Iodine(V)-Based Oxidants in Oxidation Reactions

The chemistry of hypervalent iodine reagents has now become quite valuable due to the reactivity of these compounds under mild reaction conditions and their resemblance in chemical properties to transition metals. The environmentally friendly nature of these reagents makes them suitable for Green Chemistry. Reagents with a dual nature, such as iodine(III) reagents, are capable electrophiles, while iodine(V) reagents are known for their strong oxidant behavior. Various iodine(V) reagents including IBX and DMP have been used as oxidants in organic synthesis either in stoichiometric or in catalytic amounts. In this review article, we describe various oxidation reactions induced by iodine(V) reagents reported in the past decade.

In recent years, the chemistry of hypervalent iodine(V) compounds has witnessed considerable growth in comparison to that of trivalent iodine reagents, as reviewed by Zhdankin in 2006 [43] and 2011 [44]. Some examples of common hypervalent iodine(V) reagents are presented in Figure 1. The most versatile hypervalent iodine(V) reagent is o-iodoxybenzoic acid (IBX 1), first synthesized by Hartmann and Meyer in 1893 [45]. Later, Mullins's research group synthesized IBX 1 through the oxidation of 2-iodobenzoic acid using potassium bromate under acidic conditions [46]. However, the presence of bromate impurities imparted an explosive nature to IBX 1 under excessive heating conditions. In addition, the practical use of IBX 1 as a potential oxidant was overlooked for many years due to its poor solubility in most organic solvents except DMSO. Nevertheless, IBX has received renewed attention after the pioneering work by Santagostino et al. regarding its improved synthesis t from 2-iodobenzoic acid in the presence of oxone in an aqueous medium [47]. Since then, IBX 1 has become the main representative of hypervalent iodine chemistry owing to its unique reactivity and excellent oxidizing properties. The numerous  In order to solve solubility issues, several analogs of IBX were prepared by functionalizing its aromatic core. Dess and Martin synthesized the stable, non-explosive bis(trifluoromethyl)benziodoxole oxide 2 having good solubility in many organic solvents [49]. Later, the water-soluble modified IBX (mIBX) 3 and 4 were prepared from terephthalic acid by Thottumkara and Vinod for the oxidation of benzylic and allylic alcohols [50,51]. Furthermore, Moorthy and co-workers designed and synthesized the orthomethyl-substituted IBX (Me-IBX, 5) that oxidizes alcohols in common organic solvents [52]. Then, Wirth and co-workers introduced a novel tetrafluorinated IBX analogue (FIBX 6), which has higher solubility and reactivity than IBX 1 [53]. Zhdankin's group prepared 2iodobenzenesulfonic acid (IBS 7) from 2-iodobenzenesulfonic acid using Oxone in aqueous solution [54]. This thia-IBX 7 was eventually used by Ishihara and co-workers for the oxidation of alcohols [55]. Another interesting iodine(V) reagent is Dess-Martin periodinane (DMP 8), mainly used for the oxidation of primary alcohols to aldehydes and secondary alcohols to ketones [56,57]. Among acyclic iodine(V) reagents, iodylbenzene 9 is the most explored and is well suited for the oxidation of phenols, sulfides and alcohols [43,44]. Recently, Motlagh and Zakavi synthesized, characterized and studied the oxidizing strength of iodylbenzene nanofibers for the oxidation of 1,5-dihydroxynaphthalene to juglone [58]. Besides this, pseudocyclic iodine(V) compounds 10 are also important oxidants having the characteristic of establishing intramolecular secondary I---O bonding interactions between the iodine center and the oxygen atom in the ortho substituent [59,60]. The present review article summarizes the recent advances in oxidative transformation reactions such as the oxidation of alcohols, amines, amides, aromatic compounds and oxidative cyclizations using hypervalent iodine(V) reagents. Moreover, recent developments achieved in the design of catalytic systems based on in situ generated hypervalent iodine(V) reagents from corresponding iodoarenes will be discussed in great detail.

Oxidation of Alcohols
Carbonyl compounds (aldehydes, ketones, carboxylic acids, esters, amides, lactones, etc., are versatile building blocks in organic chemistry [61,62]. The oxidation of alcohols to the corresponding carbonyl compounds have been well explored using hypervalent iodine(V) reagents as stoichiometric oxidants [43,44]. The explosive nature and low solubility of IBX in organic solvents stimulated researchers to develop catalytic routes involving the in situ generation of hypervalent iodine(V) species from organoiodo compounds in the presence of a suitable co-oxidant. Within this context, in 2005, Thottumkara et al. successfully achieved the catalytic oxidations of alcohols by generating iodine(V) species in situ from o-iodobenzoic acid in the presence of Oxone as an oxidant in the solution state [63]. Later in 2009, Ishihara et al. employed o-iodobenzenesulfonate (IBS) 7 as a catalyst to produce iodine(V) species for the oxidation of alcohols to the corresponding carbonyl compounds in good yields [55]. Furthermore, Moorthy's research group accomplished significant achievements in the catalytic oxidation of alcohols using different iodoarenes as precatalysts. Initially, they employed 3,4,5,6-tetramethyl-2-iodobenzoic acid (TetMe-IA) 12 as an iodo-acid precursor for the in situ generation of reactive TetMe-IBX that facilitated the oxidation of alcohols 11 to carbonyl compounds 15 at room temperature (Scheme 1) [64]. Notably, primary alcohols 11 were oxidized to carboxylic acids 16 through the oxidation of initially formed aldehydes by Oxone. Further catalytic oxidation of a variety of diols to the corresponding lactones was achieved using TetMe-IA 12 as a precursor of TetMe-IBX [64].
Carbonyl compounds (aldehydes, ketones, carboxylic acids, esters, amides, lactones, etc., are versatile building blocks in organic chemistry [61,62]. The oxidation of alcohols to the corresponding carbonyl compounds have been well explored using hypervalent iodine(V) reagents as stoichiometric oxidants [43,44]. The explosive nature and low solubility of IBX in organic solvents stimulated researchers to develop catalytic routes involving the in situ generation of hypervalent iodine(V) species from organoiodo compounds in the presence of a suitable co-oxidant. Within this context, in 2005, Thottumkara et al. successfully achieved the catalytic oxidations of alcohols by generating iodine(V) species in situ from o-iodobenzoic acid in the presence of Oxone as an oxidant in the solution state [63]. Later in 2009, Ishihara et al. employed o-iodobenzenesulfonate (IBS) 7 as a catalyst to produce iodine(V) species for the oxidation of alcohols to the corresponding carbonyl compounds in good yields [55]. Furthermore, Moorthy's research group accomplished significant achievements in the catalytic oxidation of alcohols using different iodoarenes as precatalysts. Initially, they employed 3,4,5,6-tetramethyl-2-iodobenzoic acid (TetMe-IA) 12 as an iodo-acid precursor for the in situ generation of reactive Tet-Me-IBX that facilitated the oxidation of alcohols 11 to carbonyl compounds 15 at room temperature (Scheme 1) [64]. Notably, primary alcohols 11 were oxidized to carboxylic acids 16 through the oxidation of initially formed aldehydes by Oxone. Further catalytic oxidation of a variety of diols to the corresponding lactones was achieved using TetMe-IA 12 as a precursor of TetMe-IBX [64].
Later, the same group generated the Bis-IBX catalyst in situ from twisted 3,3 -diiodo-2,2 ,6,6 -tetramethoxybiphenyl-4,4 -dicarboxylic acid (DIDA) 13 for the catalytic oxidation of alcohols 11 [65]. Furthermore, Mishra and Moorthy recently designed and synthesized a catalyst, 3,5-di-tert-butyl-2-iodobenzoic acid (DTB-IA) 14, for the in situ generation of IBX 1 using Oxone as a terminal oxidant (Scheme 1) [66]. The highly reactive DTB-IA 14 was then used to oxidize a variety of primary, secondary, aliphatic and aromatic alcohols 11 in solid state under ball-milling conditions. The reaction mechanism for the oxidation of alcohols 11 to carbonyl compounds 15 using the precatalysts 12-14 in the presence of Oxone is depicted in Scheme 2. The reaction proceeds with the in situ oxidation of iodarene 14 to the iodine(V) intermediate [ Meanwhile, Ballaschk and Kirsch performed the oxidation of secondary alcohols 11 to produce ketones 15 using the inexpensive and recyclable solid-supported hypervalent iodine catalysts 17 and 18 in the presence of stoichiometric amounts of Oxone ® (Scheme 3) [67]. In this, the hypervalent iodine precursor was connected by stable amide bonds to the aminoethyl polystyrene resin. The catalysts were easily regenerated by simple filtration, and the activity lasted for five rounds. Both IBX-derived (Method A) and IBS-derived (Method B) catalytic systems yielded a variety of structurally diverse carbonyl compounds 15 in good to excellent yields. n Bu4NHSO4 was used as phase transfer catalyst in non-aqueous conditions (method B). Notably, the IBS-derived catalyst 18 was found to be more active and provided higher product yields compared to 17. Secondary alcohols which were sterically hindered provided better yields when method B was used. Meanwhile, Ballaschk and Kirsch performed the oxidation of secondary alcohols 11 to produce ketones 15 using the inexpensive and recyclable solid-supported hypervalent iodine catalysts 17 and 18 in the presence of stoichiometric amounts of Oxone ® (Scheme 3) [67]. In this, the hypervalent iodine precursor was connected by stable amide bonds to the aminoethyl polystyrene resin. The catalysts were easily regenerated by simple filtration, and the activity lasted for five rounds. Both IBX-derived (Method A) and IBS-derived (Method B) catalytic systems yielded a variety of structurally diverse carbonyl compounds 15 in good to excellent yields. n Bu 4 NHSO 4 was used as phase transfer catalyst in non-aqueous conditions (method B). Notably, the IBS-derived catalyst 18 was found to be more active and provided higher product yields compared to 17. Secondary alcohols which were sterically hindered provided better yields when method B was used.
In 2021, Kupwade et al. worked towards synthesizing α-ketophosphonates 20 by oxidizing α-hydroxyphosphonates 19 in the absence of metal catalysts (Scheme 4) [68]. Usually, o-iodoxybezoic acid 1 (IBX) is used for the oxidation of alcohols. However, it was found to be inefficient for the oxidation of such compounds. Later, IBX 1 in combination with benzyltriphenylphosphonium peroxymonosulfate (BTPP) in the ratio of 1:3 was used, and this resulted in excellent yields. The major limitation for this technique was the high molecular weight, cost and reflux conditions of BTPP. Hence, Dess-Martin periodinane (DMP) 8 and 19 in the ratio of 1:1 were stirred together for a very short time, resulting in the desired products 20 under ambient conditions. The reagent when tested with several α-hydroxyphosphonates 19 substituted with electron-donating and -withdrawing groups furnished 20 in 91-98% yield. Notably, α-ketophosphonates exhibits interesting biological activities [69,70] and are versatile molecules in organic synthesis [71].

Oxidation of Amines
The oxidation of amines using hypervalent iodine reagents has attracted great attention in recent years [72][73][74]. Recent accomplishments achieved in this area using iodine (V) reagents are reported in this section. In 2015, Orru and co-workers for the first time reported the oxidation of unactivated amines 21 to the corresponding imines 22 using IBX 1 as an oxidant (Scheme 5) [75]. Delightedly, a number of aliphatic meso-pyrrolidines 21 were oxidized selectively by IBX 1 to furnish bi-and tricyclic 1-pyrrolines 22 in 70-97% yield. Furthermore, a one-pot Ugi-type three-component reaction between meso-pyrrolidines 21, carboxylic acids 23 and isocyanides 24 produced dipeptides 25 as a single diastereoisomer in moderate to good yields (41-61%). The molecular diversity of in situ-generated 1-pyrrolines 22 was further explored through the oxi- In 2021, Kupwade et al. worked towards synthesizing α-ketophosphonates 20 by oxidizing α-hydroxyphosphonates 19 in the absence of metal catalysts (Scheme 4) [68]. Usually, o-iodoxybezoic acid 1 (IBX) is used for the oxidation of alcohols. However, it was found to be inefficient for the oxidation of such compounds. Later, IBX 1 in combination with benzyltriphenylphosphonium peroxymonosulfate (BTPP) in the ratio of 1:3 was used, and this resulted in excellent yields. The major limitation for this technique was the high molecular weight, cost and reflux conditions of BTPP. Hence, Dess-Martin periodinane (DMP) 8 and 19 in the ratio of 1:1 were stirred together for a very short time, resulting in the desired products 20 under ambient conditions. The reagent when tested with several α-hydroxyphosphonates 19 substituted with electron-donating and -withdrawing groups furnished 20 in 91-98% yield. Notably, α-ketophosphonates exhibits interesting biological activities [69,70] and are versatile molecules in organic synthesis [71].  [68]. Usually, o-iodoxybezoic acid 1 (IBX) is used for the oxidation of alcohols. However, it was found to be inefficient for the oxidation of such compounds. Later, IBX 1 in combination with benzyltriphenylphosphonium peroxymonosulfate (BTPP) in the ratio of 1:3 was used, and this resulted in excellent yields. The major limitation for this technique was the high molecular weight, cost and reflux conditions of BTPP. Hence, Dess-Martin periodinane (DMP) 8 and 19 in the ratio of 1:1 were stirred together for a very short time, resulting in the desired products 20 under ambient conditions. The reagent when tested with several α-hydroxyphosphonates 19 substituted with electron-donating and -withdrawing groups furnished 20 in 91-98% yield. Notably, α-ketophosphonates exhibits interesting biological activities [69,70] and are versatile molecules in organic synthesis [71].

Oxidation of Amines
The oxidation of amines using hypervalent iodine reagents has attracted great attention in recent years [72][73][74]. Recent accomplishments achieved in this area using iodine (V) reagents are reported in this section. In 2015, Orru and co-workers for the first time reported the oxidation of unactivated amines 21 to the corresponding imines 22 using IBX 1 as an oxidant (Scheme 5) [75]. Delightedly, a number of aliphatic meso-pyrrolidines 21 were oxidized selectively by IBX 1 to furnish bi-and tricyclic 1-pyrrolines 22 in 70-97% yield. Furthermore, a one-pot Ugi-type three-component reaction between meso-pyrrolidines 21, carboxylic acids 23 and isocyanides 24 produced dipeptides 25 as a single diastereoisomer in moderate to good yields (41-61%). The molecular diversity of in situ-generated 1-pyrrolines 22 was further explored through the oxi-

Oxidation of Amines
The oxidation of amines using hypervalent iodine reagents has attracted great attention in recent years [72][73][74]. Recent accomplishments achieved in this area using iodine (V) reagents are reported in this section. In 2015, Orru and co-workers for the first time reported the oxidation of unactivated amines 21 to the corresponding imines 22 using IBX 1 as an oxidant (Scheme 5) [75]. Delightedly, a number of aliphatic meso-pyrrolidines 21 were oxidized selectively by IBX 1 to furnish bi-and tricyclic 1-pyrrolines 22 in 70-97% yield. Furthermore, a one-pot Ugi-type three-component reaction between meso-pyrrolidines 21, carboxylic acids 23 and isocyanides 24 produced dipeptides 25 as a single diastereoisomer in moderate to good yields (41-61%). The molecular diversity of in situ-generated 1pyrrolines 22 was further explored through the oxidative aza-Friedel-Crafts reaction of meso-pyrrolidines 21 with pyrrole and indoles, providing 2-substituted pyrrolidines 26 in useful yields.  [76]. Notably, the reacti two equivalents of IBX 1 yielded quinazolines 29, while one equivalent of IBX 1 p dihydroquinazolines 30. This strategy was found effective for a number of a eroaryl and alkyl aldehydes and also tolerated both electron-donating and -withd functional groups.  [76]. Notably, the reaction with two equivalents of IBX 1 yielded quinazolines 29, while one equivalent of IBX 1 provided dihydroquinazolines 30. This strategy was found effective for a number of aryl, heteroaryl and alkyl aldehydes and also tolerated both electron-donating and -withdrawing functional groups.
A plausible mechanism envisioned for the synthesis of quinazolines 29 and 3,4-dihydroquinazolines 30 is depicted in Scheme 7 [76]. Initially In 2019, Singh et al. reported a methodology to selectively oxidize the primary amines 34 to the corresponding imines 35 using IBX 1 as an oxidant (Scheme 8) [77]. It was found that for oxidative coupling, IBX 1 and DMP 8 were highly selective. Due to the high solubility of IBX 1 in the deep eutectic solvent choline chloride/urea (ChCl/urea), this solvent is used as solvent system for this reaction. A number of electron-rich and electron-deficient amines were readily converted into secondary imines in good yields. Notably, IBX 1 and the solvent could be recovered and reused up to five times without loss of much activity. Further, a one-pot three-component Ugi reaction involving the condensation of diverse carboxylic acids 23 and primary amines 34 was carried out to form the imine intermediate 35 followed by a reaction with an isocyanide 36 to yield bis(amide)s 37 in high yields. A plausible mechanism envisioned for the synthesis of quinazolines 29 and 3,4-dihydroquinazolines 30 is depicted in Scheme 7 [76]. Initially A plausible mechanism envisioned for the synthesis of quinazolines 29 and 3,4-dihydroquinazolines 30 is depicted in Scheme 7 [76]. Initially In 2019, Singh et al. reported a methodology to selectively oxidize the primary amines 34 to the corresponding imines 35 using IBX 1 as an oxidant (Scheme 8) [77]. It was found that for oxidative coupling, IBX 1 and DMP 8 were highly selective. Due to the high solubility of IBX 1 in the deep eutectic solvent choline chloride/urea (ChCl/urea), this solvent is used as solvent system for this reaction. A number of electron-rich and tetrahydroisoquinolines to obtain imino-carboxamides 39 under metal-free conditions (Scheme 9) [78]. The dual role of IBX 1 as an oxidant and as a Lewis acid to activate an imine facilitates the isocyanide addition in this transformation. A variety of aliphatic and aromatic isocyanides 36 reacted well with 38 to afford products 39 in good to moderate yields. However, the reactions with unactivated secondary amines such as pyrrolidine, piperidine, epoxyisoindoline and indoline were sluggish due to the formation of a complex mixture of products. Furthermore, this method was successfully employed for the gram-scale preparation of two alkaloids, alangiobussine (63%) and alangiobussinine (45%). In 2019, Ambule et al. reported a pioneering work on the IBX-mediated oxidative addition of isocyanides 36 to the cyclic amines 38 such as tryptolines and 1,2,3,4-tetrahydroisoquinolines to obtain imino-carboxamides 39 under metal-free conditions (Scheme 9) [78]. The dual role of IBX 1 as an oxidant and as a Lewis acid to activate an imine facilitates the isocyanide addition in this transformation. A variety of aliphatic and aromatic isocyanides 36 reacted well with 38 to afford products 39 in good to moderate yields. However, the reactions with unactivated secondary amines such as pyrrolidine, piperidine, epoxyisoindoline and indoline were sluggish due to the formation of a complex mixture of products. Furthermore, this method was successfully employed for the gram-scale preparation of two alkaloids, alangiobussine (63%) and alangiobussinine (45%).

Scheme 9.
Oxidative addition of isocyanides 36 to the cyclic amines 38 to yield imino-carboxamides 39 using IBX 1 as an oxidant.
A proposed mechanistic pathway for this reaction is displayed in Scheme 10 [78]. Initially, IBX oxidizes tryptoline 38 to 3,4-dihydro-β-carboline 41, followed by the imine In 2019, Ambule et al. reported a pioneering work on the IBX-mediated oxidative addition of isocyanides 36 to the cyclic amines 38 such as tryptolines and 1,2,3,4-tetrahydroisoquinolines to obtain imino-carboxamides 39 under metal-free conditions (Scheme 9) [78]. The dual role of IBX 1 as an oxidant and as a Lewis acid to activate an imine facilitates the isocyanide addition in this transformation. A variety of aliphatic and aromatic isocyanides 36 reacted well with 38 to afford products 39 in good to moderate yields. However, the reactions with unactivated secondary amines such as pyrrolidine, piperidine, epoxyisoindoline and indoline were sluggish due to the formation of a complex mixture of products. Furthermore, this method was successfully employed for the gram-scale preparation of two alkaloids, alangiobussine (63%) and alangiobussinine (45%).
A proposed mechanistic pathway for this reaction is displayed in Scheme 10 [78]. Initially, IBX oxidizes tryptoline 38 to 3,4-dihydro-β-carboline 41, followed by the imine activation with another molecule of IBX 1 or IBA 40 to yield the intermediate 42.

Oxidative Cleavage of Amides
Another interesting area of great interest is the oxidation of amides using hypervalent iodine(V) reagents. In 2018, Zhang et al. demonstrated an excellent method for the oxidative cleavage of inert aryl C−N bonds in N-aryl amides 46 to yield primary amides 48 using IBX 1 as an oxidant (Scheme 11) [79]. Among the different solvent systems screened, HFIP/H2O was found to be very efficient for these reactions. The plausible mechanism involves the interaction of IBX with substrates 46 to form the annular π-complex 47, which is subsequently attacked by the hydroxy group obtained from H2O to provide the primary amide 48 via a regioselective cleavage of the C(aryl)−N bond. Notably, substrates with electron-donating groups yielded products in good yields, whereas those with electron-withdrawing groups failed to provide the desired products.
The key aspect of this method is that IBX enables the selective cleavage of the C(aryl)−N bond in N-aryl amides, keeping the C(carbonyl)−N bond untouched. Furthermore, this novel strategy was extended to a number of α-mono-and α,α-disubstituted β-ketoamides 46 to yield the anticipated amides 48 in useful yields. Scheme 10. The proposed mechanism for the synthesis of imino-carboxamides 39 using IBX 1 as an oxidant.

Oxidative Cleavage of Amides
Another interesting area of great interest is the oxidation of amides using hypervalent iodine(V) reagents. In 2018, Zhang et al. demonstrated an excellent method for the oxidative cleavage of inert aryl C−N bonds in N-aryl amides 46 to yield primary amides 48 using IBX 1 as an oxidant (Scheme 11) [79]. Among the different solvent systems screened, HFIP/H 2 O was found to be very efficient for these reactions. The plausible mechanism involves the interaction of IBX with substrates 46 to form the annular π-complex 47, which is subsequently attacked by the hydroxy group obtained from H 2 O to provide the primary amide 48 via a regioselective cleavage of the C(aryl)−N bond. Notably, substrates with electron-donating groups yielded products in good yields, whereas those with electronwithdrawing groups failed to provide the desired products. The key aspect of this method is that IBX enables the selective cleavage of the C(aryl)−N bond in N-aryl amides, keeping the C(carbonyl)−N bond untouched. Furthermore, this novel strategy was extended to a number of α-mono-and α,α-disubstituted β-ketoamides 46 to yield the anticipated amides 48 in useful yields.
The same group reported a chemoselective method for the oxidative cleavage of 8aminoquinoline (AQ) in N-quinolyl carboxamides 49 and the removal of the AQ group using IBX 1 as a stoichiometric oxidant (Method A) (Scheme 12) [80]. The reaction scope was evaluated with a variety of AQ-coupled substrates, and the corresponding primary amide products 50 were obtained in moderate to good yields. The mixture of HFIP and H 2 O solvents in a 1:1 ratio was critical for obtaining high yields of products. An additional catalytic system (Method B) comprising 2-iodobenzoic acid 40 (0.3 equiv.) and Oxone (a mixture of 2KHSO 5 ·KHSO 4 ·K 2 SO 4 ) as a co-oxidant successfully furnished products 50 in comparable amounts to those obtained with method A. Notably, the reactions exhibited excellent chemoselectivity towards the C-terminal N-quinolyl carboxamide, without affecting the internal alkyl amide groups. Finally, the resulting primary amides 50 were easily converted into carboxylic acids by treating with tert-butyl nitrite in AcOH.
x FOR PEER REVIEW 10 of 28 Scheme 11. Oxidative cleavage of aryl C−N bonds in N-aryl amides 46 to yield primary amides 48 using IBX 1 as an oxidant.
The same group reported a chemoselective method for the oxidative cleavage of 8-aminoquinoline (AQ) in N-quinolyl carboxamides 49 and the removal of the AQ group using IBX 1 as a stoichiometric oxidant (Method A) (Scheme 12) [80]. The reaction scope was evaluated with a variety of AQ-coupled substrates, and the corresponding primary amide products 50 were obtained in moderate to good yields. The mixture of HFIP and H2O solvents in a 1:1 ratio was critical for obtaining high yields of products. An additional catalytic system (Method B) comprising 2-iodobenzoic acid 40 (0.3 equiv.) and Oxone (a mixture of 2KHSO5·KHSO4·K2SO4) as a co-oxidant successfully furnished products 50 in comparable amounts to those obtained with method A. Notably, the reactions exhibited excellent chemoselectivity towards the C-terminal N-quinolyl carboxamide, without affecting the internal alkyl amide groups. Finally, the resulting primary amides 50 were easily converted into carboxylic acids by treating with tert-butyl nitrite in AcOH.

Scheme 12.
Oxidative cleavage of 8-aminoquinoline in N-quinolyl carboxamides 49 to yield primary amides 50 using IBX 1 as an oxidant. The same group reported a chemoselective method for the oxidative cleavage of 8-aminoquinoline (AQ) in N-quinolyl carboxamides 49 and the removal of the AQ group using IBX 1 as a stoichiometric oxidant (Method A) (Scheme 12) [80]. The reaction scope was evaluated with a variety of AQ-coupled substrates, and the corresponding primary amide products 50 were obtained in moderate to good yields. The mixture of HFIP and H2O solvents in a 1:1 ratio was critical for obtaining high yields of products. An additional catalytic system (Method B) comprising 2-iodobenzoic acid 40 (0.3 equiv.) and Oxone (a mixture of 2KHSO5·KHSO4·K2SO4) as a co-oxidant successfully furnished products 50 in comparable amounts to those obtained with method A. Notably, the reactions exhibited excellent chemoselectivity towards the C-terminal N-quinolyl carboxamide, without affecting the internal alkyl amide groups. Finally, the resulting primary amides 50 were easily converted into carboxylic acids by treating with tert-butyl nitrite in AcOH.

Oxidation of Alkenes
The selective oxidation of alkenes to more polar compounds using hypervalent iodine reagents is yet another interesting area of research. In 2014, Moorthy's research group demonstrated the oxidative cleavage of alkenes 51 or 52 into ketones 54/carboxylic acids 53 using a catalytic amount of TetMe-IA 12 in the presence of Oxone (Scheme 13) [81]. Mechanistically, the reaction proceeds via the initial dihydroxylation of alkenes followed by oxidative cleavage by the in situ generated TetMe-IBX to aldehydes, which undergo a rapid oxidation with Oxone to produce the corresponding acids 53. The reaction was carried out with a variety of terminal and internal alkenes, and the desired products were obtained in respectable yields. Notably, for substrates containing two double bonds, chemoselective cleavage of electron-rich alkenes was observed.

Oxidation of Alkenes
The selective oxidation of alkenes to more polar compounds using hypervalent iodine reagents is yet another interesting area of research. In 2014, Moorthy's research group demonstrated the oxidative cleavage of alkenes 51 or 52 into ketones 54/carboxylic acids 53 using a catalytic amount of TetMe-IA 12 in the presence of Oxone (Scheme 13) [81]. Mechanistically, the reaction proceeds via the initial dihydroxylation of alkenes followed by oxidative cleavage by the in situ generated TetMe-IBX to aldehydes, which undergo a rapid oxidation with Oxone to produce the corresponding acids 53. The reaction was carried out with a variety of terminal and internal alkenes, and the desired products were obtained in respectable yields. Notably, for substrates containing two double bonds, chemoselective cleavage of electron-rich alkenes was observed. Chaudhari and Fernandes reported the palladium-catalyzed Wacker-type oxidation of terminal alkenes 56 using Dess-Martin periodinane (DMP) 8 as an oxidant (Scheme 14) [82]. This operationally simple method enabled the synthesis of diverse methyl ketones 57 in good yields with complete Markonikov selectivity. Additionally, allylic or homoallylic compounds 58 were oxidized to methyl ketones 57 under similar conditions. The key features of this reaction are its broad substrates scope, excellent functional group tolerance and high yields.

Oxidation of Aromatic Compounds
The hypervalent iodine-mediated oxidation of aromatic compounds has been well studied by several researchers. In 2006, Moorthy and co-workers reported a one-pot oxidation of stilbene derivatives to the corresponding benzils with NIS/IBX in DMSO [83]. In continuation, Moorthy's research group demonstrated a method for the direct oxidation of indoles 59 to isatins 60 using the NIS/IBX 1 reagent in DMSO at room temperature (Scheme 15) [84]. The reactions of a variety of substituted indoles 59 proceeded smoothly under the optimized conditions, providing isatins 60 in good yields. Notably, the reaction proceeds through the formation of the intermediary 3-iodoindole 61, which is oxidized by IBX 1 to produce isatins 60. Furthermore, 3-iodoindoles 61 were synthesized independently by reacting indoles 59 with NIS and efficiently converted into isatins 60 with Chaudhari and Fernandes reported the palladium-catalyzed Wacker-type oxidation of terminal alkenes 56 using Dess-Martin periodinane (DMP) 8 as an oxidant (Scheme 14) [82]. This operationally simple method enabled the synthesis of diverse methyl ketones 57 in good yields with complete Markonikov selectivity. Additionally, allylic or homoallylic compounds 58 were oxidized to methyl ketones 57 under similar conditions. The key features of this reaction are its broad substrates scope, excellent functional group tolerance and high yields.

Oxidation of Aromatic Compounds
The hypervalent iodine-mediated oxidation of aromatic compounds has been well studied by several researchers. In 2006, Moorthy and co-workers reported a one-pot oxidation of stilbene derivatives to the corresponding benzils with NIS/IBX in DMSO [83]. In continuation, Moorthy's research group demonstrated a method for the direct oxidation of indoles 59 to isatins 60 using the NIS/IBX 1 reagent in DMSO at room temperature (Scheme 15) [84]. The reactions of a variety of substituted indoles 59 proceeded smoothly under the optimized conditions, providing isatins 60 in good yields. Notably, the reaction proceeds through the formation of the intermediary 3-iodoindole 61, which is oxidized by IBX 1 to produce isatins 60. Furthermore, 3-iodoindoles 61 were synthesized independently by reacting indoles 59 with NIS and efficiently converted into isatins 60 with

Oxidation of Aromatic Compounds
The hypervalent iodine-mediated oxidation of aromatic compounds has been well studied by several researchers. In 2006, Moorthy and co-workers reported a one-pot oxidation of stilbene derivatives to the corresponding benzils with NIS/IBX in DMSO [83]. In continuation, Moorthy's research group demonstrated a method for the direct oxidation of indoles 59 to isatins 60 using the NIS/IBX 1 reagent in DMSO at room temperature (Scheme 15) [84]. The reactions of a variety of substituted indoles 59 proceeded smoothly under the optimized conditions, providing isatins 60 in good yields. Notably, the reaction proceeds through the formation of the intermediary 3-iodoindole 61, which is oxidized by IBX 1 to produce isatins 60. Furthermore, 3-iodoindoles 61 were synthesized independently by reacting indoles 59 with NIS and efficiently converted into isatins 60 with IBX 1. A similar method was developed for the synthesis of isatins by Kirsch and others using a NaI/IBX-SO 3 K reagent mixture [85]. The oxidation of the K-region (4,5,9,10 position) in pyrene 62 is found to be very difficult, as most of the oxidants produce very less yields (Scheme 16). El-Assaad et al. reported a new method for this reaction, using an hypervalent iodine compound, in 2020 [86]. They performed the oxidation of pyrene 62 by employing IBX 1 as an oxidizing agent in acetic acid. A mixture of diones 63-66 was obtained, and pseudo-para-diones were found to be the major product (diones 65a and 64b). The oxidation of the K-region (4,5,9,10 position) in pyrene 62 is found to be very difficult, as most of the oxidants produce very less yields (Scheme 16). El-Assaad et al. reported a new method for this reaction, using an hypervalent iodine compound, in 2020 [86]. They performed the oxidation of pyrene 62 by employing IBX 1 as an oxidizing agent in acetic acid. A mixture of diones 63-66 was obtained, and pseudo-para-diones were found to be the major product (diones 65a and 64b).
x FOR PEER REVIEW 12 of 28 IBX 1. A similar method was developed for the synthesis of isatins by Kirsch and others using a NaI/IBX-SO3K reagent mixture [85]. The oxidation of the K-region (4,5,9,10 position) in pyrene 62 is found to be very difficult, as most of the oxidants produce very less yields (Scheme 16). El-Assaad et al. reported a new method for this reaction, using an hypervalent iodine compound, in 2020 [86]. They performed the oxidation of pyrene 62 by employing IBX 1 as an oxidizing agent in acetic acid. A mixture of diones 63-66 was obtained, and pseudo-para-diones were found to be the major product (diones 65a and 64b). In continuation, Nencioni, Saladino and co-workers eventually reported the IBXmediated oxidation of coumarins 72 in DMSO for the regioselective synthesis of catechols 73 (Scheme 18) [88]. Additionally, the synthesis of pyrogallol derivatives 75 was achieved through the oxidation of fraxetin and esculetin 74 under similar conditions, in good yields. Notably, the regioselectivity observed in this transformation is due to the intramolecular delivery of the oxygen atom from the λ 5 -iodanyl intermediate 74 to the ortho-position of the phenolic moiety. Moreover, the oxidation of coumarins was also achieved by replacing IBX 1 with polystyrene-supported IBX in the presence of water as a solvent. Finally, the synthesized coumarin derivatives were tested for antioxidant and antiviral activities, and the corresponding pyrogallols 75 were found to be the most active compounds. In continuation, Nencioni, Saladino and co-workers eventually reported the IBX-mediated oxidation of coumarins 72 in DMSO for the regioselective synthesis of catechols 73 (Scheme 18) [88]. Additionally, the synthesis of pyrogallol derivatives 75 was achieved through the oxidation of fraxetin and esculetin 74 under similar conditions, in good yields. Notably, the regioselectivity observed in this transformation is due to the intramolecular delivery of the oxygen atom from the λ 5 -iodanyl intermediate 74 to the ortho-position of the phenolic moiety. Moreover, the oxidation of coumarins was also achieved by replacing IBX 1 with polystyrene-supported IBX in the presence of water as a solvent. Finally, the synthesized coumarin derivatives were tested for antioxidant and antiviral activities, and the corresponding pyrogallols 75 were found to be the most active compounds.

C−H Functionalization Reactions
The C−H functionalization of organic compounds has emerged as a powerful tool to access biologically and pharmaceutically important molecules. The use of hypervalent iodine(V) reagents in C−H functionalization reactions is well studied, and the recent advancements in this area will be discussed in this section. In 2012, Klahn and others reported an operationally simple method for the azidation of 1,3-dicarbonyl compounds 76 using NaN 3 as an azide source (Scheme 19) [89]. The reaction proceeds in the presence of 2-iodoxybenzoic acid (IBX)-SO 3 K 77/NaI as an oxidant. The present azidation protocol exhibited a broad substrates scope and tolerated a multitude of functional groups. Furthermore, 1,3-dicarbonyl compounds 76 with no substituent at the 2 position (R 2 = H) smoothly underwent a novel double azidation reaction to furnish 2,2-bisazido-1,3-dicarbonyl compounds 79 in good yields under slightly modified conditions. Moreover, the azidation of two natural products, β-estradiol and strychnine, was achieved under these conditions in useful yields.

C−H Functionalization Reactions
The C−H functionalization of organic compounds has emerged as a powerful tool to access biologically and pharmaceutically important molecules. The use of hypervalent iodine(V) reagents in C−H functionalization reactions is well studied, and the recent advancements in this area will be discussed in this section. In 2012, Klahn and others reported an operationally simple method for the azidation of 1,3-dicarbonyl compounds 76 using NaN3 as an azide source (Scheme 19) [89]. The reaction proceeds in the presence of 2-iodoxybenzoic acid (IBX)-SO3K 77/NaI as an oxidant. The present azidation protocol exhibited a broad substrates scope and tolerated a multitude of functional groups. Furthermore, 1,3-dicarbonyl compounds 76 with no substituent at the 2 position (R 2 = H) smoothly underwent a novel double azidation reaction to furnish 2,2-bisazido-1,3-dicarbonyl compounds 79 in good yields under slightly modified conditions. Moreover, the azidation of two natural products, β-estradiol and strychnine, was achieved under these conditions in useful yields. In 2014, Akamanchi and co-workers reported an excellent method for the arylation of naphthoquinones 80 with arylhydrazines 81 using IBX 1 as an oxidizing agent (Scheme 20) [90]. The combination of arylhydrazines 81 and IBX 1 facilitates the in situ generation of aryl free radicals, which act as the aryl source. The reactions went smoothly with a number of substituted naphthoquinones 80 and arylhydrazine derivatives 81. Electronically diverse arylated naphthoquinones 82 were isolated in moderate to good yields under mild conditions. The synthetic utility of arylated naphthoquinones 82 was demonstrated through the short and high-yielding synthesis of benzocarbazoledione, an important antitumor-antibiotic precursor. Previously, the same group reported the N-arylation of aromatic amines using a combination of arylhydrazines and IBX [91]. In 2014, Akamanchi and co-workers reported an excellent method for the arylation of naphthoquinones 80 with arylhydrazines 81 using IBX 1 as an oxidizing agent (Scheme 20) [90]. The combination of arylhydrazines 81 and IBX 1 facilitates the in situ generation of aryl free radicals, which act as the aryl source. The reactions went smoothly with a number of substituted naphthoquinones 80 and arylhydrazine derivatives 81. Electronically diverse arylated naphthoquinones 82 were isolated in moderate to good yields under mild conditions. The synthetic utility of arylated naphthoquinones 82 was demonstrated through the short and high-yielding synthesis of benzocarbazoledione, an important antitumor-antibiotic precursor. Previously, the same group reported the N-arylation of aromatic amines using a combination of arylhydrazines and IBX [91].
A postulated radical-mediated mechanism for the C−H arylation of naphthoquinones 80 is displayed in Scheme 21 [90]. In the beginning, of aryl free radicals, which act as the aryl source. The reactions went smoothly with a number of substituted naphthoquinones 80 and arylhydrazine derivatives 81. Electronically diverse arylated naphthoquinones 82 were isolated in moderate to good yields under mild conditions. The synthetic utility of arylated naphthoquinones 82 was demonstrated through the short and high-yielding synthesis of benzocarbazoledione, an important antitumor-antibiotic precursor. Previously, the same group reported the N-arylation of aromatic amines using a combination of arylhydrazines and IBX [91]. A postulated radical-mediated mechanism for the C−H arylation of naphthoquinones 80 is displayed in Scheme 21 [90].  [92]. The reaction was carried out at 0 °C in the presence of acetonitrile as a solvent. The weak acid-like additive pentafluorobenzoic acid was necessary for high reactivity and enantioselectivity. Using these conditions, cyclic and acyclic ketones 89 smoothly underwent reactions, furnishing chiral ketones 92 with β-stereocenters. A number of electron-rich and -deficient coumarins 90 as nucleophiles tolerated the reaction and produced good yields. However, the β-C−H functionalization of cyclopentanone failed, and no product formation was observed under these conditions.  [92]. The reaction was carried out at 0 • C in the presence of acetonitrile as a solvent. The weak acid-like additive pentafluorobenzoic acid was necessary for high reactivity and enantioselectivity. Using these conditions, cyclic and acyclic ketones 89 smoothly underwent reactions, furnishing chiral ketones 92 with β-stereocenters. A number of electron-rich and -deficient coumarins 90 as nucleophiles tolerated the reaction and produced good yields. However, the β-C−H functionalization of cyclopentanone failed, and no product formation was observed under these conditions. A postulated radical-mediated mechanism for the C−H arylation of naphthoquinones 80 is displayed in Scheme 21 [90].  [92]. The reaction was carried out at 0 °C in the presence of acetonitrile as a solvent. The weak acid-like additive pentafluorobenzoic acid was necessary for high reactivity and enantioselectivity. Using these conditions, cyclic and acyclic ketones 89 smoothly underwent reactions, furnishing chiral ketones 92 with β-stereocenters. A number of electron-rich and -deficient coumarins 90 as nucleophiles tolerated the reaction and produced good yields. However, the β-C−H functionalization of cyclopentanone failed, and no product formation was observed under these conditions.
In 2015, Kim and co-workers described the synthesis of chiral tetrahydroquinolin 102 via IBX-mediated enantioselective intramolecular oxidative coupling 3-arylprop-2-en-1-ols 100 using 2,4-dinitrobenzensulfonic acid (DNBS) 101 as a cataly (Scheme 24) [99]. Both electron-withdrawing and electron-donating substituents we tolerated in 100, and the corresponding products 102 were isolated with excellent ena tioselectivity and up to 99% ee. The reaction was proposed to proceed via the oxidation 100 using IBX 1 followed by 1,5-hydride transfer/ring closure to yield the desired pro ucts 102. In 2015, Kim and co-workers described the synthesis of chiral tetrahydroquinolines 102 via IBX-mediated enantioselective intramolecular oxidative coupling of 3-arylprop-2en-1-ols 100 using 2,4-dinitrobenzensulfonic acid (DNBS) 101 as a catalyst (Scheme 24) [99]. Both electron-withdrawing and electron-donating substituents were tolerated in 100, and the corresponding products 102 were isolated with excellent enantioselectivity and up to 99% ee. The reaction was proposed to proceed via the oxidation of 100 using IBX 1 followed by 1,5-hydride transfer/ring closure to yield the desired products 102.
102 via IBX-mediated enantioselective intramolecular oxidative coupling of 3-arylprop-2-en-1-ols 100 using 2,4-dinitrobenzensulfonic acid (DNBS) 101 as a catalyst (Scheme 24) [99]. Both electron-withdrawing and electron-donating substituents were tolerated in 100, and the corresponding products 102 were isolated with excellent enantioselectivity and up to 99% ee. The reaction was proposed to proceed via the oxidation of 100 using IBX 1 followed by 1,5-hydride transfer/ring closure to yield the desired products 102. In continuation, Kumar and co-workers reported the enantioselective proline-catalyzed synthesis of N-PMP-1,2-dihydropyridines (DHPs) 106 via a one-pot [4 + 2] cycloaddition reaction (Scheme 25) [100]. This chemistry, involving the L-proline-catalyzed direct Mannich reaction/cyclization between glutaraldehyde 103 and aldimines 104 generating tetrahydropyridines 105 in situ, followed by IBX-mediated oxidation, led to the synthesis of DHPs 106. The practical utility of this method was demonstrated through the gram-scale synthesis of N-PMP-1,2-DHPs 106 and the rapid synthesis of a fused chiral tetrahydroquinoline-based skeleton. The same group developed an interesting approach for the preparation of pyrrole-2,4-dialdehydes by treating glutaraldehyde 103 with N-(4-methoxyphenyl)aldimines 104 in a one-pot process (Scheme 26) [101]. This pseudo-[3 + 2]-annulation reaction proceeds via a proline-catalyzed Mannich reaction/cyclization followed by an IBX-induced oxidative rearrangement to provide the final product 107. A number of aldimines 104 decorated with electron-deficient substituents such as NO2, CN, CF3, F, Cl and Br worked well under optimized reaction conditions. Additionally, heteroaromatic aldehydes-based imines 104 furnished the desired pyrrole-2,4-dialdehydes 107 in good yields. Moreover, the practical utility of this method was examined through the gram-scale synthesis of 107, the chemoselective functionalization of aldehyde groups at C2 and the synthesis of the medicinally important pyrrolo [3,2-c]quinoline scaffolds. The same group developed an interesting approach for the preparation of pyrrole-2,4dialdehydes by treating glutaraldehyde 103 with N-(4-methoxyphenyl)aldimines 104 in a one-pot process (Scheme 26) [101]. This pseudo-[3 + 2]-annulation reaction proceeds via a proline-catalyzed Mannich reaction/cyclization followed by an IBX-induced oxidative rearrangement to provide the final product 107. A number of aldimines 104 decorated with electron-deficient substituents such as NO 2 , CN, CF 3 , F, Cl and Br worked well under optimized reaction conditions. Additionally, heteroaromatic aldehydes-based imines 104 furnished the desired pyrrole-2,4-dialdehydes 107 in good yields. Moreover, the practical utility of this method was examined through the gram-scale synthesis of 107, the chemoselective functionalization of aldehyde groups at C2 and the synthesis of the medicinally important pyrrolo [3,2-c]quinoline scaffolds. In continuation, Kumar and co-workers reported the enantioselective proline-catalyzed synthesis of N-PMP-1,2-dihydropyridines (DHPs) 106 via a one-pot [4 + 2] cycloaddition reaction (Scheme 25) [100]. This chemistry, involving the L-proline-catalyzed direct Mannich reaction/cyclization between glutaraldehyde 103 and aldimines 104 generating tetrahydropyridines 105 in situ, followed by IBX-mediated oxidation, led to the synthesis of DHPs 106. The practical utility of this method was demonstrated through the gram-scale synthesis of N-PMP-1,2-DHPs 106 and the rapid synthesis of a fused chiral tetrahydroquinoline-based skeleton. The same group developed an interesting approach for the preparation of pyrrole-2,4-dialdehydes by treating glutaraldehyde 103 with N-(4-methoxyphenyl)aldimines 104 in a one-pot process (Scheme 26) [101]. This pseudo-[3 + 2]-annulation reaction proceeds via a proline-catalyzed Mannich reaction/cyclization followed by an IBX-induced oxidative rearrangement to provide the final product 107. A number of aldimines 104 decorated with electron-deficient substituents such as NO2, CN, CF3, F, Cl and Br worked well under optimized reaction conditions. Additionally, heteroaromatic aldehydes-based imines 104 furnished the desired pyrrole-2,4-dialdehydes 107 in good yields. Moreover, the practical utility of this method was examined through the gram-scale synthesis of 107, the chemoselective functionalization of aldehyde groups at C2 and the synthesis of the medicinally important pyrrolo [3,2-c]quinoline scaffolds. In continuation, Kumar's group demonstrated the one-pot multicomponent synthesis of N-arylpyrrole-3-carbaldehydes 107 via the in situ formation of aldimines 104 from alde-hydes 108 and aromatic amines 109, followed by sequential Mannich reaction-cyclization with succinaldehyde 110 and final IBX-mediated oxidative aromatization (Scheme 27) [102]. The scope of the reaction was examined with a variety of in situ generated aryl/hetero-aryl imines 104 to provide the corresponding products 107 in good yields. A stepwise mechanism proposed for the one-pot synthesis of N-arylpyrrole-3-carbaldehydes 107 is depicted in Scheme 28 [102]. Initially, the reaction of succinaldehyde 110 with the proline catalyst generates enamine 111, which reacts with the in situ generated NPMP-imine Dibenzo[b,f ] [1,4]oxazepine (DBO) derivatives are privileged scaffolds in organic chemistry, owing to their interesting medicinal and biological properties [103,104]. In this respect, Kumar's group developed the synthesis of 1,4-oxazepines-fused 1,2-dihydropyridines (DHPs) 116 via a proline-catalyzed [4 + 2] annulation between glutaraldehyde 103 and cyclic imines 115 (Scheme 29) [105]. The reaction scope was explored with a variety of substituted dibenzoxazepine imines 115, and the resulting products 116 were isolated in high yields (70-92%) with excellent enantioselectivity (up to >99:1 er). However, oxazepineimines with o-CF 3 substitution failed to provide the desired products, possibly due to steric hindrance caused by the CF 3 group.  [103,104]. In this respect, Kumar's group developed the synthesis of 1,4-oxazepines-fused 1,2-dihydropyridines (DHPs) 116 via a proline-catalyzed [4 + 2] annulation between glutaraldehyde 103 and cyclic imines 115 (Scheme 29) [105]. The reaction scope was explored with a variety of substituted dibenzoxazepine imines 115, and the resulting products 116 were isolated in high yields (70-92%) with excellent enantioselectivity (up to >99:1 er). However, oxazepine-imines with o-CF3 substitution failed to provide the desired products, possibly due to steric hindrance caused by the CF3 group. A plausible mechanism for the oxidative annulation reaction of 117 is depicted in Scheme 31 [106].  Dibenzo[b,f] [1,4]oxazepine (DBO) derivatives are privileged scaffolds in organic chemistry, owing to their interesting medicinal and biological properties [103,104]. In this respect, Kumar's group developed the synthesis of 1,4-oxazepines-fused 1,2-dihydropyridines (DHPs) 116 via a proline-catalyzed [4 + 2] annulation between glutaraldehyde 103 and cyclic imines 115 (Scheme 29) [105]. The reaction scope was explored with a variety of substituted dibenzoxazepine imines 115, and the resulting products 116 were isolated in high yields (70-92%) with excellent enantioselectivity (up to >99:1 er). However, oxazepine-imines with o-CF3 substitution failed to provide the desired products, possibly due to steric hindrance caused by the CF3 group. A plausible mechanism for the oxidative annulation reaction of 117 is depicted in Scheme 31 [106]. A plausible mechanism for the oxidative annulation reaction of 117 is depicted in Scheme 31 [106]. The reaction begins with the α-halogenation of the Mannich precur-  In 2020, Zhang et al. demonstrated the IBX-mediated tandem oxidation-cyclization of tryptophan analogs 127 with N-arylamide side chains, producing a library of polycyclic spiroindolines 128 under mild conditions (Scheme 32) [109]. A number of N-protected tryptophan derivatives 127 worked well, and the anticipated oxazine-bearing complex polycyclicindolines 128 were synthesized in 30-96% yields. However, the N-unprotected tryptophan analog 127 (R 1 = H) failed to yield the desired product. The key feature of this tandem cyclization reaction is the creation of multiple stereocenters, including a quaternary stereocenter, in a single step. Scheme 31. The plausible mechanism for the oxidative cyclization of the Mannich precursors 117 using IBX 1 as an oxidant.
In 2020, Zhang et al. demonstrated the IBX-mediated tandem oxidation-cyclization of tryptophan analogs 127 with N-arylamide side chains, producing a library of polycyclic spiroindolines 128 under mild conditions (Scheme 32) [109]. A number of N-protected tryptophan derivatives 127 worked well, and the anticipated oxazine-bearing complex polycyclicindolines 128 were synthesized in 30-96% yields. However, the N-unprotected tryptophan analog 127 (R 1 = H) failed to yield the desired product. The key feature of this tandem cyclization reaction is the creation of multiple stereocenters, including a quaternary stereocenter, in a single step. In 2020, Zhang et al. demonstrated the IBX-mediated tandem oxidation-cyclization of tryptophan analogs 127 with N-arylamide side chains, producing a library of polycyclic spiroindolines 128 under mild conditions (Scheme 32) [109]. A number of N-protected tryptophan derivatives 127 worked well, and the anticipated oxazine-bearing complex polycyclicindolines 128 were synthesized in 30-96% yields. However, the N-unprotected tryptophan analog 127 (R 1 = H) failed to yield the desired product. The key feature of this tandem cyclization reaction is the creation of multiple stereocenters, including a quaternary stereocenter, in a single step. Scheme 32. Tandem oxidation-cyclization of tryptophan analogs 127 to yield polycyclic spiroindolines 128 using IBX 1 as an oxidant.
The proposed mechanism for the IBX-mediated spiro-fused cyclization of tryptophan analogs 127 is shown in Scheme 33 [109]. The proposed mechanism for the IBX-mediated spiro-fused cyclization of tryptophan analogs 127 is shown in Scheme 33 [109].  [110]. Phenyl enaminoesters substituted with methoxy, fluoro, chloro and bromo groups provided the desired pyrrole 135 in good yields. Likewise, substrates with electron-withdrawing groups such as CO2Me, -CO2Et, -CN and -COPh, were well tolerated under these conditions. Further exchanging the N-substituted moiety with N-hydroxypropyls (n = 2) yielded 2,3-disubstituted pyridines 136 in moderate to good yields.  [110]. Phenyl enaminoesters substituted with methoxy, fluoro, chloro and bromo groups provided the desired pyrrole 135 in good yields. Likewise, substrates with electron-withdrawing groups such as CO 2 Me, -CO 2 Et, -CN and -COPh, were well tolerated under these conditions. Further exchanging the N-substituted moiety with N-hydroxypropyls (n = 2) yielded 2,3-disubstituted pyridines 136 in moderate to good yields.
In 2021, Favi and others developed an unprecedented method to access polysubstituted indolefused pyridazines 138 via the intramolecular oxidative cyclization of αindolylhydrazones 137 using iodylbenzene (PhIO 2 ) 9 as an oxidant (Scheme 35) [111]. The addition of TFA (20 mol%) was essential for the smooth proceeding of the reaction. The substrate scope of the cycloamination reaction was investigated with an array of αindolylhydrazones 137, and the anticipated azacarbolines 138 were obtained in good to excellent yields.
A proposed mechanistic pathway for the C(sp 2 )−H/N−H dehydrogenative coupling reaction of α-indolylhydrazones 137 is depicted in Scheme 36 [111]. In 2021, Favi and others developed an unprecedented method to access polysubstituted indolefused pyridazines 138 via the intramolecular oxidative cyclization of α-indolylhydrazones 137 using iodylbenzene (PhIO2) 9 as an oxidant (Scheme 35) [111]. The addition of TFA (20 mol%) was essential for the smooth proceeding of the reaction. The substrate scope of the cycloamination reaction was investigated with an array of α-indolylhydrazones 137, and the anticipated azacarbolines 138 were obtained in good to excellent yields. In 2021, Favi and others developed an unprecedented method to access polysubstituted indolefused pyridazines 138 via the intramolecular oxidative cyclization of α-indolylhydrazones 137 using iodylbenzene (PhIO2) 9 as an oxidant (Scheme 35) [111]. The addition of TFA (20 mol%) was essential for the smooth proceeding of the reaction. The substrate scope of the cycloamination reaction was investigated with an array of α-indolylhydrazones 137, and the anticipated azacarbolines 138 were obtained in good to excellent yields.

Miscellaneous Reactions
In 2016, Kuhakarn disclosed the deacylative sulfonylation of 1,3-dicarbonyl compounds 145 with sodium sulfinates 146 by employing IBX 1 and a catalytic amount of iodine (Scheme 37) [112]. This led to the one-pot synthesis of β-carbonyl sulfones 147 in good yields with a broad substrates scope. Notably, benzoylacetone derivatives 145 with electron-donating groups (Me, t Bu, OMe) provided higher product yields compared to derivatives with electron-attracting groups (Cl and NO2). The reactions with acetylacetone, β-keto esters and β-keto amides as substrates yielded the corresponding products in low to moderate yields. The same group previously reported the synthesis of β-keto sulfones by reacting alkenes with sodium arenesulfinates in the presence of IBX-Scheme 36. Tentative mechanism for the oxidative cyclization of α-indolylhydrazones 137 using PhIO 2 9 as an oxidant.

Miscellaneous Reactions
In 2016, Kuhakarn disclosed the deacylative sulfonylation of 1,3-dicarbonyl compounds 145 with sodium sulfinates 146 by employing IBX 1 and a catalytic amount of iodine (Scheme 37) [112]. This led to the one-pot synthesis of β-carbonyl sulfones 147 in good yields with a broad substrates scope. Notably, benzoylacetone derivatives 145 with electron-donating groups (Me, t Bu, OMe) provided higher product yields compared to derivatives with electron-attracting groups (Cl and NO 2 ). The reactions with acetylacetone, β-keto esters and β-keto amides as substrates yielded the corresponding products in low to moderate yields. The same group previously reported the synthesis of β-keto sulfones by reacting alkenes with sodium arenesulfinates in the presence of IBX-iodine [113].

Conclusions
This review summarized the recent developments in oxidative transformation tions using hypervalent iodine(V) reagents. Hypervalent iodine compounds emerged as versatile, non-toxic and environment friendly oxidants in organic synt Although the chemistry of trivalent iodine reagents is well developed, the synthet plication of organoiodine(V) reagents has seen considerable growth only in recent t Various synthetic transformations such as oxidation of alcohols, oxidation of am oxidation of amides, oxidation of aromatic compounds, oxidation of alkenes and o tive cyclizations have been achieved using iodine(V) reagents. In parti 2-iodoxybenzoic acid (IBX) and Dess-Martin periodinane (DMP) have received attention owing to their mild oxidizing properties, high chemoselectivity and broa Scheme 37. IBX-I 2 -mediated synthesis of β-carbonyl sulfones via the deacylative sulfonylation of 1,3-dicarbonyl compounds.

Conclusions
This review summarized the recent developments in oxidative transformation reactions using hypervalent iodine(V) reagents. Hypervalent iodine compounds have emerged as versatile, non-toxic and environment friendly oxidants in organic synthesis. Although the chemistry of trivalent iodine reagents is well developed, the synthetic application of organoiodine(V) reagents has seen considerable growth only in recent times. Various synthetic transformations such as oxidation of alcohols, oxidation of amines, oxidation of amides, oxidation of aromatic compounds, oxidation of alkenes and oxidative cyclizations have been achieved using iodine(V) reagents. In particular, 2-iodoxybenzoic acid (IBX) and Dess-Martin periodinane (DMP) have received great attention owing to their mild oxidizing properties, high chemoselectivity and broad applicability. Moreover, significant work has been accomplished for the development of new catalytic systems based on in situ generated hypervalent iodine(V) reagents through the oxidation of organoiodine compounds. Addressing the solubility issues of IBX and designing new catalytic systems involving the in situ generation of hypervalent iodine(V) species represent an intriguing area of future investigation. In addition, the development of novel recyclable polymer-supported hypervalent iodine(V) reagents is a topic of great interest from a future perspective.