An Overview on Microfluidic Systems for Nucleic Acids Extraction from Human Raw Samples

Nucleic acid (NA) extraction is a basic step for genetic analysis, from scientific research to diagnostic and forensic applications. It aims at preparing samples for its application with biomolecular technologies such as isothermal and non-isothermal amplification, hybridization, electrophoresis, Sanger sequencing and next-generation sequencing. Multiple steps are involved in NA collection from raw samples, including cell separation from the rest of the specimen, cell lysis, NA isolation and release. Typically, this process needs molecular biology facilities, specialized instrumentation and labor-intensive operations. Microfluidic devices have been developed to analyze NA samples with high efficacy and sensitivity. In this context, the integration within the chip of the sample preparation phase is crucial to leverage the promise of portable, fast, user-friendly and economic point-of-care solutions. This review presents an overview of existing lab-on-a-chip (LOC) solutions designed to provide automated NA extraction from human raw biological fluids, such as whole blood, excreta (urine and feces), saliva. It mainly focuses on LOC implementation aspects, aiming to describe a detailed panorama of strategies implemented for different human raw sample preparations.


Introduction
Nucleic acid (NA) diagnostics, often called molecular diagnostics, consist of measuring DNA or RNA to evaluate the presence of pathological conditions, such as genetic dysregulations or invading pathogens. Most of the developed techniques in this field include a nucleic acid amplification step (commonly enabled through polymerase chain reaction-PCR-or loop amplification mediated polymorphism-LAMP-methods), which relies on nucleic acid extraction from samples [1]. Traditional NA diagnostics require access to suitable laboratories, equipped with bulky and expensive instrumentation that typically requires skilled personnel to be operated.
One of the objectives in current biotechnological research consists of developing molecular diagnostic tools easy to use, needing low amounts of samples, and possibly not requiring fully equipped labs to be operated. The concept of 'lab-on-a-chip' (LOC) goes towards this direction. The term LOC refers to a class of devices combining one or multiple biomolecular steps, typically handled in equipped laboratories, within a single miniaturized system, based on integrated microfluidic circuits. LOC enabling technologies include microfluidics [2], microelectronics [3], photolithography and other fabrication techniques [4], chemical or physical methods for cell lysis [5] and for NA purification [6,7]. Some of the described LOCs are developed with the only purpose of extracting NA for further analyses, while others are coupled with a subsequent amplification or detection steps in a continuous system. In this review, both of these LOC categories are considered, because the aim is to highlight methods for NA extraction useful for improving automation of existing amplification devices. Fostering the idea of POC, only LOCs for NA extraction from crude biological samplings are considered. A high number of automated, portable tools have been developed for extracting NA from whole blood. In fact, this biological sample, being usually taken from venous blood draw-but also easily with a fingerstick-is easily available especially for clinical analyses involving genomic or circulating DNA, or for investigating bacterial contaminations. Nevertheless, most of the devices initially developed for whole blood showed the capability of extracting NA even from other biological raw samples such as saliva, urine, semen, nasal swab, or spinal fluid.
Different solutions for NA extraction have been implemented in order to propose novel approaches and to obtain improved LOC performances in terms of shortening extraction time (while guaranteeing a reliable process) and reducing the need for large sample volumes (preserving the achievement of adequate NA concentration). A summary of these aspects is presented in Table 1, which lists characteristics of the LOCs presented in this review.
Considering the whole process from raw sample loading to NA collection, the described extraction times span from 7 to 50 minutes. Highly straightforward methods were proposed for NA extraction from blood and blood serum, presenting a purification time of about 1 minute. Although, depending on the extraction matrix properties and techniques, the minimum starting material needed for enabling NA successful extraction in LOCs is very small for whole blood (90 nL in Hung et al. [22]), serum (0.4 µ L in Lee et al. [23]) and semen (1 µ L in Bienvenue et al. [24]), while higher volumes appear to be needed for NA extraction from saliva (at least 10 µ L in Legendre et al. [25]), urine (at least 50 µ L in Han et al. [26]), or stool (at least 200 mg in Kang et al. [27]). Other considerations on reported features are discussed further in the text. Some of the described LOCs are developed with the only purpose of extracting NA for further analyses, while others are coupled with a subsequent amplification or detection steps in a continuous system. In this review, both of these LOC categories are considered, because the aim is to highlight methods for NA extraction useful for improving automation of existing amplification devices. Fostering the idea of POC, only LOCs for NA extraction from crude biological samplings are considered. A high number of automated, portable tools have been developed for extracting NA from whole blood. In fact, this biological sample, being usually taken from venous blood draw-but also easily with a fingerstickis easily available especially for clinical analyses involving genomic or circulating DNA, or for investigating bacterial contaminations. Nevertheless, most of the devices initially developed for whole blood showed the capability of extracting NA even from other biological raw samples such as saliva, urine, semen, nasal swab, or spinal fluid.
Different solutions for NA extraction have been implemented in order to propose novel approaches and to obtain improved LOC performances in terms of shortening extraction time (while guaranteeing a reliable process) and reducing the need for large sample volumes (preserving the achievement of adequate NA concentration). A summary of these aspects is presented in Table 1, which lists characteristics of the LOCs presented in this review.
Considering the whole process from raw sample loading to NA collection, the described extraction times span from 7 to 50 minutes. Highly straightforward methods were proposed for NA extraction from blood and blood serum, presenting a purification time of about 1 minute. Although, depending on the extraction matrix properties and techniques, the minimum starting material needed for enabling NA successful extraction in LOCs is very small for whole blood (90 nL in Hung et al. [22]), serum (0.4 µL in Lee et al. [23]) and semen (1 µL in Bienvenue et al. [24]), while higher volumes appear to be needed for NA extraction from saliva (at least 10 µL in Legendre et al. [25]), urine (at least 50 µL in Han et al. [26]), or stool (at least 200 mg in Kang et al. [27]). Other considerations on reported features are discussed further in the text. Table 1. Summary of the performances for considered LOCs. Type and volume of starting biological sample, on-or off-chip lysis, NA extraction yield, principles, and total time (including pre-processing, when declared).

Microfluidic Circuits and Chip Structures
A crucial aspect in LOC development is chip structure. In general, an ideal solid surface made of a variable number of layers of elastomers, polymers, silicon or compositeglass is modeled with a pathway of microchannels and microchambers using different fabrication techniques, like micromachining, chemical etching, molding, embossing, laser ablation, soft lithography, and photolithography [77].
These systems of channels and chambers can be organized in domains or modules, each for a precise processing step of the sample in its fluidic circulation ( Figure 2).

Microfluidic Circuits and Chip Structures
A crucial aspect in LOC development is chip structure. In general, an ideal solid surface made of a variable number of layers of elastomers, polymers, silicon or compositeglass is modeled with a pathway of microchannels and microchambers using different fabrication techniques, like micromachining, chemical etching, molding, embossing, laser ablation, soft lithography, and photolithography [77].
These systems of channels and chambers can be organized in domains or modules, each for a precise processing step of the sample in its fluidic circulation ( Figure 2).
Microfluidics-defined as the use of micrometer scale channels to manipulate and process low volumes (10 −9 to 10 −18 L) of fluid samples [78]-is a crucial concept in LOC development. Microfluidic strategy consists in the controlled passage of fluids through the microchannels patterned on the chip, enabling the sample to be transferred from the inlet port to the elution chamber, passing through capture and collection steps. Moving through LOCs, fluids are suitably directed, mixed, separated or manipulated to attain the desired automated steps. The network of microchannels incorporated into the chip is connected to the external environment by drilled holes of different size; through these pathways, samples are injected into and evacuated from the microfluidic chip.  [10,23,24,46,75]. (B) Chip with a coil-shaped microchannel: the extraction domain is composed of a long microchannel with an increased surface/volume ratio of the adsorbent matrix packed inside it [31,42,61,69]. (C) Chip with a main microchannel and a side arm: sample and reagents are loaded in separate steps through different ports. Flux direction can be modulated at each phase by pressure application [9,25,33,37,76]. (D) Chip with electrokinetic motion: sample and pre-stored reagents are driven by voltage modulation into the extraction and amplification domains [65]. (E) Chip with a multi-domain design: each step of the sample processing is managed by valve activation. Generally, complex chips allow a whole sample treatment, from the lysis, the NA extraction with the development of various extraction techniques and, in some cases, the sample post-processing [27,35,39,44,47,66,67,71] Typically, LOCs for NA extraction rely on a structure that can be represented in the simplified scheme of Figure 1 and detailed in the schematized reconstruction of Figure 2: the sample is introduced through an inlet hole; a lysis step inside an inlet chamber or in a dedicated lysis module occurs (whenever not performed by a simple offline procedure); NA are captured into an extraction domain in which washing-elution phases take place, ending with the extract withdrawal through an outlet port (whenever automatic amplification does not occur). Generally, wastes are collected in a specific region of the chip.  [10,23,24,46,75]. (B) Chip with a coil-shaped microchannel: the extraction domain is composed of a long microchannel with an increased surface/volume ratio of the adsorbent matrix packed inside it [31,42,61,69]. (C) Chip with a main microchannel and a side arm: sample and reagents are loaded in separate steps through different ports. Flux direction can be modulated at each phase by pressure application [9,25,33,37,76]. (D) Chip with electrokinetic motion: sample and pre-stored reagents are driven by voltage modulation into the extraction and amplification domains [65]. (E) Chip with a multi-domain design: each step of the sample processing is managed by valve activation. Generally, complex chips allow a whole sample treatment, from the lysis, the NA extraction with the development of various extraction techniques and, in some cases, the sample post-processing [27,35,39,44,47 Microfluidics-defined as the use of micrometer scale channels to manipulate and process low volumes (10 −9 to 10 −18 L) of fluid samples [78]-is a crucial concept in LOC development. Microfluidic strategy consists in the controlled passage of fluids through the microchannels patterned on the chip, enabling the sample to be transferred from the inlet port to the elution chamber, passing through capture and collection steps. Moving through LOCs, fluids are suitably directed, mixed, separated or manipulated to attain the desired automated steps. The network of microchannels incorporated into the chip is connected to the external environment by drilled holes of different size; through these pathways, samples are injected into and evacuated from the microfluidic chip.
Typically, LOCs for NA extraction rely on a structure that can be represented in the simplified scheme of Figure 1 and detailed in the schematized reconstruction of Figure 2: the sample is introduced through an inlet hole; a lysis step inside an inlet chamber or in a dedicated lysis module occurs (whenever not performed by a simple offline procedure); NA are captured into an extraction domain in which washing-elution phases take place, ending with the extract withdrawal through an outlet port (whenever automatic amplification does not occur). Generally, wastes are collected in a specific region of the chip. Sometimes, in case of RNA extraction, there is a dedicated cDNA retrotranscription chamber. Some of these steps can be performed either online (on-chip) or offline (off-chip), depending on aim and structure of the LOC, while others represent the core of the NA extraction process and are performed on-chip.
The choice of the chip structure is a basic step and should be related to the sample type and the extraction protocol, reflecting the overall function of the LOC. Typically, lowcomplexity samples (e.g., urine, saliva) are processed by chips relying on packed adsorbent matrices, or functionalized surfaces or filtering units, which are designed with a single, long microchannel, filled with the capturing material. In case reagents are pre-loaded on a chip, a single inlet port for sample loading could be sufficient; otherwise, multiple ports should be considered when designing the chip structure. This second design is usually coupled with automatic pump systems for fluids motion, while in the first case a manual syringe could be sufficient. The mixing capacity of the system is a relevant issue to consider when designing a LOC structure, because absence of turbulence (such as in the simplest chips) implies passive diffusion mixing [79]; chips with side channels (forming T junctions) or long coil-shaped microchannels [31] represent optimal strategies to obtain an adequate passive mixing. Coil-shaped channels are also good choices to increase the surface/volume ratio of the adsorbent region, thus increasing the extracted NA quantity. This design also increases the total volume capacity, enabling processing of higher volumes of raw samples.
Typically, chip design includes chambers when extraction protocols need a separated compartmentalization (as in the case of on-chip lysis, or when a strong active mixing is necessary, or when NA are extracted with specific approaches, such as magnetic beads). A design with chambers is also required when successive steps of NA usage are included on a chip (e.g., on-chip amplification). One of the most largely utilized compounds for the fabrication of the main chip structures is PDMS (polydimethylsiloxane), a mineral-organic elastomer particularly useful because it is largely elastically deformable, optically clear, inert, non-toxic, non-flammable and inexpensive. It can be utilized alone, but it is often coupled with harder compounds, like glass or thermoplastic polymers, in layering the main structure of the chip. Because thermoplastic polymers are easily workable and less expensive than glass, several of them are very recurrent: PMMA (polymethylmethacrylate) is the most used alone [26,54,61], but more often it is coupled with PDMS [29,42,45,46,51,60,73]; PC (polycarbonate) was utilized, for example, by Ritzi-Lehnert et al. [71], who developed a PC cassette to be inserted into chip analyzers, by Hwang et al. [68], who developed a microfluidic device composed of four layers of PC, PDMS and glass, and by other authors [52,66]. Although less common, also PET (polyethylene terephthalate) and PS (polystyrene) have been used [50,62]. A good overview of the materials utilized in microfluidic chip fabrication is provided by Ren, Zhou and Wu [80]. A material is preferable to others for its cost-effective availability, optical properties, hardness or capacity of deforma-Sensors 2021, 21, 3058 9 of 27 bility, but it must also assure compatibility with the chemicals used in the protocol. For example, PDMS is not compatible with organic solvents; therefore, it should be excluded when projecting a LOC for extractions requiring such reagents. A quite complete list of chemical compatibilities has been provided by Ali et al. [7]. Advances and automation in manufacturing chips allow the bonding together of the same or different polymers into multi-layers as well as the creation of ports, chambers, channels, filters, sites for the addition of modules, etc. Even the smallest components of the fluidic system (valves, micropumps, micromixers, etc.) can be made of such materials. Some examples are shown with the chips described by Chen et al. [42] and Hwang et al. [68]: in the first study, they etched a part of the main silicon microchannel producing micropillars with the function of a weir-type filtration barrier to retain white blood cells and discard unwanted blood components; in the second study they used a flexible PDMS membrane capable of varying the volume of a microchamber upon occurrence.
While microchannels make up the circuit that transports the sample, the flux within LOCs is enabled and modulated by a motion system. In most of the cases (see Table 1), pressure-driven motion is implemented, where flux is usually sustained by external pumps (syringe pumps or pressure-driven micropumps). Depending on the specific microdevice, they allow sample or reagents circulation at an appropriate, controlled speed. Typically, the starting raw or lysed sample is pumped into the chip at a flow rate ranging between 3 and 7 µL/min, allowing NA to come in contact with the capture matrix. Most of the devices maintain constant flow rate during the whole process, while others modulate access of diverse reagents at different flow rates [9,42,45,52,67,72,77]. Shaw et al. [65] use an electro-osmotic pump operated by an external electric field (100 V/cm) through carbon electrodes positioned upon the inlet holes of each microchannel. Han et al. [26] implement a microfluidic system based on spiral micromixers generated by the operator when pushing different reagents reservoirs. This produces transverse vortex phenomena that self-mix flowing reagents. A first reservoir contains a mix of a lysis and a DNA binding buffer; a second reservoir contains PBS for washing and purification steps; a third contains the elution buffer. Also Jin et al. [58] take advantage of the microvortices generation. They developed a powerless platform with a microchannel that connects thirty-five microwells in series, where the continuous change of cross-sectional area of the flow is able to guarantee an efficient mixing with microvortices.
Another usual approach for enabling motion inside LOCs is represented by magnetic transportation: a movable or a permanent magnet transfers magnetic elements across the microfluidic circuit. Most of the time, magnetic elements are coated with functional groups capable of capturing NA by physical or chemical adsorption and enabling their transfer into collection chambers [30,73]. Sometimes, this strategy is adopted for collecting and removing cell debris [23] or for selectively binding a target (through specific antibodies), for example, for pathogen detection [41]. Magnetic beads appear to be the most versatile and rapid strategy for NA extraction (Table 1). This approach is extremely effective, but inherently more expensive.
An interesting scenario where electro-magnetic field is employed is represented by digital microfluidic platforms (DMF), which are based on electrical field modulation for the manipulation of liquid samples in the form of droplets extremely small in size [81,82]. This approach enables the implementation of droplet-based microdevices where, starting from sample, individual droplets are continuously formed and manipulated through the microchannels, or where a variable number of droplets of each reagent are manipulated and continuously moved upon a pathway of transportation electrodes (Figure 3). This last case is described in a recent study [22]: electrical and magnetic forces are generated to move and split droplets over the cartridge; the sequence of activation of electrodes and the activation of the magnet represent the automation of this type of microdevices. NA bound to magnetic beads are collected on one side of the droplet, and the separation electrode splits the whole droplet into a minor residual droplet (containing NA which will be eluted) and a major supernatant droplet (containing unbound reagents, which will be washed away). DMF platforms have also been effectively tested for RNA extraction from whole blood [57]. and removing cell debris [23] or for selectively binding a target (through specific antibodies), for example, for pathogen detection [41]. Magnetic beads appear to be the most versatile and rapid strategy for NA extraction (Table 1). This approach is extremely effective, but inherently more expensive.
An interesting scenario where electro-magnetic field is employed is represented by digital microfluidic platforms (DMF), which are based on electrical field modulation for the manipulation of liquid samples in the form of droplets extremely small in size [81,82]. This approach enables the implementation of droplet-based microdevices where, starting from sample, individual droplets are continuously formed and manipulated through the microchannels, or where a variable number of droplets of each reagent are manipulated and continuously moved upon a pathway of transportation electrodes (Figure 3). This last case is described in a recent study [22]: electrical and magnetic forces are generated to move and split droplets over the cartridge; the sequence of activation of elec- Other interesting platforms for NA extraction are represented by centrifugal-driven LOCs (or labs-on-a-disk, LODs), usually coupled with magnetic beads (details in Figure 4), electrokinetic-driven LOCs [32,65], relying on voltage application for motion by electrical gradient, and lab-on-a-paper devices, also implemented for NA extraction [40,55,56]. A recent and cost-effective innovation is microfluidic origami [83]; it is a new branch of microfluidic technology where paper can be exploited as an attractive and inexpensive platform for NA extraction [40,84] due to its intrinsic advantages such as biocompatibility, high surface area, and absorptive nature [85]. trodes and the activation of the magnet represent the automation of this type of microdevices. NA bound to magnetic beads are collected on one side of the droplet, and the separation electrode splits the whole droplet into a minor residual droplet (containing NA which will be eluted) and a major supernatant droplet (containing unbound reagents, which will be washed away). DMF platforms have also been effectively tested for RNA extraction from whole blood [57].
Other interesting platforms for NA extraction are represented by centrifugal-driven LOCs (or labs-on-a-disk, LODs), usually coupled with magnetic beads (details in Figure  4), electrokinetic-driven LOCs [32,65], relying on voltage application for motion by electrical gradient, and lab-on-a-paper devices, also implemented for NA extraction [40,55,56]. A recent and cost-effective innovation is microfluidic origami [83]; it is a new branch of microfluidic technology where paper can be exploited as an attractive and inexpensive platform for NA extraction [40,84] due to its intrinsic advantages such as biocompatibility, high surface area, and absorptive nature [85]. . Schematization of (A) centrifugal and (B) lab-on-a-disk microfluidic systems. Both types, mostly based on a magnetic beads extraction or, less commonly, on silica filtration, are developed onto a rotating platform where sample and reagents motion is enabled by centrifugal and related forces (Coriolis and Euler) that, usually in combination with pneumatic forces, handle the fluidic system and enable sample processing. This principle is applied in traditional rectangular LOCs [36,71,86] and in LOD systems [18,41,51,53,54,60]. These devices generally manage the sample by changing speed and sense of rotation: a particular example of a LOD is represented by LabDisk analyzer [28,64] which implements an automated lyse-bind-wash-elute protocol by means of a gas-phase transition magnetophoresis principle, which combines magnetic and centrifugal forces to carry NA-complexed magnetic beads through the separation liquid/gas interfaces between each reaction chamber. P = pressure application with pump; SI = Sample inlet chamber; SPE = Solid-phase extraction domain; MB = Magnetic beads chamber; LB = Lysis buffer reservoir; WB = Washing buffer reservoir; EB = Elution buffer reservoir; SO = Eluted sample outlet; W = Waste chamber.

Raw Samples Pre-Treatment
The first step for a successful NA extraction consists in the effective disruption of the cell. When cells are part of raw tissues (such as stools or solid tissues), the sample needs to undergo a complex pre-treatment (removal of solid impurities, homogenization, etc.) before proceeding with membrane lysis. Membrane lysis methods can be categorized as: (1) mechanical-by grinding, freeze-thawing, potterization, centrifugation, sonication or bead-beating; (2) chemical-by detergents, solubilizing membrane lipids, or by chaotropic agents, perforating cell membranes with the denaturation of trans-membrane proteins, by  and (B) lab-on-a-disk microfluidic systems. Both types, mostly based on a magnetic beads extraction or, less commonly, on silica filtration, are developed onto a rotating platform where sample and reagents motion is enabled by centrifugal and related forces (Coriolis and Euler) that, usually in combination with pneumatic forces, handle the fluidic system and enable sample processing. This principle is applied in traditional rectangular LOCs [36,71,86] and in LOD systems [18,41,51,53,54,60]. These devices generally manage the sample by changing speed and sense of rotation: a particular example of a LOD is represented by LabDisk analyzer [28,64] which implements an automated lyse-bind-wash-elute protocol by means of a gas-phase transition magnetophoresis principle, which combines magnetic and centrifugal forces to carry NA-complexed magnetic beads through the separation liquid/gas interfaces between each reaction chamber. P = pressure application with pump; SI = Sample inlet chamber; SPE = Solid-phase extraction domain; MB = Magnetic beads chamber; LB = Lysis buffer reservoir; WB = Washing buffer reservoir; EB = Elution buffer reservoir; SO = Eluted sample outlet; W = Waste chamber.

Raw Samples Pre-Treatment
The first step for a successful NA extraction consists in the effective disruption of the cell. When cells are part of raw tissues (such as stools or solid tissues), the sample needs to undergo a complex pre-treatment (removal of solid impurities, homogenization, etc.) before proceeding with membrane lysis. Membrane lysis methods can be categorized as: (1) mechanical-by grinding, freeze-thawing, potterization, centrifugation, sonication or bead-beating; (2) chemical-by detergents, solubilizing membrane lipids, or by chaotropic agents, perforating cell membranes with the denaturation of trans-membrane proteins, by enzymatic digestion, or by osmotic shock; (3) thermal-heating treatments; or (4) electrical (by membrane dielectric breakdown) [14,87,88]. Sample lysis can be accomplished by a single or a combined use of the above-mentioned methods, according to the type of cell to treat and, eventually, according to the needed quality or yields of the extraction. Specific nucleases can then be utilized to isolate the target NA (to obtain either RNA-free DNA or DNA-free RNA). Finally, removal of contaminants must be performed. A list of proposed approaches for on-chip raw sample pre-processing enabled by diverse LOC strategies is reported in Table 2. Additional details for off-chip pre-processing are reported in Supplementary Materials (Table S1).
Vortexing has been considered comparable to mixing by repetitive pipetting. Serum and plasma separation has been demonstrated to be processable in microfluidic formats and therefore integrable into existing LOCs [64,[89][90][91][92]. For this reason, these tissues-although they cannot be defined raw samples-are considered in the present review.
The most used methods for sample pre-processing are chemical, while thermal and mechanical (such as filtering, agitation and pressing) approaches are rarer, and usually applied to lyse bacteria or complex samples such as stools. Common reagents involved in pre-processing include buffers and salts to stabilize pH during lysis, detergents to dissolve cell membranes, and chelating agents which bind to metal ions with two positive charges (e.g., magnesium and calcium) to reduce the level of some enzyme activity such as DNases. When aiming at preserving just the RNA portion after total NA capture, Deoxyribonuclease I (DNase I)-an enzyme able to catalyze the hydrolytic cleavage of phosphodiester linkages in the DNA backbone, inducing DNA degradation-is often added in solution together with lysis buffer [58]. In most on-chip lyses, reagents needed for DNA extraction are administered manually by the operator, before running the process, through side inlet ports or by filling suitable chambers. In advanced architectures, reagents are pre-loaded on-chip. For example, reagents can be encapsulated in low-melting temperature agarose gel and pre-loaded in the respective microchannels and chambers [65], loaded previously, by connecting reagent tubes to the microfluidic system [27], or they can be contained in deformable pouches fabricated into the chip, where depressing the pouch (snap-through) squeezes liquid into the channel [66].

NA Isolation
For NA purification, whose ultimate goal is to remove the interferents from the analyte, producing a solution containing principally the NA portion can be achieved through different approaches [15]. Table 2. Pre-treatment procedures applied to different sample types and in diverse LOC strategies. In details: guanidinium salts, principally GuHCl (Guanidine hydrochloride) and GuSCN (Guanidine thiocyanate), are the most used chaotropic agents with the capacity of solubilizing proteins. Octylphenolethoxylate, commonly known as Triton-X100, is a surfactant used to extract and release the cellular content due to its reactivity with lipid membrane bilayer. DDT (Dithiothreitol) is primarily used to reduce disulphide bonds and, for example, deprotect thiolated DNA (sperm cells) or denature protein structures. Proteinase K is an enzyme used to digest protein contaminants and inactivate nucleases. Tris (tris(hydroxymethyl)aminomethane) is able to maintain pH of the buffer at a stable point, usually 8.0, and to interact with lipopolysaccharides of the membrane, destabilizing it; EDTA (ethylenediaminetetraacetic acid) is a chelating agent which binds to metal ions (e.g., magnesium and calcium), making them unavailable for other reactions such as those related to DNases activity, or breaking Gram-negative bacteria walls. SDS (sodium dodecyl sulphate) is a protein denaturing detergent. CTAB (cetyltrimethylammonium bromide) solubilizes membrane lipids and promotes cell lysis. Lysozyme is an antimicrobial enzyme able to break thick peptidoglycan structures and lyse Gram-positive bacteria, useful when aiming at infection detections. NaOH is used to perform alkaline lysis of membranes by the saponification of lipids. RNases catalyze RNA degradation. SV = Sample volume; BV = Buffer volume.   Sample is heated (90 • C for 5 min) and homogenized by a small vibrating magnet. Homogenate mixed by air bubble insufflation and filtered by a 1 µm. pore-size filter to remove fecal impurities Lysis reagents (details n.a.) are mixed with sample by air pressure application. [27] Traditional methods consist of precipitation. In these conventional, widely adopted approaches, cells are lysed, and cell debris is usually removed by centrifugation. In the most used strategy, phase separation is obtained by mixing a solution of organic solvents (typically containing phenol, chloroform and a chaotropic agent, often GuSCN) with the aqueous sample, followed by centrifugation [91,93]. Such reagents are effective in removing proteins, lipids and detergents from the solution, allowing their dissolution or accumulation at the aqueous interface by centrifugation. In particular, GuSCN denatures proteins and RNases; chloroform forms a colorless upper aqueous phase containing RNA, an interphase containing DNA and a lower phenol-chloroform phase containing proteins. NA can be collected from the upper aqueous phase by alcohol (isopropanol or ethanol) precipitation followed by rehydration [7]. Among precipitation methods, salting-out techniques are also often used-based on the exploitation of high concentrations of potassium or ammonium acetate-to allow the removal of contaminants, such as proteins and other biomolecules [15,94]. Although sufficiently effective, these approaches present several drawbacks which make them hard to be implemented on LOCs and POC tests. In fact, they are time-consuming, rely on intensive manual processing, employ hazardous reagents, potentially damaging equipment [95] and, in addition, residual phenol or chloroform may affect downstream applications such as PCR.

ON-CHIP SAMPLE
Another class of NA extraction methods is liquid-liquid extraction (LLE), based on the manipulation of aqueous pH to extract NA into an organic solvent. Knowledge of the chemical properties of biological specimens allows proper selection of the organic solvent, which is the main factor for successful isolation and purification processes [15,94]. Typical organic solutions and/or detergents for sample washing are phenol, chloroform, or cetyltrimethylammonium bromide. Although widely used for a long time, and best performing on samples with very low NA concentrations, LLE suffers from several disadvantages, which make these methods not easily implementable on LOCs. Limitations include time-consumption, presence of non-automatable steps, usage of organic solvents (which are toxic and costly), and need of expensive glassware.

Solid-Phase Extraction
More recent approaches overcome drawbacks of precipitation and LLE in on-chip NA extraction. They are called solid-phase extraction (SPE) methods. SPE involves the use of a solid material able to selectively separate the target analyte from the solution, followed by a release mechanism. This approach utilizes chemical and physical properties (i.e., hydrophobic, polar, and/or ionic features) of the solutes dissolved or suspended in a liquid (also known as the mobile phase) to separate them from undesired components when filtered through an adsorbent (also known as the stationary phase). The strong chemistry between the sorbent and the analyte of interest is at the basis of the sorption phase, while weak chemical interactions, such as van der Waals forces (non-polar interactions), dipole-dipole interactions (polar interactions) and hydrogen bonding modulate the retention/release mechanism [7]. SPE in LOCs usually consists of concentrating and purifying analytes from solution by adsorption onto a disposable solid-phase cartridge, followed by elution of the analyte with an appropriate solvent. Adsorption is typically enabled by silica structures, ionexchange resins, or gels. The most utilized substrate for SPE is represented by silica-based surfaces, which consist of silica material in form of either gel or glass particles, like glass powders, microbeads, microfibers or even microstructures such as micropillars, monoliths or membranes. The principle of silica matrices extraction is based on their exceptional ability in binding DNA under specific salt conditions: modulating pH with a chaotropic binding buffer, silanol groups gain a high affinity to the negative charged backbone of DNA. Moreover, silica material is often covered of positive ions to enhance this affinity. The presence of chaotropic salts at high concentration, coupled to organic solvents (such as ethanol or isopropanol), aids protein denaturation but also facilitates binding of NA to silica structures providing the optimal pH. It is worth to note that chaotropic salts (such as GuSCN and GuHCl) can play a double role in NA extraction, acting both as a lysis agent and being part of the binding buffer.
Different silica structures have been implemented in LOCs for NA extraction ( Figure 5). As an interesting example, Brassard et al. [36] utilize a double layer of glass microfiber filters (composed of silica with sodium, potassium or calcium) where the first layer (2.7 µm. pored) acts as a pre-filter for whole blood, while the second layer (0.7 µm. pored) acts as the capture matrix. Whereas in most cases silica structures are composed of glass, also tetraethyl-orthosilicate (TEOS) [24] and tetramethyl-orthosilicate (TMOS) [38,43] were used as capture materials. The presence of chaotropic salts at high concentration, coupled to organic solvents (such as ethanol or isopropanol), aids protein denaturation but also facilitates binding of NA to silica structures providing the optimal pH. It is worth to note that chaotropic salts (such as GuSCN and GuHCl) can play a double role in NA extraction, acting both as a lysis agent and being part of the binding buffer. Different silica structures have been implemented in LOCs for NA extraction ( Figure  5). As an interesting example, Brassard et al. [36] utilize a double layer of glass microfiber filters (composed of silica with sodium, potassium or calcium) where the first layer (2.7 µ m pored) acts as a pre-filter for whole blood, while the second layer (0.7 µ m pored) acts as the capture matrix. Whereas in most cases silica structures are composed of glass, also tetraethyl-orthosilicate (TEOS) [24] and tetramethyl-orthosilicate (TMOS) [38,43] were used as capture materials.  [33]; (B) surfaces packed with silica microbeads [9,10,38,44,68,76]; (C) colloidal sol-gel solutions packed with silica microbeads [24,25,43]; (D) silica wafer monolith [31,39,42,65] or polymer monolith with silica microbeads [69,75]; (E) silica membrane filters [29,47,53,55,56,59,72].
Because chaotropic elements can negatively interfere with downstream processes (such as NA amplification, for which they act as strong inhibitors), alternative SPE methods to a standard silica phase were set up for NA extraction. They consist of using pH dependent anion-exchange approaches [45,96] or kosmotropic salts to induce acidic conditions [97] in order to foster NA binding to the solid phase. An example of a pH-controlled approach is represented by chitosan-coated structures. This strategy promotes NA binding to-and release from-the chitosan phase based on a change in buffer pH. Chitosan is a polymer with a high number of amine groups, which presents a cationic charge at pH 5; but it is easily neutralized at pH 9: this property has been shown to be effective  [33]; (B) surfaces packed with silica microbeads [9,10,38,44,68,76]; (C) colloidal sol-gel solutions packed with silica microbeads [24,25,43]; (D) silica wafer monolith [31,39,42,65] or polymer monolith with silica microbeads [69,75]; (E) silica membrane filters [29,47,53,55,56,59,72].
Because chaotropic elements can negatively interfere with downstream processes (such as NA amplification, for which they act as strong inhibitors), alternative SPE methods to a standard silica phase were set up for NA extraction. They consist of using pH dependent anion-exchange approaches [45,96] or kosmotropic salts to induce acidic conditions [97] in order to foster NA binding to the solid phase. An example of a pH-controlled approach is represented by chitosan-coated structures. This strategy promotes NA binding to-and release from-the chitosan phase based on a change in buffer pH. Chitosan is a polymer with a high number of amine groups, which presents a cationic charge at pH 5; but it is easily neutralized at pH 9: this property has been shown to be effective for DNA extraction at pH 5 and its release from chitosan at pH 9 [45]. Moreover, low-molecular weight chitosan is a proven inhibitor of RNases, demonstrating the advantages of chitosan as a solid phase for RNA purification compared to silica [10]. A recent study by Gan et al. [46] showed a chitosan-coated version of the Fusion 5 filter. In this version of the platform, DNA extraction is due to both the entanglement of the long-chain DNA molecules on the filter weave, made of glass fibers bonded with organic binders, and the electrostatic adsorption to the chitosan polymer, which keeps the DNA bound even at high pH (useful feature for successive on-chip amplification, which requires a pH increase). Around pH 5, DNA molecules are "actively" adsorbed onto the chitosan-modified fibers. Once DNA is adsorbed, the physical entanglement of the long-chain molecules with the fiber matrix can also assist the capture. At pH 9, although DNA is not "actively" absorbed onto the fibers, DNA molecules remain bound due to the physical trapping of these long-chain DNA molecules within the fiber matrix against washing and elution.
Another variety of SPE techniques for NA is based on electrostatic or covalent interactions between DNA and surfaces modified through amine coatings. Amine groups below neutral pH have a positive charge (causing negatively charged DNA to bind), which decreases above neutral pH [14]. An example is represented by Shin [52] and Han et al. [26], who use DMA (dimethyl-adipimidate), a non-chaotropic reagent able to bind fragmented DNA to its amino groups, and APTES (3-aminopropyl-triethoxysilane)-coated glass, which captures DNA/DMA complexes. Using the same amino-silanized surface as capture matrix, DMP (dimethyl-pimelimidate) is used as an alternative to DMA, for NA extraction, thanks to its ability of creating complexes with NA by covalent bonds of the amino groups of DMP molecules [58].
Electrostatic interactions were sometimes coupled to nanoporous membrane filtration, obtained for example through mid-sized pores in aluminum oxide membrane [98], to improve NA extraction, as in the case of Kim and Gale [37], who developed a microfluidic system for DNA capture relying on an aluminum oxide membrane with 100 nm pores size. Electrostatic attraction between DNA and alumina causes it to adsorb to the membrane, while other components flow into the waste chamber.

Magnetic Particles
Often, magnetic particles, or beads, have been coupled to suitable buffer systems for rapid and efficient NA extraction. Their use is rapid, simple to perform and can be automated, although more expensive than other methodologies. Magnetic particles work on the principle of complementary hybridization and are composed of a magnetic core, such as magnetite (Fe 3 O 4 ) or maghemite (Fe 2 O 3 ), usually coated with a matrix of polymers, silica, or hydroxyapatite with terminal functionalized groups to enable NA capture. The most recurrent covalent functionalizations of magnetic beads are carboxy-, amino-, hydroxy-, thio-terminations of the coated surface, while the non-covalent ones are represented by bioactivated coatings (peptides, aptamers, biotin, streptavidin, etc.) or rely on hydrophobic interactions [99]. The method is based on the principle that NA can reversibly bind the solid surface, previously coated with NA binding antibodies, aptamers, or with functional groups that interact specifically with DNA. The reversible complexation of beads with nucleic acids is controlled by adjusting the pH or the salt concentration [100]. For LOC devices, the advantage of using magnetic particles is that they can be used free floating in solution, thereby maximizing the interaction between sample and beads, and then collected in a microchannel or a microchamber using a magnetic field, rather than by centrifugation or filtration.
Magnetic beads (Figure 6) represent the most commonly adopted strategy for NA extraction. After binding, beads are separated from contaminating cellular components, washed, and exposed to ethanol to obtain a purified DNA elution [101]. The majority of LOCs based on a magnetic beads NA extraction utilize beads with silica coatings (Table 1); they are added and mixed to sample and lysis buffers [28,[49][50][51]54,60,61,63,64,67,70,71,73]. After cell lysis, DNA-bound beads are driven and collected by a magnetic coil, while the unbound debris is removed by a stream of washing buffers. Some approaches couple magnetic field with heating to improve the whole process [27]. For example, Lee et al. [23] describe a compact device based on a laser-irradiated magnetic beads system (LIMBS). It is equipped with carboxylic acid-terminated polystyrene magnetic beads, involved in heat transfer and cell debris adsorption, and operates with a laser-beam irradiation (1 W for 40 s), able to heat magnetic beads. The continuous vibration occurring on the chip by means of a motor is responsible for beads collision with the cellular targets, enabling heat transfer to them. The combination of heat shock and mechanical agitation breaks membranes, making cells release nucleic acids in solution. Functional groups on the polystyrene surface of the magnetic beads have the capacity to adsorb most of PCR inhibitors, like denatured proteins and cell debris, which are removed by capture of beads with a permanent magnet. Another interesting strategy is presented by Lien et al. [35], who exploit a double step of magnetic beads usage in DNA extraction from whole blood: antibody-labeled leukocyte-specific magnetic beads, for enabling leukocytes separation, and a second type of magnetic beads (charge-switchable), able to switch charge by pH variations to bind/unbind DNA molecules. . Magnetic beads can be magnetically manipulated because of their iron core and-with their activated coatings, such as functional groups or specific antibodies-can interact and selectively bind a desired ligand. The most recurrent functionalization for NA extraction is the silicacoating. If the target is human mRNA, the easiest choice is magnetic beads coated with oligo-dT probes [48]. When aiming only at a pathogen detection, functionalization with target specific antibodies is used [41], although this falls outside the aims of the review, devoted to total NA purification.

Other Approaches
Although rarely, other materials different from silica nano-or micro-structures or magnetic-based components were used for SPE. As capture matrix, Huang et al. [74] utilize a porous polymer monolith SPE-column composed of ethylene dimethacrylate (EDMA, as crosslinker), butyl-methacrylate (BUMA), 1-dodecanol (as porogenic solvent), azobisisobutyro-nitrile (AIBN, as polymerization initiator). Differently from traditional SPEs-which exploit particle-based adsorbents-polymer monoliths, which are solid pieces of stationary phase, present bimodal structures: macropores enable passage of solvent while mesopores separate analytes. These methods assure separation capabilities similar to those of particle-based adsorbents, increasing sample throughput, reducing solvent usage, and being suitable for automation [102]. Another example is described by Choi et al. [62] who present the functional coating of a polycarbonate chip with an adsorbing surface made of a DMAMS (poly-2-dimethylaminomethyl-styrene) polymer. Such material is positively charged, so it has the capacity to electrostatically attract the negative phosphate backbone of DNA. Finally, strategies different from SPE were also adopted to extract DNA on LOCs, for example those relying on isotachophoresis [32]. Figure 6. Magnetic beads can be magnetically manipulated because of their iron core and-with their activated coatings, such as functional groups or specific antibodies-can interact and selectively bind a desired ligand. The most recurrent functionalization for NA extraction is the silica-coating. If the target is human mRNA, the easiest choice is magnetic beads coated with oligo-dT probes [48]. When aiming only at a pathogen detection, functionalization with target specific antibodies is used [41], although this falls outside the aims of the review, devoted to total NA purification.

Other Approaches
Although rarely, other materials different from silica nano-or micro-structures or magnetic-based components were used for SPE. As capture matrix, Huang et al. [74] utilize a porous polymer monolith SPE-column composed of ethylene dimethacrylate (EDMA, as crosslinker), butyl-methacrylate (BUMA), 1-dodecanol (as porogenic solvent), azobisisobutyro-nitrile (AIBN, as polymerization initiator). Differently from traditional SPEs-which exploit particle-based adsorbents-polymer monoliths, which are solid pieces of stationary phase, present bimodal structures: macropores enable passage of solvent while mesopores separate analytes. These methods assure separation capabilities similar to those of particle-based adsorbents, increasing sample throughput, reducing solvent usage, and being suitable for automation [102]. Another example is described by Choi et al. [62] who present the functional coating of a polycarbonate chip with an adsorbing surface made of a DMAMS (poly-2-dimethylaminomethyl-styrene) polymer. Such material is positively charged, so it has the capacity to electrostatically attract the negative phosphate backbone of DNA. Finally, strategies different from SPE were also adopted to extract DNA on LOCs, for example those relying on isotachophoresis [32].

Additional Considerations on RNA Isolation
Specific considerations can be associated to RNA extraction. When working with RNA, chemical differences with DNA must be considered. In fact, RNA is very different from DNA in terms of chemical stability. The single -OH group difference makes the ribose sugar much more chemically reactive than deoxyribose. Additionally, RNases, a class of RNA degrading enzymes ubiquitous and robust, can rapidly destroy RNA molecules. Due to RNA fragility, a reverse transcription phase to complementary DNA (cDNA) is necessary in order to stabilize molecules and allow further processing after extraction.
RNA is more closely related to proteins than DNA, so it is able to describe a scenario tightly connected to the actual cellular machinery. Nevertheless, whereas a large number of LOCs were developed for DNA extraction, microfluidic systems dedicated to RNA purification are relatively rare in literature. This is probably due to its high instability and susceptibility to degradation, thus requiring special care and precaution during isolation and processing. Moreover, due to affinity of many matrices (such as the silica ones) for both DNA and RNA, most of the extraction systems finely tuned for DNA also bind RNA, thus reducing the need for RNA dedicated solutions.
In these systems, both NA types are isolated from the same biological sample at the same time, and extraction specificity is usually assured by the endonuclease activity of either DNase I or RNase A modulating their action to recover either RNA or DNA, respectively. Strong denaturants are typically used in intact RNA isolation to inhibit endogenous RNases, which are heat-stable and refold following heat denaturation [11].
Reedy et al. [9] perform both DNA and RNA extractions with their LOC, and, when only RNA was needed, DNA was digested at the end of the extraction process. Also Hagan et al. [10] digest DNA at the end of the extraction with a DNase. Nevertheless, in some cases, specific protocols were implemented for RNA purification. Capture of eukaryotic mRNA, which is clearly characterized by a poly-A tail (a sequence of polyadenylic acid at the 3 terminus), has been performed exploiting magnetic beads coated with oligo-dTs. Additionally, Han et al. [14], who perform mRNA extraction and cDNA synthesis on the same device, utilize oligo-dT magnetic beads, which here are led to the elution chamber by taking advantage of lateral magnetophoresis technique. Another example of poly-T functionalization is described by Lee et al. [48] in their lateral magnetophoresis mRNA microextractor, and also by Satterfield et al. [103] with the surface of a methacrylate-based porous polymer monolith (PPM) functionalized with 20-mer oligo-dT.
When the chip included a PCR module or the RNA target was immediately amplified by off-chip PCR, as it is common for viral RNA detection in human specimens, generally both nucleic acids are extracted together with no need of endonuclease digestion.

Post-Processing
NA purification on LOCs can be achieved using either of the two following strategies: selectively binding NA to the adsorbent matrices while washing out, usually with a nonpolar solvent, the rest of cell components and other chemicals, and further eluting NA with appropriate solvent for recovery; or not retaining NA, while capturing all components to discard [23]. The first approach is the most exploited.
A washing buffer is used to remove non-nucleic acid organic (i.e., proteins, lipids) and inorganic molecules (i.e., unbound components, residual detergents, lysing salts) from resultant extracts. This phase usually consists of washing the NA-adsorbed surface with a slow, controlled flow of propanol, generally applied for 15 min, and in collecting wastes into a dedicated chamber or through an outlet port. Sometimes ethanol or ethanol-based buffers are preferred to propanol (Table 3). In some LOCs, there is a unique washing step; in other cases, there is a pre-wash phase with alcoholic mixed salt buffers and a main washing step with an alcoholic buffer. Less commonly, in some specific cases with magnetic beads [73], samples can be washed by forcing their passage through an immiscible washing oil phase capable of blocking molecules to discard. In some implementations, protein separation is performed before NA capturing, using protein-capture columns [38].
Analogously to the other chemicals and independently of the chosen washing strategy, in most cases, the washing buffer is injected by syringe pumps or is pre-stored on-chip in dedicated chambers, which are activated by pressure application or by valve opening at the correct time during the purification protocol. In some implementations, vice versa-the sample is moved into the chamber containing the washing buffer. As a consequence of washing, lysed biomolecules (such as proteins, metabolites, membrane lipids, etc.), lysing detergents and any buffers used to adjust pH conditions are removed, and NA molecules remain bound to the adsorbent substrate. To be released from the capture matrix, NA must come in contact with a low ionic strength buffer, whose pH is adequate to dissolve the bonding. The elution buffer collects NA and leads it to the desired region, to gather it or for subsequent on-chip detection aims. Tris-HCl [40,67] Tris-KCl [9,37,45] NaOH [68] NaHCO 3 [26,58] Elution strictly depends on the pH of the solution, which enables or disables binding, and it also directly depends on the used capture matrix. DNA elution from silica matrix is performed by a hypo-osmotic solution, typically a low salt buffer or elution buffer, generally alkaline. A common NA elution consists in flowing pH = 8 TE buffer (Tris-EDTA). Chitosan has a cationic charge which is easily neutralized at pH = 8.5/9; therefore, NA elution from this matrix is commonly obtained by using pH = 9 TrisKCl [9,45]; the same buffer is used when eluting from aluminum oxide membranes because it showed better extraction efficiencies [37]. The same buffers are used for elution from silica-coated magnetic beads. Other alkaline eluents are utilized, for example NaOH or NaHCO 3 , but, even though a higher pH yields a more concentrated extraction, water is always widely used. In sample-in answer-out devices, where an amplification occurs after NA extraction, elution is performed directly into the PCR mix. Elution flow rates can vary significantly, depending on the microchannel section and the matrix composition, from a higher rate of 500 µL/min [68] to a slower rate of 1 µL/min [45]. It is worth to note that the elution volume represents a critical issue; in fact, while volume reduction is an advantage in terms of costs and wastes reduction, it can be troublesome for pipetting away small NA quantities in minimal elution volumes. To overcome this issue, an over-dilution step of the final eluate could be considered (e.g., Lee et al., 2020 [49]), or parallel extractions from the same raw sample should be enabled when designing the chip.

NA Applications for Medical Diagnostics
As final validation, many LOCs are tested for the application in different molecular diagnostic fields to clarify patients' genetic anomalies or occurring infections caused by pathogens, such as bacteria, DNA viruses, parasites, etc. The extraction step is crucially important because NA quality influences the success of further analyses. Many LOCs have been coupled to DNA detection methods, usually performing both steps online, relying on amplification to identify the unique sequences of specific invading pathogens within human samples. Rapid and comfortable (possibly run 'at the time and place of patient care') identification of infectious diseases can reduce further treatment costs and patient sufferings, and can contain disease spreading among the population. LOCs were fruitfully applied to detect many different pathogens from different raw sample types (Table 4). Respiratory-syncytial virus [30,70] Multiple respiratory RNA viruses [71] SARS-CoV-2 Table 5 Urine DNA Staphylococcus aureus [56] Escherichia coli [75] Stools DNA Clostridium difficile [27,74] Helicobacter pylori [73] RNA Human Enterovirus 71 [27] Spinal fluids DNA Herpes simplex virus, Varicella zoster virus [43] Although more often used for detection of proteins, metabolites or other small molecules, extraction LOCs can also be helpful in genetic disease detection [104], usually performed through DNA offline extraction followed by sequencing or genotyping approaches. More recently, LOCs were designed to capture circulating cell-free DNA (ccfDNA) from serum samples of cancer patients [105][106][107]: ccfDNA capture requires increased ability in adsorbing short fragments, thus implying customized isolation strategies [19]. Another interesting application of DNA extracted with LOCs is represented by forensic evaluations, especially when available sample volumes are extremely low [9,24,29,75]. While DNA extraction represents the basis for analyses regarding human genotype and for most of the infections caused by pathogens, RNA extraction enables procedures to shed light on the phenotypic layer of the organism, interesting to identify either pathological or specific physiological conditions detectable at the transcription level. Moreover, RNA extraction was exploited on LOCs for the detection of RNA viruses infecting human organism ( Table 4).
The recent COVID-19 pandemic has increased the need for rapid diagnoses to isolate infected population and, moreover, the need for rapid and easy-to-use devices for an effective screening of population and contact tracing of infected patients. This scenario has meant that the world of miniaturized devices was prepared to offer its own alternatives to the labor-intensive traditional RT-qPCR. A not-exhaustive list of already-validated LOCs for SARS-CoV-2 detection [108] is presented in Table 5. Generally, these devices, considered more as POC tests, rely on total NA extraction followed by RT-qPCR, performed on pre-filled cartridges or cartridges to fill with a kit of reagents for a complete processing. Table 5. List of patented and authorized POC for SARS-CoV-2 detection.

Conclusions
The present review aims at describing the strategies adopted in the literature to extract NA from raw human samples. Most LOCs were developed for genomic DNA extraction only, generally addressed to a subsequent off-device PCR analysis with bench thermocyclers, although RNA or total NA extraction are also described, often coupled with a detection domain. Diverse microfluidic solutions have been analyzed, differing in the starting raw sample, the shapes of the fluidic path, the motion strategy of analytes and reagents, the adsorbent structures, the methods for eluate and wastes collection, or the further on-chip detection. For each phase, LOC developers have to choose among a plethora of possible solutions, potentially considering intrinsic issues to take care. For example, the adsorption capacity of the chemical composition of the chip should be considered to avoid non-specific capture. A quite common case is represented by PDMS channels, which can adsorb biomolecules onto the walls [80]. To avoid this, several strategies have been proposed, such as plasma treatment, surface coating with organosilanes, or other types of functionalization. Nevertheless, most of the analyzed LOCs demonstrated extraction efficiencies similar to commercial kits, thus demonstrating that these kinds of drawbacks are relevant only when dealing with very little concentrated targets (e.g., ccfDNA, rare RNA transcripts, or low bacterial/viral presence).
The extraction strategies most compatible with LOC miniaturization are SPE methods relying on silica adsorbent matrices of various shape, layering, chemical composition and filtering capacity. SPE approaches are very efficient, although they need high volumes of reagents to bind, wash and efficiently elute. NA. Moreover, the release of shorter fragments during the elution phase could represent a difficult step when using silica matrices [7,50]. The obstruction of the extraction matrix, especially when whole blood is used, should be avoided by an effective pre-treatment of the sample or by specific flow control strategies (e.g., crossflow filtration [42]). Silica matrices are often chosen as a capture method for NA because they are easy to be integrated in miniaturized instruments, provide a high-purity eluate, and are less expensive than other matrices. Conversely, magnetic beads are the adsorbent matrix of choice in many other cases, especially in LODs, for their ease of usage, high flow rate during the extraction compared to silica matrices [16], and because they are versatile and can be coated with generic or specific functionalized layers to optimize capture precision. Nevertheless, they represent an expensive solution and often require a bulky electrical device or a unit capable of modulating magnetic field. Moreover, magnetic beads tend to aggregate, a problem that can be avoided not exceeding in magnetic force application or in motion/centrifugal speed.
LOCs for NA extraction are usually tested with whole blood samples because, on the one hand, it is a challenging sample for the development of effective capture matrices, but, on the other one, it is quite common and obtainable, commonly used for genomic DNA extraction. Other kinds of samples, such as nasal washes, aspirates, swabs or stool are mostly processed for total NA extraction in LOCs devoted to pathogens detection. Ideally, it would be possible to use the same LOC to obtain NA from various types of raw samples, adapting the pre-treatment step to adequately free NA in solution. It is therefore of paramount importance to adopt lysis protocols suitable for the specific sample.
Typically, a nucleic acid extraction performed with traditional kits and laboratory equipment can last from about 20 min to 1-3 h [117][118][119][120][121], and expert operators and expensive facilities are required. Once optimized for accuracy, miniaturization, versatility and automation, LOCs will overcome the disadvantages of traditional approaches. Indeed, the main objective of LOCs is to obtain reliable results while dramatically simplifying the entire process and reducing running time and needed volumes. These aspects would be particularly appealing, for example, in the forensic context, where the amount of available samples is often limited. Moreover, LOCs allow one to maximize experimental design, overcoming the limiting factors related to running time and reagents consumption. Finally, thanks to their compactness, portability and user-friendliness, LOCs allow the performance of on-field analyses; instead of moving samples to the laboratory, it would be possible to move the laboratory equipment to end-users, with a resulting significant reduction of sample contamination and degradation. In this perspective, LOCs can foster the development of POC tests, promoting and supporting personalized medicine, wide population screening and telemedicine.