Recent Advances in the Use of Diorganyl Diselenides as Versatile Catalysts

The importance of organoselenium compounds has been increasing in synthetic chemistry. These reagents are well-known as electrophiles and nucleophiles in many organic transformations, and in recent years, their functionality as catalysts has also been largely explored. The interest in organoselenium-based catalysts is due to their high efficacy, mild reaction conditions, strong functional compatibility, and great selectivity. Allied to organoselenium catalysts, the use of inorganic and organic oxidants that act by regenerating the catalytic species for the reaction pathway is common. Here, we provide a comprehensive review of the last five years of organic transformations promoted by diorganyl diselenide as a selenium-based catalyst. This report is divided into four sections: (1) cyclisation reactions, (2) addition reactions and oxidative functionalisation, (3) oxidation and reduction reactions, and (4) reactions involving phosphorus-containing starting materials.


Introduction
Selenium is an essential trace element in diets, discovered in the 18th century by the Swedish chemist Jöns Jacob Berzelius.Although the toxic properties of selenium compounds have been reported, this is a metabolisable element that does not accumulate in organisms [1][2][3][4].Nowadays, organoselenium compounds play an important role in different fields, such as medicinal chemistry, organic synthesis, and materials science.The biological and medicinal interests in organoselenium compounds are mainly related to their antioxidant, anti-inflammatory, anticancer, and antimicrobial properties, among other properties [5][6][7].The interest of organic chemists was generated by the discovery of the selenoxide elimination reaction in the early 1970s.Since then, an extraordinary number of different reactions have been developed once selenium reagents showed their versatility to be applied as electrophiles and nucleophiles.Therefore, a considerable number of divalent and stable species of selenium compounds have been described in the literature.Among these, we can highlight the selenides, diselenides, and selenoesters (Figure 1) [8][9][10][11][12][13].In the past decade, organoselenium chemistry has been extensively reviewed in the literature, focused on its synthesis and biological applications, as well as its use as intermediates and catalysts in organic transformations [23][24][25][26][27].However, the use of diorganyl diselenides as catalysts has not been considered in the literature as a separate subject and is poorly detailed.In this sense, to improve the understanding of the application of diorganyl diselenide as a catalyst, the review was divided into four sections: The mechanism proposed by the authors starts with the formation of electrophilic selenium species I through the reaction of diphenyl diselenide A with Selectfluor ® .Electrophilic intermediate I reacts with ynamide 1 to form seleniranium II, which is in equilibrium with stable keteniminium ion III.Afterwards, acetonitrile 2 reacts with intermediate III, followed by hydrolysis to give intermediate V. Thereafter, the isomerisation of intermediate V leads to VI, which, in the presence of Selectfluor ® , can be oxidised to produce intermediate VII.Finally, the target oxazole 3 is formed by the elimination of the selenium group of intermediate VII by attacking the carbonyl group, followed by isomerisation (Scheme 3).
Previous reports described using selenium-π-acids as efficient catalysts to promote the reaction of alkenes with carboxylic acids or hydrogen phosphates under aerobic conditions.In this regard, Breder and his research group [29] described the new organocatalytic and visible light protocol for the synthesis of cyclic ethers 7 (intramolecular reaction).In this new organocatalytic approach, a light-induced electron transfer process was applied in the reaction with alcohol 6 by using an aerobic dehydrogenative allylic etherification reaction, utilising ambient air as the terminal oxidant (Scheme 4).
The best conditions for the aerobic cycloetherification of unsaturated alcohols 6 was established when these starting materials were reacted in the presence of 5 mol% of bis(2methoxyphenyl) diselenide B as a catalyst, 3 mol% of 2,4,6-tris(4-anisyl)pyrylium tetrafluoroborate (TAPT), 0.8 equiv. of NaH 2 PO 4 , atmospheric air, MeCN (0.2 M) as a solvent, and hν [light emitting diode (LED) irradiation at 465 nm] for 7-28 h at r.t.Under these conditions, the targets tetrahydrofuran and tetrahydropyran 7 (20 compounds) were obtained in yields ranging from low to good (25-72%).This method tolerates several starting materials 6 functionalised with nitrile, ester, halogen, carbonate, ether, imide, and unprotected hydroxy groups, as well as primary and secondary alcohols (Scheme 4).Previous reports described using selenium-π-acids as efficient catalysts to promote the reaction of alkenes with carboxylic acids or hydrogen phosphates under aerobic conditions.In this regard, Breder and his research group [29] described the new organocatalytic and visible light protocol for the synthesis of cyclic ethers 7 (intramolecular reaction).In this new organocatalytic approach, a light-induced electron transfer process was applied in the reaction with alcohol 6 by using an aerobic dehydrogenative allylic etherification reaction, utilising ambient air as the terminal oxidant (Scheme 4).Scheme 4. Synthesis of cyclic ethers 7 by intramolecular reaction [29].Previous reports described using selenium-π-acids as efficient catalysts to promote the reaction of alkenes with carboxylic acids or hydrogen phosphates under aerobic conditions.In this regard, Breder and his research group [29] described the new organocatalytic and visible light protocol for the synthesis of cyclic ethers 7 (intramolecular reaction).In this new organocatalytic approach, a light-induced electron transfer process was applied in the reaction with alcohol 6 by using an aerobic dehydrogenative allylic etherification reaction, utilising ambient air as the terminal oxidant (Scheme 4).Scheme 4. Synthesis of cyclic ethers 7 by intramolecular reaction [29].Scheme 4. Synthesis of cyclic ethers 7 by intramolecular reaction [29].
Breder and co-workers [30], in 2019, described the use of cyclic and noncyclic chiral selenium-π-acid catalysts, such as the derivatives of (−)-menthol F, (−)-8-phenylmenthol G, (−)-borneol E, and (R)-BINOL H, in the enantioselective aerobic intramolecular lactonisation of 5-phenylpent-3-enoic acid 8a.This starting material was reacted in the presence of 10 mol% of diselenides and 5 mol% of TAPT, using acetonitrile as the solvent under atmospheric air and 465 nm irradiation for 20 h.When carbonate D-or acetal C-protected 1,2-diol derivatives of the cyclic diselenide were tested, low and moderate yields as well Molecules 2023, 28, 6614 5 of 50 as a poor enantiomeric ratios (e.r.) for compound 9a were obtained: 11% (50:50) and 44% (39:61), respectively.The diselenide derivatives of (−)-borneol E and (R)-BINOL H were efficiently applied, yielding the intramolecular product 9a at 81% and 78%, respectively, but with a low e.r.On the other hand, when the diselenide derivatives of (−)-menthol F and (−)-8-phenylmenthol G were tested, lactonisation product 9a was formed with good yields (70% and 68%, respectively).In these cases, the catalyst F derivative of (−)-menthol gave a lower e.r.(59.5:40.5)when compared to the catalyst G derivative of (−)-8-phenylmenthol.Additionally, the diselenide containing chiral oxazole derivative I was checked in this reaction.The authors suggested that catalyst I suffered degradation under photoredox conditions, and the reaction did not occur.Despite the high number of different diorganyl diselenides studied as a catalyst, the authors did not explore the expansion nor the limitations of the method of other starting materials (Scheme 5).
Breder and co-workers [30], in 2019, described the use of cyclic and noncyclic chiral selenium-π-acid catalysts, such as the derivatives of (−)-menthol F, (−)-8-phenylmenthol G, (−)-borneol E, and (R)-BINOL H, in the enantioselective aerobic intramolecular lactonisation of 5-phenylpent-3-enoic acid 8a.This starting material was reacted in the presence of 10 mol% of diselenides and 5 mol% of TAPT, using acetonitrile as the solvent under atmospheric air and 465 nm irradiation for 20 h.When carbonate D-or acetal Cprotected 1,2-diol derivatives of the cyclic diselenide were tested, low and moderate yields as well as a poor enantiomeric ratios (e.r.) for compound 9a were obtained: 11% (50:50) and 44% (39:61), respectively.The diselenide derivatives of (−)-borneol E and (R)-BINOL H were efficiently applied, yielding the intramolecular product 9a at 81% and 78%, respectively, but with a low e.r.On the other hand, when the diselenide derivatives of (−)menthol F and (−)-8-phenylmenthol G were tested, lactonisation product 9a was formed with good yields (70% and 68%, respectively).In these cases, the catalyst F derivative of (−)-menthol gave a lower e.r.(59.5:40.5)when compared to the catalyst G derivative of (−)-8-phenylmenthol.Additionally, the diselenide containing chiral oxazole derivative I was checked in this reaction.The authors suggested that catalyst I suffered degradation under photoredox conditions, and the reaction did not occur.Despite the high number of different diorganyl diselenides studied as a catalyst, the authors did not explore the expansion nor the limitations of the method of other starting materials (Scheme 5).Scheme 5. Catalyst evaluation for the synthesis of 9a [30].
In 2019, Denmark and co-workers described [31] the use of chiral and enantioenriched diselenides J-L as catalysts in the reaction of N,N′-bistosyl urea 10 with simple alkene 11 to synthesise imidazolidin-2-one 12 by using the first intermolecular Scheme 5. Catalyst evaluation for the synthesis of 9a [30].
A moderate yield (59%) of target 1,2-ditosyl imidazolidin-2-one 12a was obtained when diphenyl diselenide A was used as a catalyst; however, in this case, no e.r. was reported by the authors.Subsequently, chiral diselenide catalysts J-L were evaluated, and in all cases, the yield and e.r.increased.Similar yields for 12a were obtained when using the catalyst substituted with O-TBDMS ( t butyldimethylsilyl)-protected group J, benzoate ester K, and 2-naphthoate ester L (89%, 87%, and 89%, respectively).Moreover, catalysts J-L demonstrated good e.r. but had better results when the 2-naphthoate ester L derivative was used as catalyst (an e.r. of 12a = 93:7).The chiral diselenides induced excellent selectivity in the products; however, they are not readily available and need a few steps for their preparation (Scheme 6).
A moderate yield (59%) of target 1,2-ditosyl imidazolidin-2-one 12a was obtained when diphenyl diselenide A was used as a catalyst; however, in this case, no e.r. was reported by the authors.Subsequently, chiral diselenide catalysts J-L were evaluated, and in all cases, the yield and e.r.increased.Similar yields for 12a were obtained when using the catalyst substituted with O-TBDMS ( t butyldimethylsilyl)-protected group J, benzoate ester K, and 2-naphthoate ester L (89%, 87%, and 89%, respectively).Moreover, catalysts J-L demonstrated good e.r. but had better results when the 2-naphthoate ester L derivative was used as catalyst (an e.r. of 12a = 93:7).The chiral diselenides induced excellent selectivity in the products; however, they are not readily available and need a few steps for their preparation (Scheme 6).
The standard conditions were efficiently applied to diaryl, aryl-alkyl, and dialky alkenes 11 in a reaction with N,N′-bis tosyl urea 10, obtaining a wide range of 1,2-ditosy imidazolidine-2-ones 12 (26 products).In general, the yields of the 12 compounds ranged from moderate to excellent (44-89%), except for compounds 12f and 12o, which were obtained with lower yields.Compound 12o was formed at 18% with a high e.r.(93:7) whereas compound 12f was isolated at a 31% yield but showed a significant decrease in e.r.(59:41) (Scheme 7).The standard conditions were efficiently applied to diaryl, aryl-alkyl, and dialkyl alkenes 11 in a reaction with N,N -bis tosyl urea 10, obtaining a wide range of 1,2-ditosyl imidazolidine-2-ones 12 (26 products).In general, the yields of the 12 compounds ranged from moderate to excellent (44-89%), except for compounds 12f and 12o, which were obtained with lower yields.Compound 12o was formed at 18% with a high e.r.(93:7), whereas compound 12f was isolated at a 31% yield but showed a significant decrease in e.r.(59:41) (Scheme 7).Moreover, in 2019, Hashimoto and co-workers [32] described the synthesis of diselenide M, as well as its application as a chiral selenium π-acid catalyst in the iminolactonisation of N-methoxy β,γ-unsaturated amide 13, with high enantioselectivity induced by chiral diorganyl diselenide M (Scheme 9).In this approach, β,γ-unsaturated amide 13 is reacted in the presence of 5 mol% of diselenide M as a catalyst (3 equiv. of CaCO3, 1.05 equiv. of N-fluorobenzenesulfonimide (NFSI) in dry toluene) at r.t.under an argon atmosphere.After 2 h under these conditions, the target iminolactone 14 (12 Scheme 8. Mechanism proposed for the synthesis of 1,2-ditosyl imidazolidin-2-one 12. Moreover, in 2019, Hashimoto and co-workers [32] described the synthesis of diselenide M, as well as its application as a chiral selenium π-acid catalyst in the iminolactonisation of N-methoxy β,γ-unsaturated amide 13, with high enantioselectivity induced by chiral diorganyl diselenide M (Scheme 9).In this approach, β,γ-unsaturated amide 13 is reacted in the presence of 5 mol% of diselenide M as a catalyst (3 equiv. of CaCO 3 , 1.05 equiv. of N-fluorobenzenesulfonimide (NFSI) in dry toluene) at r.t.under an argon atmosphere.After 2 h under these conditions, the target iminolactone 14 (12 compounds) was obtained in yields ranging from low to excellent (21-81%) and an enantiomeric excess (e.e.) ranging from 51% to 98%.In general, the protocol tolerated a broad range of starting materials 13, containing alkyl and aryl substituents in the β position of β,γ-unsaturated amide 13, as well as some products replaced with phthalimide (Phth) and triisopropyl silane (TIPS) groups.Additionally, methyl ester portions were obtained, which are of great importance since they are functionalisable compounds and can be used as building blocks for future reactions.Still, the tailored catalyst gave a high enantioselectivity for the products synthesised (generally above 90% for e.e.), except for the compounds 14l and 14k (51% and 81% e.e., respectively) (Scheme 9).
Molecules 2023, 28, x FOR PEER REVIEW 8 of 55 compounds) was obtained in yields ranging from low to excellent (21-81%) and an enantiomeric excess (e.e.) ranging from 51% to 98%.In general, the protocol tolerated a broad range of starting materials 13, containing alkyl and aryl substituents in the β position of β,γ-unsaturated amide 13, as well as some products replaced with phthalimide (Phth) and triisopropyl silane (TIPS) groups.Additionally, methyl ester portions were obtained, which are of great importance since they are functionalisable compounds and can be used as building blocks for future reactions.Still, the tailored catalyst gave a high enantioselectivity for the products synthesised (generally above 90% for e.e.), except for the compounds 14l and 14k (51% and 81% e.e., respectively) (Scheme 9).
In 2021, Liu and co-workers [33] reported the use of diselenides, Selectfluor ® , and visible light as a catalytic system to synthesise oxazole acetal 16 from a one-pot reaction of N-propargylamide 4 with alcohol 15.In this approach, besides the catalytic amount of diselenides and Selectfluor ® , blue LEDs were also used to catalyse the aerobic oxidation, using air as the terminal oxidant and promoting the cyclisation step, followed by aromatisation, and finally leading to the acetalisation of product 16, forming three new carbon-oxygen bonds (Scheme 10).Scheme 9. Synthesis of iminolactone 14 [32].
In 2021, Liu and co-workers [33] reported the use of diselenides, Selectfluor ® , and visible light as a catalytic system to synthesise oxazole acetal 16 from a one-pot reaction of N-propargylamide 4 with alcohol 15.In this approach, besides the catalytic amount of dise-lenides and Selectfluor ® , blue LEDs were also used to catalyse the aerobic oxidation, using air as the terminal oxidant and promoting the cyclisation step, followed by aromatisation, and finally leading to the acetalisation of product 16, forming three new carbon-oxygen bonds (Scheme 10).Scheme 9. Synthesis of iminolactone 14 [32].
In 2021, Liu and co-workers [33] reported the use of diselenides, Selectfluor ® , and visible light as a catalytic system to synthesise oxazole acetal 16 from a one-pot reaction of N-propargylamide 4 with alcohol 15.In this approach, besides the catalytic amount of diselenides and Selectfluor ® , blue LEDs were also used to catalyse the aerobic oxidation, using air as the terminal oxidant and promoting the cyclisation step, followed by aromatisation, and finally leading to the acetalisation of product 16, forming three new carbon-oxygen bonds (Scheme 10).Scheme 10.Catalyst evaluation for the synthesis of oxazole acetal 16a [33].
After the best reaction conditions were established, the authors investigated different N-propargylamides, 4, substituted with aryl (containing electron-withdrawing groups (EWGs) and electron-donating groups (EDGs)), naphthyl (1-or 2-substituted), and heteroaryl (Py, Fu, and Th) groups bonded to the amide portion to give the desired product 16 (27 products) in yields ranging from 26% to 78%.Afterwards, alcohol 15 was also evaluated, changing methanol to EtOH (16p, 65%), n PrOH (16q, 67%), i PrOH (16u, 32%), n BuOH (16r, 64%), n HexOH (16s, 65%), and n OctOH (16t, 67%); the yields of products of 16 were slightly lower in most cases.The method was extended to N-(but-3-yn-2-yl)benzamide, which gave the target product 16aa in a moderate yield of 56% (Scheme 11).In addition to the wide range of synthesised compounds, the method shows the advantage of not using a photocatalyst and utilising a smaller amount of Selectfluor ® compared to the work described earlier in this review.
Mechanistic studies were performed, such as carrying out the reaction in the dark and under anaerobic conditions (Ar atmosphere), as well as in the presence of radical scavengers 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO) and 2,6-ditertbutyl-4-methylphenol (BHT).All cases showed a marked decrease in the yield, suggesting a radical pathway as well as stressing the importance of oxygen.Controlled experiments using vinyl selenium species III were also performed.This possible intermediate III was reacted under standard conditions, affording a good yield of the target product 16 (70%); still, intermediate III can be transformed into oxazole aldehyde 5 (another possible intermediate).
After some mechanistic studies and based on previous reports in the literature, a plausible mechanism was described by the authors.The first step is the formation of Se-electrophile species I through the reaction of diselenides A with Selectfluor ® .The intermediate reacts with N-propargylamide 4 to perform the electrophile cyclisation (II) to obtain intermediate III.The visible light acts on intermediate III in a homolytic cleavage C-Se bond, forming the PhSe and vinyl radical species IV and V, respectively.Afterwards, the peroxy-radical species VI is formed through the capture of O 2 by the vinyl radical V.The VI previously formed suffers a 1,5-hydrogen migration, yielding intermediate VII, which reacts with PhSe radical species IV to form oxazole aldehyde 5 and benzene selenium acid VIII (which regenerate Se-electrophile species I after treatment with HF or HBF 4 ) (Scheme 12).
Mechanistic studies were performed, such as carrying out the reaction in the dark and under anaerobic conditions (Ar atmosphere), as well as in the presence of radical scavengers 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO) and 2,6-ditertbutyl-4methylphenol (BHT).All cases showed a marked decrease in the yield, suggesting a radical pathway as well as stressing the importance of oxygen.Controlled experiments using vinyl selenium species III were also performed.This possible intermediate III was reacted under standard conditions, affording a good yield of the target product 16 (70%); still, intermediate III can be transformed into oxazole aldehyde 5 (another possible intermediate).
After some mechanistic studies and based on previous reports in the literature, a plausible mechanism was described by the authors.The first step is the formation of Seelectrophile species I through the reaction of diselenides A with Selectfluor ® .The intermediate reacts with N-propargylamide 4 to perform the electrophile cyclisation (II) to obtain intermediate III.The visible light acts on intermediate III in a homolytic cleavage C-Se bond, forming the PhSe and vinyl radical species IV and V, respectively.Afterwards, the peroxy-radical species VI is formed through the capture of O2 by the vinyl radical V. Scheme 11.Synthesis of oxazole acetals 16 [33].The amination of alkenes using N-tosyl urea as the nucleophile was previously Scheme 12. Mechanism proposed for the synthesis of oxazole acetal 16.
In parallel, Se-electrophile species I can act as a Lewis acid (Se•••O interaction), activating the carbonyl group of oxazole aldehyde 5 to perform an acetalisation reaction with alcohol 15 to form hemiacetal X. Hemiacetal X reacts with another Se-electrophile species, I, to form the intermediate XI, which, in the presence of alcohol 15, gives the desired product, 16 (ketal), and regenerates Se-electrophile species I to a new catalytic cycle (Scheme 12).
The amination of alkenes using N-tosyl urea as the nucleophile was previously described by Denmark (Section 2.1) [31].In 2021, advances using N-tosyl amides as nucleophiles were reported by the same research group [34], in which chiral diselenide catalyst L was used to promote the chemo-, regio-, diastereo-, and enantioselective 1,2-oxyamination of alkene 11.Initially, the influence of 10 mol% of diaryl diselenide A or L was evaluated in the reaction of 3-methoxy-N-tosyl benzamide 17a with (E)-prop-1-en-1-ylbenzene 11b using 1.3 equiv. of [TMPyF][BF 4 ] and 2.5 equiv. of NaF in 1,2-dichloroethane (DCE) at r.t. for 24 h.Diphenyl diselenide A produced target product 18a at only 37%, and when the chiral diselenide L was used, the desired compound, 18a, was obtained at a good yield (71%) and excellent e.r.(93:7) (Scheme 13).Subsequently, the influence of different chiral diselenides (L, K, P, and Q) was determined by the reaction of 2-methyl-N-tosyl benzamide 17b with (E)-prop-1-en-1ylbenzene 11b under the same conditions described above.The change in substituent in the chiral selenium catalyst from 2-naphthoate ester L to the benzoate ester K derivative did not show a significant decrease in the e.r.; however, the yield of target product 18b was lower.Similar results were obtained when the selenium catalyst was substituted with alkyl esters, such as t butanoyl P or 2-adamantoyl Q.Therefore, the chiral diselenide containing the 2-naphthoate ester L substituent was chosen as the best catalyst (Scheme 13).
The protocol was efficient for a wide range of starting materials: amide 17 substituted by aryl and naphthyl groups, and aryl-alkene 11 substituted by aryl and alkyl (Scheme 14).This variety of starting materials afforded target product 18 (32 compounds) at yields ranging from low to excellent (9-93%).Alkene 11, containing alkyl-alkyl substituents, gave a poor yield of target compound 18l (9%); this result is probably due to the low stabilisation of the partial positive charge (δ+) of the selenium intermediate, as shown in Scheme 15.Chiral diselenide L showed good efficiency once the synthesised compounds, 18, were obtained with an e.r.ranging from good to excellent (86:14/98:02), with only one Subsequently, the influence of different chiral diselenides (L, K, P, and Q) was determined by the reaction of 2-methyl-N-tosyl benzamide 17b with (E)-prop-1-en-1-ylbenzene 11b under the same conditions described above.The change in substituent in the chiral selenium catalyst from 2-naphthoate ester L to the benzoate ester K derivative did not show a significant decrease in the e.r.; however, the yield of target product 18b was lower.Similar results were obtained when the selenium catalyst was substituted with alkyl esters, such as t butanoyl P or 2-adamantoyl Q.Therefore, the chiral diselenide containing the 2-naphthoate ester L substituent was chosen as the best catalyst (Scheme 13).
The protocol was efficient for a wide range of starting materials: amide 17 substituted by aryl and naphthyl groups, and aryl-alkene 11 substituted by aryl and alkyl (Scheme 14).This variety of starting materials afforded target product 18 (32 compounds) at yields ranging from low to excellent (9-93%).Alkene 11, containing alkyl-alkyl substituents, gave a poor yield of target compound 18l (9%); this result is probably due to the low stabilisation of the partial positive charge (δ+) of the selenium intermediate, as shown in Scheme 15.Chiral diselenide L showed good efficiency once the synthesised compounds, 18, were obtained with an e.r.ranging from good to excellent (86:14/98:02), with only one diastereoisomer.Despite the large amount of NaF utilised, the Denmark method presented a wide variety of products with a high e.r. and with high tolerance to different functional groups.The regio-, diastereo-and enantioselectivity could be explained by substituents in the starting materials, and for this, understanding which carbon is more reactive in the intermediate (seleniranium) is necessary, as well as which amide atom is more nucleophilic (N or O).The oxyamination could form two possible constitutional isomers, once the seleniranium ion intermediate has two electrophilic sites I or II, however due to its electronic character the reaction goes preferentially in only one direction.When the alkenes substituted with aryl and alkyl groups are used, the partial positive charge is stabilised by aryl group II (more electrophilic site) instead of alkyl one I.This possibility can be observed when the unsymmetrical alkene, 1-methoxy-4-(4-(trifluoromethyl)styryl)benzene (starting material of product 18s), was used, which contained OMe and CF3 groups bonded on the aromatic ring.In these cases, the nucleophilic addition occurs in the carbon attached to the aromatic ring containing the methoxy group.The electron donating effect better stabilises the positive charge than 4trifluoromethyl group.
Afterwards, the preference of nucleophiles (oxygen IV and nitrogen III) sites was also proposed, whereby the tosyl group (EWG) bonded to the N-tosyl amides, decrease the propensity for delocalization of the nonbonding electron pair from nitrogen for resonance to the carbonyl group (Scheme 15).Still, the 2,4,6-collidine formed in situ can deprotonate the N-H bond due the low pKa of this hydrogen.Due these properties, the nitrogen atom of amide is the first nucleophilic III in the site capable of supporting the positive charge in the seleniranium ion intermediate II.Both steps, seleniranium ion formation and selenium elimination, are important for the stereoselectivity of this method.Seleniranium ion is formed through a syn reaction in a concerted mechanism, which can be further attacked by a nucleophile in an anti-fashion reaction.Similarly, the attack of the oxygen atom of the carbonyl group promotes the displacement of Se(IV) intermediate III, which goes through an SN2-type reaction, attacking the selenium on the opposite site.Based on this proposal, the use of E alkene gave the target product in a trans relationship while giving Z alkene in the cis relationship The regio-, diastereo-and enantioselectivity could be explained by substituents in the starting materials, and for this, understanding which carbon is more reactive in the intermediate (seleniranium) is necessary, as well as which amide atom is more nucleophilic (N or O).The oxyamination could form two possible constitutional isomers, once the seleniranium ion intermediate has two electrophilic sites I or II, however due to its electronic character the reaction goes preferentially in only one direction.When the alkenes substituted with aryl and alkyl groups are used, the partial positive charge is stabilised by aryl group II (more electrophilic site) instead of alkyl one I.This possibility can be observed when the unsymmetrical alkene, 1-methoxy-4-(4-(trifluoromethyl)styryl)benzene (starting material of product 18s), was used, which contained OMe and CF 3 groups bonded on the aromatic ring.In these cases, the nucleophilic addition occurs in the carbon attached to the aromatic ring containing the methoxy group.The electron donating effect better stabilises the positive charge than 4-trifluoromethyl group.
Afterwards, the preference of nucleophiles (oxygen IV and nitrogen III) sites was also proposed, whereby the tosyl group (EWG) bonded to the N-tosyl amides, decrease the propensity for delocalization of the nonbonding electron pair from nitrogen for resonance to the carbonyl group (Scheme 15).Still, the 2,4,6-collidine formed in situ can deprotonate the N-H bond due the low pK a of this hydrogen.Due these properties, the nitrogen atom of amide is the first nucleophilic III in the site capable of supporting the positive charge in the seleniranium ion intermediate II.
Both steps, seleniranium ion formation and selenium elimination, are important for the stereoselectivity of this method.Seleniranium ion is formed through a syn reaction in a concerted mechanism, which can be further attacked by a nucleophile in an anti-fashion reaction.Similarly, the attack of the oxygen atom of the carbonyl group promotes the displacement of Se(IV) intermediate III, which goes through an S N 2-type reaction, attacking the selenium on the opposite site.Based on this proposal, the use of E alkene gave the target product in a trans relationship while giving Z alkene in the cis relationship (Scheme 15).
The use of diorganyl diselenide as a catalyst was efficiently applied to the synthesis of 2,1-benzoxazole 20 from the reaction of o-nitrophenylacetylene 19 under electrochemical conditions by Pan and his research group in 2021 (Scheme 16) [35].In this approach, diphenyl diselenide A activates the alkyne to suffer a nucleophilic attack by the nitro group of the starting material, 19, which is different from traditional methods that reduce the nitro group to nitroso and then carry out the nucleophilic attack (Scheme 17).Both steps, seleniranium ion formation and selenium elimination, are important for the stereoselectivity of this method.Seleniranium ion is formed through a syn reaction in a concerted mechanism, which can be further attacked by a nucleophile in an anti-fashion reaction.Similarly, the attack of the oxygen atom of the carbonyl group promotes the displacement of Se(IV) intermediate III, which goes through an SN2-type reaction, attacking the selenium on the opposite site.Based on this proposal, the use of E alkene gave the target product in a trans relationship while giving Z alkene in the cis relationship (Scheme 15).
The use of diorganyl diselenide as a catalyst was efficiently applied to the synthesis of 2,1-benzoxazole 20 from the reaction of o-nitrophenylacetylene 19 under electrochemical conditions by Pan and his research group in 2021 (Scheme 16) [35].In this approach, diphenyl diselenide A activates the alkyne to suffer a nucleophilic attack by the nitro group of the starting material, 19, which is different from traditional methods that reduce the nitro group to nitroso and then carry out the nucleophilic attack (Scheme 17).In this nucleophilic cyclisation, o-nitrophenylacetylene 19 was reacted in the presence of 10 mol% of diphenyl diselenide A as the catalyst and 0.5 equiv. of Et4NPF6 as the electrolyte in CH3CN as the solvent at r.t. in an undivided cell containing a graphite rod cathode (Φ 6 mm) and a Pt plate anode (1 cm × 1 cm), with constant potential = 1.6 V vs. Ag/AgCl.When using this system, a wide range of 23 2,1-benzoxazole 20 products were synthesised in yields ranging from moderate to good (33-89%).The protocol was sensitive to the electronic effects of the substituents located on the aromatic ring bonded in the R 1 position.The presence of EWGs (such as 4-CF3 and 4-CN) at this aromatic ring (R 1 ) position gave the desired product, 20g and 20i, in moderate yields (51% and 56%, respectively) over a longer reaction time (1.6 h) when compared to the starting material substituted with EDGs (such as 4-Me and 4-OMe), which gave the target products, 20b and 20c, in better yields and over a shorter reaction time (74%, 0.7 h and 77%, 0.4 h, respectively).The protocol was efficiently extended to the alkyl, 2-naphthyl (20l), 2thienyl (20m), and ferrocenyl (20x) groups, as well as o-nitropyridylacetylene (20y) (Scheme 16).
The proposed mechanism for electrochemical cyclisation starts with the reaction of diphenyl diselenide A in the anode to form intermediate selenium cation II and phenyl selenium radical III (which can also form another equivalent of selenium cation II by single electron transfer (SET) on the anode).Selenium cation intermediate II reacts with alkyne 19 to form the selenonium intermediate IV, which is attacked by oxygen on the nitro group in an intramolecular nucleophilic cyclisation (forming the cyclic intermediate V).Subsequently, intermediate VI is formed after the cleavage of the N−O bond, giving tertiary carbocation VI, which is attacked by oxygen to afford intermediate VII.Finally, after the release of the selenium cation II species, the desired product is formed: 20 (Scheme 17).
In 2022, Ruan and co-workers [36] applied electrochemistry to perform the intramolecular cyclisation of 2-vinylanilide 21 using diphenyl diselenide A as a catalyst to synthesise indole 22.This selenium catalyst protocol has an advantage over indole synthesis 22 since this sustainable method supports several 2-vinylanilide 21, containing highly functional, sensitive groups and bioactive compounds (natural molecules, drugs, peptides, and amino acid).Firstly, diaryl diselenides A, N, and R-V were screened using 2-vinylanilide 21a as starting material.When dibenzyl V or ortho-substituted (methyl T or ethyl U) diaryl diselenides were evaluated, only traces of target indole 22a were obtained.When the meta-substituted (Cl R or CF3 S) diaryl diselenides were tested, target compound 22a was obtained at a poor yield (16% and 17%, respectively).The best yields were obtained when 1,2-bis(4-chlorophenyl) diselenide N and diphenyl diselenide A were In this nucleophilic cyclisation, o-nitrophenylacetylene 19 was reacted in the presence of 10 mol% of diphenyl diselenide A as the catalyst and 0.5 equiv. of Et 4 NPF 6 as the electrolyte in CH 3 CN as the solvent at r.t. in an undivided cell containing a graphite rod cathode (Φ 6 mm) and a Pt plate anode (1 cm × 1 cm), with constant potential = 1.6 V vs. Ag/AgCl.When using this system, a wide range of 23 2,1-benzoxazole 20 products were synthesised in yields ranging from moderate to good (33-89%).The protocol was sensitive to the electronic effects of the substituents located on the aromatic ring bonded in the R 1 position.The presence of EWGs (such as 4-CF 3 and 4-CN) at this aromatic ring (R 1 ) position gave the desired product, 20g and 20i, in moderate yields (51% and 56%, respectively) over a longer reaction time (1.6 h) when compared to the starting material substituted with EDGs (such as 4-Me and 4-OMe), which gave the target products, 20b and 20c, in better yields and over a shorter reaction time (74%, 0.7 h and 77%, 0.4 h, respectively).The protocol was efficiently extended to the alkyl, 2-naphthyl (20l), 2-thienyl (20m), and ferrocenyl (20x) groups, as well as o-nitropyridylacetylene (20y) (Scheme 16).
The proposed mechanism for electrochemical cyclisation starts with the reaction of diphenyl diselenide A in the anode to form intermediate selenium cation II and phenyl selenium radical III (which can also form another equivalent of selenium cation II by single electron transfer (SET) on the anode).Selenium cation intermediate II reacts with alkyne 19 to form the selenonium intermediate IV, which is attacked by oxygen on the nitro group in an intramolecular nucleophilic cyclisation (forming the cyclic intermediate V).Subsequently, intermediate VI is formed after the cleavage of the N−O bond, giving tertiary carbocation VI, which is attacked by oxygen to afford intermediate VII.Finally, after the release of the selenium cation II species, the desired product is formed: 20 (Scheme 17).
Under this organic redox catalysis method, 47 highly functionalised indoles 22 were obtained at yields ranging from moderate to excellent (12-96%).The protocol was not sensitive to several substituents, such as chlorine, bromo, cyan, pyridyl, pinacol ester, and carboxyl groups, and also tolerated starting materials, 21, containing active hydrogens such as sulfonamide, free carboxylic acid, and amide, as well as heterocyclic moieties (thiazole or pyrazine).An unsatisfactory result was obtained when the methyl group (R 1 ) bonded to the vinyl substrate 21 was changed to phenyl, and in this case, 3-phenyl indole 22r was obtained at only a 12% yield (Scheme 19).
The indoles containing menthol 22v or epiandrosterone 22w natural substituents were obtained at moderate yields (68% and 52%, respectively).Similar results were obtained when the starting materials containing drug derivatives were reacted under standard conditions; in these cases, the indoles containing trelagliptin (a drug for type 2 diabetes) portion 22x and lenalidomide (a drug for multiple myeloma) moieties 22y were Scheme 18. Catalyst evaluation for the synthesis of compounds 22a [36].
Under this organic redox catalysis method, 47 highly functionalised indoles 22 were obtained at yields ranging from moderate to excellent (12-96%).The protocol was not sensitive to several substituents, such as chlorine, bromo, cyan, pyridyl, pinacol ester, and carboxyl groups, and also tolerated starting materials, 21, containing active hydrogens such as sulfonamide, free carboxylic acid, and amide, as well as heterocyclic moieties (thiazole or pyrazine).An unsatisfactory result was obtained when the methyl group (R 1 ) bonded to the vinyl substrate 21 was changed to phenyl, and in this case, 3-phenyl indole 22r was obtained at only a 12% yield (Scheme 19).
Under this organic redox catalysis method, 47 highly functionalised indoles 22 were obtained at yields ranging from moderate to excellent (12-96%).The protocol was not sensitive to several substituents, such as chlorine, bromo, cyan, pyridyl, pinacol ester, and carboxyl groups, and also tolerated starting materials, 21, containing active hydrogens such as sulfonamide, free carboxylic acid, and amide, as well as heterocyclic moieties (thiazole or pyrazine).An unsatisfactory result was obtained when the methyl group (R 1 ) bonded to the vinyl substrate 21 was changed to phenyl, and in this case, 3-phenyl indole 22r was obtained at only a 12% yield (Scheme 19).
The indoles containing menthol 22v or epiandrosterone 22w natural substituents were obtained at moderate yields (68% and 52%, respectively).Similar results were obtained when the starting materials containing drug derivatives were reacted under standard conditions; in these cases, the indoles containing trelagliptin (a drug for type 2 diabetes) portion 22x and lenalidomide (a drug for multiple myeloma) moieties 22y were Scheme 19.Synthesis of indole 22 [36].
The indoles containing menthol 22v or epiandrosterone 22w natural substituents were obtained at moderate yields (68% and 52%, respectively).Similar results were obtained when the starting materials containing drug derivatives were reacted under standard conditions; in these cases, the indoles containing trelagliptin (a drug for type 2 diabetes) portion 22x and lenalidomide (a drug for multiple myeloma) moieties 22y were obtained at 70% and 60%, respectively.Still, the method was applied to amino acids and peptides, obtaining target products 22z-ad without racemisation.The method was efficient with several starting materials containing serine, tyrosine, and histidine derivatives, as well as dipeptide, tripeptide, and tetrapeptide, which afforded the highly functionalised indole 22z-ag (8 products) at yields ranging from moderate to good (51-85%) (Scheme 20).
obtained at 70% and 60%, respectively.Still, the method was applied to amino acids and peptides, obtaining target products 22z-ad without racemisation.The method was efficient with several starting materials containing serine, tyrosine, and histidine derivatives, as well as dipeptide, tripeptide, and tetrapeptide, which afforded the highly functionalised indole 22z-ag (8 products) at yields ranging from moderate to good (51-85%) (Scheme 20).Scheme 20.Synthesis of indole 22 containing natural molecules and drug derivatives [36].
The mechanism proposed by the authors starts with the formation of selenium cation II and radical III intermediates via a reaction of diphenyl diselenide A with the anode.Afterwards, cation intermediate II reacts with the alkene 21 portion to form seleniranium cation IV, which can be attacked by nitrogen atoms to obtain cyclic intermediate V.This intermediate V has two routes to form the indole of interest, 22; the first one occurs after deprotonation and the selenium (selenophenol VII) elimination step; in the second route, intermediate V reacts with another selenium cation II to give intermediate VI, which produces the desired indole, 22, and regenerates selenium catalyst A to a new cycle after the elimination step.In this protocol, it was not necessary to use sacrificial chemical oxidants, since the protons previously eliminated in the aromatisation step undergo cathodic reduction to generate H2.Still, the selenophenol VII formed can be oxidised to selenium radical III in the anode, and selenium radical III is easily dimerised to induce the catalyst diphenyl diselenide A to begin a new catalytic cycle (Scheme 21).
The mechanism proposed by the authors starts with the formation of selenium cation II and radical III intermediates via a reaction of diphenyl diselenide A with the anode.Afterwards, cation intermediate II reacts with the alkene 21 portion to form seleniranium cation IV, which can be attacked by nitrogen atoms to obtain cyclic intermediate V.This intermediate V has two routes to form the indole of interest, 22; the first one occurs after deprotonation and the selenium (selenophenol VII) elimination step; in the second route, intermediate V reacts with another selenium cation II to give intermediate VI, which produces the desired indole, 22, and regenerates selenium catalyst A to a new cycle after the elimination step.In this protocol, it was not necessary to use sacrificial chemical oxidants, since the protons previously eliminated in the aromatisation step undergo cathodic reduction to generate H 2 .Still, the selenophenol VII formed can be oxidised to selenium radical III in the anode, and selenium radical III is easily dimerised to induce the catalyst diphenyl diselenide A to begin a new catalytic cycle (Scheme 21).
In 2022, Ren and co-workers described [37] the use of electrochemistry as a sustainable alternative for the synthesis of polysubstituted oxazole 3 by the N,O-difunctionalisation of ynamide 1 using diphenyl diselenide A as a catalyst.A green, efficient, and high atom economy method was reported, in which several ynamides, 1, were reacted in the presence of 10 mol% of diphenyl diselenide A as a catalyst, 1.5 equiv. of n Bu 4 NBF 4 , and organyl nitrile 2 as the solvent in nitrogen at r.t. for 80 min in an undivided cell composed of a carbon graphite cloth (10 mm × 10 mm) cathode and a carbon graphite cloth (10 mm × 10 mm) anode at a constant current of 10 mA.The principal advantage of the optimised method is that it does not require an external chemical oxidant (Scheme 22).In 2022, Ren and co-workers described [37] the use of electrochemistry as a sustainable alternative for the synthesis of polysubstituted oxazole 3 by the N,Odifunctionalisation of ynamide 1 using diphenyl diselenide A as a catalyst.A green, efficient, and high atom economy method was reported, in which several ynamides, 1, were reacted in the presence of 10 mol% of diphenyl diselenide A as a catalyst, 1.5 equiv. of n Bu4NBF4, and organyl nitrile 2 as the solvent in nitrogen at r.t. for 80 min in an undivided cell composed of a carbon graphite cloth (10 mm × 10 mm) cathode and a carbon graphite cloth (10 mm × 10 mm) anode at a constant current of 10 mA.The principal advantage of the optimised method is that it does not require an external chemical oxidant (Scheme 22).Scheme 22. Synthesis of oxazole 3 [37].
Under these conditions, several N-protected as well as aryl/alkyl alkynyl-substituted ynamides, 1, were reacted, giving a wide range of target oxazoles, 3 (41 compounds), at In 2022, Ren and co-workers described [37] the use of electrochemistry as a sustainable alternative for the synthesis of polysubstituted oxazole 3 by the N,Odifunctionalisation of ynamide 1 using diphenyl diselenide A as a catalyst.A green, efficient, and high atom economy method was reported, in which several ynamides, 1, were reacted in the presence of 10 mol% of diphenyl diselenide A as a catalyst, 1.5 equiv. of n Bu4NBF4, and organyl nitrile 2 as the solvent in nitrogen at r.t. for 80 min in an undivided cell composed of a carbon graphite cloth (10 mm × 10 mm) cathode and a carbon graphite cloth (10 mm × 10 mm) anode at a constant current of 10 mA.The principal advantage of the optimised method is that it does not require an external chemical oxidant (Scheme 22).Scheme 22. Synthesis of oxazole 3 [37].
Under these conditions, several N-protected as well as aryl/alkyl alkynyl-substituted ynamides, 1, were reacted, giving a wide range of target oxazoles, 3 (41 compounds), at yields ranging from low to good (30-82%).Oxazole 3 substituted with ibuprofen and estrone derivatives 3aj and 3ak was synthesised using standard conditions with yields of 64% and 80%, respectively.The protocol was extended to nitrile 2 substituted with alkyl (Me, n Pr, CD 3 , n Bu, i Pr, c Pr, c Pent, and CH 2 Cl) and styryl groups (compounds 3x-ad); however, in these cases, it was necessary to increase diphenyl diselenide catalyst A from 10 mol% to 20 mol%, and the reaction was performed at 40 estrone derivatives 3aj and 3ak was synthesised using standard conditions with yields of 64% and 80%, respectively.The protocol was extended to nitrile 2 substituted with alkyl (Me, n Pr, CD3, n Bu, i Pr, c Pr, c Pent, and CH2Cl) and styryl groups (compounds 3x-ad); however, in these cases, it was necessary to increase diphenyl diselenide catalyst A from 10 mol% to 20 mol%, and the reaction was performed at 40  More recently, in 2023, Breder and his research group [38] described the advances in the use of photo-aerobic selenium-π-acid multicatalysis in the synthesis of cyclic carbonate 24.The method was developed through the reaction of non-activated homoallylic carbonate ester 23 under ambient air as the terminal oxidant, using visible light as an energy source (Scheme 24).In this approach, pyrylium dye and diphenyl diselenide A were used for the activation of the C=C double bond of the homoallylic carbonic acid esters, allowing for the intramolecular attack of nonprotic nucleophiles.In this regard, the authors reported that the reaction using carbonate substituted with pmethoxybenzyl (PMB) was better when compared to the t Bu group for the increase in nucleophilicity of the oxygen atom of carbonate.Moreover, the selenium catalysts were tested, such as diphenyl diselenide A, (4-MeOC6H4Se)2 W, and (2,6-(MeO)2C6H3Se)2 X, and the best result was obtained when diphenyl diselenide A was used (Scheme 24).Scheme 23.Mechanism proposed for the synthesis of oxazole 3.
More recently, in 2023, Breder and his research group [38] described the advances in the use of photo-aerobic selenium-π-acid multicatalysis in the synthesis of cyclic carbonate 24.The method was developed through the reaction of non-activated homoallylic carbonate ester 23 under ambient air as the terminal oxidant, using visible light as an energy source (Scheme 24).In this approach, pyrylium dye and diphenyl diselenide A were used for the activation of the C=C double bond of the homoallylic carbonic acid esters, allowing for the intramolecular attack of nonprotic nucleophiles.In this regard, the authors reported that the reaction using carbonate substituted with p-methoxybenzyl (PMB) was better when compared to the t Bu group for the increase in nucleophilicity of the oxygen atom of carbonate.Moreover, the selenium catalysts were tested, such as diphenyl diselenide A, (4-MeOC 6 H 4 Se) 2 W, and (2,6-(MeO) 2 C 6 H 3 Se) 2 X, and the best result was obtained when diphenyl diselenide A was used (Scheme 24).
Under this approach, a wide range of 4-mono-and 4,6-disubstituted 1,3-dioxan-2-one 24 (25 products) were synthesised at yields ranging from low to good (<4-74%) with a diastereomeric ratio (d.r.) of 3.6:1-1.9:1.These target compounds were obtained via the intramolecular reaction of carbonate 23 in the presence of 5 mol% of diphenyl diselenide A as a catalyst, 5 mol% of TAPT, 1 equiv. of PhSiH 3 , and MeCN as the solvent with 465 nm irradiation under an air atmosphere at 55 • C using 4Å molecular sieves (MS) and a reaction time of 24 h to 70 h.The new protocol, as described by Breder, tolerated several starting materials, 23, substituted with alkyl and aryl, and when 4,6-disubstituted dioxanone 24 was obtained, the cis-diastereoselectivity was preferable.In all cases, a mixture of enantiomers was obtained; however, the authors did not use catalysts containing a chiral moiety, which could induce an enantiomer excess (Scheme 24).Scheme 24.Synthesis and catalyst evaluation for the obtention of cyclic carbonate 24 [38].
Under this approach, a wide range of 4-mono-and 4,6-disubstituted 1,3-dioxan-2one 24 (25 products) were synthesised at yields ranging from low to good (<4-74%) with a diastereomeric ratio (d.r.) of 3.6:1-1.9:1.These target compounds were obtained via the intramolecular reaction of carbonate 23 in the presence of 5 mol% of diphenyl diselenide A as a catalyst, 5 mol% of TAPT, 1 equiv. of PhSiH3, and MeCN as the solvent with 465 nm irradiation under an air atmosphere at 55 °C using 4Å molecular sieves (MS) and a reaction time of 24 h to 70 h.The new protocol, as described by Breder, tolerated several starting materials, 23, substituted with alkyl and aryl, and when 4,6-disubstituted dioxanone 24 was obtained, the cis-diastereoselectivity was preferable.In all cases, a mixture of enantiomers was obtained; however, the authors did not use catalysts containing a chiral moiety, which could induce an enantiomer excess (Scheme 24).
The authors propose stereoselectivity for the reaction based on the transition state (TS) geometries, TS I and TS II, as demonstrated in Scheme 25.For TS II, where the carbonate terminal substituent is preferentially in a pseudo-equatorial orientation, there is a greater 1,3-diaxial interaction (Scheme 25).This 1,3-diaxial interaction did not occur for TS I.This selectivity increases with the increasing steric hindrance of the R group, as observed according to the d.r. of the synthesised 24p (R = Me, d.r.= 2.6:1) and 24w (R = Bn, d.r.= 2.6:1) compounds, which were formed under a minor d.r.since they are less sterically hindered than the 24x (R = Ph, d.r.= 3.2:1) and 24y (R = i Pr, d.r.= 3.4:1) (Scheme 24).Scheme 24.Synthesis and catalyst evaluation for the obtention of cyclic carbonate 24 [38].
The authors propose stereoselectivity for the reaction based on the transition state (TS) geometries, TS I and TS II, as demonstrated in Scheme 25.For TS II, where the carbonate terminal substituent is preferentially in a pseudo-equatorial orientation, there is a greater 1,3-diaxial interaction (Scheme 25).This 1,3-diaxial interaction did not occur for TS I.This selectivity increases with the increasing steric hindrance of the R group, as observed according to the d.r. of the synthesised 24p (R = Me, d.r.= 2.6:1) and 24w (R = Bn, d.r.= 2.6:1) compounds, which were formed under a minor d.r.since they are less sterically hindered than the 24x (R = Ph, d.r.= 3.2:1) and 24y (R = i Pr, d.r.= 3.4:1) (Scheme 24).Recently (2023), Sarkar and co-workers [39] described the synthesis of carbonylpyrroles 26 or 27 or -oxazole 5 using diphenyl diselenide A as an electrocatalyst, which activates the alkyne portion of the N-propargyl derivatives (enamines 25 or amides 4).Recently (2023), Sarkar and co-workers [39] described the synthesis of carbonylpyrroles 26 or 27 or -oxazole 5 using diphenyl diselenide A as an electrocatalyst, which activates the alkyne portion of the N-propargyl derivatives (enamines 25 or amides 4).This is a sustainable redox process that promotes an intramolecular electro-oxidative addition reaction activated by a cationic phenyl selenium species (Scheme 26).Scheme 25.Selectivity in the synthesis of cyclic carbonate 24.
Recently (2023), Sarkar and co-workers [39] described the synthesis of carbonylpyrroles 26 or 27 or -oxazole 5 using diphenyl diselenide A as an electrocatalyst, which activates the alkyne portion of the N-propargyl derivatives (enamines 25 or amides 4).This is a sustainable redox process that promotes an intramolecular electro-oxidative addition reaction activated by a cationic phenyl selenium species (Scheme 26).
In this method, N-propargyl enamine carboxylate 25 (alkyne substituted with aryl or Me groups) was reacted with 10 mol% of diphenyl diselenide A as a catalyst in a solvent mixture of MeCN/H 2 O (50:1) and LiClO 4 (0.1 M) as the electrolyte.Moreover, electrochemistry apparatus containing a graphite plate as the anode and a platinum sheet as the cathode in an undivided cell was used, with a constant current of 10 mA at r.t.under an air atmosphere for 2.3 h.Under these conditions, the target 4-carbonylpyrroles (keto-pyrroles) 26 were obtained (18 compounds) at yields ranging from good to excellent (72-93%) (Scheme 26).In this study, the authors did not use other diselenides to perform a reactivity comparison.
The protocol was not sensitive to starting material 25 containing EWGs or EDGs attached at different positions of the aryl-substituted portion in the alkyne, as well as being attached to a disubstituted aromatic ring.The less reactive alkyl-substituted alkyne or alkyl alkenyl enamine were efficiently reacted under the above conditions, giving the desired products 26r and 26q at 85% and 79% yields, respectively (Scheme 26).
When the terminal alkynes on N-propargyl enamine carboxylate 25 were used as the starting material to synthesise 4-formylpyrroles 27, the previous conditions were adapted, requiring a decrease in the amount of mixture of MeCN/H 2 O from (50:1) to (20:1), as well as an increase in the time of the reaction from 2.3 h to 2.7 h.Under these conditions, target 4-formylpyrrole 27 (12 products) was obtained at good yields (61-83%).Moreover, the protocol was used to obtain the pyrroles 27l and 27k, which were substituted with naturally occurring derivatives, such as citronellol and long-chain alcohols (Scheme 26).
The authors extended the electrochemistry method by using diselenide as the catalyst for N-propargyl amide 4 to synthesise 5-carbonyl oxazole 5, but higher temperature and longer reaction times were necessary: 60 • C and 4 h.Under these conditions, 5-carbonyl oxazole 5 was obtained (6 compounds) at yields ranging from good to excellent (74-92%).In general, 5-formyl oxazole 5 was obtained with higher yields when compared to 5-benzoyl oxazole, e.g., the 5d and 5h formyl and benzoyl derivative compounds were isolated at 91% and 74%, respectively (Scheme 27).
or alkyl alkenyl enamine were efficiently reacted under the above conditions, giving the desired products 26r and 26q at 85% and 79% yields, respectively (Scheme 26).
When the terminal alkynes on N-propargyl enamine carboxylate 25 were used as the starting material to synthesise 4-formylpyrroles 27, the previous conditions were adapted, requiring a decrease in the amount of mixture of MeCN/H2O from (50:1) to (20:1), as well as an increase in the time of the reaction from 2.3 h to 2.7 h.Under these conditions, target 4-formylpyrrole 27 (12 products) was obtained at good yields (61-83%).Moreover, the protocol was used to obtain the pyrroles 27l and 27k, which were substituted with naturally occurring derivatives, such as citronellol and long-chain alcohols (Scheme 26).
The authors extended the electrochemistry method by using diselenide as the catalyst for N-propargyl amide 4 to synthesise 5-carbonyl oxazole 5, but higher temperature and longer reaction times were necessary: 60 °C and 4 h.Under these conditions, 5-carbonyl oxazole 5 was obtained (6 compounds) at yields ranging from good to excellent (74-92%).In general, 5-formyl oxazole 5 was obtained with higher yields when compared to 5benzoyl oxazole, e.g., the 5d and 5h formyl and benzoyl derivative compounds were isolated at 91% and 74%, respectively (Scheme 27).

Addition and Oxidative Functionalisation Reactions
In this section, we describe the reactions involving the additions and oxidations for alkynes, alkenes, or heterocycles.Such reactions with diorganyl diselenide usually need an extra oxidising agent, most commonly Selectfluor ® , pyridinium triflate salts, or Scheme 28.Mechanism proposed for the synthesis of pyrrole 26.

Addition and Oxidative Functionalisation Reactions
In this section, we describe the reactions involving the additions and oxidations for alkynes, alkenes, or heterocycles.Such reactions with diorganyl diselenide usually need an extra oxidising agent, most commonly Selectfluor ® , pyridinium triflate salts, or TEMPO.The effectiveness of a catalyst is shown by its ability to react with a broad scope of oxidising agents and with different substrates.In general, similar properties of Se catalysts can be observed in the methodologies selected for this section; however, diphenyl diselenide was the most utilised in the protocols.
In 2018, Zhao and co-workers [28] described the synthesis of ynones 29 and 31 through an unusual C≡C triple bond migration using propargylphosphonate 28 and 3-alkynoate 30, with the diaryl diselenide species used as catalysts to promote the conversion of C sp3 −P to C sp −P bonds.Initially, some conditions were established, and the diorganyl diselenide (A, V, W, Y) species were evaluated by the authors, for which diethyl (3-phenyl-2-propynyl)phosphonate 28a was reacted (as the starting material) in the presence of 2.2 equiv. of 1-fluoropyridinium triflate [PyF][OTf], DCE as the solvent, and a 2.0 equiv. of H 2 O at 80 • C for 12 h in the presence of 10 mol% of different diselenides ( A, V, W, Y).When bis(dibenzyl) or bis(p-anisyl) diselenide V and W were tested, the target product, 29a, was obtained at moderate yields, 46% and 48%, respectively (Scheme 29).Despite the low yield, it is necessary to highlight that bis(dibenzyl) diselenide was able to promote the reaction, unlike the other methods (Scheme 29).Scheme 28.Mechanism proposed for the synthesis of pyrrole 26.

Addition and Oxidative Functionalisation Reactions
In this section, we describe the reactions involving the additions and oxidations fo alkynes, alkenes, or heterocycles.Such reactions with diorganyl diselenide usually need an extra oxidising agent, most commonly Selectfluor ® , pyridinium triflate salts, o TEMPO.The effectiveness of a catalyst is shown by its ability to react with a broad scop of oxidising agents and with different substrates.In general, similar properties of S catalysts can be observed in the methodologies selected for this section; however diphenyl diselenide was the most utilised in the protocols.
In 2018, Zhao and co-workers [28] described the synthesis of ynones 29 and 3 through an unusual C≡C triple bond migration using propargylphosphonate 28 and 3 alkynoate 30, with the diaryl diselenide species used as catalysts to promote th conversion of Csp3−P to Csp−P bonds.Initially, some conditions were established, and th diorganyl diselenide (A, V, W, Y) species were evaluated by the authors, for which diethy (3-phenyl-2-propynyl)phosphonate 28a was reacted (as the starting material) in th presence of 2.2 equiv. of 1-fluoropyridinium triflate [PyF][OTf], DCE as the solvent, and a 2.0 equiv. of H2O at 80 °C for 12 h in the presence of 10 mol% of different diselenides (A V, W, Y).When bis(dibenzyl) or bis(p-anisyl) diselenide V and W were tested, the targe product, 29a, was obtained at moderate yields, 46% and 48%, respectively (Scheme 29) Despite the low yield, it is necessary to highlight that bis(dibenzyl) diselenide was able t promote the reaction, unlike the other methods (Scheme 29).Scheme 29.Catalyst evaluation for the synthesis of ynone 29a [28].Scheme 29.Catalyst evaluation for the synthesis of ynone 29a [28].
The presence of neutral or EWGs at the aromatic ring of diaryl diselenide A and Y improved the yield of 29a.When 1,2-bis [4-(trifluoromethyl)phenyl]diselenide Y was used, the 29a compound was obtained at 65%, and the best catalyst for this reaction was diphenyl diselenide A, which formed target product 29a at 72%.Furthermore, the authors performed a test in the absence of a catalyst, and compound 29a was not detected, showing its importance in the reaction.
In this approach, several 3-substituted propargyl phosphonates, 28, with alkyl and aryl groups containing EWGs and EDGs in different positions of the aromatic ring, as well as alkyl substituents (Me, Et, i Pr, n Bu) in the phosphonate 28 portion, were used as the starting materials, which gave target ynone 29 (15 products) at yields ranging from moderate to good (42-74%).This protocol was efficiently extended to 3-alkynoate derivative 30, which afforded the desired ynone 31 (8 compounds) at slightly higher yields (41-86%) than propargyl phosphonate derivative 29.The method was not sensitive to both the electronic and steric effects of the substituents of starting material 28 (Scheme 30).
The mechanism proposed by the authors starts with the reaction of diphenyl diselenide A with [PyF][OTf] to promote the formation of electrophilic species PhSeX I, and subsequently, the reaction of alkyne used, the 29a compound was obtained at 65%, and the best catalyst for this reaction wa diphenyl diselenide A, which formed target product 29a at 72%.Furthermore, the author performed a test in the absence of a catalyst, and compound 29a was not detected showing its importance in the reaction.
In this approach, several 3-substituted propargyl phosphonates, 28, with alkyl and aryl groups containing EWGs and EDGs in different positions of the aromatic ring, as wel as alkyl substituents (Me, Et, i Pr, n Bu) in the phosphonate 28 portion, were used as the starting materials, which gave target ynone 29 (15 products) at yields ranging from moderate to good (42-74%).This protocol was efficiently extended to 3-alkynoate derivative 30, which afforded the desired ynone 31 (8 compounds) at slightly higher yield (41-86%) than propargyl phosphonate derivative 29.The method was not sensitive to both the electronic and steric effects of the substituents of starting material 28 (Scheme 30).Scheme 30.Synthesis of ynone 29 [28].
The previously optimised conditions, as described by Breder in 2018, were adapted for the formation of noncyclic ether 32 via the intermolecular reactions of alcohol 15 with alkene 11 [29].In this case, an increase in the loading of Se-catalyst B from 5 mol% to 10 mol% and TAPT from 3 mol% to 5 mol% were necessary.Under these conditions, the desired ether 32 (9 products) was generally obtained at moderate yields after a very long reaction time (many days, 1-12 d).It is possible that these results are due to the long time of the reactions, which may have caused a significant loss of olefinic starting material 11 (Scheme 32).
The mechanism for the oxidative functionalisation of alkenes occurs in a similar way.Initially, selenium electrophilic species I reacts with alkene 11 to form seleniranium intermediate II.Intermediate II suffers from a nucleophilic attack to give compound III by a ring opening in an anti-specific manner.Afterwards, the anti β-elimination of IV occurs under oxidative conditions, recycling electrophilic selenium species I for a new cycle, and the target 32 derivative compound is formed from allylic functionalisation (Scheme 33).Scheme 31.Mechanism proposed for the synthesis of ynone 29.
The previously optimised conditions, as described by Breder in 2018, were adapted for the formation of noncyclic ether 32 via the intermolecular reactions of alcohol 15 with alkene 11 [29].In this case, an increase in the loading of Se-catalyst B from 5 mol% to 10 mol% and TAPT from 3 mol% to 5 mol% were necessary.Under these conditions, the desired ether 32 (9 products) was generally obtained at moderate yields after a very long reaction time (many days, 1-12 d).It is possible that these results are due to the long time of the reactions, which may have caused a significant loss of olefinic starting material 11 (Scheme 32).Scheme 32.Synthesis of noncyclic ether 32 [29].
The mechanism for the oxidative functionalisation of alkenes occurs in a similar way.Initially, selenium electrophilic species I reacts with alkene 11 to form seleniranium The previously optimised conditions, as described by Breder in 2018, were adapted for the formation of noncyclic ether 32 via the intermolecular reactions of alcohol 15 with alkene 11 [29].In this case, an increase in the loading of Se-catalyst B from 5 mol% to 10 mol% and TAPT from 3 mol% to 5 mol% were necessary.Under these conditions, the desired ether 32 (9 products) was generally obtained at moderate yields after a very long reaction time (many days, 1-12 d).It is possible that these results are due to the long time of the reactions, which may have caused a significant loss of olefinic starting material 11 (Scheme 32).Scheme 32.Synthesis of noncyclic ether 32 [29].
The mechanism for the oxidative functionalisation of alkenes occurs in a similar way.Initially, selenium electrophilic species I reacts with alkene 11 to form seleniranium Scheme 32.Synthesis of noncyclic ether 32 [29].
In 2018, Zhao and co-workers [40] developed an appropriate approach for oxidative allylic fluorination catalysed by organoselenium compounds.The oxidant and fluorine source in this process was the bulky electrophilic fluorinating reagent N-fluoro-2,4,6-trimethylpyridinium triflate [TMFP][OTf].Interestingly, TEMPO, as an additive, increases the fluorination rating, resulting in an improved substrate scope and functional group tolerance.
Several diselenides were explored in an effort to ramp up the oxidation of the selenide moiety in the intermediates, focused on improving the efficiency of the turnover-limiting deselenenylation process.Additionally, to avoid catalyst degradation, different additives were examined further, and it was shown that allylic fluoride 34a could be produced in the highest yield when BnSeSeBn (V) was reacted with TEMPO (0.5 equiv.

) and [TMFP][OTf]
(2 equiv.).This is the first study in which dibenzyl diselenide worked efficiently, and its effect on other starting materials was investigated.In general, the dialkyl diselenides were more efficient than the diaryl diselenides (Scheme 34).
Molecules 2023, 28, x FOR PEER REVIEW intermediate II.Intermediate II suffers from a nucleophilic attack to give comp by a ring opening in an anti-specific manner.Afterwards, the anti β-eliminatio occurs under oxidative conditions, recycling electrophilic selenium species I fo cycle, and the target 32 derivative compound is formed from allylic function (Scheme 33).Scheme 33.Proposed mechanism for the oxidative functionalisation of alkenes.
In 2018, Zhao and co-workers [40] developed an appropriate approach for o allylic fluorination catalysed by organoselenium compounds.The oxidant and source in this process was the bulky electrophilic fluorinating reagent N-fluo trimethylpyridinium triflate [TMFP][OTf].Interestingly, TEMPO, as an a increases the fluorination rating, resulting in an improved substrate scope and fu group tolerance.
Several diselenides were explored in an effort to ramp up the oxidatio selenide moiety in the intermediates, focused on improving the efficiency of the tu limiting deselenenylation process.Additionally, to avoid catalyst degradation, additives were examined further, and it was shown that allylic fluoride 34a c produced in the highest yield when BnSeSeBn (V) was reacted with TEMPO (0.5 and [TMFP][OTf] (2 equiv.).This is the first study in which dibenzyl diselenide efficiently, and its effect on other starting materials was investigated.In gen dialkyl diselenides were more efficient than the diaryl diselenides (Scheme 34).Scheme 34.Catalyst evaluation for the synthesis of compound 34a [40].In 2018, Zhao and co-workers [40] developed an appropriate approach for o allylic fluorination catalysed by organoselenium compounds.The oxidant and source in this process was the bulky electrophilic fluorinating reagent N-fluo trimethylpyridinium triflate [TMFP][OTf].Interestingly, TEMPO, as an a increases the fluorination rating, resulting in an improved substrate scope and fu group tolerance.
Several diselenides were explored in an effort to ramp up the oxidation selenide moiety in the intermediates, focused on improving the efficiency of the tu limiting deselenenylation process.Additionally, to avoid catalyst degradation, d additives were examined further, and it was shown that allylic fluoride 34a c produced in the highest yield when BnSeSeBn (V) was reacted with TEMPO (0.5 and [TMFP][OTf] (2 equiv.).This is the first study in which dibenzyl diselenide efficiently, and its effect on other starting materials was investigated.In gene dialkyl diselenides were more efficient than the diaryl diselenides (Scheme 34).Scheme 34.Catalyst evaluation for the synthesis of compound 34a [40].
By using the developed method, the authors were able to produce 21 pro allylic fluoride 34, with yields ranging from 46% to 98%.The reaction was efficien various functional groups in substrate 33, such as olefinic esters, amides, s Scheme 34.Catalyst evaluation for the synthesis of compound 34a [40].
By using the developed method, the authors were able to produce 21 products of allylic fluoride 34, with yields ranging from 46% to 98%.The reaction was efficient for the various functional groups in substrate 33, such as olefinic esters, amides, sulfones, phosphonates, and nitriles (Scheme 35).In order to achieve greater yields, electron-rich diselenide catalyst B was utilised in the reaction for the 34d, 34e, 34l, 34m, and 34o compounds.
The mechanism proposed by the authors begins with the oxidative cleavage of diselenide V, which releases the electrophilic species BnSeF I and BnSeOTf.Seleniranium ion II is formed when BnSeF I interacts with olefinic ester 33.phosphonates, and nitriles (Scheme 35).In order to achieve greater yields, electron-rich diselenide catalyst B was utilised in the reaction for the 34d, 34e, 34l, 34m, and 34o compounds.Breder and co-workers [30], in 2019, described the synthesis and application of several chiral selenium-π-acid catalysts in the asymmetric oxidative functionalisation of alkenes.The synthesised Se-catalysts were applied in intermolecular enantioselective imidation under thermic conditions, as well as for enantioselective aerobic lactonisation under photoredox conditions.In the Breder protocol, selenides and diselenides were tested; however, in this review, only the diselenides are reported (Scheme 37).
Initially, the enantioselective imidation of alkene was evaluated by the authors, and equivalent amounts of benzyl pent-3-enoate 33b and N-fluorobenzenesulfonimide 35 were reacted in the presence of 5 mol% of different diselenides as the catalysts (4 Å MS at r.t. for 16 h).The cyclic diselenides, C, D, AF, AG, containing protected 1,2-diols were evaluated; when the 1,2-diols were protected, with acetal C (derivative of acetone) used as the catalyst, product 36a was obtained at a moderate yield (50%) and enantiomeric ratio (51.5:48.5).Similar results were observed when diselenides containing the pivaloyl AF and benzoyl AG protective groups were tested, and in these cases, product 36a was formed at yields of 49% and 52%, as well as 54:46 and 58:42 for e.r., respectively.On the other hand, when cyclic diselenide D (containing the protected 1,2-diols with a carbonate group) was checked, and an increase in both the yield (81%) and e.r.75:25 was observed for target product 36a.This study was limited because the reaction scope of the method was not investigated for other starting materials (Scheme 37).
Molecules 2023, 28, x FOR PEER REVIEW 27 of 55 Breder and co-workers [30], in 2019, described the synthesis and application of several chiral selenium-π-acid catalysts in the asymmetric oxidative functionalisation of alkenes.The synthesised Se-catalysts were applied in intermolecular enantioselective imidation under thermic conditions, as well as for enantioselective aerobic lactonisation under photoredox conditions.In the Breder protocol, selenides and diselenides were tested; however, in this review, only the diselenides are reported (Scheme 37).Scheme 37. Catalyst evaluation for the synthesis of compound 36a [30].
Initially, the enantioselective imidation of alkene was evaluated by the authors, and equivalent amounts of benzyl pent-3-enoate 33b and N-fluorobenzenesulfonimide 35 were reacted in the presence of 5 mol% of different diselenides as the catalysts (4 Å MS at r.t. for 16 h).The cyclic diselenides, C, D, AF, AG, containing protected 1,2-diols were evaluated; when the 1,2-diols were protected, with acetal C (derivative of acetone) used as the catalyst, product 36a was obtained at a moderate yield (50%) and enantiomeric ratio (51.5:48.5).Similar results were observed when diselenides containing the pivaloyl AF and benzoyl AG protective groups were tested, and in these cases, product 36a was formed at yields of 49% and 52%, as well as 54:46 and 58:42 for e.r., respectively.On the other hand, when cyclic diselenide D (containing the protected 1,2-diols with a carbonate group) was checked, and an increase in both the yield (81%) and e.r.75:25 was observed for target product 36a.This study was limited because the reaction scope of the method was not investigated for other starting materials (Scheme 37).
In 2019, Denmark and co-workers [41] developed a study based on an enantioselective syn-dichlorination of alkenes 37 or 38.In this work, 23 diselenides were evaluated as catalysts for the reaction.Firstly, the authors started studying different diselenides containing ether groups, AH-AL, in the reaction to obtain compound 39a.When utilising diselenide AH, the chlorination formed syn-dichloride under an e.r. of 61:39, showing that chiral diselenides can catalyse enantioselective reactions.The other diselenides that were evaluated showed better reactivity but lower enantioselectivity, reaching a maximum e.r. of 58:42 (AK) (Scheme 38).Scheme 37. Catalyst evaluation for the synthesis of compound 36a [30].
In 2019, Denmark and co-workers [41] developed a study based on an enantioselective syn-dichlorination of alkenes 37 or 38.In this work, 23 diselenides were evaluated as catalysts for the reaction.Firstly, the authors started studying different diselenides containing ether groups, AH-AL, in the reaction to obtain compound 39a.When utilising diselenide AH, the chlorination formed syn-dichloride under an e.r. of 61:39, showing that chiral diselenides can catalyse enantioselective reactions.The other diselenides that were evaluated showed better reactivity but lower enantioselectivity, reaching a maximum e.r. of 58:42 (AK) (Scheme 38).
The carbonyl oxygen in the diselenide containing urea AR acts as an alternative coordinating group, generating what is anticipated to be a seven-membered ring.Enantiomeric ratios that were greater than the previously recorded (catalyst bearing ether groups) values were found in the dichloride products made with diselenides AM-AR (catalyst bearing carbonyl groups), with syn-addition at a ratio of up to 73:27.In addition, the enantioselectivity improved when diselenide AN was employed, but there was a corresponding reduction in diastereoselectivity (Scheme 39).The diselenides bearing oxazoline groups, AW-BA, showed poor enantioselectivity, producing ratios near that of the racemic mixture but with good diastereoselectivity, with ratios reaching 90:10 (Scheme 39).Moreover, diselenides containing bicyclic groups, J, K, P, AS-AV, were evaluated, showing the best results for syn-dichlorination, with diastereoselectivity rating of >95:05 and an enantioselectivity rating of 76:24 when diselenide catalyst AT was used.Similar Scheme 38.Catalyst evaluation for the synthesis of compound 40a by syn-dichlorination of alkenes [41].
The carbonyl oxygen in the diselenide containing urea AR acts as an alternative co-ordinating group, generating what is anticipated to be a seven-membered ring.Enantiomeric ratios that were greater than the previously recorded (catalyst bearing ether groups) values were found in the dichloride products made with diselenides AM-AR (catalyst bearing carbonyl groups), with syn-addition at a ratio of up to 73:27.In addition, the enantioselectivity improved when diselenide AN was employed, but there was a corresponding reduction in diastereoselectivity (Scheme 39).The diselenides bearing oxazoline groups, AW-BA, showed poor enantioselectivity, producing ratios near that of the racemic mixture but with good diastereoselectivity, with ratios reaching 90:10 (Scheme 39).Moreover, Scheme 39.Catalyst evaluation for the synthesis of compound 40a via the syn-dichlorination of alkenes [41].
The availability of the developed method to obtain different products was limited.Only two different alkenes were applied in the syn-dichlorination reaction, using diselenide J as the catalyst.In both cases, the obtained products, 40b and 40c, showed an enantioselectivity ratio similar to compound 40a (previously optimised) (Scheme 40).
The authors proposed a mechanistic pathway based on previous works.In the selenium (IV) path, firstly, diorganyl diselenide J is oxidised twice, reaching organylselenyl trichloride V, which reacts with olefin 38, producing seleniranium ion VII.The synthesis of α'-alkoxy enone 42 starting from allenyl ether 41 was enabled by oxygenated rearrangement, which is promoted through an organoselenium-based π-acidtype catalysis [42].In this method, 20 mol% of diphenyl diselenide A was utilised as the catalyst in a mixture of MeCN and THF as solvents at r.t.In addition, to prove the versatility of the protocol, various allenyl ethers, 41, were applied under the optimal conditions, obtaining 22 compounds of 42, with yields ranging from 40% to 76% and good (E)-diastereoselectivity (Scheme 42).The synthesis of α'-alkoxy enone 42 starting from allenyl ether 41 was enabled by oxygenated rearrangement, which is promoted through an organoselenium-based π-acidtype catalysis [42].In this method, 20 mol% of diphenyl diselenide A was utilised as the catalyst in a mixture of MeCN and THF as solvents at r.t.In addition, to prove the versatility of the protocol, various allenyl ethers, 41, were applied under the optimal conditions, obtaining 22 compounds of 42, with yields ranging from 40% to 76% and good (E)-diastereoselectivity (Scheme 42).
In addition, the authors proposed a mechanism for the developed method.Firstly, diphenyl diselenide A is converted into selenium species PhSe(OTf) I using the oxidising agent [PyF][OTf].After that, a regioselective carbophilic reaction with the terminal allene 41 double bond results in the formation of intermediate alkenyl seleniranium II, which is in syn conformation due to stabilisation by Se-O noncovalent interaction.Subsequently, the nucleophilic addition of the water generates intermediate III, which is in equilibrium with the more stable tautomer IV.Next, the abstraction of the acidic hydrogen, which promotes the elimination of alcohol 15 and the production of selenonium V, is performed by the free pyridine in the medium.Further, selenonium V is oxidised by [PyF][OTf], generating selenonium species VI.Lastly, the previously generated alcohol 15 reacts with intermediate VI, allowing for the formation of the final product, 42, and the regeneration of the PhSe(OTf) I catalyst species (Scheme 43).Scheme 42.Synthesis of α'-alkoxy enone 42 compounds [42].
In addition, the authors proposed a mechanism for the developed method.Firstly diphenyl diselenide A is converted into selenium species PhSe(OTf) I using the oxidising agent [PyF][OTf].After that, a regioselective carbophilic reaction with the terminal allene 41 double bond results in the formation of intermediate alkenyl seleniranium II, which i in syn conformation due to stabilisation by Se-O noncovalent interaction.Subsequently the nucleophilic addition of the water generates intermediate III, which is in equilibrium with the more stable tautomer IV.Next, the abstraction of the acidic hydrogen, which promotes the elimination of alcohol 15 and the production of selenonium V, is performed by the free pyridine in the medium.Further, selenonium V is oxidised by [PyF][OTf] generating selenonium species VI.Lastly, the previously generated alcohol 15 reacts with intermediate VI, allowing for the formation of the final product, 42, and the regeneration of the PhSe(OTf) I catalyst species (Scheme 43).In 2020, Zhang and co-workers [43] proposed a N 1 -and N 2 -selective aza-Wacke reaction catalysed by diphenyl diselenide A. The method involves the reaction of alkene 11 with benzotriazole 43 for the synthesis of different N 1 -and N 2 -olefinated benzotriazol 44 or 45.For N 1 -olefinated benzotriazole 44, the best reaction conditions were shown to be 0.5 mmol of 11 and 43, 5 mol% of diphenyl diselenide A, and 1.2 equiv. of Selectfluor Scheme 43.Proposed mechanism for the synthesis of α'-alkoxy enone 42 compounds.
In 2020, Zhang and co-workers [43] proposed a N 1 -and N 2 -selective aza-Wacker reaction catalysed by diphenyl diselenide A. The method involves the reaction of alkene 11 Under the optimised conditions, 37 target compounds of 44 with yields ranging from 41% to 95% were obtained.The reaction was successfully employed in the intermolecular hydroazolylation of electron-rich alkene 46 with azole 43, using vinyl ethers, enamides, and enamine.Moreover, the proposed approach is suitable for the economical synthesis of pharmaceutically significant azolyl 44 hemiaminal ethers and aminals in reasonable to exceptional yields (Scheme 47).minimal catalyst loadings.In this work, the optimal reaction conditions were 0.3 azole 43, 0.6 mmol of 46, diphenyl diselenide A as the catalyst (2 mol%), and LiClO electrolyte (1 equiv.) in a mixture of DCE:MeCN:N,N-dimethylformamide (9:0.9:0.1) as the solvent.Additionally, Pt net electrodes (1.0 cm × 2.0 cm) were us undivided cell pattern.
Under the optimised conditions, 37 target compounds of 44 with yields rangi 41% to 95% were obtained.The reaction was successfully employed in the interm hydroazolylation of electron-rich alkene 46 with azole 43, using vinyl ethers, en and enamine.Moreover, the proposed approach is suitable for the economical s of pharmaceutically significant azolyl 44 hemiaminal ethers and aminals in reaso exceptional yields (Scheme 47).Scheme 47. Synthesis of the compounds of 44 [44].
Further, the notable advantages of this electro-selenocatalytic technique minimal catalyst loads, external oxidant-free conditions, high current ra regioselectivities, and great functional group tolerance, as proven by the azolyl natural product-derived alkenes.

Oxidation and Reduction Reactions
Diorganyl diselenides are well known for having oxidising behaviour.In this the oxidation of alcohols and aldehydes, among others, and redox condensation r are shown.Usually, the organoselenium catalysts act together with some s terminal oxidants, such as hydrogen peroxide or atmospheric oxygen.In additio dibenzyl diselenide, as well as the most frequently used diphenyl diselenide heterogeneous catalysts containing selenium in their structure were used in the described in this section.
In 2018, da Silva Júnior and co-workers [45] developed the synthesis of trypa quinone 48 through the oxidation of naphthol 47 using organoselenium A and hy peroxide (as a cheap and easy-to-handle oxidising agent).Initially, the authors stu oxidation with three different diselenides, studying diphenyl diselenide substitu Scheme 47. Synthesis of the compounds of 44 [44].
Further, the notable advantages of this electro-selenocatalytic technique include minimal catalyst loads, external oxidant-free conditions, high current rates and regioselectivities, and great functional group tolerance, as proven by the azolylation of natural product-derived alkenes.

Oxidation and Reduction Reactions
Diorganyl diselenides are well known for having oxidising behaviour.In this section, the oxidation of alcohols and aldehydes, among others, and redox condensation reactions are shown.Usually, the organoselenium catalysts act together with some selective terminal oxidants, such as hydrogen peroxide or atmospheric oxygen.In addition to the dibenzyl diselenide, as well as the most frequently used diphenyl diselenide catalyst, heterogeneous catalysts containing selenium in their structure were used in the studies described in this section.
In 2018, da Silva Júnior and co-workers [45] developed the synthesis of trypanocidal quinone 48 through the oxidation of naphthol 47 using organoselenium A and hydrogen peroxide (as a cheap and easy-to-handle oxidising agent).Initially, the authors studied the oxidation with three different diselenides, studying diphenyl diselenide substituted with EDGs [bis(p-methoxyphenyl)selenide W] or EWGs [bis(p-chlorophenyl) diselenide N].In the preliminary studies, diphenyl diselenide showed the best results, obtaining the oxidation of 5-iodonaphthalen-1-ol 48a at a 100% yield.Under the optimised conditions, 18 products of 48 were obtained, with yields ranging from 30% to 100%.Various functional groups were suitable for the developed reaction, showing the selectivity of the method (Scheme 48).
The mechanism proposed by the authors starts with the oxidation of dipheny diselenide A, producing benzeneseleninoperoxoic acid I. Subsequently, the reaction o benzeneseleninoperoxoic acid I with naphthol 47 generates epoxide III, which undergoe hydrogen abstraction to produce intermediate IV.Lastly, the oxidation of intermediat IV generates the final product, 48 (Scheme 49).Diselenide supported on silica-coated Fe3O4 magnetic nanoparticles was devised produced, and presented in the work of Nemati [46] as a new and magneticall recoverable heterogeneous catalyst, BB.Moreover, the efficiency of the developed catalys was studied in the oxidation of aldehyde 49 to carboxylic acid 50 in an aqueous medium As the best reaction conditions for 1 mmol of aldehyde 49, 20 mg of the catalyst BB and 4.9 equiv. of H2O2 were used at 60 °C for 1.5 h.Aldehyde 49, containing both EDGs and EWGs, was suitable for oxidation; however, those containing EDGs showed better results In addition, aldehyde 49 (cinnamaldehyde and those containing an aliphatic chain) wa Scheme 48.Synthesis of quinone 48 [45].
The mechanism proposed by the authors starts with the oxidation of diphenyl diselenide A, producing benzeneseleninoperoxoic acid I. Subsequently, the reaction of benzeneseleninoperoxoic acid I with naphthol 47 generates epoxide III, which undergoes hydrogen abstraction to produce intermediate IV.Lastly, the oxidation of intermediate IV generates the final product, 48 (Scheme 49).
The mechanism proposed by the authors starts with the oxidation diselenide A, producing benzeneseleninoperoxoic acid I. Subsequently, t benzeneseleninoperoxoic acid I with naphthol 47 generates epoxide III, wh hydrogen abstraction to produce intermediate IV.Lastly, the oxidation o IV generates the final product, 48 (Scheme 49).Diselenide supported on silica-coated Fe3O4 magnetic nanoparticles produced, and presented in the work of Nemati [46] as a new and recoverable heterogeneous catalyst, BB.Moreover, the efficiency of the deve was studied in the oxidation of aldehyde 49 to carboxylic acid 50 in an aqu As the best reaction conditions for 1 mmol of aldehyde 49, 20 mg of the ca 4.9 equiv. of H2O2 were used at 60 °C for 1.5 h.Aldehyde 49, containing b EWGs, was suitable for oxidation; however, those containing EDGs showed In addition, aldehyde 49 (cinnamaldehyde and those containing an alipha Diselenide supported on silica-coated Fe 3 O 4 magnetic nanoparticles was devised, produced, and presented in the work of Nemati [46] as a new and magnetically recoverable heterogeneous catalyst, BB.Moreover, the efficiency of the developed catalyst was studied in the oxidation of aldehyde 49 to carboxylic acid 50 in an aqueous medium.As the best reaction conditions for 1 mmol of aldehyde 49, 20 mg of the catalyst BB and 4.9 equiv. of H 2 O 2 were used at 60 • C for 1.5 h.Aldehyde 49, containing both EDGs and EWGs, was suitable for oxidation; however, those containing EDGs showed better results.In addition, aldehyde 49 (cinnamaldehyde and those containing an aliphatic chain) was effectively oxidised and yielded the respective carboxylic acid, 50, in high yields (Scheme 50).
effectively oxidised and yielded the respective carboxylic acid, 50, in high yields (Scheme 50).In the first step of the mechanism, the oxidation of catalyst BB by H2O2 generates seleninic acid I. Afterwards, H2O2 oxidises seleninic acid I, promoting the formation of peroxyseleninic acid II, which reacts with aldehyde 49 and generates intermediate III.
After the intramolecular rearrangement promoted by the H bond interaction of intermediate III, product 50 is released and seleninic acid I is renewed for the catalytic cycle (Scheme 51).In 2018, Yang and co-workers [47] developed the oxidation of alkene 11 with trimethylsilyl azide (TMSN3) 51 in air at r.t., resulting in a new and simple visible-lightenabled approach for the synthesis of α-azidoketone 52.Using cheap and low-toxic Rose Bengal (RB) (1 mol%) and diphenyl diselenide (5 mol%) A as co-catalysts, a series of α- In the first step of the mechanism, the oxidation of catalyst BB by H2O2 generates seleninic acid I. Afterwards, H2O2 oxidises seleninic acid I, promoting the formation of peroxyseleninic acid II, which reacts with aldehyde 49 and generates intermediate III.
After the intramolecular rearrangement promoted by the H bond interaction of intermediate III, product 50 is released and seleninic acid I is renewed for the catalytic cycle (Scheme 51).In 2018, Yang and co-workers [47] developed the oxidation of alkene 11 with trimethylsilyl azide (TMSN3) 51 in air at r.t., resulting in a new and simple visible-lightenabled approach for the synthesis of α-azidoketone 52.Using cheap and low-toxic Rose Bengal (RB) (1 mol%) and diphenyl diselenide (5 mol%) A as co-catalysts, a series of α-Scheme 51.Proposed mechanism for the synthesis of carboxylic acid 50.
In 2018, Yang and co-workers [47] developed the oxidation of alkene 11 with trimethylsilyl azide (TMSN 3 ) 51 in air at r.t., resulting in a new and simple visible-light-enabled approach for the synthesis of α-azidoketone 52.Using cheap and low-toxic Rose Bengal (RB) (1 mol%) and diphenyl diselenide (5 mol%) A as co-catalysts, a series of α-azidoketones, 52, could be quickly and effectively produced in moderate to good yields by cascade C-N and C=O bond formation.
With this method in hand, the authors were able to synthesise 21 compounds of 52, with yields ranging from 41% to 97% (Scheme 52).When using this procedure, aromatic alkene 11 with either EDGs or EWGs on the aryl rings proved to be appropriate for the reaction.The substrates' electronic effect has a significant impact on how efficiently the reaction proceeds and those bearing substituted aromatic alkenes with strong EDGs gave the target product at a better yield than those with strong EWGs.In addition, different functional groups and substrates containing steric hindrance were suitable for the reaction.However, none of the expected products were obtained when aliphatic alkenes, like hex-1ene and cyclopentene, were employed as substrates.
Molecules 2023, 28, x FOR PEER REVIEW 38 of 55 azidoketones, 52, could be quickly and effectively produced in moderate to good yields by cascade C-N and C=O bond formation.With this method in hand, the authors were able to synthesise 21 compounds of 52, with yields ranging from 41% to 97% (Scheme 52).When using this procedure, aromatic alkene 11 with either EDGs or EWGs on the aryl rings proved to be appropriate for the reaction.The substrates' electronic effect has a significant impact on how efficiently the reaction proceeds and those bearing substituted aromatic alkenes with strong EDGs gave the target product at a better yield than those with strong EWGs.In addition, different functional groups and substrates containing steric hindrance were suitable for the reaction.However, none of the expected products were obtained when aliphatic alkenes, like hex-1-ene and cyclopentene, were employed as substrates.
The mechanism proposed by the authors is shown in Scheme 53.Initially, RB was used to create excited RB * under the influence of visible light.After that, TMSN3 51 and RB * underwent a SET reaction, resulting in the formation of azido radical I and RB •-radical anions.Moreover, the oxidation of RB •− by molecular oxygen (air) would result in the formation of the ground state RB and O2 •− .Alkene 11 was then combined with azido radical I to create alkyl radical II.Subsequently, hydroperoxide intermediate III was produced by the reaction of radical II with O2 •− and H2O.Reactive organoselenium species V and PhSeOH IV were produced when hydroperoxide III oxidised diphenyl diselenide A. The target product, 52, was finally formed through the reaction of PhSeOH IV with reactive intermediate V while also regenerating diphenyl diselenide A and eliminating water (Scheme 53).Scheme 52.Synthesis of α-azidoketone 52 [47].
The mechanism proposed by the authors is shown in Scheme 53.Initially, RB was used to create excited RB * under the influence of visible light.After that, TMSN 3 51 and RB * underwent a SET reaction, resulting in the formation of azido radical I and RB •− radical anions.Moreover, the oxidation of RB •− by molecular oxygen (air) would result in the formation of the ground state RB and O 2 •− .Alkene 11 was then combined with azido radical I to create alkyl radical II.Subsequently, hydroperoxide intermediate III was produced by the reaction of radical II with O 2 •− and H 2 O. Reactive organoselenium species V and PhSeOH IV were produced when hydroperoxide III oxidised diphenyl diselenide A. The target product, 52, was finally formed through the reaction of PhSeOH IV with reactive intermediate V while also regenerating diphenyl diselenide A and eliminating water (Scheme 53).
Molecules 2023, 28, x FOR PEER REVIEW 38 of 55 azidoketones, 52, could be quickly and effectively produced in moderate to good yields by cascade C-N and C=O bond formation.With this method in hand, the authors were able to synthesise 21 compounds of 52, with yields ranging from 41% to 97% (Scheme 52).When using this procedure, aromatic alkene 11 with either EDGs or EWGs on the aryl rings proved to be appropriate for the reaction.The substrates' electronic effect has a significant impact on how efficiently the reaction proceeds and those bearing substituted aromatic alkenes with strong EDGs gave the target product at a better yield than those with strong EWGs.In addition, different functional groups and substrates containing steric hindrance were suitable for the reaction.However, none of the expected products were obtained when aliphatic alkenes, like hex-1-ene and cyclopentene, were employed as substrates.
The mechanism proposed by the authors is shown in Scheme 53.Initially, RB was used to create excited RB * under the influence of visible light.After that, TMSN3 51 and RB * underwent a SET reaction, resulting in the formation of azido radical I and RB •-radical anions.Moreover, the oxidation of RB •− by molecular oxygen (air) would result in the formation of the ground state RB and O2 •− .Alkene 11 was then combined with azido radical I to create alkyl radical II.Subsequently, hydroperoxide intermediate III was produced by the reaction of radical II with O2 •− and H2O.Reactive organoselenium species V and PhSeOH IV were produced when hydroperoxide III oxidised diphenyl diselenide A. The target product, 52, was finally formed through the reaction of PhSeOH IV with reactive intermediate V while also regenerating diphenyl diselenide A and eliminating water (Scheme 53).Scheme 53.Proposed mechanism for the synthesis of α-azidoketone 52.
Liebeskind and co-workers [48] proposed an easy-to-perform organocatalytic process in 2018, which relies on the selenols' capacity to react with oxygen in air directly without the use of metal catalysts.The redox dehydration of p-toluic acid 50a and benzylamine 53a was first evaluated by employing various diselenides as catalysts at 2.5 mol% loadings at 30 • C in MeCN (Scheme 54).Ortho amidic-substituted aryl diselenides BF, BG, and BH were shown to be the most efficient catalysts for the proposed reaction (formation compound 54a).Thus, the location of the attached NMe 2 unit in relation to the amidic N atom points to the major contribution of intramolecular geometric variables to this catalysis, changing the reactivity of diselenide.Liebeskind and co-workers [48] proposed an easy-to-perform organocatalytic process in 2018, which relies on the selenols' capacity to react with oxygen in air directly without the use of metal catalysts.The redox dehydration of p-toluic acid 50a and benzylamine 53a was first evaluated by employing various diselenides as catalysts at 2.5 mol% loadings at 30 °C in MeCN (Scheme 54).Ortho amidic-substituted aryl diselenides BF, BG, and BH were shown to be the most efficient catalysts for the proposed reaction (formation compound 54a).Thus, the location of the attached NMe2 unit in relation to the amidic N atom points to the major contribution of intramolecular geometric variables to this catalysis, changing the reactivity of diselenide.Scheme 54.Catalyst evaluation for the synthesis of compound 54a [48].
For the best reactional conditions, the authors found 2.5 mol% of diselenides BG or BH in MeCN or DMF at 30 °C or 50 °C, using 1.5 equiv. of triethyl phosphite as a terminal reductant for 16 to 28 h in reaction with the starting materials 50 with 53 was optimal.Under these conditions, the authors developed a wide range of amidic and peptidic compounds, 54 (17 products), with yields ranging from 63% to 96%.In general, the authors developed a method with simple aerobic conditions, a properly designed diselenide, and low loadings of organocatalytic oxidants for application in the synthesis of interesting amides and peptides 54 (Scheme 55).Scheme 54.Catalyst evaluation for the synthesis of compound 54a [48].
For the best reactional conditions, the authors found 2.5 mol% of diselenides BG or BH in MeCN or DMF at 30 • C or 50 • C, using 1.5 equiv. of triethyl phosphite as a terminal reductant for 16 to 28 h in reaction with the starting materials 50 with 53 was optimal.Under these conditions, the authors developed a wide range of amidic and peptidic compounds, 54 (17 products), with yields ranging from 63% to 96%.In general, the authors developed a method with simple aerobic conditions, a properly designed diselenide, and low loadings of organocatalytic oxidants for application in the synthesis of interesting amides and peptides 54 (Scheme 55).
In the next year (2019), a similar method was reported by Arora and co-workers [49], which proposed the synthesis of dipeptides using organoselenium catalysis.In this work, redox condensation promotes the formation of selenoester, activating and promoting the reaction on the carboxylic acid.The authors started with a preliminary screening of different organoselenium catalysts: BJ-BN, all containing a urea and a tertiary amine portion.The first reactions were carried out with p-toluic acid 50a, 2 equiv. of benzylamine 53a, 5 mol% of Se catalyst BJ-BN, 1.5 equiv. of tributylphosphine, and 3 Å MS in acetonitrile at r.t.Among the five developed catalysts, the best result was shown when BJ Scheme 55.Synthesis of the amidic and peptidic compounds of 54 [48].
In the next year (2019), a similar method was reported by Arora and co-workers [49], which proposed the synthesis of dipeptides using organoselenium catalysis.In this work, redox condensation promotes the formation of selenoester, activating and promoting the reaction on the carboxylic acid.The authors started with a preliminary screening of different organoselenium catalysts: BJ-BN, all containing a urea and a tertiary amine portion.The first reactions were carried out with p-toluic acid 50a, 2 equiv. of benzylamine 53a, 5 mol% of Se catalyst BJ-BN, 1.5 equiv. of tributylphosphine, and 3 Å MS in acetonitrile at r.t.Among the five developed catalysts, the best result was shown when BJ was used, which generated the final product, 54a, at a 75% yield (Scheme 56).
In the next year (2019), a similar method was reported by Arora and co-workers [49], which proposed the synthesis of dipeptides using organoselenium catalysis.In this work, redox condensation promotes the formation of selenoester, activating and promoting the reaction on the carboxylic acid.The authors started with a preliminary screening of different organoselenium catalysts: BJ-BN, all containing a urea and a tertiary amine portion.The first reactions were carried out with p-toluic acid 50a, 2 equiv. of benzylamine 53a, 5 mol% of Se catalyst BJ-BN, 1.5 equiv. of tributylphosphine, and 3 Å MS in acetonitrile at r.t.Among the five developed catalysts, the best result was shown when BJ was used, which generated the final product, 54a, at a 75% yield (Scheme 56).Scheme 56.Catalyst evaluation for the synthesis of compound 54a [49].Scheme 56.Catalyst evaluation for the synthesis of compound 54a [49].
After choosing the best selenium catalyst (BJ), the versatility of the protocol was evaluated with various commercially available fluorenylmethyloxycarbonyl (Fmoc) amino acids, 50, in the reaction with starting material 53 (Scheme 57).Dipeptide 54, containing alanine, tryptophan, lysine, valine, and a proline moiety, was obtained in high yields using this protocol: 13 products with a yield ranging from 82% to 99%.In addition, the synthesis of an oligopeptide was developed in the solid phase by employing a Se catalyst (BJ), demonstrating the potential of this to react within more than one amine bond upon reaction.
Molecules 2023, 28, x FOR PEER REVIEW 41 of 55 After choosing the best selenium catalyst (BJ), the versatility of the protocol was evaluated with various commercially available fluorenylmethyloxycarbonyl (Fmoc) amino acids, 50, in the reaction with starting material 53 (Scheme 57).Dipeptide 54, containing alanine, tryptophan, lysine, valine, and a proline moiety, was obtained in high yields using this protocol: 13 products with a yield ranging from 82% to 99%.In addition, the synthesis of an oligopeptide was developed in the solid phase by employing a Se catalyst (BJ), demonstrating the potential of this to react within more than one amine bond upon reaction.Scheme 57.Synthesis of dipeptides 54 [49].
Lastly, based on the obtained results, a mechanism was proposed by the authors (Scheme 58).In the first step, selenophosphonium I is generated via the reduction of the Se catalyst (BJ) with tributylphosphine.Selenophosphonium I easily associates with carboxylate 50, producing intermediate II, which undergoes an intramolecular acyl transfer, leading to selenoester III.The consecutive aminolysis of selenoester III generates the final product, 54, plus bis-selenolate IV, which can be oxidised to recover the Se catalyst BJ.Scheme 57.Synthesis of dipeptides 54 [49].
Furthermore, the aerial oxidation of several organothiol 55 compounds was subsequent evaluated in the presence of 1 mol% of the enzyme mimic BO (selenium catalyst).By using the developed method, 29 compounds of 56 were obtained, with a yield ranging from 82% to 97% (Scheme 60).Thiols 55, containing different functional groups, such as alcohol, amine, methoxy, and halogen, was successfully employed in the reaction.In addition, the authors were able to synthesise disulphide by starting from biologically relevant thiols for compound 56q bearing the glutathione moiety.
Lastly, the authors proposed the mechanism as follows (Scheme 61).Selenenyl sulphide II and selenol I are produced when diorganyl diselenide BO interacts with one equivalent of thiol 55.Selenenyl sulphide II may then combine with another thiol 55 molecule to form selenol I, as was estimated.By oxidising selenol I with oxygen, selone Scheme 60.Oxidation reaction of organothiol 55 to diorganyl disulphide 56 [50].
Lastly, the authors proposed the mechanism as follows (Scheme 61).Selenenyl sulphide II and selenol I are produced when diorganyl diselenide BO interacts with one equivalent of thiol 55.Selenenyl sulphide II may then combine with another thiol 55 molecule to form selenol I, as was estimated.By oxidising selenol I with oxygen, selone IV and hydrogen peroxide are created by proton and electron transfer from N-and Se-H bonds (Cycle I).Selenol and the radicals HO 2 • and PhS• might also be formed when selenium sulphide II reacts with oxygen; the second radical then dimerises to form RSSR 56.The catalytic cycle is completed by a proton transfer, which results from the production of selenenyl sulphide II by the nucleophilic addition of sulphur from RSH 55 to the selenium in selone IV.In cycle II, selenol I is oxidised by peroxide, generating selenenic acid III, which is then reduced by a molecule of RSH 55 to produce water and selenenyl sulphide II, which reacts with a second molecule of RSH 55, producing the expected disulphide 56.Xu and co-workers [51] developed a mild and green oxidative deoximation of ketoxime 57a through organoselenium catalyst V and using FeSO4 as a co-catalyst.For the best reaction conditions, the authors found that 1 mmol of ketoxime 57a, 2.5 mol% of benzyl diselenide V and 10 mol% of FeSO4 as catalysts in ethyl acetate as solvent for 24 h at 60 °C was optimal.Under these conditions, the final product, 58a, was obtained at a 96% yield.Moreover, a possible mechanism was proposed whereby FeSO4 initially promotes the oxidation of the diselenide V, forming seleninic acid I, which goes through nucleophilic addition with oxime 57a, generating intermediate II.After a rearrangement, product 58a is formed, and organoselenium intermediate III is released.Following the reduction of intermediate III, a reduced species, PhCH2SeOH IV, and hyponitrous acid (HNO) might be produced.After that, intermediate IV is reduced, regenerating the initial diselenide catalyst V (Scheme 62).This study is noteworthy primarily because it uses an Scheme 61.Proposed mechanism for the oxidation of organothiol 55 to diorganyl disulphide 56.
Xu and co-workers [51] developed a mild and green oxidative deoximation of ketoxime 57a through organoselenium catalyst V and using FeSO 4 as a co-catalyst.For the best reaction conditions, the authors found that 1 mmol of ketoxime 57a, 2.5 mol% of benzyl diselenide V and 10 mol% of FeSO 4 as catalysts in ethyl acetate as solvent for 24 h at 60 • C was optimal.Under these conditions, the final product, 58a, was obtained at a 96% yield.Moreover, a possible mechanism was proposed whereby FeSO 4 initially promotes the oxidation of the diselenide V, forming seleninic acid I, which goes through nucleophilic addition with oxime 57a, generating intermediate II.After a rearrangement, product 58a is formed, and organoselenium intermediate III is released.Following the reduction of intermediate III, a reduced species, PhCH 2 SeOH IV, and hyponitrous acid (HNO) might be produced.After that, intermediate IV is reduced, regenerating the initial diselenide catalyst V (Scheme 62).This study is noteworthy primarily because it uses an aliphatic diselenide, and the synthesised product was isolated at a high yield.reaction compared to the ones containing EWGs (50c: p-Cl, 76%; 50d: p-Br, 78%, and 50e: p-F,72%) (Scheme 64).
After some control experiments, the following mechanism was proposed (Scheme 65).When diphenyl diselenide A is first oxidised with H2O2, it produces peroxide I, which then produces organoselenium species II.H2O2 easily converts benzoin 59 to compound III in the presence of the diphenyl diselenide A catalyst.Oganoselenium intermediate IV is produced by the nucleophilic addition of II to a carbonyl group of III.Following a C-C bond cleavage reaction in intermediate IV, benzoic anhydride VI and benzeneseleninic acid V are produced.While the benzoic anhydride VI is hydrated and generates the desired product, 50, benzeneseleninic acid V is oxidised, promoting the regeneration of II of the catalytic cycle.
Scheme 65.Proposed mechanism for the synthesis of carboxylic acid 50.
Rangraz and co-workers [53] promoted the oxidation of oxime 57 to nitrile 2 by employing a new selenium-based catalyst.In order to create the novel organoselenium functionalised SBA-15 BZ, diphenyl diselenide A was immobilised on Santa Barbara Amorphous-15 (SBA-15), which was previously functionalised with (3-aminopropyl) triethoxysilane.After the synthesis of catalyst BZ, the authors found (as the best reaction) the conditions of 1 mmol of oxime 57, 0.02 g of catalyst BZ, and 2.45 equiv. of hydrogen peroxide in acetonitrile for 10 h at 65 °C to be optimal.With the optimised conditions, 11 Scheme 64.Synthesis of carboxylic acid 50 [52].
After some control experiments, the following mechanism was proposed (Scheme 65).When diphenyl diselenide A is first oxidised with H 2 O 2 , it produces peroxide I, which then produces organoselenium species II.Scheme 64.Synthesis of carboxylic acid 50 [52].
After some control experiments, the following mechanism was proposed (Scheme 65).When diphenyl diselenide A is first oxidised with H2O2, it produces peroxide I, which then produces organoselenium species II.H2O2 easily converts benzoin 59 to compound III in the presence of the diphenyl diselenide A catalyst.Oganoselenium intermediate IV is produced by the nucleophilic addition of II to a carbonyl group of III.Following a C-C bond cleavage reaction in intermediate IV, benzoic anhydride VI and benzeneseleninic acid V are produced.While the benzoic anhydride VI is hydrated and generates the desired product, 50, benzeneseleninic acid V is oxidised, promoting the regeneration of II of the catalytic cycle.
Scheme 65.Proposed mechanism for the synthesis of carboxylic acid 50.
Rangraz and co-workers [53] promoted the oxidation of oxime 57 to nitrile 2 by employing a new selenium-based catalyst.In order to create the novel organoselenium functionalised SBA-15 BZ, diphenyl diselenide A was immobilised on Santa Barbara Amorphous-15 (SBA-15), which was previously functionalised with (3-aminopropyl) triethoxysilane.After the synthesis of catalyst BZ, the authors found (as the best reaction) the conditions of 1 mmol of oxime 57, 0.02 g of catalyst BZ, and 2.45 equiv. of hydrogen peroxide in acetonitrile for 10 h at 65 °C to be optimal.With the optimised conditions, 11 Scheme 65.Proposed mechanism for the synthesis of carboxylic acid 50.
Rangraz and co-workers [53] promoted the oxidation of oxime 57 to nitrile 2 by employing a new selenium-based catalyst.In order to create the novel organoselenium functionalised SBA-15 BZ, diphenyl diselenide A was immobilised on Santa Barbara Amorphous-15 (SBA-15), which was previously functionalised with (3-aminopropyl) triethoxysilane.Af-ter the synthesis of catalyst BZ, the authors found (as the best reaction) the conditions of 1 mmol of oxime 57, 0.02 g of catalyst BZ, and 2.45 equiv. of hydrogen peroxide in acetonitrile for 10 h at 65 • C to be optimal.With the optimised conditions, 11 compounds of 2 were produced in moderate to high yields using a variety of aldoximes, including substrates with EWGs or EDGs and bulky groups.Furthermore, there was no significant reduction in catalytic activity after using catalyst BZ for a minimum of four subsequent cycles (Scheme 66).This is the first report described in this review that uses a heterogeneous catalyst supported on a magnetic material; moreover, it was efficiently used for four recycles in the study carried out by the authors.
Molecules 2023, 28, x FOR PEER REVIEW 46 of 55 compounds of 2 were produced in moderate to high yields using a variety of aldoximes, including substrates with EWGs or EDGs and bulky groups.Furthermore, there was no significant reduction in catalytic activity after using catalyst BZ for a minimum of four subsequent cycles (Scheme 66).This is the first report described in this review that uses a heterogeneous catalyst supported on a magnetic material; moreover, it was efficiently used for four recycles in the study carried out by the authors.
The proposed mechanism begins as the hydrogen peroxide is first used to produce selenenic acid I, which is subsequently transformed into the appropriate selenenic anhydride Afterwards, intermediate III is produced through the condensation of aldoxime 57 with selenenic anhydride II.Next, intermediate III easily converts into the stabilised intermediate IV, which passes through a selenoxide syn-elimination to regenerate the catalytic species I before eliminating nitrile 2 (Scheme 67).
Scheme 67.Proposed mechanism for the synthesis of nitrile 2.
In 2022, Wei and co-workers [54] developed the synthesis of α-keto acetal 61 from the widely accessible terminal alkyne 60 and alcohol 15 by employing an electrochemical method associated with selenium catalyst A. As a feature in this work, the effective Scheme 66. Synthesis of nitrile 2 [53].
The proposed mechanism begins as the hydrogen peroxide is first used to produce selenenic acid I, which is subsequently transformed into the appropriate selenenic anhydride II.Afterwards, intermediate III is produced through the condensation of aldoxime 57 with selenenic anhydride II.Next, intermediate III easily converts into the stabilised intermediate IV, which passes through a selenoxide syn-elimination to regenerate the catalytic species I before eliminating nitrile 2 (Scheme 67).
Molecules 2023, 28, x FOR PEER REVIEW 46 of 55 compounds of 2 were produced in moderate to high yields using a variety of aldoximes, including substrates with EWGs or EDGs and bulky groups.Furthermore, there was no significant reduction in catalytic activity after using catalyst BZ for a minimum of four subsequent cycles (Scheme 66).This is the first report described in this review that uses a heterogeneous catalyst supported on a magnetic material; moreover, it was efficiently used for four recycles in the study carried out by the authors.
The proposed mechanism begins as the hydrogen peroxide is first used to produce selenenic acid I, which is subsequently transformed into the appropriate selenenic anhydride II.Afterwards, intermediate III is produced through the condensation of aldoxime 57 with selenenic anhydride II.Next, intermediate III easily converts into the stabilised intermediate IV, which passes through a selenoxide syn-elimination to regenerate the catalytic species I before eliminating nitrile 2 (Scheme 67).
Scheme 67.Proposed mechanism for the synthesis of nitrile 2.
In 2022, Wei and co-workers [54] developed the synthesis of α-keto acetal 61 from the widely accessible terminal alkyne 60 and alcohol 15 by employing an electrochemical method associated with selenium catalyst A. As a feature in this work, the effective Scheme 67.Proposed mechanism for the synthesis of nitrile 2.
In 2022, Wei and co-workers [54] developed the synthesis of α-keto acetal 61 from the widely accessible terminal alkyne 60 and alcohol 15 by employing an electrochemical method associated with selenium catalyst A. As a feature in this work, the effective combination of electrochemical oxidation and organic selenium catalysis easily avoided the need for external chemical oxidants.This dual catalytic system produced a variety of the α-keto acetals of 61 with moderate to good yields at r.t.A wide range of the substituted alkynes of 60 and aliphatic alcohols of 15 were suitable for the reaction, reaching 21 compounds of 61 with 51% to 95% yields (Scheme 68).
Molecules 2023, 28, x FOR PEER REVIEW 47 of 55 combination of electrochemical oxidation and organic selenium catalysis easily avoided the need for external chemical oxidants.This dual catalytic system produced a variety of the α-keto acetals of 61 with moderate to good yields at r.t.A wide range of the substituted alkynes of 60 and aliphatic alcohols of 15 were suitable for the reaction, reaching 21 compounds of 61 with 51% to 95% yields (Scheme 68).
The first step of the proposed mechanism is the selenium cation III being produced on the anode by a SET from diphenyl diselenide A. Subsequently, intermediate I goes through a Se-Se bond cleavage, generating radical II and electrophilic selenium species III.The reaction of electrophilic selenium III with alkyne 60 promotes the formation of seleniranium IV, which undergoes a nucleophilic addition of alcohol 15, forming intermediate V.Then, intermediate V goes through a new sequence of formation with seleniranium VI, followed by the nucleophilic addition of alcohol 15, generating intermediate VII.Lastly, a process of alcoholysis is followed by hydrolysis, which leads to the formation of the final product, 61 (Scheme 69).
Scheme 69.Proposed mechanism for the synthesis of α-keto acetal 61.
The synthesis of nitroarene 63 through the oxidation of aniline 62 catalysed by selenium in water, was developed by Tanini and co-workers in 2023 [55].The developed Scheme 68.Synthesis of α-keto acetal 61 [54].
The first step of the proposed mechanism is the selenium cation III being produced on the anode by a SET from diphenyl diselenide A. Subsequently, intermediate I goes through a Se-Se bond cleavage, generating radical II and electrophilic selenium species III.The reaction of electrophilic selenium III with alkyne 60 promotes the formation of seleniranium IV, which undergoes a nucleophilic addition of alcohol 15, forming intermediate V.Then, intermediate V goes through a new sequence of formation with seleniranium VI, followed by the nucleophilic addition of alcohol 15, generating intermediate VII.Lastly, a process of alcoholysis is followed by hydrolysis, which leads to the formation of the final product, 61 (Scheme 69).
Molecules 2023, 28, x FOR PEER REVIEW 47 of 55 combination of electrochemical oxidation and organic selenium catalysis easily avoided the need for external chemical oxidants.This dual catalytic system produced a variety of the α-keto acetals of 61 with moderate to good yields at r.t.A wide range of the substituted alkynes of 60 and aliphatic alcohols of 15 were suitable for the reaction, reaching 21 compounds of 61 with 51% to 95% yields (Scheme 68).
The first step of the proposed mechanism is the selenium cation III being produced on the anode by a SET from diphenyl diselenide A. Subsequently, intermediate I goes through a Se-Se bond cleavage, generating radical II and electrophilic selenium species III.The reaction of electrophilic selenium III with alkyne 60 promotes the formation of seleniranium IV, which undergoes a nucleophilic addition of alcohol 15, forming intermediate V.Then, intermediate V goes through a new sequence of formation with seleniranium VI, followed by the nucleophilic addition of alcohol 15, generating intermediate VII.Lastly, a process of alcoholysis is followed by hydrolysis, which leads to the formation of the final product, 61 (Scheme 69).
Scheme 69.Proposed mechanism for the synthesis of α-keto acetal 61.
The synthesis of nitroarene 63 through the oxidation of aniline 62 catalysed by selenium in water, was developed by Tanini and co-workers in 2023 [55].The developed Scheme 69.Proposed mechanism for the synthesis of α-keto acetal 61.
The synthesis of nitroarene 63 through the oxidation of aniline 62 catalysed by selenium in water, was developed by Tanini and co-workers in 2023 [55].The developed method employs 20 mol% of diphenyl diselenide A as the catalyst and a large amount of H 2 O 2 (15 equiv.)as the oxidising agent in water for 3 h at r.t.Under the optimised reaction conditions, a variety of the nitroarenes of 63 were readily synthesised, with a yield ranging from 55% to 97% (Scheme 70).The Se-mediated approach worked well to successfully convert aniline 62, containing both EDG and EWG substituents, with regard to the respective substituted nitro-derivatives of 63. materials 64 and 11 were efficiently reacted, producing the target phosphate products of 65 (24 products) with yields ranging from moderate to excellent (31-95%) (Scheme 72).
In 2020, Arora and co-workers [57] reported the use of diaryl diselenide CA as a catalyst in the Atherton-Todd reaction to perform a functionalisation of hydrophosphoryl compounds through the reaction of starting materials containing phosphorus 66 with nucleophiles 15, 55, 53, or 62.The authors performed a preliminary screening of different diaryl diselenides, and the best result was obtained when Se-Cat CA was used (Scheme 73).
The protocol describes the reaction of phosphine oxide or H-phosphonate 66 with amines 53 or 62 in the presence of 5 mol% 1,2-bis(3,5-bis(trifluoromethyl)phenyl) diselenide CA as the catalyst and MeCN as the solvent at 60 °C.Under these conditions, Scheme 72.Synthesis of allylic phosphate 65 [56].
In 2020, Arora and co-workers [57] reported the use of diaryl diselenide CA as a catalyst in the Atherton-Todd reaction to perform a functionalisation of hydrophosphoryl compounds through the reaction of starting materials containing phosphorus 66 with nucleophiles 15, 55, 53, or 62.The authors performed a preliminary screening of different diaryl diselenides, and the best result was obtained when Se-Cat CA was used (Scheme 73).
In 2020, Arora and co-workers [57] reported the use of diaryl diselenide CA as a catalyst in the Atherton-Todd reaction to perform a functionalisation of hydrophosphoryl compounds through the reaction of starting materials containing phosphorus 66 with nucleophiles 15, 55, 53, or 62.The authors performed a preliminary screening of different diaryl diselenides, and the best result was obtained when Se-Cat CA was used (Scheme 73).
The protocol describes the reaction of phosphine oxide or H-phosphonate 66 with amines 53 or 62 in the presence of 5 mol% 1,2-bis(3,5-bis(trifluoromethyl)phenyl) diselenide CA as the catalyst and MeCN as the solvent at 60 °C.Under these conditions, Scheme 73.Functionalisation of hydrophosphoryl compounds via the Atherton−Todd reaction [57].
The protocol describes the reaction of phosphine oxide or H-phosphonate 66 with amines 53 or 62 in the presence of 5 mol% 1,2-bis(3,5-bis(trifluoromethyl)phenyl) diselenide CA as the catalyst and MeCN as the solvent at 60 • C.Under these conditions, several phosphoramidate, phosphonamidate, and phosphinamide 69 compounds were obtained (18) at moderate to excellent yields (36-98%).This approach was extended to phenols or alcohol 15 and thiophenol 55, but in these cases, it was necessary to use 5 mol% of 4-(dimethylamino)pyridine (DMAP) as the base.When phenols or alcohols 15 or 55 were used as the starting materials, phosphate 67 (7 products) was obtained, whereas when thiophenol 55 was used, the target phosphorothioate 68a was generated at an excellent yield (99%) (Scheme 73).
The plausible mechanism described by the authors starts with the equilibrium of R several phosphoramidate, phosphonamidate, and phosphinamide 69 compounds were obtained (18) at moderate to excellent yields (36-98%).This approach was extended to phenols or alcohol 15 and thiophenol 55, but in these cases, it was necessary to use 5 mol% of 4-(dimethylamino)pyridine (DMAP) as the base.When phenols or alcohols 15 or 55 were used as the starting materials, phosphate 67 (7 products) was obtained, whereas when thiophenol 55 was used, the target phosphorothioate 68a was generated at an excellent yield (99%) (Scheme 73).In 2021, Tang and co-workers [58] described a halogen-and transition metal-free protocol for the synthesis of triaryl phosphite 71 through the reaction of phosphorus (P4) 70 with phenol 15 using diphenyl diselenide A as the catalyst.In this strategy, selenium catalyst A reacted with P4 to obtain the P-Se compound intermediate, which undergoes a nucleophilic substitution with phenol 15 to form the target triaryl phosphite 71 (Scheme 75).Scheme 74.Proposed mechanism for the functionalisation of hydrophosphoryl compounds.
In 2021, Tang and co-workers [58] described a halogen-and transition metal-free protocol for the synthesis of triaryl phosphite 71 through the reaction of phosphorus (P 4 ) 70 with phenol 15 using diphenyl diselenide A as the catalyst.In this strategy, selenium catalyst A reacted with P 4 to obtain the P-Se compound intermediate, which undergoes a nucleophilic substitution with phenol 15 to form the target triaryl phosphite 71 (Scheme 75).
Tang's protocol tolerated several of the phenols of 15 when reacted with P 4 (in a toluene solution), 25 mol% of K 3 PO 4 as the base, 25 mol% of diphenyl diselenide A as the catalyst, and dimethyl sulfoxide (DMSO) as the solvent at 60 • C for 4-6 h under an argon atmosphere.Under these conditions, the target triaryl phosphites 71a-l (12 compounds) were obtained, with yields ranging from good to excellent (66-95%).The method was efficient for several EDGs (Me, t Bu, MeO, EtO, BnO, or MeS) bonded in the aromatic ring of phenol 15.Similar results were obtained for 1-naphthalenol, 2-naphthalenol, and 4-phenyl phenol; in these cases, the desired triaryl phosphites 71j, 71k, and 71h were obtained at yields of 71% (6 h), 76% (6 h), and 66% (6 h), respectively.Phenol, as well as the phenol substituted with an acetal group, was also used as a starting material, which produced compounds 71e and 71i at yields of 88% (6 h) and 78% (5 h), respectively (Scheme 75).
The proposed mechanism for the synthesis of triaryl phosphite 71 starts with the reaction of phenolates I (or a base Tang's protocol tolerated several of the phenols of 15 when reacted with P4 (in a toluene solution), 25 mol% of K3PO4 as the base, 25 mol% of diphenyl diselenide A as the catalyst, and dimethyl sulfoxide (DMSO) as the solvent at 60 °C for 4-6 h under an argon atmosphere.Under these conditions, the target triaryl phosphites 71a-l (12 compounds were obtained, with yields ranging from good to excellent (66-95%).The method was efficient for several EDGs (Me, t Bu, MeO, EtO, BnO, or MeS) bonded in the aromatic ring of phenol 15.Similar results were obtained for 1-naphthalenol, 2-naphthalenol, and 4 phenyl phenol; in these cases, the desired triaryl phosphites 71j, 71k, and 71h were obtained at yields of 71% (6 h), 76% (6 h), and 66% (6 h), respectively.Phenol, as well as the phenol substituted with an acetal group, was also used as a starting material, which produced compounds 71e and 71i at yields of 88% (6 h) and 78% (5 h), respectively (Scheme 75).
The proposed mechanism for the synthesis of triaryl phosphite 71 starts with the reaction of phenolates I (or a base

Conclusions
The expansive number of papers discussed in this review reflects the interest in th use of diorganyl diselenides as catalysts.As described here, a range of several organi compounds with molecular diversity and high complexity were prepared at good t excellent yields.Diselenide shows chemical versatility, as reported in relation to th mechanisms; sometimes, diselenide is combined with fluor compounds or other oxidants as well as LED irradiation and electrochemical conditions, among others.Interestingly some diselenides can promote regio-, diastereo-and enantioselective reactions highlighting the importance of their studies even more.Still, considerable efforts an improvements must be conducted in this field, targeting new catalysts based o diselenides allied with their new organic transformative applications.In this sense, w hope that this review encourages the synthetic chemistry community to develop furthe studies regarding the role of diselenide as a catalyst in these reactions by looking for proven mechanism, as well as new conditions to promote the reaction with hig efficiency.
Scheme 76.Proposed mechanism for the synthesis of triaryl phosphite 71.

Conclusions
The expansive number of papers discussed in this review reflects the interest in the use of diorganyl diselenides as catalysts.As described here, a range of several organic compounds with molecular diversity and high complexity were prepared at good to excellent yields.Diselenide shows chemical versatility, as reported in relation to the mechanisms; sometimes, diselenide is combined with fluor compounds or other oxidants, as well as LED irradiation and electrochemical conditions, among others.Interestingly, some diselenides can promote regio-, diastereo-and enantioselective reactions, highlighting the importance of their studies even more.Still, considerable efforts and improvements must be conducted in this field, targeting new catalysts based on diselenides allied with their new organic transformative applications.In this sense, we hope that this review encourages the synthetic chemistry community to develop further studies regarding the

Figure 1 .
Figure 1.Structure of a few selenium compounds.

Molecules 2023 , 55 Scheme 7 .
Scheme 7. Synthesis of 1,2-ditosyl imidazolidin-2-ones 12 [31].The proposed mechanism starts with the formation of the electrophilic arylselenium species I through the reaction of diselenide L with [TMPyF][BF4].Intermediate I reacts with alkene 11 to produce seleniranium ion intermediate II in a concerted step, which is opened by N,N′-bistosyl urea 10, yielding intermediate III.Another equivalent of [TMPyF][BF4] reacts with the intermediate III that was previously formed to give intermediate IV.Finally, intermediate IV suffers an intramolecular reaction to form target product 12 and regenerate electrophilic arylselenium I in a new cycle (Scheme 8).

Scheme 7 .
Scheme 7. Synthesis of 1,2-ditosyl imidazolidin-2-ones 12 [31].The proposed mechanism starts with the formation of the electrophilic arylselenium species I through the reaction of diselenide L with [TMPyF][BF 4 ].Intermediate I reacts with alkene 11 to produce seleniranium ion intermediate II in a concerted step, which is opened by N,N -bistosyl urea 10, yielding intermediate III.Another equivalent of [TMPyF][BF 4 ] reacts with the intermediate III that was previously formed to give intermediate IV.Finally, intermediate IV suffers an intramolecular reaction to form target product 12 and regenerate electrophilic arylselenium I in a new cycle (Scheme 8).

Scheme 25 .
Scheme 25.Selectivity in the synthesis of cyclic carbonate 24.

Scheme 27 .Scheme 27 . 55 Scheme 28 .
Scheme 27.Synthesis of oxazole 5[39].The plausible mechanism for the synthesis of 4-carbonylpyrrole 26 by seleniumcatalysed oxidative cyclisation starts with the formation of the π-acidic phenyl selenium cation I (PhSe + ) intermediate from the reaction of diphenyl diselenide A with the anode.Afterwards, intermediate I interacts with the starting material, N-propargyl enamine carboxylate 25, forming intermediate II, which, after the intramolecular nucleophilic addition of enamine in the active alkyne (5-exo-dig cyclisation), gives intermediate III (exocyclic vinyl selenoether).Intermediate III reacts with the anode to obtain the more stable seleno-intermediate IV.In the next step, intermediate IV reacts with the anode (oxidation), followed by the addition of water, leading to the formation of radical intermediate V, after a SET, afforded enol VI as well as the regeneration of PhSe + I (active catalyst) for a new reactional cycle.The formed Enol VI has its balance shifted to the formation of target product 26.The formation of oxazole 5 is similar to the mechanism described for 4-carbonylpyrrole 26 (Scheme 28).Scheme 27.Synthesis of oxazole 5 [39].The plausible mechanism for the synthesis of 4-carbonylpyrrole 26 by seleniumcatalysed oxidative cyclisation starts with the formation of the π-acidic phenyl selenium cation I (PhSe + ) intermediate from the reaction of diphenyl diselenide A with the anode.Afterwards, intermediate I interacts with the starting material, N-propargyl enamine carboxylate 25, forming intermediate II, which, after the intramolecular nucleophilic addition of enamine in the active alkyne (5-exo-dig cyclisation), gives intermediate III (exocyclic vinyl selenoether).Intermediate III reacts with the anode to obtain the more stable selenointermediate IV.In the next step, intermediate IV reacts with the anode (oxidation), followed by the addition of water, leading to the formation of radical intermediate V, after a SET, afforded enol VI as well as the regeneration of PhSe + I (active catalyst) for a new reactional cycle.The formed Enol VI has its balance shifted to the formation of target product 26.The formation of oxazole 5 is similar to the mechanism described for 4-carbonylpyrrole 26 (Scheme 28).Molecules 2023, 28, x FOR PEER REVIEW 22 of 55

Scheme 31 .
Scheme 31.Mechanism proposed for the synthesis of ynone 29.
Fluoroselenenylated intermediate III is generated after ring-opening, which is assisted by the nucleophilic attack of fluorine anions.The BnSe group on intermediate III is then oxidised by [TMFP][OTf], resulting in the production of intermediate IV.Next, a further H-elimination with the aid of a weak base generates the desirable product, 34, and regenerates the reactive species, BnSeF I, for a new cycle (Scheme 36).

Scheme 35 .Scheme 36 .Scheme 35 .Scheme 35 .
Scheme 35.Synthesis of compound 34 by oxidative allylic fluorination [40].The mechanism proposed by the authors begins with the oxidative cleavage of diselenide V, which releases the electrophilic species BnSeF I and BnSeOTf.Seleniranium ion II is formed when BnSeF I interacts with olefinic ester 33.Fluoroselenenylated intermediate III is generated after ring-opening, which is assisted by the nucleophilic attack of fluorine anions.The BnSe group on intermediate III is then oxidised by [TMFP][OTf], resulting in the production of intermediate IV.Next, a further Helimination with the aid of a weak base generates the desirable product, 34, and regenerates the reactive species, BnSeF I, for a new cycle (Scheme 36).

Scheme 36 .
Scheme 36.Mechanism proposed for the synthesis of compound 34.Scheme 36.Mechanism proposed for the synthesis of compound 34.

Scheme 41 .
Scheme 41.Mechanism proposed for the synthesis of compound 40 via the syn-dichlorination of alkene.

Scheme 49 .
Scheme 49.Proposed mechanism for the synthesis of quinone 48.

Scheme 49 .
Scheme 49.Proposed mechanism for the synthesis of quinone 48.

Scheme 49 .
Scheme 49.Proposed mechanism for the synthesis of quinone 48.

Scheme 51 .
Scheme 51.Proposed mechanism for the synthesis of carboxylic acid 50.

Scheme 50 .Scheme 50 .
Scheme 50.Synthesis of carboxylic acid 50 [46].In the first step of the mechanism, the oxidation of catalyst BB by H 2 O 2 generates seleninic acid I. Afterwards, H 2 O 2 oxidises seleninic acid I, promoting the formation of peroxyseleninic acid II, which reacts with aldehyde 49 and generates intermediate III.After the intramolecular rearrangement promoted by the H bond interaction of intermediate III, product 50 is released and seleninic acid I is renewed for the catalytic cycle (Scheme 51).

Scheme 51 .
Scheme 51.Proposed mechanism for the synthesis of carboxylic acid 50.

55 IV
Scheme 61.Proposed mechanism for the oxidation of organothiol 55 to diorganyl disulphide 56.
H 2 O 2 easily converts benzoin 59 to compound III in the presence of the diphenyl diselenide A catalyst.Oganoselenium intermediate IV is produced by the nucleophilic addition of II to a carbonyl group of III.Following a C-C bond cleavage reaction in intermediate IV, benzoic anhydride VI and benzeneseleninic acid V are produced.While the benzoic anhydride VI is hydrated and generates the desired product, 50, benzeneseleninic acid V is oxidised, promoting the regeneration of II of the catalytic cycle.Molecules 2023, 28, x FOR PEER REVIEW 45 of 55 2 P(O)−H 66 with compound I, which reacts with diselenide CA to produce R 2 P(O)−Se intermediate II, as well as forming arylselenol III.Subsequently, phosphoryl selenide intermediate II (previously formed) can undergo nucleophilic substitution with amines 53 or 62, alcohols, phenol 15, or thiophenol 55 to give the target products 67 (X = O), 68 (X = S), and 69 (X = NH) and a new equivalent of arylselenol III, which, in the presence of air, is reoxidised to regenerate the diaryl diselenide CA catalyst for a new cycle (Scheme 74).Molecules 2023, 28, x FOR PEER REVIEW 50 of 55 Scheme 74.Proposed mechanism for the functionalisation of hydrophosphoryl compounds.

5 Scheme 76 .
Scheme 75.Synthesis of triaryl phosphite 71[58].Molecules 2023, 28, x FOR PEER REVIEW 52 of 5 The proposed mechanism starts with the formation of the electrophilic arylselenium species I through the reaction of diselenide L with[TMPyF][BF4].Intermediate I reacts with alkene 11 to produce seleniranium ion intermediate II in a concerted step, which is opened by N,N′-bistosyl urea 10, yielding intermediate III.Another equivalent of [TMPyF][BF4] reacts with the intermediate III that was previously formed to give intermediate IV.Finally, intermediate IV suffers an intramolecular reaction to form target product 12 and regenerate electrophilic arylselenium I in a new cycle (Scheme 8).Mechanism proposed for the synthesis of 1,2-ditosyl imidazolidin-2-one 12.
, activating the carbonyl group of oxazole aldehyde 5 to perform an acetalisation reaction with alcohol 15 to form hemiacetal X. Hemiacetal X reacts with another Se-electrophile species, I, to form the intermediate XI, which, in the presence of alcohol 15, gives the desired product, 16 (ketal), and regenerates Se-electrophile species I to a new catalytic cycle (Scheme 12).
28lecules 2023,28, x FOR PEER REVIEW 10 of 55 The VI previously formed suffers a 1,5-hydrogen migration, yielding intermediate VII, which reacts with PhSe radical species IV to form oxazole aldehyde 5 Scheme 12. Mechanism proposed for the synthesis of oxazole acetal 16.In parallel, Se-electrophile species I can act as a Lewis acid (Se•••O interaction)

Scheme 14. Synthesis of compounds 18 [31]. Molecules 2023, 28, x FOR PEER REVIEW 13 of 55 Scheme 15. Regioselectivity of the compounds 18.
proposed by the authors starts with the cleavage of the Se-Se bond, forming the phenyl selenium radical II and cation III species.After that, there are two possible pathways.The first is anionic, in which the cation III intermediate is reacted with starting material 1 to obtain intermediate IV.Intermediate VII can be formed by the radical species of selenium compound II and starting material 1. Subsequently, intermediates IV or VII suffer a nucleophilic attack from acetonitrile 2 to give intermediate V, which can be hydrolysed to form intermediate VIII.Intermediate VIII is in equilibrium with the zwitterionic tautomer intermediate IX.Finally, the target oxazole 3 is formed by C-Se bond cleavage and deprotonation steps, forming the phenyl selenium anion X. Intermediate X undergoes anodic oxidation to regenerate electrophilic phenyl selenium species II and III for a new cycle (Scheme 23).
• C instead of r.t.(Scheme 22).The mechanism for the synthesis of target oxazole 3 °C instead of r.t.(Scheme 22).The mechanism for the synthesis of target oxazole 3 proposed by the authors starts with the cleavage of the Se-Se bond, forming the phenyl selenium radical II and cation III species.After that, there are two possible pathways.The first is anionic, in which the cation III intermediate is reacted with starting material 1 to obtain intermediate IV.Intermediate VII can be formed by the radical species of selenium compound II and starting material 1. Subsequently, intermediates IV or VII suffer a nucleophilic attack from acetonitrile 2 to give intermediate V, which can be hydrolysed to form intermediate VIII.Intermediate VIII is in equilibrium with the zwitterionic tautomer intermediate IX.Finally, the target oxazole 3 is formed by C-Se bond cleavage and deprotonation steps, forming the phenyl selenium anion X. Intermediate X undergoes anodic oxidation to regenerate electrophilic phenyl selenium species II and III for a new cycle (Scheme 23).
Scheme 23.Mechanism proposed for the synthesis of oxazole 3.
28 with intermediate I forms seleniranium ion II, which is attacked by the phosphonate group to give cyclic intermediate III.Intermediate III is in equilibrium with IV, which is attacked by H 2 O (in the presence of base) to form alcohol intermediate V. Next, alcohol V is oxidised to produce ketone intermediate VI, and cationic intermediate VII suffers an oxidative syn elimination of the selenium portion and hydrogen (through deselenenylation via C sp2 −Se bond cleavage) to form the desired ynone 29, and catalyst I is regenerated for a new cycle (Scheme 31).