Synthesis, Self-Assembly, and Cell Responses of Aromatic IKVAV Peptide Amphiphiles

Synthetic bioactive aromatic peptide amphiphiles have been recognized as key elements of emerging biomedical strategies due to their biocompatibility, design flexibility, and functionality. Inspired by natural proteins, we synthesized two supramolecular materials of phenyl-capped Ile-Lys-Val-Ala-Val (Ben-IKVAV) and perfluorophenyl-capped Ile-Lys-Val-Ala-Val (PFB-IKVAV). We employed UV-vis absorption, fluorescence, circular dichroism, and Fourier-transform infrared spectroscopy to examine the driving force in the self-assembly of the newly discovered materials. It was found that both compounds exhibited ordered π-π interactions and secondary structures, especially PFB-IKVAV. The cytotoxicity of human mesenchymal stem cells (hMSCs) and cell differentiation studies was also performed. In addition, the immunofluorescent staining for neuronal-specific markers of MAP2 was 4.6 times (neural induction medium in the presence of PFB-IKVAV) that of the neural induction medium (control) on day 7. From analyzing the expression of neuronal-specific markers in hMSCs, it can be concluded that PFB-IKVAV may be a potential supramolecular biomaterial for biomedical applications.

Aromatic peptide amphiphiles are currently the simplest and most effective method to develop low-molecular weight self-assembled biofunctional materials [33][34][35]. In aqueous solutions, aromatic peptide amphiphiles assemble by parallel, antiparallel, or interlocked antiparallel stacking arrangements to vesicles, micelles, nanotubes, and nanofibers, which subsequently cross-link into soft biomaterials [36][37][38][39][40]. For example, the 9-fluorenylmethoxycarbonyl (Fmoc) group was extensively used as an N-terminal aromatic component, and Fmoc-FF was a classic example of low molecular weight self-assembled biomaterials [36]. Aromatic incorporation with functional peptide sequences will afford more useful biomedical applications. It is known that laminin α1 chain-derived Ile-Lys-Val-Ala-Val (IKVAV) has diverse biological activities, including the promotion of cell adhesion, neural differentiation, and axon extension [41][42][43]. Many research results have reported improved neurite outgrowth Val-Ala-Val (IKVAV) has diverse biological activities, including the promotion of cell adhesion, neural differentiation, and axon extension [41][42][43]. Many research results have reported improved neurite outgrowth of the stem cells with extracellular matrix scaffolds biofunctionalized with IKVAV motifs in the chemical structures of the materials. [44][45][46][47]. Roy et al. designed and synthesized Fmoc-IKVAV and Fmoc-YIGSR. They demonstrate the great potential of laminin-derived hydrogels in neuronal stem cell differentiation [48]. Thompson and Parish investigated Fmoc-DDIKVAV and successfully constructed strategies to improve stem cell therapy in brain repair [49].
We have recently developed a series of perfluorophenyl-capped peptides (PFB-peptides) and proved PFB is an effective N-terminal aromatic component to trigger the assembly of aromatic peptide amphiphiles [50][51][52][53][54]. In this research, we newly synthesized Ben-IKVAV (phenyl-capped pentapeptides) and PFB-IKVAV. We systematically investigate the self-assembly, microscopic morphology, mechanical, photophysical, and biological properties of Ben-IKVAV and PFB-IKVAV. It was found that PFB-IKVAV hydrogelator contains more β-sheet structures and has better cell differentiation ability than Ben-IKVAV, making it possible for tissue engineering and regenerative medicine application.

Molecular Design and Synthesis
Self-assembling materials incorporating aromatic moieties with IKVAV peptides can be used as a platform technology to enhance the survival of human mesenchymal stem cells (hMSCs, 3A6) and their neuron differentiation. In this study, we modified Ben and PFB with the IKVAV peptide sequence for the novel materials of Ben-IKVAV and PFB-IKVAV. The synthetic route is shown in Figure 1; the peptide derivatives of Ben-IKVAV and PFB-IKVAV were prepared by the solid phase peptide synthesis (SPPS) method starting from 2-chlorotrityl chloride resin [55]. The peptide part was synthesized by adding Fmoc-L-Val-OH with coupling agents of HBTU and DIEA and then deprotection by piperidine. A similar procedure was repeated for Fmoc-L-Ala-OH, Fmoc-L-Val-OH, Fmoc-L-Lys(Boc)-OH and Fmoc-L-Ile-OH to grow the IKVAV peptide. Finally, 2-phenylacetic acid was added and treated with TFA to obtain Ben-IKVAV. The analog of PFB-IKVAV was afforded by replacing the 2-phenylacetic acid with 2-(perfluorophenyl)acetic acid.

Investigation of Self-Assembly Properties
For biomedical applications, the self-assembly properties of Ben-IKVAV and PFB-IKVAV were investigated under physiological conditions. It was found that both Ben-IKVAV and PFB-IKVAV (1 wt.%, ca. 15 mM) could form white translucent hydrogels under pH 7.4, and the optical images were shown in the insets of Figure 2. The corresponding microscopic morphologies were examined by transmission electron microscopy (TEM). Figure 2, the negatively stained nanofiber structures of Ben-IKVAV were observed with a diameter of 4 ± 2 nm. The nanofibers are intertwined to form fiber bundles with a width of about 17 ± 1 nm. In contrast, PFB-IKVAV produces short nanofibers (diameter around 10 ± 1 nm). These fibrous nanostructures are distributed in water and entangled within a highly organized peptide-amphiphile nanofibers network (i.e., Ben-IKVAV and PFB-IKVAV), allowing for the formation of stable hydrogels. Moreover, the Tgel-sol of Ben-IKVAV and PFB-IKVAV were 65 and 55 • C, respectively. Figure 3 reveals the mechanical properties of 1 wt.% Ben-IKVAV and PFB-IKVAV, which were measured by oscillatory rheology. The storage modulus (G ) of Ben-IKVAV and PFB-IKVAV were 32.0 kPa and 2.4 kPa, respectively, suggesting they were suitable for applications in tissue engineering and regenerative medicine [56]. Furthermore, the self-assembly of Ben-IKVAV and PFB-IKVAV are viscoelastic gels, because the values of the G are higher than those of the loss modulus (G ) in both gels.

Investigation of Self-Assembly Properties
For biomedical applications, the self-assembly properties of Ben-IKVAV and PFB-IKVAV were investigated under physiological conditions. It was found that both Ben-IKVAV and PFB-IKVAV (1 wt.%, ca. 15 mM) could form white translucent hydrogels under pH 7.4, and the optical images were shown in the insets of Figure 2. The corresponding microscopic morphologies were examined by transmission electron microscopy (TEM). As displayed in Figure 2, the negatively stained nanofiber structures of Ben-IKVAV were observed with a diameter of 4 ± 2 nm. The nanofibers are intertwined to form fiber bundles with a width of about 17 ± 1 nm. In contrast, PFB-IKVAV produces short nanofibers (diameter around 10 ± 1 nm). These fibrous nanostructures are distributed in water and entangled within a highly organized peptide-amphiphile nanofibers network (i.e., Ben-IKVAV and PFB-IKVAV), allowing for the formation of stable hydrogels. Moreover, the Tgel-sol of Ben-IKVAV and PFB-IKVAV were 65 and 55 °C, respectively. Figure 3 reveals the mechanical properties of 1 wt.% Ben-IKVAV and PFB-IKVAV, which were measured by oscillatory rheology. The storage modulus (G′) of Ben-IKVAV and PFB-IKVAV were 32.0 kPa and 2.4 kPa, respectively, suggesting they were suitable for applications in tissue engineering and regenerative medicine [56]. Furthermore, the self-assembly of Ben-IKVAV and PFB-IKVAV are viscoelastic gels, because the values of the G' are higher than those of the loss modulus (G") in both gels.

Investigation of Self-Assembly Properties
For biomedical applications, the self-assembly properties of Ben-IKVAV and PFB-IKVAV were investigated under physiological conditions. It was found that both Ben-IKVAV and PFB-IKVAV (1 wt.%, ca. 15 mM) could form white translucent hydrogels under pH 7.4, and the optical images were shown in the insets of Figure 2. The corresponding microscopic morphologies were examined by transmission electron microscopy (TEM). As displayed in Figure 2, the negatively stained nanofiber structures of Ben-IKVAV were observed with a diameter of 4 ± 2 nm. The nanofibers are intertwined to form fiber bundles with a width of about 17 ± 1 nm. In contrast, PFB-IKVAV produces short nanofibers (diameter around 10 ± 1 nm). These fibrous nanostructures are distributed in water and entangled within a highly organized peptide-amphiphile nanofibers network (i.e., Ben-IKVAV and PFB-IKVAV), allowing for the formation of stable hydrogels. Moreover, the Tgel-sol of Ben-IKVAV and PFB-IKVAV were 65 and 55 °C, respectively. Figure 3 reveals the mechanical properties of 1 wt.% Ben-IKVAV and PFB-IKVAV, which were measured by oscillatory rheology. The storage modulus (G′) of Ben-IKVAV and PFB-IKVAV were 32.0 kPa and 2.4 kPa, respectively, suggesting they were suitable for applications in tissue engineering and regenerative medicine [56]. Furthermore, the self-assembly of Ben-IKVAV and PFB-IKVAV are viscoelastic gels, because the values of the G' are higher than those of the loss modulus (G") in both gels.

Spectroscopic Characterization
Since Ben-IKVAV and PFB-IKVAV could self-assemble to form the network of nanofibers and afford the hydrogels, we further studied the driving force for the intermolecular interactions of the hydrogelators using spectroscopic characterization [57,58]. We found that the compounds uniformly dispersed in methanol with disordered ar-rangements, which is different from that in water. The UV-vis absorption and circular dichroism (CD) spectra of Ben-IKVAV and PFB-IKVAV in water and methanol are presented in Figure 4. The absorption peaks of Ben-IKVAV are at 262 nm and 254 nm in water and methanol, respectively, indicating the redshift feature caused by the aggregation formation in an aqueous solution. Interestingly, for PFB-IKVAV, except for the redshift of the main absorption peak in water, a new absorption band around 285 nm appeared, presumably attributed to the denser aggregation of the PFB units in PFB-IKVAV. CD spectra were recorded to understand the structural properties and molecular arrangement of Ben-IKVAV and PFB-IKVAV ( Figure 4C,D). At low concentrations of Ben-IKVAV and PFB-IKVAV (50 and 500 µM) in water, no CD signals were detected in the wavelength region 190-350 nm. Increasing the concentration to 1000 µM, both compounds exhibited a significant Cotton effect in the aromatic ring region, revealing they may have π-π interactions between molecules and accompany an orderly arrangement in the aqueous environment. Meanwhile, we also observed that the hydrogelators of Ben-IKVAV and PFB-IKVAV had a negative peak at 210-220 nm and a positive peak around 197 nm, indicating that they have β-sheet conformation in the self-assembly pentapeptide hydrogelators [59]. These results suggest that Ben-IKVAV and PFB-IKVAV may self-assemble into the high-order supramolecular structures through π-π interactions and hydrogen bonding when the concentration is higher than 1000 µM. In addition, Fourier-transform infrared spectroscopy (FT-IR) was employed to verify the hydrogen interactions between molecules in the self-assembled state. As revealed by FT-IR, the FT-IR spectra of Ben-IKVAV and PFB-IKVAV at 5000 µM in water displayed strong absorption peaks at 1630 cm −1 , demonstrating the hydrogen bonding interaction in the assemblies ( Figure S1, Supplementary Materials) [60]. Since thioflavin T (ThT) is a well-known fluorescent dye utilized to identify the presence of amyloid fibrils [61], we used the ThT fluorescence assay to further confirm the fibrillar peptide structures present in Ben-IKVAV and PFB-IKVAV. It is known that when ThT binds to β-amyloid fibrils, a remarkable enhancement in fluorescence intensity can be detected at 484 nm. Figure 5 shows the ratio of the emission intensities of ThT at various concentrations of Ben-IKVAV and PFB-IKVAV. It was found that the calculated fluorescence enhancement ratios were 140 and 210, respectively, suggesting that the self-assembly of Ben-IKVAV and PFB-IKVAV may exhibit β-sheet-like conformation and more folded secondary structures in the presence of PFB-IKVAV. Notably, PFB-IKVAV has a larger electronegativity than Ben-IKVAV at the terminal end of the molecule, thereby having different hydrogen-bonding interactions and resulting in the different behavior of fluorescence intensity with ThT.    . Absorption spectra of (A) Ben-IKVAV and (B) PFB-IKVAV at a concentration of 1 wt.% (red for water and black for methanol). CD spectra of (C) Ben-IKVAV and (D) PFB-IKVAV in water (blue for 50 μM, green for 500 μM, black for 1000 μM, and red for 5000 μM).

Cytotoxicity Test
To evaluate the potential biological applications of Ben-IKVAV and PFB-IKVAV, we performed a biocompatibility test of these hydrogelators against hMSCs through MTT [3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide] assay [62], and the results are presented in Figure 6. The concentrations of Ben-IKVAV and PFB-IKVAV were selected in the range of 10-500 μM, and the cell viability measurements were processed at 24 and 48 h after cell seeding. We found that the half-inhibitory concentration (IC50) of the two compounds was greater than 500 μM, and the cell viabilities were over 75% when cultured at a concentration of 500 μM for 48 h. Therefore, it can be proved that the two compounds have good biocompatibility and can be further used for cell differentiation studies.

Cytotoxicity Test
To evaluate the potential biological applications of Ben-IKVAV and PFB-IKVAV, we performed a biocompatibility test of these hydrogelators against hMSCs through MTT [3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide] assay [62], and the results are presented in Figure 6. The concentrations of Ben-IKVAV and PFB-IKVAV were selected in the range of 10-500 µM, and the cell viability measurements were processed at 24 and 48 h after cell seeding. We found that the half-inhibitory concentration (IC 50 ) of the two compounds was greater than 500 µM, and the cell viabilities were over 75% when cultured at a concentration of 500 µM for 48 h. Therefore, it can be proved that the two compounds have good biocompatibility and can be further used for cell differentiation studies.

Cell Differentiation Study
Since Ben-IKVAV and PFB-IKVAV are biocompatible, we then diluted 1 w Ben-IKVAV and PFB-IKVAV hydrogels with basal medium and neural inductio dium (NIM) to 1000 μM, respectively, and cultured them with hMSCs for 0, 2, and ( Figures S2 and 7). From the experimental results, hMSCs cultured with NIM, in th ence of Ben-IKVAVor PFB-IKVAV, could successfully differentiate hMSCs into n like cells (Figure 7). The fibrous structures of Ben-IKVAV orPFB-IKVAV scattered culture medium (NIM) are combined with cell surface receptors to promote neural entiation. To understand the effect of neural differentiation of hMSCs, the average n outgrowth lengths on days 2 and 7 were measured in the control and experimental g (i.e., Ben-IKVAV in NIM and PFB-IKVAV in NIM). As shown in Figure 8, there w significant difference in cell morphology and axon extension length; we further i gated the molecular biology analysis of the three samples to distinguish the effect materials.

Cell Differentiation Study
Since Ben-IKVAV and PFB-IKVAV are biocompatible, we then diluted 1 wt.% of Ben-IKVAV and PFB-IKVAV hydrogels with basal medium and neural induction medium (NIM) to 1000 µM, respectively, and cultured them with hMSCs for 0, 2, and 7 days (Figures S2 and 7). From the experimental results, hMSCs cultured with NIM, in the presence of Ben-IKVAV or PFB-IKVAV, could successfully differentiate hMSCs into neuron-like cells (Figure 7). The fibrous structures of Ben-IKVAV or PFB-IKVAV scattered in the culture medium (NIM) are combined with cell surface receptors to promote neural differentiation. To understand the effect of neural differentiation of hMSCs, the average neurite outgrowth lengths on days 2 and 7 were measured in the control and experimental groups (i.e., Ben-IKVAV in NIM and PFB-IKVAV in NIM). As shown in Figure 8, there was no significant difference in cell morphology and axon extension length; we further investigated the molecular biology analysis of the three samples to distinguish the effect of the materials. entiation. To understand the effect of neural differentiation of hMSCs, the average neurite outgrowth lengths on days 2 and 7 were measured in the control and experimental groups (i.e., Ben-IKVAV in NIM and PFB-IKVAV in NIM). As shown in Figure 8, there was no significant difference in cell morphology and axon extension length; we further investigated the molecular biology analysis of the three samples to distinguish the effect of the materials.  To investigate whether IKVAV derivatives can effectively promote the differentiation of stem cells into neural cells, we diluted 1 wt.% of Ben-IKVAV and PFB-IKVAV hydrogels with NIM to 1000 μM, respectively, and cultured hMSCs for 0, 2, and 7 days. The mRNA was collected from NIM, NIM in the presence of Ben-IKVAV, and NIM in the presence of PFB-IKVAV and subjected to real-time quantitative polymerase chain reaction (RT-qPCR) analysis [63]. The expression of neuronal-specific markers, Nestin, β-tubulin, SNCA, and MAP2 are analyzed in this work [64][65][66][67]. As can be seen from Figure 9, it was found that the expression levels of Nestin and β-tubulin increased on day 2. However, the expression levels of both gradually decreased with the increase in differentiation days (i.e., day 7). The marker genes for the middle and late stages of neurons were all upregulated, especially the expression level of MAP2 genes was significantly increased on day 7. Although we did not observe a noticeable difference in cell morphology between NIM (control), NIM in the presence of Ben-IKVAV, and NIM in the presence of PFB-IKVAV in Figure 7, there were significant differences in the expression of nerve cell-specific marker genes (Figure 9). These results suggest that Ben-IKVAV and PFB-IKVAV To investigate whether IKVAV derivatives can effectively promote the differentiation of stem cells into neural cells, we diluted 1 wt.% of Ben-IKVAV and PFB-IKVAV hydrogels with NIM to 1000 µM, respectively, and cultured hMSCs for 0, 2, and 7 days. The mRNA was collected from NIM, NIM in the presence of Ben-IKVAV, and NIM in the presence of PFB-IKVAV and subjected to real-time quantitative polymerase chain reaction (RT-qPCR) analysis [63]. The expression of neuronal-specific markers, Nestin, β-tubulin, SNCA, and MAP2 are analyzed in this work [64][65][66][67]. As can be seen from Figure 9, it was found that the expression levels of Nestin and β-tubulin increased on day 2. However, the expression levels of both gradually decreased with the increase in differentiation days (i.e., day 7). The marker genes for the middle and late stages of neurons were all up-regulated, especially the expression level of MAP2 genes was significantly increased on day 7. Although we did not observe a noticeable difference in cell morphology between NIM (control), NIM in the presence of Ben-IKVAV, and NIM in the presence of PFB-IKVAV in Figure 7, there were significant differences in the expression of nerve cell-specific marker genes (Figure 9). These results suggest that Ben-IKVAV and PFB-IKVAV may have begun to regulate the differentiation mechanism in the cells and can effectively promote the trend of mesenchymal stem cells towards neural cell differentiation. Additionally, PFB-IKVAV has shown a better cell differentiation ability than Ben-IKVAV. After neuronal inductions of hMSCs, immunofluorescent staining for neuronal-specific markers of β-tubulin and MAP2 was achieved [68,69]. Figure 10 presents immunostaining for β-tubulin (green) with DAPI (blue) co-staining in hMSCs cultured with NIM (control), NIM in the presence of Ben-IKVAV, and NIM in the presence of PFB-IKVAV for days 1, 2, and 7. It can be seen that there is no β-tubulin stained on day 1. As the culture time increased to day 2, the expression of β-tubulin in the control group and the experimental groups showed an increasing trend, indicating a trend of neural differentiation and the extension of neural axons. On the 7th day of culture, a more evident increase of β-tubulin was observed. Immunostaining for MAP2 (red) with DAPI (blue) costaining showed the similarity results ( Figure 11); more interestingly, in addition to the more pronounced increase in MAP2, the expression of MAP2 was also found in the nucleus on day 7. It is speculated that the nuclear entry may be related to the initiation of the regulation of the gene level in the nucleus to make the differentiation more complete. An analysis of neuronal-specific markers by immunostaining revealed that the morphology of neuronal cells changes were sustained with the expression of β-tubulin and MAP2 in hMSCs (Figures 10 and 11). According to our observation, the cell morphology changed significantly after 2 days of culture in NIM, in the presence of Ben-IKVAV and PFB-IKVAV. After 7 days of differentiation, the cells gradually tended to mature nerve cells. Among these materials, PFB-IKVAV is the best one for helping cell differentiation. After neuronal inductions of hMSCs, immunofluorescent staining for neuronal-specific markers of β-tubulin and MAP2 was achieved [68,69]. Figure 10 presents immunostaining for β-tubulin (green) with DAPI (blue) co-staining in hMSCs cultured with NIM (control), NIM in the presence of Ben-IKVAV, and NIM in the presence of PFB-IKVAV for days 1, 2, and 7. It can be seen that there is no β-tubulin stained on day 1. As the culture time increased to day 2, the expression of β-tubulin in the control group and the experimental groups showed an increasing trend, indicating a trend of neural differentiation and the extension of neural axons. On the 7th day of culture, a more evident increase of β-tubulin was observed. Immunostaining for MAP2 (red) with DAPI (blue) co-staining showed the similarity results ( Figure 11); more interestingly, in addition to the more pronounced increase in MAP2, the expression of MAP2 was also found in the nucleus on day 7. It is speculated that the nuclear entry may be related to the initiation of the regulation of the gene level in the nucleus to make the differentiation more complete. An analysis of neuronal-specific markers by immunostaining revealed that the morphology of neuronal cells changes were sustained with the expression of β-tubulin and MAP2 in hMSCs (Figures 10 and 11). According to our observation, the cell morphology changed significantly after 2 days of culture in NIM, in the presence of Ben-IKVAV and PFB-IKVAV. After 7 days of differentiation, the cells gradually tended to mature nerve cells. Among these materials, PFB-IKVAV is the best one for helping cell differentiation.

Materials and Apparatus
Chemicals were obtained from Aldrich unless specified otherwise. 1 H NMR (nuclear magnetic resonance spectroscopy) spectra were measured in DMSO-d 6 using a 300 MHz NMR spectrometer. The optical microscope images of cell morphology were recorded with a CLSM (Leica TCS SP5X, Wetzlar, Germany).

Materials and Apparatus
Chemicals were obtained from Aldrich unless specified otherwise. 1 H NMR (nuclear magnetic resonance spectroscopy) spectra were measured in DMSO-d 6 using a 300 MHz NMR spectrometer. The optical microscope images of cell morphology were recorded with a CLSM (Leica TCS SP5X, Wetzlar, Germany).

Materials and Apparatus
Chemicals were obtained from Aldrich unless specified otherwise. 1 H NMR (nuclear magnetic resonance spectroscopy) spectra were measured in DMSO-d 6 using a 300 MHz NMR spectrometer. The optical microscope images of cell morphology were recorded with a CLSM (Leica TCS SP5X, Wetzlar, Germany).

Synthesis of Ben-IKVAV
2-Chlorotrityl chloride resin (1.2 g, 1.000 mmol) was swelled in anhydrous CH 2 Cl 2 for 30 min, and then Fmoc-L -Val-OH (0.678 g, 2.000 mmol) was loaded onto the resin in anhydrous DIEA (0.830 mL, 5.000 mmol) for 1 h. For deprotection of the Fmoc group, 20% piperidine was added, and the sample was left for 30 min; this procedure was repeated twice (each time for 2 min). Fmoc-L -Ala-OH (0.851 g, 2.000 mmol) was reacted to the amino group using HBTU (0.758 g, 2.000 mmol) and DIEA (0.830 mL, 5.000 mmol) as coupling agents for 30 min. Again, the sample was treated with 20% piperidine for 30 min; this procedure was repeated twice (each time for 2 min). Fmoc-L -Val-OH (0.678 g, 2.000 mmol) was coupled to the amino group using HBTU (0.758 g, 2.000 mmol) and DIEA (0.830 mL, 5.000 mmol) as coupling agents for 30 min. Again, the sample was treated with 20% piperidine for 30 min; this procedure was repeated twice (each time for 2 min). Fmoc-L -Lys(Boc)-OH (0.937 g, 2.000 mmol) was coupled to the amino group using HBTU (0.758 g, 2.000 mmol) and DIEA (0.830 mL, 5.000 mmol) as coupling agents for 30 min. Again, the sample was treated with 20% piperidine for 30 min; this procedure was repeated twice (each time for 2 min). Fmoc-L -Ile-OH (0.707 g, 2.000 mmol) was coupled to the amino group using HBTU (0.758 g, 2.000 mmol) and DIEA (0.830 mL, 5.000 mmol) as coupling agents for 30 min. Again, the sample was treated with 20% piperidine for 30 min; this procedure was repeated twice (each time for 2 min). Finally, 2-phenylacetic acid (0.372 g, 3.000 mmol) was coupled to the free amino group using HBTU (1.138 g, 3.000 mmol) and DIEA (1.250 mL, 7.500 mmol) as coupling agents. After the reaction mixture was stirred overnight, the peptide derivative was cleaved through treatment with TFA. The resulting solution was dried under air, and then DI water was added to precipitate the target product. The solid was dried under a vacuum to remove the residual solvent (light brown solid: 0.467 g) (Figures S3 and S5). 1

Synthesis of PFB-IKVAV
A similar procedure was used for Fmoc-L -Val-OH, Fmoc-L -Ala-OH, Fmoc-L -Val-OH, Fmoc-L -Lys(Boc)-OH, and Fmoc-L -Ile-OH to grow the IKVAV peptide. Subsequently, 2-(perfluorophenyl)acetic acid (0.678 g, 3.000 mmol) was coupled to the free amino group using HBTU (1.138 g, 3.000 mmol) and DIEA (1.250 mL, 7.500 mmol) as coupling agents. After the reaction mixture had been stirred overnight, the aromatic-capped peptide derivative was cleaved through treatment with TFA. The resulting solution was dried by air, and then DI water was added to precipitate the target product. The solid material was dried under a vacuum to remove the residual solvent (light brown solid: 0. 592 g) (Figures S4 and S6). 1

Cell Viability Tests
The biocompatibilities of Ben-IKVAV and PFB-IKVAV were measured by the MTT cell viability test. The hMSCs were seeded in 24-well plates (density: 50,000 cells per well) with Dulbecco's modified Eagle's medium (DMEM, 0.5 mL) containing 10% phosphatebuffered saline (PBS, pH 7.4) and 1% penicillin/streptomycin solution and then incubated for 24 h. Compounds of Ben-IKVAV and PFB-IKVAV at different concentrations (10,50,100,200, and 500 µM) were added when cells were plated. After 24 and 48 h, the medium was replaced with fresh medium supplemented with MTT reagent (4 mg mL -1 , 0.5 mL per well). After another 4 h, the medium containing MTT was removed, and DMSO (0.5 mL per well) was added to dissolve the formazan crystals. Each of the 24 wells was transferred to a 96-well plate. The optical densities (ODs) of the resulting solutions were measured at 595 nm using an absorbance microplate reader (Infinite F50, TECAN, Männedorf, Switzerland). Cells that had not been subjected to treatment with the compounds were used as the control. The cell viability percentage (%) was calculated from the expression OD sample /OD control .

Real-Time Quantitative Polymerase Chain Reaction
Total RNA was isolated from the control and induced (Neurogenic) hMSCs and quantified with a spectrophotometer (NanoPhotometer™ Pearl Design Edition, Westlake Village, CA, USA). Complementary DNA (cDNA) was synthesized from the total purified RNA (1 µg) using a MMLV High-Performance Reverse Transcriptase kit with a 10 µM OligodT primer at 37 • C for 1 h. The RT-qPCR reaction was achieved with cDNA quantified with 2 × SYBR Green supermix supplemented with 10 µM of specific primers set ( Table 1). The RT-qPCR reaction was carried out with initial denaturation at 95 • C for 10 min, followed by 40 cycles of PCR at 95 • C for 15 s, and 60 • C for 60 s. Table 1. List of primers used in RT-qPCR.

Gene
Primer Sequence Product Size (bp)

Conclusions
In summary, we have designed and synthesized newly aromatic peptide amphiphiles of Ben-IKVAV and PFB-IKVAV. We systematically investigated the self-assembly, microscopic morphology, mechanical, and photophysical properties by using transmission electron microscopy, rheology, UV-vis absorption, fluorescence, circular dichroism, and Fourier-transform infrared spectroscopy. It was found that both compounds displayed order π-π interactions and β-sheet structures in the assemblies, especially PFB-IKVAV. Our findings demonstrate the importance of the amphiphilic molecular design of self-assembled supramolecular nanomaterials. The cytotoxicity of human mesenchymal stem cells and cell differentiation studies was also performed, indicating that PFB-IKVAV is a potential biomaterial opening new perspectives for future investigations into tissue engineering and regenerative medicine.
Supplementary Materials: The following supporting information can be downloaded at: https: //www.mdpi.com/article/10.3390/molecules27134115/s1, Figure S1: FT-IR spectra of (A) Ben-IKVAV and (B) PFB-IKVAV at a concentration of 5000 µM in water; Figure S2: The optical microscope images of cell morphology of hMSCs cultured with basal medium (control), basal medium in the presence of Ben-IKVAV, and basal medium in the presence of PFB-IKVAV for 2 days and 7 days (scale bar: 50 µm); Figure S3