Next Article in Journal
Effect of Internal Microstructure Distribution on Quasi-Static Compression Behavior and Energy Absorption of Hollow Truss Structures
Next Article in Special Issue
Effect of Denture Base Fabrication Technique on Candida albicans Adhesion In Vitro
Previous Article in Journal
Evaluation of Self-Propelled Rotary Tool in the Machining of Hardened Steel Using Finite Element Models
Previous Article in Special Issue
Influence of Vinyl Polysiloxane Impression Techniques on Marginal Fit of Metal Frameworks for Fixed Partial Dentures
Article

The Influence of Residual Alveolar Bone Height on Graft Composition after Maxillary Sinus Augmentation Using Two Different Xenografts: A Histomorphometric Comparative Study

1
Department of Biomedical, Surgical and Dental Sciences, Università degli Studi di Milano, 20123 Milan, Italy
2
Dental Clinic, IRCCS Istituto Ortopedico Galeazzi, 20161 Milano, Italy
3
Department of Oral Surgery, Institute of Dentistry, I. M. Sechenov First Moscow State Medical University, 119146 Moscow, Russia
4
Department of Periodontology & Dental Implantology, School of Dental Medicine, University of Tel Aviv, 6997801 Tel Aviv-Yafo, Israel
5
Department of Periodontics and Oral Medicine, The University of Michigan, School of Dentistry, Ann Arbor, MI 48109, USA
*
Author to whom correspondence should be addressed.
The authors share the last position.
Materials 2020, 13(22), 5093; https://doi.org/10.3390/ma13225093
Received: 22 October 2020 / Revised: 5 November 2020 / Accepted: 9 November 2020 / Published: 11 November 2020
Aim: To evaluate the hypothesis of a correlation between the preoperative residual alveolar bone height (RBH) and graft maturation after maxillary sinus floor augmentation procedures using two different bone substitutes. Methods: A total of 20 patients who underwent unilateral maxillary sinus floor augmentation with either mineralized deproteinized bovine bone (DBBM) or a xenograft enriched with polymer and gelatin (NBS) were included in this prospective study. Six months after sinus surgery, bone biopsies were harvested with a 3.2 mm diameter trephine bur, prior to dental implant placement. Histomorphometric analysis was performed, and the results were correlated with the individual RBH. Implants were loaded after 5 months of insertion, and 1-year implant success and marginal bone level change were assessed. Results: RBH was 2.17 ± 1.11 mm (range 0.5–3.5 mm) and 2.14 ± 0.72 mm (range 0.5–3.0 mm) in the NBS and DBBM group, respectively. The biopsy analyses for the DBBM group showed woven bone increases by 5.08% per 1-mm increment of RBH; medullary spaces decreased by 9.02%, osteoid decreased by 4.4%, residual biomaterial decreased by 0.34%, and lamellar bone increased by 5.68% per 1-mm increase of RBH. In the NBS group, samples showed woven bone increases by 8.08% per 1-mm increase of RBH; medullary spaces decreased by 0.38%; osteoid increased by 1.34%, residual biomaterial decreased by 0.58%, and lamellar bone decreased by 5.50% per 1-mm increase of RBH. There was no statistically significant difference in the correlation between RBH and lamellar bone, woven bone, and osteoid, independently of the material used. Implant success was 100% in both groups, and marginal bone loss was 1.02 ± 0.42 mm in DBBM and 0.95 ± 0.31 mm in the NBS group after the 1-year follow-up. Conclusion: In spite of the absence of significance, the observed trend for woven bone to increase and medullary spaces to decrease when RBH increases deserves attention. Residual bone dimension might be a determinant in the bone graft maturation after maxillary sinus augmentation. View Full-Text
Keywords: histomorphometric analysis; maxillary sinus augmentation; new bone formation; residual bone height; xenograft histomorphometric analysis; maxillary sinus augmentation; new bone formation; residual bone height; xenograft
Show Figures

Figure 1

MDPI and ACS Style

Taschieri, S.; Ofer, M.; Corbella, S.; Testori, T.; Dellavia, C.; Nemcovsky, C.; Canciani, E.; Francetti, L.; Del Fabbro, M.; Tartaglia, G. The Influence of Residual Alveolar Bone Height on Graft Composition after Maxillary Sinus Augmentation Using Two Different Xenografts: A Histomorphometric Comparative Study. Materials 2020, 13, 5093. https://doi.org/10.3390/ma13225093

AMA Style

Taschieri S, Ofer M, Corbella S, Testori T, Dellavia C, Nemcovsky C, Canciani E, Francetti L, Del Fabbro M, Tartaglia G. The Influence of Residual Alveolar Bone Height on Graft Composition after Maxillary Sinus Augmentation Using Two Different Xenografts: A Histomorphometric Comparative Study. Materials. 2020; 13(22):5093. https://doi.org/10.3390/ma13225093

Chicago/Turabian Style

Taschieri, Silvio, Moses Ofer, Stefano Corbella, Tiziano Testori, Claudia Dellavia, Carlos Nemcovsky, Elena Canciani, Luca Francetti, Massimo Del Fabbro, and Gianluca Tartaglia. 2020. "The Influence of Residual Alveolar Bone Height on Graft Composition after Maxillary Sinus Augmentation Using Two Different Xenografts: A Histomorphometric Comparative Study" Materials 13, no. 22: 5093. https://doi.org/10.3390/ma13225093

Find Other Styles
Note that from the first issue of 2016, MDPI journals use article numbers instead of page numbers. See further details here.

Article Access Map by Country/Region

1
Back to TopTop