The Chromenopyridine Scaffold: A Privileged Platform in Drug Design

The chromenopyridine scaffold represents an important class of heterocyclic compounds exhibiting a broad spectrum of biological properties. This review describes novel and efficient procedures for the synthesis of this scaffold. Herein, several methods were detailed and grouped according to their starting material (e.g., salicylaldehydes, chromones, chromanones and coumarins) and respective biological activity, when reported. This review highlights the potential of the reported synthetic strategies for preparing chromenopyridine derivatives with promising biological activity, paving the way for further developments in drug discovery.


Introduction
Drug discovery and development is a long and difficult process and medicinal chemists have been searching for inspiration in nature and synthetic compounds, with proven biological potential, to develop novel and significant molecules [1,2].Indeed, a number of molecular scaffolds present in many natural and synthetic compounds have proven to be excellent promoters for hit/lead development [1][2][3][4][5].Several "privileged structures", an expression introduced by Evans et al. in 1988, are nowadays used as templates for the development of organic compounds with impacts in biology and medicine [6].The use of these privileged scaffolds to construct disruptive compound libraries by enhancing structural diversity and physicochemical properties have ultimately led to highly potent and safe bioactive compounds.
The pyridine unit can be found in natural and synthetic compounds, fused to other motifs, giving rise to compounds with interesting biological profiles [5,[7][8][9][10] and is therefore considered an attractive scaffold [11,12].This heterocyclic unit is present in a number of natural products such as nicotinamide adenine dinucleotide phosphate (NADP), vitamins B 3 (niacin) and B 6 (pyridoxine), in the alkaloid nicotine, as well as in several FDA-approved commercial drugs such as the antituberculotic isoniazid (Figure 1) [13].Synthetic compounds incorporating the pyridine unit have also been developed and have presented diverse biological applications [2][3][4][5].The synthesis of compounds bearing a 2,4-disubstituted pyridine ring as the central building block, presenting a potent inhibitory activity of the H 4 histamine receptor (K 1 < 10 nM), has been patented by Janssen Pharmaceutica [8,14].Baraldi et al. [9] also reported the isolation of heterocyclic compounds bearing a pyridine ring fused with other aromatic moieties, such as pyrazolopyridines and imidazopyridines.These compounds proved to be potent antagonists of A 1 and A 2A adenosine receptors, important receptors for the treatment of several diseases such as chronic obstructive pulmonary disease (COPD), asthma and others.More recently, the work of Martinez-Gualda et al. [10], involving new isothiazolo [3,4-b]pyridines, has led to the discovery of new selective inhibitors of the cyclin G-associated kinase (GAK), which is associated with the treatment of viral infections caused by hepatitis C, dengue, the Zika virus from the Flaviviridae family, the Ebola filovirus and others.Radwan et al. [15] recently reported the synthesis, molecular docking studies and antimicrobial activity of new tetrasubstituted pyridines.In relation to pyrazolo [3,4-b]pyridines, Jian et al. [16] described the synthesis of these compounds based on the combretastatin structure, which were tested for their antiproliferative and tubulin polymerization inhibitory activities and demonstrated their potential for further development as novel anticancer agents.
Molecules 2024, 29, x FOR PEER REVIEW 2 of 28 imidazopyridines.These compounds proved to be potent antagonists of A1 and A2A adenosine receptors, important receptors for the treatment of several diseases such as chronic obstructive pulmonary disease (COPD), asthma and others.More recently, the work of Martinez-Gualda et al. [10], involving new isothiazolo [3,4-b]pyridines, has led to the discovery of new selective inhibitors of the cyclin G-associated kinase (GAK), which is associated with the treatment of viral infections caused by hepatitis C, dengue, the Zika virus from the Flaviviridae family, the Ebola filovirus and others.Radwan et al. [15] recently reported the synthesis, molecular docking studies and antimicrobial activity of new tetrasubstituted pyridines.In relation to pyrazolo [3,4-b]pyridines, Jian et al. [16] described the synthesis of these compounds based on the combretastatin structure, which were tested for their antiproliferative and tubulin polymerization inhibitory activities and demonstrated their potential for further development as novel anticancer agents.On the other hand, the chromene unit comprises heterocyclic compounds that incorporate a benzene ring fused to a pyran nucleus.Chromenes are present in several natural and synthetic compounds [17], and have been widely studied as therapeutic agents due to their low toxicity, especially reported for natural derivatives, and the versatility of their pharmacological applications [17].Similarly to the pyridine moiety, the chromene scaffold appears in the literature as an important building block for the development of new bioactive compounds.Various chromene-based compounds have revealed interesting anticancer [18][19][20][21][22][23][24], antimicrobial [17,[25][26][27], antibacterial [25,28,29] and antioxidant [27,30] activity, as well as other relevant biological applications, such as monoamine oxidase inhibitors [31].Haiba et al. [23] detailed a series of benzo[f]chromenes with cytotoxic activity against HepG-2 and MCF-7 cancer cell lines.Abu El-Azm et al. [19] reported a series of benzo[f]chromene, chromeno [2,3-d]pyrimidine and chromenotriazolo [1,5-c]pyrimidine derivatives with relevant antiproliferative activity against MCF-7, HePG2 and WI-38 cancer cell lines, stating that the most probable mechanism of action may involve tubulin inhibition.Thahn et al. [29] described a click chemistry approach to synthesize 1H-1,2,3triazole-tethered 4H-chromene-D-glucose conjugates with remarkable activity against Gram-positive and Gram-negative bacteria, which has also been tested with fungi.Well- On the other hand, the chromene unit comprises heterocyclic compounds that incorporate a benzene ring fused to a pyran nucleus.Chromenes are present in several natural and synthetic compounds [17], and have been widely studied as therapeutic agents due to their low toxicity, especially reported for natural derivatives, and the versatility of their pharmacological applications [17].Similarly to the pyridine moiety, the chromene scaffold appears in the literature as an important building block for the development of new bioactive compounds.Various chromene-based compounds have revealed interesting anticancer [18][19][20][21][22][23][24], antimicrobial [17,[25][26][27], antibacterial [25,28,29] and antioxidant [27,30] activity, as well as other relevant biological applications, such as monoamine oxidase inhibitors [31].Haiba et al. [23] detailed a series of benzo[f ]chromenes with cytotoxic activity against HepG-2 and MCF-7 cancer cell lines.Abu El-Azm et al. [19] reported a series of benzo[f ]chromene, chromeno [2,3-d]pyrimidine and chromenotriazolo [1,5c]pyrimidine derivatives with relevant antiproliferative activity against MCF-7, HePG2 and WI-38 cancer cell lines, stating that the most probable mechanism of action may involve tubulin inhibition.Thahn et al. [29] described a click chemistry approach to synthesize 1H-1,2,3-triazole-tethered 4H-chromene-D-glucose conjugates with remarkable activity against Gram-positive and Gram-negative bacteria, which has also been tested with fungi.Well-known examples of natural chromene-based compounds are esculetin (anticancer agent), asphodelin A (antimicrobial agent), ubichromenol (antioxidant agent) and glabridin (Alzheimer disease) (Figure 1).
The design and synthesis of innovative compounds, combining the pyridine and chromene moieties, have been extensively reported in the literature, and these diversified structures have proven their potential as antinociceptive [32][33][34], alpha adrenergic antagonist [35], bronchodilator [36][37][38], antimicrobial [39] and antibiotic [40] agents, among others [41], including in FDA-approved drugs (Figure 2).Amlexanox, an antiallergic drug with clinical effectiveness against atopic diseases, allergic asthma and rhinitis, is a molecule with a chromenopyridine skeleton.Pranoprofen, a non-steroidal anti-inflammatory drug (NSAID) used in ophthalmology, constitutes another example of a chromenopyridine-based FDA approved drug [42].known examples of natural chromene-based compounds are esculetin (anticancer agent), asphodelin A (antimicrobial agent), ubichromenol (antioxidant agent) and glabridin (Alzheimer disease) (Figure 1).The design and synthesis of innovative compounds, combining the pyridine and chromene moieties, have been extensively reported in the literature, and these diversified structures have proven their potential as antinociceptive [32][33][34], alpha adrenergic antagonist [35], bronchodilator [36][37][38], antimicrobial [39] and antibiotic [40] agents, among others [41], including in FDA-approved drugs (Figure 2).Amlexanox, an antiallergic drug with clinical effectiveness against atopic diseases, allergic asthma and rhinitis, is a molecule with a chromenopyridine skeleton.Pranoprofen, a non-steroidal anti-inflammatory drug (NSAID) used in ophthalmology, constitutes another example of a chromenopyridine-based FDA approved drug [42].This review is focused on these attractive scaffolds and presents a collection of synthetic methods for the preparation of chromenopyridines, including their potential as scaffolds for the development of novel bioactive compounds.A previously published review article, by Nunez-Vergara et al. [41], presents a good coverage of the synthesis of chromenopyridines up to 2011, which was mainly based on ANRORC-type mechanisms.This present work encompasses the latest updates on the involvement of chromenopyridines in the preparation of new compounds with biological activity, ranging from 2010 to 2023.

Synthesis and Biological Activity of Chromenopyridines
The different synthetic approaches to prepare this compound family were organized according to the starting material used.These include salicylaldehydes, chromones, chromanones, coumarins and miscellaneous/other sources.Whenever available, the biological activity of these chromenopyridines was reported, and also the reaction mechanism responsible for their formation.

Salicylaldehydes
The synthesis of chromenopyridines using salicylaldehydes as the starting material typically comprises a multi-component reaction (MCR), most commonly a three-component reaction, involving the appropriate salicylaldehyde, an active methylene compound and a nucleophile, under base catalysis.The presence of the nucleophile is paramount, as it promotes the intramolecular cyclization of the Knoevenagel adduct formed from the reaction between the active methylene compound and the salicylaldehyde into the final chromenopyridine scaffold.
Regarding the use of malononitrile and its dimer, a 2011 publication by Mishra et al. [43] proposed an improvement to the method previously reported by Evdokimov et al. in 2006 and2007 [12,44].In this approach, a one-pot three-component reaction was explored using salicylaldehydes 1, malononitrile 2 and different thiols 3, in EtOH/H2O and under K2CO3 (20% mol) catalysis.In their work, the authors compared different bases that were previously reported for pyridine synthesis, including those evaluated in Evdokimov's study, and concluded that K2CO3 afforded better reaction yields (up to 92%).Several chromenopyridines 4 were prepared in good-to-high yields (63-92%), under reflux in EtOH/H2O (Scheme 1A).A similar work was later reported by Banerjee et al. [45] (Scheme This review is focused on these attractive scaffolds and presents a collection of synthetic methods for the preparation of chromenopyridines, including their potential as scaffolds for the development of novel bioactive compounds.A previously published review article, by Nunez-Vergara et al. [41], presents a good coverage of the synthesis of chromenopyridines up to 2011, which was mainly based on ANRORC-type mechanisms.This present work encompasses the latest updates on the involvement of chromenopyridines in the preparation of new compounds with biological activity, ranging from 2010 to 2023.

Synthesis and Biological Activity of Chromenopyridines
The different synthetic approaches to prepare this compound family were organized according to the starting material used.These include salicylaldehydes, chromones, chromanones, coumarins and miscellaneous/other sources.Whenever available, the biological activity of these chromenopyridines was reported, and also the reaction mechanism responsible for their formation.

Salicylaldehydes
The synthesis of chromenopyridines using salicylaldehydes as the starting material typically comprises a multi-component reaction (MCR), most commonly a three-component reaction, involving the appropriate salicylaldehyde, an active methylene compound and a nucleophile, under base catalysis.The presence of the nucleophile is paramount, as it promotes the intramolecular cyclization of the Knoevenagel adduct formed from the reaction between the active methylene compound and the salicylaldehyde into the final chromenopyridine scaffold.
Regarding the use of malononitrile and its dimer, a 2011 publication by Mishra et al. [43] proposed an improvement to the method previously reported by Evdokimov et al. in 2006 and2007 [12,44].In this approach, a one-pot three-component reaction was explored using salicylaldehydes 1, malononitrile 2 and different thiols 3, in EtOH/H 2 O and under K 2 CO 3 (20% mol) catalysis.In their work, the authors compared different bases that were previously reported for pyridine synthesis, including those evaluated in Evdokimov's study, and concluded that K 2 CO 3 afforded better reaction yields (up to 92%).Several chromenopyridines 4 were prepared in good-to-high yields (63-92%), under reflux in EtOH/H 2 O (Scheme 1A).A similar work was later reported by Banerjee et al. [45] (Scheme 1B), using triethylamine and either refluxing ethanol (88-90% yield) or microwave irradiation at 150 • C (30-45% yield).The anticancer potential of the compounds was tested for a series of melanoma and glioma cell lines, from which compound 4a (R 1 = OMe, R 2 = Nap) was highlighted (Scheme 1B).A more recent publication by Molla et al. [46] showed good-to-high yields (85-91%) of chromenopyridine 4 when the reaction was performed using borax (10% mol) as a catalyst (Scheme 1C).
The use of homophtalonitrile 14 instead of malononitrile or derivates, as a precursor in the synthesis of chromenopyridines, has also been studied in the past years.Two recent publications [57,58] describe the experimental conditions to prepare chromenopyridines 15, 17 and 18 by a multicomponent reaction involving 14, salicylaldehydes 1 and different nucleophiles (Scheme 3A,B).The proposed methodologies are conceptually similar to those involving other active methylene compounds and are also based on the formation of an adduct from Knoevenagel condensation, followed by a tandem intramolecular cyclization promoted by Michael addition of a nucleophile, leading to the formation of the chromenopyridine scaffold.For the synthesis of compound 15, salicylaldehydes 1 and two equivalents of homophtalonitrile 14 were refluxed in ethanol, under L-Proline (30% mol) catalysis.The authors suggest that L-proline may aid in the Michael addition step of the second homophtalonitrile unit, acting as a base (Scheme 3A).For the synthesis of compounds 17 and 18, the best results were obtained by a two-step process where homophtalonitrile 14 and the appropriate salicylaldehyde 1 were reacted at 150 • C for 10 min, under microwave irradiation and ammonium acetate catalysis.Addition of an excess of the appropriate nucleophile ( 16) and one equivalent of triethylamine and heating at 150 • C for a further 10 min period, under microwave irradiation, led to product 17 (Scheme 3B).A similar work was published by Lopes et al. [60], where different nucleophiles were incorporated in the chromenopyridine moiety.The procedure involved a two-step reaction that starts from 2-aminoprop-1-ene-1,1,3-tricarbonitrile 5 and salicylaldehydes 1, from which compound 25 was isolated as a pure product in 71-84% yields only when the reaction was performed at 0 °C.Intramolecular cyclization involving either N-methylpi- Vereshchagin et al. [48,49], in collaboration with Elinson's group, developed similar procedures to prepare chromenopyridines from malononitrile dimer in a one-pot threecomponent reaction.One of the methods [49] combined salicylaldehydes 1, aminoprop-1-ene-1,1,3-tricarbonitrile 5 and 1,3-cyclohexanediones 19 in acetonitrile and under reflux conditions, with a catalytic amount of triethylamine, to prepare chromenopyridines 20 in good-to-high yields (59-88%) (Scheme 3C).Molecular docking studies of compounds 20 with mitogen-activated protein kinases 1 and 2 binding pockets showed favorable binding free energy values, which highlight their biological potential for the development of anticancer agents.In another work [48], the preparation of chromenopyridines 20 involved the use of malononitrile and formation of the dimer was considered to occur in situ under the experimental conditions that were used.This study showed that the best results were obtained when using triethylamine (10% mol) and acetonitrile, under reflux, leading to compound 20 in 53-87% yields.The same author also presented a method [47] to prepare chromenopyridines 22, by performing the reaction with 5 and 3-phenylisoxazol-5(4H)-one 21 in pyridine and under reflux, where pyridine behaved both as solvent and catalyst (Scheme 3D).The final products were obtained in 65-74% yields.A different work, by Shaabani et al. [59], described a multicomponent reaction involving salicylaldehydes 1, aminoprop-1-ene-1,1,3-tricarbonitrile 5 and secondary cyclic amines 23 (Scheme 3E).With this method, piperidine and morpholine were incorporated into the chromenopyridine scaffold, by reacting as nucleophiles in the intramolecular cyclization steps, in a reaction performed in ethanol, at room temperature, affording chromenopyridines 24 in high yields (80-94%).
A similar work was published by Lopes et al. [60], where different nucleophiles were incorporated in the chromenopyridine moiety.The procedure involved a two-step reaction that starts from 2-aminoprop-1-ene-1,1,3-tricarbonitrile 5 and salicylaldehydes 1, from which compound 25 was isolated as a pure product in 71-84% yields only when the reaction was performed at 0 • C. Intramolecular cyclization involving either N-methylpiperazine, morpholine, or ethanol, acting as nucleophiles, resulted in the final chromenopyridine scaffold (compounds 24 and 26, Scheme 3F).A selection of these compounds were tested for their anticancer activity against breast cancer cell lines where an interesting anticancer profile for the luminal breast subtype was identified for derivative 24 (R 1 = Me or OMe, Y = N-Me).These compounds presented the capacity to inhibit cell proliferation (low micromolar range) and induced cell cycle arrest, promoting apoptosis and microtubule destabilization, having also demonstrated a good safety profile in the in vivo C. elegans toxicity assay.
In the typical Hantzsch pyridine synthesis, a one-pot three-component reaction between an aldehyde, two molar equivalents of a β-ketoester and a nitrogen donor occurs to generate the pyridine ring.This procedure was directly applied to the synthesis of chromenopyridines by using salicylaldehydes.In their work, Navarrete-Encina et al. demonstrated that chromeno [3,4-c]pyridine-3-carboxylates 35 and chromeno [4,3b]pyridine-3-carboxylates 37 could be synthetized from the reaction of salycilaldehydes 1 with either two equivalents of ethylaminocrotonate 34 or three equivalents of ethyl acetoacetate 36, respectively (Scheme 5A,B) [62].The authors suggested that the reaction was initiated by the formation of the benzopyran ring by condensation of 36 with the aldehyde.The formation of the pyridine ring started by a 1,4-addition of either the Cα or the amino group of ethylaminocrotonate 34, to the benzopyran C4 atom.This determined the regioselectivity of the general process that is mainly favored by the reaction conditions used.The use of ethylaminocrotonate 34 in a reaction performed at 60 • C, and using acetic acid as solvent, led to the formation of regioisomer 35 (Scheme 5A).Reacting salicylaldehyde 1 with ammonium acetate and ethyl acetoacetate 36 under reflux, in a 1:1 mixture of acetic acid/ethanol, led to the formation of regioisomer 37, which was further oxidized to the final chromenopyridine moiety (38, Scheme 5B).In the typical Hantzsch pyridine synthesis, a one-pot three-component reaction between an aldehyde, two molar equivalents of a β-ketoester and a nitrogen donor occurs to generate the pyridine ring.This procedure was directly applied to the synthesis of chromenopyridines by using salicylaldehydes.In their work, Navarrete-Encina et al. demonstrated that chromeno [3,4-c]pyridine-3-carboxylates 35 and chromeno [4,3-b]pyridine-3-carboxylates 37 could be synthetized from the reaction of salycilaldehydes 1 with either two equivalents of ethylaminocrotonate 34 or three equivalents of ethyl acetoacetate 36, respectively (Scheme 5A,B) [62].The authors suggested that the reaction was initiated

Chromones
Chromones, and in particular substituted chromones, have been widely used as precursors for the chromenopyridine scaffold and most of the reactions proceed through an ANRORC-type mechanism [43].The first reaction step typically involves Michael addition of an active methylene compound to either position 2 or position 4 of the chromone derivative.This is followed by ring opening, bond rotation and ring closure to generate the chromene ring.For the formation of the chromenopyridine ring, the chromone precursor is typically substituted with a nitrile group at position 3 that will afford the nitrogen in the pyridine moiety.

Chromones
Chromones, and in particular substituted chromones, have been widely used as precursors for the chromenopyridine scaffold and most of the reactions proceed through an ANRORC-type mechanism [43].The first reaction step typically involves Michael addition of an active methylene compound to either position 2 or position 4 of the chromone derivative.This is followed by ring opening, bond rotation and ring closure to generate the chromene ring.For the formation of the chromenopyridine ring, the chromone precursor is typically substituted with a nitrile group at position 3 that will afford the nitrogen in the pyridine moiety.
attack to another nitrile group.The reaction was performed in ethanol, under reflux, using DBU as a base, leading to chromenopyridine 48.Ibrahim et al. also reported the preparation of new chromenopyridine derivatives 49 by reacting 6-methylchromone-3carbonitrile 43 with the malononitrile dimer 5 [67].The reaction followed an ANRORCtype mechanism, where the nitrile group was involved in the formation of the pyridine ring, fused to C3 and C4 carbons of the newly formed coumarin ring (Scheme 6C).The synthesis of tetracyclic chromonopyridines via Michael addition using heterocyclic ketene aminals as nucleophiles was also reported by Savych et al. [68].The chromonopyridine structure was generated from nucleophilic attack of the aminal 51 to chromones 50.Ring opening of the pyran ring followed by ring closure to the ketone in the 3-position ultimately led to chromenopyridines 52 (Scheme 7) in good-to-high yields (75-92%).These compounds were studied by DFT and molecular docking calculations, and the structure was confirmed by X-ray crystallography.The anti-inflammatory properties were also assessed through 15-Lipoxigenase (15-LOX) inhibition studies, and  [66].This is followed by intramolecular cyclization, with nucleophilic attack of the phenolate oxygen to the nitrile group in position 3, generating an imine that cyclized through nucleophilic attack to another nitrile group.The reaction was performed in ethanol, under reflux, using DBU as a base, leading to chromenopyridine 48.Ibrahim et al. also reported the preparation of new chromenopyridine derivatives 49 by reacting 6-methylchromone-3-carbonitrile 43 with the malononitrile dimer 5 [67].The reaction followed an ANRORC-type mechanism, where the nitrile group was involved in the formation of the pyridine ring, fused to C3 and C4 carbons of the newly formed coumarin ring (Scheme 6C).
The synthesis of tetracyclic chromonopyridines via Michael addition using heterocyclic ketene aminals as nucleophiles was also reported by Savych et al. [68].The chromonopyridine structure was generated from nucleophilic attack of the aminal 51 to chromones 50.Ring opening of the pyran ring followed by ring closure to the ketone in the 3-position ultimately led to chromenopyridines 52 (Scheme 7) in good-to-high yields (75-92%).These compounds were studied by DFT and molecular docking calculations, and the structure was confirmed by X-ray crystallography.The anti-inflammatory properties were also assessed through 15-Lipoxigenase (15-LOX) inhibition studies, and the best results (56-fold higher than the standard, quercetin) were obtained for R 1 = H, R 2 = COOCH 3 , Ar = Ph, and n = 2 (Scheme 7, compound 52a).
2016, Ibrahim et al. [70] developed a simple condensation procedure to afford pentacyclic chromenopyridines 55b from the DBU-catalyzed reaction of 4H-chromene-3carbaldehyde 53 and chroman-2,4-dione 54.By performing the reaction in DMF and under reflux conditions, compound 55b was obtained in a 54% yield (Scheme 8A).Further optical studies proceeded, and the results indicated that this scaffold could be tuned to enhance its photochemical properties, to be used as a photodetector. .Optimization of the reaction conditions showed that water was the best solvent, while the use of PEG-400 (10% mol) catalysis at 100 °C was also optimal.This procedure allowed the preparation of isoxazolyl-substituted chromenopyridines 58 in good-to-high yields (75-92%).Mechanistically, it was suggested that PEG catalyzes the condensation of isoxazolyl enamino esters and 3-formylchromones by facilitating the nucleophilic attack between the enamine nucleophile 57 and the aldehyde group of 53.After condensation, a 6π-electrocyclization occurs to afford the pyridine ring of 58.Alternatively, the A simple and convenient procedure for the preparation of chromenopyridine derivatives involves the formation of the pyridine ring either by reaction of a chromone with a nucleophile incorporating an amino group or by reaction of a chromone incorporating an amino group with a nucleophile.For example, Siddiqui et al. [69] synthesized two new chromenopyridines (mixture of 55a and 56) in a 1:2 ratio by reaction of 2-amino-4-oxo-4Hchromene-3-carbaldehyde 53 with chroman-2,4-dione 54, in refluxing methanol and in the presence of a catalytic amount of pyridine (Scheme 8A).In 2016, Ibrahim et al. [70] developed a simple condensation procedure to afford pentacyclic chromenopyridines 55b from the DBU-catalyzed reaction of 4H-chromene-3-carbaldehyde 53 and chroman-2,4-dione 54.By performing the reaction in DMF and under reflux conditions, compound 55b was obtained in a 54% yield (Scheme 8A).Further optical studies proceeded, and the results indicated that this scaffold could be tuned to enhance its photochemical properties, to be used as a photodetector.
Ponduri et al. explored the reactivity of isoxazolyl enamino esters 57 with 3-formylchromones 53 to generate new chromenopyridine-based compounds 58 (Scheme 8B) [71].Optimization of the reaction conditions showed that water was the best solvent, while the use of PEG-400 (10% mol) catalysis at 100 • C was also optimal.This procedure allowed the preparation of isoxazolyl-substituted chromenopyridines 58 in good-to-high yields (75-92%).Mechanistically, it was suggested that PEG catalyzes the condensation of isoxazolyl enamino esters and 3-formylchromones by facilitating the nucleophilic attack between the enamine nucleophile 57 and the aldehyde group of 53.After condensation, a 6π-electrocyclization occurs to afford the pyridine ring of 58.Alternatively, the chromenopyridine can be formed by condensation of a substituted 2-aminochromone with a nucleophile, followed by an intramolecular cyclization reaction.In these reactions, the nitrogen of the pyridine ring can come from the chromone or chromane moiety, typically in the form of an amine group, or from the nucleophile that is condensed with the chromene ring.Ibrahim et al. also reported the preparation of new chromenopyridine derivatives 59 by reacting 4H-chromone 53 with the malononitrile dimer 5 (Scheme 8C).Compound 53 was also reacted with 2-cyano-acetohydrazide 60 in the presence of DBU and reflux in ethanol, to afford chromenopyridines 61 (Scheme 8C) [67].
Molecules 2024, 29, x FOR PEER REVIEW 12 of 28 chromenopyridine can be formed by condensation of a substituted 2-aminochromone with a nucleophile, followed by an intramolecular cyclization reaction.In these reactions, the nitrogen of the pyridine ring can come from the chromone or chromane moiety, typically in the form of an amine group, or from the nucleophile that is condensed with the chromene ring.In a methodology reported by Dolatkhah et al.
[72], benzochromonodiazocines were reported as the only product of the reaction of 3-formylchromones 53, dialkyl acetylenedicarboxylates 62 and aromatic amines 63 under reflux in ethanol (Scheme 9A).Through a convenient and simple reaction, also with simple work-up protocols, chromenopyridines 64 were obtained in high yields (70-86%).Although no mechanistic studies were discussed in this work, it is suggested that the most probable mechanism involves a Michael addition of amine 63 to chromone 53, followed by condensation of the resulting intermediate with 62 and subsequent cyclization into the final product 64.Chromenopyridines incorporating a nitro group could be synthesized in moderate-tohigh yields via a perchloric acid-catalyzed three-component reaction (Scheme 9B) [73].This starts from the reaction of 3-formylchromenes 53, 1,1-enediamines 65 and nucleophiles 66, under mild conditions (ethanol or acetone, 50-60 °C).After optimizing the reaction conditions, the authors highlight acetone as the best solvent when ethanol is not used as a nucleophile, and perchloric acid as the best catalyst among several other acids used (the product was formed with a 81% yield).It was also reported that using temperatures higher than 50 °C did not favor the chromenopyridine formation.It was suggested that the reaction starts by Michael addition of 65 to the aldehyde of 53, In a methodology reported by Dolatkhah et al. [72], benzochromonodiazocines were reported as the only product of the reaction of 3-formylchromones 53, dialkyl acetylenedicarboxylates 62 and aromatic amines 63 under reflux in ethanol (Scheme 9A).Through a convenient and simple reaction, also with simple work-up protocols, chromenopyridines 64 were obtained in high yields (70-86%).Although no mechanistic studies were discussed in this work, it is suggested that the most probable mechanism involves a Michael addition of amine 63 to chromone 53, followed by condensation of the resulting intermediate with 62 and subsequent cyclization into the final product 64.Chromenopyridines incorporating a nitro group could be synthesized in moderate-to-high yields via a perchloric acid-catalyzed three-component reaction (Scheme 9B) [73].This starts from the reaction of 3-formylchromenes 53, 1,1-enediamines 65 and nucleophiles 66, under mild conditions (ethanol or acetone, 50-60 • C).After optimizing the reaction conditions, the authors highlight acetone as the best solvent when ethanol is not used as a nucleophile, and perchloric acid as the best catalyst among several other acids used (the product was formed with a 81% yield).It was also reported that using temperatures higher than 50 • C did not favor the chromenopyridine formation.It was suggested that the reaction starts by Michael addition of 65 to the aldehyde of 53, generating an intermediate with high degree of regioselectivity.The reaction proceeds through intramolecular cyclization, generating the 6-membered ring, which after imine-enamine tautomerization, acid-catalyzed water elimination and oxidation, leads to the chromenopyridine moiety of compounds 67 or 68, depending on the experimental conditions used.In the work performed by Lozinski et al. [74], a modified version of the Hantzsch synthesis afforded chromenopyridines 71 in good-to-moderate yields (43-69%).The procedure starts with the reaction of compound 69 with hexamethylenetetramine (HMTA) in acetic acid, followed by water addition and acidification with HCl, leading to 70 in a high yield (80-90%).Then, the modified Hantzsch reaction of 70 with an excess of 3aminocrotonate 34 afforded chromenopyridines 71.According to the authors, a predominance of C-N addition over the C-C addition pathway led to 71, which was explained by the electronic effects within the 8-formyl-7-hydroxychromone scaffold 70 (Scheme 10).

Chromanones
The use of chromanones as starting material for the preparation of chromenopyridines was also reported in the literature, and they present a similar chemical In the work performed by Lozinski et al. [74], a modified version of the Hantzsch synthesis afforded chromenopyridines 71 in good-to-moderate yields (43-69%).The procedure starts with the reaction of compound 69 with hexamethylenetetramine (HMTA) in acetic acid, followed by water addition and acidification with HCl, leading to 70 in a high yield (80-90%).Then, the modified Hantzsch reaction of 70 with an excess of 3-aminocrotonate 34 afforded chromenopyridines 71.According to the authors, a predominance of C-N addition over the C-C addition pathway led to 71, which was explained by the electronic effects within the 8-formyl-7-hydroxychromone scaffold 70 (Scheme 10).In the work performed by Lozinski et al. [74], a modified version of the Hantzsch synthesis afforded chromenopyridines 71 in good-to-moderate yields (43-69%).The procedure starts with the reaction of compound 69 with hexamethylenetetramine (HMTA) in acetic acid, followed by water addition and acidification with HCl, leading to 70 in a high yield (80-90%).Then, the modified Hantzsch reaction of 70 with an excess of 3aminocrotonate 34 afforded chromenopyridines 71.According to the authors, a predominance of C-N addition over the C-C addition pathway led to 71, which was explained by the electronic effects within the 8-formyl-7-hydroxychromone scaffold 70 (Scheme 10).

Chromanones
The use of chromanones as starting material for the preparation of chromenopyridines was also reported in the literature, and they present a similar chemical

Chromanones
The use of chromanones as starting material for the preparation of chromenopyridines was also reported in the literature, and they present a similar chemical reactivity to that observed for chromones and substituted chromones.For example, to prepare new chromenopyridine derivatives 76, a four-component reaction was developed [75].Chroman-4-one 72 reacted with aromatic aldehydes 73, ethyl cyanoacetate 74 and ammonium acetate under reflux in ethanol, affording compounds 75 in 65-82% isolated yield (Scheme 11A).These products were converted into the chlorinated chromenopyridines 76 (69-79% yields) by reaction with phosphonyl chloride, in a POCl 3 /PCl 5 mixture under reflux conditions.In their work, Thapa et al. [76,77] developed a new multicomponent reaction to prepare α-terthiophene bioisosters based on the chromenopyridine moiety, in order to enhance the rigidity of the scaffold predicted to improve its biological activity (Scheme 11B).Aldol condensation of chroman-4-one 77 with diverse aldehydes 73 under base conditions led to chromanones 77 that evolved to chromenopyridines 79 by heating at 100-110 °C with diverse 2-oxoalkylpyridinium iodides 78 in the presence of ammonium acetate and glacial acetic acid.The resulting products 79 were tested for their activity as topoisomerase (Topo) I and II inhibitors, as well as for their cytotoxicity against several human cancer cell lines.The authors considered the isolated compounds as novel chromenopyridine-based Topo I and II inhibitors [78][79][80].Compounds 79, with phenyl or thienyl substituents, were among the most relevant in terms of selectivity against Topo II.Moreover, this new batch of chromenopyridine derivatives showed interesting and improved results in various cancer cell lines, including breast cancer cell lines T47D.The selectivity towards breast cancer cell lines versus non-tumorigenic breast cell line MCF-10A was noteworthy, with some compounds having an 18-fold enhanced inhibitory capacity when compared with the reference compound.Further SAR studies proceeded with compound 79a, highlighted for its Topo I and IIα inhibitory capacity, as well as for its potent and selective antiproliferative activity via Topo Iiα inhibition (Scheme 11B) [80].In 2021, Behbehani et al. [81] proposed a green protocol for the development of thiochromeno [4,3-b]pyridine and chromeno [4,3-b]pyridine derivatives, in which a sealed Q-tube reactor was used to perform the reaction under high pressure.In this procedure, a In their work, Thapa et al. [76,77] developed a new multicomponent reaction to prepare α-terthiophene bioisosters based on the chromenopyridine moiety, in order to enhance the rigidity of the scaffold predicted to improve its biological activity (Scheme 11B).Aldol condensation of chroman-4-one 77 with diverse aldehydes 73 under base conditions led to chromanones 77 that evolved to chromenopyridines 79 by heating at 100-110 • C with diverse 2-oxoalkylpyridinium iodides 78 in the presence of ammonium acetate and glacial acetic acid.The resulting products 79 were tested for their activity as topoisomerase (Topo) I and II inhibitors, as well as for their cytotoxicity against several human cancer cell lines.The authors considered the isolated compounds as novel chromenopyridine-based Topo I and II inhibitors [78][79][80].Compounds 79, with phenyl or thienyl substituents, were among the most relevant in terms of selectivity against Topo II.Moreover, this new batch of chromenopyridine derivatives showed interesting and improved results in various cancer cell lines, including breast cancer cell lines T47D.The selectivity towards breast cancer cell lines versus non-tumorigenic breast cell line MCF-10A was noteworthy, with some compounds having an 18-fold enhanced inhibitory capacity when compared with the reference compound.Further SAR studies proceeded with compound 79a, highlighted for its Topo I and IIα inhibitory capacity, as well as for its potent and selective antiproliferative activity via Topo Iiα inhibition (Scheme 11B) [80].In 2021, Behbehani et al. [81] proposed a green protocol for the development of thiochromeno [4,3-b]pyridine and chromeno [4,3b]pyridine derivatives, in which a sealed Q-tube reactor was used to perform the reaction under high pressure.In this procedure, a three-component reaction between chroman-4one 72, arylhydrazonals 80 and ammonium acetate, in acetic acid and at 170 • C, led to chromenopyridines 81 isolated in 84-92% yields (Scheme 11C).
In 2014, El-Essawy's group published a one-pot three-component reaction involving 2,2-dialkylchroman-4-ones 82, 2-cyanoacetamide 83 and 4-substituted aldehydes 73, in a solventless reaction performed at 110-150 • C, leading to chromenopyridines 85 in 62-73% yields (Scheme 12) [82].The synthesis of compounds 84 had been previously reported [83] and in the more recent work, compounds 85 were prepared through POCl 3 chlorination of 84 and used in the synthesis of 86 by reaction with hydrazine monohydrate under reflux in ethanol.Chromenopyridines 84-86 were tested for their antibacterial activity against S. aureus (SA), B. cereus (BC), S. marcensens (SM) and P. mirabilis (PM), revealing an interesting antibacterial profile that was transversal to all the tested chromenopyridine subfamilies.Several compounds revealed relevant activity against more than one bacterial strain.Among the tested compounds, 86a (R 1 = R 2 = Et) was highlighted for the diameter of its inhibition zone and announced as a promising drug candidate when compared to the standard ampicillin (Scheme 12).
In 2014, El-Essawy's group published a one-pot three-component reaction involving 2,2-dialkylchroman-4-ones 82, 2-cyanoacetamide 83 and 4-substituted aldehydes 73, in a solventless reaction performed at 110-150 °C, leading to chromenopyridines 85 in 62-73% yields (Scheme 12) [82].The synthesis of compounds 84 had been previously reported [83] and in the more recent work, compounds 85 were prepared through POCl3 chlorination of 84 and used in the synthesis of 86 by reaction with hydrazine monohydrate under reflux in ethanol.Chromenopyridines 84-86 were tested for their antibacterial activity against S. aureus (SA), B. cereus (BC), S. marcensens (SM) and P. mirabilis (PM), revealing an interesting antibacterial profile that was transversal to all the tested chromenopyridine subfamilies.Several compounds revealed relevant activity against more than one bacterial strain.Among the tested compounds, 86a (R 1 = R 2 = Et) was highlighted for the diameter of its inhibition zone and announced as a promising drug candidate when compared to the standard ampicillin (Scheme 12).Scheme 12. Preparation of chromenopyridines 85 and 86 with the antibacterial activity (zone of inhibition, mm) of compound 86a highlighted (adapted from Ref. [82]).

Coumarins
Kok et al. [84] reported the development of new macrophage migration inhibitory factor (MIF) inhibitors, referenced as an important target in the inflammatory process, signaling tumor cell growth in inflammatory disease models.In this study, 57 amino-2Hchromenopyridine-dione derivatives 88 were prepared from the reaction of cyanoacetamides 83 and substituted coumarins 87, under mild conditions and in the presence of sodium ethoxide, with good and very good yields (Scheme 13).Most of the tested compounds showed MIF tautomerase inhibitory capacity, with IC50 in the low micromolar range, particularly compound 88a (Scheme 13).Scheme 13. Preparation of chromenopyridines 88, with the respective biological activity (MIF inhibition at 25 µM and respective IC50) highlighted for compound 88a (adapted from Ref. [84]).

Coumarins
Kok et al. [84] reported the development of new macrophage migration inhibitory factor (MIF) inhibitors, referenced as an important target in the inflammatory process, signaling tumor cell growth in inflammatory disease models.In this study, 57 amino-2H-chromenopyridine-dione derivatives 88 were prepared from the reaction of cyanoacetamides 83 and substituted coumarins 87, under mild conditions and in the presence of sodium ethoxide, with good and very good yields (Scheme 13).Most of the tested compounds showed MIF tautomerase inhibitory capacity, with IC 50 in the low micromolar range, particularly compound 88a (Scheme 13).
yields (Scheme 12) [82].The synthesis of compounds 84 had been previously reported [83] and in the more recent work, compounds 85 were prepared through POCl3 chlorination of 84 and used in the synthesis of 86 by reaction with hydrazine monohydrate under reflux in ethanol.Chromenopyridines 84-86 were tested for their antibacterial activity against S. aureus (SA), B. cereus (BC), S. marcensens (SM) and P. mirabilis (PM), revealing an interesting antibacterial profile that was transversal to all the tested chromenopyridine subfamilies.Several compounds revealed relevant activity against more than one bacterial strain.Among the tested compounds, 86a (R 1 = R 2 = Et) was highlighted for the diameter of its inhibition zone and announced as a promising drug candidate when compared to the standard ampicillin (Scheme 12).Scheme 12. Preparation of chromenopyridines 85 and 86 with the antibacterial activity (zone of inhibition, mm) of compound 86a highlighted (adapted from Ref. [82]).

Coumarins
Kok et al. [84] reported the development of new macrophage migration inhibitory factor (MIF) inhibitors, referenced as an important target in the inflammatory process, signaling tumor cell growth in inflammatory disease models.In this study, 57 amino-2Hchromenopyridine-dione derivatives 88 were prepared from the reaction of cyanoacetamides 83 and substituted coumarins 87, under mild conditions and in the presence of sodium ethoxide, with good and very good yields (Scheme 13).Most of the tested compounds showed MIF tautomerase inhibitory capacity, with IC50 in the low micromolar range, particularly compound 88a (Scheme 13).Scheme 13. Preparation of chromenopyridines 88, with the respective biological activity (MIF inhibition at 25 µM and respective IC50) highlighted for compound 88a (adapted from Ref. [84]).
Patel et al. [85] proposed a methodology for the preparation of novel chromenopyridines 94-96 from substituted 4-hydroxy-2H-chromen-2-ones 89 (Scheme 14A).The synthetic route starts by converting compounds 89 into the formylated and chlorinated coumarins 90 using POCl 3 in DMF, followed by reaction with cyclic ketones 91-93 and ammonium acetate.Alternatively, the direct reaction of compounds 89 with cyclic chloroformyl compounds 97-99 and ammonium acetate was also used.The products were evaluated for their antimicrobial activity, and all tested compounds presented better inhibitory activity for Gram-positive bacteria than for Gram-negative bacteria.For the tested compounds, products 94a and 96a were among the most active structures, with interesting minimum inhibitory concentrations (MIC) and zone of inhibition results against S. aureus (SA), S. pyogenes (SP) and A. niger (AN) (Scheme 14A).Dawane et al. also proposed the formation of chromenopyridines 101 by a PEG-400-catalyzed MCR [40].In this case, 4-hydroxy-7-methyl-coumarin 89a was reacted with different chalcones 100 and ammonium acetate, at 130 • C, using PEG-400 as solvent (Scheme 14B).This method produced diarylsubstituted chromenopyridines 101 in 81-89% yields, in a process that allowed a facile separation of the final product and reusage of the PEG-400 solvent.The proposed mechanism for the formation of compounds 101 involved the in situ generation of 4-amino-7-methylcoumarin and subsequent Michael addition of the enamine unit to 100, finishing with a ring closing step to form the pyridine ring.These compounds were tested against an array of microorganisms (e.g., E. coli and A. flavus), and several compounds demonstrated good results in one or more tested bacteria strains.A promising germination inhibition in several tested fungi was also reported.Compound 101a (R 1 = R 3 = OH, R 2 = R 4 = R 5 = Cl) showed significant inhibition of E. coli when compared with penicillin and was able to reduce or inhibit growth in all fungi tested.The use of iodine as a catalyst was also explored by Pal et al. [86].In this work, the iodine-catalyzed reaction between aromatic aldehydes 73, 4-hydroxycoumarins 89b and different amino pyrazole derivatives 102 was studied.Optimization studies showed that the use of 10% mol of I 2 as catalyst, under reflux in ethanol, were the best conditions for this reaction (Scheme 14C).Chromenopyridines 103 were prepared by a green and convenient method, with environmentally friendly catalysts and solvents and no chromatographic purification methods required.The authors also suggested that compounds 103 could be prepared from a four-component one-pot reaction, where the amino pyrazoles 102 were generated in situ from the reaction of benzoylacetonitrile and hydrazine monohydrate.The most likely mechanism to originate compounds 103 involves a Knoevenagel condensation between aldehydes 73 and 4-hydroxycoumarins 89b, followed by Michael addition of aminopyrazole 102 to the newly formed adduct, which then undergoes a tandem intramolecular cyclization reaction.The authors also suggested that iodine acts as catalyst by coordinating to the carbonyl moieties, enhancing their electrophilicity, which facilitates nucleophilic attack in the Knoevenagel condensation, Michael addition and intramolecular condensation steps.
Patel et al. also presented a method for preparing bischromeno structures 107, starting from chromenylpyridinium salts 104 [87].Compounds 104 were either reacted with chromen-2-ones 105 or chromene-3-carbaldehydes 106, in the presence of ammonium acetate and reflux in acetic acid, to afford chromenopyridines 107.The reaction proceeded through bischromene adduct XIII or XIV, respectively, which then generated the chromenopyridine scaffold by reacting with ammonium acetate (Scheme 15).The use of compound 106 afforded 107 in higher yields (54-79% vs. 38-57%).A series of chromenopyridine derivatives 107 were synthesized and tested for their antimicrobial activity for S. aureus and E. coli, as well as for their antifungal activity against A. niger and C. albicans, with some compounds, such as 107a, presenting MIC for S. aureus up to 4-fold lower than the standard, ampicillin (Scheme 15).Patel et al. also presented a method for preparing bischromeno structures 107, starting from chromenylpyridinium salts 104 [87].Compounds 104 were either reacted with chromen-2-ones 105 or chromene-3-carbaldehydes 106, in the presence of ammonium acetate and reflux in acetic acid, to afford chromenopyridines 107.The reaction proceeded through bischromene adduct XIII or XIV, respectively, which then generated the chromenopyridine scaffold by reacting with ammonium acetate (Scheme 15).The use of compound 106 afforded 107 in higher yields (54-79% vs. 38-57%).A series of chromenopyridine derivatives 107 were synthesized and tested for their antimicrobial activity for S. aureus and E. coli, as well as for their antifungal activity against A. niger and C. albicans, with some compounds, such as 107a, presenting MIC for S. aureus up to 4-fold lower than the standard, ampicillin (Scheme 15).In 2012, Khan and coworkers [88] presented a methodology to obtain chromenopyridine derivatives 111 (72-82% yield) from a three-component reaction involving 3-aminocoumarins 108, aldehydes 109 and cyclic diketones 110 under reflux in ethanol, catalyzed by p-toluenesulfonic acid (p-TSA) (20% mol) (Scheme 16A).These chromenopyridines were obtained by condensation of 109 with 110, followed by Michael addition of coumarin 108 via an enamine intermediate.The adduct formed during this process was not isolated and undergoes intramolecular cyclization, followed by dehydration, to afford the desired product 111.Later, the same author.presented a procedure for the preparation of chromenopyridines 113 [89].In this work, aminocoumarins 108 were reacted with phenylacetylenes 112, and the reaction was performed under iodine catalysis and acetonitrile reflux (Scheme 16B).Similarly to their previous work [88], mainly aromatic aldehydes were used.Several exploratory reactions to optimize the reaction conditions were also performed, confirming that a catalyst was necessary for the reaction to occur, and I 2 (10% mol) was the best catalyst.The proposed mechanism for the formation of chromenopyridines 113 involved an imine intermediate, which in turn undergoes intramolecular cyclization followed by oxidation, to afford the final product.In 2013, Chen et al. [90] prepared chromenopyridines 116 from the reaction of 4-amino-2H-chromen-2-one 114, aldehydes 106 and ethyl benzoylacetates 115 (Scheme 16C).A series of protic and Lewis acids were Iodine catalysis was also used to prepare chromenopyridines 130-132 in an MCR between 6-aminocoumarins 128, aromatic aldehydes 73 and styrene 129 (Scheme 19).Ganguly and Chandra [95] reported that the reaction occurs in an aqueous medium, using SDS as a micellar auxiliar.The optimized reaction conditions involved the use of coumarin/aldehyde/styrene in a 1:1.1:4 ratio, in aqueous SDS (10 cmc) and I 2 (10% mol), at 70-80 • C. It was mentioned that SDS behaves as an activator of iodine, important in the formation of the intermediate Schiff base from the reaction of 128 with the aromatic aldehyde 73.These conditions were applied to a wide variety of aromatic aldehydes, which afforded mixtures of 130, 131 and 132 in variable yields (25-72% for 130, 10-40% for 131 and 7-40% for 132).Nevertheless, compound 130 was always isolated as the major product.Compounds 131 and 132 were also isolated when aldehydes 73 were used.In the reaction of 6-aminocoumarin and p-iodobenzaldehyde, the non-oxidized form was isolated (133) and in the reaction of 6-amino-5-bromocoumarin with benzaldehyde, a product incorporating two equivalents of styrene was isolated (134) (Scheme 19).

Miscellaneous
The literature also reports the formation of the chromenopyridine moiety through coupling reactions.Several publications [96][97][98] on the development of new β-site amyloid precursor protein cleaving enzyme (BACE1) inhibitors reported the synthesis of a set of xanthene derivatives.However, after a series of molecular optimization studies, it was observed that the best results for balancing BACE1 potency, P-glycoprotein-mediated efflux and human Ether-à-go-go-Related Gene (hERG) binding affinity could be achieved using a chromenopyridine scaffold [99].The chromenopyridines 137 prepared in this study were generated by coupling a selection of p-substituted phenols 135 (R 1 = Br, I, OCH 3 ) with 2,5-substituted nicotinic acids 136, using NaH as catalyst, followed by ring closure of the adduct by neat polyphosphoric acid at 140 • C (Scheme 20).The enantioselective preparation of chromenopyridines 138 with an aminooxazole moiety was obtained by a three-step methodology: (i) addition of a Grignard reagent (CH 3 MgCl) to 137 and subsequent treatment with HCl in diethyl ether to afford an unstable exo-olefin; (ii) treatment of the olefin with the in situ generated iodine isocyanate at −20 • C; (iii) treatment with a solution of ammonia in 2-propanol at 23 • C, to generate a racemic mixture of the 2-aminooxazole chromenopyridine derivative.The pure (S)-enantiomer of compound 138 was obtained after chiral supercritical fluid (SCF) separation, in 13-29% yields, depending on the substituents present in the product.These chromenopyridines were then used in a variety of subsequent reactions to prepare a library of compounds with different substituents R 1 and R 2 .From this library, compound 138a is highlighted, with a promising inhibitory capacity of BACE1, among other important physicochemical properties (Scheme 20).

Miscellaneous
The literature also reports the formation of the chromenopyridine moiety through coupling reactions.Several publications [96][97][98] on the development of new β-site amyloid precursor protein cleaving enzyme (BACE1) inhibitors reported the synthesis of a set of xanthene derivatives.However, after a series of molecular optimization studies, it was observed that the best results for balancing BACE1 potency, P-glycoprotein-mediated efflux and human Ether-à-go-go-Related Gene (hERG) binding affinity could be achieved using a chromenopyridine scaffold [99].The chromenopyridines 137 prepared in this study were generated by coupling a selection of p-substituted phenols 135 (R 1 = Br, I, OCH3) with 2,5-substituted nicotinic acids 136, using NaH as catalyst, followed by ring closure of the adduct by neat polyphosphoric acid at 140 °C (Scheme 20).The enantioselective preparation of chromenopyridines 138 with an aminooxazole moiety was obtained by a three-step methodology: (i) addition of a Grignard reagent (CH3MgCl) to 137 and subsequent treatment with HCl in diethyl ether to afford an unstable exo-olefin; (ii) treatment of the olefin with the in situ generated iodine isocyanate at −20 °C; (iii) treatment with a solution of ammonia in 2-propanol at 23 °C, to generate a racemic mixture of the 2-aminooxazole chromenopyridine derivative.The pure (S)-enantiomer of compound 138 was obtained after chiral supercritical fluid (SCF) separation, in 13-29% yields, depending on the substituents present in the product.These chromenopyridines were then used in a variety of subsequent reactions to prepare a library of compounds with different substituents R 1 and R 2 .From this library, compound 138a is highlighted, with a promising inhibitory capacity of BACE1, among other important physicochemical properties (Scheme 20).

Conclusions
Chromono-and chromenopyridines combine two of the most widely recognized biologically active structural motifs, the chromene and pyridine nucleus.Bibliographical information from the years of 2010-2023 on different strategies for chromenopyridine synthesis, as well as their promising associated biological properties, have reinforced what was observed until 2010: there is a strong interest in the scientific community concerning this type of compound and its biological use.This interest has led not only to improvements on already known synthetic methods, but also to developments of new insightful methods.Furthermore, this review contributes to a thorough compilation of those discoveries, to fuel further advancements on the development of novel bioactive chromenopyridines with the potential for clinical translation.Funding: This research has been funded by National funds, through the Foundation for Science and Technology (FCT)-project UIDB/50026/2020 and UIDP/50026/2020 and by the project NORTE-01-0145-FEDER-000055, supported by Norte Portugal Regional Operational Programme (NORTE 2020), under the PORTUGAL 2020 Partnership Agreement, through the European Regional Development Fund (ERDF).We also acknowledge the financial support from University of Minho, FCT and FEDERCOMPETE for financial support through Centro de Química (UID/QUI/00686/2020 and UID/QUI/0686/2016) and project UIDB/50026/2020 and UIDP/50026/2020 and also by the project NORTE-01-0145-FEDER-000055, supported by Norte Portugal Regional Operational Programme (NORTE 2020), under the PORTUGAL 2020 Partnership Agreement, through the European Re-Scheme 20. Preparation of chromenopyridine scaffold 138, used for the preparation of 16 derivatives, as proposed by Dineen et al., with the respective biological activity (BACE1 inhibition, µg/mL) highlighted for compound 138a (adapted from Refs.[96][97][98][99]).

Conclusions
Chromono-and chromenopyridines combine two of the most widely recognized biologically active structural motifs, the chromene and pyridine nucleus.Bibliographical information from the years of 2010-2023 on different strategies for chromenopyridine synthesis, as well as their promising associated biological properties, have reinforced what was observed until 2010: there is a strong interest in the scientific community concerning this type of compound and its biological use.This interest has led not only to improvements on already known synthetic methods, but also to developments of new insightful methods.Furthermore, this review contributes to a thorough compilation of those discoveries, to fuel further advancements on the development of novel bioactive chromenopyridines with the potential for clinical translation.Funding: This research has been funded by National funds, through the Foundation for Science and Technology (FCT)-project UIDB/50026/2020 and UIDP/50026/2020 and by the project NORTE-01-0145-FEDER-000055, supported by Norte Portugal Regional Operational Programme (NORTE 2020), under the PORTUGAL 2020 Partnership Agreement, through the European Regional Development

Figure 1 .
Figure 1.Chemical structure of natural and synthetic pyridines (Blue) and chromenes (Red) with diverse biological applications.

Figure 1 .
Figure 1.Chemical structure of natural and synthetic pyridines (Blue) and chromenes (Red) with diverse biological applications.

Scheme 6 .
Scheme 6. Preparation of chromenopyridines 45, 47, 48 and 49 and antioxidant activity (IC 50 , RA = reducing agent) of compounds 45a and 45b highlighted (adapted from Refs.[65-67]).(A)-Dimitriadou et al.; (B,C)-Ibrahim et al.Ibrahim et al. reported the synthesis of diverse chromenopyridines by a cascade process starting from a 3-cyanochromone 43 and involving ring opening of the pyran ring initiated by nucleophilic attack of the malononitrile anion (Scheme 6B)[66].This is followed by intramolecular cyclization, with nucleophilic attack of the phenolate oxygen to the nitrile group in position 3, generating an imine that cyclized through nucleophilic attack to another nitrile group.The reaction was performed in ethanol, under reflux, using DBU as a base, leading to chromenopyridine 48.Ibrahim et al. also reported the preparation of new chromenopyridine derivatives 49 by reacting 6-methylchromone-3-carbonitrile 43 with the malononitrile dimer 5[67].The reaction followed an ANRORC-type mechanism, where the nitrile group was involved in the formation of the pyridine ring, fused to C3 and C4 carbons of the newly formed coumarin ring (Scheme 6C).The synthesis of tetracyclic chromonopyridines via Michael addition using heterocyclic ketene aminals as nucleophiles was also reported by Savych et al.[68].The chromonopyridine structure was generated from nucleophilic attack of the aminal 51 to chromones 50.Ring opening of the pyran ring followed by ring closure to the ketone in the 3-position ultimately led to chromenopyridines 52 (Scheme 7) in good-to-high yields (75-92%).These compounds were studied by DFT and molecular docking calculations, and the structure was confirmed by X-ray crystallography.The anti-inflammatory properties were also assessed through 15-Lipoxigenase (15-LOX) inhibition studies, and the best results (56-fold higher than the standard, quercetin) were obtained for R 1 = H, R 2 = COOCH 3 , Ar = Ph, and n = 2 (Scheme 7, compound 52a).

Scheme 7 .
Scheme 7. Preparation of chromenopyridines 52 with the antioxidant activity (IC50) of compound 52a highlighted and reaction mechanism proposed by Savych et al. (adapted from Ref. [68]).Ponduri et al. explored the reactivity of isoxazolyl enamino esters 57 with 3formylchromones 53 to generate new chromenopyridine-based compounds 58 (Scheme 8B) [71].Optimization of the reaction conditions showed that water was the best solvent, while the use of PEG-400 (10% mol) catalysis at 100 °C was also optimal.This procedure allowed the preparation of isoxazolyl-substituted chromenopyridines 58 in good-to-high yields (75-92%).Mechanistically, it was suggested that PEG catalyzes the condensation of isoxazolyl enamino esters and 3-formylchromones by facilitating the nucleophilic attack between the enamine nucleophile 57 and the aldehyde group of 53.After condensation, a 6π-electrocyclization occurs to afford the pyridine ring of 58.Alternatively, the

Scheme 19 .
Scheme 19.Preparation of chromenopyridines 130-132, with the chemical structures of the side products 133 (identified in a mixture with 130 and 132) and 134 highlighted (adapted from Ref.[95]).
Molecules 2024,29,x FOR PEER REVIEW 13 of 28generating an intermediate with high degree of regioselectivity.The reaction proceeds through intramolecular cyclization, generating the 6-membered ring, which after imineenamine tautomerization, acid-catalyzed water elimination and oxidation, leads to the chromenopyridine moiety of compounds 67 or 68, depending on the experimental conditions used.