Biotests and Biosensors for Ecotoxicology of Metal Oxide Nanoparticles: A Minireview

Nanotechnologies have become a significant priority worldwide. Several manufactured nanoparticles - particles with one dimension less than 100 nm - are increasingly used in consumer products. At nanosize range, the properties of materials differ substantially from bulk materials of the same composition, mostly due to the increased specific surface area and reactivity, which may lead to increased bioavailability and toxicity. Thus, for the assessment of sustainability of nanotechnologies, hazards of manufactured nanoparticles have to be studied. Despite all the above mentioned, the data on the potential environmental effects of nanoparticles are rare. This mini-review is summarizing the emerging information on different aspects of ecotoxicological hazard of metal oxide nanoparticles, focusing on TiO2, ZnO and CuO. Various biotests that have been successfully used for evaluation of ecotoxic properties of pollutants to invertebrates, algae and bacteria and now increasingly applied for evaluation of hazard of nanoparticles at different levels of the aquatic food-web are discussed. Knowing the benefits and potential drawbacks of these systems, a suite of tests for evaluation of environmental hazard of nanoparticles is proposed. Special attention is paid to the influence of particle solubility and to recombinant metal-sensing bacteria as powerful tools for quantification of metal bioavailability. Using recombinant metal-specific bacterial biosensors and multitrophic ecotoxicity assays in tandem will create new scientific knowledge on the respective role of ionic species and of particles in toxicity of metal oxide nanoparticles.


Introduction
It is remarkable that although environmental research and protection efforts as well as health-related investments are constantly increasing, the current world witnesses the significant increase of neurodegenerative and cardiovascular diseases, allergies, cancers and also a clear trend towards drastic deterioration of natural ecosystems. That was the main reason of the introduction of the E.U.'s new REACH (Registration, Evaluation and Authorizations of Chemicals) chemical policy [1]. Presently, the current chemical regulations (including REACH) fail to address the environmental, health, and safety risks posed by nanomaterials/particles but given the urgent need for the evaluation of their biological effects, this is actively debated, also at the E.U. level [2]. Nanotechnologies have become a significant priority in many countries. Nanoparticles are defined as natural or manufactured particles with one dimension less than 100 nm. Some natural particles are of nano-scale such as colloidal humus [3,4] and ultrafine particles in atmospheric emissions [5]. Environmental nanoparticles are commonly formed as either weathering byproducts of minerals, as biogenic products of microbial activity, or as growth nuclei in super-saturated fluids [6]. Manufactured nanoparticles can be inorganic like nanopowders of metal oxides and metal salts like CdS (quantum dots) or organic chemicals and polymers like dendrimers [7].
According to "The Nanotechnology Consumer Products Inventory" [8] the most common material mentioned in the product descriptions was carbon (29 products) which included fullerenes and nanotubes. Silver was the second most referenced (25 products), followed by silica (14), titanium dioxide (8), zinc oxide (8), and cerium oxide (1). Among potential environmental applications of nanoparticles, remediation of contaminated groundwater with nanoscale iron is one of the most prominent examples [9,10]. Regarding personal-care products, nanoparticles of titanium dioxide and zinc oxide are included in toothpaste, beauty products, sunscreens [11] and textiles [12]. Metal oxide-based nanomaterials and/or nanoparticles are also increasingly used in fillers, opacifiers, ceramics, coatings, catalysts, semiconductors, microelectronics, prosthetic implants and drug carriers [7,13]. Photocatalytic properties of TiO 2 may be used for solar-driven self-cleaning coatings [14] and for biocidal/antiproliferative applications [15]. Copper oxide nanoparticles have potential to replace noble metal catalysts for carbon monoxide oxidation [16] and CuO nanoparticle suspension (nanofluid) has excellent thermal conductivity for it to be used as a heat transfer fluid in machine tools [17].
In the form of manufacturing and household waste the metal oxide nanoparticles are likely to end up in natural water bodies. For perspective on potential "nanopollution", one may consider that 2 g of 100 nm size nanoparticles contains enough material to provide every human worldwide with 300,000 particles each [18]. Decrease in particle size changes the physicochemical and structural properties of particles and in the case of nanoparticles that is responsible for increased bioavailability and toxic effects
As an example, Oberdörster et al. [19] showed that exposure to fullerenes (C 60 ) caused oxidative damage in the brain of fish. Despite that, nanosized materials were till recently treated as variations of the technical material or existing formulation and thus not requiring separate registration [21]. Due to the current commercial development of nanotechnology, the occupational and public exposure to nanoparticles is supposed to increase dramatically in the coming years as well as their potential release in the environment. Thus, the studies on safety and (eco)toxicity of nanoparticles are of extreme importance in order to support the sustainable development of nanotechnology.
Despite of the rapid increase of nanotoxicological peer-reviewed papers published, most of the data has been obtained on limited types of particles and mostly on in vitro cell cultures or in vivo respiratory exposures on rodents [22]. The knowledge on their potential harmful effects on the environment remains poorly documented. There are few data available on the effects of engineered nanoparticles on algae, plants, and fungi [23] as well as on aquatic invertebrates. Overall there are currently less than 50 open peer-reviewed ecotoxicity studies on environmentally relevant species [24]. Nanomaterial-wise, the existing ecotoxicological information mainly concerns toxicity data on fullerenes, carbon nanotubes and TiO 2 [19,[24][25][26]. As an indicator concerning various metal oxide nanoparticles, a bibliometric search on 4th July 2008 in ISI Web of Science showed that although there were more than 150 hits in combining keywords on respective nano metal oxides and "toxic*" but only 10 hits for "ecotoxic" (Table 1). Thus, the current minireview summarizes existing literature on ecotoxic effects of ZnO, TiO 2 and CuO nanoparticles (Figure 1), especially to aquatic invertebrates, algae and bacteria.   1980-2008. Combinations of key-words comprising "nano*", "toxic*" and "ecotoxic*" inserted for the search in "topic" were used as indicated in Table 1

Reactive Oxygen Species (ROS)
Currently, the best-developed paradigm for nanoparticles toxicity for eukaryotes is generation of reactive oxygen species (ROS) [7,27]. ROS production is especially relevant in the case of nanoparticles with photocatalytic properties such as TiO 2 [28]. ROS have been shown to damage cellular lipids, carbohydrates, proteins and DNA [29] and leading to inflammation and oxidative stress response [27,30,31]. Lipid peroxidation is considered the most dangerous since it leads to alterations in cell membrane properties which in its turn disrupts vital cellular functions [21,32,33]. The oxidative stress mechanisms are also linked to a number of human pathologies and aging [34,35]. Experimentally, nanoparticles have been shown to induce oxidative stress responses in vitro in keratinocytes, macrophages and blood monocytes [36,37]. Recent in vitro data also revealed ROS-mediated potential neurotoxicity of nano TiO 2 [38]. In human lung epithelial cells, the chemical composition of nanoparticles was the most decisive factor determining the formation of ROS in exposed cells to iron-, cobalt-, manganese-, and titanium-containing silica nanoparticles and respective pure metal oxide nanoparticles [39]. During their life cycle, engineered nanoparticles might also produce ROS upon interactions with abiotic and biotic environmental factors. Indeed, damaging effects of TiO 2 nanoparticles on bacteria have been shown to be enhanced by sunlight or UV illumination [40]. TiO 2 nanoparticles in combination with UV-light have been shown to inactivate algae Anabaena, Microcystis and Melosira [41] and have been shown to destroy the cell surface architecture of blue-green algae Chroococcus sp. [42]. However, TiO 2 nanoparticles have shown toxicity to Bacillus subtilis and Escherichia coli also in the dark [40]. Analogously, in fish cells in vitro hydroxyl radicals were generated by TiO 2 nanoparticles also in the absence of ultraviolet light [43]. ROS could be also involved in toxicity of ZnO nanoparticles to bacteria as recently shown for Escherichia coli [44]. Heavy metals induce oxidative stress in algae via different types of ROS-generating mechanisms [45] but the role of ROS in toxicity of (metal-containing) nanoparticles in algae remains largely unknown.

Release of Metal Ions
In the case of metal-containing nanoparticles, also the release of metal ions and their speciation may be a key factor in their (eco)toxicity. Indeed, as shown for oxide nanoparticles (incl. TiO 2 and ZnO) using in vitro cell cultures, solubility of those nanoparticles strongly influenced their cytotoxicity [46]. In human lung epithelial cells in vitro, Limbach et al. [39] have recently shown that partially soluble nanoparticles such as cobalt oxide and manganese oxide may be taken up into cells by a Trojan-horse type mechanism, i.e. metal oxide nanoparticles entered the cells but not the respective ionic forms. The induced oxidative stress was therefore remarkably higher than in the case of ions of the corresponding metals for which the transport is controlled. Indeed, the metal oxide nanoparticles once in the cell may dissolve releasing higher damaging concentrations of metal ions within the cell. Liberation of cytotoxic amounts of Cd in physiological conditions has also been shown for CdSe quantum dots [47]. Therefore, it has been stressed that water solubility of nanoparticles has to be incorporated into the environmental risk assessment models of nanoparticles in addition to other key physico-chemical characteristics relevant to nanoparticles [48].
Bacteria have no internalization mechanisms for supramolecular and colloidal particles. However, <5 nm CdSe and CdSe/ZnS quantum dots have been shown to enter the bacterial cells [49], but not ellipsoidal shaped carboxylated and biotinylated CdSe/ZnS QD with minor and major axis of 12 nm and 6 nm, respectively [50]. Differently from bacteria, protists and metazoans have highly developed systems for internalization of nano and microscale particles. In addition, due to their large surface area, nanoparticles have been shown to sorb heavy metals, PAHs, quinolines [51,52]. Baun et al. [53] showed that the toxicity of phenanthrene for Daphnia magna was increased by 60% in the presence of C60 aggregates and that sorbed phenanthrene was available for the organisms. Thus nanoparticles not only act as transfer vectors in the environment, but they also facilitate the entry of nanoparticle-sorbed pollutants into cells/organisms potentiating toxic effects. Several reports and reviews on nanoparticle safety state that there are knowledge gaps concerning the ability of nanoparticles to act as vectors of chemicals, micro-organisms and interactions with other stressors [22,25].
Release of (toxic) heavy metal ion species from metal containing nanoparticles under environmental conditions should be taken into account in their ecotoxicity evaluation. Indeed, it has been shown that speciation influences mobility [54], bioavailability and (eco)toxicity of heavy metals in soils [55] as well as in aquatic systems [56][57][58]. Also, metal solubility may be changed by organisms: initially insoluble forms of heavy metals may become bioavailable due to the direct contact between bacteria and soil particles [55,59]. There are emerging data on solubility effects of metal oxide nanoparticles to environmentally relevant organisms. For the algae Pseudokirchneriella subcapitata the toxicity of nano and bulk ZnO was shown to be attributed solely to dissolved Zn [60]. Analogously, recent results by Heinlaan et al. [61] showed that toxicity of CuO and ZnO to bacteria and crustaceans Thamnocephalus platyurus was largely caused by bioavailable Cu and Zn ions, although the solubility of CuO and ZnO in water is low (pK sp values are 16.66 and 20.35, respectively). The same was demonstrated for ZnO and CuO (nano)particles for the algae Pseudokirchneriella subcapitata by Aruoja et al. (submitted to Science of the Total Environment).

Biotests for Ecotoxicological Evaluation of Metal Oxide Nanoparticles
Nel et al. [7] have stressed the importance of pragmatic and mechanism-based approach in testing the potential harmful effects of nanomaterials and three key elements of nanoparticles toxicity screening strategies have been outlined in [62]: i) physicochemical characterization (size, surface area, shape, solubility, aggregation), elucidation of biological effects involving ii) in vitro and iii) in vivo studies.
As in vivo experiments are expensive, slow and ethically questionable there is a strong demand for low-cost high-throughput in vitro toxicity assays without reducing the efficiency and reliability of the risk assessment. Moreover, in vitro studies allow detailed examination under controlled conditions of various factors involved in toxicity, such as nanoparticles attachment, intracellular localization, changes in gene and protein expression, organelles and membrane structure, viability and cell cycle [63]. In addition, this approach is adhering to 3Rs strategy (replacement, reduction, refinement) introduced by Russel and Burch [64] that means the reduction of the use of laboratory vertebrate animals (mammals, fish) in scientific studies as well as in the legislature-driven research. Indeed, it has been shown that bacterial and invertebrate animal models can be used not only in ecotoxicology [65] but also for toxicological research [67]. In their review article "Assessing the Risks of Manufactured Nanomaterials" Wiesner et al. [68] state that "Microbial ecotoxicology is a particularly important consideration in elucidating cytotoxicity mechanisms that could be extrapolated to eukaryotic cells. Moreover, because microorganisms are the foundation of all known ecosystems, serving as the basis of food webs and the primary agents for global biogeochemical cycles, they are important components of soil health. Microorganisms could serve as potential mediators of nanoparticle transformations that affect their mobility and (eco)toxicity". Crane and Handy [69] have concluded that the general approach for risk assessment of nanoparticles may involve existing regulatory ecotoxicity tests. As no single test or species of living organism show uniform sensitivity to all chemical compounds, the battery of biotests with different sensitivity profiles is often recommended and used to assure adequate evaluation of the ecotoxicological situation. Due to the complexity of ecosystems the ecotoxicological hazard assessment is more informative/predictive if the battery involves organisms of different trophic levels [70,71]. For example, in regulatory testing of ecotoxicological hazard of pure chemicals, the following test species of different food-web level are recommended: fish (OECD Guideline 203), Daphnia (OECD Guidelines 202, 211), algae (OECD Guideline 201). These aquatic species are also often used for monitoring of water quality and hazard assessment of wastewaters since they respond in a predictable manner to the presence of most types of pollutants. For example, Daphnia flagged the pollution in the River Meuse that was not detected by direct chemical measurements of water quality [72]. Several criteria have to be taken into account to select ecotoxicological assays: i) the trophic level of the test organism and its sensitivity; ii) the recognition of the test by international standardization organizations; iii) the simplicity of the test; iv) its commercial availability and v) the necessary equipment and the running costs.
Accordingly, a simplified multitrophic test battery for evaluation of hazard of nanoparticles to aquatic ecosystems could involve algae (primary producers), crustaceans and/or protozoa (consumers) and bacteria (decomposers) (Figure 2) in acute and if possible also in chronic tests: • The algae Pseudokirchneriella subcapitata (formerly Selenastrum capricornutum) (Figure 2a,b) is a relevant model organism for predicting the toxic hazard to primary producers and algal growth inhibition assay is widely used in aquatic risk assessment [73]. The assay has been also adapted for turbid samples, for example soil suspensions [74] and could be further developed for nanoparticles. As nanoparticles are shading the light necessary for growth of algae, the appropriate controls should be added to address the shading [28].
• The small aquatic crustacean Daphnia magna is considered a "keystone" species in aquatic toxicology for acute and chronic toxicity studies. Daphnia has been considered an obvious first choice for test organisms when performing ecotoxicological tests on nanomaterials [24]. The genome of another crustacean Daphnia pulex is almost sequenced and there is some toxicogenomic data also for D. magna available [75]. As particle-ingesting organisms (Figure 2c) they are very appropriate to test nanoparticles.
• Also another small crustacean, Thamnocephalus platyurus (Figure 2d), may be used in screening studies instead of Daphnia as both are crustaceans and of comparable sensitivity [61,73].
• Being ecologically widely spread and particle-ingesting organisms, protozoa are very relevant for nanotoxicology (Figure 2 e, f), particularly the well studied Tetrahymena pyriformis and Tetrahymena thermophila [71]. TETRATOX database for T. pyriformis [76] involves toxicity data for more than 2000 industrial organic compounds. T. thermophila could be important for toxicogenomic studies as its macronuclear genome was sequenced in 2006 [77]. Protozoa T. pyriformis have been studied for the effects of carbon nanotubes [78] and fullerenols [79]. It has been shown that T. thermophila ingested SWNT (single wall nanotubes) and bacteria with no apparent discrimination but at 3.6 mg SWNT/L exposure level the bacterivory became inhibited. Thus, SWNT may move up the food chain and that carbon nanotubes may potentially disrupt the role of ciliates in regulating bacterial populations [80]. Up to now there is no published peer-reviewed data on toxicity of metal oxide nanoparticles to protozoa.
• The former four tests may be done independently of the "culturing/maintenance" burden of live stocks of test species by using commercially available as "Toxkit microbiotests" (MicroBioTests Inc., Nazareth, Belgium).
• Despite of its marine origin, the most widely used bacterium for ecotoxicological studies is naturally luminescent Vibrio fischeri (Figure 2g). This bacterial luminescence inhibition assay is rapid, cheap and easy to perform and with a lot of toxicity data available for pure chemicals. Several different luminescence inhibition tests of V. fischeri have been developed so far -most of them are designed for analysis of aqueous samples (Microtox ® BioTox™, LUMIStox™, ToxAlert™), while only one of the test protocols (Flash Assay) has been successfully used for analysis of suspensions, turbid and colored samples: in this kinetic assay each sample acts as its own reference [81][82][83][84]. Flash Assay using Vibrio fischeri was recently shown to be a very powerful tool for screening of the toxicity of both, metal oxide as well as organic nanoparticles even in the case of turbidity due to insolubility and/or aggregation of particles [61,85]. V. fischeri Flash Assay has also been miniaturized (96-well microplates) for high throughput testing of nanoparticles [85]. In addition to biotests concerning a single organism species, data on the behavior and effects of nanoparticles in the environmental food-chain would be of primary importance for understanding their overall potential hazard for ecosystems. However, the harmful effects of manufactured nanoparticles on aquatic and soil organisms are largely unknown and the available information concerns mainly fullerenes [86]. For example, using C60 fullerenes as a model, the first report on the impact of synthetic nanoparticles fullerenes on microorganisms in soil was provided in 2007 [87]. Concerning metal oxide nanoparticles, ecotoxicity of TiO 2 at different aquatic food-chain level is most well documented (Table  1). In general, nanoparticles may sorb on external surfaces of bacteria [88] and probably also on phytoplankton [89] that is food for crustaceans. TiO 2 particles have been shown to adsorb onto the algal cell surface, resulting in a 2.3-fold increase of cellular weight as referred in [23]. Also, adhesion of nanoparticle aggregates to the exoskeleton of the test organisms is frequently described for the crustacean studies as summarized in [24].
Recently, dietary accumulation, elimination and ecotoxicity of fluorescent quantum dots (carboxylated and biotinylated CdSe/ZnS QDs) were investigated using two aquatic organisms -Tetrahymena pyriformis, a single-celled ciliate protozoan, and the rotifer Brachionus calyciflorus that preys on it [50]. Although the transfer of QDs was observed, limited bioconcentration and lack of biomagnification may hamper the detection of nanomaterials in invertebrate species. In addition, the used QDs concentrations are unlikely to be encountered in natural environment and natural organic matter may substantially alter behavior and bioavailability of nanoparticles.

Aggregation of Nanoparticles
Various environmental parameters may lead to aggregation of nanoparticles released in the environment. Nanoparticles tend to aggregate in seawater [86] and in freshwater systems [60]. As nanoparticles tend to aggregate and settle in aqueous suspensions as well as tend to sorb nutrients and to interfere with chemicals/parameters used for evaluation of (eco)toxicity, careful design of sample preparation and choosing of test endpoints as well as including suitable positive controls may be necessary. As some problems are similar to the testing of the soil or sediment suspensions, some lessons may be learned from following studies [74,81].
The surface properties of nanoparticles are one of the most important factors that govern their stability and mobility as colloidal suspensions or their aggregation into larger particles and deposition in aquatic systems [23]. For TiO 2 , it has been shown that nanoparticle aggregation behavior strongly depended on pH and ionic strength. Also, cationic and anionic species or the presence of humic acids affected the stability of TiO 2 suspensions [90]. It has thus been suggested [91] that aggregation may have implications on toxicity, which may result in very dissimilar biological activity. It is difficult to evaluate the (eco)toxic impact of aggregation without assessment of the specific surface area which is involved in solubilisation, adsorption and catalytic properties. In addition, in the case of metals, it is well known that reactive chemical metal species depend not only on solubility, but also on the whole set of associated ions and even on slight changes of pH. This might explain discrepancies found in the emerging literature on the aquatic toxicity of metal oxide nanoparticles summarized below.

Bioavailability of Metals from Metal Oxide Nanoparticles
Bioavailable fractions of metals from metal containing nanoparticles may be studied in a combined approach involving chemical analysis and recombinant metal-specific microbial sensors. Those genetically modified microbial biosensor strains will only produce a response if the toxic compound (for example, heavy metal) crosses the cell biological envelopes and enters the cytoplasmic space, that is if the toxicant is accessible or bioavailable to the sensing system. Mostly those sensors are based on bacteria [92]. In a metal-specific microbial sensor the expression of a reporter gene is controlled by a genetic regulatory unit (receptor), which responds to the given heavy metal, i.e. receptor-reporter concept [93] is used. Most of the regulatory units used in the construction of metal-specific sensor bacteria originate from bacteria that possess natural precisely regulated resistance systems towards heavy metals. As those recombinant bacterial cells are specially modified to respond to intracellular subtoxic concentrations of heavy metals by increasing an easily detectable signal, for example luminescence, they are very promising tools to detect bioavailable heavy metals. A number of recombinant bacterial sensors for Cd, As, Sb, Cr, Cu, Hg, Zn and Pb reviewed in [94,95] have been developed.
Metal-specific recombinant bacterial sensors have been constructed and used for the determination of bioavailable fractions of inorganic mercury [96,97], organomercurials [98], zinc, cadmium, cobalt and lead [99], cadmium and lead [97,100], nickel [101] and chromate [97]. This approach based on biovailability of heavy metals in different environmental matrices has been successfully used for environmental hazard evaluation in soils [55,59,102]. As dissolved metal concentrations may be very low, sensitized bacterial heavy metal sensors based on knock-out mutants of Pseudomonas putida metal transporters have been constructed and their increased sensitivity towards heavy metals demonstrated [103]. Recently, recombinant sensor bacteria have been used in totally novel context: for the evaluation of the bioavailability of zinc and copper in aqueous suspensions of ZnO and CuO nanoparticles and comparing that with ecotoxic values of respective metal ions to crustaceans [61] and microalgae (Aruoja et al., submitted to Science of the Total Environment).

TiO 2
In the case of bacteria, high concentrations of nano TiO 2 (66 nm advertised particle size) were needed to inhibit the growth of Escherichia coli: 5,000 mg TiO 2 /L was reducing the growth of bacteria by 72% whereas Bacillus subtilis was slightly more sensitive (1,000 mg TiO 2 resulted in 75% growth inhibition) [40]. For the marine bacterium Vibrio fischeri no toxic effect was observed (30-min EC50 > 20,000 mg TiO 2 /L) [61].
According to Warheit et al. [104] the Daphnia magna 48h EC 50 values and rainbow trout (Oncorhynchus mykiss) 96 h LC 50 values for fine TiO 2 particles (median particle sizes of ~380 nm) and ultrafine TiO 2 particles (median particle sizes of ~140 nm; 90 wt% TiO 2 , 7% alumina, and 1% amorphous silica), based on nominal concentrations were >100 mg/L. The algae 72 h EC 50 values based on inhibition of growth were 16 mg/L for fine TiO 2 particles and 21 mg/L for ultrafine TiO 2 particles [104]. Thus, according to [104] results of the above described aquatic toxicity screening studies demonstrated that ultrafine TiO 2 exhibited low concern for aquatic hazard using the Daphnia magna as well as using the rainbow trout and exhibited medium concern in a 72 h acute test using the green algae Pseudokirchneriella subcapitata. Analogously, nano nor bulk TiO 2 showed no concern for aquatic hazard using crustaceans D. magna and Thamnocephalus platyurus (LC 50 >10,000 mg TiO 2 /L) (tested without illumination) [61]. In another study, titanium dioxide nanoparticles showed some sublethal toxic effects (including oxidative stress) in rainbow trout when exposed to low levels (0.1-1.0 mg TiO 2 /L) during up to 14 days [105]. When filtering TiO 2 nanoparticles suspension (0.22 µm) to avoid the interference of aggregates, Lovern and Klaper [106] reported high acute toxicity to D. magna (LC 50 =5.5 mg TiO 2 /L). However, when nanoparticles of TiO 2 were illuminated before testing, acute toxic effects for daphnids occurred at lower level (1.5-3 mg TiO 2 /L) [28]. Indeed, in addition to target organism and exposure time, two major abiotic parameters seem to be involved in the actual (eco)toxicity of TiO 2 : particle size/aggregation and illumination.

2. ZnO
Ecotoxicity of nano zinc oxide has been shown to be quite comparable to bulk ZnO. For Vibrio fischeri the 30-min EC 50 was ~ 2 mg ZnO/L, for D. magna the 48-h LC 50 was in the range of ~3-9 mg ZnO/L, for T. platyurus 24-h LC 50 was ~0.2 mg ZnO/L [61] and for freshwater algae Pseudokirchneriella subcapitata 72-h EC 50 value was ~0.08 mg ZnO/L [60]. As discussed also above, soluble Zn 2+ from ZnO seems to be the main factor of its (eco)toxicity as proven by several studies. Franklin et al. [60] studied the toxicity of ZnO nanoparticles to algae P. subcapitata while also determining the concentration of dissolved Zn ions derived from ZnO. Using a physical method, i.e. dialysis membrane with a pore size of about 1 nm (permeable to Zn ions but not to ZnO particles) they showed that both nano and bulk ZnO suspensions yielded similar dissolved Zn concentrations. Analogously, using Zn-sensor bacteria and comparing the ecotoxicity of Zn 2+ and ZnO and nano ZnO, Heinlaan et al. [61] showed that toxicity of (nano) ZnO to crustaceans Daphnia magna and Thamnocephalus platyurus and bacteria Vibrio fischeri was attributed to soluble Zn 2+ . For the algae P. subcapitata, identical results were obtained by Aruoja et al. (submitted to Science of the Total Environment).

3. CuO
Copper salts have been used as biocides for a long time and the short-term toxic effect of copper is used for antifouling in marine paints, free copper ions released preventing attachment of organisms to the vessel [107]. Differently from zinc oxide, nano copper oxide has been shown to be remarkably more toxic than bulk CuO: bulk CuO was toxic to V. fischeri at ~ 4,000 mg /L, nano CuO at ~ 80 mg/L. To D. magna and T. platyurus the toxicity of bulk CuO was ~100-150 mg/L and nano CuO ~2-3 mg/L. Analogously to ZnO, the toxicity of CuO to V. fischeri and T. platyurus [61] as well as to algae Pseudokirchneriella subcapitata (Aruoja et al., submitted to Science of the Total Environment) was largely explained by soluble Cu 2+ as proved by the recombinant Cu-sensor bacteria.

Conclusions
Despite the importance of metal oxide nanoparticles, the data on their ecotoxicity are rare ( Table 1). The heterogeneity of emerging ecotoxicity data for metal oxide nanoparticles shows the need for additional studies but also for standardization/modification of the respective test protocols. The toxicity mechanisms of metal oxide nanoparticles may be related to either soluble ions or particle properties or both. In all cases, aggregation and chemical speciation play a leading role in their (eco)toxicity. Using recombinant metal-specific bacterial biosensors and a suite of multitrophic invertebrate, algal and bacterial toxicity assays in tandem, new scientific knowledge has been and can be obtained in the future on the respective role of ionic species and of particles. Currently, advances of biosensor molecular biology have led to the development of new recombinant microorganisms for research on bioavailability and (eco)toxicity of heavy metals as well as other mechanisms of toxicity. Their use in nanoecotoxicology is under development.