Optimization of Ampacity in High-Voltage Underground Cables with Thermal Backfill Using Dynamic PSO and Adaptive Strategies

: This article addresses challenges in the design of underground high-voltage transmission lines, focusing on thermal management and cable ampacity determination. It introduces an innovative proposal that adjusts the dimensions of the backfill to enhance ampacity, contrasting with the conventional approach of increasing the core cable’s cross-sectional area. The methodology employs a particle swarm optimization (PSO) technique with adaptive penalization and restart strategies, implemented in MATLAB for parameter autoadaptation. The article emphasizes more efficient solutions than traditional PSO, showcasing improved convergence and precise results (success probability of 66.1%). While traditional PSO is 81% faster, the proposed PSO stands out for its accuracy. The inclusion of thermal backfill results in an 18.45% increase in cable ampacity, considering variations in soil thermal resistivity, backfill properties, and ambient temperature. Additionally, a sensitivity analysis was conducted, revealing conservative values that support the proposal’s robustness. This approach emerges as a crucial tool for underground installation, contributing to continuous ampacity improvement and highlighting its impact on decision making in energy systems.


Introduction
As population density continues to rise, the demand for electrical energy experiences significant growth.In response to this challenge, electric companies are constantly seeking innovations to enhance the ampacity of their transmission and distribution systems to meet the growing demand.In densely populated environments, underground transmission lines emerge as the preferred option due to their easier installation compared to traditional overhead lines.
The ampacity of power cables is primarily based on the cross-sectional area of the conductor core, making it crucial to evaluate this parameter to meet specifications [1].This aspect has been extensively addressed in the literature and governed by international standards, such as those established by IEEE and IEC [2][3][4].Analytical methods supported by these organizations, based on the model proposed by Neher and McGrath [5], are commonly used to calculate the ampacity of power cables.
Over time, various specialized software tools have been developed to calculate ampacity in different cable configurations, taking into account various soil layers and installation conditions.Examples include programs like CYMCAP [6][7][8], ETAP [9], and COMSOL [10].
traditional MATLAB PSO, aiming to improve ampacity by adjusting the dimensions of the thermal backfill without increasing the cross-sectional area of the cable core.Through this research, we seek not only to optimize transmission efficiency but also to advance the understanding of the complexities associated with improvements in the implementation of the PSO algorithm.We aim to offer more effective and economically viable solutions for the electrical industry, marking a significant step in improving ampacity optimization practices in underground cables.

Cable Arrangement and Model
High-voltage underground cables in three-phase connection offer various installation configurations, with trefoil (Figure 1a) and flat (Figure 1b) arrangements being the most common.Each cable arrangement has its own unique advantages and disadvantages.According to the research by Quan et al. [42], the flat configuration, whether with or without thermal backfill, exhibits lower temperature rise compared to the trefoil arrangement.This phenomenon is attributed to the fact that in the trefoil arrangement, adjacent cables touching each other increase the temperature of the insulation due to internal conduction, leading to a decrease in their lifespan.The preference for the flat installation in this study is based on this thermal difference, highlighting its superior thermal performance and, consequently, greater operational reliability in the system.The use of backfill has a significant effect in reducing temperature in the underground electrical cable system.To achieve effective heat transfer from the cables, natural soil is generally replaced by a thermal backfill with a relatively low thermal resistivity, less than 1.0 K•m/W [1,2].
In Figure 2, the installation method with regular transposition and arrangement of cables, along with all relevant variables for the optimization problem, is shown.Additionally, a segmented conductor cable model (see Figure 3) is used to minimize skin and proximity effects in conductors with large cross-sections [43].The thermal and electrical parameters of the cable are detailed in Table 1, based on manufacturer specifications [44].The cable depicted is a segmented compacted copper conductor, with a screen made of extruded semiconductor.The insulation of the cable is made of a high-quality dry-cured XLPE compound, which is resistant to heat, moisture, and abrasion.The insulation is shielded by a semiconductor tape that is firmly adhered to it.Additionally, the outer covering of the cable is composed of a thermoplastic material (such as PVC, PE, or similar materials) that is continuously extruded over the metallic layer or moisture barrier of the cable.

Ampacity Calculation
To understand the ampacity of cables in underground systems, it is crucial to examine the heat generation resulting from the current flow through the conductor.This thermal efficiency, along with the temperature limits of the insulation, is directly related to the cable's ampacity.In the context of underground cables in homogeneous soils, heat transfer occurs primarily through conduction across the cable components and the surrounding soil.When formulating the problem in two dimensions due to the significantly greater length than the cable diameter, heat conduction in the soil is described by the differential equation [2]: where ρ is the thermal resistivity in K•m/W, W int is the heat flux generated in J/s, and c is the volumetric heat capacity.When solving the heat transfer equation for underground cables, the temperature around the cable is estimated-an essential aspect for evaluating compliance with insulation temperature limits and, consequently, determining ampacity.
The solution to this equation allows estimating the cable temperature at any point around it, a crucial factor in evaluating compliance with insulation temperature limits and, consequently, determining cable ampacity.Two methods are employed to solve Equation (1): the analytical method, providing exact solutions in closed mathematical form, and the numerical method [7].While the analytical method, though precise, has limitations for complex and realistic problems, especially when the geometry of the arrangement of underground cables is complicated.In contrast, the numerical method, although requiring iterations for approximate solutions, offers flexibility to analyze complex cable systems and apply more realistic boundary conditions.A practical solution to the heat dissipation problem leverages the fundamental similarity between heat flow due to the temperature difference between the conductor and its surroundings and the flow of electric current caused by a potential difference [2].Given the complexity of the ampacity problem, the solution proposed by Neher and McGrath in 1957 remains foundational, forming the basis for IEEE and IEC standards [3].
Figure 4 presents the thermo-electric equivalence network of the cable and its surroundings.In this representation, the losses in the conductor, corrugated aluminum sheath, and dielectric are denoted as W c , W s , and W d (W/m), respectively.Additionally, the thermal resistances per unit length, T 1 , T 2 , and T 3 (K•m/W), are shown, corresponding to the thermal resistance of the insulation layer, the thermal resistance of the cable's outer sheath, and the thermal resistance between the cable surface and the surrounding medium.
In the specific case of a cable with corrugated aluminum sheath (with an armor loss factor λ 2 = 0), the losses can be expressed by the following equation [2,45]: where λ 1 , the sheath loss factor, is defined as the ratio of the total losses in the metallic sheath to the total losses in the conductor.
In practice, non-conductive layers of the cable, such as insulation and the separating cover, impede the heat flow from the cables.These layers generally have a cylindrical shape.If we consider a constant thermal resistivity ρ and the inner and outer radii of a layer as r 1 and r 2 , respectively, the thermal resistance of a cylindrical layer per unit length can be calculated using the reference [5].The thermal resistance of the metallic parts of the cable, although not equal to zero, is often negligible in ampacity calculations [46].Ampacity is determined by considering the calculation of temperature-dependent conductor loss W c = I 2 R, and we obtain: where ∆θ is the allowed temperature rise of the cable conductor above the ambient temperature.n denotes the number of conductors in the cable.The dielectric loss (W d ) and the alternating current electrical resistance (R ac ) of the metallic parts of the cable are calculated using the corresponding equations: )   where: The correction factors for the proximity effect (k p ) and the skin effect (k s ) vary depending on the type of cable, as detailed in references [1,12].Additionally, the parameter λ 1 , highlighted as one of the most relevant and effective, is influenced by the backfill dimensions, the distance between cables (s), and the cable model with corrugated sheath [40].This loss factor (λ 1 ) consists of losses due to circulating currents (λ ′ 1 ) and Foucault currents (λ ′′ 1 ) [3,47].For three single-core cables, as illustrated in Figure 2, the loss factor due to Foucault currents is calculated as follows [2]:

Thermal External Resistance
When the burial depth of the cable (L) significantly exceeds its external diameter (D e ) in soil with resistivity ρ, the thermal resistance of the surrounding medium can be calculated using Equation (3), replacing r 2 with 4L and r 1 with D e .To enhance heat dissipation in buried cables, it is common to replace part of the native soil around the cables with a thermal backfill material [15].This is because the external thermal resistance contributes to over 70% of the temperature rise in the conductor of buried cables [2,14].In practice, high-voltage cables are often placed in backfill material to improve heat dissipation and reduce thermal resistance.Figure 2 illustrates cables arranged on backfill, and the external thermal resistance is described by the following equation [2]: where N is the number of cables in the backfill envelope, and L G represents the depth of the center of the rectangular backfill measured from the ground surface.The geometric factor G b encompasses all design parameters through the values of L G and the equivalent radius r b .This concept was initially introduced in [5] as an integral part of backfill analysis.
For a single-core cable buried under an isothermal plane, the factor F represents the mutual heating effect of other cables in a system with equal load, and for cable p, it is expressed as:

Development of the Proposed Approach
The innovation of this article lies in the presentation of an advanced algorithm designed to optimize the ampacity of underground cables specifically allocated in the backfill.This pioneering approach accurately addresses the challenges associated with determining the optimal dimensions of the trench, thermal backfill, and cable ampacity, especially in unfavorable environments for high-voltage transmission, considering comprehensively economic and physical installation constraints.

Formulation of the Objective Function
Equations ( 4) and ( 7) are directly influenced by the characteristics of the backfill and the thermal conductivity properties of the soil.Some parameters, such as the thermal resistivity of the soil and ambient temperature, are inherently random, fluctuating along the cable route due to climatic and seasonal variations.In this study, we will assume these parameters to be constants.
In the evolutionary metaheuristic algorithms community, various approaches have been proposed, with the use of penalty functions being the most common.However, these functions have drawbacks, such as the need to adjust multiple parameters, complicating the search for the optimal combination [48,49].Additionally, solution exploration can be slow, with no guarantee of reaching the optimal solution.To overcome these limitations, modifications to algorithms have been made by introducing the concept of parameter-free penalty functions [48,50,51].These penalty strategies play a crucial role in balancing the optimization of the objective function and compliance with constraints.In our research, we specifically evaluate adaptive penalization, focusing on the penalty function given by The introduction of the penalization parameter λ (a significantly large number) aims to ensure that the violation of the constraint g i (x) is of a similar order of magnitude to the value of the objective function I(x).In the case of equality constraints, it is commonly addressed by converting them into approximations of inequality constraints, following the form g (i+k) (x) ≈ h k (x) − δ ≤ 0. This implies an increase in the total number of inequality constraints to j = q + m, where q is the initial number of inequality constraints, and m is the number of equality constraints.Therefore, the term q in Equation ( 9) is replaced by j to incorporate both inequality and equality constraints.

Formulation of Constraints
The design variables include the determination of various parameters, such as the depth of the backfill center (L G ), cable depth (L), spacing between cables (s), backfill width, and thickness (w, h), among others.
With the aim of achieving the optimal configuration and maximizing ampacity, the economic constraint of backfill and installation cost is incorporated as a crucial factor in the optimization method.Additionally, there are physical installation constraints that must be considered in the objective function and are expressed through the following equation: where the cost function C is calculated using the cost parameter values listed in Table 2 and the information presented in Figure 2. It is important to note that the total cost should not exceed the budget C 1 , and physical and design limits are imposed on variables, as illustrated in Figure 2 and detailed in Table 3.The lower limit is determined by physical conditions, while the upper limit is constrained by the cost of backfill material in the optimization process [2,45].Additionally, the ampacity constraint is simply expressed as I ≥ I Load .

Variable Lower Limit (m)
Limite Superior (m)

Optimization Technique
Stochastic metaheuristics, such as GA and PSO [30,53,54], are preferred in real-world applications due to their mathematical simplicity, ability to address large-scale problems [31,55], and capability to achieve globally optimal solutions in short times [56].Over time, PSO has demonstrated outstanding performance in areas such as networks, robotics, and power generation, standing out among other nature-inspired algorithms, such as Simulated Annealing (SA), GA, Differential Evolution, Firefly, and Cuckoo.Its distinctive ability to combine local and global search, adaptability, simple structure, fast convergence, ease of implementation, and fewer parameters, along with its widespread acceptance in various fields, position it as a versatile algorithm with superior performance [31,32,34,35].
In various current applications, PSO has shown success by adapting to specific problematics.For example, it has been used to optimize generation scheduling in hybrid renewable energy systems, reducing operational costs [33].It has also excelled in the optimization of Brayton cycles with solar technologies and dual regenerative systems, effectively achieving irreversibility minimization [36].In other areas, such as sEMG signal detection and the identification of optimal parameter sets for solar water heaters, PSO has demonstrated precision and effectiveness [37,38].Additionally, [57] proposes the use of Enhanced Particle Swarm Optimization (EPSO) to minimize energy losses in electrical networks, overcoming the limitations of conventional PSO, while [58] introduces a novel variant, PSO_ML-FSSO, for the Maximum Power Point Tracking (MPPT) task in photovoltaic solar systems, surpassing other known methods in efficiency and settling time.
Recently, there has been a growing interest in hybridizing PSO with other algorithms, such as Discrete Cuckoo Search Particle Swarm Optimization (DCSPSO) [59], and the combination approach of Firefly and PSO (FFA-PSO) to enhance the stability of microgrids [60].Additionally, the authors of [61] explored the impact of process factors, such as the methanol-oil ratio, ultrasonic power, reaction temperature, reaction time, and pulse frequency, on biodiesel performance using an RSM-GA-PSO hybrid optimization approach.Although these hybrid approaches offer advantages, their computational complexity sometimes poses challenges.
Despite advances in the literature, a gap is identified in the implementation of PSO algorithms that integrate dynamic parameter adaptation and adaptive restart.These features are crucial for stabilizing the algorithm, improving both exploration and exploitation of solutions in the search space.
The PSO algorithm begins its execution by generating random solutions called particles.The population is represented as X = [X 1 , X 2 , X 3 , ..., X N ] T , where N indicates the population size, and T denotes transposition.Each particle Xi(i = 1, 2, ..., N) represents an individual in the population and is described as X i (X i1 , X i2 , X i3 , ..., X iD ), with D being the dimension of the search space.
PSO relies on individual experience (Pbest), collective experience (Gbest), and the current movement of particles to determine their next positions in the search space.Experiences are incorporated through two acceleration factors (c 1 and c 2 ) and two random numbers generated in the interval [0,1].Simultaneously, the current movement is modulated by an inertia factor (w), whose value varies between w min and w max .The initial velocity of the population is represented as The following pseudocode presents an adapted version of the PSO algorithm for the optimization of underground cables.Two key elements are highlighted: dynamic parameter adaptation and adaptive restart.The fundamental steps of the proposed PSO algorithm are summarized in Algorithm 1.

3.
Initialization: • For each particle i in the population: -Initialize the position X i and velocity V i randomly within the defined limits.Calculate the new velocity of the particle using the standard PSO update formula: Update the particle's position and apply domain constraints: -Store the best global fitness at each iteration.
In the provided pseudocode, the objective function with autoadaptive penalization is implemented using Equation ( 9), where g j (x) is defined according to Equation (10) and takes the form g j (x) ≤ 0. Significant penalties have been integrated into the objective function, proportional to the magnitude of constraint violations, resulting in a high penalty (10 7 ) for each violated constraint.During the dynamic adaptation of parameters, the update of particle velocities and positions is performed, followed by the evaluation of fitness with penalization.In this process, f (X k+1 i ) represents the objective function with incorporated penalization.The code ensures that solutions generated during optimization comply with the problem's constraints by applying penalties when necessary.This strategy strongly encourages the PSO algorithm to converge towards feasible solutions that satisfy the established constraints.The adjusted objective function is evaluated in each iteration of the PSO algorithm, thereby contributing to the efficient search for optimal solutions in the design space.
To enhance understanding of the implemented optimization process, a detailed flowchart has been created and is shown in Figure 6.This diagram illustrates the sequence of steps in the algorithm, starting from the configuration of initial parameters to the evaluation of particle fitness using the autoadaptive penalized objective function, known as the "fitness function".This visual representation provides a clear and concise overview of the optimization algorithm's workflow.

Simulation Results
The proposed method was evaluated on the cable system shown in Figure 2, based on the cable type illustrated in Figure 3. Design variables were constrained to a specific range detailed in Table 3.An upper limit of USD 300 was set for the installation cost (C 1 ).Constant parameters, such as the thermal resistivity of native soil under normal conditions (ρ s = 2.5 K•m/W), backfill thermal resistivity (ρ r = 0.5 K•m/W), and ambient temperature (θ amb = 25 °C), were obtained from [45].
The proposed optimization problem, defined by Equation ( 9) and its constraints in Equation ( 10), was addressed using two approaches: traditional MATLAB PSO (version R2016a, 9.0.0.341360) and the proposed PSO.While traditional PSO is widely used and executed through "particleswarm", requiring manual parameter adjustments, unlike our proposed PSO meticulously tailored for underground cable ampacity optimization.The proposed version incorporates dynamic parameter adaptation and adaptive restart, improves the stopping criterion, and was evaluated alongside traditional PSO under penalty functions for a fair comparison.All tests were conducted in MATLAB R2016a, using an Intel(R) Core(TM) i7-8750H CPU @ 2.20 GHz, 2.21 GHz, with 12.00 GB of RAM.This study highlights the distinctive features of the proposed PSO, supporting its utility and emphasizing its significant improvement over traditional PSO in exploring the search space.
The PSO algorithm parameters were carefully selected: a population of 100, inertial weight (w) from 1 to 0.1, modified acceleration coefficients (c 1 and c 2 ) from 2 to 1.An adaptive restart strategy with a 2% probability at each iteration was implemented to encourage exploration.These specific values are chosen to enhance the convergence and efficiency of the PSO algorithm in ampacity optimization.
Three independent runs of the proposed PSO algorithm and the traditional PSO were conducted, as depicted in Figure 7.The proposed PSO (Figure 7a) stands out for its rapid convergence, achieving the goal in 30 iterations, in contrast to the 200 iterations of the traditional MATLAB PSO (Figure 7b).This efficiency suggests a higher exploitation capacity, swiftly focusing on promising solutions.Additionally, both algorithms exhibit notable stability over time, as solutions show no significant improvements.This indicates that both algorithms converge towards an optimal solution more quickly in fewer iterations.Furthermore, in the figures, a slight variability in the convergence for the proposed algorithm is observed, with higher variability for the traditional PSO, attributable to its stochastic nature.The enhanced implementation of the proposed algorithm, featuring dynamic adaptation and adaptive restart, contributes to stability and coherence by reducing fluctuations and enhancing convergence.Adaptive restart, strategically restarting particles, generates consistent and reliable results across various executions.Without these improvements, results tend to be more unstable.The effectiveness of dynamic adaptation and restart depends on the problem, making multiple runs and statistical analyses crucial for robust performance evaluation.
To assess performance, each algorithm was executed 1000 times.The optimal results, recorded for cable ampacity in each run, are visually presented in Figures 8a and 9a.Additionally, algorithm performances are detailed in Table 4, providing crucial information such as the best ampacity value, average, and standard deviation, among other relevant aspects.When comparing results between the proposed PSO algorithm and the traditional PSO, notable differences in terms of accuracy, performance, and consistency are highlighted.The histogram analysis in Figures 8b and 9b reveals that the maximum value is most frequently recorded in the range of 1156 to 1157 A. The success probability for this interval is 66.1% in the proposed PSO and 56.4% in the traditional PSO, respectively.Although traditional PSO is 81% faster, the proposed PSO stands out for its accuracy.Despite being slower, its precise approach makes it ideal when accuracy is crucial.Additionally, its simplicity and clarity facilitate understanding and adjustment, being accessible with fewer parameters than the traditional approach.The introduction of restart probabilities and dynamic adaptation enhances the exploration of the search space, achieving more efficient convergences.This code is a valuable tool for intuitively and effectively addressing optimization problems.
Based on these comparisons and analyses, the proposed algorithm is selected as the most suitable, effective, and reliable for conducting comparisons in cable ampacity optimization with and without backfill.The notable results are presented in Table 5.Initially, the cable ampacity without considering backfill is 980.883 A. This would imply the need to use a conductor with a larger cross-sectional area to support a load current of 1000 A. However, by applying ampacity optimization considering the backfill configuration, the cable ampacity increases to 1156.9 A, making it suitable for a load current of 1000 A. Therefore, the percentage increase in the ampacity of the cable installed with backfill compared to the cable without backfill is approximately 18.45%.This highlights the benefits of backfill in cable ampacity optimization.
Figure 10 indicates that ampacity is maximum at s = 2.3 m, albeit at a high cost.Below this value, it decreases due to the proximity effect, while above it decreases due to increased thermal resistivity.The increase in backfill volume directly affects the total installation cost, influencing ampacity up to a balance point, beyond which it decreases (Figure 11).It is essential to note that increasing the backfill volume does not guarantee an unlimited increase in ampacity.The proximity effect influences the spacing between cables (s), and with a constant backfill width (w), current losses decrease due to better dissipation and reduced electrical resistance provided by the backfill.The optimum value of s that maximizes ampacity is reached when both effects balance each other.Our proposal suggests delaying or avoiding investments in larger-section cables for underground lines, focusing on the use of backfill materials to achieve optimal ampacity at a more favorable cost.Additionally, in places where cables are already overloaded, the addition of backfill could be considered instead of installing larger-section cables.
The ampacity of buried cables is often based on constant values of ρ s and θ a .Although relatively high values for these variables are usually assumed, relying on designer estimates and available records, it is essential to note that they may experience unforeseen variations during cable operation, influenced by climatic and geographical changes along the route and during different seasons of the year.It is crucial to consider that these variations directly impact the cable's ampacity.In response to these fluctuations, sensitivity information has been developed to assess cable ampacity, using dimensionless measures represented by S ρ s and S θ [2,16].
These sensitivity parameters indicate how the cable's ampacity varies concerning ρ s and θ a at the nominal point.To calculate sensitivity coefficients, partial derivatives are taken in Equation (4).In practical designs, both S ρ s and S θ are negative, indicating that the cable's ampacity decreases with an increase in ρ s and θ a .Sensitivity contours, based on nominal values of ρ s = 2.5 K•m/W, θ amb = 25 • C, and I = 1156.915A(Table 5), reveal an ampacity sensitivity to soil resistivity, S ρ = −0.3999.This value indicates that an increase in the thermal resistivity of the soil by ∆ρ s = 0.5 K•m/W from the nominal value of 2.5 K•m/W (a 20% percentage variation) will result in a change ∆I ρ in the allowable cable ampacity, equal to The choice of the considered variations depends on the context and the desired precision.There is no single correct value, as it can vary depending on the actual magnitude of the variations.In the absence of specific information about variability and with the intention of being conservative, a discussed conservative percentage has been selected in the previous paragraphs.
When the design experiences simultaneous changes in soil thermal resistivity and ambient temperature, the total change in ampacity is calculated as ∆I = ∆I ρ + ∆I θ = −92.527− 94.28 = −186.80A resulting in a cable ampacity of 970.115 A.
These sensitivity results indicate that variations in parameters significantly impact the cable ampacity, either decreasing or increasing based on positive or negative changes.It is recommended to conduct a sensitivity analysis over a broader range of variations to capture the full impact of simultaneous changes in environmental conditions on cable ampacity.This will provide a more detailed and robust insight for the design of buried cables.Given the variable nature of environmental conditions, a probabilistic approach could be considered in future studies, along with evaluating variations in the cable's crosssectional area to enhance ampacity.This involves assessing cable ampacity in terms of probability distributions for ρ s and θ a in a broader context, offering a more comprehensive understanding of the associated uncertainty.

Conclusions
This study has comprehensively addressed the challenge of optimizing the ampacity in 220 kV underground electric cables with XLPE insulation installed in thermal backfill.Our proposal successfully combines the PSO algorithm with significant improvements in implementation, such as an adaptive penalization function, adaptive restart strategies, and parameter self-adaptation.By comparing the results with traditional MATLAB PSO, we have conclusively demonstrated that our approach overcomes limitations associated with result variability and ensures efficiency in searching for the optimal ampacity value and design variables.
The obtained results are promising, highlighting a success probability of 66.1% in finding the optimal ampacity value, contrasting with the traditional approach's 56.4%.Furthermore, we achieved an optimal ampacity of 1156.9A for the cable with thermal backfill, along with specific dimensions and a cost of $94.7/m 3 .This accomplishment translates into a significant 18.45% increase in ampacity compared to the cable without thermal backfill, confirming the effectiveness of our proposal.
The conducted sensitivity analysis emphasizes the importance of considering factors such as soil thermal resistivity and ambient temperature, which significantly affect cable ampacity.This knowledge provides a solid foundation for addressing variations in environmental conditions and strengthens the robustness of our design.Moreover, our proposal not only focuses on improving ampacity by adjusting thermal backfill instead of increasing the core cable's cross-sectional area but also on the enhanced implementation of PSO.This technical and efficient perspective offers decision makers in energy systems a valuable and easily implementable tool with potential applications in various areas.As future work, we propose evaluating the simultaneous optimization of cable cost and ampacity using a probabilistic approach, contributing to advancements in electrical system optimization.

Figure 1 .
Figure 1.Types of underground cable installation in three-phase transmission lines.(a) Trifoil formation, and (b) Flat formation.

Figure 4 .
Figure 4. Thermo-electric equivalence network model for underground cable.

dFigure 5 .
Figure 5. Arrangement of cables and their images on an isothermal plane for the calculation of the F-factor.

Figure 6 .
Figure 6.Flowchart of the proposed algorithms.

Figure 10 .
Figure10.Effect of cable spacing on cable ampacity.In the bottom right corner, the flat formation installation is depicted within the thermal backfill.

3 )Figure 11 .
Figure 11.Relationship among Ampacity, Total Cost, and Backfill Volume, Including Their Projections on the Vertical Planes.

Table 3 .
Limits of the design variables.

Table 4 .
Performance results of algorithms in 1000 runs.