A Selective Fluorescence Turn-On Probe for the Detection of DCNP (Nerve Agent Tabun Simulant)

Diethylcyanophosphonate (DCNP) is a simulant of Tabun (GA) which is an extremely toxic chemical substance and is used as a chemical warfare (CW) nerve agent. Due to its toxic properties, monitoring methods have been constantly come under the spotlight. What we are proposing within this report is a next-generation fluorescent probe, DMHN1, which allows DCNP to become fully traceable in a sensitive, selective, and responsive manner. This is the first fluorescent turn-on probe within the dipolar naphthalene platform induced by ESIPT (excited state intramolecular proton transfer) suppression that allows us to sense DCNP without any disturbance by other similar G-series chemical weapons. The successful demonstrations of practical applications, such as in vitro analysis, soil analysis, and the development of an on-site real-time prototype sensing kit, encourage further applications in a variety of fields.


Introduction
Nerve agents are a class of organic chemicals that disrupt the central nervous system (CNS) by blocking acetylcholinesterase (AChE), an enzyme that regulates the acetylcholine, a neuro-transmitter [1]. Among them, G-series organophosphonate derivatives [R 1 O(P=O)R 2 OR 3 ] such as Sarin (GB), Soman (GD), and Tabun (GA) showed extreme toxic potency, even at very low concentrations (Figure 1a) [2]. G-series nerve agents are historically notorious when used by military regimes and terrorist organizations. Accordingly, analytical tools that can selectively and sensitively detect these kinds of chemical weapons have been developed for the defense, detoxification, and safe management [3][4][5]. Instrument-based methods, such as mass spectrometry, ion-mobility spectroscopy, and photonic crystals, have been used for the sensing, but these methods have several limitations, such as low sensitivity, limited selectivity, time-consuming process, operational complexity, additional sample pre-treatment steps, and non-portability for real-time on-site application [6][7][8][9][10][11]. In this aspect, fluorogenic and chromogenic molecular sensing systems have gained attention due to their advantages for overcoming the limits of current methods [12][13][14][15]. To date, a few fluorescence probes for the detection of diethylcyanophosphonate (DCNP) have been reported, mostly based on chemical reactions (Figure 1b, Figure S1, Table 1): (i) phosphorylation within the moieties such as alkyl-alcohol, phenolic-alcohol, pyridine, and amine and (ii) conversion of hydroxy-imine functional group to nitrile. Some known probes, however, showed drawbacks including low sensitivity and selectivity, complex including low sensitivity and selectivity, complex sensing conditions, and lack of applications (Table  1). In this study, we disclosed a fluorescence turn-on probe based on excited state intramolecular proton transfer (ESIPT)-suppression for the detection of DCNP that showed high sensitivity and selectivity and potential for practical applications. The design of a new sensing platform for the selective detection of DCNP is very challenging due to the similar reactivity of nerve agent simulants.
Recently, we have focused on the development of naphthalene-based electron donor (D)-bridgeacceptor (A)-type dipolar fluorophore and its applications as molecular probes [13,[16][17][18]. Within this research process, we found a superior sensing ability of 6-(dimethylamino)-3-hydroxy-2naphthaldehyde (DMHN1) toward DCNP (Figure 1c). The ESIPT causes the fluorescence quenching of DMHN1 [19] and the nucleophilic substitution reaction between naphthol and DCNP, which may suppress this pathway. Thus, the reaction would be accompanied by emission enhancements as a turn-on type probe. With the discovery of this unique sensing property of DMHN1 toward DCNP, we systematically analyzed the photophysical properties and demonstrated its applications. Newly developed DMHN1 showed high sensitivity (8.16 ppm) and selectivity (only DCNP), fast-response time (<3 min), and wide practical applicability, such as in real-time monitoring of DCNP in soil samples.  Table 1 for detail structure and information. (c) Sensing mechanism of 6-(dimethylamino)-3-hydroxy-2naphthaldehyde (DMHN1) and DCNP. Schematic illustrations of sensing mode, excited state intramolecular proton transfer (ESIPT) product, merits, and practical applicability. Inset: photos of DMHN1 in the solution before and after treatment with DCNP under UV light (365 nm).

Materials and Methods
The chemical reagents were purchased from Aldrich (St. Louis, MO, USA), TCI (Tokyo, Japan), Alfa Aesar (Ward Hill, USA), and Acros Organics (New Jersey, USA). Species used to perform the screening of nerve agent simulants: DCNP, DCP, DMMP, TPP, TEP, CH3CO2H. An aluminum dish (Hanil, Seoul, Korea) and soils (Sand, Clay and Field; Science Love, Goyang, Korea) were purchased for applications. Commercially accessible reagents and anhydrous solvents were used without further purification. Chemical reactions were carried out under argon atmosphere. Thin-layer  Table 1 for detail structure and information. (c) Sensing mechanism of 6-(dimethylamino)-3-hydroxy-2-naphthaldehyde (DMHN1) and DCNP. Schematic illustrations of sensing mode, excited state intramolecular proton transfer (ESIPT) product, merits, and practical applicability. Inset: photos of DMHN1 in the solution before and after treatment with DCNP under UV light (365 nm).

Materials and Methods
The chemical reagents were purchased from Aldrich (St. Louis, MO, USA), TCI (Tokyo, Japan), Alfa Aesar (Ward Hill, MA, USA), and Acros Organics (Morris Plains, NJ, USA). Species used to perform the screening of nerve agent simulants: DCNP, DCP, DMMP, TPP, TEP, CH 3 CO 2 H. An aluminum dish (Hanil, Seoul, Korea) and soils (Sand, Clay and Field; Science Love, Goyang, Korea) were purchased for applications. Commercially accessible reagents and anhydrous solvents were used without further purification. Chemical reactions were carried out under argon atmosphere. Thin-layer chromatography (TLC) was performed using pre-coated silica gel 60F-254 glass plates (Merck KGaA, Darmstadt, Germany).

Synthesis
DMHN1 was synthesized by following the reported method by our group (see Figure 2) [20]. The directed lithiation and formylation are key steps in this synthesis. 1 H NMR data of synthesized DMHN1 was compared with the reported result. Important points: (i) Slowly and dropwise add t-BuLi (1 drop every 5 s). Fast t-BuLi adding generates the isomer and dimer of formylated products which are difficult to separate in column chromatography. (ii) Fresh t-BuLi and DMF should be used. (iii) Add t-BuLi at a temperature of -20 • C. Caution: t-BuLi is very reactive and fragile. Keep the appropriate PPE (personal protective equipment).

Synthesis
DMHN1 was synthesized by following the reported method by our group (see Figure 2) [20]. The directed lithiation and formylation are key steps in this synthesis. 1 H NMR data of synthesized DMHN1 was compared with the reported result. Important points: (i) Slowly and dropwise add t-BuLi (1 drop every 5 s). Fast t-BuLi adding generates the isomer and dimer of formylated products which are difficult to separate in column chromatography. (ii) Fresh t-BuLi and DMF should be used. (iii) Add t-BuLi at a temperature of -20 °C. Caution: t-BuLi is very reactive and fragile. Keep the appropriate PPE (personal protective equipment).

Sensing Application for DCNP-Moistened Soils
A spoon of each soil (1 g, sand soil, clay soil, and field, respectively; Science Love, Republic of Korea) was transferred to an aluminum dish (Hanil, 52807, China). Two milliliters of DCNP solution (100 mM) in acetonitrile was poured into an aluminum dish under room temperature (25 °C). Soils were incubated for 2 min at 25 °C. After incubation, each soil sample was transferred into 3 mL of DMHN1 solution (10 μM) in CH3CN (1% Et3N). The fluorescence changes of the solution were investigated for 0-120 min by a digital camera (Sony, Alpha A5100, Tokyo, Japan) under UV light (365 nm). The relative fluorescence intensity and standard deviation were calculated by Image-J software (NIH, Bethesda, USA) in the specific fluorescence signal region.

Conclusions
In conclusion, we developed a selective fluorescence turn-on probe, DMHN1, that allows the tracing of DCNP, a simulant of GA nerve gas. As a next-generation fluorescence probe, DMHN1 showed superior sensing ability of DCNP with high selectivity and sensitivity (8.16 ppm) and fast response time (<3 min), and it can be used in a real-time on-site situation. The sensing application of DMHN1 in the DCNP-moistened soils and the development of a proto-type sensing kit proved its potential for further studies. Within this study, the first new sensing approach was disclosed; fluorescent turn-on by reaction-based suppression of ESIPT fluorescence quenching in the intramolecular H-bonding containing D-A-type fluorophore. The fast and selective sensing abilities of DMHN1 encourage further applications in basic science as well as at war zone and crime scenes.

Conclusions
In conclusion, we developed a selective fluorescence turn-on probe, DMHN1, that allows the tracing of DCNP, a simulant of GA nerve gas. As a next-generation fluorescence probe, DMHN1 showed superior sensing ability of DCNP with high selectivity and sensitivity (8.16 ppm) and fast response time (<3 min), and it can be used in a real-time on-site situation. The sensing application of DMHN1 in the DCNP-moistened soils and the development of a proto-type sensing kit proved its potential for further studies. Within this study, the first new sensing approach was disclosed; fluorescent turn-on by reaction-based suppression of ESIPT fluorescence quenching in the intramolecular H-bonding containing D-A-type fluorophore. The fast and selective sensing abilities of DMHN1 encourage further applications in basic science as well as at war zone and crime scenes.

Conclusions
In conclusion, we developed a selective fluorescence turn-on probe, DMHN1, that allows the tracing of DCNP, a simulant of GA nerve gas. As a next-generation fluorescence probe, DMHN1 showed superior sensing ability of DCNP with high selectivity and sensitivity (8.16 ppm) and fast response time (<3 min), and it can be used in a real-time on-site situation. The sensing application of DMHN1 in the DCNP-moistened soils and the development of a proto-type sensing kit proved its potential for further studies. Within this study, the first new sensing approach was disclosed; fluorescent turn-on by reaction-based suppression of ESIPT fluorescence quenching in the intramolecular H-bonding containing D-A-type fluorophore. The fast and selective sensing abilities of DMHN1 encourage further applications in basic science as well as at war zone and crime scenes.

Sensing Application for DCNP-Moistened Soils
A spoon of each soil (1 g, sand soil, clay soil, and field, respectively; Science Love, Republic of Korea) was transferred to an aluminum dish (Hanil, 52807, China). Two milliliters of DCNP solution (100 mM) in acetonitrile was poured into an aluminum dish under room temperature (25 • C). Soils were incubated for 2 min at 25 • C. After incubation, each soil sample was transferred into 3 mL of DMHN1 solution (10 µM) in CH 3 CN (1% Et 3 N). The fluorescence changes of the solution were investigated for 0-120 min by a digital camera (Sony, Alpha A5100, Tokyo, Japan) under UV light (365 nm). The relative fluorescence intensity and standard deviation were calculated by Image-J software (NIH, Bethesda, Rockville, MD, USA) in the specific fluorescence signal region.

Sensing Kit Application
DMHN1 solution (10 µM, CH 3 CN (1% Et 3 N), 1 mL) was placed in a screw-cap HPLC vial (2 mL size, YL Science, YL-VO1236, Guri, Korea) as a prototype sensing kit. A drop of the original DCNP solution was collected and transferred to the vial by using a capillary tube (Marienfeld, Non-heparinized, Lauda-Königshofen, Germany). The fluorescence changes of the kit were monitored for~40 s with a digital camera (Sony, Alpha A5100, Tokyo, Japan) under UV light (365 nm). The relative intensity and standard deviation were calculated by Image-J software (NIH, Bethesda, Rockville, MD, USA) in the fluorescence signal region from video.

Sensing Ability of DMHN1 for DCNP
A solution of DMHN1 in sensing media (acetonitrile, 1% Et 3 N; activator of naphthol moiety) exhibited weak fluorescence due to the ESIPT quenching. However, after being treated with DCNP, it showed significant fluorescence enhancement at an emission maximum of 485 nm (Figure 3a) upon excitation at 388 nm. In the screening of sensing media, acetonitrile gave the best response: (i) negligible fluorescence of DMHN1 itself by ESIPT effect, (ii) significant fluorescence recovery (>20-fold) after reaction with DCNP ( Figures S2, S3 and Table S1). In the pH screening (pH 4, 5, 6, 7, 7.4, 8, 9), DMHN1 showed sensing ability in basic pHs (pH 8,9), but the signal was not high enough to detect it, compared with the acetonitrile condition ( Figure S4). The reasons of these results seem to be (i) activation of naphthol moiety at basic pHs via deprotonation and (ii) decomposition of reactive DCNP in aqueous media. The computational calculation data clearly show the intramolecular H-bonding between the aldehyde and ortho-hydroxyl group in the most stable conformational structure of DMHN1 ( Figure S5). The HOMO-LUMO energy differences, 338.11 nm (∆E = 3.67 eV, condition: vacuum), represent the absorption of DMHN1 in the short wavelength region, and they are corresponding to the experimental results of UV/Vis absorbance; absorption maximum around 350-400 nm (Table S1, condition: within various solvents).
A good linear relationship between the fluorescence intensity of DMHN1 and DCNP concentration was observed in both high (0-1 mM, Figure 3b, Figure S6) and low concentration ranges (0-10 µM, Figure 3c), and it displayed a high sensitivity; detection limited to 8.16 ppm based on a S/N (signal-to-noise) criteria ratio of more than 3. This value is comparable with the known organophosphorus probes (Table 1). Within the time-course study, we monitored a significant fluorescence enhancement of DMHN1 with addition of DCNP within 3 min, and it appeared to show further saturation over 20 min (Figure 3d, Figure S7).
The selectivity of DMHN1 toward DCNP with structurally similar nerve gases including DCP (diethyl chlorophosphate), DMMP (dimethyl methylphosphonate), TPP (tripropyl phosphate), TEP (triethyl phosphate), and acid (acetic acid in this study) was then evaluated (Figure 3e, Figure S8). The nitrile (-CN) leaving group containing DCNP only induced fluorescence enhancement of DMHN1, and most of the other simulants showed no change despite the possibility of a SN 2 type reaction. This superior selectivity is one of the advantages compare with known DCNP probes. To understand the selectivity and sensing mechanism, we analyzed the product using a high-resolution mass spectrometry (HR-mass) and 31 P NMR. What we mainly observed was the only phosphorylation production (m/z = 351.1236, calc. = 351.1236, Figure 3f) ( 31 P-NMR in Figure S9), and this result represents that intramolecular H-bonding containing naphthol moiety in DMHN1 has limited nucleophilicity to attack the electrophilic phosphorous center, in the case of a more reactive cyanide anion bonded DCNP, in comparison to other simulants.

Sensing Application of DMHN1 for DCNP-Moistened Soils
Given that DMHN1 is highly selective and sensitive towards DCNP, we demonstrated the practical applicability of DMHN1. For the first demonstration, we used DMHN1 within various soil samples (sand, clay, and field) for the detection of DCNP, because chemical warfare nerve gas is usually sprayed on the field during wartime or a terrorist attack. The protocol: step 1, put 1 g of each soil (sand, clay, and field, respectively) into an aluminum dish; step 2, treat the DCNP solution (100 mM in CH3CN); step 3, pour DCNP-pretreated soils (1 g) into the solution of DMHN1 (10 μM, 3 mL in CH3CN, 1% TEA); and step 4, monitor fluorescence changes at the ambient temperature (25 °C) (Figure 4a,b). Within a few seconds, a significant fluorescence emission was observed in all soil samples under UV light (365 nm) (Figure 4c, Figure S10), and the signal response became saturated within 60 min (Figure 4d-f). The sand soil showed dramatic changes within a few seconds, and the others showed sufficient responses within 10 min. In the concentration-dependent sensing assay of DCNP in the soil samples, DMHN1 (10 μM) represented the detection limits as 3.125 mM for sand soil and 6.25 mM for the other soils ( Figure S11). These differences were derived from the character of soils; surface area, particle size, dispersity, and a light scattering in the given solvent. These practical application results provide that the DMHN1 can be applied in the detection of DCNP in environmental samples, particularly within soils.

Sensing Application of DMHN1 for DCNP-Moistened Soils
Given that DMHN1 is highly selective and sensitive towards DCNP, we demonstrated the practical applicability of DMHN1. For the first demonstration, we used DMHN1 within various soil samples (sand, clay, and field) for the detection of DCNP, because chemical warfare nerve gas is usually sprayed on the field during wartime or a terrorist attack. The protocol: step 1, put 1 g of each soil (sand, clay, and field, respectively) into an aluminum dish; step 2, treat the DCNP solution (100 mM in CH 3 CN); step 3, pour DCNP-pretreated soils (1 g) into the solution of DMHN1 (10 µM, 3 mL in CH 3 CN, 1% TEA); and step 4, monitor fluorescence changes at the ambient temperature (25 • C) (Figure 4a,b). Within a few seconds, a significant fluorescence emission was observed in all soil samples under UV light (365 nm) (Figure 4c, Figure S10), and the signal response became saturated within 60 min (Figure 4d-f). The sand soil showed dramatic changes within a few seconds, and the others showed sufficient responses within 10 min. In the concentration-dependent sensing assay of DCNP in the soil samples, DMHN1 (10 µM) represented the detection limits as 3.125 mM for sand soil and 6.25 mM for the other soils ( Figure S11). These differences were derived from the character of soils; surface area, particle size, dispersity, and a light scattering in the given solvent. These practical application results provide that the DMHN1 can be applied in the detection of DCNP in environmental samples, particularly within soils.

Sensing Kit Test for Real-Time Detection of DCNP
To utilize the potential of DMHN1, we prepared a prototype DCNP sensing kit for real-time onsite application. Prior to the kit development, a high photostability of DMHN1 was verified under strong light irradiation (365 nm, 3 W, 1 h) ( Figure S12). The components of the DCNP sensing kit were: (i) DMHN1 solution (10 μM in CH3CN, 1% Et3N), (ii) DCNP crude solution for positive control, and (iii) capillary (diameter: 1.2 mm) for the liquid sample collection (boiling point of GA: 247.5 °C at 477.5 °F, DCNP: 104 °C/19 mm Hg (lit.)) ( Figure 5a). The protocol: step 1, sampling the solution, which contain DCNP, by using a capillary; step 2, put the capillary into the vial through the polytetrafluoroethylene (PTFE)/silicon rubber screw cap and shake (by hand) after removing the capillary; and step 3, monitor the fluorescence changes with a hand-held 365 m UV lamp (Figure 5b). In order to verify these changes, we added the DCNP-positive control solution to the DMHN1 solution using the capillary (approximately 20 μL) and analyzed the fluorescence responses. Surprisingly, the bright blue fluorescence was monitored from 9 s and it became saturated within 21 s (Figure 5c, Figure S13, and SI Movie 1). With the current state of our prototype sensing kit, we could selectively and sensitively detect DCNP without sample pre-treatment in a real-time on-site situation. The next step of this study is to test the kit in a situation that requires handling the actual nerve agent, GA.

Sensing Kit Test for Real-Time Detection of DCNP
To utilize the potential of DMHN1, we prepared a prototype DCNP sensing kit for real-time on-site application. Prior to the kit development, a high photostability of DMHN1 was verified under strong light irradiation (365 nm, 3 W, 1 h) ( Figure S12). The components of the DCNP sensing kit were: (i) DMHN1 solution (10 µM in CH 3 CN, 1% Et 3 N), (ii) DCNP crude solution for positive control, and (iii) capillary (diameter: 1.2 mm) for the liquid sample collection (boiling point of GA: 247.5 • C at 477.5 • F, DCNP: 104 • C/19 mm Hg (lit.)) ( Figure 5a). The protocol: step 1, sampling the solution, which contain DCNP, by using a capillary; step 2, put the capillary into the vial through the polytetrafluoroethylene (PTFE)/silicon rubber screw cap and shake (by hand) after removing the capillary; and step 3, monitor the fluorescence changes with a hand-held 365 m UV lamp (Figure 5b). In order to verify these changes, we added the DCNP-positive control solution to the DMHN1 solution using the capillary (approximately 20 µL) and analyzed the fluorescence responses. Surprisingly, the bright blue fluorescence was monitored from 9 s and it became saturated within 21 s (Figure 5c, Figure S13, and SI Movie 1). With the current state of our prototype sensing kit, we could selectively and sensitively detect DCNP without sample pre-treatment in a real-time on-site situation. The next step of this study is to test the kit in a situation that requires handling the actual nerve agent, GA.

Conclusions
In conclusion, we developed a selective fluorescence turn-on probe, DMHN1, that allows the tracing of DCNP, a simulant of GA nerve gas. As a next-generation fluorescence probe, DMHN1 showed superior sensing ability of DCNP with high selectivity and sensitivity (8.16 ppm) and fast response time (<3 min), and it can be used in a real-time on-site situation. The sensing application of DMHN1 in the DCNP-moistened soils and the development of a proto-type sensing kit proved its potential for further studies. Within this study, the first new sensing approach was disclosed; fluorescent turn-on by reaction-based suppression of ESIPT fluorescence quenching in the intramolecular H-bonding containing D-A-type fluorophore. The fast and selective sensing abilities of DMHN1 encourage further applications in basic science as well as at war zone and crime scenes.