Recent Advances in Catalytic and Technology-Driven Radical Addition to N,N-Disubstituted Iminium Species

Recently, radical chemistry has grown exponentially in the toolbox of organic synthetic chemists. Upon the (re)introduction of modern catalytic and technology-driven strategies, the implementation of highly reactive radical species is currently facilitated while expanding the scope of numerous synthetic methodologies. In this context, this review intends to cover the recent advances in radical-based transformations of N,N-disubstituted iminium substrates that encompass unique reactivities with respect to imines or protonated iminium salts. In particular, we have focused on the literature concerning the dipole type substrates, such as nitrones or azomethine imines, together with the chemistry of N+-X− (X = O, NR) azaarenium dipoles, which proved to be very versatile platforms in that field of research. The N-alkylazaarenium salts were been considered, which demonstrated specific reactivity profiles in radical chemistry.


Introduction
While radical chemistry has been an active and highly creative field of research for a long time, the last decade has testified an increased amount of published work highlighting a renewed attention of the synthetic chemist community and even some, a priori, nonspecialists to this field [1]. Needless to say, the unique and complementary selectivity of radical processes versus ionic-based transformations, together with the opportunity to perform functional group-tolerant-or even protective group-free-transformations, has elicited curiosity of organic chemists in quest of more expeditious syntheses. However, the evolution of the initial use of stochiometric, and sometimes toxic radical reaction promoters to catalytic radical sequences has established the foundations to allow a larger community to embrace radical chemistry as a potentially more sustainable strategy for the construction and functionalization of complex molecules, even in late stages of a synthetic plan. The progresses in catalytic metal-based redox approaches first contributed to this evolution [2], but the more recent (re)emergence of technology-driven single-electron transfer (SET) processes has accelerated new discoveries in that field with, at the forefront, visible light photoredox catalysis [3]. Even though the real classification of electrosynthesis as a catalytic methodology deserves discussions with regard to the tactic used [4][5][6], the modern evolution of organic electrochemistry and electrocatalysis, in connection with the availability of user-friendly apparatus [7], has boosted the technique as a tool of choice for radically initiated processes as well [8][9][10][11].
This wave of radical chemistry has also led to a large array of investigations aiming at getting insight into reactivity issues while improving the scope and selectivity of functional group transformations. In that domain, the formal addition reaction to imines through radical processes has met an enormous amount of studies due to the ubiquitous presence of amine motifs within naturally occurring and bioactive compounds [12][13][14]. Generally speaking, the imine functional group undergoes a C-C bond formation (Figure 1, case A) albeit an addition to the nitrogen atom for C-N bond formation is also encountered 1, case A) albeit an addition to the nitrogen atom for C-N bond formation is also encountered in few cases, depending on stereoelectronic effect and whether the reaction is performed under an inter-or intramolecular fashion [13]. The imine derivatives such as hydrazines, alkoxyamines, precursors with an electro-withdrawing group on the nitrogen atom, etc., were preferentially used due to favorable stabilization of aminyl radical intermediates obtained after the first addition step. Furthermore, it has been shown that these imine compounds could be activated by means of, at least, a stochiometric amount of a Brønsted or Lewis acid to accelerate the regioselective C-C bond construction through iminium intermediates, and asymmetric sequences were proven when these acids were chiral ( Figure 1, case B, LA* or H + *). If one recognized an iminium motif embedded within a heterocyclic architecture, then the so-called Minisci reaction occurs on protonated azaarenes [15,16]. This strategy has met important successes for the formal C-H functionalization event, albeit facing the C2 versus C4 regioselectivity issue (Figure 1, Case C). The addition of carbon-centered radicals to iminium or cationic azaarene has been discussed by Opatz and colleagues in an insightful review showing how orbital interactions play a key role in the efficiency of radical addition processes both in terms of rate and regioselectivity [14]. In other words, the interaction between the SOMO (singly occupied molecular orbital) species, considered as nucleophiles, and the low lying LUMO (lowest unoccupied molecular orbital) of iminium species is energetically favorable under the activation with either Brønsted or Lewis acids (Figure 1). Following a similar activation model ( Figure 2), several addition sequences of radical species to N-alkoxy and N-amine azaarenium platform molecules (R 1 = OR, NR2) emerged in the literature as powerful functionalization strategies showing that the regioselectivity issue highly depends on the architecture and substitution pattern of the heterocycles. This field of research was covered by very instructive recent reviews [17][18][19][20][21]. In this review, we intend to cover the recent evolution of the catalytic and technologydriven addition of radical species to iminium and azaarenium compounds having a trisubstituted nitrogen atom (Figure 2, R 1 ≠ H). In a complementary point of view of what has been covered in the literature, we will hereby focus on both dipole derivatives (N-R 1 with R 1 = Y − ) and N-alkyl azaarenium salt, which has never been covered in a unified fashion despite some sporadic examples being found in previous reviews on pyridine derivatives [17][18][19][20][21][22][23]. We essentially cover the literature from 2015, since the Opatz's review has already discussed this field of research before [14]. Worthy of note, the metal-catalyzed C-H bond functionalization involving a radical process, which is triggered by a metal insertion into the C-H bond, is outside the scope of this review. Likewise, the in situ formation and use of iminium through the oxidation of the corresponding amine as starting material, for instance, will not be considered herein. For the sake of comparison, this review is organized by type of iminium structure to highlight the differences and complementarities of both the synthetic strategy and the technology employed for a given architecture with a focus on catalytic cycle mechanisms whenever possible.

Nitrones
Nitrones are versatile platform molecules involved in cycloaddition or nucleophilic addition reactions of polar reagents [24]. Nitrones are known to be potent radical trap leading to rather stable aminoxyl radical intermediates sometimes used for mechanistic investigations. Early contributions showed that stochiometric metal-based radical transformations are also allowed, particularly making use of samarium as a SET reagent [24]. In the mid-2010s, photochemical or photoredox catalytic strategies appeared and opened new ways to functionalize these types of dipoles ( Figure 3). In this review, we intend to cover the recent evolution of the catalytic and technologydriven addition of radical species to iminium and azaarenium compounds having a trisubstituted nitrogen atom ( Figure 2, R 1 = H). In a complementary point of view of what has been covered in the literature, we will hereby focus on both dipole derivatives (N-R 1 with R 1 = Y − ) and N-alkyl azaarenium salt, which has never been covered in a unified fashion despite some sporadic examples being found in previous reviews on pyridine derivatives [17][18][19][20][21][22][23]. We essentially cover the literature from 2015, since the Opatz's review has already discussed this field of research before [14]. Worthy of note, the metal-catalyzed C-H bond functionalization involving a radical process, which is triggered by a metal insertion into the C-H bond, is outside the scope of this review. Likewise, the in situ formation and use of iminium through the oxidation of the corresponding amine as starting material, for instance, will not be considered herein. For the sake of comparison, this review is organized by type of iminium structure to highlight the differences and complementarities of both the synthetic strategy and the technology employed for a given architecture with a focus on catalytic cycle mechanisms whenever possible.

Nitrones
Nitrones are versatile platform molecules involved in cycloaddition or nucleophilic addition reactions of polar reagents [24]. Nitrones are known to be potent radical trap leading to rather stable aminoxyl radical intermediates sometimes used for mechanistic investigations. Early contributions showed that stochiometric metal-based radical transformations are also allowed, particularly making use of samarium as a SET reagent [24]. In the mid-2010s, photochemical or photoredox catalytic strategies appeared and opened new ways to functionalize these types of dipoles ( Figure 3). For the sake of comparison, this review is organized by type of iminium structure to highlight the differences and complementarities of both the synthetic strategy and the technology employed for a given architecture with a focus on catalytic cycle mechanisms whenever possible.

Nitrones
Nitrones are versatile platform molecules involved in cycloaddition or nucleophilic addition reactions of polar reagents [24]. Nitrones are known to be potent radical trap leading to rather stable aminoxyl radical intermediates sometimes used for mechanistic investigations. Early contributions showed that stochiometric metal-based radical transformations are also allowed, particularly making use of samarium as a SET reagent [24]. In the mid-2010s, photochemical or photoredox catalytic strategies appeared and opened new ways to functionalize these types of dipoles ( Figure 3). The photoirradiation of nitrones usually leads to photoexcited counterparts that cyclize into oxaziridine. In order to overcome this pathway, Itoh, Suga and colleagues proposed in 2015 a photoinduced electron transfer (PET) process of a photoexcited nitrone 2 and a tertiary amine 1 (Scheme 1). Upon irradiation with a UV-LED, in acetone as solvent, the authors demonstrated a smooth addition of the amine 1a to 2a, leading to the formation of adduct 3a in 61% yield after 2.5 h. Interestingly, in the presence of a catalytic amount of benzophenone (BP, 10 mol%) as a photosensitizer, the addition reaction was accelerated and took place with 2a in only 0.7 h to deliver 3a in 62% yield. A screening of conditions revealed the 4,4′-dichlorobenzophenone (DCBP) as a more efficient photosensitizer allowing an improved yield of 76% (3a) after 1.3 h. The photoirradiation of nitrones usually leads to photoexcited counterparts that cyclize into oxaziridine. In order to overcome this pathway, Itoh, Suga and colleagues proposed in 2015 a photoinduced electron transfer (PET) process of a photoexcited nitrone 2 and a tertiary amine 1 (Scheme 1). Upon irradiation with a UV-LED, in acetone as solvent, the authors demonstrated a smooth addition of the amine 1a to 2a, leading to the formation of adduct 3a in 61% yield after 2.5 h. Interestingly, in the presence of a catalytic amount of benzophenone (BP, 10 mol%) as a photosensitizer, the addition reaction was accelerated and took place with 2a in only 0.7 h to deliver 3a in 62% yield. A screening of conditions revealed the 4,4 -dichlorobenzophenone (DCBP) as a more efficient photosensitizer allowing an improved yield of 76% (3a) after 1.3 h. Under these optimized conditions, the amino alkylation reaction was successfully applied to various nitrones with aryl (3b-c) or heteroaryl (3d) moieties (Scheme 1). Importantly, as testified with N-benzyl products 3e, the selective generation and reaction of the primary α-aminoalkyl radical was observed according to Lewis's stereoelectronic rules for stilbene-amine mixture [25], although this selectivity issue was more balanced with cyclic substrates in light of the obtained mixture of products 3f and 3g with a pyrrolidine structure. The use of amine bearing an ester group was also tolerated for the C-C Under these optimized conditions, the amino alkylation reaction was successfully applied to various nitrones with aryl (3b-c) or heteroaryl (3d) moieties (Scheme 1). Importantly, as testified with N-benzyl products 3e, the selective generation and reaction of the primary α-aminoalkyl radical was observed according to Lewis's stereoelectronic rules for stilbene-amine mixture [25], although this selectivity issue was more balanced with cyclic substrates in light of the obtained mixture of products 3f and 3g with a pyrrolidine structure. The use of amine bearing an ester group was also tolerated for the C-C bond formation towards the construction of 3h.
At first glance, considering that the direct irradiation of the nitrone 2a with UV light triggered the formation of the addition product 3a (Scheme 2), nitrone-sensitized photopromoted process was envisaged as a background reaction. However, the acceleration of the transformation in the presence of 4,4′-dichlorobenzophenone led the authors to propose an alternative DCBP-sensitized photocatalytic sequence. Upon irradiation of DCBP, the triplet 3 DCBP* was generated after intersystem crossing (ISC) from 1 DCBP*. This gave rise to the formation of ketyl and α-aminoalkyl radicals A and B, through both PET and proton exchange events. Then, the α-aminoalkylation of B occured to nitrone 2a to afford the aminoxyl radical intermediate C, providing, eventually, the addition product 3a after a SET from ketyl A (recycling DCBP thereby) and proton exchange. The authors also assumed, in parallel, a radical chain process that would take place from the radical intermediate C, likely able to form the α-aminoalkyl radical B by hydrogen atom transfer (HAT), en route to the addition reaction of B to nitrone 1a to construct 3a via C. Scheme 2. Proposed mechanism for the photoredox-catalyzed reaction of α-aminoalkyl derivatives with nitrones. Scheme 2. Proposed mechanism for the photoredox-catalyzed reaction of α-aminoalkyl derivatives with nitrones.
Following this pioneering contribution, Xia and colleagues published a formal (3 + 2) cycloaddition between β-methyl styrene derivative 4 and N-aryl nitrones 2 along with photoredox conditions thanks to a catalytic amount of pyrylium salt Cat3 and blue LED irradiation (Scheme 3) [26]. Under these conditions, the major diastereoisomer 5 was obtained with aryl nitrones 5a-e regardless of the substitution pattern, but lower yields and dr were observed with an alkyl nitrone. Various N-aryl nitrones 2 were tolerated to provide the corresponding products 5f-h with moderate to good diastereoselectivities, but N-alkyl homologues were not tolerated under these conditions. Several functionalized β-methyl styrene derivatives 4 could be employed, to afford 5i-k for instances, likewise for indene or unsubstituted styrene derivatives. In a complementary manner, the regioselectivity of this formal dipolar cycloaddition towards the formation of 5 was inverted with respect to the adducts obtained under classical thermal conditions. In a similar fashion, the authors demonstrated the addition reaction of indole [26].
As far as the mechanism is concerned, the excited Cat3* oxidized the alkene 4 into radical cation A, which underwent a regioselective addition of a nitrone 2 into intermediate B (Scheme 4) [26]. Then, a diastereoselective cyclization occurred and the obtained intermediate C was reduced into product 5 by transient Cat3 • allowing the regeneration of Cat3. The fact that either (E)-or (Z)-β-methyl styrene precursors 4 led to similar diastereoselectivity was testified by a stepwise mechanism for the formal cycloaddition. On the other hand, a quantum yield measurement (Φ = 9) tended to show a radical chain process. Then, the authors proposed that radical cation C oxidized an alkene 4 into A allowing to initiate another catalytic cycle via radical B.
vide the corresponding products 5f-h with moderate to good diastereoselectivities, but N-alkyl homologues were not tolerated under these conditions. Several functionalized βmethyl styrene derivatives 4 could be employed, to afford 5i-k for instances, likewise for indene or unsubstituted styrene derivatives. In a complementary manner, the regioselectivity of this formal dipolar cycloaddition towards the formation of 5 was inverted with respect to the adducts obtained under classical thermal conditions. In a similar fashion, the authors demonstrated the addition reaction of indole [26].
In 2008, the group of Dilman extended the scope of radical addition to nitrones thanks to the versatility of photoredox catalysis (Scheme 5) [27]. Upon blue-LED irradiation, with a small amount of iridium complex Cat4 (0.5 mol%), the addition of iodofluorinated compounds 6 was successfully performed to provide a wide array of hydroxylamines 7. For instance, several types of fluorinated pendants (7a-c) could be introduced on either N-alkylated (7d-g) or N-arylated (7h) nitrone substrates all derived from aromatic or aliphatic aldehydes (R 1 ). Even heterocycle-derived nitrones, such as an isoquinoline structure, were tolerated to form, e.g., tetrahydroquinoline 7i in good yields. Only some limitations were encountered when highly hindered substrates were used, such as the one having a tert-butyl pendant or a disubstituted pattern, leading to decreased yields. Scheme 4. Proposed mechanism for the photoredox-catalyzed formal (3 + 2) cycloaddition between β-methyl styrene derivatives and nitrones.
In 2008, the group of Dilman extended the scope of radical addition to nitrones thanks to the versatility of photoredox catalysis (Scheme 5) [27]. Upon blue-LED irradiation, with a small amount of iridium complex Cat4 (0.5 mol%), the addition of iodofluorinated compounds 6 was successfully performed to provide a wide array of hydroxylamines 7. For instance, several types of fluorinated pendants (7a-c) could be introduced on either Nalkylated (7d-g) or N-arylated (7h) nitrone substrates all derived from aromatic or aliphatic aldehydes (R 1 ). Even heterocycle-derived nitrones, such as an isoquinoline structure, were tolerated to form, e.g., tetrahydroquinoline 7i in good yields. Only some limitations were encountered when highly hindered substrates were used, such as the one having a tert-butyl pendant or a disubstituted pattern, leading to decreased yields.
During mechanistic investigations, the authors showed that the presence of ascorbic acid as a reductant was key for the success of this sequence (Scheme 6) [27]. It was proposed, at first, as a reductive quenching of the excited photocatalyst Cat4* by ascorbic acid (likely its negative form Asc − ) to provide the Ir(II) species Cat4 −1 (E = Ir(II)/Ir(III), −1.51 V) likely able to reduce the R f -I 6 (E red = −1.22 to −1.77 V) into the corresponding radical R f • (Scheme 6). Then, a radical addition reaction to nitrones 2 occurred to deliver the aminoxyl radical intermediate A, which can be reduced by the excess of Asc-H. Importantly, the reduction potential of −2 V estimated for nitrones 2 ruled out the first redox-reaction of these reagents.
Molecules 2023, 28, 1071 6 of 46 inated compounds 6 was successfully performed to provide a wide array of hydroxylamines 7. For instance, several types of fluorinated pendants (7a-c) could be introduced on either N-alkylated (7d-g) or N-arylated (7h) nitrone substrates all derived from aromatic or aliphatic aldehydes (R 1 ). Even heterocycle-derived nitrones, such as an isoquinoline structure, were tolerated to form, e.g., tetrahydroquinoline 7i in good yields. Only some limitations were encountered when highly hindered substrates were used, such as the one having a tert-butyl pendant or a disubstituted pattern, leading to decreased yields. During mechanistic investigations, the authors showed that the presence of ascorbic acid as a reductant was key for the success of this sequence (Scheme 6) [27]. It was proposed, at first, as a reductive quenching of the excited photocatalyst Cat4* by ascorbic acid (likely its negative form Asc − ) to provide the Ir(II) species Cat4 −1 (E = Ir(II)/Ir(III), −1.51 V) likely able to reduce the Rf-I 6 (Ered = −1.22 to −1.77 V) into the corresponding radical Rf • (Scheme 6). Then, a radical addition reaction to nitrones 2 occurred to deliver the aminoxyl radical intermediate A, which can be reduced by the excess of Asc-H. Importantly, the Scheme 5. Photoredox-catalyzed reaction of fluoroalkyl iodide derivatives with nitrones.
Molecules 2023, 28, x FOR PEER REVIEW 7 of 50 reduction potential of −2 V estimated for nitrones 2 ruled out the first redox-reaction of these reagents.

Scheme 6.
Proposed mechanism for the photoredox-catalyzed reaction of fluoroalkyl iodide derivatives with nitrones.
Zhang, Lu and Huang and coworkers have made a breakthrough in 2009 by implementing the catalytic radical transformation of nitrones to the asymmetric synthesis level (Scheme 7) [28,29]. Motivated by the presence of the vicinal amino alcohol motif within a myriad of bioactive compounds, the authors demonstrated a photoredox-based pinacol type coupling between aromatic aldehydes 8 and nitrones 2 in the presence of Ru(bpy)3(PF6)3 Cat5 (2 mol%) and the use of a 35 W compact fluorescent lamp. The corresponding coupling products 9 were obtained in good to excellent yields and good diastereoselectivity in most cases in favor of the syn isomer. Through a dual catalysis approach, it was shown that a catalytic amount of scandium Lewis acid together with the Feng's chiral N,N'-dioxides ligand L1 not only facilitate the C-C bond formation but also allows for a highly enantioselective process. This asymmetric sequence worked with various aromatic aldehydes 2 to afford either acyclic (9a-b) or cyclic (9c-d) amino alcohol compounds, even when the nitrone precursor was embedded within the cyclic framework (9e). The last case necessitated the use of i-Pr2EtN instead of TEEDA (N,N,N',N'-tetraethylethylenediamine) as an amine and a slightly modified ligand to optimize the enantiomeric excess. Scheme 6. Proposed mechanism for the photoredox-catalyzed reaction of fluoroalkyl iodide derivatives with nitrones.
Zhang, Lu and Huang and coworkers have made a breakthrough in 2009 by implementing the catalytic radical transformation of nitrones to the asymmetric synthesis level (Scheme 7) [28,29]. Motivated by the presence of the vicinal amino alcohol motif within a myriad of bioactive compounds, the authors demonstrated a photoredox-based pinacol type coupling between aromatic aldehydes 8 and nitrones 2 in the presence of Ru(bpy) 3 (PF 6 ) 3 Cat5 (2 mol%) and the use of a 35 W compact fluorescent lamp. The corresponding coupling products 9 were obtained in good to excellent yields and good diastereoselectivity in most cases in favor of the syn isomer. Through a dual catalysis approach, it was shown that a catalytic amount of scandium Lewis acid together with the Feng's chiral N,N -dioxides ligand L1 not only facilitate the C-C bond formation but also allows for a highly enantioselective process. This asymmetric sequence worked with various aromatic aldehydes 2 to afford either acyclic (9a-b) or cyclic (9c-d) amino alcohol compounds, even when the nitrone precursor was embedded within the cyclic framework (9e). The last case necessitated the use of i-Pr 2 EtN instead of TEEDA (N,N,N ,N -tetraethylethylenediamine) as an amine and a slightly modified ligand to optimize the enantiomeric excess.
The radical nature of the mechanism was proven by both radical clock reactions using cyclopropyl ketone precursors 8 and an inhibition reaction observed in the presence of TEMPO [28,29]. Accordingly, it was assumed that an active Ru(bpy) 3 + complex was formed after a reductive quenching of the corresponding Ru(bpy) 3 2+ by the Hünig base. The nitrone 2b was engaged in a complex A between the Lewis acid (La) (lanthanide metal embedded with the chiral ligand L1) and the aldehyde 8a (Scheme 8). This resulted in a Lewis acid activation of the aldehyde 8a (half-wave potential changed from −1.86 V to −0.62 V vs. SCE (saturated calomel electrode) + Sc(OTf) 3 ), which underwent a reductive SET to afford the ketyl radical intermediate B. Following a Zimmerman-Traxler-type transition state, supported by DFT calculation, a C-C bond construction took place to give rise to cation radical C, leading to the formation of the final product 9a thanks to the hydrogen abstraction event from previously formed i-Pr 2 EtN + . Worthy of note, this reductive SET-triggered process upon photoredox conditions was complementary to the homologous samarium-based sequence, which usually started from the reduction of the nitrone 2 counterpart [28,29]. menting the catalytic radical transformation of nitrones to the asymmetric synthesis level (Scheme 7) [28,29]. Motivated by the presence of the vicinal amino alcohol motif within a myriad of bioactive compounds, the authors demonstrated a photoredox-based pinacol type coupling between aromatic aldehydes 8 and nitrones 2 in the presence of Ru(bpy)3(PF6)3 Cat5 (2 mol%) and the use of a 35 W compact fluorescent lamp. The corresponding coupling products 9 were obtained in good to excellent yields and good diastereoselectivity in most cases in favor of the syn isomer. Through a dual catalysis approach, it was shown that a catalytic amount of scandium Lewis acid together with the Feng's chiral N,N'-dioxides ligand L1 not only facilitate the C-C bond formation but also allows for a highly enantioselective process. This asymmetric sequence worked with various aromatic aldehydes 2 to afford either acyclic (9a-b) or cyclic (9c-d) amino alcohol compounds, even when the nitrone precursor was embedded within the cyclic framework (9e). The last case necessitated the use of i-Pr2EtN instead of TEEDA (N,N,N',N'-tetraethylethylenediamine) as an amine and a slightly modified ligand to optimize the enantiomeric excess. The radical nature of the mechanism was proven by both radical clock reactions using cyclopropyl ketone precursors 8 and an inhibition reaction observed in the presence of TEMPO [28,29]. Accordingly, it was assumed that an active Ru(bpy)3 + complex was Scheme 7. Photoredox-catalyzed reaction of aldehydes with nitrones. Following a Zimmerman-Traxler-type transition state, supported by DFT calculation, a C-C bond construction took place to give rise to cation radical C, leading to the formation of the final product 9a thanks to the hydrogen abstraction event from previously formed i-Pr2EtN + . Worthy of note, this reductive SETtriggered process upon photoredox conditions was complementary to the homologous samarium-based sequence, which usually started from the reduction of the nitrone 2 counterpart [28,29]. Scheme 8. Proposed mechanism for the photoredox-catalyzed reaction of aldehydes with nitrones.
As aforementioned [25], Itoh, Suga demonstrated the α-aminoalkylation reaction of nitrones 2 by using a UV-excited photosensitizer protocol (see Scheme 1). In 2019, the group of Xia and Pei-Qiang implemented this sequence while expanding the scope under visible light photoredox catalysis (Scheme 9) [30]. Under these safer and more efficient conditions, and in the presence of a catalytic amount of iridium complex Cat4 (1 mol%) and K2HPO4 as a base in DMSO, the addition of amines 10 was observed and provided a smooth formation of diamines 11 in good-to-excellent yields. Under these conditions, the synthesis of various alkyl or aryl derived nitrones 11a-c was achieved and various aniline derivatives were tolerated (11d-f). Cyclic nitrones could also be engaged in this transformation, leading to the corresponding hydroxylamines 11g and 11h, with a high diastereoisomeric ratio in the last case due to the steric influence of the Obn group at the α-position. Scheme 8. Proposed mechanism for the photoredox-catalyzed reaction of aldehydes with nitrones.
As aforementioned [25], Itoh, Suga demonstrated the α-aminoalkylation reaction of nitrones 2 by using a UV-excited photosensitizer protocol (see Scheme 1). In 2019, the group of Xia and Pei-Qiang implemented this sequence while expanding the scope under visible light photoredox catalysis (Scheme 9) [30]. Under these safer and more efficient conditions, and in the presence of a catalytic amount of iridium complex Cat4 (1 mol%) and K 2 HPO 4 as a base in DMSO, the addition of amines 10 was observed and provided a smooth formation of diamines 11 in good-to-excellent yields. Under these conditions, the synthesis of various alkyl or aryl derived nitrones 11a-c was achieved and various aniline derivatives were tolerated (11d-f). Cyclic nitrones could also be engaged in this transformation, leading to the corresponding hydroxylamines 11g and 11h, with a high diastereoisomeric ratio in the last case due to the steric influence of the Obn group at the α-position.
The authors proposed a catalytic pathway that commenced by the oxidation of the aniline 10 by the excited iridium(III)* complex Cat4* delivering, after deprotonation of the radical cation intermediate A, the radical species B (Scheme 10) [30]. The radical B added to nitrone 2 to furnish aminoxyl radical intermediate C, which eventually underwent a reductive SET by iridium (II) regenerating the initial catalyst Ir(III) and providing product 11 after protonation. On the other hand, the authors did not exclude that aminoxyl radical C could lead to a hydrogen abstraction of the radical cation A, also providing the reactive radical B after an Ir(II) reduction event. Scheme 10. Proposed mechanism for the photoredox-catalyzed reaction of N-aromatic α-aminoalkyl derivatives with nitrones.
The intermolecular formal (3 + 2) cycloaddition was demonstrated by Xia and colleagues upon photoredox catalysis in 2017 (see Scheme 3) [26]. Motivated by the elaboration of chromenoisoxazolidine derivatives, a core structure of bioactive compounds, Moura-Letts and coworkers tackled the intramolecular process, which required different conditions (Scheme 11) [31]. The authors showed that well-designed nitrone-alkene platforms 12 underwent an intramolecular dipolar cycloaddition reaction, giving rise to the formation of the tricyclic products 13 in high diastereo-and regioselectivity. This transformation required the use of 5 mol% of photocatalyst Ru(bpy)3Cl2 Cat6 (a lower amount gave lower yields) in acetonitrile and a white LED as a source of light. Although the reaction could also be performed under thermic conditions, the photoredox approach proved to be more efficient (providing a cleaner reaction) and proceeded at room temperature. A large variety of chromenoisoxazolidine derivatives were thereby synthesized with various substitution pattern on the aromatic (13a-d) and the allylic (13i-l) moieties. Ketonederived nitrones (R 2 = Me) were also tolerated to allow the construction of products 13eh. The authors proposed a catalytic pathway that commenced by the oxidation of the aniline 10 by the excited iridium(III)* complex Cat4* delivering, after deprotonation of the radical cation intermediate A, the radical species B (Scheme 10) [30]. The radical B added to nitrone 2 to furnish aminoxyl radical intermediate C, which eventually underwent a reductive SET by iridium (II) regenerating the initial catalyst Ir(III) and providing product 11 after protonation. On the other hand, the authors did not exclude that aminoxyl radical C could lead to a hydrogen abstraction of the radical cation A, also providing the reactive radical B after an Ir(II) reduction event.
The authors proposed a catalytic pathway that commenced by the oxidation of the aniline 10 by the excited iridium(III)* complex Cat4* delivering, after deprotonation of the radical cation intermediate A, the radical species B (Scheme 10) [30]. The radical B added to nitrone 2 to furnish aminoxyl radical intermediate C, which eventually underwent a reductive SET by iridium (II) regenerating the initial catalyst Ir(III) and providing product 11 after protonation. On the other hand, the authors did not exclude that aminoxyl radical C could lead to a hydrogen abstraction of the radical cation A, also providing the reactive radical B after an Ir(II) reduction event. The intermolecular formal (3 + 2) cycloaddition was demonstrated by Xia and colleagues upon photoredox catalysis in 2017 (see Scheme 3) [26]. Motivated by the elaboration of chromenoisoxazolidine derivatives, a core structure of bioactive compounds, Moura-Letts and coworkers tackled the intramolecular process, which required different conditions (Scheme 11) [31]. The authors showed that well-designed nitrone-alkene platforms 12 underwent an intramolecular dipolar cycloaddition reaction, giving rise to the formation of the tricyclic products 13 in high diastereo-and regioselectivity. This transformation required the use of 5 mol% of photocatalyst Ru(bpy)3Cl2 Cat6 (a lower amount gave lower yields) in acetonitrile and a white LED as a source of light. Although the reaction could also be performed under thermic conditions, the photoredox approach proved to be more efficient (providing a cleaner reaction) and proceeded at room temperature. A large variety of chromenoisoxazolidine derivatives were thereby synthesized with various substitution pattern on the aromatic (13a-d) and the allylic (13i-l) moieties. Ketonederived nitrones (R 2 = Me) were also tolerated to allow the construction of products 13eh.
The intermolecular formal (3 + 2) cycloaddition was demonstrated by Xia and colleagues upon photoredox catalysis in 2017 (see Scheme 3) [26]. Motivated by the elaboration of chromenoisoxazolidine derivatives, a core structure of bioactive compounds, Moura-Letts and coworkers tackled the intramolecular process, which required different conditions (Scheme 11) [31]. The authors showed that well-designed nitrone-alkene platforms 12 underwent an intramolecular dipolar cycloaddition reaction, giving rise to the formation of the tricyclic products 13 in high diastereo-and regioselectivity. This transformation required the use of 5 mol% of photocatalyst Ru(bpy) 3 Cl 2 Cat6 (a lower amount gave lower yields) in acetonitrile and a white LED as a source of light. Although the reaction could also be performed under thermic conditions, the photoredox approach proved to be more efficient (providing a cleaner reaction) and proceeded at room temperature. A large variety of chromenoisoxazolidine derivatives were thereby synthesized with various substitution pattern on the aromatic (13a-d) and the allylic (13i-l) moieties. Ketone-derived nitrones (R 2 = Me) were also tolerated to allow the construction of products 13e-h. Concerning the mechanism, it was demonstrated that the sequence required light to proceed, which led the researchers to propose a redox-neutral catalytic cycle (Scheme 12) [31]. Upon white light irradiation, the photocatalyst Ru(bpy)3 2+ (Cat6) was excited to *Ru(bpy)3 2+ being able to oxidize the nitrone 12a into the aminoxyl radical A, which triggered the formal (3 + 2) cycloaddition into B. Then, the thus-formed Ru(bpy)3 1+ complex secured a reductive SET, recycling the Ru(bpy)3 2+ photocatalyst and furnishing the product 13a. Scheme 12. Proposed mechanism for the photoredox-catalyzed intramolecular formal (3 + 2) cycloaddition.
The group of Dilman developed the 4-tetrafluoropyridinylthio (PyfS) moiety, as a new redox active functional group for the generation of fluorinated radical (Rf • ) through the formation of the radical anion A (Scheme 13). The PyfS-functional group was easily installed onto difluorinated alkenes 14 making use of the thiol precursor 15 (PyfSH) under an electron proton transfer protocol to afford 16. Thanks to the previously developed conditions for iodofluorinated compounds 6 in the presence of an iridium photocatalyst Cat4 (see Scheme 5) [27], an efficient addition of PyfS-Rf 16 precursor to nitrones 2 occurred to provide a series of difluorinated hydroxylamines 7 (e.g., compounds 7j-l). The photocatalytic mechanism is likely reminiscent to the one described with iodofluorinated compounds 6 (see Scheme 6). Concerning the mechanism, it was demonstrated that the sequence required light to proceed, which led the researchers to propose a redox-neutral catalytic cycle (Scheme 12) [31]. Upon white light irradiation, the photocatalyst Ru(bpy) 3 2+ (Cat6) was excited to *Ru(bpy) 3
The group of Dilman developed the 4-tetrafluoropyridinylthio (PyfS) moiety, as a new redox active functional group for the generation of fluorinated radical (Rf • ) through the formation of the radical anion A (Scheme 13). The PyfS-functional group was easily installed onto difluorinated alkenes 14 making use of the thiol precursor 15 (PyfSH) under an electron proton transfer protocol to afford 16. Thanks to the previously developed conditions for iodofluorinated compounds 6 in the presence of an iridium photocatalyst Cat4 (see Scheme 5) [27], an efficient addition of PyfS-Rf 16 precursor to nitrones 2 occurred to provide a series of difluorinated hydroxylamines 7 (e.g., compounds 7j-l). The photocatalytic mechanism is likely reminiscent to the one described with iodofluorinated compounds 6 (see Scheme 6). The group of Dilman developed the 4-tetrafluoropyridinylthio (PyfS) moiety, as a new redox active functional group for the generation of fluorinated radical (R f • ) through the formation of the radical anion A (Scheme 13). The PyfS-functional group was easily installed onto difluorinated alkenes 14 making use of the thiol precursor 15 (PyfSH) under an electron proton transfer protocol to afford 16. Thanks to the previously developed conditions for iodofluorinated compounds 6 in the presence of an iridium photocatalyst Cat4 (see Scheme 5) [27], an efficient addition of PyfS-Rf 16 precursor to nitrones 2 occurred to provide a series of difluorinated hydroxylamines 7 (e.g., compounds 7j-l). The photocatalytic mechanism is likely reminiscent to the one described with iodofluorinated compounds 6 (see Scheme 6). The group of Paixão recently developed a couple of SET strategies to perform the addition of radical species to dipoles such as azomethine imines (vide infra) and nitrones (Scheme 14) [32,33]. They used the dihydropyridine 17a, which allowed the generation of a carbamoyl radical after the oxidative single electron transfer of the amine 17a secured by the excited photocatalyst Cat7 (4CzlPN) [33]. The authors proved the effectiveness of this carbamoylation protocol for the synthesis of three hydroxylamines 18a-c in good yields. This interesting redox sequence was much more developed on azomethine imines dipoles as discussed in the next chapter [33]. The oxidation decarboxylation sequence has emerged as a powerful strategy to generate alkyl radical species, a field in which naturally occurring and abundant α-amino acid derivatives proved to be versatile precursors [34]. In that vein, Huang and colleagues demonstrated that N-arylated α-amino acids 19 turned out to be able to add to nitrones 2 under blue LEDs irradiation in the presence of Ir[dF(CF3)ppy]2(dtbbpy)(PF6) Cat8 (1 mol%) (Scheme 15) [35]. Importantly, lithium carbonate as a base was mandatory for getting high yield showing that a deprotonated carboxylic acid (carboxylate) was likely the Scheme 13. Photoredox-catalyzed reaction of in situ-generated difluoroalkyl derivatives with nitrones.
The group of Paixão recently developed a couple of SET strategies to perform the addition of radical species to dipoles such as azomethine imines (vide infra) and nitrones (Scheme 14) [32,33]. They used the dihydropyridine 17a, which allowed the generation of a carbamoyl radical after the oxidative single electron transfer of the amine 17a secured by the excited photocatalyst Cat7 (4CzlPN) [33]. The authors proved the effectiveness of this carbamoylation protocol for the synthesis of three hydroxylamines 18a-c in good yields. This interesting redox sequence was much more developed on azomethine imines dipoles as discussed in the next chapter [33]. The group of Paixão recently developed a couple of SET strategies to perfo addition of radical species to dipoles such as azomethine imines (vide infra) and n (Scheme 14) [32,33]. They used the dihydropyridine 17a, which allowed the genera a carbamoyl radical after the oxidative single electron transfer of the amine 17a s by the excited photocatalyst Cat7 (4CzlPN) [33]. The authors proved the effective this carbamoylation protocol for the synthesis of three hydroxylamines 18a-c in yields. This interesting redox sequence was much more developed on azomethine dipoles as discussed in the next chapter [33]. The oxidation decarboxylation sequence has emerged as a powerful strategy erate alkyl radical species, a field in which naturally occurring and abundant αacid derivatives proved to be versatile precursors [34]. In that vein, Huang and coll demonstrated that N-arylated α-amino acids 19 turned out to be able to add to nitr under blue LEDs irradiation in the presence of Ir[dF(CF3)ppy]2(dtbbpy)(PF6) C mol%) (Scheme 15) [35]. Importantly, lithium carbonate as a base was mandatory f ting high yield showing that a deprotonated carboxylic acid (carboxylate) was lik The oxidation decarboxylation sequence has emerged as a powerful strategy to generate alkyl radical species, a field in which naturally occurring and abundant α-amino acid derivatives proved to be versatile precursors [34]. In that vein, Huang and colleagues demonstrated that N-arylated α-amino acids 19 turned out to be able to add to nitrones 2 under blue LEDs irradiation in the presence of Ir[dF(CF 3 )ppy] 2 (dtbbpy)(PF 6 ) Cat8 (1 mol%) (Scheme 15) [35]. Importantly, lithium carbonate as a base was mandatory for getting high yield showing that a deprotonated carboxylic acid (carboxylate) was likely the precursor involved in this decarboxylative process. In these conditions, a smooth photoredox-catalyzed decarboxylation triggered an addition sequence eventually leading to the formation of hydroxylamines 11. Various α-amino hydroxylamines having an alkyl or aryl pendant (11i-m) could be synthesized as well as products 11n-o originated from the ketone nitrones. On the other side, for instance, cyclic nitrones could be engaged in this transformation giving pyrrolidine hydroxylamines 11p and 11q, with good diastereoselectivity in the last case.
Molecules 2023, 28, x FOR PEER REVIEW 12 of 50 precursor involved in this decarboxylative process. In these conditions, a smooth photoredox-catalyzed decarboxylation triggered an addition sequence eventually leading to the formation of hydroxylamines 11. Various α-amino hydroxylamines having an alkyl or aryl pendant (11i-m) could be synthesized as well as products 11n-o originated from the ketone nitrones. On the other side, for instance, cyclic nitrones could be engaged in this transformation giving pyrrolidine hydroxylamines 11p and 11q, with good diastereoselectivity in the last case.
It was proposed that the mechanism of this transformation stemmed from the formation of carboxylate A after deprotonation of the α-amino acid 19 (Scheme 16) [35]. An oxidative SET of this anion A by the excited iridium(III) photocatalyst Cat8 allowed the formation of the radical B undergoing a decarboxylative event towards α-amino radical C thereafter. Then, an addition reaction took place to nitrone 2 to afford product D, which underwent a reduction to the final product 11 by Ir(II) complex and thereby securing a redox-neutral process.

Scheme 16.
Proposed mechanism for the photoredox-catalyzed reaction of α-amino acids with nitrones.

Azomethine Imines
The radical-based transformation of azomethine imines has only recently appeared in the literature by using essentially cyclic Dorn-and Otto-derived dipoles ( Figure 4) [36]. This emerging synthetic approach complements the well-developed dipolar It was proposed that the mechanism of this transformation stemmed from the formation of carboxylate A after deprotonation of the α-amino acid 19 (Scheme 16) [35]. An oxidative SET of this anion A by the excited iridium(III) photocatalyst Cat8 allowed the formation of the radical B undergoing a decarboxylative event towards α-amino radical C thereafter. Then, an addition reaction took place to nitrone 2 to afford product D, which underwent a reduction to the final product 11 by Ir(II) complex and thereby securing a redox-neutral process.
Molecules 2023, 28, x FOR PEER REVIEW 12 of 50 precursor involved in this decarboxylative process. In these conditions, a smooth photoredox-catalyzed decarboxylation triggered an addition sequence eventually leading to the formation of hydroxylamines 11. Various α-amino hydroxylamines having an alkyl or aryl pendant (11i-m) could be synthesized as well as products 11n-o originated from the ketone nitrones. On the other side, for instance, cyclic nitrones could be engaged in this transformation giving pyrrolidine hydroxylamines 11p and 11q, with good diastereoselectivity in the last case.
It was proposed that the mechanism of this transformation stemmed from the formation of carboxylate A after deprotonation of the α-amino acid 19 (Scheme 16) [35]. An oxidative SET of this anion A by the excited iridium(III) photocatalyst Cat8 allowed the formation of the radical B undergoing a decarboxylative event towards α-amino radical C thereafter. Then, an addition reaction took place to nitrone 2 to afford product D, which underwent a reduction to the final product 11 by Ir(II) complex and thereby securing a redox-neutral process.

Scheme 16.
Proposed mechanism for the photoredox-catalyzed reaction of α-amino acids with nitrones.

Azomethine Imines
The radical-based transformation of azomethine imines has only recently appeared in the literature by using essentially cyclic Dorn-and Otto-derived dipoles ( Figure 4) [36]. This emerging synthetic approach complements the well-developed dipolar Scheme 16. Proposed mechanism for the photoredox-catalyzed reaction of α-amino acids with nitrones.

Azomethine Imines
The radical-based transformation of azomethine imines has only recently appeared in the literature by using essentially cyclic Dorn-and Otto-derived dipoles ( Figure 4) [36]. This emerging synthetic approach complements the well-developed dipolar cycloadditions and nucleophilic additions of organometallic anionic reagents to these types of dipoles [37][38][39][40].
Molecules 2023, 28, x FOR PEER REVIEW 13 of 50 cycloadditions and nucleophilic additions of organometallic anionic reagents to these types of dipoles [37][38][39][40]. A mechanistic investigation revealed that upon irradiation, the excited iridium(III) photocatalyst Cat9 reduced the azomethine imine 21a (Ered = −1.76 V vs. Ag/AgCl in DMSO) by a SET to form the corresponding radical intermediate A (Scheme 18). The radical A was subsequently engaged into a radical-radical coupling process with a difluoromethylene radical counterpart B, originated from the reduction in BrCF2CO2Et 20a by an excess of ascorbate (Asc − ), to provide product 22a. The ascorbic acid (Eox = +0.32 V vs. Ag/AgCl in DMSO) also regenerated the photocatalyst Cat9 by reducing the Ir(IV) species (Eox = +0.68 V vs. Ag/AgCl in DMSO) into Ir(III). The ascorbyl radical thus obtained disproportionated into both the dehydroascorbic acid (DAsc) and ascorbate (Asc − ) in the presence of a base, the last species (Asc − ) being useful for the reduction of 21a into B. In 2019 (Scheme 17), the group of Yang, Chen, Xiang and collaborators demonstrated the formal addition of difluoroalkyl derivatives R 1 CF 2 Br 20 (R = CO 2 R, C(O)NR 2 , heterocycles) to azomethine imines 21 upon visible light photoredox catalysis. By means of a powerful reductant, namely the photocatalyst Ir(ppy) 3 Cat9 (*Ir(ppy) 3 , E red = −1.82 V vs. Ag/AgCl in DMSO), in the presence of an excess of ascorbic acid (Asc-H) and Cs 2 CO 3 as a base [41],various difluoroalkyl motifs (22a-d) flanked by ester, amide or heterocyclic moieties could be introduced. cycloadditions and nucleophilic additions of organometallic anionic reagents to these types of dipoles [37][38][39][40]. A mechanistic investigation revealed that upon irradiation, the excited iridium(III) photocatalyst Cat9 reduced the azomethine imine 21a (Ered = −1.76 V vs. Ag/AgCl in DMSO) by a SET to form the corresponding radical intermediate A (Scheme 18). The radical A was subsequently engaged into a radical-radical coupling process with a difluoromethylene radical counterpart B, originated from the reduction in BrCF2CO2Et 20a by an excess of ascorbate (Asc − ), to provide product 22a. The ascorbic acid (Eox = +0.32 V vs. Ag/AgCl in DMSO) also regenerated the photocatalyst Cat9 by reducing the Ir(IV) species (Eox = +0.68 V vs. Ag/AgCl in DMSO) into Ir(III). The ascorbyl radical thus obtained disproportionated into both the dehydroascorbic acid (DAsc) and ascorbate (Asc − ) in the presence of a base, the last species (Asc − ) being useful for the reduction of 21a into B. Scheme 17. Photoredox-catalyzed reaction of gem-difluoroalkyl bromide derivatives with azomethine imines.
A mechanistic investigation revealed that upon irradiation, the excited iridium(III) photocatalyst Cat9 reduced the azomethine imine 21a (E red = −1.76 V vs. Ag/AgCl in DMSO) by a SET to form the corresponding radical intermediate A (Scheme 18). The radical A was subsequently engaged into a radical-radical coupling process with a difluoromethylene radical counterpart B, originated from the reduction in BrCF 2 CO 2 Et 20a by an excess of ascorbate (Asc − ), to provide product 22a. The ascorbic acid (E ox = +0.32 V vs. Ag/AgCl in DMSO) also regenerated the photocatalyst Cat9 by reducing the Ir(IV) species (E ox = +0.68 V vs. Ag/AgCl in DMSO) into Ir(III). The ascorbyl radical thus obtained disproportionated into both the dehydroascorbic acid (DAsc) and ascorbate (Asc − ) in the presence of a base, the last species (Asc − ) being useful for the reduction of 21a into B.
Shortly afterwards, the group of Paixão developed an efficient photocatalytic sequence allowing the α-amino alkylation of azomethine imines 21 into products 23 starting from a large array of N,N-dimethylaniline derivatives 10, which required the use of a base such as K 2 CO 3 and degassed conditions (Scheme 19) [32]. The corresponding pyrazolidinones 23 were obtained thanks to blue LED irradiation conditions either with ruthenium or iridium photocatalysts Cat5 and Cat8, respectively. This strategy was advantageously applied to the late-stage modification of pharmaceutical ingredients. Next, stereoselective processes were also addressed, but moderate diastereoselectivities were observed. Shortly afterwards, the group of Paixão developed an efficient photocatalytic sequence allowing the α-amino alkylation of azomethine imines 21 into products 23 starting from a large array of N,N-dimethylaniline derivatives 10, which required the use of a base such as K2CO3 and degassed conditions (Scheme 19) [32]. The corresponding pyrazolidinones 23 were obtained thanks to blue LED irradiation conditions either with ruthenium or iridium photocatalysts Cat5 and Cat8, respectively. This strategy was advantageously applied to the late-stage modification of pharmaceutical ingredients. Next, stereoselective processes were also addressed, but moderate diastereoselectivities were observed. The mechanistic investigation allowed the authors to propose a photocatalytic cycle by which the excited photocatalysts (*PC) Cat5 (E1/2(Ru(II)*/Ru(I)) = +0.77 V vs. SCE in MeCN) or Cat8 (E1/2(Ir(III)*/Ir(II)) = +1.21 V vs. SCE in MeCN) first oxidized the dimethylaniline 10a (Eox = 0.80 V vs. SCE in MeCN) leading to the radical A after deprotonation of the radical cation intermediate (Scheme 20) [32]. Then, an addition of the radical A took place to azomethine imine 21a providing the radical cation B, or the amidyl intermediate C derived thereof, which underwent a reduction by the SET triggered by PC − furnishing the desired product 23a while regenerating the photocatalyst through an overall redox neutral sequence. The direct reduction of the azomethine imine 21a (Ered= -1.66 V vs. SCE Scheme 18. Proposed mechanism for the photoredox-catalyzed reaction of gem-difluoroalkyl bromide derivatives with azomethine imines.
Shortly afterwards, the group of Paixão developed an efficient photocatalytic sequence allowing the α-amino alkylation of azomethine imines 21 into products 23 starting from a large array of N,N-dimethylaniline derivatives 10, which required the use of a base such as K2CO3 and degassed conditions (Scheme 19) [32]. The corresponding pyrazolidinones 23 were obtained thanks to blue LED irradiation conditions either with ruthenium or iridium photocatalysts Cat5 and Cat8, respectively. This strategy was advantageously applied to the late-stage modification of pharmaceutical ingredients. Next, stereoselective processes were also addressed, but moderate diastereoselectivities were observed.
The mechanistic investigation allowed the authors to propose a photocatalytic cycle by which the excited photocatalysts (*PC) Cat5 (E1/2(Ru(II)*/Ru(I)) = +0.77 V vs. SCE in MeCN) or Cat8 (E1/2(Ir(III)*/Ir(II)) = +1.21 V vs. SCE in MeCN) first oxidized the dimethylaniline 10a (Eox = 0.80 V vs. SCE in MeCN) leading to the radical A after deprotonation of the radical cation intermediate (Scheme 20) [32]. Then, an addition of the radical A took place to azomethine imine 21a providing the radical cation B, or the amidyl intermediate C derived thereof, which underwent a reduction by the SET triggered by PC − furnishing the desired product 23a while regenerating the photocatalyst through an overall redox neutral sequence. The direct reduction of the azomethine imine 21a (Ered= -1.66 V vs. SCE Scheme 19. Photoredox-catalyzed reaction of N-aryl α-aminoalkyl derivatives with azomethine imines. The mechanistic investigation allowed the authors to propose a photocatalytic cycle by which the excited photocatalysts (*PC) Cat5 (E 1/2 (Ru(II)*/Ru(I)) = +0.77 V vs. SCE in MeCN) or Cat8 (E 1/2 (Ir(III)*/Ir(II)) = +1.21 V vs. SCE in MeCN) first oxidized the dimethylaniline 10a (E ox = 0.80 V vs. SCE in MeCN) leading to the radical A after deprotonation of the radical cation intermediate (Scheme 20) [32]. Then, an addition of the radical A took place to azomethine imine 21a providing the radical cation B, or the amidyl intermediate C derived thereof, which underwent a reduction by the SET triggered by PC − furnishing the desired product 23a while regenerating the photocatalyst through an overall redox neutral sequence. The direct reduction of the azomethine imine 21a (E red = −1.66 V vs. SCE at 20 • C in MeCN) was ruled out based on the unsuitable reduction potential of Cat5 and Cat8 (E red = −1.33 V vs. SCE and E red = −1.37 V vs. SCE at 20 • C in MeCN). The Paixão's tactic complements the one developed by Yang and colleagues [41], who claimed the first reduction event of the azomethine imine 21a (Scheme 18 vs. Scheme 20).
The Paixão group further developed this strategy by making use of readily available 1,4-dihydropyridines (DHPs) reagents 17 in order to install an amide moiety onto the azomethine imines 21 (Scheme 21) [33]. Thanks to the organic photocatalyst 4CzIPN Cat7 and upon blue LED irradiation, a series of amide-derived pyrazolidinones 24 flanked by an aryl or heteroaryl moiety (R 2 ) were synthesized. Importantly, these conditions were general enough for the synthesis of a large array of amino-acids (e.g., 24d-e), peptides and steroid-like moieties (R 1 NH), which are important pendants in drug-like molecules. The Paixão group further developed this strategy by making use of readily available 1,4-dihydropyridines (DHPs) reagents 17 in order to install an amide moiety onto the azomethine imines 21 (Scheme 21) [33]. Thanks to the organic photocatalyst 4CzIPN Cat7 and upon blue LED irradiation, a series of amide-derived pyrazolidinones 24 flanked by an aryl or heteroaryl moiety (R 2 ) were synthesized. Importantly, these conditions were general enough for the synthesis of a large array of amino-acids (e.g., 24d-e), peptides and steroid-like moieties (R 1 NH), which are important pendants in drug-like molecules. In the spirit of the previous catalytic cycle (Scheme 20 vs. Scheme 22), the authors proposed a reductive quenching of the photocatalyst Cat7 leading to an oxidation of the dihydropyridine 17a (Eox = +1.21 V vs. SCE) in the pyridinium cation intermediate upon SET, which released the protonated pyridinium A and carbamoyl radical B [33]. This sequence was secured by the triplet excited state of photocatalyst 4CzIPN Cat7 Scheme 20. Proposed mechanism for the photoredox-catalyzed reaction of N-aryl α-aminoalkyl derivatives with azomethine imines. at 20 °C in MeCN) was ruled out based on the unsuitable reduction potential of Cat5 and Cat8 (Ered = −1.33 V vs. SCE and Ered = −1.37 V vs. SCE at 20 °C in MeCN). The Paixão's tactic complements the one developed by Yang and colleagues [41], who claimed the first reduction event of the azomethine imine 21a (Schemes 18 vs. Scheme 20). Scheme 20. Proposed mechanism for the photoredox-catalyzed reaction of N-aryl α-aminoalkyl derivatives with azomethine imines.
The Paixão group further developed this strategy by making use of readily available 1,4-dihydropyridines (DHPs) reagents 17 in order to install an amide moiety onto the azomethine imines 21 (Scheme 21) [33]. Thanks to the organic photocatalyst 4CzIPN Cat7 and upon blue LED irradiation, a series of amide-derived pyrazolidinones 24 flanked by an aryl or heteroaryl moiety (R 2 ) were synthesized. Importantly, these conditions were general enough for the synthesis of a large array of amino-acids (e.g., 24d-e), peptides and steroid-like moieties (R 1 NH), which are important pendants in drug-like molecules. In the spirit of the previous catalytic cycle (Scheme 20 vs. Scheme 22), the authors proposed a reductive quenching of the photocatalyst Cat7 leading to an oxidation of the dihydropyridine 17a (Eox = +1.21 V vs. SCE) in the pyridinium cation intermediate upon SET, which released the protonated pyridinium A and carbamoyl radical B [33]. This sequence was secured by the triplet excited state of photocatalyst 4CzIPN Cat7 Scheme 21. Photoredox-catalyzed reaction of 4-carbamoyl dihydropyridine derivatives with azomethine imines.
In the spirit of the previous catalytic cycle (Scheme 20 vs. Scheme 22), the authors proposed a reductive quenching of the photocatalyst Cat7 leading to an oxidation of the dihydropyridine 17a (E ox = +1.21 V vs. SCE) in the pyridinium cation intermediate upon SET, which released the protonated pyridinium A and carbamoyl radical B [33]. This sequence was secured by the triplet excited state of photocatalyst 4CzIPN Cat7 (E 1/2 (PC*/PC − ) = +1.35 V vs. SCE) and the presence of the radical species B was proven by a trapping experiment with TEMPO (Scheme 6). Then, the addition of the carbamoyl radical B to dipole 2a occurred to form the supposed amidyl intermediate C, which underwent a reduction by 4CzIPN •− , followed by a protonation event towards the formation of product 24a.
In these previous pioneering and insightful contributions, upon photoredox catalysis, the use of chiral azomethine imine precursors 21 was mentioned but sparingly exploited in radical processes and led to modest or undescribed diastereoselective ratios. Oudeyer, Brière and coworkers addressed this issue by using an alternative electrochemical approach (Scheme 23) [42] under convenient galvanostatic conditions with glassy carbon electrodes in an undivided cell. In the presence of Hünig base, the redox-active esters (RAEs) N-(acyloxy)phthalimides (NHPs) 26 were added diastereoselectively to dipoles 21 (90:10 to >95:5 dr) to furnish, after purification on silica gel column chromatography, a single diastereoisomer of pyrazolidinones 27. Primary, secondary and tertiary radical intermediates were tolerated (e.g., providing 27a-c), and improved stereoselectivity were obtained with the more sterically hindered precursors. Azomethine imines with an heteroaromatic (27h) or aliphatic (27g) were compatible with these conditions. Importantly, the use of an enantioenriched azomethine imine (98% ee) showed no erosion of the enantioselectivity during this radical process. In these previous pioneering and insightful contributions, upon photoredox catalysis, the use of chiral azomethine imine precursors 21 was mentioned but sparingly exploited in radical processes and led to modest or undescribed diastereoselective ratios. Oudeyer, Brière and coworkers addressed this issue by using an alternative electrochemical approach (Scheme 23) [42] under convenient galvanostatic conditions with glassy carbon electrodes in an undivided cell. In the presence of Hünig base, the redox-active esters (RAEs) N-(acyloxy)phthalimides (NHPs) 26 were added diastereoselectively to dipoles 21 (90:10 to >95:5 dr) to furnish, after purification on silica gel column chromatography, a single diastereoisomer of pyrazolidinones 27. Primary, secondary and tertiary radical intermediates were tolerated (e.g., providing 27a-c), and improved stereoselectivity were obtained with the more sterically hindered precursors. Azomethine imines with an heteroaromatic (27h) or aliphatic (27g) were compatible with these conditions. Importantly, the use of an enantioenriched azomethine imine (98% ee) showed no erosion of the enantioselectivity during this radical process.
In these previous pioneering and insightful contributions, upon photoredox catalysis, the use of chiral azomethine imine precursors 21 was mentioned but sparingly exploited in radical processes and led to modest or undescribed diastereoselective ratios. Oudeyer, Brière and coworkers addressed this issue by using an alternative electrochemical approach (Scheme 23) [42] under convenient galvanostatic conditions with glassy carbon electrodes in an undivided cell. In the presence of Hünig base, the redox-active esters (RAEs) N-(acyloxy)phthalimides (NHPs) 26 were added diastereoselectively to dipoles 21 (90:10 to >95:5 dr) to furnish, after purification on silica gel column chromatography, a single diastereoisomer of pyrazolidinones 27. Primary, secondary and tertiary radical intermediates were tolerated (e.g., providing 27a-c), and improved stereoselectivity were obtained with the more sterically hindered precursors. Azomethine imines with an heteroaromatic (27h) or aliphatic (27g) were compatible with these conditions. Importantly, the use of an enantioenriched azomethine imine (98% ee) showed no erosion of the enantioselectivity during this radical process. At that stage, it was believed that a first cathodic reductive SET generated the radical intermediate A from the cyclobutene derived RAE 26d to afford, after the fragmentationdecarboxylation events, radical B (Scheme 24). An addition of B to the less hindered face of the (Z)-azomethine imine 21b provided the cation radical C, which was sequentially reduced at the cathode leading to product 27d after protonation. The cyclic voltammetry investigation demonstrated the ability of the RAE 26d (E = −1.27 V vs. SCE in N,Ndimethylformamide-DMF) to be reduced before the azomethine imine 21b (E = −1.66 V vs. SCE in DMF), while the Hünig base (E = +0.88 V vs. SCE in DMF) served as a sacrificial reducing agent during the counter reaction and a source of proton. It has been proposed that this amine was oxidized first in galvanostatic conditions and allowed, thereby, a protection of the formed product 27d, which highlighted two oxidation waves at +1.12 V and +1.56 V, respectively. decarboxylation events, radical B (Scheme 24). An addition of B to the less hindered face of the (Z)-azomethine imine 21b provided the cation radical C, which was sequentially reduced at the cathode leading to product 27d after protonation. The cyclic voltammetry investigation demonstrated the ability of the RAE 26d (E = −1.27 V vs. SCE in N,N-dimethylformamide-DMF) to be reduced before the azomethine imine 21b (E = −1.66 V vs. SCE in DMF), while the Hünig base (E = +0.88 V vs. SCE in DMF) served as a sacrificial reducing agent during the counter reaction and a source of proton. It has been proposed that this amine was oxidized first in galvanostatic conditions and allowed, thereby, a protection of the formed product 27d, which highlighted two oxidation waves at +1.12 V and +1.56 V, respectively. Scheme 24. Proposed mechanism for the photoredox-catalyzed reaction NHPI redox-active esters with azomethine imines.

Various Dipoles
Among imine derivatives, hydrazones are known to be versatile platform molecules for the addition of radical species and serve as model substrates to investigate these processes [12][13][14]. Although the activation of hydrazones by Lewis acids, such as BF3.Et2O, is known to favor the radical addition reaction, Dilman and coworkers reported in 2021 an insightful investigation on boron chelate intermediates [43] (Scheme 25). Indeed, in the presence of boron trifluoride diethyl etherate, the N-acylhydrazones 28 were transformed into the corresponding difluoroboryl complex 29, which can be isolated or used in situ for the subsequent radical addition reaction. Formally, this type of structure 29 is reminiscent of the aforementioned dipole species and hereby discussed for comparison purposes. The presence of the well-suited acridine photocatalyst Cat10, upon irradiation (400 nm, 60W LED), triggered a decarboxylative event of carboxylic acid 30 allowing a radical addition to dipole-like 29 leading to the addition products 31 in good yields. For instance, N-benzoyl hydrazones (R 2 = Ph) underwent an addition reaction of primary, secondary and tertiary radicals to give products 31a-31e, and N-pivalic hydrazones (R 2 = t-Bu) were also reactive in these conditions to provide products 31f-j. In this case, a protocol with an in situ formation of the dipole-like species 29 was successfully used. Importantly, several hydrazones 28 (precursors of 29) were evaluated but did not show any expected product formation.

Various Dipoles
Among imine derivatives, hydrazones are known to be versatile platform molecules for the addition of radical species and serve as model substrates to investigate these processes [12][13][14]. Although the activation of hydrazones by Lewis acids, such as BF 3 .Et 2 O, is known to favor the radical addition reaction, Dilman and coworkers reported in 2021 an insightful investigation on boron chelate intermediates [43] (Scheme 25). Indeed, in the presence of boron trifluoride diethyl etherate, the N-acylhydrazones 28 were transformed into the corresponding difluoroboryl complex 29, which can be isolated or used in situ for the subsequent radical addition reaction. Formally, this type of structure 29 is reminiscent of the aforementioned dipole species and hereby discussed for comparison purposes. The presence of the well-suited acridine photocatalyst Cat10, upon irradiation (400 nm, 60 W LED), triggered a decarboxylative event of carboxylic acid 30 allowing a radical addition to dipole-like 29 leading to the addition products 31 in good yields. For instance, N-benzoyl hydrazones (R 2 = Ph) underwent an addition reaction of primary, secondary and tertiary radicals to give products 31a-31e, and N-pivalic hydrazones (R 2 = t-Bu) were also reactive in these conditions to provide products 31f-j. In this case, a protocol with an in situ formation of the dipole-like species 29 was successfully used. Importantly, several hydrazones 28 (precursors of 29) were evaluated but did not show any expected product formation. Regarding the mechanism (Scheme 26), it was proposed that a hydrogen bonding occurred between the carboxylic acid partner 30 and acridine-derived photocatalyst Cat10 [43]. Upon irradiation a light-induced proton-coupled electron transfer (PCET) took place to furnish radicals B and, subsequently, C after decarboxylation. Then, an addition to iminium 29 occurred, giving rise to the supposed stabilized radical five-membered ring species D. Eventually, either a hydrogen atom transfer (HAT), or a SET followed by a protonation sequence, occurred and led to chelate product E, as a precursor of the expected final product after workup. The 2,4,6-collidine base was supposed to drive the protonation equilibrium toward F, preventing thereby a parasitic proton transfer event from intermediate E. Regarding the mechanism (Scheme 26), it was proposed that a hydrogen bonding occurred between the carboxylic acid partner 30 and acridine-derived photocatalyst Cat10 [43]. Upon irradiation a light-induced proton-coupled electron transfer (PCET) took place to furnish radicals B and, subsequently, C after decarboxylation. Then, an addition to iminium 29 occurred, giving rise to the supposed stabilized radical five-membered ring species D.
Eventually, either a hydrogen atom transfer (HAT), or a SET followed by a protonation sequence, occurred and led to chelate product E, as a precursor of the expected final product after workup. The 2,4,6-collidine base was supposed to drive the protonation equilibrium toward F, preventing thereby a parasitic proton transfer event from intermediate E.
Regarding the mechanism (Scheme 26), it was proposed that a hydrogen bonding occurred between the carboxylic acid partner 30 and acridine-derived photocatalyst Cat10 [43]. Upon irradiation a light-induced proton-coupled electron transfer (PCET) took place to furnish radicals B and, subsequently, C after decarboxylation. Then, an addition to iminium 29 occurred, giving rise to the supposed stabilized radical five-membered ring species D. Eventually, either a hydrogen atom transfer (HAT), or a SET followed by a protonation sequence, occurred and led to chelate product E, as a precursor of the expected final product after workup. The 2,4,6-collidine base was supposed to drive the protonation equilibrium toward F, preventing thereby a parasitic proton transfer event from intermediate E.

Scheme 26.
Proposed mechanism for the photoredox-catalyzed reaction of carboxylic acid derivatives to N-acylhydrazones.
Interestingly, the authors performed DFT calculations on various imine derivatives with the addition of iso-propyl radical as a model reaction (Scheme 27). The addition of the iso-propyl radical was more facile with the difluoroboryl complex 29a in comparison to the hydrazone 28a. Interestingly, in spite of the addition reaction of dipoles such as nitrone 2c or azomethine imine 21a being much more exergonic, the radical process was faster (transition state lower in energy) with iminium 29a, especially with regard to nitrone 2c. The authors assumed this phenomenon to be due to the radical stabilization within the boron-chelate structure.

Scheme 26.
Proposed mechanism for the photoredox-catalyzed reaction of carboxylic acid derivatives to N-acylhydrazones.
Interestingly, the authors performed DFT calculations on various imine derivatives with the addition of iso-propyl radical as a model reaction (Scheme 27). The addition of the iso-propyl radical was more facile with the difluoroboryl complex 29a in comparison to the hydrazone 28a. Interestingly, in spite of the addition reaction of dipoles such as nitrone 2c or azomethine imine 21a being much more exergonic, the radical process was faster (transition state lower in energy) with iminium 29a, especially with regard to nitrone 2c. The authors assumed this phenomenon to be due to the radical stabilization within the boron-chelate structure.

Pyridinium-N-Oxide
While nucleophilic addition to arene N-oxides has been known since the beginning of the 20th century, Minisci-type radical addition only emerged a decade ago [22,23]. Since then, and thanks to the development of visible-light redox processes, N-oxides have become a great platform for C-H functionalization of heterocycles, as further exposed (Figure 5). It is worth mentioning that, in contrast to the classical Minisci reaction from heterocycles, starting with pyridine N-oxides provides an almost exclusive regioselectivity towards the formation of the C2-substituted product, explaining the wide interest that these moieties have raised. This regioselectivity was postulated to arise from electrostatic interactions between the pyridinium N-oxide and the radical precursor [44].

Pyridinium-N-Oxide
While nucleophilic addition to arene N-oxides has been known since the beginning of the 20th century, Minisci-type radical addition only emerged a decade ago [22,23]. Since then, and thanks to the development of visible-light redox processes, N-oxides have become a great platform for C-H functionalization of heterocycles, as further exposed ( Figure 5). It is worth mentioning that, in contrast to the classical Minisci reaction from heterocycles, starting with pyridine N-oxides provides an almost exclusive regioselectivity towards the formation of the C2-substituted product, explaining the wide interest that these moieties have raised. This regioselectivity was postulated to arise from electrostatic interactions between the pyridinium N-oxide and the radical precursor [44].

Pyridinium-N-Oxide
While nucleophilic addition to arene N-oxides has been known since the beginning of the 20th century, Minisci-type radical addition only emerged a decade ago [22,23]. Since then, and thanks to the development of visible-light redox processes, N-oxides have become a great platform for C-H functionalization of heterocycles, as further exposed (Figure 5). It is worth mentioning that, in contrast to the classical Minisci reaction from heterocycles, starting with pyridine N-oxides provides an almost exclusive regioselectivity towards the formation of the C2-substituted product, explaining the wide interest that these moieties have raised. This regioselectivity was postulated to arise from electrostatic interactions between the pyridinium N-oxide and the radical precursor [44]. In 2016, Han, Pan and coworkers reported the deoxygenative C2-sulfonylation reaction of quinoline N-oxides 32 in the presence of sodium sulfinate 33 and potassium persulfate as the radical initiator and catalyzed by copper(II) bromide (Scheme 28) [45]. Variation in the substituents on the sulfinate and quinoline moieties were carried out with aryl (34a-e), alkyl (34f) and heteroaryl (34g) groups tolerated for the first one and methyl and halogens groups (34h-j) for the latter ones. Remarkably, exclusive formation of C2functionnalized products was observed, regardless of the substitution pattern on the azacycles 32. In 2016, Han, Pan and coworkers reported the deoxygenative C2-sulfonylation reaction of quinoline N-oxides 32 in the presence of sodium sulfinate 33 and potassium persulfate as the radical initiator and catalyzed by copper(II) bromide (Scheme 28) [45]. Variation in the substituents on the sulfinate and quinoline moieties were carried out with aryl (34a-e), alkyl (34f) and heteroaryl (34g) groups tolerated for the first one and methyl and halogens groups (34h-j) for the latter ones. Remarkably, exclusive formation of C2-functionnalized products was observed, regardless of the substitution pattern on the azacycles 32. The reaction was believed to start with the oxidation of the sulfinate radical 33a by Cu(II) or K2S2O8 (Scheme 29). Intermediate A reacted with the quinoline N-oxide through a Minisci-like pathway to deliver intermediate B, which was further reduced in the presence of water to deliver hydroxylamine intermediate C. The desired product 34a was obtained by elimination of water from intermediate C. Scheme 29. Proposed mechanism for the Cu(II)-catalyzed reaction of sodium sulfinate with quinoline N-oxides.
The group of Guo developed the catalytic cyanoalkylation of heteroaromatic N-oxides 32 (quinoline), 35 (pyridine) and 36 (quinoxaline) via C-C bond cleavage of cyclobutanone oximes 35 (Scheme 30) [46]. NiCl2.glyme surrounded by bipyridine ligands proved to be the best catalyst for this reaction, which still required a heating of 100 °C. Nevertheless, a broad scope was obtained, as quinolines (38a-h), isoquinolines, pyridines (39a,b), quinazoline, quinoxaline (40a) and benzoquinoline N-oxides were successfully applied to this methodology. It is worth mentioning that substitution was tolerated at any position on the quinoline. Moreover, cyclobutanone oximes bearing aryl, benzyl or alkyl groups on the C3 position (38f,g), as well as 3,3-disubstituted and tricyclic oximes (38h) were efficiently converted to the corresponding products. The reaction was believed to start with the oxidation of the sulfinate radical 33a by Cu(II) or K2S2O8 (Scheme 29). Intermediate A reacted with the quinoline N-oxide through a Minisci-like pathway to deliver intermediate B, which was further reduced in the presence of water to deliver hydroxylamine intermediate C. The desired product 34a was obtained by elimination of water from intermediate C. The group of Guo developed the catalytic cyanoalkylation of heteroaromatic N-oxides 32 (quinoline), 35 (pyridine) and 36 (quinoxaline) via C-C bond cleavage of cyclobutanone oximes 35 (Scheme 30) [46]. NiCl2.glyme surrounded by bipyridine ligands proved to be the best catalyst for this reaction, which still required a heating of 100 °C. Nevertheless, a broad scope was obtained, as quinolines (38a-h), isoquinolines, pyridines (39a,b), quinazoline, quinoxaline (40a) and benzoquinoline N-oxides were successfully applied to this methodology. It is worth mentioning that substitution was tolerated at any position on the quinoline. Moreover, cyclobutanone oximes bearing aryl, benzyl or alkyl groups on the C3 position (38f,g), as well as 3,3-disubstituted and tricyclic oximes (38h) were ef-Scheme 29. Proposed mechanism for the Cu(II)-catalyzed reaction of sodium sulfinate with quinoline N-oxides.
The group of Guo developed the catalytic cyanoalkylation of heteroaromatic N-oxides 32 (quinoline), 35 (pyridine) and 36 (quinoxaline) via C-C bond cleavage of cyclobutanone oximes 35 (Scheme 30) [46]. NiCl 2 .glyme surrounded by bipyridine ligands proved to be the best catalyst for this reaction, which still required a heating of 100 • C. Nevertheless, a broad scope was obtained, as quinolines (38a-h), isoquinolines, pyridines (39a,b), quinazoline, quinoxaline (40a) and benzoquinoline N-oxides were successfully applied to this methodology. It is worth mentioning that substitution was tolerated at any position on the quinoline. Moreover, cyclobutanone oximes bearing aryl, benzyl or alkyl groups on the C3 position (38f,g), as well as 3,3-disubstituted and tricyclic oximes (38h) were efficiently converted to the corresponding products. The mechanism proposed by the authors started with a SET from nickel to cyclobutanone oxime 37a (Scheme 31). The formed radical intermediate A underwent a C-C bond cleavage via β-carbon elimination to generate B, which added to the quinoline N-oxide 32b. The radical cation C was then oxidized by nickel and rearomatized by loss of a proton to release product 38a and regenerated the catalyst. The presence of radical intermediate B was confirmed by trapping experiments with TEMPO and the entire mechanism was supported by radical clock trials, as well as intermolecular competitive and parallel experiments. Shortly afterwards, Xu and coworkers elaborated a new method to introduce alkyl groups at the C2 position of pyridine 35 and pyrazines 41 N-oxides using potassium alkyl trifluoroborates 42 and visible light photoredox catalysis to generate the alkyl radical of interest (Scheme 32) [47]. This methodology was applied to pyridine (39c) and pyrazine N-oxides (43a). The former heterocycle was functionalized at any position, by electrondonating or -withdrawing groups without affecting the regioselectivity of the reaction (39d-k). Concerning the scope of the potassium alkyl trifluoroborates, primary and secondary alkyl chains, containing functional groups such as esters, alkynes, benzyls or halogens, were successfully introduced (39i-j). The mechanism proposed by the authors started with a SET from nickel to cyclobutanone oxime 37a (Scheme 31). The formed radical intermediate A underwent a C-C bond cleavage via β-carbon elimination to generate B, which added to the quinoline N-oxide 32b.
The radical cation C was then oxidized by nickel and rearomatized by loss of a proton to release product 38a and regenerated the catalyst. The presence of radical intermediate B was confirmed by trapping experiments with TEMPO and the entire mechanism was supported by radical clock trials, as well as intermolecular competitive and parallel experiments. The mechanism proposed by the authors started with a SET from nickel to cyclobutanone oxime 37a (Scheme 31). The formed radical intermediate A underwent a C-C bond cleavage via β-carbon elimination to generate B, which added to the quinoline N-oxide 32b. The radical cation C was then oxidized by nickel and rearomatized by loss of a proton to release product 38a and regenerated the catalyst. The presence of radical intermediate B was confirmed by trapping experiments with TEMPO and the entire mechanism was supported by radical clock trials, as well as intermolecular competitive and parallel experiments. Shortly afterwards, Xu and coworkers elaborated a new method to introduce alkyl groups at the C2 position of pyridine 35 and pyrazines 41 N-oxides using potassium alkyl trifluoroborates 42 and visible light photoredox catalysis to generate the alkyl radical of interest (Scheme 32) [47]. This methodology was applied to pyridine (39c) and pyrazine N-oxides (43a). The former heterocycle was functionalized at any position, by electrondonating or -withdrawing groups without affecting the regioselectivity of the reaction (39d-k). Concerning the scope of the potassium alkyl trifluoroborates, primary and secondary alkyl chains, containing functional groups such as esters, alkynes, benzyls or halogens, were successfully introduced (39i-j). Shortly afterwards, Xu and coworkers elaborated a new method to introduce alkyl groups at the C2 position of pyridine 35 and pyrazines 41 N-oxides using potassium alkyl trifluoroborates 42 and visible light photoredox catalysis to generate the alkyl radical of interest (Scheme 32) [47]. This methodology was applied to pyridine (39c) and pyrazine N-oxides (43a). The former heterocycle was functionalized at any position, by electron-donating or -withdrawing groups without affecting the regioselectivity of the reaction (39dk). Concerning the scope of the potassium alkyl trifluoroborates, primary and secondary alkyl chains, containing functional groups such as esters, alkynes, benzyls or halogens, were successfully introduced (39i-j). Based on the experimental results and previous reports, the authors proposed an oxidative quenching cycle, reducing 1-acetoxy-1,2-benziodoxol-3-(1H)-one (BIOAc) into the corresponding alkoxy radical A (Scheme 33). The photocatalyst was regenerated by single-electron transfer from the alkyl trifluoroborate 42a to form the alkyl radical, which further reacted with the pyridine N-oxides 35a. The formation of alkyl radicals was confirmed by trapping experiments with TEMPO and BHT, the corresponding alkyl-TEMPO adduct being isolated. Hydrogen atom transfer from B yielded the desired product 39c and 2-iodobenzoic acid C. Intermolecular (kH/kD = 1.1) and intramolecular (kH/kD = 1.2) kinetic isotope effects (KIE) were found to be almost equal to 1, ruling out the C-H bond cleavage being the rate-determining step. Based on the experimental results and previous reports, the authors proposed an oxidative quenching cycle, reducing 1-acetoxy-1,2-benziodoxol-3-(1H)-one (BIOAc) into the corresponding alkoxy radical A (Scheme 33). The photocatalyst was regenerated by singleelectron transfer from the alkyl trifluoroborate 42a to form the alkyl radical, which further reacted with the pyridine N-oxides 35a. The formation of alkyl radicals was confirmed by trapping experiments with TEMPO and BHT, the corresponding alkyl-TEMPO adduct being isolated. Hydrogen atom transfer from B yielded the desired product 39c and 2iodobenzoic acid C. Intermolecular (k H /k D = 1.1) and intramolecular (k H /k D = 1.2) kinetic isotope effects (KIE) were found to be almost equal to 1, ruling out the C-H bond cleavage being the rate-determining step. Based on the experimental results and previous reports, the authors proposed an oxidative quenching cycle, reducing 1-acetoxy-1,2-benziodoxol-3-(1H)-one (BIOAc) into the corresponding alkoxy radical A (Scheme 33). The photocatalyst was regenerated by single-electron transfer from the alkyl trifluoroborate 42a to form the alkyl radical, which further reacted with the pyridine N-oxides 35a. The formation of alkyl radicals was confirmed by trapping experiments with TEMPO and BHT, the corresponding alkyl-TEMPO adduct being isolated. Hydrogen atom transfer from B yielded the desired product 39c and 2-iodobenzoic acid C. Intermolecular (kH/kD = 1.1) and intramolecular (kH/kD = 1.2) kinetic isotope effects (KIE) were found to be almost equal to 1, ruling out the C-H bond cleavage being the rate-determining step. Inspired by the article from Han and Pan, An and coworkers developed a similar reaction catalyzed by iron(III) trichloride hexahydrate (Scheme 34) [48]. Their scope was comparable to the previous report, with electron-donating and -withdrawing groups tolerated at the C6 (34k-n), C3 and C4 position of the quinoline N-oxides. Aromatic sulfinates (34b,c,e,o,p) were mostly engaged in this reaction, even though examples of heteroaromatic and one example of alkyl sulfinate (34r) can be found. The mechanism is similar to the one proposed in Scheme 29.
Molecules 2023, 28, x FOR PEER REVIEW 23 of 50 Inspired by the article from Han and Pan, An and coworkers developed a similar reaction catalyzed by iron(III) trichloride hexahydrate (Scheme 34) [48]. Their scope was comparable to the previous report, with electron-donating and -withdrawing groups tolerated at the C6 (34k-n), C3 and C4 position of the quinoline N-oxides. Aromatic sulfinates (34b,c,e,o,p) were mostly engaged in this reaction, even though examples of heteroaromatic and one example of alkyl sulfinate (34r) can be found. The mechanism is similar to the one proposed in Scheme 29.

Scheme 34. Fe(III)-catalyzed reaction of sodium sulfinates with quinoline N-oxides.
In 2018, Murakami, Miura and coworkers extended the existing methods for orthoalkylation of pyridine 35 and quinoline 32 N-oxides to electron-rich alkenes 4 by means of visible light photocatalysis (Scheme 35) [49]. The organic photocatalyst Mes-Acr + BF4 − delivered the best results in acidic media at room temperature. The mild conditions enabled the functionalization of pyridine (44a-d) and quinoline (34s) N-oxides, bearing electrondonating (44a,b) or -withdrawing groups (44c). While the regioselectivity was high when the heterocycle was substituted at the C2 (44d) and C4 (44a-c) position, it was poor when substituted at the C3 position. Importantly, this method was applied to more complex molecules (44e) to prove its potential as a late-stage functionalization protocol. In 2018, Murakami, Miura and coworkers extended the existing methods for orthoalkylation of pyridine 35 and quinoline 32 N-oxides to electron-rich alkenes 4 by means of visible light photocatalysis (Scheme 35) [49]. The organic photocatalyst Mes-Acr + BF 4 − delivered the best results in acidic media at room temperature. The mild conditions enabled the functionalization of pyridine (44a-d) and quinoline (34s) N-oxides, bearing electrondonating (44a,b) or -withdrawing groups (44c). While the regioselectivity was high when the heterocycle was substituted at the C2 (44d) and C4 (44a-c) position, it was poor when substituted at the C3 position. Importantly, this method was applied to more complex molecules (44e) to prove its potential as a late-stage functionalization protocol. Inspired by the article from Han and Pan, An and coworkers developed a similar reaction catalyzed by iron(III) trichloride hexahydrate (Scheme 34) [48]. Their scope was comparable to the previous report, with electron-donating and -withdrawing groups tolerated at the C6 (34k-n), C3 and C4 position of the quinoline N-oxides. Aromatic sulfinates (34b,c,e,o,p) were mostly engaged in this reaction, even though examples of heteroaromatic and one example of alkyl sulfinate (34r) can be found. The mechanism is similar to the one proposed in Scheme 29.

Scheme 34. Fe(III)-catalyzed reaction of sodium sulfinates with quinoline N-oxides.
In 2018, Murakami, Miura and coworkers extended the existing methods for orthoalkylation of pyridine 35 and quinoline 32 N-oxides to electron-rich alkenes 4 by means of visible light photocatalysis (Scheme 35) [49]. The organic photocatalyst Mes-Acr + BF4 − delivered the best results in acidic media at room temperature. The mild conditions enabled the functionalization of pyridine (44a-d) and quinoline (34s) N-oxides, bearing electrondonating (44a,b) or -withdrawing groups (44c). While the regioselectivity was high when the heterocycle was substituted at the C2 (44d) and C4 (44a-c) position, it was poor when substituted at the C3 position. Importantly, this method was applied to more complex molecules (44e) to prove its potential as a late-stage functionalization protocol. The authors assumed that the mechanism proceeded via a reductive quenching cycle, in which the excited photocatalyst, oxidized the alkene 4a to form the radical cation A The authors assumed that the mechanism proceeded via a reductive quenching cycle, in which the excited photocatalyst, oxidized the alkene 4a to form the radical cation A (Scheme 36). Pyridine N-oxide 35b reacted with A at the negatively charged oxygen center to give the cyclized radical intermediate C, which formed the C-centered radical D by loss of a proton. Intermediate D underwent a β-N-O bond scission driven by aromatization and promoted by an acidic media to deliver the O-centered radical intermediate E. The subsequent β-C-C bond scission released the C-centered radical intermediate F by loss of an aldehyde fragment. The catalytic cycle was closed by reduction of F to deliver the final product 44a and regenerate the photocatalyst.

Scheme 36.
Proposed mechanism for the photoredox-catalyzed reaction of quinoline N-oxides with electron-rich alkenes.
In line with the abovementioned report, the group of Stephenson described a mild method to perform ortho-alkylation of heterocycle N-oxides 32, 35, 45, 46 by the reductive generation of alkyl radicals under photoredox conditions (Scheme 37) [50]. The radical intermediates were obtained from acyl chlorides or difluoroacetic anhydride 47. Even though the yields were generally moderate, the scope was wide, with good functional group tolerance, as underlined by the substituents on the heteroarenes (44f-h), and mostly the alkylation of biologically relevant molecules (49a). The reaction can also be performed on pyridine, quinoline (34t) and azaindole (48a). The mechanism of the reaction was not disclosed by the authors.

Scheme 36.
Proposed mechanism for the photoredox-catalyzed reaction of quinoline N-oxides with electron-rich alkenes.
In line with the abovementioned report, the group of Stephenson described a mild method to perform ortho-alkylation of heterocycle N-oxides 32, 35, 45, 46 by the reductive generation of alkyl radicals under photoredox conditions (Scheme 37) [50]. The radical intermediates were obtained from acyl chlorides or difluoroacetic anhydride 47. Even though the yields were generally moderate, the scope was wide, with good functional group tolerance, as underlined by the substituents on the heteroarenes (44f-h), and mostly the alkylation of biologically relevant molecules (49a). The reaction can also be performed on pyridine, quinoline (34t) and azaindole (48a). The mechanism of the reaction was not disclosed by the authors. At the same time, Wang and coworkers reported the C2-amination of quinoline Noxides 32 (Scheme 38) [51]. They took advantage of O-benzoylhydroxylamines 50 as radical precursors, which enabled, in combination with 1,2-dichloroethane (DCE), the delivery of the corresponding quinoline 34 without any other reducing reagents. Substitution on the quinoline did not affect the yield (34u-w). Cyclic (34u-w) and acyclic symmetrical (34x) and asymmetrical (34y) amines were also successfully introduced.
At the same time, Wang and coworkers reported the C2-amination of quinoline Noxides 32 (Scheme 38) [51]. They took advantage of O-benzoylhydroxylamines 50 as radical precursors, which enabled, in combination with 1,2-dichloroethane (DCE), the delivery of the corresponding quinoline 34 without any other reducing reagents. Substitution on the quinoline did not affect the yield (34u-w). Cyclic (34u-w) and acyclic symmetrical (34x) and asymmetrical (34y) amines were also successfully introduced.

Scheme 38. Cu(I)-catalyzed reaction of quinoline N-oxides with O-benzoylhydroxylamines.
The mechanism suggested by the authors began with the reduction of the O-benzoyl hydroxylamine 50a to form the morpholine radical, which added to the quinoline N-oxide 32c to deliver A (Scheme 39). A double reduction was required to obtain A, but this step was not further commented by the authors. Intermediate A reacted then with DCE, and the resulting intermediate B lost the chlorinated aldehyde via a N-O cleavage to deliver intermediate C. The latter was oxidized by the copper catalyst via single electron transfer and was further oxidized by oxygen or quinoline N-oxide 32c to release the desired product 34u.

Scheme 38. Cu(I)-catalyzed reaction of quinoline N-oxides with O-benzoylhydroxylamines.
The mechanism suggested by the authors began with the reduction of the O-benzoyl hydroxylamine 50a to form the morpholine radical, which added to the quinoline N-oxide 32c to deliver A (Scheme 39). A double reduction was required to obtain A, but this step was not further commented by the authors. Intermediate A reacted then with DCE, and the resulting intermediate B lost the chlorinated aldehyde via a N-O cleavage to deliver intermediate C. The latter was oxidized by the copper catalyst via single electron transfer and was further oxidized by oxygen or quinoline N-oxide 32c to release the desired product 34u. Shortly afterwards, the group of Postigo described the photocatalyzed perfluoroalkylation of heteroarenes N-oxides 32, 35, 36, 51 using rose Bengal as the photocatalyst and iodoperfluoroalkyl reagent 6 (Scheme 40) [52]. While a wide diversity of heteroarenes was successfully utilized in this reaction (38i, 39l, 40, 52a), the regioselectivity remained low for pyridine derivatives (39l). Shortly afterwards, the group of Postigo described the photocatalyzed perfluoroalkylation of heteroarenes N-oxides 32, 35, 36, 51 using rose Bengal as the photocatalyst and iodoperfluoroalkyl reagent 6 (Scheme 40) [52]. While a wide diversity of heteroarenes was successfully utilized in this reaction (38i, 39l, 40, 52a), the regioselectivity remained low for pyridine derivatives (39l).

Scheme 39.
Proposed mechanism for the Cu(I)-catalyzed reaction of quinoline N-oxides with Obenzoylhydroxylamines.
The proposed mechanism was initiated by the excitation of the photocatalyst, which reduced the perfluoroiodo reagent 6a (Scheme 41). The perfluorinated radical added to the pyridine N-oxide 35a to deliver the radical cation A. This intermediate reacted with the perfluoroiodo reagent to deliver B and regenerated the perfluoroalkyl radical. After a rearomatization process by loss of a proton, 38d was obtained. To close the photocatalytic cycle, the catalyst was reduced by the carbonate anion. The proposed mechanism was initiated by the excitation of the photocatalyst, which reduced the perfluoroiodo reagent 6a (Scheme 41). The perfluorinated radical added to the pyridine N-oxide 35a to deliver the radical cation A. This intermediate reacted with the perfluoroiodo reagent to deliver B and regenerated the perfluoroalkyl radical. After a rearomatization process by loss of a proton, 38d was obtained. To close the photocatalytic cycle, the catalyst was reduced by the carbonate anion. Later on, the group of Singh reported the ortho-acylation of heteroarene N-oxides 32, 35, 41 with alkynes 53 (Scheme 42) [53]. The combination of silver nitrate and potassium persulfate permitted the formation of an electrophilic N-oxide radical, which reacted with electron-rich alkynes 53. The pyridine N-oxides 35 were substituted by electron-donating and -withdrawing groups (44k,l), such as the aromatic on the alkyne (44m,n). Other functionalized heteroarenes, such as pyrazine (54a) and quinoline (34z) were also successfully obtained under these reaction conditions. Later on, the group of Singh reported the ortho-acylation of heteroarene N-oxides 32, 35, 41 with alkynes 53 (Scheme 42) [53]. The combination of silver nitrate and potassium persulfate permitted the formation of an electrophilic N-oxide radical, which reacted with electron-rich alkynes 53. The pyridine N-oxides 35 were substituted by electrondonating and -withdrawing groups (44k,l), such as the aromatic on the alkyne (44m,n).
Other functionalized heteroarenes, such as pyrazine (54a) and quinoline (34z) were also successfully obtained under these reaction conditions. Scheme 41. Proposed mechanism for the photoredox-catalyzed reaction of azaarene N-oxides with perfluoroalkyl iodides.
Later on, the group of Singh reported the ortho-acylation of heteroarene N-oxides 32, 35, 41 with alkynes 53 (Scheme 42) [53]. The combination of silver nitrate and potassium persulfate permitted the formation of an electrophilic N-oxide radical, which reacted with electron-rich alkynes 53. The pyridine N-oxides 35 were substituted by electron-donating and -withdrawing groups (44k,l), such as the aromatic on the alkyne (44m,n). Other functionalized heteroarenes, such as pyrazine (54a) and quinoline (34z) were also successfully obtained under these reaction conditions. Scheme 42. Ag(I)-catalyzed reaction of azaarene N-oxides with alkynes.
The mechanism described for this reaction is rather complex and required the involvement of several transfers of electrons, performed by species resulting from the reaction between silver nitrate and potassium persulfate (Scheme 43). Substrate 32a was oxidized by a persulfate radical anion to form intermediate A, which reacted then with in situ generated silver acetylide to yield the radical cation B. This intermediate rearranged further into the ketene compound C. Addition of water to C resulted into the more stable carboxylic acid D. Intermediate D further reacted with silver to deliver the carboxylate E, which released CO2 to yield the radical compound F. Intermediate F was then oxidized The mechanism described for this reaction is rather complex and required the involvement of several transfers of electrons, performed by species resulting from the reaction between silver nitrate and potassium persulfate (Scheme 43). Substrate 32a was oxidized by a persulfate radical anion to form intermediate A, which reacted then with in situ generated silver acetylide to yield the radical cation B. This intermediate rearranged further into the ketene compound C. Addition of water to C resulted into the more stable carboxylic acid D. Intermediate D further reacted with silver to deliver the carboxylate E, which released CO 2 to yield the radical compound F. Intermediate F was then oxidized and reacted with water to form H, further oxidized into the desired product 44l. Intermediates B, C and E were confirmed by LC-MS experiment.  In line with the previous work by Murakami and coworkers with alkene, the group of Deng applied the method to alkynes 53, which provided access to α-(2-pyridinyl) benzyl amides/ketones 44 by means of photoredox catalysis (Scheme 44) [54]. Substitution on the pyridine N-oxides 35 did not show a significant impact on the yield (44o-s) and quinoline N-oxides 32 could also be subjected to the reaction conditions (34aa). Alkynes functionalized by arenes or amines were also successful partners in this reaction (44s,t). The mechanism resembles the one from Scheme 36 and thus will not be further described. In line with the previous work by Murakami and coworkers with alkene, the group of Deng applied the method to alkynes 53, which provided access to α-(2-pyridinyl) benzyl amides/ketones 44 by means of photoredox catalysis (Scheme 44) [54]. Substitution on the pyridine N-oxides 35 did not show a significant impact on the yield (44o-s) and quinoline Noxides 32 could also be subjected to the reaction conditions (34aa). Alkynes functionalized by arenes or amines were also successful partners in this reaction (44s,t). The mechanism resembles the one from Scheme 36 and thus will not be further described.

Scheme 43.
Proposed mechanism for the Ag(I)-catalyzed reaction of azaarene N-oxides with alkynes.
In line with the previous work by Murakami and coworkers with alkene, the group of Deng applied the method to alkynes 53, which provided access to α-(2-pyridinyl) benzyl amides/ketones 44 by means of photoredox catalysis (Scheme 44) [54]. Substitution on the pyridine N-oxides 35 did not show a significant impact on the yield (44o-s) and quinoline N-oxides 32 could also be subjected to the reaction conditions (34aa). Alkynes functionalized by arenes or amines were also successful partners in this reaction (44s,t). The mechanism resembles the one from Scheme 36 and thus will not be further described.

Scheme 44. Photoredox-catalyzed alkylation of azaarene N-oxides with alkynes.
Shortly afterwards, the group of Wu extended the scope of the abovementioned reaction and disclosed the possibility to obtain the acylated product instead of the alkylatedcompound when the reaction was performed under aerobic conditions (Scheme 45) [55]. Indeed, the alkylated product 44o-t can also exist under its keto-enol form, and will thus be oxidized by singlet oxygen, produced in situ from energy transfer between the photocatalyst and triplet oxygen. Electron-rich alkynes 53 were effective under the optimal Scheme 44. Photoredox-catalyzed alkylation of azaarene N-oxides with alkynes.
Shortly afterwards, the group of Wu extended the scope of the abovementioned reaction and disclosed the possibility to obtain the acylated product instead of the alkylatedcompound when the reaction was performed under aerobic conditions (Scheme 45) [55]. Indeed, the alkylated product 44o-t can also exist under its keto-enol form, and will thus be oxidized by singlet oxygen, produced in situ from energy transfer between the photocatalyst and triplet oxygen. Electron-rich alkynes 53 were effective under the optimal conditions (44u-y), even though a slight modification of the procedure was necessary for diphenylethyne, as the reagent was oxidized in situ under the aerobic photoredox conditions. The introduction of functional groups on the pyridine N-oxide 35 diminished the yields (44v-y) compared to 44u. It is worth mentioning that terminal alkynes were also subjected to this methodology with moderate success (44z). conditions (44u-y), even though a slight modification of the procedure was necessary for diphenylethyne, as the reagent was oxidized in situ under the aerobic photoredox conditions. The introduction of functional groups on the pyridine N-oxide 35 diminished the yields (44v-y) compared to 44u. It is worth mentioning that terminal alkynes were also subjected to this methodology with moderate success (44z).
By also taking advantage of photoredox catalysis, Gao and coworkers developed a new method to perform C2-trifluoromethylation of quinoline N-oxides 32 (Scheme 46) [56]. The very mild combination of Ir(ppy)3 and Togni's reagent 55 allowed the retention of the N-oxide form at the end of the reaction. Electron-withdrawing groups (38k) on 32 provided better results than electron-donating ones (38l-o). Quinoxaline N-oxide 36 was also a potent substrate under these reaction conditions (40c). By also taking advantage of photoredox catalysis, Gao and coworkers developed a new method to perform C2-trifluoromethylation of quinoline N-oxides 32 (Scheme 46) [56]. The very mild combination of Ir(ppy) 3 and Togni's reagent 55 allowed the retention of the N-oxide form at the end of the reaction. Electron-withdrawing groups (38k) on 32 provided better results than electron-donating ones (38l-o). Quinoxaline N-oxide 36 was also a potent substrate under these reaction conditions (40c).

Scheme 45.
Photoredox-catalyzed acylation of pyridine N-oxides with alkynes. By also taking advantage of photoredox catalysis, Gao and coworkers developed a new method to perform C2-trifluoromethylation of quinoline N-oxides 32 (Scheme 46) [56]. The very mild combination of Ir(ppy)3 and Togni's reagent 55 allowed the retention of the N-oxide form at the end of the reaction. Electron-withdrawing groups (38k) on 32 provided better results than electron-donating ones (38l-o). Quinoxaline N-oxide 36 was also a potent substrate under these reaction conditions (40c).
An oxidative quenching cycle was proposed by the authors, in which the excited photocatalyst reduced Togni's reagent 55a to generate the trifluoromethyl radical (Scheme 47). The quinoline N-oxide 32a reacted with the radical to form the radical cation A. This intermediate was further oxidized by the photocatalyst, closing the catalytic cycle, and delivering the product 38j after rearomatization by loss of a proton. An oxidative quenching cycle was proposed by the authors, in which the excited photocatalyst reduced Togni's reagent 55a to generate the trifluoromethyl radical (Scheme 47). The quinoline N-oxide 32a reacted with the radical to form the radical cation A. This intermediate was further oxidized by the photocatalyst, closing the catalytic cycle, and delivering the product 38j after rearomatization by loss of a proton. In 2020, the groups of Song and Gao reported the C2 selective arylation of pyridine 35 and quinoline N-oxides 32 mediated by visible light catalysis and with diaryliodonium tetrafluoroborate 56 as the radical precursor (Scheme 48) [57]. Substitution on the arene ring of 55 did not affect the reaction (38q-t). In sharp contrast, substitution on the pyridine N-oxide 35 mattered, considering the poor regioselectivity when functional groups were introduced at the meta position (39p). The mechanism is similar to the one described above in Scheme 47, with the generation of the aryl radical by reduction of the iodonium reagent via single electron transfer from the photocatalyst. In 2020, the groups of Song and Gao reported the C2 selective arylation of pyridine 35 and quinoline N-oxides 32 mediated by visible light catalysis and with diaryliodonium tetrafluoroborate 56 as the radical precursor (Scheme 48) [57]. Substitution on the arene ring of 55 did not affect the reaction (38q-t). In sharp contrast, substitution on the pyridine N-oxide 35 mattered, considering the poor regioselectivity when functional groups were introduced at the meta position (39p). The mechanism is similar to the one described above in Scheme 47, with the generation of the aryl radical by reduction of the iodonium reagent via single electron transfer from the photocatalyst. 35 and quinoline N-oxides 32 mediated by visible light catalysis and with diaryliodonium tetrafluoroborate 56 as the radical precursor (Scheme 48) [57]. Substitution on the arene ring of 55 did not affect the reaction (38q-t). In sharp contrast, substitution on the pyridine N-oxide 35 mattered, considering the poor regioselectivity when functional groups were introduced at the meta position (39p). The mechanism is similar to the one described above in Scheme 47, with the generation of the aryl radical by reduction of the iodonium reagent via single electron transfer from the photocatalyst.
Inspired by the abovementioned work and considering the appealing features of Nhydroxyphtalimide (NHPI), the group of Zhou described the synthesis of C2-alkylated heteroarenes N-oxides 32, 35, 36, 57 (Scheme 49) [58]. The reaction proceeded on quinoline (38u-z,aa), quinoxaline (40d), quinazoline (58a) and pyridine (39q) N-oxides. The selectivity for the C2 position was high (38u,39q) and it appeared that the more substituted the alkyl group, the higher the yield (38x-z,aa). The mechanism of this reaction will not be further described as it resembles the catalytic cycle in Scheme 47, with the initiation of the Scheme 48. Photoredox-catalyzed reaction of azaarene N-oxides with diaryliodonium tetrafluoroborates.
Inspired by the abovementioned work and considering the appealing features of N-hydroxyphtalimide (NHPI), the group of Zhou described the synthesis of C2-alkylated heteroarenes N-oxides 32, 35, 36, 57 (Scheme 49) [58]. The reaction proceeded on quinoline (38u-z,aa), quinoxaline (40d), quinazoline (58a) and pyridine (39q) N-oxides. The selectivity for the C2 position was high (38u,39q) and it appeared that the more substituted the alkyl group, the higher the yield (38x-z,aa). The mechanism of this reaction will not be further described as it resembles the catalytic cycle in Scheme 47, with the initiation of the reaction via reduction and decarboxylation of NHPI 26 by the photocatalyst, as supported by Stern-Volmer experiments. In 2022, Wan and coworkers enlarged the field of C2 functionalization of heteroarene N-oxides 35 by developing a method to introduce selectively difluoro-acetate and -amide groups (Scheme 50) [59]. This was achieved under visible light-mediated conditions with fac-Ir(ppy)3 as the photocatalyst. It should be noted that the regioselectivity was moderate, as para-substituted side products were obtained (39r), as well as bis-ortho-functionalized Scheme 49. Photoredox-catalyzed reaction of azaarene N-oxides with NHPI redox-active esters.
In 2022, Wan and coworkers enlarged the field of C2 functionalization of heteroarene N-oxides 35 by developing a method to introduce selectively difluoro-acetate and -amide groups (Scheme 50) [59]. This was achieved under visible light-mediated conditions with fac-Ir(ppy) 3 as the photocatalyst. It should be noted that the regioselectivity was moderate, as para-substituted side products were obtained (39r), as well as bis-ortho-functionalized compounds (39s-u). Interestingly, the reaction was selective for pyridine N-oxide over the non-oxidized pyridine ring (39w). In a similar fashion as the above-mentioned reactions, the mechanism is analogous to the one described in Scheme 47.
In 2022, Wan and coworkers enlarged the field of C2 functionalization of heteroarene N-oxides 35 by developing a method to introduce selectively difluoro-acetate and -amide groups (Scheme 50) [59]. This was achieved under visible light-mediated conditions with fac-Ir(ppy)3 as the photocatalyst. It should be noted that the regioselectivity was moderate, as para-substituted side products were obtained (39r), as well as bis-ortho-functionalized compounds (39s-u). Interestingly, the reaction was selective for pyridine N-oxide over the non-oxidized pyridine ring (39w). In a similar fashion as the above-mentioned reactions, the mechanism is analogous to the one described in Scheme 47. Scheme 50. Photoredox-catalyzed reaction of azaarene N-oxides with bromo difluoro acetate derivatives. Scheme 50. Photoredox-catalyzed reaction of azaarene N-oxides with bromo difluoro acetate derivatives.

N-Aminopyridinium Ylides
In contrast to pyridinium N-oxides and N-aminopyridinium salts, N-aminopyridinium ylides have been much less described in the context of catalytic radical reactions [37,60] ( Figure 6). Indeed, only two reports have been published since 2015 to the best of our knowledge. The regioselectivity follows the same as previously described for pyridine N-oxides, namely favored at sarbon-2.

N-Aminopyridinium Ylides
In contrast to pyridinium N-oxides and N-aminopyridinium salts, N-aminopyridinium ylides have been much less described in the context of catalytic radical reactions [37,60] (Figure 6). Indeed, only two reports have been published since 2015 to the best of our knowledge. The regioselectivity follows the same as previously described for pyridine N-oxides, namely favored at sarbon-2. In 2019, the groups of Yu and Wang developed a new method to functionalize Naminopyridinium ylides 59 at the ortho position, via a radical cross-dehydrogenative coupling (CDC) conducted under air, with benzoyl peroxide (BPO) as the radical initiator (Scheme 51) [61]. Several alkanes (44aa-ae) and alcohols (44af-ag) were successfully inserted with a high regioselectivity for the C2 position for most of the examples, an important asset when compared with Minisci or other CDC reaction conditions. In 2019, the groups of Yu and Wang developed a new method to functionalize Naminopyridinium ylides 59 at the ortho position, via a radical cross-dehydrogenative coupling (CDC) conducted under air, with benzoyl peroxide (BPO) as the radical initiator (Scheme 51) [61]. Several alkanes (44aa-ae) and alcohols (44af-ag) were successfully inserted with a high regioselectivity for the C2 position for most of the examples, an important asset when compared with Minisci or other CDC reaction conditions. In 2019, the groups of Yu and Wang developed a new method to functionalize Naminopyridinium ylides 59 at the ortho position, via a radical cross-dehydrogenative coupling (CDC) conducted under air, with benzoyl peroxide (BPO) as the radical initiator (Scheme 51) [61]. Several alkanes (44aa-ae) and alcohols (44af-ag) were successfully inserted with a high regioselectivity for the C2 position for most of the examples, an important asset when compared with Minisci or other CDC reaction conditions. Scheme 51. BPO-catalyzed alkylation of N-aminopyridinium ylides with alkanes or alcohols.
Based on the experimental results, the mechanism was described to start with the homolytic cleavage of the O-O bond of benzoyl peroxide, generating a carboxyl radical, which further abstracted a hydrogen atom from the alkane or the alcohol (Scheme 52). This new alkyl radical R • was further trapped by N-aminopyridinium ylide 59 to form the radical cation A, which fell apart by cleavage of the N-N bond to deliver the desired product 44aa and a nitrene intermediate B. The hydrogen bonding and subsequent formation of a six-membered ring in A clearly explained why the regioselectivity was high in this reaction. The latter abstracted hydrogen atoms from the alkane or the alcohol to release benzoic amide and regenerated the alkyl radical R • . Based on the experimental results, the mechanism was described to start with the homolytic cleavage of the O-O bond of benzoyl peroxide, generating a carboxyl radical, which further abstracted a hydrogen atom from the alkane or the alcohol (Scheme 52). This new alkyl radical R • was further trapped by N-aminopyridinium ylide 59 to form the radical cation A, which fell apart by cleavage of the N-N bond to deliver the desired product 44aa and a nitrene intermediate B. The hydrogen bonding and subsequent formation of a six-membered ring in A clearly explained why the regioselectivity was high in this reaction. The latter abstracted hydrogen atoms from the alkane or the alcohol to release benzoic amide and regenerated the alkyl radical R • . One year later, Hong and coworkers reported an elegant method to access C2-pyridyl β-amino motifs 44ah-ar (Scheme 53) [62]. They were inspired by precedents on 1,3-dipolar cycloadditions of N-aminopyridinium ylides 59 with alkynes and envisaged a similar reaction with alkenes 4 followed by reductive cleavage of the N-N bond to deliver the desired product 44ah-ar. Photochemistry was the key to overcome the endergonic barrier of these cycloaddition reactions with olefins by in situ generation of a N-radical pyridinium intermediate. With an acridinium derivative Cat11 as the photocatalyst and upon blue LED irradiation, a wide range of mono-or disubstituted terminal alkenes (44ah-ao) as well as difunctionalized internal alkenes (44ap) were tolerated in this reaction, with the formation of only one diastereoisomer with a syn configuration. Substituted pyridines at the C2, C3 and C4 positions were successfully applied to this method (44aq) with excellent regioselectivity when the scaffolds were functionalized at the C2-and C4-postion. Furthermore, late-stage diversification of biorelevant molecules was conducted (44ar).

Scheme 52.
Proposed mechanism for the BPO-catalyzed alkylation of N-aminopyridinium ylides with alkanes or alcohols.
One year later, Hong and coworkers reported an elegant method to access C2-pyridyl β-amino motifs 44ah-ar (Scheme 53) [62]. They were inspired by precedents on 1,3-dipolar cycloadditions of N-aminopyridinium ylides 59 with alkynes and envisaged a similar reaction with alkenes 4 followed by reductive cleavage of the N-N bond to deliver the desired product 44ah-ar. Photochemistry was the key to overcome the endergonic barrier of these cycloaddition reactions with olefins by in situ generation of a N-radical pyridinium intermediate. With an acridinium derivative Cat11 as the photocatalyst and upon blue LED irradiation, a wide range of mono-or disubstituted terminal alkenes (44ah-ao) as well as difunctionalized internal alkenes (44ap) were tolerated in this reaction, with the formation of only one diastereoisomer with a syn configuration. Substituted pyridines at the C2, C3 and C4 positions were successfully applied to this method (44aq) with excellent regioselectivity when the scaffolds were functionalized at the C2-and C4-postion. Furthermore, late-stage diversification of biorelevant molecules was conducted (44ar).
One year later, Hong and coworkers reported an elegant method to access C2-pyridyl β-amino motifs 44ah-ar (Scheme 53) [62]. They were inspired by precedents on 1,3-dipolar cycloadditions of N-aminopyridinium ylides 59 with alkynes and envisaged a similar reaction with alkenes 4 followed by reductive cleavage of the N-N bond to deliver the desired product 44ah-ar. Photochemistry was the key to overcome the endergonic barrier of these cycloaddition reactions with olefins by in situ generation of a N-radical pyridinium intermediate. With an acridinium derivative Cat11 as the photocatalyst and upon blue LED irradiation, a wide range of mono-or disubstituted terminal alkenes (44ah-ao) as well as difunctionalized internal alkenes (44ap) were tolerated in this reaction, with the formation of only one diastereoisomer with a syn configuration. Substituted pyridines at the C2, C3 and C4 positions were successfully applied to this method (44aq) with excellent regioselectivity when the scaffolds were functionalized at the C2-and C4-postion. Furthermore, late-stage diversification of biorelevant molecules was conducted (44ar). Scheme 53. Photoredox-catalyzed reaction of N-aminopyridinium ylides with alkenes.
DFT calculations were conducted to shed light on the reaction mechanism and the diastereo-determining step when diastereoisomers were formed (Scheme 54). After

N-Alkylazaarenium Salts
N-Alkylazaarenium salts (i.e., pyridinium 60, quinolinium 61 or isoquinolinium 62) are important classes of substrates that have been involved in numerous reactions as electrophilic partners [63]. Thus, several nucleophiles, such as organometallic species (stoichiometric addition of Grignard reagents, metal-catalyzed additions of various reagent, etc.) [64] or acidic pro-nucleophiles under organocatalytic conditions (including asymmetric versions) to cite a few [65], were added to azaarenium salts providing access to 3D heterocycles from flat heteroaromatic structures. Although this field of research was intensively explored, some challenges remain: (1) generally speaking, azaarenium salts exhibit different electron-deficient sites (namely C2 or C4 positions for pyridines and quinolines), Scheme 54. Proposed mechanism for the photoredox-catalyzed reaction of N-aminopyridinium ylides with alkenes.

N-Alkylazaarenium Salts
N-Alkylazaarenium salts (i.e., pyridinium 60, quinolinium 61 or isoquinolinium 62) are important classes of substrates that have been involved in numerous reactions as electrophilic partners [63]. Thus, several nucleophiles, such as organometallic species (stoichiometric addition of Grignard reagents, metal-catalyzed additions of various reagent, etc.) [64] or acidic pro-nucleophiles under organocatalytic conditions (including asymmetric versions) to cite a few [65], were added to azaarenium salts providing access to 3D heterocycles from flat heteroaromatic structures. Although this field of research was intensively explored, some challenges remain: (1) generally speaking, azaarenium salts exhibit different electron-deficient sites (namely C2 or C4 positions for pyridines and quinolines), rendering the regioselective addition very challenging; (2) the addition of the nucleophilic species generally results in a transient dearomatized intermediate (namely dihydroazaarene derivatives), thus requiring high energy cost for the dearomatization step, especially if one considers pyridine ring, which requires a complete loss of aromaticity compared to quinolines or isoquinolines for which only a partial dearomatization occurs. Surprisingly, in this context, radical species have been less regarded as nucleophilic partners. Nevertheless, as described below such radical-based strategies met some successes in the synthesis of functionalized pyridines A, pyridinones derivatives B, 1,4-(and 1,2-)dihydroazaarenes C, tetrahydroazaarenes D and 1,3 diazepanes E thanks to either classical radical chemistry, modern photoredox catalysis or electrosynthesis (Figure 7). Bromine or chlorine atoms can be introduced at C4 position (R 2 = Ph), albeit lower yields were obtained for the chlorinated product 64b compared to brominated 64a. It is worthy to note that some of the chlorinated products 64c and 64d can be obtained in good yields, provided that the phenyl substituent at R 2 is replaced by an ester moiety. Substitu- Bromine or chlorine atoms can be introduced at C4 position (R 2 = Ph), albeit lower yields were obtained for the chlorinated product 64b compared to brominated 64a. It is worthy to note that some of the chlorinated products 64c and 64d can be obtained in good yields, provided that the phenyl substituent at R 2 is replaced by an ester moiety. Substitution of the aromatic ring was also well-tolerated, providing 64e-g without altering the isolated yields (84-92%). As far as the acetal part was concerned, aromatic acetal can be Bromine or chlorine atoms can be introduced at C4 position (R 2 = Ph), albeit lower yields were obtained for the chlorinated product 64b compared to brominated 64a. It is worthy to note that some of the chlorinated products 64c and 64d can be obtained in good yields, provided that the phenyl substituent at R 2 is replaced by an ester moiety. Substitution of the aromatic ring was also well-tolerated, providing 64e-g without altering the isolated yields (84-92%). As far as the acetal part was concerned, aromatic acetal can be replaced by aliphatic ones but at the expense of a higher reaction time and lower temperature (1h at 0 • C instead of 10 min at rt) resulting in a decrease in yield for 64h. Even THF can be introduced in high 88% isolated yield for 64i. Nevertheless, longer reaction time was required and no diastereoselectivity was observed. Regarding the mechanism and taking molecule 64i as example, the first step would be the homolytic decomposition of TBHP to generate radical intermediate A and B (Scheme 56a) followed by a hydrogen abstraction at the α position of the THF to provide a nucleophilic radical C (Scheme 56b) that added to the C2 electrophilic position of the isoquinolinium salt 62, leading to the electrophilic N-centered radical cation D. This radical cation was in resonance with E, which underwent an oxidation step by Cu(II) to provide a likely di-cation intermediate that was trapped by a bromide to furnish the corresponding iminium F, which upon deprotonation led to the desired product 64. One should note that radical intermediates C and E have been trapped by TEMPO and the adducts were characterized by HRMS. In 2019, the same group extended the methodology to the more challenging quinolinium salts 61 (Scheme 57) [67]. In this case, CuCN was found to outperform Cu(acac)2 in terms of isolated yield of the dihydroquinoline 65. Under the optimized conditions, a large number of dihydroquinolines 65 were obtained in isolated yields ranging from 44% to 87% for the addition of aromatic acetals. In line with what has previously been observed (Scheme 55), the use of chloride salts instead of bromide resulted a drop of the yield of the corresponding dihydroquinoline (79% for 65a vs. 51% for 65b). Different substituents at the quinoline nitrogen (65c-d)-including a large panel of benzyl groups (65h-j)-and aromatic quinoline ring (65e-g) were well-tolerated without altering yields. The introduction of other ethers was more complicated and generally low isolated yields and dr (for aliphatic nonsymmetric ethers) were observed for compounds 65k-m. In this case, two salient features were observed. On one hand, the addition of the ether radical occurred selectively at the C2 position. On the other hand, the halogenation took place selectively at C3 position while substitution of the C8 position was not observed (radical at C3 position obtained after the first addition of the ether radical is in resonance with the C8 position). This phenomenon was correlated by DFT calculations that exhibited a higher spin Scheme 56. Proposed mechanism for the Cu(II)-catalyzed reaction of isoquinolinium salts with ether derivatives.
In 2019, the same group extended the methodology to the more challenging quinolinium salts 61 (Scheme 57) [67]. In this case, CuCN was found to outperform Cu(acac) 2 in terms of isolated yield of the dihydroquinoline 65. Under the optimized conditions, a large number of dihydroquinolines 65 were obtained in isolated yields ranging from 44% to 87% for the addition of aromatic acetals. In line with what has previously been observed (Scheme 55), the use of chloride salts instead of bromide resulted a drop of the yield of the corresponding dihydroquinoline (79% for 65a vs. 51% for 65b). Different substituents at the quinoline nitrogen (65c-d)-including a large panel of benzyl groups (65h-j)-and aromatic quinoline ring (65e-g) were well-tolerated without altering yields. The introduction of other ethers was more complicated and generally low isolated yields and dr (for aliphatic nonsymmetric ethers) were observed for compounds 65k-m. In this case, two salient features were observed. On one hand, the addition of the ether radical occurred selectively at the C2 position. On the other hand, the halogenation took place selectively at C3 position while substitution of the C8 position was not observed (radical at C3 position obtained after the first addition of the ether radical is in resonance with the C8 position). This phenomenon was correlated by DFT calculations that exhibited a higher spin density at C3. The proposed catalytic cycle is almost the same as described in Scheme 56 except that the first step would be the in situ oxidation of CuCN to Cu(II)-Br. Pyridones 66, quinolones 67 and isoquinolinones 68 are an important class of compounds found in many natural or pharmaceutical products. Generally speaking, a twostep classical synthesis was developed consisting of the first synthesis of the N-Bn isoquinonilinium salt 62 followed by an oxidation step by an over-stoichiometric amount of K3Fe(CN)5, thus resulting in the formation of large amount of chemical waste [68]. Several research groups have turned their attention to the development of catalytic methods for the synthesis of such compounds. Nevertheless, to fulfill the scope of this review, approaches that involve the in situ generation of the isoquinolinium salts will not be discussed [69][70][71].
In that context, the group of Fu has reported on a visible light-mediated aerobic oxidation of azaarenium salts 60-62 under organic photocatalytic conditions (eosin Y (2 mol%), 40 W compact fluorescent light (CFL), Cs2CO3 (1.5 equiv.), air, THF, rt) (Scheme 58) [72]. Pyridones 66, quinolones 67 and isoquinolinones 68 are an important class of compounds found in many natural or pharmaceutical products. Generally speaking, a two-step classical synthesis was developed consisting of the first synthesis of the N-Bn isoquinonilinium salt 62 followed by an oxidation step by an over-stoichiometric amount of K 3 Fe(CN) 5 , thus resulting in the formation of large amount of chemical waste [68]. Several research groups have turned their attention to the development of catalytic methods for the synthesis of such compounds. Nevertheless, to fulfill the scope of this review, approaches that involve the in situ generation of the isoquinolinium salts will not be discussed [69][70][71].
Under standard conditions, a large panel of azaarenium salts (pyridinium 60, quinolinium 61 and isoquinolinium 62) were transformed into the corresponding dihydroazaarenones 66-68 in modest-to-excellent isolated yields. While the conditions exhibited a good functional group tolerance, the presence of electron-withdrawing groups on the aromatic ring (67e and 68b) generally resulted in higher isolated yields compared to electron-donating groups (67f and 68e). Several mechanistic experiments based on electron spin resonance (ESR), 18 O labelling experiments, radical trapping, UV-Vis and NMR spectroscopies have been undertaken to shed light on the mechanism (Scheme 59). Several salient features were underlined: (1) the incorporated oxygen atom came from O 2 rather than from H 2 O, (2) the reaction involved likely radical species, (3) single oxygen pathway was ruled out, (4) no EDA (electron donor-acceptor) complex was observed and (5) a radical chain process was implied. All these data allowed for the proposition of a plausible mechanism for the reaction. First, eosin Y (Cat14) was transformed into its excited state Cat14* thanks to irradiation under visible light. A SET process occurred to afford intermediate radical A and Cat14 •+ from 60. Then, coupling of A with O 2 provided the alkdioxyl radical B (detected by ESR), which upon hydrogen radical migration followed by another SET process delivered the oxygen-centered cation D with concomitant regeneration of the eosin Y catalyst. Meanwhile, a radical chain reaction via a SET process between 60 and C provided A and D. Finally, the oxidized product 66 was formed upon treatment. Under standard conditions, a large panel of azaarenium salts (pyridinium 60, quinolinium 61 and isoquinolinium 62) were transformed into the corresponding dihydroazaarenones 66-68 in modest-to-excellent isolated yields. While the conditions exhibited a good functional group tolerance, the presence of electron-withdrawing groups on the aromatic ring (67e and 68b) generally resulted in higher isolated yields compared to electron-donating groups (67f and 68e). Several mechanistic experiments based on electron spin resonance (ESR), 18 O labelling experiments, radical trapping, UV-Vis and NMR spectroscopies have been undertaken to shed light on the mechanism (Scheme 59). Several salient features were underlined: (1) the incorporated oxygen atom came from O2 rather than from H2O, (2) the reaction involved likely radical species, (3) single oxygen pathway was ruled out, (4) no EDA (electron donor-acceptor) complex was observed and (5) a radical chain process was implied. All these data allowed for the proposition of a plausible mechanism for the reaction. First, eosin Y (Cat14) was transformed into its excited state Cat14* thanks to irradiation under visible light. A SET process occurred to afford intermediate radical A and Cat14 •+ from 60. Then, coupling of A with O2 provided the alkdioxyl radical B (detected by ESR), which upon hydrogen radical migration followed by another SET process delivered the oxygen-centered cation D with concomitant regeneration of the eosin Y catalyst. Meanwhile, a radical chain reaction via a SET process between 60 and C provided A and D. Finally, the oxidized product 66 was formed upon treatment. Organocatalysis, a well-established catalytic strategy recently awarded the Nobel price of chemistry, has also been involved in the aerobic oxidation of azaarenium salts under photochemical conditions. In 2018, Maity and coworkers reported on the use of dimethyl phosphite organocatalyst (Cat15, 20 mol%) for the aerobic oxidation of a wide panel of quinolinium 61 and isoquinolinium salts 62 in the presence of three equivalents of a base (either K 2 CO 3 , KOH or KOt-Bu) in acetonitrile or MTBE depending upon the substrates at 40 • C (Scheme 60) [73]. Under air and light irradiation (sunlight or hood light, no reaction in the dark), an efficient reaction took place thus leading to the corresponding (iso)quinolones 67 and 68 with generally high isolated yields (26 examples, 47-92%) for a wide variety of substituents (alkyl, electron-donating or -withdrawing groups both on the nitrogen-containing ring or on the aromatic carbocyclic part). One should note that products 66 and 69 were not observed, as the corresponding pyridinium salts or cyclic iminiums precursors were reluctant under optimized conditions. The authors have also successfully developed an oxidative kinetic resolution reaction using chiral phosphite Cat16 derived from TADDOL using DABCO as a base in DCE at 0 • C. Compound 68j (R 2 = H) was obtained in 70% ee (45% conversion, s factor 12.3) and product 68k (R 2 = Me) in 64% ee (40% conversion, s factor 9.6). Taking isoquinolinium salt 62 as a model and based upon UV-VIS measurements (no adsorption of 62 but adsorption of the adduct A and Stern-Volmer quenching experiments indicating a concentration and time-dependent decrease in fluorescence in the presence of 62), the following mechanism was proposed (Scheme 61). At first, deprotonated phosphite catalyst Cat15 − was added to 62 to provide the adduct A that, upon visible light excitation, underwent a SET process with the starting 62 to afford the corresponding radical 62 • and the radical cation A +• . The C-H acidity of the latter species was greatly increased affording the deprotonation via a base to provide the corresponding radical A • . Simultaneously, 62 • transferred one electron to O2 to regenerate 62 and to produce superoxide (O2 −• ). Finally, A • reacted with either superoxide (O2 −• ) or oxygen to afford the desired product 68 with concomitant regeneration of the deprotonated phosphite catalyst Cat15 − . Scheme 60. Photoredox-catalyzed aerobic oxidation of azaareniums salts in the presence of phosphite catalyst.
Taking isoquinolinium salt 62 as a model and based upon UV-VIS measurements (no adsorption of 62 but adsorption of the adduct A and Stern-Volmer quenching experiments indicating a concentration and time-dependent decrease in fluorescence in the presence of 62), the following mechanism was proposed (Scheme 61). At first, deprotonated phosphite catalyst Cat15 − was added to 62 to provide the adduct A that, upon visible light excitation, underwent a SET process with the starting 62 to afford the corresponding radical 62 • and the radical cation A +• . The C-H acidity of the latter species was greatly increased affording the deprotonation via a base to provide the corresponding radical A • . Simultaneously, 62 • transferred one electron to O 2 to regenerate 62 and to produce superoxide (O 2 −• ). Finally, A • reacted with either superoxide (O 2 −• ) or oxygen to afford the desired product 68 with concomitant regeneration of the deprotonated phosphite catalyst Cat15 − . phosphite catalyst Cat15 was added to 62 to provide the adduct A that, upon visible light excitation, underwent a SET process with the starting 62 to afford the corresponding radical 62 • and the radical cation A +• . The C-H acidity of the latter species was greatly increased affording the deprotonation via a base to provide the corresponding radical A • . Simultaneously, 62 • transferred one electron to O2 to regenerate 62 and to produce superoxide (O2 −• ). Finally, A • reacted with either superoxide (O2 −• ) or oxygen to afford the desired product 68 with concomitant regeneration of the deprotonated phosphite catalyst Cat15 − . Scheme 61. Proposed mechanism for the photoredox-catalyzed aerobic oxidation of azaareniums salts in the presence of phosphite catalyst.
In 2021, the group of Yadav has reported on the use of chlorophyll a (Chla) as a photocatalyst for the synthesis of quinolinones 67 and isoquinolinones 68 from the corresponding quinolinium 61 and isoquinolinium salts 62, respectively, by a selective photo-induced electron transfer (PET) and energy transfer (EnT) process (Scheme 62) [74]. Under the optimized conditions (Chla (12 ppm), Cs 2 CO 3 (1.5 equiv), DABCO (1.5 equiv), 3 W blue LED, 2MeTHF/THF, rt, air), the reaction proved to be efficient (61-89%) even if a narrow scope was reported (12 examples). Both quinolones 67 and isoquinolones 68 tolerate the presence of halogen, methyl or nitro group without altering the isolated yield. The alkyl chain on the nitrogen can also be lengthened but at the expense of the isolated yields which dropped from 87% to 79% for the isoquinolone series (68a, R = Me vs. 68d, R = n-Pr) and from 85% to 67% in the quinolinone series (67b, R = Me vs. 67g, R = n-Pr). Nevertheless, this phenomenon has not been observed when the aromatic ring was substituted by a Cl at position 5 (83% for 68l and 68m). As for the previous work of Maity et al. [73], under these conditions, pyridinium salts remained unreactive and the corresponding pyridinone compounds 66 were not observed. The mechanism proposed by the authors is the same as the one described by the group of Fu except that chlorophyll a was used as a photocatalyst instead of eosin Y (see Scheme 59). In 2021, the group of Yadav has reported on the use of chlorophyll a (Chla) as a photocatalyst for the synthesis of quinolinones 67 and isoquinolinones 68 from the corresponding quinolinium 61 and isoquinolinium salts 62, respectively, by a selective photoinduced electron transfer (PET) and energy transfer (EnT) process (Scheme 62) [74]. Under the optimized conditions (Chla (12 ppm), Cs2CO3 (1.5 equiv), DABCO (1.5 equiv), 3 W blue LED, 2MeTHF/THF, rt, air), the reaction proved to be efficient (61-89%) even if a narrow scope was reported (12 examples). Both quinolones 67 and isoquinolones 68 tolerate the presence of halogen, methyl or nitro group without altering the isolated yield. The alkyl chain on the nitrogen can also be lengthened but at the expense of the isolated yields which dropped from 87% to 79% for the isoquinolone series (68a, R = Me vs. 68d, R = n-Pr) and from 85% to 67% in the quinolinone series (67b, R = Me vs. 67g, R = n-Pr). Nevertheless, this phenomenon has not been observed when the aromatic ring was substituted by a Cl at position 5 (83% for 68l and 68m). As for the previous work of Maity et al. [73], under these conditions, pyridinium salts remained unreactive and the corresponding pyridinone compounds 66 were not observed. The mechanism proposed by the authors is the same as the one described by the group of Fu except that chlorophyll a was used as a photocatalyst instead of eosin Y (see scheme 59). In 2020, Li and coworkers described a visible light-induced dearomatization reaction of pyridinium 60, quinolinium 61 and isoquiniolinium 62 salts by a three-component approach involving a sodium sulfinate 33 and an alkene 4 [75]. The first step of this transformation was the formation of a sulfonyl radical A upon oxidation of the sodium sulfinate 33 by the excited Ru-photocatalyst (*Ru(bpy)3 2+ = *Cat17 2+ ) (Scheme 63). This sulfinate rad-Scheme 62. Photoredox-catalyzed aerobic oxidation of azaareniums salts in the presence of chlorophyll a catalyst.
In 2020, Li and coworkers described a visible light-induced dearomatization reaction of pyridinium 60, quinolinium 61 and isoquiniolinium 62 salts by a three-component approach involving a sodium sulfinate 33 and an alkene 4 [75]. The first step of this transformation was the formation of a sulfonyl radical A upon oxidation of the sodium sulfinate 33 by the excited Ru-photocatalyst (*Ru(bpy) 3 2+ = *Cat17 2+ ) (Scheme 63). This sulfinate radical A then added to the alkene partner 4 to generate a new radical B that was nucleophilic enough to add to the pyridinium salt 60 at the position C4 exclusively to provide a radical cation C which, upon reduction by the reduced Ru-photocatalyst (Ru(bpy) 3 + = Cat17 + ) thanks to a SET process, afforded the desired 1,4-dihydropyridine 17. An alternative mechanism, involving the generation of a carbon-centered radical D generated by the reduction in the pyridinium salt (by the reduced Ru-photocatalyst, Ru(bpy) 3 + = Cat17 + ) followed by a radical coupling with B to provide 17 cannot totally be ruled out, as traces of pyridine derivatives have been observed using GC-MS analysis. Thus, by applying this strategy (Cat17 (1 mol%), 5 W blue LED, DMA, rt), more than 30 substituted dihydroazaarenes 17, 64, 70 were obtained in isolated yields ranging from 38% to 95% starting from the corresponding azaarenium salts 60-62 (Scheme 64). Regarding the substitution of the 1,4-dihydropyridine 17, several alkyl groups (17b (Cy, 94%), 17c (c-pent, 84%), 17b (n-Bu, 91%)) can be introduced on the nitrogen atom without significant influence on the yields. A 2,4,6-triphenyl substitution pattern (17b-d) was welltolerated as well as C4-substitution by a CO2Me group (17e). The nature of the anion was demonstrated to be crucial as I − (18% yield) provided significant drop in the yield compared to BF4 or PF6 anions (82% and 83%) for 17e. The substitution of alkene partner 4 has also been studied. Whereas 4-MeO phenyl 17b provided the best result in terms of isolated yield (94%), other substituents on the aromatic ring of the alkene partner (17f (4-CF3, 64%), 17g (4-Me, 88%), 17h (2-OMe, 90%), 17i (3-OMe, 73%)) have also been successfully introduced. Naphthyl or styryl gave the corresponding dihydropyridines 17j and 17k in 72% and 75% yields, respectively. The alkene with a substituent at the β-position provided the desired product 17m albeit in modest a 47% isolated yield but high diastereoselectivity (>20:1 dr). It is worthy of note that alkene with an aliphatic substituent (17l, n-hexyl) was not reactive under the standard conditions. The sodium sulfinate 33 can also be diversely substituted. Aryl sodium sulfinates with para substituent (OMe, Me, Br, CN), thiophen-2yl sodium sulfinate or methyl sodium sulfinate were also eligible for this reaction providing the corresponding desired products 17n-s in isolated yield above 70%. Moving from pyridinium salts 60 to quinolinium 61 or isoquinolinium salts 62 resulted in a drop of the isolated yields in the corresponding dihydroisoquinoline 64j (45%, 2:1) and dihydroquinoline 70a (33%, >20:1).

Scheme 63.
Proposed mechanism for the photoredox-catalyzed reaction of azaareniums salts with alkenes.
Thus, by applying this strategy (Cat17 (1 mol%), 5 W blue LED, DMA, rt), more than 30 substituted dihydroazaarenes 17, 64, 70 were obtained in isolated yields ranging from 38% to 95% starting from the corresponding azaarenium salts 60-62 (Scheme 64). Regarding the substitution of the 1,4-dihydropyridine 17, several alkyl groups (17b (Cy, 94%), 17c (c-pent, 84%), 17b (n-Bu, 91%)) can be introduced on the nitrogen atom without significant influence on the yields. A 2,4,6-triphenyl substitution pattern (17b-d) was well-tolerated as well as C4-substitution by a CO 2 Me group (17e). The nature of the anion was demonstrated to be crucial as I − (18% yield) provided significant drop in the yield compared to BF 4 or PF 6 anions (82% and 83%) for 17e. The substitution of alkene partner 4 has also been studied. Whereas 4-MeO phenyl 17b provided the best result in terms of isolated yield (94%), other substituents on the aromatic ring of the alkene partner (17f (4-CF 3 , 64%), 17g (4-Me, 88%), 17h (2-OMe, 90%), 17i (3-OMe, 73%)) have also been successfully introduced. Naphthyl or styryl gave the corresponding dihydropyridines 17j and 17k in 72% and 75% yields, respectively. The alkene with a substituent at the β-position provided the desired product 17m albeit in modest a 47% isolated yield but high diastereoselectivity (>20:1 dr). It is worthy of note that alkene with an aliphatic substituent (17l, n-hexyl) was not reactive under the standard conditions. The sodium sulfinate 33 can also be diversely substituted. Aryl sodium sulfinates with para substituent (OMe, Me, Br, CN), thiophen-2-yl sodium sulfinate or methyl sodium sulfinate were also eligible for this reaction providing the corresponding desired products 17n-s in isolated yield above 70%. Moving from pyridinium salts 60 to quinolinium 61 or isoquinolinium salts 62 resulted in a drop of the isolated yields in the corresponding dihydroisoquinoline 64j (45%, 2:1) and dihydroquinoline 70a (33%, >20:1). In 2020, the group of Dixon reported the dearomatization of quinoline 34 by reaction with imines 71 under photoredox conditions (blue LED and Ir photocatalyst Cat8) to provide bridged 1,3-diazepanes 72 (Scheme 65) [76]. During the study of the reaction, only one example was reported using the more activated N-benzyl quinolinium salt 61a derived from lepidine. The N-benzyl-1,3-diazepane product 72b was obtained albeit with significant loss in both yield and diastereoselectivity compared to the 1,3-diazepane 72a (51%, 1.0:1.0 dr vs. 82%, 3.2:1.0 dr, respectively). The N-methylledipidium salt 61b was reluctant to the photochemical conditions, thus resulting in the formation of the dealkylation product. Extensive mechanistic study was performed to explain the formation of N-H 1,3-diazepanes 72; in particular, the role of the Lewis acid (Zn(OTf)2) was demonstrated to allow the imine partner 71 to be more easily reduced than the quinoline derivative 34. The coordination of the Lewis acid to the imine partner 71 rather than to the quinoline 34 was also supported by the fact that Lewis acid was still beneficial for the reaction with quinolinium salt 61. Nevertheless, no mechanism was reported for the specific case of quinolinium salt 61. In 2020, the group of Dixon reported the dearomatization of quinoline 34 by reaction with imines 71 under photoredox conditions (blue LED and Ir photocatalyst Cat8) to provide bridged 1,3-diazepanes 72 (Scheme 65) [76]. During the study of the reaction, only one example was reported using the more activated N-benzyl quinolinium salt 61a derived from lepidine. The N-benzyl-1,3-diazepane product 72b was obtained albeit with significant loss in both yield and diastereoselectivity compared to the 1,3-diazepane 72a (51%, 1.0:1.0 dr vs. 82%, 3.2:1.0 dr, respectively). The N-methylledipidium salt 61b was reluctant to the photochemical conditions, thus resulting in the formation of the dealkylation product. Extensive mechanistic study was performed to explain the formation of N-H 1,3-diazepanes 72; in particular, the role of the Lewis acid (Zn(OTf) 2 ) was demonstrated to allow the imine partner 71 to be more easily reduced than the quinoline derivative 34. The coordination of the Lewis acid to the imine partner 71 rather than to the quinoline 34 was also supported by the fact that Lewis acid was still beneficial for the reaction with quinolinium salt 61. Nevertheless, no mechanism was reported for the specific case of quinolinium salt 61.
In 2021, Baran et al. have described a Minisci reaction using malonate-derived substituents on the pyridine nitrogen as a blocking group to afford C4 selective alkylation of the pyridine in the presence of two equivalents of ammonium persulfates as a chemical oxidant and two equivalents of carboxylic acid as radical precursor [77]. Two years later, Zhang, Yang and coworkers published an improved procedure using a photoredox-catalyzed approach that avoided the use of more than a stoichiometric amount of oxidant under neutral conditions (use of NHPI-derived redox-esters 26 as radical precursor instead of a carboxylic acid) [78]. Under standard conditions (iridium catalysts (1 mol%), 35 W blue LED, DMA, rt), several alkylated pyridines 44 were obtained after removal of the blocking group (DBU, DCM, rt) in moderate-to-excellent isolated yields (44-94%) (Scheme 66). Interestingly, the presence of the malonate-derived blocking group on the nitrogen revealed to be crucial for the control of the regioselectivity of the radical addition, thus providing a good-to-excellent C4/C2 ratio (>3.7:1). Primary radicals were well-tolerated (44ay-44az) even if the C4/C2 ratios were lower than those observed with secondary (44as-aw) or tertiary radicals (44ax and 44ba), with the tertiary radical providing the C4 adduct exclusively. It is worth noting that drug molecules such as Gemfibrozil (via its corresponding NHPI) can be straightforwardly prepared through this methodology (44ba, 74%). The substitution pattern of the pyridine ring was also tackled during the introduction of a cyclohexyl pendant at C4 position (R 1 = Cy). Methyl (44bb) and CH 2 CO 2 Et (44be) at C3 position provided the desired product in high yields (84% and 75%) and complete C4 regioselectivity, whereas CO 2 Et (44bd) and to a lesser extent Ph (44bc, in addition to a drop of the C4/C2 ratio to 10.8:1) provided significantly lower yields of 46% and 65%. In 2021, Baran et al. have described a Minisci reaction using malonate-derived substituents on the pyridine nitrogen as a blocking group to afford C4 selective alkylation of the pyridine in the presence of two equivalents of ammonium persulfates as a chemical oxidant and two equivalents of carboxylic acid as radical precursor [77]. Two years later, Zhang, Yang and coworkers published an improved procedure using a photoredox-catalyzed approach that avoided the use of more than a stoichiometric amount of oxidant under neutral conditions (use of NHPI-derived redox-esters 26 as radical precursor instead of a carboxylic acid) [78]. Under standard conditions (iridium catalysts (1 mol%), 35 W blue LED, DMA, rt), several alkylated pyridines 44 were obtained after removal of the blocking group (DBU, DCM, rt) in moderate-to-excellent isolated yields (44-94%) (Scheme 66). Interestingly, the presence of the malonate-derived blocking group on the nitrogen revealed to be crucial for the control of the regioselectivity of the radical addition, thus providing a good-to-excellent C4/C2 ratio (>3.7:1). Primary radicals were well-tolerated (44ay-44az) even if the C4/C2 ratios were lower than those observed with secondary (44as-aw) or tertiary radicals (44ax and 44ba), with the tertiary radical providing the C4 adduct exclusively. It is worth noting that drug molecules such as Gemfibrozil (via its corresponding NHPI) can be straightforwardly prepared through this methodology (44ba, 74%). The substitution pattern of the pyridine ring was also tackled during the introduction of a cyclohexyl pendant at C4 position (R 1 = Cy). Methyl (44bb) and CH2CO2Et (44be) at C3 position provided the desired product in high yields (84% and 75%) and complete C4 regioselectivity, whereas CO2Et (44bd) and to a lesser extent Ph (44bc, in addition to a drop of the C4/C2 ratio to 10.8:1) provided significantly lower yields of 46% and 65%. The first step of the mechanism was considered to be the formation of *Cat8 III by light irradiation of Cat8 III (Scheme 67). Then, Cat8 II might be generated from *Cat8 III using the solvent as a sacrificial oxidant or an anion generated from the decomposition of NHPI esters. The NHPI derivative 26 could then be reduced by Cat8 II to the corresponding radical anion A via a SET pathway followed by elimination of a phthalimidate ion to provide the radical B, which upon decarboxylation finally afforded the alkyl radical C. Then, the latter radical was added regioselectively at the C4 position of the pyridinium salt 60, giving rise to the corresponding N-centered radical cation D. *Cat8 III would then oxidize the Scheme 66. Photoredox-catalyzed reaction of pyridinium salts with NHPI redox-active ester.
The first step of the mechanism was considered to be the formation of *Cat8 III by light irradiation of Cat8 III (Scheme 67). Then, Cat8 II might be generated from *Cat8 III using the solvent as a sacrificial oxidant or an anion generated from the decomposition of NHPI esters. The NHPI derivative 26 could then be reduced by Cat8 II to the corresponding radical anion A via a SET pathway followed by elimination of a phthalimidate ion to provide the radical B, which upon decarboxylation finally afforded the alkyl radical C. Then, the latter radical was added regioselectively at the C4 position of the pyridinium salt 60, giving rise to the corresponding N-centered radical cation D. *Cat8 III would then oxidize the radical cation D to the pyridinium E by concomitant deprotonation via the phthalimidate ion and subsequent regeneration of Cat8 II . The desired alkylated pyridines 44 were obtained by treatment with DBU. Scheme 66. Photoredox-catalyzed reaction of pyridinium salts with NHPI redox-active ester.
The first step of the mechanism was considered to be the formation of *Cat8 III by light irradiation of Cat8 III (Scheme 67). Then, Cat8 II might be generated from *Cat8 III using the solvent as a sacrificial oxidant or an anion generated from the decomposition of NHPI esters. The NHPI derivative 26 could then be reduced by Cat8 II to the corresponding radical anion A via a SET pathway followed by elimination of a phthalimidate ion to provide the radical B, which upon decarboxylation finally afforded the alkyl radical C. Then, the latter radical was added regioselectively at the C4 position of the pyridinium salt 60, giving rise to the corresponding N-centered radical cation D. *Cat8 III would then oxidize the radical cation D to the pyridinium E by concomitant deprotonation via the phthalimidate ion and subsequent regeneration of Cat8 II . The desired alkylated pyridines 44 were obtained by treatment with DBU. Scheme 67. Proposed mechanism for the photoredox-catalyzed reaction of pyridinium salts with NHPI redox-active ester.
Although electrosynthesis has a long-standing history, this technique has faced a revival at the beginning of the 2010 s in the quest for greener processes (replacement of stoichiometric amount of generally toxic oxidant/reductant by simple electrons). It is not surprising that an electrochemical dearomatization of pyridinium was reported by Schäfer et al. as early as 1995, which is worthy of note as a pioneering contribution. Indeed, the authors developed a cathodic cyclization of several oxoalkyl pyridinium salts 60 to provide the corresponding heterocycles 73 (n = 1), 74 (n = 2) and 75 (n = 3) (Scheme 68) [79].
Under galvanostatic conditions (constant current), several quinolizidines and indolizidines were obtained as a mixture of inseparable double bond isomers 74-74 and 75-75 , respectively, in moderate isolated yields ranging from 41 to 62% (Scheme 68a). For unsubstituted pyridinium salts, product 74a was obtained as a 1.3:1 ratio of 74a vs. 74 a. The substitution of the ortho position of pyridinium salt by a methyl group (R 1 = CH 3 ) resulted in the selective addition at C6 position (only traces of C2 addition was observed) to provide the corresponding 74b in 40% yield. The substitution of the meta position (R 2 = CH 3 ) of pyridinium salt provided the corresponding quinolizidines 77c in moderate 45% yield as a complex mixture of six diastereoisomers. The substitution of the para position (74d) delivered similar results to those obtained for unsubstituted product 74a. The seven-membered ring 75 (n = 3) was also obtained but at a very low yield of 14%. Indolizidine derivative 73a was also accessible, provided that an acetal precursor 60a was used instead of the ketone. In this case, 73a was isolated in a 55% yield as a single double-bond isomer. Regarding the mechanism (Scheme 68b), a radical would be obtained after a first protonation/reduction sequence. Among the two conformations A and B of the radical, conformation A would be privileged thanks to hydrogen bond between the hydroxy and the nitrogen groups (AM1 calculation revealed that nitrogen in the radical cation displays a partial negative charge), whereas steric clash would disfavor conformation B. Then, a further SET reduction process provided dihydropyridine derivatives C, which upon further protonation/reduction sequence delivered 74 and 74 . Worthy to note, the configuration of 74a was proven by X-ray analysis.
Molecules 2023, 28, x FOR PEER REVIEW 46 of 50 Scheme 67. Proposed mechanism for the photoredox-catalyzed reaction of pyridinium salts with NHPI redox-active ester.
Although electrosynthesis has a long-standing history, this technique has faced a revival at the beginning of the 2010′s in the quest for greener processes (replacement of stoichiometric amount of generally toxic oxidant/reductant by simple electrons). It is not surprising that an electrochemical dearomatization of pyridinium was reported by Schäfer et al. as early as 1995, which is worthy of note as a pioneering contribution. Indeed, the authors developed a cathodic cyclization of several oxoalkyl pyridinium salts 60 to provide the corresponding heterocycles 73 (n = 1), 74 (n = 2) and 75 (n = 3) (Scheme 68) [79]. Under galvanostatic conditions (constant current), several quinolizidines and indolizidines were obtained as a mixture of inseparable double bond isomers 74-74′ and 75-75′, respectively, in moderate isolated yields ranging from 41 to 62% (Scheme 68a). For unsubstituted pyridinium salts, product 74a was obtained as a 1.3:1 ratio of 74a vs. 74′a. The substitution of the ortho position of pyridinium salt by a methyl group (R 1 = CH3) resulted in the selective addition at C6 position (only traces of C2 addition was observed) to provide the corresponding 74b in 40% yield. The substitution of the meta position (R 2 = CH3) of pyridinium salt provided the corresponding quinolizidines 77c in moderate 45% yield as a complex mixture of six diastereoisomers. The substitution of the para position (74d) delivered similar results to those obtained for unsubstituted product 74a. The sevenmembered ring 75 (n = 3) was also obtained but at a very low yield of 14%. Indolizidine derivative 73a was also accessible, provided that an acetal precursor 60a was used instead of the ketone. In this case, 73a was isolated in a 55% yield as a single double-bond isomer. Regarding the mechanism (Scheme 68b), a radical would be obtained after a first protonation/reduction sequence. Among the two conformations A and B of the radical, conformation A would be privileged thanks to hydrogen bond between the hydroxy and the nitrogen groups (AM1 calculation revealed that nitrogen in the radical cation displays a partial negative charge), whereas steric clash would disfavor conformation B. Then, a

Conclusions
Numerous examples from the recent literature have testified how modern catalytic and technology-driven strategies facilitate the implementation of radical-based chemistry in a more convenient fashion while expanding the scope of numerous synthetic methodologies. This impetus in the use of highly reactive radical species allowed the investigation of novel reactivity profiles and functional group transformations based on better controlled single-electron transfer events. In this review, we have highlighted the advantage, complementarity and originality of employing N,N-disubstituted iminium motif instead of more regular imine or protonated iminium salt derivatives in radical transformations. On the one hand, dipole-type iminium derivatives proved to be highly versatile platforms, with enhanced reactivity profiles in radical addition reactions, thereby allowing annulation, cycloaddition or transposition reactions to take place, especially with azaarenium salts for the latter. Additionally, the N-Alkylazaarenium structures afford new opportunities for the dearomatization sequences opening routes to valuable Csp 3 -rich azaheterocycles. Nevertheless, one can consider that the regioselectivity of the radical species additions, while being improved, are still a matter of investigation for azaarenium platforms. Electrosynthesis and electrocatalysis, regardless of the approach employed, remained underexploited in this type of chemistry in comparison to photoredox and metal-based catalysis, and will undoubtedly face important developments in the near future. Most importantly, the development of asymmetric syntheses in this field of research still remains in its infancy, leaving important room for novel investigations. We do hope this overview of recent examples in that field of investigations will serve as a tool to trigger novel developments and applications on radical-based transformations of N-tertiary iminium derivatives.