Uncertainty in Unit Commitment in Power Systems: A Review of Models, Methods, and Applications

: The unit commitment problem (UCP) is one of the key and fundamental concerns in the operation, monitoring, and control of power systems. Uncertainty management in a UCP has been of great interest to both operators and researchers. The uncertainties that are considered in a UCP can be classiﬁed as technical (outages, forecast errors, and plugin electric vehicle (PEV) penetration), economic (electricity prices), and “epidemics, pandemics, and disasters” (techno-socio-economic). Various methods have been developed to model the uncertainties of these parameters, such as stochastic programming, probabilistic methods, chance-constrained programming (CCP), robust optimization, risk-based optimization, the hierarchical scheduling strategy, and information gap decision theory. This paper reviews methods of uncertainty management, parameter modeling, simulation tools, and test systems.


Introduction
A UCP involves the optimization of the ON/OFF states of generation units by minimizing the total operational cost while considering different constraints, in a particular period, generally one day/week.This problem arises mainly from the changing nature of human activities, which result in frequent load changes in each interval (minute, hour, day).Changes in load patterns require a change in available generation power plants.Mathematically, this problem is to optimize a set of completely mixed and nonlinear integer equations under different constraints to minimize the operational cost by solving the optimal combination of units from all possible scenarios.
In the last century, the UCP has continued to be significant, on account of developments and other changes in the power industry.Environmental policies, restructuring, privatization of the grid, penetration of RE, and the advent of smart grids have resulted in many changes and randomness in the power grid.
Uncertainties associated with various input parameters in the grid have raised several operational issues for system operators and other stakeholders.According to Ebeed et al. [1], the uncertainties of the parameters can be classified into two general categories:uncertainties of technical parameters and those of economic parameters.The COVID -19 pandemic has resulted in an unexpected global economic and social dilemma [2], leading to the identification of a third category of "epidemics, pandemics, and disasters", all of which have techno-socio-economic effects on the energy sector.
Uncertainty affects schedules and may raise new challenges for the power grid.Various techniques and methods have been studied and employed to control the consequences of uncertainties associated with parameters.
Different studies and reviews were published considering uncertainty management.Uncertainty management can be implemented using different decision -making techniques [3] and various system optimization algorithms [4][5][6][7].Abujarad et al. [5] discussed different optimization approaches for a UCP considering intermittent renewable energy resources.Dai et al. [6] provided a summary of different SP applications in a UCP.Lastly, Jurković et al. [7] highlighted the advantages and disadvantages of commonly used methods (stochastic, robust, and interval) in UCPs for uncertainty management.Unlike previous studies, this paper will focus on a review of previously implemented methods such as stochastic programming, probabilistic methods, CCP, RO, risk-based optimization, hierarchical scheduling strategy, and IGDT in uncertainty management considering technical, economical, and "epidemics, pandemics, and disasters" parameters.
The objectives of this paper are as follows: 1.
Delve into research that has considered uncertainty in the unit commitment problem.2.
Discuss models, methods, test systems, and simulation tools that are used for uncertainty management.

3.
General comparison of different methods in terms of hardware specification, solver, run -time, and results.
This paper is structured as follows: Section 2 formulates the general unit commitment problem.Section 3 shows the modeling of different uncertainties that are considered in relation to unit commitment.Section 4 briefly reviews methods or techniques that are used to address these uncertainties.Section 5 addresses the different constraints that are applied in each method as well as the implemented test systems and simulation tools.Section 6 presents general notes on reviewed methods or techniques in addressing uncertainties.Lastly, Section 7 concludes by presenting the most important findings.

Unit Commitment Formulation
A UCP is a high-dimensional, mixed-variable, and complex problem because of its combinatorial behavior.The UCP involves the minimization of cost or maximization of profit.The formulation in this section involves all commonly used cost functions and constraints from various studies.Section 5 will summarize them.

Objective Function
The general expression of the objective function in the UCP is minimizing the total cost of running all the units for a given time.The difference between TC and TR is defined as, where TC, or total operation cost, is specified mainly in terms of fuel cost, shutdown, start-up, emissions, and social welfare cost.TR represents the total revenue because of market involvement.The essential parameter that affects TR is the payment method, which is specified in terms of market operations and market-clearing mechanisms.All of these must be optimized by taking into account the constraints that govern the problem.In the classical UCP, TR is not considered because the market is regulated.

Different Terms of Objective Function
Section 2.2 presents the terms associated with TC and TR.

Total Cost Terms
The five cost terms are fuel, start-up, shutdown, emission, and social welfare cost functions.
TC is calculated as, The social welfare and emission functions are not directly included in the TC term and will be considered in a multi-objective optimization framework.

Fuel Cost Function
The fuel cost function of a thermal generator is given in quadratic form.The conventional form of this function is as follows.
Social Welfare Function Social welfare function involves the so-called penalty cost function.Social welfare is maximized when this penalty cost function is minimized.Table 1 shows the different models of this function and the studies that consider them.

Shutdown Cost
Most of the time, the shutdown cost is constant.This cost is developed as a constant term for each thermal generator, which is shut down in a specified hour.

Total Revenue of Generation Companies
The total revenue is taken from the sales of power.The three main approaches for payment are PPD, PRA, and PPRP.Abdi reviewed these methods [54].

Problem Constraints
This subsection presents the primary constraints in the UCP.

System Constraints
System constraints, known as global constraints, are important in the UCP.The main system constraints are as follows.
System Energy Balance or Real Power Constraints ∑ N i=1 P t gi X t i ≤ P t d t = 1, . . ., T Energy Constraints Reserve Constraints N ∑ i=1 R t gi X t i ≥ SR t t = 1, . . ., T Transmission Losses The transmission losses are considered as follows. P Unit Status Limits Several units may be needed to be online at a specified duration (must run) or may become offline due to scheduled maintenance or forced outages (must not run), due to reliability issues, economic factors, or operating limitations.

Security Constraints
In the SCUCP, security constraints are developed as follows.
AC Power Flow Constraints Transmission Line MVA Flow Limits

Modeling of Uncertainty
The challenges that are raised by uncertain parameters in the power grid have encouraged operators to use different uncertainty modeling techniques to prepare for their consequences and to make the best decisions.Table 2 shows works concerning each category of uncertainty.

Wind Energy Uncertainty Model
Wind speed is an important parameter in determining wind energy output.The distribution of wind speeds can be modeled as a Weibull PDF or as Rayleigh PDF.Equations ( 22) and ( 23) describe the Weibull PDF and Rayleigh PDF of wind speed [23], respectively.
A Weibull PDF with β = 2 is called a Rayleigh PDF.
The output wind power can be expressed by means of various models.

PV Energy Uncertainty Model
The PV energy output is affected by the irradiance at the location.The probability distribution of irradiance is represented as a lognormal PDF as follows [127][128][129].
The probability distribution of solar irradiance can also be expressed using the Beta distribution function as follows.
where β and α are parameters in the beta probability function.The parameter of the Beta PDF can be assessed using the standard deviation and mean of the random variable [128,129]: The output PV power can be expressed using different models.Table 5 presents commonly used models.

PEVs Uncertainty Model
The random nature of PEVS were considered and modeled using normal or Gaussian PDFs [127,131].Table 6 presents various random variables that are related with PEVs.The PEV's daily arrival time is a common random variable that can be considered in the modeling uncertainties associated with PEV.

Load Growth Uncertainty Model
Load growth is essential information in the research of a power system; it is also considered to be a random parameter.P L (0) denotes the initial load in the base year while ∆P L (y) is the incremental load growth in year y.Therefore, the load in year y is P L (y)= P L (0)+∆P L (y).Its PDF can be expressed as follows [122]:

Electricity Price Uncertainty Model
Electricity price bought from the grid can also cause uncertainties in power system operation.The PDF of the electric price can be expressed as follows.[120,132] f EP (EP) = 1

Epidemics, Pandemics, and Disasters
Natural disasters such as typhoons, droughts, tsunamis, and earthquakes may generate uncertainty in the power grid.No base model exists for this category as each type of disaster can have certain consequences in the system (it can cause outages of power system components, a deficiency of supply, or excess supply).Huang et al. modeled the spillage of water from hydropower plants as an uncertain parameter [100].Arab et al. proposed a post-disaster model that considered whether a component was "damaged" or "functional" [116].Components that are classified as "damaged" undergo repairs for a specified time, and the VOLL is included in the UCP.Zhao et al. considered the worst load forecasting and line failure scenario in the UCP after a hurricane has occurred [36].Pandemics and epidemics are presently highly significant,-specifically due to the COVID-19 pandemic [2].This category will motivate new studies and modeling techniques since it influences the energy sector not only techno-economically but socially as well.

Different Methods Used for Uncertainty in Unit Commitment
The previous section considered the models of different uncertain parameters in the power grid.Different methods are required to solve the UCP with these uncertain parameters.Ebeed et al. [1] and Majidi et al. [133] classified these methods as possibilistic, probabilistic, hybrid possibilistic -probabilistic, IGDT, robust optimization, and interval analysis.This section discusses the methods considered in the literature review.

Stochastic Programming
SP is an approach that is risk-neutral and optimizes the expected outcome over a known probability distribution.Li et al. provided a brief history and review of stochastic programming methods [134].They also discussed instances of SP, such as two -stage SP, multistage SP, multistage SP that goes through endogenous uncertainty, and scenario tree generation that is data-driven.Table 7 presents studies in which stochastic programming was used and the uncertain parameters modeled.

Uncertainty Model
Ref.

Remarks
Demand [11] MCS is performed to generate possible outcomes.SAA replaces the expected value function.
The chance constraint is substituted by MILP reformulation.The price -elastic demand curve can be acquired by historical and simulation data analysis.

Demand [17]
A low expected total cost results from the novel unified stochastic and RUC model while ensuring system robustness.
Wind Power [12] The WILMAR model is used.This model consists of two parts: -the scheduling model and STT.The main use of STT is to create scenarios used as inputs to the scheduling model.The STT is used to generate scenarios that are used as inputs to the scheduling model.The required wind and load scenarios are generated through the MCS of the wind and load forecast error coming from and based on an auto-regressive moving average model that illustrates the wind speed forecast error.The varied probable scenarios generated are then reduced in number using a scenario reduction approach.A stochastic, mixed -integer optimization model is applied for the scheduling model.

Uncertainty Model Ref. Remarks
Wind Power [33] Wind generation uncertainty is presented using different scenarios that capture all feasible realizations of the stochastic process.An appropriate set of scenarios were generated using a time series model.SP by market -clearing model was used to calculate the required reserve levels and their associated costs on a daily time horizon.
Wind Power [34] Proposes analytical EENS and LOLP indices to which wind power uncertainties contribute, using the Q -function approximation.
Wind Power [42] Weibull PDF was proposed to characterize the stochastic wind speed characteristic.WECS is included in the ED problem model.Together with the classic ED factors, other factors that account for both the overestimation and the underestimation of available wind power are included.
Wind Power [43] This model optimizes the dispatch and commitment of power generating units in the electricity system by minimizing operating costs.
The scenario tree approach is used to model wind power uncertainty.
Wind Power [51] The potential value of ESU in power systems with renewable penetration are determined using a two -step framework.The first step uses a stochastic unit commitment with energy storage and wind power generation forecast uncertainty.
In the second step, the stochastic unit commitment solution is applied to obtain a flexible schedule for energy storage in economic dispatch with a limited look-ahead horizon.GP regression is applied to generate the wind scenarios which account for the errors in the NWP.
Wind Power [58] Stochastic unit commitment including input and rolling planning scenarios, based on wind forecasts, is proposed.STT is established that allows forecast error statistics to be modified and simplifies the study of the impacts of statistics on system operation and UC.
Wind Power [73] The proposed scheme differs from already known unit commitments in such a way of explicitly modeling the day -ahead predicted residual demand PDF, including the effect of wind power curtailment.
Wind Power [89] The forecasted sporadic wind power generation is included in the UCP and solved in the master problem.Benders' cuts are generated and combined with the master problem to revise the commitment solution if the dispatch fails.Possible scenarios are simulated by MCS to represent wind power volatility.The computational requirement for simulating many scenarios are reduced by the scenario reduction technique.
Wind Power [91] Describes a computational framework that combines an advanced NWP model in economic dispatch/stochastic unit commitment formulations.Enhances the NWP model with an ensemble -based uncertainty quantification approach that is realized in a distributed -memory parallel computing architecture.Wind Power [95] Development of an Artificial Neural Network -based wind forecast model that considers wind generation uncertainty by using the probabilistic concept of a confidence interval.
Wind Power [96] The stochastic bottom -up electricity market model optimizes unit commitment taking into account five kinds of market and considering the prediction error and stochastic behavior of wind power generation.
It can be used to evaluate varying electricity prices and system costs because of wind power integration and to study integration measures.
Wind Power [97] Wind power is approximated using a normal PDF.
Many scenarios are generated by MCS in describing the stochastic nature of wind power output.The generated scenarios are separated into three types (typical, normal, extreme) using CFSDP.Extreme scenarios are discovered to establish the on/off states of generators, and the typical scenarios are utilized to solve the day -ahead SCED problem.
The impact of wind uncertainty on FDCUCP is considered using interval -based optimization.
The original nonlinear model is reformulated to an MILP problem using the reformulation -linearization technique.
Wind Power and Demand [30] The optimal schedule of generation units and the required flexible ramp and spinning reserves on a daily horizon are implemented on a proposed stochastic NCUC model that includes uncertainties of demand and wind power.Reduction of scenarios in modeling demand and wind power uncertainties is implemented using PEM.Worst -case scenarios that are based on regional wind and demand variations are defined and incorporated into the proposed model together with the PEM scenarios.
Wind Power and Demand [57] This paper formulates a short -term forward electricity market clearing problem with stochastic security that is capable of accounting for variable and non -dispatchable wind power generation sources.Demand is modeled using a normal distribution function.
Wind speed is modeled using a Rayleigh distribution function.
Renewable Energy [44] Establishes a stochastic gas -power -network-constrained unit commitment model that considers both combined -cycle units and gas networks.ADP is proposed to prevent the curse of dimensionality.Renewable energy output is modeled using a probabilistic distribution function.

Uncertainty Model Ref. Remarks
Renewable Energy and Demand [111] A stochastic programming model of the short -term peak shaving operation of a photovoltaic -wind -hydro hybrid system is implemented.
The renewable energy production and load demand uncertainties are simulated using scenario trees and synthetic ensemble forecasts.
Solar, Wind, and Demand [123] RTED is carried out every 5 -15 min using static snapshot forecast data.
The minute-to-minute variability of wind, PV, and demand on a given scheduling period is considered in the evaluation of "best-fit" PFs.The Weibull probability density function is obtained from the wind and solar profiles.Load demand is modeled using a normal PDF.
PEV [86] Suggests a new stochastic framework based upon UT in modeling uncertainties related with PEVs' behaviors in considering the correlated WTs' power generation.
PEV, Demand and Wind Power [72] MCS is utilized in the proposed stochastic model.PEV energy consumption patterns, load forecast errors, and the number of PEVs in a fleet are characterized by truncated normal PDFs.
Wind speed variations are simulated by the Weibull PDFs, diurnal pattern, and auto correlation factor, and wind generation is found by incorporating it to a wind turbine power curve and wind speed at wind sites.Forward backward and forward algorithms are created to reduce the number of scenarios while providing acceptable accuracy.
PEV, Demand and PV [75] The scheduling of local electricity flows is presented using a central planner -decentral operator method.
The central planner performs a two-stage optimization to derive the demand limit and a corresponding battery schedule.The decentral operator, on the other hand, applies the battery schedule and heuristically reacts to unforeseen deviations between the actual and forecasted generation and demand.
The reserve capacity and relaxation factor of the battery are derived from MCS that considers underlying uncertainties.
PEV and Wind Power [87] Utilizes three coordinated PEV -wind energy dispatching methods in the V2G context (variable -rate energy dispatching, interruptible, and valley searching) to encourage user demand response by optimizing the utilization efficiency of wind power generation and meet dynamic power demands.These approaches are addressed in a stochastic framework, considering the uncertainties.A comparative study involves numerical simulation experiments that cover adequate system scenarios using scenario generation and reduction techniques.
Electricity Price [19] Scenario trees are used to generate the scenarios for electricity price uncertainty.
Power trading is included in the stochastic UC model.Fuel constraints and prices are considered in the model that may change with electricity prices and demand.Lagrangian relaxation and Bender's decomposition are applied in the MILP model.

Electricity Price Wind, Solar, and Demand [81]
A scenario-based technique is used in modelling the uncertainties of PV and WT output power, demand forecast errors, and grid bid changes for the optimal energy management of microgrid.
MBA is used to optimize the energy management of the grid-connected microgrid with large uncertainties.

Uncertainty Model Ref. Remarks
Electricity Price (Investment) Load Growth [83] The day-ahead reserve and energy markets, and real time operation are implemented using a proposed two -stage SP.Scenario tree is used to generate the investment and load growth model.

Electricity Price
Wind Power [103] Scenario generation (Roulette Wheel) is used to model uncertainty.
The initial scenarios are reduced using SCENRED.
A multi -objective offering strategy is proposed.
Electricity Price Renewable Energy [113] An innovative formulation for UBFUCC DRRs is suggested.
The price -elasticity of electrical consumption is modeled, as an uncertain, unavailable, and hard -to -estimate parameter using Z numbers in a possibilistic -probabilistic method.Supply-side resource uncertainty is considered using MCS.

Electricity Price
Load GrowthPEV [120] MCS is used to model uncertainty.
Outages of Generation Units [20] Random disturbances are modeled using scenario trees.
The failure probability law used is binomial.The use of an augmented Lagrangian technique provides the decomposition algorithm with satisfactory convergence properties.
Outages of Generation Units Demand Electricity Price [21] Scenario generation is used to model the uncertainty.

Outages of Generation Units and Transmission Lines
Demand [48] Uncertainty modeled using scenario trees via MCS.The scenario aggregation method and scenario reduction are used to reduce computation time.
Outages of Generation Units Demand [56] Compares the reserve and stochastic approach and evaluates the benefits of a combined method for the efficient management of uncertainty in the unit commitment problem.Two-state Markov process is implemented in modeling the state of generation resources.Uncertainty in the demand is handled by the addition of the stochastic forecast error.

Outages of Generation Units Demand and
Wind Power [60] Load is modeled using a normal distribution function.
The 2 -state capacity model is used to represent generator availability.
ARMA is used to model wind speed variations.
Outages of Generation Units Wind, PV, and Demand [67] The uncertainties due to generator outages, PV, wind, and demand forecast errors are incorporated into the proposed optimization problem using EUE and LOLP reliability indices.

Probabilistic Methods
A PDF is identified for each random input parameter.Numerical and analytical methods are the commonly known category of probabilistic approaches or uncertainty modeling methods.

Numerical Methods
Numerical methods are mathematical tools used to find the uncertain input parameter.The main drawback of this method, also known as the conventional or purely mathematical method, is its high dimensionality and computing time.The following subsection will discuss MCS and MCMCS.

Monte Carlo Simulation
The MCS is applied to develop the probabilities of several outcomes of a process that cannot easily be predicted owing to the involvement of random variables.This is used to understand the impact of uncertainty and risk in forecasting and prediction models.Table 8 lists studies in which the MCS method was used and the uncertain parameters that were modeled in them.Most studies that use this method focus on renewable energy and demand as sources of uncertainty for the power grid.

Markov Chain MCS
MCMCS is a dynamic variation of the MCS method that is utilized to manage the uncertainty of parameters of a system.In this method, MCMCS is used to generate the samples based on the probability distribution, in which the probability of creating a unique state in the chain is based only on the present state.
In the MCMCS implementation, the probability of change is defined using the Metropolis method, which states that transition probability from state m to m, is q(m, m) while the probability of the accepted state is α(m, m) [1].
Table 9 presents studies in which the MCMS method has been used and the uncertain parameters that are modeled in them.

Ref.
Uncertainty Model [46] Outages of Generation Units and Transmission Lines [56] Outages of Generation Units [60] Outages of Generation Units

Analytic Methods
Different analytical methods (scenario -based and PDF approximation) are established for calculation with PDFs of uncertain input parameters.

Scenario-Based Method
The scenario -based method is a simple and efficient method for developing probabilistic uncertainties in which the continuous space of an uncertain function is converted into discrete scenarios with subsequent probabilities, and the PDF curve is divided into subregions [1].Each region denotes a scenario that has a particular probability.Suppose that the divided regions have k = 1,2, 3 . . ., N and their subsequent probabilities are p 1 , p 2 , p 3 , . . ., p N .The expected output value is given by, The scenario-based method approximates and provides the expected values of the output functions.
Table 10 lists studies in which a scenario -based method is used, and the associated uncertain parameters.Scenario Trees are most used in the scenario-based method.Other methods include the WILMAR model, the PEM, GP regression, and the Roulette Wheel.

PDF Approximation
Approximate methods provide a simple description of the uncertain parameters by random variables.The main advantage of these methods is the use of deterministic routines for solving the UCP.In addition, approximate methods are computationally more efficient than other probabilistic methods.
Table 11 presents studies in which the PDF approximation method was used, the uncertain parameters modeled, and the type of technique considered.This method has been mostly applied to uncertainties with demand and renewable energy.

Chance Constrained Programming
The core idea of conventional CCP is to permit constraint violation.The probability violation must be smaller than a predefined risk level (confidence interval).A general form of a chance constraint is as follows.[40] Pr{f The symbol "Pr{•}" indicates the value of a probability.CCP is regarded as solving a stochastic problem with some probabilistic constraints, such that certain constraints that are related to some uncertain parameters are fulfilled with a given probability.
Table 12 presents different studies in which CCP is used and the uncertain parameters modeled.A significant number of studies uses CCP to deal with uncertainties that are generated by wind power and demand.

Uncertainty Model
Ref.

Remarks
Wind Power [9] This paper suggests an expected value and chance constrained stochastic optimization approach to solve the UCP with uncertain wind power output.The model utilizes the wind power generation by varying the utilization rate in the proposed expected value constraint.
In the model, the utilization of wind power can be adjusted by changing the utilization rate in the proposed expected value constraint.The chance constraint is imposed to inhibit the probability of load imbalance.
The expected value and chance constraint, and the objective function are transformed using SAA.
Wind Power [14] The problem is formulated as CCTS stochastic program.The two-stage stochastic and chance -constrained stochastic program features were included in the given model.The model is effectively solve using a combined SAA algorithm.

Wind Power [40]
A novel CCGP model was proposed to optimize the risk adjustable UCP.
A tractable MILP resulted to the transformation of the proposed model using a deterministic equivalent and piecewise linearization.

Uncertainty Model Ref. Remarks
Wind Power [45] MILP -based chance -constrained optimization model is proposed to establish efficiently the optimal wind power output ranges, which are quantified using maximum and minimum wind generation levels in a certain time interval.The developed wind power range is then used to create dynamic uncertainty intervals for the robust SCUC model.
Wind Power [99] Transforms the conventional UC model into a chance -constrained stochastic problem to satisfy the optimal schedule objective.The non -convex problem is solved by introducing the PSO algorithm and BB technique; PSO is initialized using simplex algorithms.

Wind Power [108]
A novel method for solving GRCC -RTD with wind power uncertainty is proposed.

Wind Power Demand [64]
A new approach for reserve scheduling and joint energy and reserve scheduling and unit commitment under reliability constraints for the day -ahead market is provided.
The proposed method includes a novel n-K criterion under which load must be satisfied with a specified probability under any instantaneous loss of K generating units.A chance -constrained method is proposed with an α-quantile measure to determine the confidence level, where demand is met under K simultaneous contingencies.The chance -constrained optimization problem CCP is recast as a MILP optimization problem.
Wind Power Demand [79] The UCP is devised as a chance -constrained two -stage stochastic programming problem where the chance constraint is applied to limit the probability of load imbalance.
Presents the bilinear mixed -integer formulation of the chance constraint, and then derives its linear equivalent using the McCormick linearization method.Develops a bilinear variant of Benders' decomposition method, which is an easy-to-implement algorithm, to answer the resulting large -scale linear equivalent.
Wind Power Electricity Price [13] An optimal bidding strategy for independent power producers in a deregulated electricity market is proposed.The problem is devised as a two -stage stochastic price -based UCP with chance constraints to ensure wind power operation.The 1st stage decision includes unit commitment and the amount of electricity submitted to the day-ahead market.The 2nd stage outcome includes actual usage of wind power, generation dispatch, and energy imbalance among the day -ahead and real -time markets.The chance constraint is utilized to guarantee a specific percentage of wind power operation to satisfy renewable energy utilization regulations.SAA is applied to solve the problem.
Renewable Energy [52] The problem is devised as a chance -constrained two -stage stochastic programming model.Three different policies are used to guarantee that the utilization of renewable energy is high in microgrid operations.The 1st policy imposes a specific percentage of renewable energy utilization for the full interval while the 2nd and 3rd policies impose renewable energy utilization for certain hours and all operating hours, respectively.A combined SAA algorithm is used in solving the proposed model.

Uncertainty Model Ref. Remarks
Renewable Energy [110] The method uses CCP to manage uncertainties in power that are generated by renewable resources.The design variables are the PV panel area, the number of batteries, and the rotor's swept area.
Renewable Energy Demand [107] The total storage power and energy constraints are presented as chance constraints, for which conservative convex approximations are used for tractability.
Fluctuation [65] Formulates a stochastic optimization program with chance constraints that determine the probability of fulfilling the transmission capacity constraints on generation and the lines limits.
The steady -state behavior of the secondary frequency controller is considered to incorporate a reserve decision scheme.Deployed reserves are taken as linear function of the total generation-load mismatch.They are proposed for tractability.
A scenario -based approach and an approach that considers only the quantiles of the stationary distribution of the wind power error are used in dealing the chance constraint.

Electricity Price [85]
A new electricity market -clearing structure based on LMPs is provided for assessing the uncertain generation and load.U -LMP is developed from a distributionally robust chance -constrained optimal power flow model where only the 1st order and 2nd order moments of the uncertain sources' probability distribution are required.

PEV Wind Power
Demand [106] Uses a fuzzy CCP that considers wind power forecasting errors.
The demand response and PEVs may change the demand curve to solve the mismatch problem.

PEV Wind Power PV Power [122]
A new method is introduced to manage uncertainties (Wind, PV, and PEVs) in the optimal sizing of DGs.
A mathematical model of CCP is created with the minimization of the DGs' maintenance cost, network loss cost, capacity adequacy cost, operating cost, and the investment cost as the objective function, security limitations as constraints, and the sizing and siting of DGs as optimization variables.
An MCS -embedded genetic -algorithm -based method is used in solving the developed CCP model.

Robust Optimization
RO methods are commonly used for uncertainty management in power systems.For instance, RO methods are used to solve the optimization problem with the worst scenario concerning the uncertain parameters.
Table 13 lists studies in which robust optimization is used and how this method is implemented for uncertain parameters.Different studies consider the uncertainty set to have fixed limits [15][16][17][18]22], while others model it as a flexible one [25,27,31].MCS [17,94], PSO [82], and historical data [15,22,29,114,115] are commonly used to generate the uncertainty set for the reviewed studies.

Ref.
Method Implementation Remarks [15] The random wind power output is model with an uncertainty set.The assumed uncertain wind power output is within a given lower and upper limit.
The lower and upper limit can be found based on an interval forecast or historical data.
Proposes an RO approach to accommodate wind output uncertainty, and, to provide an RUC schedule for the thermal generators in the day-ahead market that minimizes the total cost in the worst wind power output scenario.
RO is used to model the randomness using an uncertainty set that includes the worst-case scenario and keeps this scenario under the minimal increment of costs.
[16] The uncertain wind power output is based on the uncertainty set with limit set at 0.95 and 0.05 quantiles.The demand response uncertainty set can be formulated using the price -elastic demand curve.
A multi-stage robust MIP problem.
An exact solution that uses Benders' decomposition is developed to obtain the optimal robust unit commitment schedule for the given problem.
[17] In generating the uncertainty set for the robust optimization part, the assumed demand at each time in each bus is between an upper and a lower bound, which can be set as the 5th and 95th percentiles of random demand.
A novel unified robust and stochastic UC model can attain a low expected total cost while ensuring system robustness.Introduces weights of the components for the robust and stochastic parts in the objective function, SO can adjust the weights according to preferences.The model is solved using Benders' decomposition algorithm.
For the stochastic part, MCS is performed to generate scenarios for load uncertainty (stochastic part).
[18] The uncertainty model in an RO formulation is not a probability distribution, but rather a deterministic set.In this paper, the uncertain parameter is the nodal net injection.Proposes a two -stage adaptive RUC model for the SCUCP with nodal net injection uncertainty.The proposed model is more practical compared to other models since it requires only a deterministic uncertainty set rather than a hard -to -obtain probability distribution of uncertain parameters.Develops a practical solution method using a combination of Benders' decomposition and the outer approximation technique.
[22] The uncertain wind power injections are assumed to be changeable within a polyhedron.This polyhedron is specified by the deterministic confidence bounds for each uncertain variable over the time horizon, which can be computed using statistical inference techniques based on historical data.An RUC model is proposed for hybrid AC/DC transmission grids.Full decomposition of network feasibility evaluation improves scalability.Nonanticipativity is maintained using robust generator-wise reserve margins.Improves hosting capacity and loadability for RES. [25] The operation risk of load shedding and RE curtailment is reduced through the participation of DR when the RE falls out of the adjustable uncertainty set.The uncertainty of RE in UC is dealt by the proposed adjustable uncertainty set.DR is co-optimized to reduce the operational risk of RE curtailment and load shedding.
[26] Linear decision rules are used as an effective estimate to solve the multistage robust model, where decision variables are assumed to depend linearly on uncertain parameters.Implements a rolling look-ahead UC scheme in a joint PDN and DHN to exploit the operational flexibility of rapid -response CHP units under substantially variable RES power output.The scheme is formulated as a multistage distributionally robust commitment model that the non-anticipativity of decision variables for sequential revelations of uncertainties.
[27] The uncertainty set in the proposed model is relevant and variable to the availability of system flexible resources.
The position and scale of the variable uncertainty set depend on the flexible reserve capacity and the system operation state.Proposes a flexible robust risk-constrained UC formulation where energy storage is allocated to cope with the uncertainty of wind power.
The model creates an adjustable and flexible uncertainty set.The model balances the operational risk and the operational costs.The data -driven RUC protects against the convex hull of realistic scenarios empirically capturing the time -varying and complex intra -day spatial and temporal interdependencies between renewable units. [31] The formation of the partition -combine uncertainty set can be separated into three steps.First, the box set surrounding all the historical data is divided into subsets.Second, the subsets with new developed boundaries are combined to reformulate the new uncertainty set.Third, the inner subsets are found to reduce the scale of uncertainty variables.RUC is conducted using the partition -combine -method to create the minimal uncertainty set with erratically distributed historical data.
[32] The wind power system is assumed to receive no dispatch signals and generate unlimited power, whereas other energy systems are considered dispatchable.
The uncertainty set contains three scenarios for wind power output.(predicted, error and extreme) An RUC model for multiple energy sources based on the optimal uncertainty set is proposed.
The RUC model is used to elucidate the effect of wind power fluctuations on power system scheduling.
[35] The 1st and 2nd order moments of stochastic parameters can be assumed from historical data, and then employed to model the set of probability distributions.
The resulting problem is a two -stage distributional RUC with 2nd order moment constraints, and it can be recast as MI -SDP with finite constraints.
The UC problem considering uncertainties of RES is examined using a distributionally robust optimization approach.The solution algorithm of the problem solves a series of relaxed MI-SDPs and includes a subroutine of vertex generation and feasibility checking. [36] In the 1st stage, the energy, reserves and commitment of generators are pre -scheduled to minimize the operational cost, responding to the line failure scenario and worst load forecasting in a day of operations.The 2nd stage constraint set includes the scheduling of generators, power flow, load shedding, generation curtailment after the realization of load forecasting errors and transmission line operating status.
A resilient UC problem is created as a two-stage DR&RO problem.
The formulated DR&RO problem is resolved using the columnand -constraint generation scheme and hybrid Benders' decomposition.
[37] Zonal disaster -specific uncertainty sets are used to capture the dynamic behaviors of windstorms.
The unavailability uncertainties of N-K contingencies, as well as the forecast uncertainties of wind power, PV power, and demand are considered.
A robust -resilient operational schedule for active distribution networks against windstorms is proposed.Instead of committing microturbines and ESS in the 1st stage (hereand -now) of the decision-making process, the proposed model considers related commitment decisions in the 2nd stage (waitand -see) of the decision -making process.This approach is more reliable with the short response time of these units.
A new solution that is based on LS and BCD techniques is suggested to solve the bi -level problem.

Ref. Method Implementation Remarks [38]
A data -driven, distance -based ambiguity set can be constructed to capture the uncertainty of wind power distribution.
Develops DDRC UC model.The two -stage UC model aims on the commitment decision and dispatch plan in the 1st stage and considers the worst -case expected cost for a possible power imbalance or re -dispatch in the 2nd stage.
[59] The upper -level agent (the SO) determines the schedule of reserves and power so that the overall cost is minimized.This cost minimization problem is subjected to the worst -case contingency in each period and is modeled by the lower -level optimization.
The lower -level determines the combination of out -of -service generators so that the available post -contingency power output in each period is minimized.
A new approach for solving contingency -constrained single -bus UCP is presented The proposed model explicitly incorporates an n-K security criterion by which the power balance is guaranteed under any contingency state that involves the simultaneous loss of up to K generation units.The resulting model is a particular instance of bilevel programming and is solved by transforming it into an equivalent single -level MIP problem.
[82] Different wind penetration levels are generated using PSO.
A PSO -based scenario reduction and generation algorithm is used to model uncertain parameters.The stochastic UCP is solved using a new parameter -free selfadaptive PSO algorithm.
[85] The 1st and 2nd order moments of the forecast errors for demand and wind power generation are needed, which are obtained from historical data instead of the predefined uncertainty sets.The transmission power flow limits and generation output constraints are developed as chance constraints in which a flexible coefficient uses the robustness of the chance constraints to the forecast errors.
The LMP uncertainty components for the transmission overloading and the generation violations are derived from the Lagrangian function.These uncertainty components in the LMP represent the marginal contribution of the uncertainty in variable sources such as demand and wind power on the system cost.
A new electricity market -clearing mechanism that is based on LMPs is provided for pricing uncertain demand and generation.U -LMP is developed from a distributionally robust chanceconstrained optimal power flow model in which only the 1st order and 2nd order moments of the uncertain sources' probability distribution are required.
[93] Implementation and development of two algorithms within a two -level framework.The 1st stage decision variables should be made day-ahead while the 2nd stage decision variables should be made after wind power uncertainty is shown.A two -stage robust UC model yields day-ahead generator schedules; wind uncertainty is captured by a polytropic uncertainty set.Includes a DR strategy such that both generator schedules and price levels are obtained for the following day.
[94] Feasibility and optimality cuts in Bender's decomposition are considered.MCS is used to find the lower bound and upper bound of the wind power forecast.Introduces an innovative min -max regret UC model to minimize the maximum regret of the day -ahead decision scheduling from the actual realization of the uncertain wind power generation.Benders' decomposition is developed to solve the problem.
[108] Wind power forecast errors follow a normal distribution, and their first and second -order moments are allowed to change within predetermined regions.A novel solution method of GRCC -RTD, considering wind power uncertainty, is proposed.

Ref. Method Implementation Remarks
[114] The robustness of the PHEV transition model is examined with respect to perturbations in electricity prices.
The performance of the robust solution as a function of the protection level for an emission cost/credit.Data uncertainty from both electricity grid and transport sector are considered (54 parameters).
The method is based on comprehensive RO planning that considers the constraints associated with both the transport sector and the electricity grid.[115] Offering curves are done based on price-taker producer.The effectiveness of these curves aim to achieve high profit.
Electricity prices are obtained using ARIMA method.Provides a technique for building hourly offering curves for a price -taking producer that participates in a pool.The technique relies on solving a sequence of robust MILP problems.Price confidence intervals are considered.

Risk-Based Optimization
Risk-based optimization is based on the definition of risk measures and associated optimization problem formulation that accounts for the risk induced in system-level outputs by uncertain parameters.
Table 14 presents studies in which risk-based optimization is used, and the risk considered.Risk-based optimization is performed by adding a penalty term in the objective function [10,98], or by including the risk to constraints in the UCP [28,84], or by doing both [39,49,50,77].Additional constraints are defined in [77,84] while others integrate the risk in the energy balance [98] and reserve constraint [28,49,50].Wind power [10,28,39,49,98], demand [10,50,84], and failure of units [28,49,77] are considered as uncertain parameters in the risk-based optimization.The risks are expressed in using the probabilistic distributions of the wind power generation forecast that are found in the objective function and the constraints.
The RUC model is shown to be convex and is transformed into a MILP problem using relaxation and piecewise linearization.
[28] The PDF of the residual demand can be obtained by the convolution of the PDFs of the demand and the post curtailment wind generation.The residual demand is considered as the operating risk and is integrated in the reserve constraints.N-1 security stochastic criterion is also considered in the reserve constraints.
A new bi -objective PRCBUC model is developed to simultaneously minimize the risks and operational costs.The novel formulation of PRCBUC offers a new power redispatch procedure to comply with the up -and -down ramp rate constraints.
A new operational -cycles -based UC algorithm is developed.The approach uses a new nondominated sorting backtracking search optimization algorithm for extracting the Pareto-optimal set.Table 14.Cont.[39] CVaR is adopted to specify the risk loss when the wind power output falls outside the predefined uncertainty set.CVaR is defined as wind spillage and load shedding cost and integrated in the objective function.

Ref. Risk Considered Remarks
A risk -based two -stage RUC model is developed to analyze the admissibility of wind power generation.
ESS is utilized to manage wind power uncertainty and reduce the risk of loss.
[49] Cost of the down -spinning reserve is the penalty cost due to wind power (unavailability) and demand uncertainty (overestimating).
Cost of the up -spinning reserve is the penalty cost due to wind power uncertainty (overestimating) and generation outage.
The risk constraint of load shedding is based on the up -spinning reserve.
The risk constraint of wind energy waste is based on the down -spinning reserve.N-1 condition is also considered in terms of the total up and down -spinning reserve.
A modified ED optimization model with wind power penetration is developed.Underestimation and overestimation of the available wind power are offset by using up and down -spinning reserves.Risk-based up and down -spinning reserve constraints are presented considering not only the uncertainty of available wind power generation but also the load forecast error and generator outage rates.
The predictor -corrector primal -dual interior -point (IP) method is applied to solve the ED model. [50] The reserve capacity constraint integrates the demand uncertain parameter in terms of RMSE.
The RMSE considers the line flow and power/required reserve.The negative and positive reserve capacities are integrated into the objective function as the penalty cost.
A risk-based approach is presented to find the stochastic solution of NCUC when additional uncertainties are incorporated into the power system scheduling.
The NCUC problem is formulated as a single -stage -2nd order cone program which is a convex algorithm.
The proposed method provides efficient solutions to largescale stochastic problems and aids to accommodate DER variabilities in economic and secure operations of power systems.
[77] The UC risk considers the failure of generators, failure of lines, and risk of responsive demand.
The UC risk is defined as a penalty cost in the objective function.
The Day-Ahead Demand Response Program is implemented as an incentive -based in providing the spinning reserve.
A certain number of demands are selected based on a sensitivity analysis and simulated as a virtual generation unit.The reserve market is cleared for spinning reserve allocation using a probabilistic technique.
A comparison is made concerning economics and reliability between the absence and use of a Day -Ahead Demand Response Program.
[84] A reliability constraint is accommodated directly in terms of the power balance between supply and demand.RLD is a new framework that integrates complex inputs and allows decision-makers to balance tradeoffs and quantify benefits that arise from increased flexibility and improved forecasting.

Hierarchical Scheduling Strategy
A hierarchical scheduling strategy is the process of scheduling components or entities according to rank of importance.In a UCP, it can be carried out concerning committed generation units or reserve allocation [23,24,88].
Table 15 presents studies in which the hierarchical scheduling strategy is used and how this method is implemented for uncertain parameters modeling.Power trading is implemented in [23] to manage the uncertainty of renewable energy and demand.In this study, the penalty cost of power trading between microgrids is implemented through the hierarchical approach considering the least cost.In [24], the author emphasize that the tie-line schedule is solved first before considering the generation schedule when a power interchange occurs during load uncertainty.Lastly, in [88], the study implements a hierarchical scheduling strategy considering generation reserve, ramping reserve, and transmission reserve.This method is implemented in the UCP using the energy balance constraint and penalty cost function.

Ref.
Method Implementation Remarks [23] ATC method is used to minimize the penalty cost of power trading from different microgrids due to uncertainty of demand and renewable energy (PV and WP).Solves the optimal operation problem for IMS in a market environment with uncertainty.Establishes a hierarchical distributed framework for cloudedge coordination.
Proposes a bi -level distributed optimization model with a fair price mechanism.ATC and augment Lagrange method are integrated.The diagonal quadratic approximation is used to yield a parallel solution. [24] The hierarchical solution method considers net load uncertainties for several interconnected power systems.An initial tie -line schedule and generation schedule for each area is derived.When a power interchange occurs, the tie -line schedule becomes the upperlevel problem followed by the generation schedule as the lower -level problem.The problem is devised as a multi-area robust SCUC model, with a novel uncertainty set that is specified in terms of the variance of the system netload.A modified outer approximation algorithm is developed to obtain a higher quality solution using bilinear programming.

Ref. Method Implementation Remarks
[88] The hierarchical scheduling strategy considers both traditional and emergency operations.
The strategy separates the wind power output into two intervals based on confidence levels and applies various scheduling strategies in different intervals of wind power output.HUC model is presented to keep system security by scheduling power system reserves with high penetration of wind power generation.
The reserves in the HUC model include the generation reserve, transmission reserve, and ramping reserve.

Information Gap Decision Theory (IGDT)
IGDT identifies the extent to which an uncertain parameter can function while ensuring that the minimum income is received by the decision -maker.Its two essential features are robustness and opportuneness.A detailed review of this approach can be found in the paper by Majidi et al. [133].
Table 16 presents the studies in which the IGDT method is used and how this method is implemented for uncertain parameters.The studies discussed in Table 16 consider a robust function wherein the uncertainty level is maximum when the function is maximized.The IGDT may be applied to the UCP by adding a penalty cost to the objective function; the IGDT's robust function is integrated into the energy balance constraint.

Ref.
Method Implementation Remarks [70] IGDT is implemented modeling the load demand and wind power generation uncertainty by envelope bound method.The uncertainty level is maximum when the robust function is maximized.The robust function is subjected to the energy balance constraint wherein the minimum wind power level and highest demand level are considered.
Presents a new framework, using IGDT, for the multiobjective robust SCUC of generating units that are connected to gridable vehicles and wind farms.
A bi -objective model is used in considering the uncertainties cause by demand and wind power.Normal boundary intersection technique is used to solve the problem.
[80] IGDT is implemented by maximizing the uncertainty horizon of demand.The model is subjected to the energy balance constraint wherein the highest load level is considered.Proposes a robust framework using IGDT for the SCUC of generating units and lithium -ion BESS.The cost of the degradation of the BESS is considered in the objective function as an element that strongly influences the BESS operation.The framework is independent of PDFs or the membership of sets and allows the SO to modify the operating strategy (between over -conservative and reckless) against the demand uncertainty.The day -ahead scheduling problem is modeled as SCUC using MILP.

Discussion of Reviewed Methods
A comprehensive review of the different studies and the method implementation were discussed in Sections 4.4-4.7.These include SP, probabilistic methods, CCP, RO, risk-based optimization, hierarchical scheduling strategy, and IGDT.SP is a method that optimizes the expected outcome on a risk-neutral perspective using a probability distribution.Commonly used PDFs are Gaussian, Rayleigh, Weibull, and Beta Distribution.In most cases, this method is transformed into a deterministic approach making it much simpler and easily implemented.Renewable energy and demand uncertainty are the most common areas of study that implement this method.The PDF can be formulated using historical data, forecasted data, or simulation results.Aside from using a given PDF, other ways of generating input are numerical and analytic methods which fall under the second discussed method which is the probabilistic method.This method together with SP has been applied by many studies involving outages, demand, and renewable uncertainty.Unfortunately, using these two methods may lead to an infeasible solution due to the constraint violation.In this case, the use of IGDT and CCP methods can be applied.These two methods can relax constraint violations by augmenting a penalty factor when these violations are relaxed.
CCP is an approach wherein a constraint violation is allowed.When these constraints are violated, a penalty cost is introduced on the UCP.Commonly used penalty costs are related to the load shedding and wind spillage of renewable energy spillage.Like the SP and probabilistic methods, the expected outcome can be compared over a known PDF or interval.Unfortunately, CCP does not consider the given interval or known PDF, resulting in a limitation of its flexibility and robustness.IGDT, on the other hand, like the CCP, allows constraint violations.The difference is that a robust function is implemented in IGDT.In this method, the framework is independent of the PDF or membership set and it allows the SO to vary the operating strategy easily.
The risk-based method, unlike the SP, optimizes the UCP using a risk-level approach.Most of the studies that applied this method involve the wind power and demand uncertainty.Unlike the SP, the reserve allocation in the UCP is fixed and cannot be adjusted; the risk-based optimization allows violations on constraints at a given risk level.Some risk-based methods consider the penalty cost while others just integrate it in the energy balance constraint or in the reserve constraint.
The other two methods discussed in Section 4 are the hierarchical scheduling strategy and RO.The hierarchical scheduling strategy is, unlike SP, CCP, and IGDT, a hierarchical process which is implemented to mitigate the effect of uncertainty.Reserve allocation is the common application of this method.RO solves the UCP by considering the worst-case scenario which may not be considered by the previous methods.
Lastly, since more uncertainty parameters in the UCP can be considered, it results in more data and variables to be considered.Different methods may be integrated together to increase computational efficiency.

Evaluation of Constraints, Test System, and Simulation Tools of Different Studies
Table 17 gives an outline of studies on the UCP that consider uncertainty.The constraints that are applied in the problem, along with the test system and the applied simulation tools, are shown in each scenario.
A variety of constraints are identified in the studies and the demand balance and constraints on thermal units are mentioned in most of them.
The studied systems range from simple systems to IEEE bus systems and sometimes real-life grids with periods of 4, 24, 168, and 8760 h.Most of the studies involve the IEEE test system for 24 h.
CPLEX and GUROBI have been the most used solvers to be implemented using C, C++, Python, MATLAB, and GAMS.In most of the studies, MATLAB and GAMS have been used for simulation owing to their availability and ease of use.

General Notes on Reviewed Methods
Section 6 discusses some important issues regarding the reviewed methods.Table 18 summarizes all the reviewed studies in this paper in terms of method, solver, hardware specification, run -time, and simulation results.Based on Table 18, the following information can be summarized: 1.
As the system size increases, the corresponding run -time also increases.

2.
As more constraints are included in the UCP, the solution steps require a longer run time.

3.
The modeling of uncertainty parameters affects the UCP result.4.
The CPLEX solver can be applied to any method.

5.
The Gurobi solver is used on some methods where uncertainty can be adjusted; they include CCP, risk-based optimization and RO. 6.
Advanced computing tools result in short run time regardless of methods applied.7.
SP has been used in the majority of the studies due to the short run -time.The drawback is it may result in a sub-optimal result or infeasible solution due to its limitation.SP combined with other methods will optimize the solution but increase the run time.This has been the commonly used strategy due to the advancement of computing tools.8.
RO has become of interest to a lot of researchers since it can handle more constraints compared to other methods.The only drawback to this method is its run -time, but this has already been solved due to more advanced computing tools.

Conclusions
Uncertainty management in a UCP is crucial in the operations, control, and monitoring of power systems.It has attracted considerable attention since it influences the cost of the operation and maintenance of power grids.Considering the significance of this topic, this paper reviews a significant number of studies in this area.
The review identifies various types of uncertainty parameters and identifies how each is modeled.These types are technical, economic, and "epidemics, pandemics, and disasters".The latter category is found to be of great importance because this type cannot be modeled as simply as the first two types because it affects not only the techno-economic aspect of the energy sector but also the social aspect and thus, may lead to future studies.This review examines various methods for uncertainty management and describes key concepts and innovations.The management of uncertainties related to renewable energy has seen an increase in studies conducted in recent years.These uncertainties arise from sustainable grid reconstruction and evolving environmental policies.In addition, the management of uncertainties related to electricity prices and demand continue to be of great importance today.These uncertainties arise from market liberalization and the increase in world population.
Computing tools such as GAMS and MATLAB are identified as the most used software tools, along with CPLEX or GUROBI solvers.For the studied system, IEEE test systems using 24-h intervals are easily implemented owing to data availability and their ease of use.A realistic test system (real power grid) should also be considered in conducting the uncertainty management of a UCP.Robust optimization has recently become a method of interest due to the availability of highly advanced computing tools.Lastly, this review shows how different studies propose policies or strategies in improving the control and operation for power systems.These strategies include the hierarchical scheduling of reserve, penalty cost for RE spillage and load shedding, and proper management of thermal units and ESS.Voltage of bus q in period t X t i ON/OFF status of generator i in period t

Table 2 .
Studies Concerning Uncertainty Parameters in Unit Commitment Problem.

Table 3 .
Various Reliability Indices in Power System.

Table 4
presents commonly used models.

Table 4 .
Models for Determining Wind Energy Output.

Table 5 .
Models for Determining PV Power Output.

Table 7 .
Studies that Use Stochastic Programming.

Table 8 .
Studies In Which MCS Is Used.

Table 9 .
Studies In Which MCMS Is Used.

Table 10 .
Studies In Which Scenario-based Is Used.

Table 11 .
Studies In Which PDF Approximation Is Used.

Table 12 .
Studies In Which CCP Is Used.

Table 13 .
Studies In Which Robust Optimization Method Is Used.

Table 14 .
Studies In Which Risk-Based Optimization Is Used.

Table 15 .
Studies In Which The Hierarchical Scheduling Strategy Is Used.

Table 16 .
Studies In Which IGDT Method Is Used.

Table 17 .
Methods For UCP With Uncertainty Management.

Table 18 .
Summaries Regarding Methods, Hardware Specification, Run -time And Simulation Results.
Certain radiation point (150 W/m 2 ) α i , β i , γ i , ξ i , and λ i Emission coefficients for generator i θ pq Voltage angle difference between buses p and q α Scale parameter for the PDF of the Weibull function β Shape parameter for the PDF of the Weibull function β T PV temperature coefficient ξ Error of the function f i (x)