Novel Crown Ether Amino Acids as Fluorescent Reporters for Metal Ions

Unnatural amino acids with enhanced properties, such as increased complexing ability and luminescence, are considered to be highly attractive building blocks for bioinspired frameworks, such as probes for biomolecule dynamics, sensitive fluorescent chemosensors, and peptides for molecular imaging, among others. Therefore, a novel series of highly emissive heterocyclic alanines bearing a benzo[d]oxazolyl unit functionalized with different heterocyclic π-spacers and (aza)crown ether moieties was synthesized. The new compounds were completely characterized using the usual spectroscopic techniques and evaluated as fluorimetric chemosensors in acetonitrile and aqueous mixtures in the presence of various alkaline, alkaline-earth, and transition metal ions. The different crown ether binding moieties as well as the electronic nature of the π-bridge allowed for fine tuning of the sensory properties of these unnatural amino acids towards Pd2+ and Fe3+, as seen by spectrofluorimetric titrations.

Ion sensing is imperative in many areas, including environmental, biological, clinical, and waste management applications [18][19][20]. There is great interest in the development of artificial receptors that mimic the molecular recognition phenomenon observed in nature, which is a key event in biological processes including signaling, transport, and catalysis [18]. Specifically, interest in the development of fluorescent sensors can be explained by the distinct advantages offered by fluorescence detection in terms of sensitivity, selectivity, and fast response time. Suitable fluorescent reporters must efficiently transduce a binding event into a measurable fluorescence signal by combining a fluorophore with an analyte-responsive receptor via a saturated or unsaturated spacer [19]. The development of chemosensors for the sensing of transition metal ions is one of the most active research fields, particularly in systems that are sensitive to Cu 2+ , Pd 2+ , Hg 2+ , and Fe 3+ [20].
Metallic cations can be complexed through N, O, and S donor atoms in natural amino acids, but synthetic manipulation at their side chain by the insertion of suitable heterocyclic systems can create novel functions as well as altered physicochemical properties, e.g., luminescence and recognition ability for metal ions and other analytes [21][22][23][24][25][26]. Considering only their photophysical properties, these unnatural amino acids can be used to assemble fluorescent, intrinsically labeled peptides without requiring additional probes [27].
Following our previous work on the synthesis and characterization of the optical properties of novel heterocyclic amino acids as well as their evaluation as efficient colorimetric/fluorescent probes for cations and anions [21][22][23][24][25][26][27], we now report the design, synthesis, and chemosensory abilities of five novel unnatural alanine derivatives bearing a benzoxazole as the reporting unit at the side chain, which is substituted at position 2 with a phenyl ring or a five-membered heterocycle (furan and thiophene) and linked to (aza)crown ether moieties of different size. Crown ethers display selectivity in complexation based on cavity and cation size and, in addition to alkaline metals, they are also effective complexing agents for alkaline-earth and transition metal ions [28]. If oxygen in the crown is replaced with softer donor atoms, such as nitrogen or sulfur, transition metals can also be complexed according to the hard and soft acids and bases (HSAB) theory [28]. The benzoxazole nucleus was chosen because of its photophysical properties (increased UV absorption and fluorescence) and also to increase the number of potential binding sites. The benzoxazole was further functionalized with electron donor heterocycles of different electronic nature (furan and thiophene) in order to modulate the response of the resulting unnatural amino acids as optical chemosensors.
Palladium is widely used in various materials, such as dental crowns, catalysts, fuel cells, and jewelry [29]. A significant quantity of palladium is released by cars to the roadside, where dust samples collected from broad-leaved plants are found to contain palladium, and rain may also wash Pd into local water systems. On the other hand, Pd-catalyzed reactions are extremely useful for the synthesis of complex molecules, although residual palladium (typically 300-2000 ppm) is often found in the product and may thus constitute a health hazard. Therefore, methods are urgently needed for the sensitive and selective detection of palladium [29].
The interaction of the novel amino acids with various alkaline, alkaline-earth, and transition metal cations was studied by means of UV-visible and fluorescence spectroscopy, through preliminary sensing studies, and spectrofluorimetric titrations in acetonitrile and aqueous mixtures.

Synthesis
The novel crown ether benzoxazol-5-yl-alanines 3a-e were synthesized in good to excellent yields by condensation of the methyl ester of N-tert-butyloxycarbonyl-3amino-L-tyrosine 2 and heterocyclic aldehydes 1a-e, which were commercially available (1b, Figure 1) or prepared by Vilsmeier formylation (1a, Figure 1) or Suzuki coupling (1c-e, Scheme 1). The various aldehydes consisted of (aza)crown ethers of different size, functionalized with (hetero)aryls of different electronic character (phenyl, thienyl, and furyl), in order to modulate the photophysical and chemosensory properties of the resulting benzoxazol-5-yl-alanines. Furan and thiophene are electron donor heterocycles that can contribute to the overall conjugation and provide additional binding sites for cations. It was expected that additional non-covalent interactions with the O and S heteroatoms would play a synergetic role in differentiating soft transition metal cations.
properties of novel heterocyclic amino acids as well as their evaluation as efficie metric/fluorescent probes for cations and anions [21][22][23][24][25][26][27], we now report the de thesis, and chemosensory abilities of five novel unnatural alanine derivatives benzoxazole as the reporting unit at the side chain, which is substituted at positi a phenyl ring or a five-membered heterocycle (furan and thiophene) and (aza)crown ether moieties of different size. Crown ethers display selectivity in c tion based on cavity and cation size and, in addition to alkaline metals, they a fective complexing agents for alkaline-earth and transition metal ions [28]. If o the crown is replaced with softer donor atoms, such as nitrogen or sulfur, transiti can also be complexed according to the hard and soft acids and bases (HSAB) th The benzoxazole nucleus was chosen because of its photophysical properties ( UV absorption and fluorescence) and also to increase the number of potentia sites. The benzoxazole was further functionalized with electron donor heterocyc ferent electronic nature (furan and thiophene) in order to modulate the respon resulting unnatural amino acids as optical chemosensors.
Palladium is widely used in various materials, such as dental crowns, cata cells, and jewelry [29]. A significant quantity of palladium is released by cars to side, where dust samples collected from broad-leaved plants are found to cont dium, and rain may also wash Pd into local water systems. On the other hand lyzed reactions are extremely useful for the synthesis of complex molecules, alt sidual palladium (typically 300-2000 ppm) is often found in the product and constitute a health hazard. Therefore, methods are urgently needed for the sen selective detection of palladium [29].
The interaction of the novel amino acids with various alkaline, alkaline-e transition metal cations was studied by means of UV-visible and fluorescence copy, through preliminary sensing studies, and spectrofluorimetric titrations i trile and aqueous mixtures.

Synthesis
The novel crown ether benzoxazol-5-yl-alanines 3a-e were synthesized i excellent yields by condensation of the methyl ester of N-tert-butyloxycarbonyl L-tyrosine 2 and heterocyclic aldehydes 1a-e, which were commercially availabl ure 1) or prepared by Vilsmeier formylation (1a, Figure 1) or Suzuki coupl Scheme 1). The various aldehydes consisted of (aza)crown ethers of different s tionalized with (hetero)aryls of different electronic character (phenyl, thienyl, a in order to modulate the photophysical and chemosensory properties of the resu zoxazol-5-yl-alanines. Furan and thiophene are electron donor heterocycles tha tribute to the overall conjugation and provide additional binding sites for catio expected that additional non-covalent interactions with the O and S heteroatom play a synergetic role in differentiating soft transition metal cations. The structures of the crown ether aldehydes 1a,c-e were confirmed by 1 H and 13 C NMR spectroscopy with the characteristic formyl group signals appearing in the range o 9.61-10.00 ppm (for 1 H) and 181.00-191.76 ppm (for 13 C). The NMR of compound 1c was in accordance with the previously published assignment [31].
Tyrosine 2 was obtained from commercial 3-nitro-L-tyrosine by introducing ade quate protecting groups at the N-and C-termini using standard procedures and reduction of the nitro group to amine, as previously published [24]. Crown ether aldehydes 1a-e and Azacrown ether 1a was obtained by Vilsmeier formylation of N-phenylaza-15-crown-5 with phosphorus oxychloride in N,N-dimethylformamide as a light yellow solid in 90% yield after silica gel flash chromatography, as previously published [30].
The structures of the crown ether aldehydes 1a,c-e were confirmed by 1 H and 13 C NMR spectroscopy with the characteristic formyl group signals appearing in the range of 9.61-10.00 ppm (for 1 H) and 181.00-191.76 ppm (for 13 C). The NMR of compound 1c was in accordance with the previously published assignment [31].
Tyrosine 2 was obtained from commercial 3-nitro-L-tyrosine by introducing adequate protecting groups at the Nand C-termini using standard procedures and reduction of the nitro group to amine, as previously published [24]. Crown ether aldehydes 1a-e and tyrosine 2 were condensed in a two-step procedure: the imines were obtained by heating in ethanol under reflux and used without purification in the following oxidative intramolecular cyclization, aided by lead tetraacetate (LTA) in dimethyl sulfoxide, to afford the desired crown ether benzoxazolyl-alanines 3a-e (Scheme 2).
The novel crown ether benzoxazolyl-alanines 3a-e were obtained as oils in 72-96% yields and fully characterized using the usual spectroscopic techniques. The 1 H NMR spectra of alanines 3a-e showed the characteristic signals for α-H (4.60-4.67 ppm), β-CH 2 (3.16-3.27 ppm), as well as signals due to the benzoxazole moiety. The structures were also confirmed by 13 C NMR, with the oxazole C2 appearing between 155 and 164 ppm. In the IR spectra, the characteristic absorption bands for the NH and C=O bonds of the protecting groups (ester and urethane) were also visible, confirming that the oxidative cyclization reaction conditions did not affect the integrity of the protecting groups. Scheme 2. Synthesis of crown ether benzoxazolyl-alanines 3a-e.
The novel crown ether benzoxazolyl-alanines 3a-e were obtained as oils in 72-96% yields and fully characterized using the usual spectroscopic techniques. The 1 H NMR spectra of alanines 3a-e showed the characteristic signals for α-H (4.60-4.67 ppm), β-CH2 (3.16-3.27 ppm), as well as signals due to the benzoxazole moiety. The structures were also confirmed by 13 C NMR, with the oxazole C2 appearing between 155 and 164 ppm. In the IR spectra, the characteristic absorption bands for the NH and C=O bonds of the protecting groups (ester and urethane) were also visible, confirming that the oxidative cyclization reaction conditions did not affect the integrity of the protecting groups.

Photophysical Characterization
The photophysical properties of crown ether benzoxazolyl-alanines 3a-e were evaluated by UV-vis absorption and fluorescence spectroscopy of degassed 1.0 × 10 −5 M solutions in UV-grade acetonitrile [32]. The UV-Vis absorption and fluorescence data (maximum wavelength of absorption, λ abs ; molar absorptivity, ε; maximum fluorescence wavelength, λ em ; relative fluorescence quantum yield, Φ F ; and Stokes' shift, ∆λ) are presented in Table 1. Relative fluorescence quantum yields were calculated using 9,10-diphenylanthracene as the standard (Φ F = 0.95 in ethanol) [33]. Overall, benzoxazolyl-alanines 3a-e showed intense fluorescence in the range of 362-445 nm with high relative quantum yields. The longer maximum wavelengths of absorption displayed by compounds 3c-e were consistent with more extensive conjugation along the π-system, and the position of the absorption and fluorescence bands could have been related to the different π-bridges between the amino acid core and the crown ether unit. Thus, replacement of the phenyl group in 3c by a thiophene in 3d resulted in redshifted bands due to the higher electron donor character of the sulfur heterocycle [27]. A similar rationale could be made in the comparison of 3b and 3d (not taking into account the slight difference in the crown ring size), for which the introduction of a thiophenic π-bridge between the benzoxazole and the crown unit caused a redshift of about 50 nm in the absorption band and 80 nm in the fluorescence band. For compounds 3a-b, which lacked additional π-bridges, the electron donor effect of the nitrogen at the azacrown unit was responsible for the bathochromic shift seen for 3a compared to 3b [30].
Comparison of the absorption and fluorescence data of the new crown ether benzoxazolylalanines 3a-e with previously reported benzoxazolyl-alanines bearing different substituents at position 2 of the benzoxale [25][26][27] revealed that the introduction of crown ether units did not alter significantly the photophysical properties. Most importantly, the new unnatural amino acids displayed more interesting photophysical parameters due to the extended intramolecular electron delocalization and the higher push-pull character of the benzoxazole-π-bridge-crown ether system, resulting in a set of compounds that excelled in tryptophan, the most fluorescent natural amino acid (with a fluorescence quantum yield of 0.14) [34]. Therefore, this observation is of interest for the future incorporation of these unnatural amino acids into bioinspired systems such as peptide/protein structures for biological assays based on fluorescence spectroscopy, as it suggests that the interesting photophysical properties of the isolated amino acids can be preserved to yield fluorescent peptides for various applications. Our previous work in synthetic fluorescent amino acids showed that such amino acids could be incorporated into short sequences and the resulting peptides also displayed fluorescence and sensing ability [27]. Figure 2 shows the normalized absorption and fluorescence spectra of benzoxazolylalanines 3c-e, as representative examples, to better visualize the relationship between the nature of the π-bridge and the absorption and emission properties of this family of compounds.
Comparison of the absorption and fluorescence data of the new c azolyl-alanines 3a-e with previously reported benzoxazolyl-alanine substituents at position 2 of the benzoxale [25][26][27] revealed that the in ether units did not alter significantly the photophysical properties. M new unnatural amino acids displayed more interesting photophysica the extended intramolecular electron delocalization and the higher pu the benzoxazole-π-bridge-crown ether system, resulting in a set of c celled in tryptophan, the most fluorescent natural amino acid (with a tum yield of 0.14) [34]. Therefore, this observation is of interest for the f of these unnatural amino acids into bioinspired systems such as pe tures for biological assays based on fluorescence spectroscopy, as it s teresting photophysical properties of the isolated amino acids can be fluorescent peptides for various applications. Our previous work in s amino acids showed that such amino acids could be incorporated in and the resulting peptides also displayed fluorescence and sensing ab Figure 2 shows the normalized absorption and fluorescence spec alanines 3c-e, as representative examples, to better visualize the relati nature of the π-bridge and the absorption and emission properties of pounds.

Preliminary Chemosensing Studies
The novel benzoxazolyl-alanines 3a-e were evaluated as fluorim for the detection of different metal cations with biological and envir through preliminary chemosensory studies. These compounds consi nine core modified through the introduction of an extra UV-active an heterocycle at its side chain, which was expected to provide additiona variety of ions through the heterocyclic donor oxygen, nitrogen, and as improved photophysical properties for the chemosensing studies.
The fluorimetric behavior of compounds 3a-e in the presence of

Preliminary Chemosensing Studies
The novel benzoxazolyl-alanines 3a-e were evaluated as fluorimetric chemosensors for the detection of different metal cations with biological and environmental relevance through preliminary chemosensory studies. These compounds consisted of a phenylalanine core modified through the introduction of an extra UV-active and highly fluorescent heterocycle at its side chain, which was expected to provide additional binding sites for a variety of ions through the heterocyclic donor oxygen, nitrogen, and sulfur atoms as well as improved photophysical properties for the chemosensing studies.
The fluorimetric behavior of compounds 3a-e in the presence of selected cations was studied in acetonitrile by adding 10 equivalents of each cation to a solution of each compound. This amount is usually considered in preliminary qualitative chemosensing tests because it provides quick evidence of the sensitivity of the system being tested. Acetonitrile is an aprotic solvent widely used in these studies because it lacks the ability to establish hydrogen bonds with the analytes or sensing molecules. It was found that the compounds had different fluorimetric responses for different cations, showing a preference for interactions with mercury, lead, palladium, copper, and iron cations. Compound 3c exhibited marked fluorescence quenching upon interaction with Hg 2+ , Pb 2+ , and Pd 2+ and complete quenching with Fe 3+ (Figure 3c); compound 3d showed similar behavior, (Figure 3d); and compound 3e showed decreased fluorescence upon interaction with Hg 2+ , Pb 2+ , and Pd 2+ and complete quenching was seen in the presence of Cu 2+ and Fe 3+ (Figure 3e). Notably, compounds 3e-c were able to discriminate between iron cations in different oxidation states by remarkable and selective quenching of fluorescence upon interaction with Fe 3+ compared to interaction with Fe 2+ .
Molecules 2023, 28, x FOR PEER REVIEW 6 Acetonitrile is an aprotic solvent widely used in these studies because it lacks the a to establish hydrogen bonds with the analytes or sensing molecules. It was found th compounds had different fluorimetric responses for different cations, showing a p ence for interactions with mercury, lead, palladium, copper, and iron cations. Comp 3c exhibited marked fluorescence quenching upon interaction with Hg 2+ , Pb 2+ , and and complete quenching with Fe 3+ (Figure 3c); compound 3d showed similar beha ( Figure 3d); and compound 3e showed decreased fluorescence upon interaction with Pb 2+ , and Pd 2+ and complete quenching was seen in the presence of Cu 2+ and Fe 3+ (Figur Notably, compounds 3e-c were able to discriminate between iron cations in differen dation states by remarkable and selective quenching of fluorescence upon interaction Fe 3+ compared to interaction with Fe 2+ . Although there was a relationship between the ionic radius of the metals an crown cavity size (e.g., Li + bound preferably to 15-C-5 while K + bound to 18-C-6) [28 additional binding sites at the various heteroatoms of compounds 3a-e could be th for the marked interaction with the transition metals.
The recognition of this type of analyte in biological and environmental media the utmost importance, so the development of water-soluble probes is required [3 The new unnatural amino acid derivatives 3a-e were poorly water soluble in their tected form and metal cations are prone to strong solvation by water, imposing an getic barrier that inhibits sensing processes in aqueous solution. To circumvent these  Although there was a relationship between the ionic radius of the metals and the crown cavity size (e.g., Li + bound preferably to 15-C-5 while K + bound to 18-C-6) [28], the additional binding sites at the various heteroatoms of compounds 3a-e could be the key for the marked interaction with the transition metals.
The recognition of this type of analyte in biological and environmental media is of the utmost importance, so the development of water-soluble probes is required [35,36]. The new unnatural amino acid derivatives 3a-e were poorly water soluble in their protected form and metal cations are prone to strong solvation by water, imposing an energetic barrier that inhibits sensing processes in aqueous solution. To circumvent these limitations in the fluorogenic detection of metal cations in water, instead of mixtures with pure water, a common strategy is to use surfactants [37,38]. In the case of the anionic surfactant sodium dodecyl sulfate (SDS), it has been reported that optical chemosensors as well as metal cations can be embedded into the inner hydrophobic core of SDS micelles, allowing detection of metal cations in aqueous solution by changes in fluorescence [38].
Therefore, the fluorimetric response of compounds 3a-e was also tested in aqueous mixtures of SDS (20 mM, pH 7.5) solution with acetonitrile, 90:10 v/v. In fact, all compounds were completely soluble at a concentration of 1.0 × 10 −5 M. As before, changes in fluorescence were examined upon interaction with 10 and 20 equivalents of each cation. The use of a larger number of cation equivalents resulted in a more noticeable difference in the fluorimetric response. Interestingly, a selective fluorometric response was seen for Pd 2+ in SDS aqueous solutions for compounds 3a,c-e (Figure 4). Compound 3b was not included due to low fluorescence. For compounds 3a,c-e, the fluorescence quenching could be assigned to SDS-assisted internalization of Pd 2+ into the inner micellar core with subsequent interaction with the fluorescent probe.

R REVIEW 7 of 16
well as metal cations can be embedded into the inner hydrophobic core of SDS micelles, allowing detection of metal cations in aqueous solution by changes in fluorescence [38]. Therefore, the fluorimetric response of compounds 3a-e was also tested in aqueous mixtures of SDS (20 mM, pH 7.5) solution with acetonitrile, 90:10 v/v. In fact, all compounds were completely soluble at a concentration of 1.0 × 10 −5 M. As before, changes in fluorescence were examined upon interaction with 10 and 20 equivalents of each cation. The use of a larger number of cation equivalents resulted in a more noticeable difference in the fluorimetric response. Interestingly, a selective fluorometric response was seen for Pd 2+ in SDS aqueous solutions for compounds 3a,c-e (Figure 4). Compound 3b was not included due to low fluorescence. For compounds 3a,c-e, the fluorescence quenching could be assigned to SDS-assisted internalization of Pd 2+ into the inner micellar core with subsequent interaction with the fluorescent probe.

Spectrofluorimetric Titrations
Given the results obtained in the photophysical characterization and the preliminary chemosensing study, crown ether benzoxazolyl-alanines 3c-e were chosen as representative examples and their interaction with selected cations was evaluated through spectrofluorimetric titrations in acetonitrile.
It was found that benzoxazolyl-alanines 3c-e responded with decreased fluorescence intensity (a chelation enhancement of quenching, CHEQ effect) to increased concentrations of the tested metal cations and the sensitivity towards Fe 3+ was evident, since the addition of a low number of metal equivalents (2-10 equiv) resulted in the complete quenching of fluorescence ( Figure 5).

Spectrofluorimetric Titrations
Given the results obtained in the photophysical characterization and the preliminary chemosensing study, crown ether benzoxazolyl-alanines 3c-e were chosen as representative examples and their interaction with selected cations was evaluated through spectrofluorimetric titrations in acetonitrile.
It was found that benzoxazolyl-alanines 3c-e responded with decreased fluorescence intensity (a chelation enhancement of quenching, CHEQ effect) to increased concentrations of the tested metal cations and the sensitivity towards Fe 3+ was evident, since the addition of a low number of metal equivalents (2-10 equiv) resulted in the complete quenching of fluorescence ( Figure 5).  Fluorimetric titrations in acetonitrile were also conducted for compound 3e with Fe 2+ to confirm its ability to discriminate between Fe 3+ and Fe 2+ . Total fluorescence quenching was not reached even after the addition of a much larger number of equivalents of the metal cation (450 equiv for ca. 40% quenching) ( Figure 6).
olecules 2023, 28, x FOR PEER REVIEW Fluorimetric titrations in acetonitrile were also conducted for compound 3e w to confirm its ability to discriminate between Fe 3+ and Fe 2+ . Total fluorescence qu was not reached even after the addition of a much larger number of equivalen metal cation (450 equiv for ca. 40% quenching) ( Figure 6). Bearing in mind the behavior of benzoxazolyl-alanines 3c-e in aqueous sol the preliminary tests and the apparent selective response for Pd 2+ , the correspond orimetric titrations were performed in SDS (20 mM, pH 7.5)/acetonitrile (90:10) pound 3d. Upon the addition of increasing amounts of Pd 2+ , complete fluo quenching required 50 equiv of cation (Figure 7b). In comparison with titrations w in acetonitrile, which required 200 equiv for total loss of fluorescence (Figure 7a), still be considered an interesting result for chemosensing in aqueous mixtures. Bearing in mind the behavior of benzoxazolyl-alanines 3c-e in aqueous solution in the preliminary tests and the apparent selective response for Pd 2+ , the corresponding fluorimetric titrations were performed in SDS (20 mM, pH 7.5)/acetonitrile (90:10) for compound 3d. Upon the addition of increasing amounts of Pd 2+ , complete fluorescence quenching required 50 equiv of cation (Figure 7b). In comparison with titrations with Pd 2+ in acetonitrile, which required 200 equiv for total loss of fluorescence (Figure 7a), this can still be considered an interesting result for chemosensing in aqueous mixtures.
Bearing in mind the behavior of benzoxazolyl-alanines 3c-e in aqueous solution the preliminary tests and the apparent selective response for Pd 2+ , the corresponding fl orimetric titrations were performed in SDS (20 mM, pH 7.5)/acetonitrile (90:10) for com pound 3d. Upon the addition of increasing amounts of Pd 2+ , complete fluorescen quenching required 50 equiv of cation (Figure 7b). In comparison with titrations with P in acetonitrile, which required 200 equiv for total loss of fluorescence (Figure 7a), this c still be considered an interesting result for chemosensing in aqueous mixtures. This chelation-induced quenching of fluorescence was in accordance with previo reports on palladium chemosensors possessing crown ether moieties, which was tributed to energy transfer quenching of the π* emissive state through low-lying, met centered, unfilled d-orbitals for Pd 2+ [39]. Moreover, cooperative effects from the N and atoms of the benzoxazole and also the O or S atoms of the furan or thiophene bridges m have been in play, also acting as binding sites for palladium.
For benzoxazolyl-alanine 3d in SDS (20 mM, pH 7.5)/acetonitrile (90:10), the detecti limit (DL) for Pd 2+ was calculated using the equation DL = 3σ/slope method, where σ is t standard deviation of the fluorescent intensity of the analyte free solution and S is t slope of the linear plot of concentration-dependent fluorescence response [40]. It w found to be 5.81 μM, which was lower than the WHO threshold for palladium content drugs [47 μM (5 ppm) to 94 μM (10 ppm)] [41]. This chelation-induced quenching of fluorescence was in accordance with previous reports on palladium chemosensors possessing crown ether moieties, which was attributed to energy transfer quenching of the π* emissive state through low-lying, metal-centered, unfilled d-orbitals for Pd 2+ [39]. Moreover, cooperative effects from the N and O atoms of the benzoxazole and also the O or S atoms of the furan or thiophene bridges may have been in play, also acting as binding sites for palladium.
For benzoxazolyl-alanine 3d in SDS (20 mM, pH 7.5)/acetonitrile (90:10), the detection limit (DL) for Pd 2+ was calculated using the equation DL = 3σ/slope method, where σ is the standard deviation of the fluorescent intensity of the analyte free solution and S is the slope of the linear plot of concentration-dependent fluorescence response [40]. It was found to be 5.81 µM, which was lower than the WHO threshold for palladium content in drugs [47 µM (5 ppm) to 94 µM (10 ppm)] [41].
In order to understand the mode of coordination between compound 3d (as a representative example) and Pd 2+ , a Job's plot was constructed in SDS (20 mM, pH 7.5)/acetonitrile (90:10). As can be seen in Figure 8, compound 3d clearly formed a complex with Pd 2+ in a 1:1 stoichiometry.
olecules 2023, 28, x FOR PEER REVIEW 1 In order to understand the mode of coordination between compound 3d (as a sentative example) and Pd 2+ , a Job's plot was constructed in SDS (20 mM, pH 7.5)/a trile (90:10). As can be seen in Figure 8, compound 3d clearly formed a complex wi in a 1:1 stoichiometry.

Synthesis General
Melting points were measured using a Stuart SMP3 melting point apparatus. TLC analyses were carried out on 0.25 mm thick precoated silica plates (Merck Fertigplatten Kieselgel 60F 254 ) and spots were visualized under UV light. Chromatography on silica gel was carried out on Merck Kieselgel (230-240 mesh). NMR spectra were obtained on a Bruker Avance III 400 at an operating frequency of 400 MHz for 1 H and 100.6 MHz for 13 C, using the solvent peak as the internal reference at 25 • C. The solvents are indicated in parenthesis before the chemical shift values (δ relative to TMS and given in ppm). Assignments were supported by bidimensional heteronuclear correlation techniques. Infrared spectra were recorded on a BOMEM MB 104 spectrophotometer. Mass spectra were obtained at "C.A.C.T.I. Unidad de Espectrometria de Masas" at the University of Vigo, Spain. All commercially available reagents were used as received. We previously synthesized formylated azacrown ether 1a and protected 3-aminotyrosine 2 [24,30].

Synthesis of Formyl Crown Ethers 1c-e by Suzuki Coupling
General method for Suzuki coupling: In a round bottom flask under nitrogen atmosphere, 4 -bromobenzo-18-crown-6 ether (150 mg, 0.38 mmol) was dissolved in a mixture of 1,2-dimethoxyethane (6 mL) and deionized water (2 mL) at room temperature and boronic acid (0.46 mmol), tetrakis(triphenylphosphine)palladium(0) (27 mg, 0.023 mmol), and potassium carbonate (315 mg, 2.28 mmol) were added. The mixture was heated at 80 • C for about 24 h until the disappearance of the halide (checked by TLC). After cooling to room temperature, the mixture was transferred to an extraction funnel and saturated NaCl solution (10 mL) was added, followed by extraction with ethyl acetate (3 × 15 mL). The organic extracts were combined and washed with water (20 mL) and 10% aqueous NaOH (20 mL). The organic extract was dried over anhydrous magnesium sulfate, filtered, and evaporated to dryness. The crude extract was purified by column chromatography on silica gel using dichloromethane and mixtures of increasing polarity with methanol (up to DCM/MeOH, 9:1) as the eluent. The fractions containing the pure compound were combined and evaporated to dryness.

Synthesis of Crown Ether Benzoxazolyl-alanines 3a-e
General method for oxidative cyclization: In a round bottom flask, the formylated crown ethers 1a-e (1 equiv) and protected 3-aminotyrosine 2 (1 equiv) were dissolved in absolute ethanol (10 mL) and heated under reflux for 24 h. The mixture was evaporated to dryness and the imine (checked by 1 H NMR in CDCl 3 ) was obtained as a light brown oil, which did not undergo further purification. The oily imine was dissolved in DMSO (2 mL) and lead tetraacetate (3 equiv) was added, followed by stirring at room temperature for 3 days. After the addition of deionized water (10 mL), the mixture was extracted with ethyl acetate (3 × 10 mL). The organic extracts were combined, dried over anhydrous magnesium sulfate, filtered, and evaporated to dryness. The crude extract was purified by column chromatography on silica gel using dichloromethane and mixtures of increasing polarity with methanol (up to DCM/MeOH, 9:1) as the eluent. The fractions containing the pure compound were combined and evaporated to dryness (the NMR spectra are presented in the supplementary material).

Sensing Studies General
The UV-vis absorption spectra were obtained in acetonitrile solution (1.0 × 10 −5 M) using a Shimadzu UV/2501PC spectrophotometer and the fluorescence spectra were obtained using a Horiba FluoroMax-4 spectrofluorometer.

Conclusions
Considering the obtained results, it can be concluded that benzoxazolyl-alanines bearing crown ether moieties 3a-e are sensitive, although not selective, fluorimetric chemosensors in acetonitrile solution, and their sensory behavior is characterized by a variable decrease in the initial fluorescence intensity upon the addition of increasing amounts of different metal cations. Alanines 3c-e, which bear a benzo-18-crown-6 ether, gave a noteworthy response for trivalent iron, needing between 2 to 10 equivalents of the metal cation for complete quenching.
Bearing in mind the interest in developing chemosensors able to display selective optical responses in aqueous mixtures, solutions of alanines 3c-e in aqueous SDS (20 mM, pH 7.5) with acetonitrile (90:10 v/v) demonstrated a selective response in the presence of Pd 2+ through marked fluorescence quenching, with a low detection limit of 5.81 µM. The encouraging results in terms of photophysical and metal ion sensing properties of these compounds opens up the possibility for their use in the assembly of peptides with chemosensory/probing abilities.

Conflicts of Interest:
The authors declare no conflict of interest.
Sample Availability: Not applicable.