Synthesis of Biologically Relevant 1,2,3- and 1,3,4-Triazoles: From Classical Pathway to Green Chemistry

Green Chemistry has become in the last two decades an increasing part of research interest. Nonconventional «green» sources for chemical reactions include micro-wave, mechanical mixing, visible light and ultrasound. 1,2,3-triazoles have important applications in pharmaceutical chemistry while their 1,2,4 counterparts are developed to a lesser extent. In the review presented here we will focus on synthesis of 1,2,3 and 1,2,4-triazole systems by means of classical and « green chemistry » conditions involving ultrasound chemistry and mechanochemistry. The focus will be on compounds/scaffolds that possess biological/pharmacophoric properties. Finally, we will also present the formal cycloreversion of 1,2,3-triazole compounds under mechanical forces and its potential use in biological systems.


Introduction
One of the main goals in the area of organic synthesis oriented towards biologically active compounds is the research and development of efficient environmentally safe methods. In fact, since the 2000s many regulations for the chemical and pharmaceutical industries have appeared, especially in terms of efficiency, waste management and energy input. All these issues are now addressed and termed «Green Chemistry», a multifaceted field dealing with what we call the twelve principles of P.T. Anastas and J.C. Warner [1]. Most important of them are: atom economy, preventing the use of solvents volatile and/or toxic, minimize chemical waste and minimize energy [2]. Organic reactions and processes are classically conducted in solutions (mostly organic) under reflux or thermal energy to be balanced at the end of the transformation. We focus on the Green Chemistry synthetic aspects, and focus on chemical reactions by using alternative energy sources that appeared and developed since the last two decades; namely, the processes: photochemistry through light excitation, microwave, sonochemistry irradiation, and mechanochemistry [3].
In this article, in order to give an emblematic example of the evolution of synthesis strategies towards ever greener processes, in particular in the pharmaceutical field, we will focus not only on recent classical synthesis of 1,2,3 and 1,2,4-triazoles, but also on sonochemistry and mechanochemical synthesis of these systems in relation to their biological activities. First, we will initially focus on these two alternative energy sources, i.e., sonochemistry/ultrasonic irradiation, and mechanochemistry. Mechanical effects caused by sound irradiation-called sonochemistry-can be applied to liquids. It can induce formation and growth of acoustic cavitations resulting in implosive bubble collapse [4][5][6]. This leads to intense compressional heating and extremely high pressures in the resultant so called hot spots (5000 K, 1000 atmospheres) while heating and cooling rates are exceeding 10 10 K s −1 (Figure 1) [7,8]. The sonic spectrum ranges from high power to low power ultrasound (20 KHz to 10 MHz). The range from 20 KHz to 1 MHz is used in sonochemistry. As indicated before, ultrasound irradiation can induce formation and growth of acoustic cavitations resulting in implosive bubble collapse that due to their physical properties can substantially improve chemical reactions (catalytic or not) in terms of speed (in some reactions a million fold reactivity increase was observed), selectivity and yield. Ultrasound reactions are not adequate for reactions between solids or solid-gas systems [9]. Ultrasound in organic synthesis has been studied considerably in the past two decades. Especially, various named organic transformations effected through ultrasound irradiation were developed. Among the most important [10] we can point to the coupling reactions, i.e., Heck, Suzuki, Sonogashira, Ullmann, ultrasound-assisted phase transfer catalysis, some named reactions like Reformatsky, Michael, Baylis-Hillmann, but also oxidation/reduction reactions, halogenations. Finally, ultrasound synthesis of ionic liquids and heterocyclic, especially nitrogen contained compounds [11], has gained much success and development. Mechanical energy can also induce chemical transformations [10]. According to IUPAC, a mechanochemical reaction is a "Chemical reaction that is induced by the direct absorption of mechanical energy" [12,13]. Wilhelm Ostwald (Nobel Prize in 1909), was the first who mentioned the term "Mechanochemistry" and defined it as a "branch of chemistry which is concerned with chemical and physico-chemical changes of substances of all states of aggregation due to the influence of mechanical energy". It is important to mention the pioneering work of Boldyrev et al., on the mechanisms and kinetics in comminuting devices [14][15][16], serving as a basis for many mechanochemical works. How the absorption of mechanical energy induces chemical transformations in terms of mechanistic understanding is still under investigation and not fully elucidated. Various models were proposed based on solid chemistry knowledge, like "hot spot" and "magma-plasma model" [17][18][19]. Other also well-known models (spherical, kinetic and impulse . . . ) were equally proposed [20,21]. Many efforts were developed recently towards a mechanistic level understanding of mechanochemical processes [22]. One of the major trends in progress is to research possible links between the mechanical effect and the action of the forces generated at the molecular level [23][24][25][26][27]. In parallel with these recent advances, the topic is still subject to research from the experimental and theoretical points of view [28]. In terms of the experimental view, the traditional grinding by using a mortar and a pestle has been replaced by more sophisticated ball-milling or mechano-milling techniques that are generally conducted in vibration mills or planetary mills at frequencies of 5-60 Hz. The reactions are generally carried out in vessels or jars of different kinds of materials (stainless steel, tungsten carbide, zirconia, agate, etc.). In recent years a deviation from the pure solid status of reactants, named the liquid assisted grinding, gained considerable interest because it offers opportunities to mechanochemistry to reach viable results in comparison to solution synthesis [29,30]. These studies are greatly facilitated by a possible continuous monitoring of mechanochemical reactions [31,32]. One drawback for mechanochemistry is the fact that up to now difficulties exist in practically controlling the air and moisture sensitive reagents. However, Kubota et al. have shown recently [33] that mechanochemistry allows carrying out the syntheses of organometallics sensitive to humidity in air.
In the two last decades, this green chemistry approach has been developed considerably in areas related to inorganic compounds and metal complexes synthesis and related mechanistic aspects [34][35][36] while less interest was focused on organic mechanochemistry, even after the pioneering work reported by Toda in the 1980s [37] and Kaupp [38]. This is actually changing since the last decade's focus was essentially on the green chemistry and green processes approach [39]. In recent times, mechanochemical synthetic approaches for creating carbon-carbon, carbon-heteroatom, metal-ligand coordination bonds etc. became important issues and gained considerable attention in the literature [40,41], and many applications were carried out in the field of organic mechanochemistry [42][43][44][45][46][47][48][49][50][51][52]. Among the many heterocyclic ring structures, especially nitrogen-contained, which were found and/or designed as important scaffolds for inducing biological effects are the triazoles. Triazole is a five membered ring with three nitrogen and two carbon atoms. Depending on the disposition of the five atoms, triazoles exist in two isomeric forms, namely 1,2,3-and 1,2,4-triazoles. Triazoles have become increasingly popular between medicinal chemists and pharmaceutical companies due essentially to their unique properties such as: rigidity, strong hydrogen-bond properties, stability under in vivo, and interesting pharmacokinetic profiles. Due to their importance, much literature data exist for 1,2,3-triazole systems in comparison to the 1,2,4-triazoles concerning either their syntheses or their biological activities see for instance [53][54][55]. In that respect the review presented here focuses on three recent parts, namely: (a) Construction of 1,2,3-triazole systems in biologically relevant compounds by means of classical and "green chemistry" conditions involving ultrasound chemistry and mechanochemistry. (b) Construction of 1,2,4-triazole systems in biologically relevant compounds by means of classical and "green chemistry" conditions involving ultrasound chemistry and mechanochemistry. (c) The mechanochemical cyclo-reversion of 1,2,3-triazole compounds and the scientific discussion on the topic that it could be extremely stimulating as mechanochemistry seems to provide a method by which reactive azide or alkyne intermediates could be selectively unmasked.
Molecules 2021, 26, x FOR PEER REVIEW In the two last decades, this green chemistry approach has been developed erably in areas related to inorganic compounds and metal complexes synthesis lated mechanistic aspects [34][35][36] while less interest was focused on organic m chemistry, even after the pioneering work reported by Toda in the 1980s [37] and [38]. This is actually changing since the last decade's focus was essentially on th chemistry and green processes approach [39]. In recent times, mechanochemi thetic approaches for creating carbon-carbon, carbon-heteroatom, metal-ligand nation bonds etc. became important issues and gained considerable attention in erature [40,41], and many applications were carried out in the field of organic m chemistry [42][43][44][45][46][47][48][49][50][51][52]. Among the many heterocyclic ring structures, especiall

1,2,3-Triazole Systems
One of the most important five-membered heterocyclic scaffolds due to its extensive biological activity is the 1,2,3-triazole one. The framework can be readily obtained through the click chemistry via reaction of an aryl/alkyl halide, alkynes and NaN 3 . Many synthetic methodologies were developed the past few decades, usually partitioned between metalfree and metal catalysed approaches, thus offering new opportunities for introduction of this valuable moiety to biologically relevant compounds designed and developed by medicinal chemists (Figure 1). A very recent review treats on those methodologies and on the medicinal attributes of 1,2,3-triazoles [56].
We report here notable current examples (year 2018) of classical synthesis of biologically active compounds bearing this frame, but also recent literature from 2014 concerning synthesis of 1,2,3-triazoles by chemical transformations using alternative energy sources (ultrasonic irradiation).
through the click chemistry via reaction of an aryl/alkyl halide, alkynes and NaN3. Many synthetic methodologies were developed the past few decades, usually partitioned be tween metal-free and metal catalysed approaches, thus offering new opportunities fo introduction of this valuable moiety to biologically relevant compounds designed and developed by medicinal chemists (Figure 1). A very recent review treats on those meth odologies and on the medicinal attributes of 1,2,3-triazoles [56].
We report here notable current examples (year 2018) of classical synthesis of bio logically active compounds bearing this frame, but also recent literature from 2014 con cerning synthesis of 1,2,3-triazoles by chemical transformations using alternative energy sources (ultrasonic irradiation).
Alexandre et al. reported in 2018 [57] that compounds based on 4-amino-1,2,3-triazole core as potent inhibitors of indoleamine 2,3-dioxygenase (IDO1 are important targets of immuno-oncology research. The authors screened on a recom binant human IDO1 a library of 350,000 compounds and were able to identify a series bearing the 4-amino-1,2,3-triazole core. Upon chemistry optimisation they obtained compound N-(4-chlorophenyl)-2H-1,2,3-triazol-4-amine with a remarkable potency (IC5 of 0.023 μM) substantially more potent than any other IDO1 inhibitor. Synthesis of thi compound differs from all other methods. The synthesis involves diazotization o 4-chloroaniline 1 by sodium nitrite followed by reaction with 2-aminoacetonitrile hy drochloride 2 in order to afford 2-(2-(4-chlorophenyl) iminohydrazino) acetonitrile 3 which upon heating under reflux in ethanol afforded the desired compound 4 (Scheme 1). Wu et al. [58] reported the design and synthesis of tacrine 1,2,3-triazole derivatives as potent cholinesterase inhibitors. Tacrine 5, the first drug approved by the FDA tha binds at the catalytic active site (CAS) region a potent non selective inhibitor of both bAChE and hBChE was hybridized through various types of linkers bearing the 1,2,3-triazole frame with the chloroquinoline scaffold. Starting from indoline-2,3-dione 6 the authors obtained in a four step procedure the key tetrahydroacridine intermediates 7 bearing various terminal alkynes. After introduction of an azide functionality in the chloroquinoline scaffold 8 the partners were coupled via CuAAC reaction giving com pounds 9 (Scheme 2). Wu et al. [58] reported the design and synthesis of tacrine 1,2,3-triazole derivatives as potent cholinesterase inhibitors. Tacrine 5, the first drug approved by the FDA that binds at the catalytic active site (CAS) region a potent non selective inhibitor of both bAChE and hBChE was hybridized through various types of linkers bearing the 1,2,3-triazole frame with the chloroquinoline scaffold. Starting from indoline-2,3-dione 6, the authors obtained in a four step procedure the key tetrahydroacridine intermediates 7 bearing various terminal alkynes. After introduction of an azide functionality in the chloroquinoline scaffold 8 the partners were coupled via CuAAC reaction giving compounds 9 (Scheme 2). Among all compounds synthetized, compound 9 (R = H, linker = piperazine) exh ited a potent inhibition against AChE and BChE with IC50 values of 4.89 and 3.61 μ respectively. The authors point out that although this compound is less potent than crine, it has a unique binding mode at both CAS and also to the peripheral anionic s (PAS), as well as less toxicity. They concluded by considering it as a lead compound th respectively. The authors point out that although this compound is less potent than tacrine, it has a unique binding mode at both CAS and also to the peripheral anionic site (PAS), as well as less toxicity. They concluded by considering it as a lead compound that could be the basis for the development of more active dual inhibitors of AChE and BChE (Table 1). Among all compounds synthetized, compound 9 (R = H, linker = pipe ited a potent inhibition against AChE and BChE with IC50 values of 4.89 respectively. The authors point out that although this compound is less p crine, it has a unique binding mode at both CAS and also to the peripher (PAS), as well as less toxicity. They concluded by considering it as a lead c could be the basis for the development of more active dual inhibitors of AC (Table 1). Ashok et al. [59] reported the synthesis of a novel prototype tha chromene and a 1,2,3-triazole pharmocophore frame with activities agains sis. The strategy adopted by the authors for their synthesis started from su tophenone 10 which upon Kabbe condensation and reduction of the carbo forded spirochromanols 11. Deprotection of 11 and dehydration provid sponding spirochromene 12. 1,2,3-triazole-fused spirochromene derivative obtained through a Huisgen cycloaddition in the presence of pyrrolidi (Scheme 3).

Compounds
Inhibition ( Ashok et al. [59] reported the synthesis of a novel prototype that possessed a chromene and a 1,2,3-triazole pharmocophore frame with activities against M. tuberculosis. The strategy adopted by the authors for their synthesis started from substituted acetophenone 10 which upon Kabbe condensation and reduction of the carbonyl group afforded spirochromanols 11. Deprotection of 11 and dehydration provided the corresponding spirochromene 12. 1,2,3-triazole-fused spirochromene derivatives 13 were then obtained through a Huisgen cycloaddition in the presence of pyrrolidine as catalyst (Scheme 3).
Among the compounds tested against M. tuberculosis H37Rv strain, 5 compounds presented strong MIC activities (between 4 and 9 μM). Their cytotoxicity against RAW 264.7 cells was determined and indicated at least one log difference in comparison to their MIC values. These findings indicated that 1,2,3-triazole-fused spirochromene derivatives can have biological significance for further development (Table 2).  Among the compounds tested against M. tuberculosis H37Rv strain, 5 compounds presented strong MIC activities (between 4 and 9 µM). Their cytotoxicity against RAW 264.7 cells was determined and indicated at least one log difference in comparison to their MIC values. These findings indicated that 1,2,3-triazole-fused spirochromene derivatives can have biological significance for further development ( Table 2). López-Rojas et al. [60] reported the synthesis of 4-substituted 1,2,3-triazole coumarinderivatives and evaluated their antimicrobial activity. The strategy adopted by the authors was the synthesis of acetylenic O-15 or N-propargylated 17 coumarins starting from 4-hydroxy 14 and 4-bromo 16 coumarin respectively. Copper(I) catalyzed Huisgen 1,3dipolar cycloaddition reaction with synthetized (or commercially available) alkyl or aryl azides and afforded the desired compounds 18 (Scheme 4).
their MIC values. These findings indicated that 1,2,3-triazole-fused spirochromene d rivatives can have biological significance for further development ( Table 2). López-Rojas et al. [60] reported the synthesis of 4-substituted 1,2,3-triazole coum rin-derivatives and evaluated their antimicrobial activity. The strategy adopted by t authors was the synthesis of acetylenic O-15 or N-propargylated 17 coumarins starti from 4-hydroxy 14 and 4-bromo 16 coumarin respectively. Copper(I) catalyzed Huisg 1,3-dipolar cycloaddition reaction with synthetized (or commercially available) alkyl aryl azides and afforded the desired compounds 18 (Scheme 4).  We will refer herein to some relevant publications from 2014 up to now. In 2014, Mady et al. [61] reported the ultrasound assisted synthesis of diaryl sulfones bearing 1,2,3-triazole moieties as potential antioxidant and antimicrobial agents. Synthesis of disubstituted triazoles is depicted below (Scheme 5). The authors explored three routes: a stepwise approach that allowed a click coupling of two different azides and a second and third one where both alkynes were introduced then allowed to click from the same azide. with different azides under ultrasound conditions affording a first 1,2,3-triazole containing compound 20. The hydroxy group can be further propargylated and coupled with other azides (or the same), affording final compounds 23.
The second route introduces first a second alkyne group via propargylation of the hydroxy group of key sulfone 21 and then CuAAC cycloaddition reaction with the corresponding azide. All syntheses were operated under ultrasound conditions in a very efficient manner. The authors also synthetized bis-triazoles via the one-pot click reaction (third route). Scheme 5. Synthesis of mono and bis-1,2,3-triazoles, respectively 20 and 23. The second route introduces first a second alkyne group via propargylation of the hydroxy group of key sulfone 21 and then CuAAC cycloaddition reaction with the corresponding azide. All syntheses were operated under ultrasound conditions in a very efficient manner. The authors also synthetized bis-triazoles via the one-pot click reaction (third route).
Biological and antioxidant activities of all compounds were also reported. Many of them were found to be most potent antifungal agents with MIC values around 25 µg/mL (Table 4). Moreover, compound 24 (Scheme 6) showed an excellent antioxidant activity (IC 50 = 20 µg/mL) using a DPPH free radical scavenging assay. Nallapati et al. reported in 2015 [62] synthesis of 1,2,3-triazoles derived from olanzapine. Olanzapine (Zyprexa), a member of the thienobenzodiazepine class, is a confirmed marketed drug used for the treatment of schizophrenia and bipolar disorder. The authors describe modifications of olanzapine and explore their activities. One of the target molecules chosen by the authors being olanzapine decorated with 1,2,3-triazole moieties. In that respect alkyne 26 was first prepared through classical coupling in the presence of NaH of propargyl bromide with the drug olanzapine 25 in THF. The thus prepared alkyne reacted with aryl or alkyl azides at room temperature under ultrasound irradiation and in the presence of diisopropylethylamine affording the triazolo derivatives 27 in fairly good yields (Scheme 7). The authors reported in vitro activities of these compounds against phosphodiesterase 4B protein (PDE4B), a gene family that plays a role in the treatment of schizophrenia. Three of the compounds tested were identified as selective inhibitors of PDE4B (IC50 5 to 6 μM) ( Table 5). Nallapati et al. reported in 2015 [62] synthesis of 1,2,3-triazoles derived from olanzapine. Olanzapine (Zyprexa), a member of the thienobenzodiazepine class, is a confirmed marketed drug used for the treatment of schizophrenia and bipolar disorder. The authors describe modifications of olanzapine and explore their activities. One of the target molecules chosen by the authors being olanzapine decorated with 1,2,3-triazole moieties. In that respect alkyne 26 was first prepared through classical coupling in the presence of NaH of propargyl bromide with the drug olanzapine 25 in THF. The thus prepared alkyne reacted with aryl or alkyl azides at room temperature under ultrasound irradiation and in the presence of diisopropylethylamine affording the triazolo derivatives 27 in fairly good yields (Scheme 7).  [62] synthesis of 1,2,3-triazoles derived from olanzapine. Olanzapine (Zyprexa), a member of the thienobenzodiazepine class, is a confirmed marketed drug used for the treatment of schizophrenia and bipolar disorder. The authors describe modifications of olanzapine and explore their activities. One of the target molecules chosen by the authors being olanzapine decorated with 1,2,3-triazole moieties. In that respect alkyne 26 was first prepared through classical coupling in the presence of NaH of propargyl bromide with the drug olanzapine 25 in THF. The thus prepared alkyne reacted with aryl or alkyl azides at room temperature under ultrasound irradiation and in the presence of diisopropylethylamine affording the triazolo derivatives 27 in fairly good yields (Scheme 7). The authors reported in vitro activities of these compounds against phosphodiesterase 4B protein (PDE4B), a gene family that plays a role in the treatment of schizophrenia. Three of the compounds tested were identified as selective inhibitors of PDE4B (IC50 5 to 6 μM) ( Table 5). The authors reported in vitro activities of these compounds against phosphodiesterase 4B protein (PDE4B), a gene family that plays a role in the treatment of schizophrenia. Three of the compounds tested were identified as selective inhibitors of PDE4B (IC 50 5 to 6 µM) ( Table 5). N. Rezki reported in 2015 [63] synthesis under conventional methods and ultrasound conditions of 1,4 disubstituted 1,2,3-triazoles tethering bioactive benzothiazole nucleus and their antibacterial evaluation. Synthesis (Scheme 8) started from 2-aminobenzothiazole derivatives 28 which were acylated upon reaction with bromoacetylbromide. Then, azidation in the presence of sodium azide afforded the corresponding azidobenzothiazoles 29. All reactions were performed under classical and ultrasound conditions with better yields in the latter case. Huisgen copper(I) catalysed 1,3-dipolar cycloaddition with appropriate terminal alkynes in the presence of sodium ascorbate in tBuOH/H 2 O, and was carried out under heat or use of ultrasound at room temperature affording compounds 30. Again, ultrasound conditions revealed to be more favorable. sponding azidobenzothiazoles 29. All reactions were performed under classical and ultrasound conditions with better yields in the latter case. Huisgen copper(I) catalysed 1,3-dipolar cycloaddition with appropriate terminal alkynes in the presence of sodium ascorbate in tBuOH/H2O, and was carried out under heat or use of ultrasound at room temperature affording compounds 30. Again, ultrasound conditions revealed to be more favorable. All compounds were tested against three gram positive and three gram negative bacteria and two fungal strains. Some of them, revealed promising activities in the range of 4-8 μg/mL ( Table 6). N. Rezki and M.R. Aouad reported in 2017 [64] synthesis of hybrid compounds bearing fluorinated 1,2,4-triazole, 1H-1,2,3-triazole and also a benzothiazole functionality. Construction of the 1,2,4-triazole substituted frame started from reaction of 2-fluorobenzoyl chloride 31 with hydrazine hydrate.
Subsequent treatment was administered with diverse alkyl/aryl isothiocyanates, which upon basic reaction conditions underwent an oxidative ring closure affording the thione derivatives 32. The latter reacted with propargyl bromide in the presence of triethylamine under ultrasound conditions, furnishing the thiopropargylated 1,2,4-triazole precursors 33 required for the click reaction. On the other hand, acylation of the appropriate 2-aminobenzothiazoles 34 followed by the azidolysis reaction allowed obtention of the azidoacetamide derivative 35. The Huisgen cycloaddition reaction was then performed between the two coupling reagents in the presence of CuSO4 and Na-ascorbate as catalysts in DMSO-H2O. The ultrasound conditions were less time consuming and much more efficient with almost quantitative yields (Scheme 9). All compounds were tested against three gram positive and three gram negative bacteria and two fungal strains. Some of them, revealed promising activities in the range of 4-8 µg/mL (Table 6). N. Rezki and M.R. Aouad reported in 2017 [64] synthesis of hybrid compounds bearing fluorinated 1,2,4-triazole, 1H-1,2,3-triazole and also a benzothiazole functionality. Construction of the 1,2,4-triazole substituted frame started from reaction of 2-fluorobenzoyl chloride 31 with hydrazine hydrate.
Subsequent treatment was administered with diverse alkyl/aryl isothiocyanates, which upon basic reaction conditions underwent an oxidative ring closure affording the thione derivatives 32. The latter reacted with propargyl bromide in the presence of triethylamine under ultrasound conditions, furnishing the thiopropargylated 1,2,4-triazole precursors 33 required for the click reaction. On the other hand, acylation of the appropriate 2-aminobenzothiazoles 34 followed by the azidolysis reaction allowed obtention of the azidoacetamide derivative 35. The Huisgen cycloaddition reaction was then performed between the two coupling reagents in the presence of CuSO 4 and Na-ascorbate as catalysts in DMSO-H 2 O. The ultrasound conditions were less time consuming and much more efficient with almost quantitative yields (Scheme 9).
Almost all compounds showed activities with MIC values in the range 6.45-33.2 µmol/L against S. pneumoniae. In addition, compound 37 ( Figure 2) showed the strongest antifungal activities among all compounds with MIC values of 6.45 µmol/L against A. fumigatus and C. albicans.

Mechanochemical Syntheses of 1,2,3-Triazoles
Praveen et al. reported in 2017 [65] the synthesis of new hybrid pharmacophores under ball milling conditions through two well established named reactions, namely a Baylis-Hillman [66] and a Huisgen's click chemistry [67]. The authors aimed to prepare potential medicinal targets bearing a 3-substituted-3-hydroxy-2-oxindole frame present in many natural products and medicinal agents [68][69][70] and a 1,2,3-triazole scaffold. The authors successfully combined a Baylis-Hillman and a click reaction by using DABCO as a base and copper oxide nanoparticles as catalysts. By milling together a mixture of N-propargyl isatin, N-methylmaleimide, benzyl azide, DABCO in the presence of CuONP catalyst (5%) they were able to find optimal conditions of achieving the synthesis of the target compound 38a in 96% of yield (Scheme 10). Almost all compounds showed activities with MIC values in the range 6.45-33.2 μmol/L against S. pneumoniae. In addition, compound 37 ( Figure 2) showed the strongest antifungal activities among all compounds with MIC values of 6.45 μmol/L against A. fumigatus and C. albicans.

Mechanochemical Syntheses of 1,2,3-Triazoles
Praveen et al. reported in 2017 [65] the synthesis of new hybrid pharmacophores under ball milling conditions through two well established named reactions, namely a Baylis-Hillman [66] and a Huisgen's click chemistry [67]. The authors aimed to prepare potential medicinal targets bearing a 3-substituted-3-hydroxy-2-oxindole frame present in many natural products and medicinal agents [68][69][70] and a 1,2,3-triazole scaffold. The authors successfully combined a Baylis-Hillman and a click reaction by using DABCO as a base and copper oxide nanoparticles as catalysts. By milling together a mixture of N-propargyl isatin, N-methylmaleimide, benzyl azide, DABCO in the presence of CuONP catalyst (5%) they were able to find optimal conditions of achieving the synthesis of the target compound 38a in 96% of yield (Scheme 10).

Mechanochemical Syntheses of 1,2,3-Triazoles
Praveen et al. reported in 2017 [65] the synthesis of new hybrid pharmacophores under ball milling conditions through two well established named reactions, namely a Baylis-Hillman [66] and a Huisgen's click chemistry [67]. The authors aimed to prepare potential medicinal targets bearing a 3-substituted-3-hydroxy-2-oxindole frame present in many natural products and medicinal agents [68][69][70] and a 1,2,3-triazole scaffold. The authors successfully combined a Baylis-Hillman and a click reaction by using DABCO as a base and copper oxide nanoparticles as catalysts. By milling together a mixture of N-propargyl isatin, N-methylmaleimide, benzyl azide, DABCO in the presence of CuONP catalyst (5%) they were able to find optimal conditions of achieving the synthesis of the target compound 38a in 96% of yield (Scheme 10). They then applied the conditions found for creating a small focused library (Table 7) as their methodology and accommodated a large variety of substituted starting compounds. In addition, the authors proved the recyclability of the catalyst and its total re-Scheme 10. Mechanochemical synthesis of oxindole-triazole hybrid pharmacophores 38.
They then applied the conditions found for creating a small focused library (Table 7) as their methodology and accommodated a large variety of substituted starting compounds. In addition, the authors proved the recyclability of the catalyst and its total recovery. Biological studies along with molecular docking demonstrated the rational efficiency of the compounds as antibacterial and antifungal. The best activities were found for compound 38m (Figure 3), which was most active against S. aureus (with a MIC value of 16 µg mL −1 ), for compounds 38a.d,i,l active against E. coli and for compounds 38e,h,k,m,p active against C. albicans.   [71] the synthesis of quinine-triazole systems with aim to find new compounds via molecular hybridization [72] that can be addresse two antiprotozoal targets that are malaria and leichmaniosis [72,73]. The synthetic r (Scheme 11) started with activation through mesylation of the secondary alcohol of nine generating the compound 39 and subsequent substitution with the azide group v solution-based methodology [74]. The generated azido dehydroxyquinine 40 was allowed to react via a copper catalyzed cycloaddition reaction with a variety of alky These reactions were carried out under mechanochemical conditions in ball mill at rpm, affording the triazolyl compounds 41 in 45% to 91% yields (Table 8). Screening sults showed that from the 19 synthetized compounds, 5 showed significant antimal and antileichmanial activities ( Table 8) and four of them did not reveal any in vivo dent animal model) toxic manifestation at doses as high as 1000 mg/Kg.  [71] the synthesis of quinine-triazole systems with the aim to find new compounds via molecular hybridization [72] that can be addressed to two antiprotozoal targets that are malaria and leichmaniosis [72,73]. The synthetic route (Scheme 11) started with activation through mesylation of the secondary alcohol of quinine generating the compound 39 and subsequent substitution with the azide group via a solution-based methodology [74]. The generated azido dehydroxyquinine 40 was then allowed to react via a copper catalyzed cycloaddition reaction with a variety of alkynes. These reactions were carried out under mechanochemical conditions in ball mill at 300 rpm, affording the triazolyl compounds 41 in 45% to 91% yields (Table 8). Screening results showed that from the 19 synthetized compounds, 5 showed significant antimalarial and antileichmanial activities ( Table 8) and four of them did not reveal any in vivo (rodent animal model) toxic manifestation at doses as high as 1000 mg/Kg. allowed to react via a copper catalyzed cycloaddition reaction with a variety of These reactions were carried out under mechanochemical conditions in ball mi rpm, affording the triazolyl compounds 41 in 45% to 91% yields (Table 8). Scree sults showed that from the 19 synthetized compounds, 5 showed significant anti and antileichmanial activities ( Table 8) and four of them did not reveal any in v dent animal model) toxic manifestation at doses as high as 1000 mg/Kg. Scheme 11. Synthesis of triazolyl compounds from Quinine.  Toxicity Profile NOAEL (mg/kg) a (Scheme 11) started with activation through mesylation of the secondary alcohol of quinine generating the compound 39 and subsequent substitution with the azide group via a solution-based methodology [74]. The generated azido dehydroxyquinine 40 was then allowed to react via a copper catalyzed cycloaddition reaction with a variety of alkynes. These reactions were carried out under mechanochemical conditions in ball mill at 300 rpm, affording the triazolyl compounds 41 in 45% to 91% yields (Table 8). Screening results showed that from the 19 synthetized compounds, 5 showed significant antimalarial and antileichmanial activities ( Table 8) and four of them did not reveal any in vivo (rodent animal model) toxic manifestation at doses as high as 1000 mg/Kg. Scheme 11. Synthesis of triazolyl compounds from Quinine. (Scheme 11) started with activation through mesylation of the secondary alcohol of quinine generating the compound 39 and subsequent substitution with the azide group via a solution-based methodology [74]. The generated azido dehydroxyquinine 40 was then allowed to react via a copper catalyzed cycloaddition reaction with a variety of alkynes. These reactions were carried out under mechanochemical conditions in ball mill at 300 rpm, affording the triazolyl compounds 41 in 45% to 91% yields (Table 8). Screening results showed that from the 19 synthetized compounds, 5 showed significant antimalarial and antileichmanial activities ( Table 8) and four of them did not reveal any in vivo (rodent animal model) toxic manifestation at doses as high as 1000 mg/Kg.

Scheme 11.
Synthesis of triazolyl compounds from Quinine. (Scheme 11) started with activation through mesylation of the secondary alcohol of quinine generating the compound 39 and subsequent substitution with the azide group via a solution-based methodology [74]. The generated azido dehydroxyquinine 40 was then allowed to react via a copper catalyzed cycloaddition reaction with a variety of alkynes. These reactions were carried out under mechanochemical conditions in ball mill at 300 rpm, affording the triazolyl compounds 41 in 45% to 91% yields (Table 8). Screening results showed that from the 19 synthetized compounds, 5 showed significant antimalarial and antileichmanial activities ( Table 8) and four of them did not reveal any in vivo (rodent animal model) toxic manifestation at doses as high as 1000 mg/Kg.

Scheme 11.
Synthesis of triazolyl compounds from Quinine.  [75] the synthesis of 1,2,3-triazole tethered 3-hydroxy-2-oxindoles under ball milling conditions (Scheme 12) as corrosion inhibitors and antimicrobials. 3-Functionalized oxindoles can be obtained from the valuable heterocyclic scaffolds isatins. Among the different 3-substituted oxindoles, the 3-hydroxy-3-substituted-2-oxindoles are present in many natural products [76]. In addition, they are considered as valuable key intermediates in organic synthesis [77][78][79], leading to compounds with pronounced pharmaceutical properties [80][81][82]. The authors synthetized a set of new derivatives of this family by combining an aldol condensation and a click reaction using ball milling conditions. A mixture of N-propargyl isatin, acetophenone, benzyl azide in the presence of DABCO and copper oxide nanoparticles CuONPs (2.5 mol%) was reacted in a ZrO2 jar material at a speed of 400 rpm, affording the desired products 42 in 87% to 92% yields, except for azide possessing the strong electron withdrawing NO2 group (80% yield). Among the compounds synthetized, derivative 42b displayed a remarkable corrosion inhibition potency (for corrosion inhibition in acidic media see references [83,84]), while compound 42a showed appreciable antifungal (C. albicans) and antibacterial (S. aureus) effects (Table 9). The authors consider that the biological results are quite encouraging for triggering a detailed structure-activity study and the comprehension of their activity.  [75] the synthesis of 1,2,3-triazole tethered 3-hydroxy-2-oxindoles under ball milling conditions (Scheme 12) as corrosion inhibitors and antimicrobials. 3-Functionalized oxindoles can be obtained from the valuable heterocyclic scaffolds isatins. Among the different 3-substituted oxindoles, the 3-hydroxy-3-substituted-2-oxindoles are present in many natural products [76]. In addition, they are considered as valuable key intermediates in organic synthesis [77][78][79], leading to compounds with pronounced pharmaceutical properties [80][81][82]. The authors synthetized a set of new derivatives of this family by combining an aldol condensation and a click reaction using ball milling conditions. A mixture of N-propargyl isatin, acetophenone, benzyl azide in the presence of DABCO and copper oxide nanoparticles CuONPs (2.5 mol%) was reacted in a ZrO2 jar material at a speed of 400 rpm, affording the desired products 42 in 87% to 92% yields, except for azide possessing the strong electron withdrawing NO2 group (80% yield). Among the compounds synthetized, derivative 42b displayed a remarkable corrosion inhibition potency (for corrosion inhibition in acidic media see references [83,84]), while compound 42a showed appreciable antifungal (C. albicans) and antibacterial (S. aureus) effects (Table 9). The authors consider that the biological results are quite encouraging for triggering a detailed structure-activity study and the comprehension of their activity.  [75] the synthesis of 1,2,3-triazole tethered 3-hydroxy-2-oxindoles under ball milling conditions (Scheme 12) as corrosion inhibitors and antimicrobials. 3-Functionalized oxindoles can be obtained from the valuable heterocyclic scaffolds isatins. Among the different 3-substituted oxindoles, the 3-hydroxy-3substituted-2-oxindoles are present in many natural products [76]. In addition, they are considered as valuable key intermediates in organic synthesis [77][78][79], leading to compounds with pronounced pharmaceutical properties [80][81][82]. The authors synthetized a set of new derivatives of this family by combining an aldol condensation and a click reaction using ball milling conditions. A mixture of N-propargyl isatin, acetophenone, benzyl azide in the presence of DABCO and copper oxide nanoparticles CuONPs (2.5 mol%) was reacted in a ZrO 2 jar material at a speed of 400 rpm, affording the desired products 42 in 87% to 92% yields, except for azide possessing the strong electron withdrawing NO 2 group (80% yield). Among the compounds synthetized, derivative 42b displayed a remarkable corrosion inhibition potency (for corrosion inhibition in acidic media see references [83,84]), while compound 42a showed appreciable antifungal (C. albicans) and antibacterial (S. aureus) effects ( Table 9). The authors consider that the biological results are quite encouraging for triggering a detailed structure-activity study and the comprehension of their activity. the desired products 42 in 87% to 92% yields, except for azide possessing the strong electron withdrawing NO2 group (80% yield). Among the compounds synthetized, derivative 42b displayed a remarkable corrosion inhibition potency (for corrosion inhibition in acidic media see references [83,84]), while compound 42a showed appreciable antifungal (C. albicans) and antibacterial (S. aureus) effects ( Table 9). The authors consider that the biological results are quite encouraging for triggering a detailed structure-activity study and the comprehension of their activity. Scheme 12. Synthesis of 1,2,3-Triazole Tethered 3-Hydroxy-2-oxindoles.

1,2,4-Triazole Systems
The 1,2,4-triazole-based biologically active compounds have found enormous applications in medicinal and agricultural sciences. A great number of drugs are extensively Scheme 12. Synthesis of 1,2,3-Triazole Tethered 3-Hydroxy-2-oxindoles. the desired products 42 in 87% to 92% yields, except for azide possessing the strong electron withdrawing NO2 group (80% yield). Among the compounds synthetized, derivative 42b displayed a remarkable corrosion inhibition potency (for corrosion inhibition in acidic media see references [83,84]), while compound 42a showed appreciable antifungal (C. albicans) and antibacterial (S. aureus) effects ( Table 9). The authors consider that the biological results are quite encouraging for triggering a detailed structure-activity study and the comprehension of their activity.

1,2,4-Triazole Systems
The 1,2,4-triazole-based biologically active compounds have found enormous applications in medicinal and agricultural sciences. A great number of drugs are extensively H the desired products 42 in 87% to 92% yields, except for azide possessing the strong electron withdrawing NO2 group (80% yield). Among the compounds synthetized, derivative 42b displayed a remarkable corrosion inhibition potency (for corrosion inhibition in acidic media see references [83,84]), while compound 42a showed appreciable antifungal (C. albicans) and antibacterial (S. aureus) effects ( Table 9). The authors consider that the biological results are quite encouraging for triggering a detailed structure-activity study and the comprehension of their activity. Scheme 12. Synthesis of 1,2,3-Triazole Tethered 3-Hydroxy-2-oxindoles.

1,2,4-Triazole Systems
The 1,2,4-triazole-based biologically active compounds have found enormous applications in medicinal and agricultural sciences. A great number of drugs are extensively 90 Anti-fungal Anti-bacterial b CuONPs (2.5 mol%) was reacted in a ZrO2 jar material at a speed of 400 rpm, affording the desired products 42 in 87% to 92% yields, except for azide possessing the strong electron withdrawing NO2 group (80% yield). Among the compounds synthetized, derivative 42b displayed a remarkable corrosion inhibition potency (for corrosion inhibition in acidic media see references [83,84]), while compound 42a showed appreciable antifungal (C. albicans) and antibacterial (S. aureus) effects ( Table 9). The authors consider that the biological results are quite encouraging for triggering a detailed structure-activity study and the comprehension of their activity. Scheme 12. Synthesis of 1,2,3-Triazole Tethered 3-Hydroxy-2-oxindoles.

1,2,4-Triazole Systems
The 1,2,4-triazole-based biologically active compounds have found enormous applications in medicinal and agricultural sciences. A great number of drugs are extensively

5-Me
CuONPs (2.5 mol%) was reacted in a ZrO2 jar material at a speed of 400 rpm, affording the desired products 42 in 87% to 92% yields, except for azide possessing the strong electron withdrawing NO2 group (80% yield). Among the compounds synthetized, derivative 42b displayed a remarkable corrosion inhibition potency (for corrosion inhibition in acidic media see references [83,84]), while compound 42a showed appreciable antifungal (C. albicans) and antibacterial (S. aureus) effects ( Table 9). The authors consider that the biological results are quite encouraging for triggering a detailed structure-activity study and the comprehension of their activity. Scheme 12. Synthesis of 1,2,3-Triazole Tethered 3-Hydroxy-2-oxindoles.

1,2,4-Triazole Systems
The 1,2,4-triazole-based biologically active compounds have found enormous applications in medicinal and agricultural sciences. A great number of drugs are extensively 92 Main activity (f.i.): Corrosion inhibition

1,2,4-Triazole Systems
The 1,2,4-triazole-based biologically active compounds have found enormous applications in medicinal and agricultural sciences. A great number of drugs are extensively used in clinics. Among them, we can point to the antifungal fluconazole 43, antitumoral letrozole 44, and the antiviral ribavirin 45, (Figure 4) [85], while several triazole based compounds play an important role in agriculture ensuring harvest and crops [86]. Their extensive medicinal, agrochemical potential, resulted in an overwhelming effort to develop synthetic methods that include three categories of synthetic objectives: (a) cyclizations to form the triazole ring, (b) transformations of heterocyclic compounds to construct the triazole ring, and (c) substitutions on the 1,2,4-triazole ring.  In this review, we discuss only some examples of the recent cyclization r with amidrazones and hydrazides. In addition, it is noteworthy to point out that t no reported methods to synthetize 1,2,4-triazole frames under green chemistry tions. We report here our first results concerning the mechanochemical organic s of a valuable annulated 1,2,4-triazole scaffold. In this review, we discuss only some examples of the recent cyclization reactions with amidrazones and hydrazides. In addition, it is noteworthy to point out that there are no reported methods to synthetize 1,2,4-triazole frames under green chemistry conditions. We report here our first results concerning the mechanochemical organic synthesis of a valuable annulated 1,2,4-triazole scaffold.

From Amidrazones
Amidrazones are the conjugated products of imines and hydrazines; their cyclisation with carbonyl compounds is one of the most important pathways to access 1,2,4triazole derivatives.
tions. We report here our first results concerning the mechanochemical org of a valuable annulated 1,2,4-triazole scaffold.

From Amidrazones
Amidrazones are the conjugated products of imines and hydrazines tion with carbonyl compounds is one of the most important pathw 1,2,4-triazole derivatives.
The authors took advantage of their methodology to create 3,5-diaryl-1,2,4-tria 55 starting from N 1 -arylidene-arenecarboxamidrazones 54. Reaction of the latter NBS/NH4OAc in AcOH (whatever the order) afforded triazoles 55, thus demonstr the general applicability of the method (Scheme 15). Among the different compounds synthetized and tested, it is noteworthy to out that compound 56 ( Figure 5) with an inhibition constant K i of 0.41 μM against r muscle glycogen phosphorylase could be considered as the starting point for the d opment of more potent compounds for pharmacological treatment, not only of dia but also wherever the regulation of glycogen metabolism plays a significant role (cer and cardiac ischemias, and tumor growth). Among the different compounds synthetized and tested, it is noteworthy to point out that compound 56 ( Figure 5) with an inhibition constant Ki of 0.41 µM against rabbit muscle glycogen phosphorylase could be considered as the starting point for the development of more potent compounds for pharmacological treatment, not only of diabetes but also wherever the regulation of glycogen metabolism plays a significant role (cerebral and cardiac ischemias, and tumor growth).
the general applicability of the method (Scheme 15). Among the different compounds synthetized and tested, it is n out that compound 56 ( Figure 5) with an inhibition constant K i of 0.4 muscle glycogen phosphorylase could be considered as the starting opment of more potent compounds for pharmacological treatment, n but also wherever the regulation of glycogen metabolism plays a signi and cardiac ischemias, and tumor growth). In 2018, Aly et al. [89] reported a general method for 1,3,5-trisubstituted 1,2,4-triazoles 59, 60 from reaction of amidrazon azodicarboxylate 58. The authors performed the coupling/cyclisatio N-arylamidrazones 57 and diethyl azodicarboxylate 58. The reacti under reflux in EtOH and catalyzed by a few drops of triethylamine allowing to get an easy access to the highly diverse triazoles 59, 60. T on oxidation of ethanol to acetaldehyde via the Mitsunobu reagent; amidrazones the substituted 3-methyltriazoles 59 could be obtained, cloaddition reaction between two oxidized forms of amidrazones pro

From Hydrazides
Several hydrazides are commercially available and the non-commercial o successfully prepared by the reaction of hydrazine with the corresponding ester sor. Up to now, a lot of works have been done concerning the cyclization of hydra their derivatives. Very recent work in relation to biological activities is presented In 2018, Singh et al. [90] reported the design and synthesis of new b 1,2,4-triazoles as potential antituberculosis and antimicrobial agents. In that resp synthetized a series of functionalized 1,2,4-triazole derivatives through the s scheme presented below (Scheme 17).

From Hydrazides
Several hydrazides are commercially available and the non-commercial ones are successfully prepared by the reaction of hydrazine with the corresponding ester precursor. Up to now, a lot of works have been done concerning the cyclization of hydrazides or their derivatives. Very recent work in relation to biological activities is presented here.
In 2018, Singh et al. [90] reported the design and synthesis of new bioactive 1,2,4triazoles as potential antituberculosis and antimicrobial agents. In that respect, they synthetized a series of functionalized 1,2,4-triazole derivatives through the synthetic scheme presented below (Scheme 17). their derivatives. Very recent work in relation to biological activities is presented here.
In 2018, Singh et al. [90] reported the design and synthesis of new bioactive 1,2,4-triazoles as potential antituberculosis and antimicrobial agents. In that respect, they synthetized a series of functionalized 1,2,4-triazole derivatives through the synthetic scheme presented below (Scheme 17). Isonicotinic acid hydrazide 61 was transformed to the potassium dithiocarbazinate 62 by reaction with carbon disulfide under basic conditions. Then, treatment with hydrazine hydrate under thermal conditions in water, afforded the 4-amino-1,2,4-triazole-3-thiol 63. The latter reacted on its 4-amino group to form various Schiff base compounds. Some of the compounds were found to have very potent antitubercular activities, even better than isoniazid and also against clinical isolates (Table  10). Synthetized compounds were also tested in vitro against representative bacterial and fungi strains, one compound has very potent activity against B.subtilis, while another one is very potent against A.niger and C. albicans fungi (Table 11). Isonicotinic acid hydrazide 61 was transformed to the potassium dithiocarbazinate 62 by reaction with carbon disulfide under basic conditions. Then, treatment with hydrazine hydrate under thermal conditions in water, afforded the 4-amino-1,2,4-triazole-3-thiol 63. The latter reacted on its 4-amino group to form various Schiff base compounds. Some of the compounds were found to have very potent antitubercular activities, even better than isoniazid and also against clinical isolates (Table 10). Synthetized compounds were also tested in vitro against representative bacterial and fungi strains, one compound has very potent activity against B.subtilis, while another one is very potent against A.niger and C. albicans fungi (Table 11). Sonawane et al. reported in 2017 [91] the synthesis of 1,2,4-triazole-3-thione derivatives as antimycobacterial agents. The two routes employed by the authors are outlined in Scheme 18. The acid chloride 66, prepared by reacting aromatic carboxylic acid 61 with thionyl chloride reacted with thiosemicarbazide, which without isolation and upon thermal heating under aqueous basic conditions, led to the desired compounds 67 (route A). Triazolethiones 69 could not be synthetized by this procedure were obtained by reaction of hydrazide 68 with carbon disulfide, followed by heating in the presence of a 25% ammonia solution (route B).
Two of the compounds synthetized showed high antitubercular activity against the dormant H37Ra strain in vitro and ex vivo; they also showed extremely low cytotoxicity and high solubility indicating the potential of developing these compounds further as novel therapeutics against tuberculosis infection (Table 12). thionyl chloride reacted with thiosemicarbazide, which without isolation and upon thermal heating under aqueous basic conditions, led to the desired compounds 67 (route A). Triazolethiones 69 could not be synthetized by this procedure were obtained by reaction of hydrazide 68 with carbon disulfide, followed by heating in the presence of a 25% ammonia solution (route B). Two of the compounds synthetized showed high antitubercular activity against the dormant H37Ra strain in vitro and ex vivo; they also showed extremely low cytotoxicity and high solubility indicating the potential of developing these compounds further as novel therapeutics against tuberculosis infection (Table 12). Liu et al. [92] reported in 2017 a family of 7-hydroxy-4-phenylchromen-2-linked 1,2,4-triazoles with potent antitumoral activities. The synthetic procedure adopted made use of the coumarin synthetized derivatives 70 that were functionalized by reaction with ethylbromoacetate followed by transformation of the ester group to a hydrazide functionality. The latter, when condensed with dimethylacetal followed by a strong thermal reaction with an amine in the presence of glacial acetic acid afforded the triazole derivatives 73 in good overall yields (Scheme 19).  A). Triazolethiones 69 could not be synthetized by this procedure were obtained by reaction of hydrazide 68 with carbon disulfide, followed by heating in the presence of a 25% ammonia solution (route B). Two of the compounds synthetized showed high antitubercular activity against the dormant H37Ra strain in vitro and ex vivo; they also showed extremely low cytotoxicity and high solubility indicating the potential of developing these compounds further as novel therapeutics against tuberculosis infection (Table 12). Liu et al. [92] reported in 2017 a family of 7-hydroxy-4-phenylchromen-2-linked 1,2,4-triazoles with potent antitumoral activities. The synthetic procedure adopted made use of the coumarin synthetized derivatives 70 that were functionalized by reaction with ethylbromoacetate followed by transformation of the ester group to a hydrazide functionality. The latter, when condensed with dimethylacetal followed by a strong thermal reaction with an amine in the presence of glacial acetic acid afforded the triazole derivatives 73 in good overall yields (Scheme 19). 0. 64 9.05 >100 >100 >100 >1280 A). Triazolethiones 69 could not be synthetized by this procedure were obtained by reaction of hydrazide 68 with carbon disulfide, followed by heating in the presence of a 25% ammonia solution (route B). Two of the compounds synthetized showed high antitubercular activity against the dormant H37Ra strain in vitro and ex vivo; they also showed extremely low cytotoxicity and high solubility indicating the potential of developing these compounds further as novel therapeutics against tuberculosis infection (Table 12). Liu et al. [92] reported in 2017 a family of 7-hydroxy-4-phenylchromen-2-linked 1,2,4-triazoles with potent antitumoral activities. The synthetic procedure adopted made use of the coumarin synthetized derivatives 70 that were functionalized by reaction with ethylbromoacetate followed by transformation of the ester group to a hydrazide functionality. The latter, when condensed with dimethylacetal followed by a strong thermal reaction with an amine in the presence of glacial acetic acid afforded the triazole derivatives 73 in good overall yields (Scheme 19). Liu et al. [92] reported in 2017 a family of 7-hydroxy-4-phenylchromen-2-linked 1,2,4triazoles with potent antitumoral activities. The synthetic procedure adopted made use of the coumarin synthetized derivatives 70 that were functionalized by reaction with ethylbromoacetate followed by transformation of the ester group to a hydrazide functionality. The latter, when condensed with dimethylacetal followed by a strong thermal reaction with an amine in the presence of glacial acetic acid afforded the triazole derivatives 73 in good overall yields (Scheme 19).

Annulated 1,2,4-Triazole Systems
Among the annulated 1,2,4-triazole systems we will present the triazolophthalazine frame that was developed in our group by conventional and non-conventional means.
Some years ago, De et al. [93] explored the possibility of cinnamic acid derivatives as potential antituberculosis agents. In the course of their studies the authors synthetized 4-alkoxy cinnamoyl derivatives resulting from the coupling of the corresponding acids (or activated ones) with different nucleophiles and among them amines, hydrazines, thiols.

Annulated 1,2,4-Triazole Systems
Among the annulated 1,2,4-triazole systems we will present the triazolophthalazine frame that was developed in our group by conventional and non-conventional means.
Some years ago, De et al. [93] explored the possibility of cinnamic acid derivatives as potential antituberculosis agents. In the course of their studies the authors synthetized 4-alkoxy cinnamoyl derivatives resulting from the coupling of the corresponding acids (or activated ones) with different nucleophiles and among them amines, hydrazines, thiols.

Annulated 1,2,4-Triazole Systems
Among the annulated 1,2,4-triazole systems we will present the triazolophthalazine frame that was developed in our group by conventional and non-conventional means.
Some years ago, De et al. [93] explored the possibility of cinnamic acid derivatives as potential antituberculosis agents. In the course of their studies the authors synthetized 4-alkoxy cinnamoyl derivatives resulting from the coupling of the corresponding acids (or activated ones) with different nucleophiles and among them amines, hydrazines, thiols.
In the course of their first studies, when reacting under peptide coupling conditions (EDC, HCl, HOBt, and trimethylamine), 1-hydrazinophthalazine hydrochloride 75, and cinnamic acid derivatives for 48 h under reflux in acetonitrile, the authors obtained in good yields the corresponding 3-(4-alkoxystyryl)- [1,2,4] All alkoxylated compounds showed good antitubercular activities. More importantly, triazolophthalazine derivative 73 (Figure 7), bearing a 4-isopentenyloxy chain on the phenyl ring, showed excellent antitubercular potency (MIC = 1.4 µM) in addition to a very good cytotoxicity toward HCT116 human cells (IC 50 = 449 µM; 160 µg/mL and selectivity index SI = 320). It is also noteworthy to point out that this compound does not act on the mycolic acid biosynthesis of mycobacteria and up to now its target is unknown. All alkoxylated compounds showed good antitubercular activities. More importantly, triazolophthalazine derivative 73 (Figure 7), bearing a 4-isopentenyloxy chain on the phenyl ring, showed excellent antitubercular potency (MIC = 1.4 μM) in addition to a very good cytotoxicity toward HCT116 human cells (IC50 = 449 μM; 160 μg/mL and selectivity index SI = 320). It is also noteworthy to point out that this compound does not act on the mycolic acid biosynthesis of mycobacteria and up to now its target is unknown. In order to build a small, focused library of styryltriazolophthalazines, Veau et al. [94] modified the convergent route to a divergent one, by exploring the possibility of the construction of the phenolic precursor 79 that could then lead to various alkoxylated derivatives of type 77 (Scheme 21). In order to build a small, focused library of styryltriazolophthalazines, Veau et al. [94] modified the convergent route to a divergent one, by exploring the possibility of the construction of the phenolic precursor 79 that could then lead to various alkoxylated derivatives of type 77 (Scheme 21). In order to build a small, focused library of styryltriazolophthalazines, Ve [94] modified the convergent route to a divergent one, by exploring the possibili construction of the phenolic precursor 79 that could then lead to various alkoxyl rivatives of type 77 (Scheme 21). In continuation of this work on the triazolophtalazine frame the authors con that this could be an interesting pharmacophore to explore. In that respect th synthetized two compounds bearing either an alkyne group or a bromine at the tion of the 1,2,4-triazole frame.
Concerning the alkyne compound, after several attempts, Veau et al. [94] con the best way to obtain it is a two-step sequence. Coupling of trimethylsilyl propi 82 with 1-hydrazinylphthalazine hydrochloride 74 under mild conditions afford clic precursor 83. Under microwave irradiation in acetonitrile for 1 h, the precur construction of the phenolic precursor 79 that could then lead to various alkoxylated derivatives of type 77 (Scheme 21). In continuation of this work on the triazolophtalazine frame the authors considered that this could be an interesting pharmacophore to explore. In that respect they also synthetized two compounds bearing either an alkyne group or a bromine at the 2 position of the 1,2,4-triazole frame.
Concerning the alkyne compound, after several attempts, Veau et al. [94] considered the best way to obtain it is a two-step sequence. Coupling of trimethylsilyl propiolic acid 82 with 1-hydrazinylphthalazine hydrochloride 74 under mild conditions afforded acyclic precursor 83. Under microwave irradiation in acetonitrile for 1 h, the precursor was In continuation of this work on the triazolophtalazine frame the authors considered that this could be an interesting pharmacophore to explore. In that respect they also synthetized two compounds bearing either an alkyne group or a bromine at the 2 position of the 1,2,4-triazole frame.
Concerning the alkyne compound, after several attempts, Veau et al. [94] considered the best way to obtain it is a two-step sequence. For the first time, Gonnet et al. [95] reported in 2019 the mechanochemical synthesis of 1,2,4-triazoles starting from hydralazine hydrochloride. By using a planetary ball-mill, and in the presence of pyrogenic S13 silica as the grinding auxiliary, total conversion to intermediate hydrazones 86 was achieved in a few minutes (Scheme 24). Iodobenzene diacetate (IBD) was used for optimal conversion of nonphenolic hydrazones to annulated 1,2,4-triazoles 87, while SeO 2 was found to be efficient for phenolic compounds (Scheme 25). For the first time, Gonnet et al. [95] reported in 2019 the mechanochemical synthesis of 1,2,4-triazoles starting from hydralazine hydrochloride. By using a planetary ball-mill, and in the presence of pyrogenic S13 silica as the grinding auxiliary, total conversion to intermediate hydrazones 86 was achieved in a few minutes (Scheme 24). Iodobenzene diacetate (IBD) was used for optimal conversion of nonphenolic hydrazones to annulated 1,2,4-triazoles 87, while SeO 2 was found to be efficient for phenolic compounds (Scheme 25). Scheme 24. One pot two step mechanochemical synthesis of annulated 1,2,4-triazoles 87.
In addition, for the first time, the one-pot two-step synthesis (Scheme 24) leading to annulated 1,2,4-triazoles was also successfully conducted. Comparison to the conventional syntheses of hydrazone 86 and triazole 8 showed the green metrics overall efficiency of the mechanochemical synthesis (T Scheme 25. One pot two step synthesis of phenolic 1,2,3-triazoles 89. In addition, for the first time, the one-pot two-step synthesis (Scheme 24) leading to annulated 1,2,4-triazoles was also successfully conducted.
Comparison to the conventional syntheses of hydrazone 86 and triazole 87 clearly showed the green metrics overall efficiency of the mechanochemical synthesis (Table 13). Synthesis of the brominated compound 91 was also explored. First a conventional method was performed by Veau et al. [94], by reacting overnight under reflux in ethanol, 1-hydrazinyl-phthalazine hydrochloride 74 with trimethylortho-formate in the presence of some drops of acetic acid in order to obtain unsubstituted triazolophthalazine 90. Then, reaction with bromine in the presence of pure acetic acid under reflux afforded the brominated compound 91 in 53% yield.
More recently, Gonnet et al. [95] reported the two-step bromination reaction successfully conducted by mechanochemistry. Reaction of 1-hydrazinylphthalazine hydrochloride 74 in the presence of trimethylorthoformate and some drops of acetic acid reacted in a planetary ball mill for 1 h affording quantitatively triazolo-phthalazine 90. Reaction in the same planetary ball-mill (PBM) of the triazolophthalazine with sodium bromide, oxone and some silica afforded after 1 h the brominated compound 91 in quantitative yield (Scheme 26). Scheme 25. One pot two step synthesis of phenolic 1,2,3-triazoles 89.
Comparison to the conventional syntheses of hydrazone 86 and triazole 87 clearly showed the green metrics overall efficiency of the mechanochemical synthesis (Table 13). Synthesis of the brominated compound 91 was also explored. First a conventional method was performed by Veau et al. [94], by reacting overnight under reflux in ethanol, 1-hydrazinyl-phthalazine hydrochloride 74 with trimethylortho-formate in the presence of some drops of acetic acid in order to obtain unsubstituted triazolophthalazine 90. Then, reaction with bromine in the presence of pure acetic acid under reflux afforded the brominated compound 91 in 53% yield.
More recently, Gonnet et al. [95] reported the two-step bromination reaction successfully conducted by mechanochemistry. Reaction of 1-hydrazinylphthalazine hydrochloride 74 in the presence of trimethylorthoformate and some drops of acetic acid reacted in a planetary ball mill for 1 h affording quantitatively triazolo-phthalazine 90. Reaction in the same planetary ball-mill (PBM) of the triazolophthalazine with sodium bromide, oxone and some silica afforded after 1 h the brominated compound 91 in quantitative yield (Scheme 26). All compounds bearing the 1,2,4-triazole frame were evaluated for various biological properties. The 3-aryl substituted 1,2,4-triazole derivatives 87 and 89 do not present valuable activities against M.tuberculosis ((MIC around 80 µM) [96]. The alkyne derivative 85 present a very good activity (MIC 12.9 µM) while the brominated 91 is much less potent (MIC 40 µM) [94]. The alkyne derivative 85 did not manifest cytotoxicity toward HCT116 human cells while it is equally active against multidrug-resistant M. tuberculosis strains. Considering all results starting from compound 73, it seems likely that the triazolophthalazine could be an important scaffold in order to obtain new families of compounds with strong antitubercular activity and an alternative mode of action for compared with standard anti M. tuberculosis drugs.
In that respect, the authors consider the possibility of developing focused libraries of triazolophthalazine compounds by using the two important precursors that are the alkyne and the brominated derivatives and developing coupling reactions under conventional and/or mechanochemical means. In addition, further work is necessary to tackle the identification of the protein targeted by this class of potent anti M. tuberculosis compounds.

Mechanochemical Cycloreversion of 1,2,3-Triazoles
Globally, the cycloaddition process is strongly favored thermodynamically (∆H = −45 to −55 Kcal/mol) [97]. The 1,2,3-triazole frame is robust and inert under most thermal chemical treatments but also in aqueous or biological environments. In 2011, Brantley et al. [98] reported the possibility of unclicking the click on specific 1,4-substituted 1,2,3triazoles by mechanical forces. They first hypothesized that mechanical exogenous forces directed to judiciously chosen scaffolds incorporated in a polymer chain can formally disallow pericyclic reactions. The authors incorporated the triazole ring in polymer chains and one of them was judiciously chosen, when mechanical ultrasound forces were applied (ultrasonication in a Suslick cell at 0 • C) resulted in the cleavage of the triazole ring 92 to its alkyne 93 and azide 94 components (Scheme 27).
kyne and the brominated derivatives and developing coupling reactions under tional and/or mechanochemical means. In addition, further work is necessary t the identification of the protein targeted by this class of potent anti M. tuberculo pounds.

Mechanochemical Cycloreversion of 1,2,3-Triazoles
Globally, the cycloaddition process is strongly favored thermodynamicall −45 to −55 Kcal/mol) [97]. The 1,2,3-triazole frame is robust and inert under most chemical treatments but also in aqueous or biological environments. In 2011, Bra al. [98] reported the possibility of unclicking the click on specific 1,4-sub 1,2,3-triazoles by mechanical forces. They first hypothesized that mechanical exo forces directed to judiciously chosen scaffolds incorporated in a polymer chain mally disallow pericyclic reactions. The authors incorporated the triazole ring in p chains and one of them was judiciously chosen, when mechanical ultrasound forc applied (ultrasonication in a Suslick cell at 0 °C) resulted in the cleavage of the ring 92 to its alkyne 93 and azide 94 components (Scheme 27). They concluded that the ability to selectively deconstruct triazoles might elaborate mechano-responsive materials for potential controlled bioconjugation tions or force responsive fluorescent tags for biological assays.
This stimulated a puzzling publication (that was retracted since by the edi aroused strong debate. The same authors, based on sonochemical experiments re extended Bel theory, discussed and concluded on the lowering of the activation barrier for cycloreversion [100] through application of an external force to the ring. In the contrary, purely theoretical work, it was shown that the cyclorevers rier is as high as 70 Kcal/mol [101]. In addition, the mechanochemically indu ro-click of the 1,2,3-triazole ring vs. bond rupture next to it could not be unambi They concluded that the ability to selectively deconstruct triazoles might serve to elaborate mechano-responsive materials for potential controlled bioconjugation applications or force responsive fluorescent tags for biological assays. This stimulated a puzzling publication (that was retracted since by the editor) [99] aroused strong debate. The same authors, based on sonochemical experiments related to extended Bel theory, discussed and concluded on the lowering of the activation energy barrier for cycloreversion [100] through application of an external force to the triazole ring. In the contrary, purely theoretical work, it was shown that the cycloreversion barrier is as high as 70 Kcal/mol [101]. In addition, the mechanochemically induced retro-click of the 1,2,3-triazole ring vs. bond rupture next to it could not be unambiguously concluded when single molecule force spectroscopy experiments were applied [100]. Stauch and Dreuw reported in 2017 [102] a theoretical work where by using the JEDI (Judgment of Energy DIstribution) analysis it was concluded that for 1,4 disubstituted triazoles the unclick reaction is impossible, even when Cu I assisted (Scheme 28a). For 1,5-disubstituted triazoles where a parallel alignment of the scissile bond exists, this could be feasible. Nevertheless, the retro click cycloreversion is not selective as it competes with the carbon-nitrogen bond connecting the triazole ring to the linker. During the same year, Krupička et al. [103] also concluded that only in these 1,5-disubstituted 1,2,3-triazole systems are the Gibbs free energy barriers 55 Kcal/mol (unclick reaction) versus 45 Kcal/mol for external C-N bond cleavage. The authors also point out an extremely exciting finding by showing that the calculated Ru-assisted mechanochemical cycloreversion of the 1,5 regioisomer dramatically lowers the activation energy of the rate determining step down to 20 Kcal/mol (the first step), while the decomplexation of the cleaved intermediate readily occurs, leading to the alkyne and azide components (Scheme 28b). 1,2,3-triazole systems are the Gibbs free energy barriers 55 Kcal/mol (unclick reaction) versus 45 Kcal/mol for external C-N bond cleavage. The authors also point out an extremely exciting finding by showing that the calculated Ru-assisted mechanochemical cycloreversion of the 1,5 regioisomer dramatically lowers the activation energy of the rate determining step down to 20 Kcal/mol (the first step), while the decomplexation of the cleaved intermediate readily occurs, leading to the alkyne and azide components (Scheme 28b).
In conclusion, the authors point out that the Ru-assisted mechanochemical unclicking of the 1,5 regioisomer could be an extremely selective process. If this is to be experimentally proved it would open the path for very important potential applications.

Conclusions
Among the nitrogen-contained heterocyclic ring structures one of the most important providing long term advancement in the medical field are triazoles. They became in the last decades the heterocycle of choice in all fields of drug discovery receiving much of the attention and offering new opportunities for medicinal chemists.
We must point out that while 1,2,3-triazole systems are very well documented in terms of classical organic synthesis, their synthetic methodologies under green chemistry approaches based on less energy input requirements are beginning to emerge, but are still focused on ultrasound reactions. It is our feeling that the mechanical approaches will be further developed (mechanochemical synthesis, ultrasound.) There is still a lot to be invented and this is a great opportunity for the chemists and medicinal chemists, but also in extenso for the pharmaceutical industry.
The same and in a greater extent is also true for the synthesis of the valuable regioisomeric scaffold of 1,2,4-triazole systems. Except for our contribution in the field, there is no other green chemistry (ultrasound or mechanochemistry) developed for this family of compounds. We believe that here also great opportunities exist for all communities of synthetic, physical, theoretical and medicinal chemists, whether they are in the academia or in the industry. Scheme 28. Reactions of (a) 1,4-dimethyl 1,2,3-triazole leading to mononuclear Cu I -catalyzed cycloreversion and (b) 1,5-dimethyl 1,2,3-triazole leading to Ru II -catalyzed cycloreversions.
In conclusion, the authors point out that the Ru-assisted mechanochemical unclicking of the 1,5 regioisomer could be an extremely selective process. If this is to be experimentally proved it would open the path for very important potential applications.

Conclusions
Among the nitrogen-contained heterocyclic ring structures one of the most important providing long term advancement in the medical field are triazoles. They became in the last decades the heterocycle of choice in all fields of drug discovery receiving much of the attention and offering new opportunities for medicinal chemists.
We must point out that while 1,2,3-triazole systems are very well documented in terms of classical organic synthesis, their synthetic methodologies under green chemistry approaches based on less energy input requirements are beginning to emerge, but are still focused on ultrasound reactions. It is our feeling that the mechanical approaches will be further developed (mechanochemical synthesis, ultrasound). There is still a lot to be invented and this is a great opportunity for the chemists and medicinal chemists, but also in extenso for the pharmaceutical industry.
The same and in a greater extent is also true for the synthesis of the valuable regioisomeric scaffold of 1,2,4-triazole systems. Except for our contribution in the field, there is no other green chemistry (ultrasound or mechanochemistry) developed for this family of compounds. We believe that here also great opportunities exist for all communities of synthetic, physical, theoretical and medicinal chemists, whether they are in the academia or in the industry.
Finally, concerning the mechanochemical (ultrasound) unclicking of the 1,5 disubstituted 1,2,3-triazole, active experimental research work is needed in order to create an extremely selective process that could also confirm the theoretical work. That could pave the way for important biological and other applications.

Conflicts of Interest:
The authors declare no conflict of interest.
Sample Availability: Samples of the compounds are not available from the authors.