I 9 exhibits distinctive peaks that differ from dimeric Cs 3 Bi 2 I 9 , although the powder X-ray diffraction (XRD) patterns do not entirely exclude the presence of dimeric structures in the layered phase (Figure 3c).Additionally, band structure calculations using plane-wave DFT revealed that the band gap of the layered structure is lower than that of the dimeric structure.This observation is attributed to the lower conduction band minimum (CBM) in the layered structure compared to that in the dimer structure, resulting in a reduction in the bandgap.The crystal structure of Bi-PeNCs can be influenced by the heating-up process, which is commonly employed for the synthesis of colloidal inorganic quantum dots (QDs).This is because it induces the nucleation, growth, and crystallization of inorganic QDs at high temperatures.The heating-up synthesis method provides relative safety owing to the absence of injection at high temperatures and the controllability of the crystal size by varying the reaction temperature and time, making it potentially advantageous for large-scale production [82][83][84][85][86]. Building on this approach, heating-up synthesis without injection can be used to synthesize cesium bismuth bromide NCs [87].A mixture of CsBr, BiBr 3 , OA, and OAm was stirred in ODE under vacuum, followed by heat treatment, resulting in the synthesis of Cs 3 BiBr 6 or Cs 3 Bi 2 Br 9 NCs.The structure of cesium bismuth bromide NCs can transform from Cs 3 BiBr 6 to Cs 3 Bi 2 Br 9 , depending on the temperature and amount of OA.The PL and PL excitation (PLE) spectra of Cs 3 BiBr 6 and Cs 3 Bi 2 Br 9 are shown in Figure 3d and 3e, respectively.The emission peak of Cs 3 BiBr 6 is observed at 435 nm, whereas that of Cs 3 Bi 2 Br 9 is red-shifted to 461 nm.The absorption spectra corresponded to a bandgap of 3.05 and 2.67 eV, respectively.
Metal-cation doping is an efficient approach for enhancing the optoelectronic properties of PeNCs.Liu et al. synthesized Mn 2+ -doped Cs 3 Bi 2 I 9 NCs to improve these properties [88].In this method, MnI 2 was added to the Bi-oleate solution, and the addition of Mn 2+ ions suppressed and eliminated the formation of CsI impurities arising from the decomposition of the intermediate Cs 3 BiI 6 species during synthesis.Figure 3f shows the absorption and PL spectra as a function of the Mn 2+ doping concentration.Compared with the absorption spectrum of the undoped Cs 3 Bi 2 I 9 NCs, that of Mn 2+ -doped Cs 3 Bi 2 I 9 was red-shifted, accompanied by double peaks at 530-540 and 610-620 nm.This can be attributed to emission from a spin-forbidden 4 T 1 -6 A 1 Mn d-d transition resulting from the transfer of exciton energy from the host Cs 3 Bi 2 I 9 to the Mn 2+ dopants, as commonly observed in Mn 2+ -doped LHP NCs [89][90][91].Additionally, with increasing Mn 2+ concentration from 1 to 5%, the intensity of the PL spectrum increased with a small spectral blue shift from 620 to 610 nm and an improved PLQY from 0.54% (undoped) to 1.57% (5% doped).Figure 3g illustrates the emission mechanism of the Mn 2+ -doped Cs 3 Bi 2 I 9 NCs.When the Mn 2+ -doped Cs 3 Bi 2 I 9 NCs were excited at ~510 nm, energy was transferred from the Cs 3 Bi 2 I 9 host to the Mn 2+ dopants, resulting in emission from the Mn 2+ .Exciton relaxation occurs through three pathways: (i) recombination within the host material assisted by phonons; (ii) non-radiative recombination involving trap sites; and (iii) radiative emission through the Mn d-d transition ( 4 T 1 -6 A 1 ), facilitated by energy transfer to Mn 2+ .Through these exciton relaxation pathways, the Mn 2+ -doped Cs 3 Bi 2 I 9 NCs exhibited two emission peaks attributed to radiative recombination within the Cs 3 Bi 2 I 9 host and Mn 2+ dopants, and an increase in radiative recombination leads to an enhanced PLQY.Despite significant progress in the field of Bi-PeNCs, their PLQY remains generally low [69][70][71][72]75,87,92].This is primarily attributed to residual surface states, strong photonphonon coupling, and dangling bonds present on the PeNC surfaces [93,94].To address this issue, the synthesis of MA 3 Bi 2 (Cl, Br) 9 NCs was proposed through a collaborative ligand-assisted reprecipitation (Co-LARP) method, which leads to an improvement in the PLQY through surface passivation [95].The added Cl anions serve as ligands on the surface of the PeNCs, reducing surface defects and inducing a blue-shifted emission spectrum.Notably, when the Cl/(Cl + Br) ratio reached 33%, the MA 3 Bi 2 (Cl, Br) 9 NCs exhibited a maximum PLQY of 54.1%, and the PL intensity remained at 88% after 12 h under 365 nm UV irradiation.
Bi-PeNCs exhibit various crystal structures depending on their constituent elements.Their optical, photophysical, and electronic properties can be altered using different synthesis methods and doping strategies.Various approaches offer the potential for advancement by tuning and enhancing their optoelectronic characteristics.Although there are no reported cases of Bi-PeNC-based LEDs and their optical properties are inferior to those of LHP NCs, the low cost, non-toxicity, and high stability of Bi suggest that Bi-PeNCs are promising candidates for Pb replacement.

Sb-Based Perovskite Nanocrystals
Cs 3 Sb 2 X 9 (X = Cl, Br, and I), which has a trigonal crystal structure with space group P3m1 (no.164), consists of two [Sb 2 X 9 ] 3− polyhedra within a single unit [96].In the crystal structure of Cs 3 Sb 2 X 9 shown in Figure 4a, two Sb 3+ ions are located on the body diagonal of the unit cell, whereas the eight top corners are occupied by Cs + ions.The connected [Sb 2 X 9 ] 3− polyhedra form a bilayer structure that is stacked together.Cs 3 Sb 2 X 9 has a layered structure and exhibits triangular symmetry.
A simple reprecipitation method did not yield Sb-PeNCs without the assistance of longchain ligands or excessive ligand usage.Cs 3 Sb 2 Br 9 NCs can be synthesized using the ligandassisted reprecipitation (LARP) method.This enables room-temperature PeNC synthesis without traditional heating, an inert gas atmosphere, or injection conditions [97].LARP involves the direct addition of a reaction precursor solution to a vigorously stirred, poor solvent to rapidly achieve a supersaturated state (Figure 4b).To initiate the LARP synthesis process, a clear precursor solution was prepared by dissolving a mixture of SbBr 3 , CsBr, and OAm in a good solvent such as N,N-dimethylformamide (DMF) or dimethylsulfoxide (DMSO).Subsequently, a fixed quantity of the prepared precursor solution was carefully dropped into a vigorously stirred solution of octane and OA, which serves as a poor solvent for the precursors.Supersaturation induces the immediate and efficient recrystallization of Cs 3 Sb 2 Br 9 NCs, leading to their successful synthesis.By utilizing a mixture of octane and OA as ligands, Cs 3 Sb 2 Br 9 NCs with PLQYs of ~20% were synthesized.Moreover, by further optimizing the synthesis conditions of a precursor concentration of 0.033 mM, an octane/OA ratio of 10:1, and a room-temperature reaction, monodispersed Cs 3 Sb 2 Br 9 NCs were obtained with a high PLQY of 46% and a uniform size of 3.07 nm [98].
This doping strategy was proven to be highly effective in enhancing the optical properties of Sb-PeNCs synthesized by the hot injection method.Pristine K 3 SbCl 6 NCs displayed a broad PL spectrum associated with self-trapped excitons (STE) and achieved a moderate PLQY of 22.3% [99].However, through the incorporation of Mn 2+ ions as dopants, the Mn 2+ -doped K 3 SbCl 6 NCs exhibited a remarkable PLQY improvement to 37.2%, attaining white light emission.Furthermore, Mn 2+ -doped K 3 SbCl 6 NCs introduce additional red emission associated with the intrinsic transition ( 4 T 1 − 6 A 1 ) of Mn 2+ ions [100,101].A primary dynamic process for the Mn 2+ -doped K 3 SbCl 6 NCs was proposed (Figure 4c).Initially, upon excitation, the excited charge carriers cause rapid elastic distortions, leading to the formation of STE states owing to strong electron-phonon interactions within the K 3 SbCl 6 host.Simultaneously, an energy transfer process occurs between the Mn 2+ dopant ions and the surrounding STE states, resulting in the excitation of the Mn 2+ dopants.
This excitation leads to an efficient red emission spectrum through the intrinsic transitions ( 4 T 1 − 6 A 1 ) of the Mn 2+ ions, contributing to an observed additional red emission in the Mn 2+ -doped K 3 SbCl 6 NCs.The interplay of these dynamic processes not only enhances the overall PLQY but also induces the versatile luminescent properties of Mn 2+ -doped K 3 SbCl 6 NCs, offering possibilities for optoelectronic applications.The energy transfer process was further validated using excitation spectra obtained by selectively monitoring the energy transfer from the STE at 440 nm and the intrinsic transition of Mn 2+ ions at 600 nm.Both emission spectra exhibited similar broad excitation bands, confirming the occurrence of energy transfer between these two entities.The emission decay was signif-icantly faster when the STE was monitored at 440 nm with increasing concentrations of Mn 2+ .This indicates that the excited energy level ( 4 T 1 − 6 A 1 ) of the Mn 2+ ions primarily originates from the energy transferred from the STE of the K 3 SbCl 6 NCs host.The faster emission decay suggests an efficient energy transfer from the perovskite host to the Mn 2+ ions, confirming the occurrence of energy transfer between them.By controlling the doping concentration of Mn 2+ ions, it was possible to achieve white-light emission with a PLQY of 37.2%.XRD analysis of the 4.2% Mn 2+ -doped K 3 SbCl 6 NCs revealed that the diffraction peaks at approximately 15.1 • , 24.4 • , 29.3 • , 34.0 • , and 46.0 • remained similar to those of the undoped K 3 SbCl 6 NCs (Figure 4d).These diffraction peaks are associated with the zero-dimensional (0D) monoclinic K 3 Sb 2 Cl 6 perovskite structure (PDF#24-0833).Interestingly, the diffraction peaks of the Mn 2+ -doped K 3 SbCl 6 NCs showed minimal changes at Mn 2+ ion doping concentrations of 0.12%, 1.5%, and 3.7%, and a clear red shift in the diffraction peaks was observed when the Mn 2+ ion doping concentration exceeded 4.2%.This observation provides further evidence that Mn 2+ ions were successfully incorporated into the lattice of the 0D K 3 SbCl 6 host.Furthermore, the relative intensity of the STE emission, compared to the intrinsic transition of Mn 2+ ions, decreased progressively as the Mn 2+ ion doping concentration increased from 0.12% to 4.2% (Figure 4e).This decrease signifies the occurrence of energy transfer from the K 3 SbCl 6 host to Mn 2+ .Sb-PeNCs are environmentally friendly B-site substitutes and are capable of forming an A 3 B(III) 2 X 9 structure by the heterovalent replacement of Pb cations.One of the advantages of this structure is the feasibility of low-temperature synthesis and greater thermodynamic stability compared with the 2D perovskite phase.However, the lack of a suitable synthesis method for producing high-quality Sb-PeNCs remains a limitation, leading to poor morphology and hindering their application.A doping strategy shows great potential for solid-state lighting applications but may require different approaches for high-purity displays.

Cu-Based Perovskite Nanocrystals
Transition metals such as Cu have gained considerable attention because of their low toxicity, abundance, excellent stability, and high PLQYs compared to other transition metal-based MHPs [102][103][104].The small ionic radius of Cu, measuring 0.77 nm for Cu + and 0.73 nm for Cu 2+ , prevents it from conforming to a tolerance factor of 1 and maintaining a 3D structure.Therefore, Cu mainly has electronic 0D or 1D structures, which have special optical properties owing to their large exciton binding energies, the A x Cu y X x+y structure in monovalent form, and the A x Cu y X x+2y structure in divalent form [102,105].
In the synthesis of Cu(II)-PeNCs, such as Cs 2 CuX 4 , Cs 2 CuI 4 could not be obtained because pure Cu(II) diiodide is unstable and decomposes easily into iodine and Cu(I) iodide.Cs 2 CuCl 4 exhibited a broad PL spectral range of 400-650 nm, with a PLQY of 51.8%.Therefore, extensive research has focused on Cu (I)-PeNCs owing to the instability and broad emission spectra of Cu(II)-PeNCs [106].
Cu(I)-PeNCs exhibit structural variations depending on the A-site.When Cs is located at the A-site of Cu-PeNC, Cs 3 Cu 2 X 5 and CsCu 2 X 3 structures are observed (Figure 5a) [107].The space groups of the structures were identified from their XRD patterns (Figure 5b) [108].Cs 3 Cu 2 I 5 belongs to the Pnma orthorhombic space group, and its crystal structure consists of [Cu 2 I 5 ] 3− cluster units composed of tetrahedral [CuI 4 ] and trigonal planar [CuI 3 ] units that are separated from the Cs + ions.This arrangement gives rise to an electronic 0D structure [109].CsCu 2 I 3 belongs to the Cmcm space group of orthorhombic crystal systems and exhibits a 1D chain-like structure.This structure is formed by tetrahedral [CuI 4 ] 3− units that share a common edge, connecting them in a linear structure.By contrast, Cu(I)-PeNCs with Rb or K at the A-site follow the A 2 CuX 3 structure, which belongs to the Pnma space group.They exhibit a 1D shape where tetrahedral [CuX 4 ] 3− units share only the common vertex of the halides, resulting in a chain-like structure [110].Overall, Cu(I)-PeNCs exhibit diverse crystal structures, including 0D and 1D forms, depending on the specific combination of the A-site and X-site compositions.
In the excited state, Cu-PeNCs show reorganization owing to the Jahn-Teller distortion that forms STE energy states and induces a Stokes shift, representing the difference between the absorption and emission spectra.In the case of Cs 3 Cu 2 X 5 , the absorption of photon energy converts Cu(I) 3d 10 to Cu(II) 3d 9 , which changes the electronic configuration and induces a Jahn-Teller distortion (Figure 5c) [111].Similarly, the conduction and valence bands of CsCu 2 I 3 are also dispersed along the direction parallel to the tetrahedral [Cu 2 I 6 ] 4− chain, but when it is excited, the electrons are localized due to strong Coulombic coupling and large structural distortion of the [Cu 2 I 6 ] 4− tetrahedron, and the structure is reorganized [112][113][114].When the lattice distortion energy is high, charges are trapped because the trapped state is more stable than the strained state.Therefore, the Jahn-Teller distortion, which forms STE states, effectively confines charges to localized regions.Simultaneously, as STEs are formed, the ground state energy increases owing to the lattice strain energy.Consequently, STE emission exhibits a large Stokes shift [115,116].The emission energy (E em ) from the STE states can be expressed as follows [116]: where E g , E b , E st , and E d represent the bandgap energy, the exciton binding energy, the self-trapping energy, and the lattice strain energy, respectively.The smaller distortion in  By tuning the halogen anions (X = Cl, Br, and I), the emission wavelength of Cs 3 Cu 2 X 5 can be controlled, ranging from the green wavelength region (515 nm, Cs 3 Cu 2 Cl 5 ) to the blue wavelength region (445 nm, Cs 3 Cu 2 I 5 ) (Figure 5f) [111].This spectral tunability of Cs 3 Cu 2 X 5 is attributed to the effect of the halogen size and electronegativity on the electronic structure.During electron excitation, as the halogen radius increases and electronegativity decreases, stronger hybridization between the halogen p-orbital and the Cu 3d orbital is induced [120,121].This enhanced hybridization leads to a decrease in the valence band maximum (VBM) of Cs 3 Cu 2 X 5 .Contrary to the general trend, this decrease in the VBM increases the band gap, leading to a blue shift in the emission wavelength.This phenomenon can be attributed to electronic interactions between the halogen and Cu atoms, which modulate the energy levels and affect the emission properties.
A hot-injection method was used to synthesize 0D Cs 3 Cu 2 X 5 and 1D CsCu 2 X 3 by controlling the reaction temperature [118].In this synthesis method, nucleation was induced within a short time by injecting a Cs-oleate into a Cu-oleate containing OAm and OA ligand molecules as quickly as possible and then cooling the solution.When the temperature of Cu-oleate reached 70 • C and the Cs-oleate solution was rapidly injected, 0D Cs 3 Cu 2 I 5 NCs were synthesized, and when injected at a high temperature of 110 • C, 1D CsCu 2 I 3 was synthesized as the final product.The synthesized Cs 3 Cu 2 I 5 NCs exhibited blue PL at 441 nm and a PLQY of 67%, whereas the 1D CsCu 2 I 3 NCs exhibited yellow PL at 553 nm and a PLQY of ~5%.
Using an anti-solvent precipitation method, 0D Cs 3 Cu 2 X 5 and 1D CsCu 2 X 3 can also be synthesized by adjusting the concentration of the precursor solution and the amount of anti-solvent [122].The CsI and CuI precursors were dissolved in a good solvent, such as DMF or DMSO, and then an anti-solvent such as ethanol was added to precipitate the Cu-PeNC.1D CsCu 2 I 3 can be obtained in a low-concentration precursor solution because Cu + precipitates rapidly when an antisolvent is added to a low-concentration precursor.As the concentration of the precipitated Cu + ions increases, the number of ions participating in the crystallization process increases, and 1D CsCu 2 I 3 is synthesized.By contrast, 0D Cs 3 Cu 2 I 5 can be obtained from a high-concentration precursor solution (0.4 M) without a significant change in the Cs:Cu ratio when an antisolvent is added.The synthesized Cs 3 Cu 2 I 5 NCs exhibited a PL emission peak at 440 nm with a full width at half maximum (FWHM) of 73 nm and a PLQY of 67%, whereas 1D CsCu 2 I 3 exhibited a PL emission peak at 580 nm with a broad FWHM of 125 nm and a low PLQY of 7.4%.
During the hot-injection process, metal halide doping, such as with a ZnI 2 precursor, can lead to a surface passivation effect in Cs 3 Cu 2 X 5 NCs [123].Additionally, Zn cation doping resulted in a tetrahedral coordination arrangement, and Cu + ions were heterosubstituted with Zn 2+ ions.This doping enriched the excited electron density, thereby enhancing the STE emission.Moreover, the incorporation of ZnI 2 results in enriched I anions, which can effectively reduce the number of non-radiative centers caused by the iodine vacancies.Zn-doped Cs 3 Cu 2 I 5 NCs exhibited a blue emission peak at ~440 nm with an FWHM of 73 nm.The PLQY increased from 72.2% for Cs 3 Cu 2 I 5 NCs to 92.8% for the Zn-doped Cs 3 Cu 2 I 5 NCs.
Cu-PeNCs can be synthesized in both the monovalent Cu + and divalent Cu 2+ forms using hot injection and antisolvent precipitation methods.In Cu(I)-PeNCs, lattice distortion arises from the structural characteristics of the PeNCs, resulting in STEs.This phenomenon contributes to a high PLQY and a prolonged PL lifetime resulting from highly localized electrons and holes.Moreover, in contrast to the typical red shift observed during the change in halide composition from Cl to I, the observed blue shift in the emission spectrum can be attributed to structural transformations and significant exciton effects.The emission wavelength and crystal structure can be controlled by adjusting the synthesis conditions, precursor ratios, and halide composition.Additionally, defect passivation can be facilitated through metal halide doping, which enhances the optical properties of the Cu-PeNCs.However, the broad FWHM of the emission spectrum stemming from the presence of STEs remains a major challenge to be solved using a novel approach in materials engineering.

Double Perovskite Nanocrystals
Pb-free double perovskites consist of two different cations occupying the B-sites of an A 2 BB'X 6 structure, providing high flexibility in the selection of B-site cations.The double perovskite structure maintains electrical neutrality by substituting two B 2+ ions with a B + cation and a B 3+ cation, forming an A 2 B(I)B(III)X 6 structure (Figure 6a, left).The B-site can accommodate monovalent cations such as K + , Na + , and Ag + and trivalent cations such as Bi 3+ , In 3+ , and Sb 3+ .Another structural variant is vacancy-ordered double perovskites, where two B 2+ ions are replaced by a single tetravalent cation, such as Sn 4+ or Ti 4+ , and B-site vacancies, forming the A 2 B(IV)X 6 structure (Figure 6a, right).Additionally, a 3Dlayered structure with one vacancy can be achieved when four B 2+ ions are substituted by one B 2+ ion and two B 3+ ions, as represented by vacancy-ordered quadruple perovskites A 4 B(II)B(III) 2 X 12 .The incorporation of one Cu 2+ ion and two Sb 3+ ions in place of four Pb 2+ ions generates a single vacancy, resulting in the formation of a monoclinic layered double perovskite structure such as Cs 4 CuSb 2 Cl 12 (Figure 6b) [124].Thus, the combination of B-site cations and vacancies results in a wide range of structural variations.Double PeNCs have gained significant attention as promising candidates to replace Pb because of their tunable optoelectronic properties; high stability against heat, humidity, and light; and versatility in selecting B-site cations [125][126][127][128].However, their commercial application is hindered by poor PL characteristics, which are attributed to intrinsic and surface defects, indirect bandgaps, and forbidden transitions [129][130][131][132].To address these challenges, various strategies have been explored to improve their optoelectronic properties.
Ag + Bi 3+ -PeNCs exhibit low PLQYs, mainly owing to their indirect bandgap characteristics [126,129,133].The absorption tail observed in the long-wavelength region of the absorption spectrum indicates sub-bandgap absorption [70,132].Yang et al. introduced changes in the indirect bandgap characteristics by doping In 3+ ions in Cs 2 AgBiCl 6 NCs [134].Optical analysis of the Cs 2 AgIn x Bi 1−x Cl 6 NCs revealed blue-shifted absorption peaks with increasing In 3+ doping concentration, and sharp absorption peaks were observed at x values of 0.75 and 0.9, indicating possible direct bandgap characteristics.The intensity of the PL emission peak observed at ~400 nm increased with increasing In 3+ doping concentration, and a second peak appeared at ~570 nm at x > 0.75.
To gain a deeper understanding of the optical mechanism and bandgap characteristics, DFT calculations were performed using the generalized gradient approximation of the Perdew-Burke-Ernzerhof functional.Figure 6c,d depict the band structures of Cs 2 AgIn x Bi 1−x Cl 6 NCs with In ratios of 0% and 75%, respectively.The band structure of Cs 2 AgBiCl 6 NC exhibits an indirect bandgap, whereas that of Cs 2 AgIn 0.75 Bi 0.25 Cl 6 NC shows a nearly direct bandgap.In the Cs 2 AgBiCl 6 NC, the VBM at the Γ point has Cl-p, Ag-d, and Bi-s characteristics, whereas the CBM at L has Bi-p, Cl-p, and Ag-s characteristics.Conversely, in the Cs 2 AgIn 0.75 Bi 0.25 Cl 6 NC, the VBM at the Γ point has Cl-p, Ag-d, and Bi-s characteristics, similar to those of the Cs 2 AgBiCl 6 NC, whereas the CBM comprises In-s, Cl-p, and Ag-s characteristics, similar to those of the Cs 2 AgInCl 6 NC.This indicates the possibility of direct transitions, as observed in the band structure of the Cs 2 AgIn 0.75 Bi 0.25 Cl 6 NC.Similar to Cs 2 AgInCl 6 NC, where a parity-forbidden transition from the VBM to the CBM occurs at the Γ point, Cs 2 AgIn 0.75 Bi 0.25 Cl 6 NC provides a pathway for relaxation through parity-forbidden transitions, leading to emission at approximately 570 nm [135].These results suggest that the dual PL emission peaks can be attributed to the emissions resulting from both band-and parity-forbidden transitions.The PLQYs showed a pronounced enhancement above 0.75 in the doping ratio, resulting in a PLQY of 36.6% in Cs 2 AgIn 0.75 Bi 0.25 Cl 6 NC, but a slight increase below 0.5 in the doping ratio, resulting in a PLQY of ~10% in Cs 2 AgIn 0.5 Bi 0.5 Cl 6 NC.This substantial improvement in the PLQY above 0.75 in the ratio originates from the transition from an indirect bandgap to a direct bandgap (Figure 6e).Band structure diagrams in Figure 6f,g depict the photoinduced charge carrier transportation mechanism and provide an intuitive understanding of the absorption and emission processes based on the indirect and direct bandgap characteristics of the double PeNCs.In the case of an indirect bandgap, both direct and indirect transitions can occur.These indirect bandgap transitions require phonon participation, resulting in a low PLQY [136,137].However, for a direct bandgap, absorption occurs through direct transitions, and the excited carriers can undergo non-radiative relaxation processes to the forbidden states, resulting in two forms of luminescence: direct bandgap relaxation and relaxation to the forbidden states.Radiative relaxation of the band edge and forbidden states improved the PLQY of Cs 2 AgIn x Bi 1−x Cl 6 when x was greater than 0.75.
Cs 2 SnX 6 -based vacancy-ordered double perovskites utilizing Sn 4+ have attracted significant research interest owing to their air and moisture stability, high absorption coefficients, and carrier mobility [138][139][140].Wang et al. reported a synthesis method for Cs 2 SnI 6 perovskites that could be adjusted from spherical NCs, nanorods, nanowires, and nanobelts to nanoplatelets by varying the reaction time during the hot-injection process [141].However, the PLQY of the Cs 2 SnI 6 NCs was found to be as low as 0.48%.Cs 2 SnI 6 NCs can also be synthesized by a ligand-mediated approach using the hot-injection method, similar to conventional LHP NC synthesis [142][143][144].By adjusting the ratio of OA to octylamine, the structure of the Cs 2 SnI 6 NCs could be controlled between the 3D and 2D forms.When only OA was used during the synthesis, 3D Cs 2 SnI 6 NCs were formed, whereas the combination of OA and octylamine resulted in the formation of 2D Cs 2 SnI 6 nanoplatelets.The one-layer 2D Cs 2 SnI 6 exhibited a PL emission peak at 643 nm, while the two-layer 2D Cs 2 SnI 6 displayed a PL emission peak at 742 nm.The PLQYs were measured as 28% for the one-layer Cs 2 SnI 6 and 16% for the two-layer Cs 2 SnI 6 .These results can be attributed to the quantum confinement effect of the quantum-well structure, which enhances the exciton binding energy and improves the PL characteristics [145,146].Similar to the behavior of other PeNCs, doping of metal ions, such as Sb 3+ , in Cs 2 SnCl 6 NCs is an effective strategy for enhancing their luminescent properties [147].Pristine Cs 2 SnCl 6 NCs synthesized by the hot-injection process exhibited a sharp absorption edge at 310 nm with an absorption tail at longer wavelengths (Figure 7a).Under 365 nm excitation, the pristine Cs 2 SnCl 6 NCs showed a PL spectrum peak at 438 nm with a PLQY of 4.37%.Sb 3+ doping of the Cs 2 SnCl 6 NCs was achieved with Sb/Sn precursor ratios of 0.05 and 0.1, where SbCl 3 was mixed concurrently with SnCl 2 .The Sb 3+ -doped Cs 2 SnCl 6 NCs exhibited double PL peaks at 438 and 615 nm, and the PL intensity at 615 nm increased with increasing Sb 3+ concentration from 0.05 to 0.1 (Figure 7b).Further investigations revealed that the 615 nm emission could be attributed to the triplet states of STE induced by Sb 3+ doping.The emission at 615 nm originates from recombination with the ground states through transitions from the singlet states of STE with emission at ~450 nm to the triplet states of STE with emission at 615 nm, resulting in broad emission wavelengths.Through Sb 3+ doping at a ratio of 0.1, the PLQY of Sb 3+ -doped Cs 2 SnCl 6 was enhanced to 8.25% compared to that of pristine Cs 2 SnCl 6 (4.37%).
Vacancy-ordered quadruple perovskite A 4 B(I)B(III) 2 X 12 has attracted significant research interest because of its large compositional space, direct bandgap characteristics, and excellent structural stability [148][149][150][151].It consists of [M(II)X 6 ] 4− octahedra layers sandwiched between [M(III)X 6 ] 3− octahedra layers, crystallizing in the R3m space group symmetry perpendicular to the <111> direction of the cubic perovskite structure.However, their practical applications have been hindered by their poor luminescence properties.Therefore, research has focused on enhancing the luminescent characteristics of vacancyordered quadruple perovskites through metal cation doping [124,[152][153][154][155][156][157].The synthesis of Cs 4 Cd 1−x Mn x Bi 2 Cl 12 NCs was proposed using a hot-injection method with benzoyl chloride [152].The [Mn]/([Mn] + [Cd]) ratios in the final products were quantified as 0%, 1.7%, 10.1%, 34.9%, 69.0%, and 100% using inductively coupled plasma atomic emission spectroscopy.Despite an increase in the Mn ratio, the absorption and PLE spectra showed minimal changes, whereas there was a distinct red shift in the PL emission spectra (Figure 7c).The Cs 4 Cd 1−x Mn x Bi 2 Cl 12 NCs with x = 0.349 exhibit the highest PLQY of 4.6%.However, as the value of x increased further, the PLQY decreased.In Figure 7c, the Stokes shift originated from a difference between absorption and emission peaks.The influences of Stokes shift and self-absorption in PeLEDs have been commonly explained in two ways.First, self-absorption can cause photon loss due to a difference between the numbers of internally generated and externally emitted photons that can be measured as PLQYs [158].However, the large Stokes shift could prevent self-absorption loss because the absorption spectrum does not overlap with the emission wavelength.Therefore, reduced self-absorption resulting from the Stokes shift could enhance emission efficiencies in LEDs.Secondly, however, the Stokes shift could be observed along with the increase in Auger recombination affected by the large exciton binding energy, which can lead to increased efficiency roll-off in LEDs [159][160][161].Therefore, further systematic analysis should be studied to clearly establish the effects of the Stokes shift on LED performance.Similar PL characteristics were observed for Cs 4 Cd 1−x Mn x Bi 2 Cl 12 nanosheets (NS) with the same constituent elements.Bhardwaj et al. synthesized Cs 4 Cd 0.6 Mn 0.4 Bi 2 Cl 12 and 2-to 3-layer-thick 2D NS [157].Optical characterization of pristine Cs 4 CdBi 2 Cl 12 and Cs 4 Cd 0.6 Mn 0.4 Bi 2 Cl 12 NS revealed that a weak PL emission appeared at ~605 nm for the pristine Cs 4 CdBi 2 Cl 12 NS, whereas the Cs 4 Cd 0.6 Mn 0.4 Bi 2 Cl 12 NS showed a gradual increase in the PL emission peak intensity at ~601 nm with increasing Mn doping concentration, unaffected by different excitation wavelengths (Figure 7d).These red-shifted PL spectra due to Mn doping were attributed to an inter-Mn-distance-induced Mn-Mn coupling interaction, leading to a larger d-d splitting of the Mn 2+ ion centers, consequently reducing the gap in the 4 T 1 -6 A 1 electronic transition of Mn 2+ ions [152,162,163].In Cs 4 CdBi 2 Cl 12 , the emission arises from the STE state, whereas the emission in Cs 4 Cd 1−x Mn x Bi 2 Cl 12 arises from energy transfer to Mn 2+ in the STE states [153].Double PeNCs also have limitations in practical applications owing to issues concerning instability due to metal ion oxidation, the formation of deep trap states, and a broad FWHM of the emission spectrum.To overcome these issues, ongoing research aims to enhance the photoelectric performance of double PeNCs through various doping strategies, synthesis methods, and control of variables such as ligands [164][165][166][167][168][169][170][171][172][173][174][175][176][177][178][179][180][181][182].The characterization of changes induced by process variables will lead to diverse applications in various optoelectronic fields.
Based on the above discussion, the optical and photophysical properties of the diverse PeNCs are summarized in Table 1.It is worth noting that certain instances of Pb-free PeNCs exhibit superior PL properties in comparison to LHP NCs.In particular, for remarkable PLQYs of Cu-based PeNCs, it could be necessary to focus on mainly developing device engineering such as device physics, light out-coupling, and charge balance as future promising eco-friendly LEDs.On the other hand, for relatively low PLQYs of Sn-, Bi-, and double PeNCs, research on further developing their intrinsic material properties might be more crucial and would be helpful to further enhance PL properties through promising strategies such as defect passivation, ligand modification, surface engineering, and improved synthesis techniques.

Pb-Free Perovskite Nanocrystal-Based LEDs
Pb-free perovskite LEDs (PeLEDs) exhibit great potential as next-generation LEDs.This is due to their nontoxicity, cost-effectiveness, solution processability, facile emission wavelength tunability, and defect tolerance.Research on colloidal PeNC-based LEDs has recently gained attention in parallel with the rapid advancement of solution-based synthesis of bulk MHPs [183][184][185][186][187][188][189].Optimizing the dimensionality of MHPs provides another avenue for tuning their electronic and optical properties [190][191][192].PeNCs possess distinct electrical and optical properties attributable to their large exciton binding energy, tunable NC size, and reduced dimensionality [19,193].
Most Sn-based MHPs are solution-processed for fabricating LEDs because of their simplicity and low-cost processability.However, the rapid crystallization of Sn-MHPs can lead to poor morphology and low film quality, which degrades the performance of LEDs [194][195][196].To overcome the intrinsic limitations of Sn-based PeLEDs, high-vacuum vapor deposition is an alternative approach for the fabrication of Sn-PeNC films [197,198].The fabrication of PeLEDs based on CsSnBr 3 PeNCs can be achieved by thermal evaporation with in-situ annealing [199].To promote the formation of CsSnBr 3 NCs films, a dual source was used for the thermal evaporation of CsBr and SnBr 2 .Subsequently, in the post-synthetic annealing stage, the initially stacked CsBr and SnBr 2 layers interact at the interface, resulting in the formation of a CsSnBr 3 layer through interdiffusion of the constituent elements facilitated by thermal annealing [183].When testing various postsynthetic annealing temperatures, the CsSnBr 3 films annealed at 85 • C showed a significant enhancement in crystallinity.This is evident from the increased diffraction intensity of the (100) and ( 200) planes and a reduced FWHM.The improved crystallinity can be attributed to an enhanced reaction between the CsBr and SnBr 2 precursors, which occurs as a result of interdiffusion.In addition, the CsSnBr 3 NCs obtained by the annealing-temperature process exhibited an average crystal size of 39.9 nm.The devices were fabricated using the structure of ITO/MoO 3 /4,4 -cyclohexylidenebis[N,N-bis(p-tolyl)aniline]/tris(4carbazoyl-9-ylphenyl)amine (TCTA)/CsSnBr 3 NCs/1,3,5-tri(m-pyrid-3-yl-phenyl)benzene (TmPyPB)/LiF/Al (Figure 8a).The CsSnBr 3 NC-based LED demonstrated a turn-on voltage of 5.5 V (at 1 cd/m 2 ) and a maximum luminance of 43 cd/m 2 at an applied voltage of 10 V. Notably, it achieved a high current efficiency (CE) of 0.34 cd/A and an external quantum efficiency (EQE) of 0.16% (Figure 8b).At an applied voltage from 4.5 to 10 V, the CsSnBr 3 NC-based LED exhibited consistent electroluminescence (EL) emission peaks at approximately 675 nm, indicating exceptional EL stability.Bi-based PeNC LEDs have not been reported yet.This may be caused by the low PLQY resulting from surface defects, which are due to the intrinsic self-trapping-induced phonon-mediated nonradiative process [93,95].It could also be attributed to strong photonphonon coupling and dangling bonds present on the PeNC surfaces [70,93,94].As there are no reports on Bi-based PeNCs LED yet, further research is necessary to improve PLQY and engineering for LED applications.
Sb 3+ , possessing an electronegativity similar to that of Pb 2+ ions, demonstrates exceptional structural stability and outstanding luminescent properties, making it a promising candidate for incorporation as an emitting layer in LEDs.Stable violet-emitting Cs 3 Sb 2 Br 9 NCs, synthesized using the LARP method, exhibited a high PLQY of 51.2% [186].Moreover, the Cs 3 Sb 2 Br 9 NCs exhibited a moderate PL stability change of ~17.5% after 73 h of continuous UV irradiation (365 nm, 30 W).Furthermore, the PL intensity of the Cs 3 Sb 2 Br 9 NCs was maintained at approximately 80% of the initial emission intensity when 0.5 mL of deionized water was added to the Cs 3 Sb 2 Br 9 NC solution for 45 h, while the CsPbBr 3 NCs experienced rapid fluorescence quenching, retaining only ~9% of the initial emission intensity for only 4 h.Moreover, the fabricated PeLED with the structure ITO/ZnO/PEI/Cs 3 Sb 2 Br 9 NCs/TCTA/MoO 3 /Al exhibited a maximum EQE of ~0.206% and luminance of 29.6 cd/m 2 at an operating voltage of 8.0 V (Figure 8c,d).The EL intensity peak was maintained at a wavelength of 408 nm after 6 h of device operation, and the PeLED demonstrated excellent operational EL stability, with only ~10% emission decay.
Cu-based PeLEDs are attracting attention as blue-light emitters owing to their nontoxicity, high stability, and excellent optoelectronic properties.Wang 8e).The device structure illustrates that p-NiO possesses a relatively high ionization potential energy, making it a suitable hole-donating and electron-blocking layer because of its compatible electron affinity with the Cs 3 Cu 2 I 5 NCs [200].Similarly, TPBi served the dual function of electron donation and a hole-blocking layer owing to its low, lowest unoccupied molecular orbital and highest occupied molecular orbital energy levels.Electrons were injected from the upper TPBi layer into the Cs 3 Cu 2 I 5 NC EML, facilitating EL emission through the recombination of confined electrons and holes.
Cs 3 Cu 2 I 5 NC-LED exhibited a Commission International de I'Eclairage (CIE) coordinate of (0.16, 0.07) at 7.0 V, in compliance with the blue coordinate of the National Television Standards Committee (NTSC) standard, reaching ~99% of the NTSC standard and contributing to a wide color gamut for Pb-free PeLEDs.Additionally, the maximum EQE of the Cs 3 Cu 2 I 5 NC-LEDs was ~1.12% (Figure 8f), with high reproducibility and a small relative deviation of 15.7%.Furthermore, Cs 3 Cu 2 I 5 NC-LED demonstrated continuous, relatively stable device operation for 170 h at an applied voltage of 6.7 V while maintaining an EL wavelength of 445 nm.These results indicate the excellent device performance and operational stability of Cs 3 Cu 2 I 5 NC-LEDs.Double PeNCs face challenges in LED implementation, owing to their intrinsic and surface defects, indirect bandgaps, and suppressed emission characteristics [129][130][131][132].However, attempts have been made to improve the optical properties of LED implementation through bandgap modification by metal cation doping and changes in carrier dynamics.Zhang et al. first developed electrically excited white LEDs based on Cs 2 AgIn 0.9 Bi 0.1 Cl 6 NCs without a phosphor [188].Cs 2 AgIn 0.9 Bi 0.1 Cl 6 NCs were synthesized using a hotinjection method with TMS-Cl injection.The Cs 2 AgIn 0.9 Bi 0.1 Cl 6 NCs exhibited two absorption peaks at 333 and 367 nm, a broad dual-color emission from STE emission, and a PLQY of 31.4%.The energy band structure of Cs 2 AgIn 0.9 Bi 0.1 Cl 6 NCs was determined by UPS measurements, revealing a CBM of −7.69 eV and a VBM of −2.98 eV obtained by a Tauc plot.
DFT calculations demonstrated a direct bandgap for Cs 2 AgIn 0.9 Bi 0.1 Cl 6 , and band symmetry analysis indicated that the parity-forbidden transition is broken at the deep-energy level of the conduction band because of the contribution of the Bi atom [135].A device was fabricated with the structure ITO/Poly(9-vinylcarbazole) (PVK)/Cs 2 AgIn 0.9 Bi 0.1 Cl 6 NCs/TPBi/LiF/Al (Figure 8g).The EL emission spectrum remained unchanged with increasing applied voltage, and the turn-on voltage and maximum luminance of 34.7 cd/m 2 were measured at 10 V.The white Cs 2 AgIn 0.9 Bi 0.1 Cl 6 NCs LED exhibited a maximum CE and EQE of 0.058 cd/A and 0.064%, respectively, and emitted white light with CIE chromaticity coordinates (0.32, 0.32) (Figure 8h).

Conclusions
In this review, we presented a comprehensive overview of recent advances in Pbfree PeNCs and their LED applications.PeNCs exhibit size-tunable properties, high PL efficiency, stability, and large exciton binding energy, making them promising candidates for various optoelectronic applications.However, the toxicity of Pb in LHP NCs has limited their commercialization and driven research on Pb-free MHPs.
We systematically reviewed the crystal structure, synthesis methods, efficient strategies for optoelectronic performance, and LED applications of Pb-free PeNCs based on promising B-site metal candidates as substitutes for Pb.We also discussed the synthetic strategies employed in the development of Pb-free NCs involving the optimization of crystal structures that tune their optoelectronic properties, including the PL characteristics and charge-carrier dynamics mechanism.However, the lower performance and stability, along with a broad emission wavelength of Pb-free PeNCs in comparison to LHP NCs, remain a challenge, and LED applications of Pb-free PeNCs are currently limited.These issues present difficulties for their commercialization.
Therefore, further investigations are required to explore strategies aimed at improving the material stability, optoelectronic properties, and device performance of Pb-free PeNCs.Active research and enhancements need to be undertaken with respect to electrical transport capabilities, optical properties, and stability to contribute to the realization and performance enhancement of LEDs.As mentioned earlier, research endeavors aimed at improving these properties necessitate the further development and utilization of techniques such as doping strategy, ligand exchange, and polymer composites (Figure 9).The directions of this material research could be a promising starting point for improving the performance of Pb-free PeNC-based LEDs.Furthermore, as research progresses on performance, stability improvement, and narrow emission spectra, Pb-free PeNCs will demonstrate the huge potential for LED development, offering prospects for a more sustainable and eco-friendly future in the field of display-related industries.

Figure 1 .
Figure 1.Periodic table of the elements that have the potential to constitute perovskite compositions (A-site: green; B-site: sky-blue; and X-site: orange).

Figure 2 .
Figure 2. (a) Crystal structure of CsSnI 3 ; (b) TEM images of CsSnI 3 PeNCs with different ratios of Cs:Sn.Insets indicate histograms of the average particle size of each CsSnI 3 NC; (b) Reprinted with permission from Ref. [58].Copyright, 2021 American Chemical Society.(c) The variation of absorbance over time intensity at 620 nm under various conditions.The temperature and light intensity were 25 • C and 1200 mW/cm 2 for all measurements; (c) Reprinted with permission from Ref. [59].Copyright, 2017 American Chemical Society.(d) Remnant PL values of gelatin-NCs and oleic acid (OA)/oleylamine (OAm)-NCs over time under exposure to air, UV irradiation, and water.(Inset: remnant PL of gelatin-NCs and OA/OAm-NCs in 0.1 h).(e) Schematic image of gelatin coordinate with Sn in CsSnI 3 NCs; (d,e) Reprinted with permission from Ref. [61].Copyright 2020, Elsevier.

Figure 4 .
Figure 4. (a) Crystal structure of Cs 3 Sb 2 X 9 (X = Cl, Br, and I), with a specific view of its xy plane illustrating the spatial distribution of Cs, Sb, and X atoms within the crystal lattice and layered form; (a) reprinted with permission from Ref. [96].Copyright 2022, MDPI.(b) Schematic image of the Cs 3 Sb 2 Br 9 NC precursor reaction system for the ligand-assisted reprecipitation (LARP) technique; (b) reprinted with permission from Ref. [98].Copyright 2017, American Chemical Society.(c) The PL mechanism of Mn 2+ -doped K 3 SbCl 6 NCs; (d) XRD patterns of as-prepared Mn 2+ -doped K 3 SbCl 6 NCs at different doping concentrations; (e) PL spectra of Mn 2+ -doped K 3 SbCl 6 NCs at different doping concentrations under excitation at 365 nm; (c-e) Reprinted with permission from Ref. [99].Copyright 2020, Elsevier.

CsCu 2 I
3 compared to the octahedral distortion in Cs 3 Cu 2 I 5 indicates a smaller bandgap of CsCu 2 I 3 (Figure5d,e)[117].Moreover, the extended PL decay lifetime of the time-resolved photoluminescence (TrPL) in Cs 3 Cu 2 I 5 compared to that in CsCu 2 I 3 can be attributed to two key factors: the augmented exciton binding energy and significant lattice distortion.Cs 3 Cu 2 I 5 exhibits an enhanced exciton binding energy of 224 meV, while CsCu 2 I 3 has a relatively low binding energy of 123 meV.The higher exciton binding energy in Cs 3 Cu 2 I 5 decelerates the exciton decay rate, resulting in an extended PL lifetime[118,119].

Figure 9 .
Figure 9. Illustration of techniques for enhancing the material properties of PeNCs.

Table 1 .
Optical and photophysical properties of PeNCs.