Halogen-Induced Controllable Cyclizations as Diverse Heterocycle Synthetic Strategy

In organic synthesis, due to their high electrophilicity and leaving group properties, halogens play pivotal roles in the activation and structural derivations of organic compounds. Recently, cyclizations induced by halogen groups that allow the production of diverse targets and the structural reorganization of organic molecules have attracted significant attention from synthetic chemists. Electrophilic halogen atoms activate unsaturated and saturated hydrocarbon moieties by generating halonium intermediates, followed by the attack of carbon-containing, nitrogen-containing, oxygen-containing, and sulfur-containing nucleophiles to give highly functionalized carbocycles and heterocycles. New transformations of halogenated organic molecules that can control the formation and stereoselectivity of the products, according to the difference in the size and number of halogen atoms, have recently been discovered. These unique cyclizations may possibly be used as efficient synthetic strategies with future advances. In this review, innovative reactions controlled by halogen groups are discussed as a new concept in the field of organic synthesis.


Introduction
Halogen sources, such as chlorine, bromine, and iodine, are present in high abundance on the earth and are indispensable in organic synthesis since they enhance the reactivity of organic compounds. The use of halogen-containing reagents and oxidants in modern chemistry means that the environmental impact of a reaction is lowered when compared with the use of heavy metals, thus, expanding the field of activity for the synthesis of cyclic compounds. The intramolecular cyclization that accompanies the introduction of halogens is attractive from the viewpoint of green and process chemistry perspectives. In the formation of lactones and lactams, halogen-induced intramolecular cyclizations are usually carried out under mild conditions, while condensation strategies for intramolecular cyclization mostly require the use of water-sensitive reagents such as Lewis acids and condensation reagents, under heating conditions. In addition, the use of halogen-induced cyclizations avoids the occurrence of undesirable intermolecular bimolecular side-reactions. The halogen-containing molecules that result from intramolecular halocyclizations are also advantageous as they can be further functionalized.
Halogen-induced intramolecular cyclizations have a long history of being used for the transformation of a linear to a cyclic molecule. In the late 19th century, the first halogen-induced intramolecular cyclization was reported in the form of the bromolactonization of olefinic acids [1,2]. In the middle An early example of a reagent-switchable reaction is the cyclization involved in iodolactonization reactions. In 1953, Tamelen and Shamma reported the iodolactonization of olefinic acid 1 to obtain γ-lactone 2 ( Figure 2) [3]. In 1972, Barnett and Sohn then reported the selective iodolactonization of the same olefinic acid 1 to alternatively synthesize β-lactone 2 [21]. From these studies, the endo/exo selectivity of iodolactonizations was found to be strongly influenced by the reaction conditions and combination of the reagents. Halogen-induced intramolecular cyclizations have a long history of being used for the transformation of a linear to a cyclic molecule. In the late 19th century, the first halogen-induced intramolecular cyclization was reported in the form of the bromolactonization of olefinic acids [1,2]. In the middle of the 20th century, endo/exo-cyclized isomers were identified [3]. In the latter half of the 20th century, the halolactonizations of olefinic acids and amides, and the haloetherifications of olefinic alcohols were reported [4][5][6][7]. However, in the 21st century, there have been significant developments in halogen chemistry, as halogens have been determined to contribute to the control of high selectivities for the cyclization reactions [8][9][10][11][12][13][14][15][16][17][18][19][20]. In modern halogen chemistry, halogencontrolled reaction strategies that can contribute toward selective transformations have, thus, become an important issue and are of utmost interest in organic synthesis.
Halolactonizations of olefinic carboxylic acids are known as being typically controllable intramolecular cyclization reactions that enable diverse heterocycle formations. In this review, these reactions are categorized into a) reagent-switchable reactions and b) substrate-switchable reactions ( Figure 1). Reagent-switchable cyclization reactions allow the selective synthesis of two or more products from one substrate via reagent control (Figure 1a), whereas substrate-switchable reactions can be defined as a synthetic sequence in which the final products can be altered, according to the pre-modifications and/or isomerisms of the substrates, e.g., protection of amines and the cis-trans isomerization of olefins (Figure 1b). These controllable intramolecular cyclizations are excellent for the selective synthesis of isomers and their derivatives. An early example of a reagent-switchable reaction is the cyclization involved in iodolactonization reactions. In 1953, Tamelen and Shamma reported the iodolactonization of olefinic acid 1 to obtain γ-lactone 2 ( Figure 2) [3]. In 1972, Barnett and Sohn then reported the selective iodolactonization of the same olefinic acid 1 to alternatively synthesize β-lactone 2′ [21]. From these studies, the endo/exo selectivity of iodolactonizations was found to be strongly influenced by the reaction conditions and combination of the reagents.  However, an early example of a substrate-switchable cyclization was observed in chloro-lactonization and bromo-lactonization reactions. In 1937, the first example of selective β-lactone formation leading to anti-4 and syn-4 from Z-3 and E-dicarboxylates 3 , respectively by means of a halolactonization reaction Molecules 2020, 25, 6007 3 of 33 was reported by Tarbell and Bartlett [22]. In 2001, the William's group re-investigated this study to support the regiospecific halo-lactonizations of Z-3 and E-dicarboxylate 3 to anti-4 and syn-lactone 4 , respectively [23] (Figure 3). It should be noted that the syn/anti selectivity in halo-lactonizations clearly depends on the isomerisms of substrates that can be prepared from common synthetic precursors.
Molecules 2020, 25, x FOR PEER REVIEW 3 of 34 However, an early example of a substrate-switchable cyclization was observed in chlorolactonization and bromo-lactonization reactions. In 1937, the first example of selective β-lactone formation leading to anti-4 and syn-4′ from Z-3 and E-dicarboxylates 3′, respectively by means of a halolactonization reaction was reported by Tarbell and Bartlett [22]. In 2001, the William's group reinvestigated this study to support the regiospecific halo-lactonizations of Z-3 and E-dicarboxylate 3′ to anti-4 and syn-lactone 4′, respectively [23] (Figure 3). It should be noted that the syn/anti selectivity in halo-lactonizations clearly depends on the isomerisms of substrates that can be prepared from common synthetic precursors. Halogen-addition type intramolecular cyclizations of unsaturated substrates, such as the halolactonization of olefinic acids, are representative examples of controllable syntheses, while those for saturated substrates, such as the halo-lactonization of cyclopropyl carboxylic acids 5 and 5′ using a Lewis base sulfide catalyst and 1,3-dibromo-5,5-dimethylhydantoin (DBH), are in the minority, but are still noteworthy (Figure 4) [24]. The Yeung group revealed that the bromo-lactonization of trans-1,2-disubstituted cyclopropyl carboxylic acid 5 and 1,1-disubstituted isomer 5′ selectively yields endocyclized 6 and exo-isomer 6′, respectively, according to the substitution patterns of substrates 5 and 5′. In this reaction, the cyclopropane moiety acts as an electron acceptor for the electrophilic brominations. Meanwhile, halogen-elimination type intramolecular cyclizations are rather rare, especially in the form of controllable strategies. We recently discovered the unique halogen-controlled dehalolactonization reaction of haloketo acids 7 and 7′ during our investigation on the monochlorodimedone assay targeting haloperoxidase [25]. Dehalolactonization reactions of these haloketo acids proceed via a unique cyclopropanone intermediate ( Figure 5), which then allows the endo-cyclization or exo-cyclization products to be produced selectively. Although endo-cyclization of monohaloketo acids 7 gave oxolactones 8, exo-cyclization of di-haloketo and tri-haloketo acids 7′ Halogen-addition type intramolecular cyclizations of unsaturated substrates, such as the halo-lactonization of olefinic acids, are representative examples of controllable syntheses, while those for saturated substrates, such as the halo-lactonization of cyclopropyl carboxylic acids 5 and 5 using a Lewis base sulfide catalyst and 1,3-dibromo-5,5-dimethylhydantoin (DBH), are in the minority, but are still noteworthy ( Figure 4) [24]. The Yeung group revealed that the bromo-lactonization of trans-1,2-disubstituted cyclopropyl carboxylic acid 5 and 1,1-disubstituted isomer 5 selectively yields endo-cyclized 6 and exo-isomer 6 , respectively, according to the substitution patterns of substrates 5 and 5 . In this reaction, the cyclopropane moiety acts as an electron acceptor for the electrophilic brominations.
Molecules 2020, 25, x FOR PEER REVIEW 3 of 34 However, an early example of a substrate-switchable cyclization was observed in chlorolactonization and bromo-lactonization reactions. In 1937, the first example of selective β-lactone formation leading to anti-4 and syn-4′ from Z-3 and E-dicarboxylates 3′, respectively by means of a halolactonization reaction was reported by Tarbell and Bartlett [22]. In 2001, the William's group reinvestigated this study to support the regiospecific halo-lactonizations of Z-3 and E-dicarboxylate 3′ to anti-4 and syn-lactone 4′, respectively [23] (Figure 3). It should be noted that the syn/anti selectivity in halo-lactonizations clearly depends on the isomerisms of substrates that can be prepared from common synthetic precursors. Halogen-addition type intramolecular cyclizations of unsaturated substrates, such as the halolactonization of olefinic acids, are representative examples of controllable syntheses, while those for saturated substrates, such as the halo-lactonization of cyclopropyl carboxylic acids 5 and 5′ using a Lewis base sulfide catalyst and 1,3-dibromo-5,5-dimethylhydantoin (DBH), are in the minority, but are still noteworthy ( Figure 4) [24]. The Yeung group revealed that the bromo-lactonization of trans-1,2-disubstituted cyclopropyl carboxylic acid 5 and 1,1-disubstituted isomer 5′ selectively yields endocyclized 6 and exo-isomer 6′, respectively, according to the substitution patterns of substrates 5 and 5′. In this reaction, the cyclopropane moiety acts as an electron acceptor for the electrophilic brominations. Meanwhile, halogen-elimination type intramolecular cyclizations are rather rare, especially in the form of controllable strategies. We recently discovered the unique halogen-controlled dehalolactonization reaction of haloketo acids 7 and 7′ during our investigation on the monochlorodimedone assay targeting haloperoxidase [25]. Dehalolactonization reactions of these haloketo acids proceed via a unique cyclopropanone intermediate ( Figure 5), which then allows the endo-cyclization or exo-cyclization products to be produced selectively. Although endo-cyclization of monohaloketo acids 7 gave oxolactones 8, exo-cyclization of di-haloketo and tri-haloketo acids 7′ Meanwhile, halogen-elimination type intramolecular cyclizations are rather rare, especially in the form of controllable strategies. We recently discovered the unique halogen-controlled dehalolactonization reaction of haloketo acids 7 and 7 during our investigation on the monochlorodimedone assay targeting haloperoxidase [25]. Dehalolactonization reactions of these haloketo acids proceed via a unique cyclopropanone intermediate ( Figure 5), which then allows the endo-cyclization or exo-cyclization products to be produced selectively. Although endo-cyclization of monohaloketo acids 7 gave oxolactones 8, exo-cyclization of di-haloketo and tri-haloketo acids 7 instead produced haloacyl lactones 8 . Using this transformation, the ring structure of the final products differed according to the number of pre-installed halogen groups.

Reagent-Switchable Cyclizations
Intramolecular cyclization is one of the important keys in constructing the core skeleton of organic molecules. Switchable intramolecular cyclizations allow the selective synthesis of two or more products from one substrate via control of the reagents. In the initial stage of the reaction, a halogenating agent functions as a reaction initiator to generate a reactive intermediate that has selectivity potential. Although catalysts may sometimes play pivotal roles in terms of high selectivity, it is worth mentioning that reaction conditions, such as solvent and base, also strongly influence product selectivity.

Endo/Exo Selective Cyclizations
In an iodolactonization reaction of olefinic acid 1 as a classical switchable reaction, γ-lactone 2, and β-lactone 2′ can be selectively synthesized ( Figure 2). Exo-cyclization that gives β-lactone 2′ proceeds via kinetic control on a short time scale, while endo-cyclization that produces γ-lactone 2 proceeds via thermodynamic control on a long-time scale. This is due to the slow interconversion of β-lactone 2′ to γ-lactone 2. However, styryl acetate only promotes endo-cyclization despite it taking place on a short time scale. This can be interpreted as being the result of the stabilization of a carbocation intermediate due to the effect of the γ-phenyl substituent. The study showed that the time-controlled strategy in endo/exo selectivity is strongly constrained by the reactivity of the substrates.
Göttlich and co-workers achieved the selective synthesis of 3-chloro-piperidines 10 and 2chloromethyl-pyrrolidines 10′ from the chloroaminocyclization of olefinic N-chloroamines 9 ( Figure  6) [41,42]. Endo-cyclization with n Bu4NI gave the piperidines 10, whereas exo-cyclization with BF3·OEt2 instead gave the pyrrolidines 10′. In terms of endo-cyclization, the authors proposed a reaction mechanism that proceeds via an aziridinium ion intermediate followed by an iodo-aminocyclization reaction. The intermediate and product 10 are present in equilibrium, and both substrate 9 and product 10 serve as bases. It has already been reported that pyrrolidine 10′, which is an exo-

Reagent-Switchable Cyclizations
Intramolecular cyclization is one of the important keys in constructing the core skeleton of organic molecules. Switchable intramolecular cyclizations allow the selective synthesis of two or more products from one substrate via control of the reagents. In the initial stage of the reaction, a halogenating agent functions as a reaction initiator to generate a reactive intermediate that has selectivity potential. Although catalysts may sometimes play pivotal roles in terms of high selectivity, it is worth mentioning that reaction conditions, such as solvent and base, also strongly influence product selectivity.

Endo/Exo Selective Cyclizations
In an iodolactonization reaction of olefinic acid 1 as a classical switchable reaction, γ-lactone 2, and β-lactone 2 can be selectively synthesized ( Figure 2). Exo-cyclization that gives β-lactone 2 proceeds via kinetic control on a short time scale, while endo-cyclization that produces γ-lactone 2 proceeds via thermodynamic control on a long-time scale. This is due to the slow interconversion of β-lactone 2 to γ-lactone 2. However, styryl acetate only promotes endo-cyclization despite it taking place on a short time scale. This can be interpreted as being the result of the stabilization of a carbocation intermediate due to the effect of the γ-phenyl substituent. The study showed that the time-controlled strategy in endo/exo selectivity is strongly constrained by the reactivity of the substrates.
Göttlich and co-workers achieved the selective synthesis of 3-chloro-piperidines 10 and 2-chloromethyl-pyrrolidines 10 from the chloroaminocyclization of olefinic N-chloroamines 9 ( Figure 6) [41,42]. Endo-cyclization with n Bu 4 NI gave the piperidines 10, whereas exo-cyclization with BF 3 ·OEt 2 instead gave the pyrrolidines 10 . In terms of endo-cyclization, the authors proposed a reaction mechanism that proceeds via an aziridinium ion intermediate followed by an iodo-amino-cyclization reaction. The intermediate and product 10 are present in equilibrium, and both substrate 9 and product 10 serve as bases. It has already been reported that pyrrolidine 10 , which is an exo-cyclized product, is converted to piperidine 10 via a rearrangement under basic conditions [43,44]. Unfortunately, the generation of an N-iodoamine intermediate cannot be detected because the reactivity of N-iodoamine is too high.
Flynn and co-workers achieved the selective synthesis of indoles 12 and quinolines 12 from N,N-dimethylanilines 11 that feature a propargyl alcohol moiety (Figure 7a). The exo-cyclization reaction to produce indoles 12 proceeds in a protic solvent such as EtOH or MeOH, while endo-cyclization occurs in an aprotic solvent such as MeCN or CH 2 Cl 2 to alternatively give quinolines 12 [45]. Although the key factor in the selectivity is the solvent, its control mechanism has not been clarified. Further, the authors extended this method to the synthesis of tricyclic compounds [46,47]. This synthesis is accomplished using two types of iodine electrophiles to trigger a domino cascade reaction of alkynylphenylimines 13 bearing nucleophilic hydroxy groups. However, aprotic solvents are used in the formation of the skeleton of both indoles 14 and quinolines 14 , and the control factors are, thus, different from those described for the previous method including the use of the iodination agents, I 2 and N-iodosuccinimide (NIS). The authors proposed that I 2 can interact with the imine site, whereas NIS activates the alkyne site ( Figure 7b). It was explained that the cationic carbon atom of the imine initiates quinoline formation via electrophilic cyclization involving the alkyne, while the activated alkyne site forms an indole skeleton via a nucleophilic cyclization with the imine nitrogen atom.
Molecules 2020, 25, x FOR PEER REVIEW 5 of 34 cyclized product, is converted to piperidine 10 via a rearrangement under basic conditions [43,44]. Unfortunately, the generation of an N-iodoamine intermediate cannot be detected because the reactivity of N-iodoamine is too high. Flynn and co-workers achieved the selective synthesis of indoles 12 and quinolines 12′ from N,Ndimethylanilines 11 that feature a propargyl alcohol moiety (Figure 7a). The exo-cyclization reaction to produce indoles 12 proceeds in a protic solvent such as EtOH or MeOH, while endo-cyclization occurs in an aprotic solvent such as MeCN or CH2Cl2 to alternatively give quinolines 12′ [45].
Although the key factor in the selectivity is the solvent, its control mechanism has not been clarified.
Further, the authors extended this method to the synthesis of tricyclic compounds [46,47]. This synthesis is accomplished using two types of iodine electrophiles to trigger a domino cascade reaction of alkynylphenylimines 13 bearing nucleophilic hydroxy groups. However, aprotic solvents are used in the formation of the skeleton of both indoles 14 and quinolines 14′, and the control factors are, thus, different from those described for the previous method including the use of the iodination agents, I2 and N-iodosuccinimide (NIS). The authors proposed that I2 can interact with the imine site, whereas NIS activates the alkyne site ( Figure 7b). It was explained that the cationic carbon atom of the imine initiates quinoline formation via electrophilic cyclization involving the alkyne, while the activated alkyne site forms an indole skeleton via a nucleophilic cyclization with the imine nitrogen atom. The Wirth group reported an effective organocatalytic approach for the selective endo/exocyclization of olefinic N-tosylamines 15 [48]. In the presence of chiral cyclic thiourea as an organocatalyst, a catalytic amount of KBr was added to give 3-iodopiperidine 16, the endo-cyclization product of olefinic N-tosylamine ( Figure 8). However, the addition of a catalytic amount of KI afforded 2-iodomethyl-pyrrolidine 16′ stereo-selectively as the exo-cyclized product. From this study, it was, therefore, confirmed that these additives affect the halogen bonding interactions of the thiourea catalyst toward substrates and electrophilic iodine species. However, the precise control The Wirth group reported an effective organocatalytic approach for the selective endo/exo-cyclization of olefinic N-tosylamines 15 [48]. In the presence of chiral cyclic thiourea as an organocatalyst, a catalytic amount of KBr was added to give 3-iodopiperidine 16, the endo-cyclization product of olefinic N-tosylamine ( Figure 8). However, the addition of a catalytic amount of KI afforded 2-iodomethyl-pyrrolidine 16 stereo-selectively as the exo-cyclized product. From this study, it was, therefore, confirmed that these additives affect the halogen bonding interactions of the thiourea catalyst toward substrates and electrophilic iodine species. However, the precise control mechanism of the endo/exo selectivity still remains somewhat unclear.

O/N Atom-Selective Cyclizations
One of the most attractive extensions of switchable halocyclizations is the incorporation of heteroatoms into the ring structure. Hence, C-N bond formation that occurs during the cyclization of olefinic carbamates give rise to urethane derivatives, while C-O bond formation produces carbonate derivatives. Hirama and co-workers found that N-cyclization and O-cyclization modes in the iodo-cyclizations of olefinic N-tosyl carboxamides 17 can be successfully controlled by adjusting the reaction time ( Figure 9) [49]. In a two-phase system consisting of Et 2 O and aqueous NaHCO 3 , the treatment of olefinic N-tosyl carbamate 17 with I 2 for 20 min generated only cyclic urea 18 , while cyclic carbonate 18 was exclusively obtained after a prolonged reaction time of 3 h.  Typical iodo-cyclizations with amphoteric nucleophiles, such as carbamates, amides, or ureas, preferentially gave the corresponding O-cyclization products over the N-cyclized counterparts. The reason for this product control can be explained using the hard and soft (Lewis) acids and bases (HSAB) principle ( Figure 10). The electronegative O atom, rather than the N atom, shows a preference for attacking iodine-olefin π complexes, which are characterized as hard electrophiles. However, in order to promote the N-cyclization reaction, it is necessary to lower the pKa value at the NH position via N-substitution. The Taguchi group succeeded in the O/N atom-selective cyclization of olefinic urea 19 using a carbamate protection group [50]. Although the selective O-cyclization reaction to obtain N-2-oxazolidinylidene 20 proceeds under moderate conditions, selective N-cyclization to afford 2-imidazolidinone 20′ was achieved using a metal base, such as n BuLi or LiAl(O t Bu)4 ( Figure  11). Similar bases are used for the selective N-cyclization of olefinic carbamates and amides [51]. It is considered that the N-cyclization preferentially proceeds because the nucleophilicity of the O atom is decreased due to the formation of a six-membered chelate ring structure.  Typical iodo-cyclizations with amphoteric nucleophiles, such as carbamates, amides, or ureas, preferentially gave the corresponding O-cyclization products over the N-cyclized counterparts. The reason for this product control can be explained using the hard and soft (Lewis) acids and bases (HSAB) principle ( Figure 10). The electronegative O atom, rather than the N atom, shows a preference for attacking iodine-olefin π complexes, which are characterized as hard electrophiles. However, in order to promote the N-cyclization reaction, it is necessary to lower the pKa value at the NH position via N-substitution. The Taguchi group succeeded in the O/N atom-selective cyclization of olefinic urea 19 using a carbamate protection group [50]. Although the selective O-cyclization reaction to obtain N-2-oxazolidinylidene 20 proceeds under moderate conditions, selective N-cyclization to afford 2-imidazolidinone 20 was achieved using a metal base, such as n BuLi or LiAl(O t Bu) 4 ( Figure 11). Similar bases are used for the selective N-cyclization of olefinic carbamates and amides [51]. It is considered that the N-cyclization preferentially proceeds because the nucleophilicity of the O atom is decreased due to the formation of a six-membered chelate ring structure. urea 19 using a carbamate protection group [50]. Although the selective O-cyclization reaction to obtain N-2-oxazolidinylidene 20 proceeds under moderate conditions, selective N-cyclization to afford 2-imidazolidinone 20′ was achieved using a metal base, such as n BuLi or LiAl(O t Bu)4 ( Figure  11). Similar bases are used for the selective N-cyclization of olefinic carbamates and amides [51]. It is considered that the N-cyclization preferentially proceeds because the nucleophilicity of the O atom is decreased due to the formation of a six-membered chelate ring structure.  Zhou and co-workers developed an O/N regioselective bromocyclization method to produce olefinic N-tosyl carbamates 21 [52]. The outcome of this reaction is heavily dependent on the electrophilic source used. NsNBr2 selectively produces the O-cyclization products 22 in CH2Cl2 ( Figure 12). However, selective N-cyclization products 22′ can be obtained by treating TsNBr2 with t BuOK in tetrahydrofuran (THF), but the control mechanism of this reaction remains unclear. Zhou and co-workers developed an O/N regioselective bromocyclization method to produce olefinic N-tosyl carbamates 21 [52]. The outcome of this reaction is heavily dependent on the electrophilic source used. NsNBr 2 selectively produces the O-cyclization products 22 in CH 2 Cl 2 ( Figure 12). However, selective N-cyclization products 22 can be obtained by treating TsNBr 2 with t BuOK in tetrahydrofuran (THF), but the control mechanism of this reaction remains unclear. The Cariou group achieved the O/N atom-selective bromocyclizations of olefinic ureas 23 using hypervalent iodine reagents [53]. O-cyclization with PhI(OCOCF3)2 and the bromine source Py·HBr gave oxazolidinone oximes 24, while N-cyclization with PhI(OPiv)2 and t Bu4NBr produced Nhydroxylated 2-imidazolidinone 24′ ( Figure 13). In the O-cyclization, an ionic mechanism in which PhI(Br)OCOCF3 as a bromonium cation is generated by the ligand exchange of PhI(OCOCF3)2 has been proposed. In the N-cyclization, a radical mechanism that proceeds via the formation of an N-I bond intermediate from PhI(OPiv)2 and an oxime moiety is believed to occur. A synthetic method for synthesizing cyclic ureas and cyclic iso-ureas has also been reported to proceed via an O/N atomselective cyclization using a combination of PhI(OAc)2 and a metal catalyst [54]. The Cariou group achieved the O/N atom-selective bromocyclizations of olefinic ureas 23 using hypervalent iodine reagents [53]. O-cyclization with PhI(OCOCF 3 ) 2 and the bromine source Py·HBr gave oxazolidinone oximes 24, while N-cyclization with PhI(OPiv) 2 and t Bu 4 NBr produced N-hydroxylated 2-imidazolidinone 24 ( Figure 13). In the O-cyclization, an ionic mechanism in which PhI(Br)OCOCF 3 as a bromonium cation is generated by the ligand exchange of PhI(OCOCF 3 ) 2 has been proposed. In the N-cyclization, a radical mechanism that proceeds via the formation of an N-I bond intermediate from PhI(OPiv) 2 and an oxime moiety is believed to occur. A synthetic method for synthesizing cyclic ureas and cyclic iso-ureas has also been reported to proceed via an O/N atom-selective cyclization using a combination of PhI(OAc) 2 and a metal catalyst [54].
In addition, in terms of O-cyclization, Cochran and Michael used a hypervalent iodine reagent, iodosobenzene (PhIO), in an intramolecular oxo-amination reaction to achieve the selective synthesis of bicyclic iso-ureas 26 from olefinic N-tosylureas 25 [55]. The authors proposed a reaction mechanism in which the iodine(III) reagent, PhIOTMS(OTf), derived from the reaction of PhIO with trimethylsilyl triflate (TMSOTf) contributes to the generation of an iodonium(III) ion ( Figure 14). In this reaction mechanism, it can be determined that the selective O-cyclization reaction proceeds via a second intermediate generated by the 5-exo-cyclization of the nitrogen at the urea moiety of the iodonium intermediate. Due to the high nucleophilicity of the oxygen atom, O-cyclization preferentially takes place under strongly acidic conditions. O-cyclization is favored even more under weakly acidic conditions, such as in acetic acid, but the product yield is very low. On the other hand, Muñiz and co-workers selectively synthesized N-cyclized bicyclic ureas 26 via an intramolecular diamination reaction using IPy 2 BF 4 [56]. Their method, in which a highly reactive iodonium intermediate is proposed, achieves excellent yield and high selectivity, despite high temperature conditions being used. A method for synthesizing a similar bicyclic compound via temperature-dependent O/N atom-selective cyclization has also been reported [57]. The Cariou group achieved the O/N atom-selective bromocyclizations of olefinic ureas 23 using hypervalent iodine reagents [53]. O-cyclization with PhI(OCOCF3)2 and the bromine source Py·HBr gave oxazolidinone oximes 24, while N-cyclization with PhI(OPiv)2 and t Bu4NBr produced Nhydroxylated 2-imidazolidinone 24′ ( Figure 13). In the O-cyclization, an ionic mechanism in which PhI(Br)OCOCF3 as a bromonium cation is generated by the ligand exchange of PhI(OCOCF3)2 has been proposed. In the N-cyclization, a radical mechanism that proceeds via the formation of an N-I bond intermediate from PhI(OPiv)2 and an oxime moiety is believed to occur. A synthetic method for synthesizing cyclic ureas and cyclic iso-ureas has also been reported to proceed via an O/N atomselective cyclization using a combination of PhI(OAc)2 and a metal catalyst [54]. In addition, in terms of O-cyclization, Cochran and Michael used a hypervalent iodine reagent, iodosobenzene (PhIO), in an intramolecular oxo-amination reaction to achieve the selective synthesis of bicyclic iso-ureas 26 from olefinic N-tosylureas 25 [55]. The authors proposed a reaction mechanism in which the iodine(III) reagent, PhIOTMS(OTf), derived from the reaction of PhIO with trimethylsilyl triflate (TMSOTf) contributes to the generation of an iodonium(III) ion ( Figure 14). In this reaction mechanism, it can be determined that the selective O-cyclization reaction proceeds via a second intermediate generated by the 5-exo-cyclization of the nitrogen at the urea moiety of the iodonium intermediate. Due to the high nucleophilicity of the oxygen atom, O-cyclization preferentially takes place under strongly acidic conditions. O-cyclization is favored even more under weakly acidic conditions, such as in acetic acid, but the product yield is very low. On the other hand, Muñiz and co-workers selectively synthesized N-cyclized bicyclic ureas 26′ via an intramolecular diamination reaction using IPy2BF4 [56]. Their method, in which a highly reactive iodonium intermediate is proposed, achieves excellent yield and high selectivity, despite high temperature conditions being used. A method for synthesizing a similar bicyclic compound via temperaturedependent O/N atom-selective cyclization has also been reported [57]. Li and Widenhoefer developed the O/N atom-selective cyclizations of olefinic N-tosyl-ureas 27 using NIS [58]. Reaction conditions using AgOTf gave bicyclic isoureas 28 via O-cyclization, whereas the use of NaHCO3 instead afforded bicyclic ureas 28′ via N-cyclization ( Figure 15). In either case, the iodo-amino-cyclization reaction in the first step produces a monocyclic intermediate, and the additive strongly affects the O/N selectivity at a second cyclization step. It is worth mentioning that AgOTf efficiently promotes a second-stage nucleophilic substitution-type cyclization. The corresponding bromo-substituted version has been reported, which shows the same trend in selectivity [59]. Li and Widenhoefer developed the O/N atom-selective cyclizations of olefinic N-tosyl-ureas 27 using NIS [58]. Reaction conditions using AgOTf gave bicyclic isoureas 28 via O-cyclization, whereas the use of NaHCO 3 instead afforded bicyclic ureas 28 via N-cyclization ( Figure 15). In either case, the iodo-amino-cyclization reaction in the first step produces a monocyclic intermediate, and the additive strongly affects the O/N selectivity at a second cyclization step. It is worth mentioning that AgOTf efficiently promotes a second-stage nucleophilic substitution-type cyclization. The corresponding bromo-substituted version has been reported, which shows the same trend in selectivity [59].
using NIS [58]. Reaction conditions using AgOTf gave bicyclic isoureas 28 via O-cyclization, whereas the use of NaHCO3 instead afforded bicyclic ureas 28′ via N-cyclization ( Figure 15). In either case, the iodo-amino-cyclization reaction in the first step produces a monocyclic intermediate, and the additive strongly affects the O/N selectivity at a second cyclization step. It is worth mentioning that AgOTf efficiently promotes a second-stage nucleophilic substitution-type cyclization. The corresponding bromo-substituted version has been reported, which shows the same trend in selectivity [59].

Ene/Diene Selective Cyclizations
The Wada group synthesized different five-membered heterocycles via the iodination of alkynyl carbamates ( Figure 16). Applying NIS to propargylic hydrazides 29 in the presence of BF 3 ·OEt 2 afforded pyrazoles 30, while the use of bis(2,4,6-collidine)iodonium(I) hexafluorophosphate (I(coll) 2 PF 6 ) gave dihydropyrazoles 30 [60]. Similar treatment of N-alkoxycarbonyl propargylic hydroxylamines 31 selectively yielded isoxazoles 32 and 2,5-dihydroisoxazoles 32 [61]. Although the application of I(coll) 2 PF 6 to α-propargylic glycine 33 gave pyrroles 34, the use of bis(pyridine)iodonium(I) hexafluorophosphate (IPy 2 PF 6 ) resulted in 2,3-dihydropyrroles 34 [62]. In the course of three switchable reactions, the authors proposed that the 5-endo-cyclization of iodonium ion intermediates, generated by the electrophilic addition of iodine cations to alkyne moieties, gave heterocycles 30 , 32 , and 34 . These heterocycles then underwent deiodination, which was followed by iodination to produce the aromatized products 30, 32, and 34, respectively ( Figure 17).    Gao and co-workers achieved the base-dependent selective synthesis of oxazoles 36 and oxazolines 36′ via the oxidative cyclization of β-acylamino ketones 35 in the presence of an iodine catalyst [63]. When K2CO3 was used as a base, oxazolines 36′, in the form of enes, were produced. In contrast, treatment with 1,8-diazabicyclo [5.4.0]undec-7-ene (DBU) instead of K2CO3 led to the formation of oxazoles 36, in the form of aromatics. The authors proposed a reaction mechanism in which the active high-valent iodine species, [IO] − I + generated from tert-butyl hydroperoxide (TBHP), and I2 under basic conditions, was introduced to the substrates, triggering intramolecular nucleophilic substitution ( Figure 18). The O-cyclization reaction at the amide moiety, thus, gave oxazoline products 36′. In addition, the authors explained that DBU promotes further iodination and subsequent deiodination for the production of oxazoles 36. Gao and co-workers achieved the base-dependent selective synthesis of oxazoles 36 and oxazolines 36 via the oxidative cyclization of β-acylamino ketones 35 in the presence of an iodine catalyst [63]. When K 2 CO 3 was used as a base, oxazolines 36 , in the form of enes, were produced. In contrast, treatment with 1,8-diazabicyclo [5.4.0]undec-7-ene (DBU) instead of K 2 CO 3 led to the formation of oxazoles 36, in the form of aromatics. The authors proposed a reaction mechanism in which the active high-valent iodine species, [IO] − I + generated from tert-butyl hydroperoxide (TBHP), and I 2 under basic conditions, was introduced to the substrates, triggering intramolecular nucleophilic substitution ( Figure 18). The O-cyclization reaction at the amide moiety, thus, gave oxazoline products 36 . In addition, the authors explained that DBU promotes further iodination and subsequent deiodination for the production of oxazoles 36. The Zhang group developed the selective synthesis of two cyclic formamidinium salts via the iodo-amino-cyclization of N-alkenyl formamidines 37 in the presence of an iodinating agent [64]. Imidazoles 38 were obtained upon treatment with NIS, while the formation of non-aromatic heterocycles 38′ instead proceeded via iodo-amino-cyclization using iodine ( Figure 19). They also demonstrated that 6-membered and 7-membered rings could be formed using the same method. The Zhang group developed the selective synthesis of two cyclic formamidinium salts via the iodo-amino-cyclization of N-alkenyl formamidines 37 in the presence of an iodinating agent [64]. Imidazoles 38 were obtained upon treatment with NIS, while the formation of non-aromatic heterocycles 38 instead proceeded via iodo-amino-cyclization using iodine ( Figure 19). They also demonstrated that 6-membered and 7-membered rings could be formed using the same method.
The Zhang group developed the selective synthesis of two cyclic formamidinium salts via the iodo-amino-cyclization of N-alkenyl formamidines 37 in the presence of an iodinating agent [64]. Imidazoles 38 were obtained upon treatment with NIS, while the formation of non-aromatic heterocycles 38′ instead proceeded via iodo-amino-cyclization using iodine ( Figure 19). They also demonstrated that 6-membered and 7-membered rings could be formed using the same method. Figure 19. The selective synthesis of cyclic formamidinium salts 38 and 38′ via iodo-amino-cyclization of N-alkenyl formamidines 37 using iodine reagents.

Syn/Anti Selective Cyclizations
Yeung and co-workers reported switchable syn/anti selective bromolactonizations of cyclopropyl diesters 39 [65]. The use of cyclopropanes as substrates in bromocyclizations is noteworthy in this study in which the chalcogenide catalysts, Ph3PS and Ph2PSe, play important roles in the activation of the cyclopropane moiety in the substrates. In this method, the use of Ph3PS in the presence of N-bromosuccinimide (NBS) gave anti-form lactones 40, whereas the use of Ph2PSe gave syn-form lactones 40′ (Figure 20). Although a detailed reaction mechanism remains to be revealed, it was suggested that the observed anti-selectivity might be influenced by the interaction that takes place between the Ph2Se chalcogenide catalyst and the ester group in the substrate.

Syn/Anti Selective Cyclizations
Yeung and co-workers reported switchable syn/anti selective bromolactonizations of cyclopropyl diesters 39 [65]. The use of cyclopropanes as substrates in bromocyclizations is noteworthy in this study in which the chalcogenide catalysts, Ph 3 PS and Ph 2 PSe, play important roles in the activation of the cyclopropane moiety in the substrates. In this method, the use of Ph 3 PS in the presence of N-bromosuccinimide (NBS) gave anti-form lactones 40, whereas the use of Ph 2 PSe gave syn-form lactones 40 ( Figure 20). Although a detailed reaction mechanism remains to be revealed, it was suggested that the observed anti-selectivity might be influenced by the interaction that takes place between the Ph 2 Se chalcogenide catalyst and the ester group in the substrate.

Enantioselective Cyclizations
The Takano group previously reported useful synthetic intermediates for the production of trans-caronaldehydes and cis-caronaldehydes, which are important starting materials for use in the syntheses of many potent pyrethroid insecticides [66]. When (2S)-N-pent-4′-enoylproline 41 was treated with I2 in a mixture of MeCN and an aqueous alkaline solution, (S)-iodolactone 42 was obtained. However, treatment with I2 in aqueous THF gave the (R)-isomer 42′ in low enantioselectivity ( Figure 21). The control mechanism of this early-reported enantioselective switch in iodolactonizations remains somewhat unclear.

Enantioselective Cyclizations
The Takano group previously reported useful synthetic intermediates for the production of trans-caronaldehydes and cis-caronaldehydes, which are important starting materials for use in the syntheses of many potent pyrethroid insecticides [66]. When (2S)-N-pent-4 -enoylproline 41 was treated with I 2 in a mixture of MeCN and an aqueous alkaline solution, (S)-iodolactone 42 was obtained. However, treatment with I 2 in aqueous THF gave the (R)-isomer 42 in low enantioselectivity ( Figure 21). The control mechanism of this early-reported enantioselective switch in iodolactonizations remains somewhat unclear.

Enantioselective Cyclizations
The Takano group previously reported useful synthetic intermediates for the production of trans-caronaldehydes and cis-caronaldehydes, which are important starting materials for use in the syntheses of many potent pyrethroid insecticides [66]. When (2S)-N-pent-4′-enoylproline 41 was treated with I2 in a mixture of MeCN and an aqueous alkaline solution, (S)-iodolactone 42 was obtained. However, treatment with I2 in aqueous THF gave the (R)-isomer 42′ in low enantioselectivity ( Figure 21). The control mechanism of this early-reported enantioselective switch in iodolactonizations remains somewhat unclear. Borthan and co-workers developed solvent-dependent enantioselective chlorocyclizations of olefinic carbamates 43 in the presence of a hydroquinidine 1,4-phthalazinediyl diether ((DHQD)2PHAL) catalyst and 1,3-dichloro-5,5-dimethylhydantoin (DCDMH) [67]. When n PrOH was used as the solvent, (S)-form chlorolactones 44 were preferentially obtained ( Figure 22). The addition Borthan and co-workers developed solvent-dependent enantioselective chlorocyclizations of olefinic carbamates 43 in the presence of a hydroquinidine 1,4-phthalazinediyl diether ((DHQD) 2 PHAL) catalyst and 1,3-dichloro-5,5-dimethylhydantoin (DCDMH) [67]. When n PrOH was used as the solvent, (S)-form chlorolactones 44 were preferentially obtained ( Figure 22). The addition of benzoic acid increased the enantioselectivity. However, this was not simply achieved by the effect of the acid. On the other hand, the use of CHCl 3 preferentially gave (R)-isomers 44 . It was confirmed that mixing hexane with CHCl 3 resulted in good enantiomeric excesses and product yields. An enthalpy-entropy trade-off was suggested to play a central role in the prominent solvent-dependent stereo-discrimination seen in the reactions. That is, the stereoselectivity of the (S)-selective cyclizations in alcoholic solvent was dominated by the variation in the activation enthalpy, whereas the activation entropy governed the stereo-discrimination for the (R)-selective cyclizations in CHCl 3 /hexane solvent. The Zhao group developed switchable enantioselective chlorocyclizations of aryl-tethered diolefins 45 [68]. The combination of (DHQD)2PHAL and DCDMH was applied to the synthesis of R chiral hexahydrophenalene 46 ( Figure 23). However, the (S)-isomer 46′ can be obtained by combining a chiral sulfide catalyst and 1,3-dichloro-5,5-diphenylhydantoin (DCDPH). Although the details of the reaction mechanism are still unknown, the formation of an anion bridge in the chloronium ion intermediate using a chiral sulfide catalyst is considered to enhance the stereo-selectivity. The Yeung group developed cinchona alkaloid-based chiral amino-thiocarbamate-catalyzed enantioselective bromo-amino-cyclizations [69]. In this method, (R)-bromocyclic amines 48 can be preferentially obtained from olefinic amines 47 ( Figure 24). Chiral amino-thiocarbamates have been proposed as bifunctional catalysts, which activate both nucleophilic and electrophilic moieties in the substrate via hydrogen bonding or ion pairing. The Ishihara group reported a 1,1′-bi-2-naphthol (BINOL)-derived chiral amido-phosphate catalyst that produces (S)-bromo-and iodocyclic amines The Zhao group developed switchable enantioselective chlorocyclizations of aryl-tethered diolefins 45 [68]. The combination of (DHQD) 2 PHAL and DCDMH was applied to the synthesis of R chiral hexahydrophenalene 46 ( Figure 23). However, the (S)-isomer 46 can be obtained by combining a chiral sulfide catalyst and 1,3-dichloro-5,5-diphenylhydantoin (DCDPH). Although the details of the reaction mechanism are still unknown, the formation of an anion bridge in the chloronium ion intermediate using a chiral sulfide catalyst is considered to enhance the stereo-selectivity. The Yeung group developed cinchona alkaloid-based chiral amino-thiocarbamate-catalyzed enantioselective bromo-amino-cyclizations [69]. In this method, (R)-bromocyclic amines 48 can be preferentially obtained from olefinic amines 47 ( Figure 24). Chiral amino-thiocarbamates have been proposed as bifunctional catalysts, which activate both nucleophilic and electrophilic moieties in the substrate via hydrogen bonding or ion pairing. The Ishihara group reported a 1,1 -bi-2-naphthol (BINOL)-derived chiral amido-phosphate catalyst that produces (S)-bromo-and iodocyclic amines 48 from olefinic amines 47 with high selectivity [70]. The key factor of the stereoselectivity in this catalyst is considered to be the asymmetrical open space with respect to the intramolecular nucleophilic moiety in the bromonium ion intermediate bound to the halogenation catalyst. In the iodo-amino-cyclization, it has been proposed that the double activation of the halogen molecule by highly active iodination species were generated from N-halosuccinimide and the catalyst.

Other Miscellaneous Reactions
Ranganathan and co-workers observed pH-dependent regioselectivity in the bromolactonization of 5-norbornene-2,3-dicarboxylic acid 49 using bromine [71]. The tertiary carboxyl bromo-lactone 50 and the secondary carboxyl isomer 50′ were synthesized by the bromolactonization reaction at pH 8.3 and pH 3-4, respectively ( Figure 25). The pH is maintained at 3-4 by the buffering capacity of the substrate itself. The authors explained that steric bulk effects are prominently observed under acidic conditions, while the electronic pKa is the controlling factor under basic conditions. Askani and Keller developed a halogen species-dependent selective halo-lactonization of cyclobetenoic acid 51 [72]. Highly-strained bicyclo[2.2.0]lactone 52 was obtained in excellent yield by treating cyclo-betenoic acid 51 with bromine ( Figure 26). Meanwhile, a five-membered lactone with an expanded ring size (52′) was obtained via the formation of a open chain diene upon the treatment of cyclobetenoic acid 51 with iodine. Here, the iodo-lactonization was a slow process compared to the bromo-lactonization.

Other Miscellaneous Reactions
Ranganathan and co-workers observed pH-dependent regioselectivity in the bromo-lactonization of 5-norbornene-2,3-dicarboxylic acid 49 using bromine [71]. The tertiary carboxyl bromo-lactone 50 and the secondary carboxyl isomer 50 were synthesized by the bromo-lactonization reaction at pH 8.3 and pH 3-4, respectively ( Figure 25). The pH is maintained at 3-4 by the buffering capacity of the substrate itself. The authors explained that steric bulk effects are prominently observed under acidic conditions, while the electronic pKa is the controlling factor under basic conditions.

Other Miscellaneous Reactions
Ranganathan and co-workers observed pH-dependent regioselectivity in the bromolactonization of 5-norbornene-2,3-dicarboxylic acid 49 using bromine [71]. The tertiary carboxyl bromo-lactone 50 and the secondary carboxyl isomer 50′ were synthesized by the bromolactonization reaction at pH 8.3 and pH 3-4, respectively ( Figure 25). The pH is maintained at 3-4 by the buffering capacity of the substrate itself. The authors explained that steric bulk effects are prominently observed under acidic conditions, while the electronic pKa is the controlling factor under basic conditions. Askani and Keller developed a halogen species-dependent selective halo-lactonization of cyclobetenoic acid 51 [72]. Highly-strained bicyclo[2.2.0]lactone 52 was obtained in excellent yield by treating cyclo-betenoic acid 51 with bromine ( Figure 26). Meanwhile, a five-membered lactone with an expanded ring size (52′) was obtained via the formation of a open chain diene upon the treatment of cyclobetenoic acid 51 with iodine. Here, the iodo-lactonization was a slow process compared to the bromo-lactonization. Askani and Keller developed a halogen species-dependent selective halo-lactonization of cyclobetenoic acid 51 [72]. Highly-strained bicyclo[2.2.0]lactone 52 was obtained in excellent yield by treating cyclo-betenoic acid 51 with bromine ( Figure 26). Meanwhile, a five-membered lactone with an expanded ring size (52 ) was obtained via the formation of a open chain diene upon the treatment of cyclobetenoic acid 51 with iodine. Here, the iodo-lactonization was a slow process compared to the bromo-lactonization.
Askani and Keller developed a halogen species-dependent selective halo-lactonization of cyclobetenoic acid 51 [72]. Highly-strained bicyclo[2.2.0]lactone 52 was obtained in excellent yield by treating cyclo-betenoic acid 51 with bromine ( Figure 26). Meanwhile, a five-membered lactone with an expanded ring size (52′) was obtained via the formation of a open chain diene upon the treatment of cyclobetenoic acid 51 with iodine. Here, the iodo-lactonization was a slow process compared to the bromo-lactonization. In 2008, Wu and Ding reported a synthetic method for 4-haloisoquinoline N-oxides 54 that proceeds via the endo-halocyclization of 2-alkynylbenzaldoximes 53 [73]. In terms of the electrophile used in the reaction, either using Br2 or NBS as bromine sources, or I2, ICl or NIS as iodine sources, halogenated products have been produced in good yields from many substrates ( Figure 27). In 2016, In 2008, Wu and Ding reported a synthetic method for 4-haloisoquinoline N-oxides 54 that proceeds via the endo-halocyclization of 2-alkynylbenzaldoximes 53 [73]. In terms of the electrophile used in the reaction, either using Br 2 or NBS as bromine sources, or I 2 , ICl or NIS as iodine sources, halogenated products have been produced in good yields from many substrates ( Figure 27). In 2016, the Ray group re-investigated this study. As a result, it was revealed that the use of an excess of NBS leads to the formation of unusual products, 1,3-dibromo-2-aryl-1H-indenes 54 , in moderate to low yield [74]. The use of N-chlorosuccinimide (NCS) and NIS did not lead to these unusual products. Ray proposed a key pathway via the bromonium ion intermediate for nucleophilic attack by the C-center of the oxime moiety ( Figure 27). However, a causal relationship between an excess of NBS and a C-center nucleophilic attack has not yet been explained. the Ray group re-investigated this study. As a result, it was revealed that the use of an excess of NBS leads to the formation of unusual products, 1,3-dibromo-2-aryl-1H-indenes 54′, in moderate to low yield [74]. The use of N-chlorosuccinimide (NCS) and NIS did not lead to these unusual products. Ray proposed a key pathway via the bromonium ion intermediate for nucleophilic attack by the Ccenter of the oxime moiety ( Figure 27). However, a causal relationship between an excess of NBS and a C-center nucleophilic attack has not yet been explained. The Yao group reported a method for the selective synthesis of iodo-substituted isochromene derivatives 56 and naphthyl ketone derivatives 56′ via the iodo-cyclization of 2-(2-phenylethynyl) Morita-Baylis-Hillman adducts 55 using I2 [75]. Iodo-substituted isochromene derivatives 56 were obtained using I2 and K3PO4, whereas naphthyl ketone derivatives 56′ were formed upon heating in the presence of I2 ( Figure 28). For the synthesis of naphthyl ketone derivatives 56′, they proposed a mechanistic pathway involving iodo-substituted isochromene derivatives 56 as the intermediates. The reason for the suppression of the conversion of isochromenes 56 to naphthalenes 56′ may be that the protons catalyzing the Michael addition of α,β-unsaturated ketone moieties are removed by the addition of bases. The Yao group reported a method for the selective synthesis of iodo-substituted isochromene derivatives 56 and naphthyl ketone derivatives 56 via the iodo-cyclization of 2-(2-phenylethynyl) Morita-Baylis-Hillman adducts 55 using I 2 [75]. Iodo-substituted isochromene derivatives 56 were obtained using I 2 and K 3 PO 4 , whereas naphthyl ketone derivatives 56 were formed upon heating in the presence of I 2 ( Figure 28). For the synthesis of naphthyl ketone derivatives 56 , they proposed a mechanistic pathway involving iodo-substituted isochromene derivatives 56 as the intermediates. The reason for the suppression of the conversion of isochromenes 56 to naphthalenes 56 may be that the protons catalyzing the Michael addition of α,β-unsaturated ketone moieties are removed by the addition of bases. obtained using I2 and K3PO4, whereas naphthyl ketone derivatives 56′ were formed upon heating in the presence of I2 ( Figure 28). For the synthesis of naphthyl ketone derivatives 56′, they proposed a mechanistic pathway involving iodo-substituted isochromene derivatives 56 as the intermediates. The reason for the suppression of the conversion of isochromenes 56 to naphthalenes 56′ may be that the protons catalyzing the Michael addition of α,β-unsaturated ketone moieties are removed by the addition of bases.

Substrate-Switchable Cyclizations
As a chemical reaction progresses, the structure of the substrate dictates its fate and reactivity. In order to explore a new avenue, the substrate structure should be appropriately modified in the preceding step before any further reactions are carried out. For example, partial modification of substrate structures such as isomers and the introduction of protecting groups sometimes reflects the differences between the product structure and the course of the reaction. This section, thus, introduces substrate-switchable reactions that can be used to selectively synthesize two or more products via substrate control. The reaction conditions in the synthesis of each structural isomer are usually the same, except in some cases. In the case of switchable intramolecular cyclizations, the halogenating agent functions as a trigger for the generation of the reaction intermediates in which the organocatalyst used contributes toward the precise intermediate formation.

Endo/exo Selective Cyclizations
Denmark and Burk showed that Lewis base catalysts containing sulfur and phosphorus atoms dramatically accelerate the reaction rate of halocyclizations of olefinic acids and alkenols using NBS and NIS as halogen sources [76]. In addition, they realized high endo/exo selectivity in bromolactonizations and halocycloetherificaions depending on the cis/trans regio-differences of the substrates. In a substrate that has a conjugated substituent on the alkene moiety, endo-cyclization is preferred over exo-cyclization due to the high stability of the positive charge localized on the benzylic carbon. However, exo-cyclized product 58 was preferentially obtained by applying (Me 2 N) 3 PS in the bromolactonization of Z-olefinic acid 57 (Figure 29a). (Me 2 N) 3 PS was used to reduce the positive charge localized on the electrophilic carbon. However, in the bromo-cyclo-etherification of a substrate without a conjugated substituent, exo-cyclization of Z-alkenols 59 was preferential over endo-cyclization. To this end, the application of ( n Bu) 3 PS and I 2 to the iodocycloetherification of E-alkenols 59 was valid in the selectivity of endo-cyclization (Figure 29b).
carbon. However, exo-cyclized product 58′ was preferentially obtained by applying (Me2N)3PS in the bromolactonization of Z-olefinic acid 57′ (Figure 29a). (Me2N)3PS was used to reduce the positive charge localized on the electrophilic carbon. However, in the bromo-cyclo-etherification of a substrate without a conjugated substituent, exo-cyclization of Z-alkenols 59′ was preferential over endocyclization. To this end, the application of ( n Bu)3PS and I2 to the iodocycloetherification of E-alkenols 59 was valid in the selectivity of endo-cyclization (Figure 29b). Yeung et al. developed a highly effective amino-thiocarbamate organocatalyst for the selective bromo-lactonization of monosubstituted olefinic acids. This catalyst showed high endo/exo selectivity and enantioselectivity depending on the regiostructure of the substrate. In bromolactonization using an amino-thiocarbamate catalyst and NBS, E-form olefinic acids 61 were converted to endo-cyclized products 62 [77], while Z-isomers 61′ produced exo-cyclized products 62′ [78]. The authors speculated that this catalyst is essentially bifunctional. The thiocarbamate moiety thus activates NBS and the quinidine moiety enhances the nucleophilicity of the carboxyl group in the substrate (Figure 30). Yeung et al. developed a highly effective amino-thiocarbamate organocatalyst for the selective bromo-lactonization of monosubstituted olefinic acids. This catalyst showed high endo/exo selectivity and enantioselectivity depending on the regiostructure of the substrate. In bromo-lactonization using an amino-thiocarbamate catalyst and NBS, E-form olefinic acids 61 were converted to endo-cyclized products 62 [77], while Z-isomers 61 produced exo-cyclized products 62 [78]. The authors speculated that this catalyst is essentially bifunctional. The thiocarbamate moiety thus activates NBS and the quinidine moiety enhances the nucleophilicity of the carboxyl group in the substrate ( Figure 30). Meanwhile, Hara and co-workers developed a spyridyl phosphoramide catalyst that is effective for the selective bromo-lactonization of disubstituted olefinic acid. This organocatalyst furnished high endo/exo-selectivities and enantio-selectivities depending on the substituents present in the substrate [79]. Whether endo-selectivities or exo-selectivities are promoted in reactions potentially relies on the position of the aryl group as the conjugated substituent attached to the alkene moiety to enhance the stability of the localized positive charge. In the same study, 6-arylsubstituted and 5arylsubstituted olefinic acids (63 and 63′) were selectively obtained as endo-cyclized and exo-cyclized products (64 and 64′), respectively ( Figure 31). This result implies that the endo/exo selectivity corresponds to the bonding position of the aryl group. In plausible reaction mechanisms, the dimethylamine moiety and another nitrogen atom in the pyridyl phosphoramide catalyst were proposed as a carboxyl group and NBS binding sites. Furthermore, the results show that the Meanwhile, Hara and co-workers developed a spyridyl phosphoramide catalyst that is effective for the selective bromo-lactonization of disubstituted olefinic acid. This organocatalyst furnished high endo/exo-selectivities and enantio-selectivities depending on the substituents present in the substrate [79]. Whether endo-selectivities or exo-selectivities are promoted in reactions potentially relies on the position of the aryl group as the conjugated substituent attached to the alkene moiety to enhance the stability of the localized positive charge. In the same study, 6-arylsubstituted and 5-arylsubstituted olefinic acids (63 and 63 ) were selectively obtained as endo-cyclized and exo-cyclized products (64 and 64 ), respectively ( Figure 31). This result implies that the endo/exo selectivity corresponds to the bonding position of the aryl group. In plausible reaction mechanisms, the dimethylamine moiety and another nitrogen atom in the pyridyl phosphoramide catalyst were proposed as a carboxyl group and NBS binding sites. Furthermore, the results show that the brominating reagent affects the enantioselectivity of the reaction, which suggested that the brominating agent plays a role in the transition state. Shirakawa and co-workers developed an efficient chiral sulfide organocatalyst for the selective bromo-lactonization of a stilbene-type carboxylic acid. This catalyst showed high endo/exo selectivity and moderate enantioselectivity depending on the substituents present in the substrates. Substrates possessing electron-donating substituents at the non-nucleophilic aryl moiety (65) undergo endo-cyclization [80], while those possessing electron-withdrawing substituents (65 ) undergo exo-cyclization [81]. This endo/exo selectivity was, thus, determined to be governed by the electronic factors of the aryl moiety. The sulfide catalyst is bifunctional, with a urea site for binding to the brominating reagents such as NBS and dibromoisocyanuric acid (DBI), as well as a sulfide site that can promote bromination ( Figure 32). The authors proposed that bromosulfonium species and a Brønsted base are simultaneously generated via the rearrangement of the bromonium ion to the sulfide site in a complex of the brominating agent with the catalyst, effectively resulting in an intramolecular nucleophilic reaction. The chiral sulfide catalyst also contributes to the high degree of control of the enantio-selectivity. Li and co-workers developed an amidyl radical cyclization reaction for the regioselective halolactamizations of halovinyl amides (67 and 67 ) and the regioselective haloaminocyclizations of halovinyl sulfonamides (69 and 69 ). Usually, generation of an amidyl radical results in a decrease in regioselectivity. However, the radical-stabilizing effect of a vinylic halogen substitute allows high endo/exo regioselectivity to be realized. In the halolactamization [82] and haloaminocyclization reactions [83], the authors used Pb(OAc) 4 and PhI(OAc) 2 , respectively. These reactions are started with photo-stimulation in the presence of I 2 ( Figure 33). Removal of the halogen substituent from the substrate resulted in reduced regioselectivity and contamination of the lactone product formed via the ionic mechanism. Figure 32. Endo/exo selective bromo-lactonizations of stilbene-type carboxylic acids (65 and 65′) using a chiral sulfide catalyst.
Li and co-workers developed an amidyl radical cyclization reaction for the regioselective halolactamizations of halovinyl amides (67 and 67′) and the regioselective haloaminocyclizations of halovinyl sulfonamides (69 and 69′). Usually, generation of an amidyl radical results in a decrease in regioselectivity. However, the radical-stabilizing effect of a vinylic halogen substitute allows high endo/exo regioselectivity to be realized. In the halolactamization [82] and haloaminocyclization reactions [83], the authors used Pb(OAc)4 and PhI(OAc)2, respectively. These reactions are started with photo-stimulation in the presence of I2 (Figure 33). Removal of the halogen substituent from the substrate resulted in reduced regioselectivity and contamination of the lactone product formed via the ionic mechanism.  Li and Liu developed the regioselective halo-amino-cyclizations of olefinic amines (71 and 71 ) using a hypervalent iodine reagent, PhI(OAc) 2 . In this method, endo/exo regioselectivity was controlled by the amine protection groups [84]. When a benzyl group or its derivative was used as a protecting group, endo-cyclized products 72, were selectively produced, while the use of a sulfonamide-based protecting group selectively gave exo-cyclized products 72 ( Figure 34). PhI(OAc) 2 plays a role in activating the olefinic moiety. It was determined that, in this method, any halogen atom can be easily introduced using an arbitrary inorganic halogen salt. In the endo-cyclization process, the authors showed that the reaction mechanism proceeds via an exo-cyclization intermediate. The rate-determining factor in the endo-cyclized ring was, thus, interpreted to be related to the formation of a bicycle intermediate during dehalo-cyclizations.
Borhan et al. used (DHQD) 2 PHAL in the chloro-cyclizations of olefinic amides (73 and 73 ), and reported a selective synthetic method for oxazines 74 and oxazolines 74 . The use of DCDPH as a halogen source in trifluoroethanol solvent required low temperature conditions [85], and the use of TsNNaCl trihydrate enabled the reactions to be performed at room temperature [86]. Both methods afforded the products in excellent yields with high enantioselectivities. The endo-cyclized products 74 and exo-cyclized products 74 were selectively obtained from disubstituted butanoic amides 73 and monosubstituted butanoic amides 73 , respectively ( Figure 35).
The Yeung group developed the selective synthesis of oxazines 76 and oxazolines 76 using a Lewis base sulfide catalyst for the bromocyclizations of cyclopropyl amides (75 and 75 ). In this method, 1,3-dibromo-5,5-dimethylhydantoin (DBH) can be used as a halogen source at room temperature, and the endo/exo selectivity is dependent on the regio-isomeric structure of the substrate [87]. Using 1,2-substituted cyclopropyl amides 75 and 1,1-substituted cyclopropyl amides 75 , the oxazines 76 via endo-cyclized products and oxazolines 76 via exo-cyclized products were selectively obtained, respectively ( Figure 36). The cyclizations were not inhibited, even for reactions carried out in the presence water. However, the reactions were carried out under dehydrated conditions in the presence of 4Å molecular sieves. The authors explained the reaction mechanism, in which bromonium-like or carbocation intermediates generated by activation of a Lewis base sulfide catalyst-bromo cation complex at the cyclopropane moiety are nucleophilically attacked by an amide moiety.
Li and Liu developed the regioselective halo-amino-cyclizations of olefinic amines (71 and 71′) using a hypervalent iodine reagent, PhI(OAc)2. In this method, endo/exo regioselectivity was controlled by the amine protection groups [84]. When a benzyl group or its derivative was used as a protecting group, endo-cyclized products 72, were selectively produced, while the use of a sulfonamide-based protecting group selectively gave exo-cyclized products 72′ (Figure 34). PhI(OAc)2 plays a role in activating the olefinic moiety. It was determined that, in this method, any halogen atom can be easily introduced using an arbitrary inorganic halogen salt. In the endocyclization process, the authors showed that the reaction mechanism proceeds via an exo-cyclization intermediate. The rate-determining factor in the endo-cyclized ring was, thus, interpreted to be related to the formation of a bicycle intermediate during dehalo-cyclizations.  (73 and 73′), and reported a selective synthetic method for oxazines 74 and oxazolines 74′. The use of DCDPH as a halogen source in trifluoroethanol solvent required low temperature conditions [85], and the use of TsNNaCl trihydrate enabled the reactions to be performed at room temperature [86]. Both methods afforded the products in excellent yields with high enantioselectivities. The endo-cyclized products 74 and exo-cyclized products 74′ were selectively obtained from disubstituted butanoic amides 73 and monosubstituted butanoic amides 73′, respectively ( Figure 35).  cyclization process, the authors showed that the reaction mechanism proceeds via an exo-cyclization intermediate. The rate-determining factor in the endo-cyclized ring was, thus, interpreted to be related to the formation of a bicycle intermediate during dehalo-cyclizations.  (73 and 73′), and reported a selective synthetic method for oxazines 74 and oxazolines 74′. The use of DCDPH as a halogen source in trifluoroethanol solvent required low temperature conditions [85], and the use of TsNNaCl trihydrate enabled the reactions to be performed at room temperature [86]. Both methods afforded the products in excellent yields with high enantioselectivities. The endo-cyclized products 74 and exo-cyclized products 74′ were selectively obtained from disubstituted butanoic amides 73 and monosubstituted butanoic amides 73′, respectively ( Figure 35). method, 1,3-dibromo-5,5-dimethylhydantoin (DBH) can be used as a halogen source at room temperature, and the endo/exo selectivity is dependent on the regio-isomeric structure of the substrate [87]. Using 1,2-substituted cyclopropyl amides 75 and 1,1-substituted cyclopropyl amides 75′, the oxazines 76 via endo-cyclized products and oxazolines 76′ via exo-cyclized products were selectively obtained, respectively ( Figure 36). The cyclizations were not inhibited, even for reactions carried out in the presence water. However, the reactions were carried out under dehydrated conditions in the presence of 4Å molecular sieves. The authors explained the reaction mechanism, in which bromonium-like or carbocation intermediates generated by activation of a Lewis base sulfide catalyst-bromo cation complex at the cyclopropane moiety are nucleophilically attacked by an amide moiety. Hamashima and Kawato developed a useful phosphorous catalyst for the selective bromocyclizations of dienyl amides (77 and 77′). The use of di-tert-butylmethoxyphenyl (DTBM) -2,2′-bis(diphenylphosphino)-1,1′-binaphthyl (BINAP) monoxide as a phosphorous catalyst in the presence of NBS provided the desired cyclization products in excellent yields with high enantioselectivities [88]. The controlling factor of this endo/exo selectivity was determined to be the substituent of the olefinic moiety in the substrate, and, thus, aryl substituents and alkyl phosphates gave oxazines 78 as endo-cyclized products and oxazolines 78′ as exo-cyclized products, respectively Hamashima and Kawato developed a useful phosphorous catalyst for the selective bromocyclizations of dienyl amides (77 and 77 ). The use of di-tert-butylmethoxyphenyl (DTBM) -2,2 -bis(diphenylphosphino)-1,1 -binaphthyl (BINAP) monoxide as a phosphorous catalyst in the presence of NBS provided the desired cyclization products in excellent yields with high enantioselectivities [88]. The controlling factor of this endo/exo selectivity was determined to be the substituent of the olefinic moiety in the substrate, and, thus, aryl substituents and alkyl phosphates gave oxazines 78 as endo-cyclized products and oxazolines 78 as exo-cyclized products, respectively ( Figure 37). The authors proposed a reaction mechanism in which the Lewis basic site, P=O, activates NBS and the resulting P + OBr moiety contributes to the chiral transfer of a bromo cation to the olefinic moiety of the substrate. This involves the independent activation of the olefinic moiety by the phosphorus catalyst. Their study is, to the best of our knowledge, the first successful de-symmetrization of prochiral dienyl amides.

O/N Atom-Selective Cyclizations
In 1989, Brinkmeyer and co-workers tried to develop a method for constructing the lactam ring based on bromo-lactonization using NBS. The lactams 80 were obtained from bromo-lactonization of olefinic amides bearing heterocyclic aromatics as nitrogen substituents (79 ). However, changing the nitrogen substituents to carbocyclic aromatics from heterocyclic aromatics gave unexpected lactones 80 ( Figure 38) [89]. The authors concluded these results to be failures in terms of lactam formation because the lactones are O-cyclized products that have undergone hydrolysis. This study represents a pioneering example of O/N atom-selective cyclizations.

O/N Atom-Selective Cyclizations
In 1989, Brinkmeyer and co-workers tried to develop a method for constructing the lactam ring based on bromo-lactonization using NBS. The lactams 80′ were obtained from bromo-lactonization of olefinic amides bearing heterocyclic aromatics as nitrogen substituents (79′). However, changing the nitrogen substituents to carbocyclic aromatics from heterocyclic aromatics gave unexpected lactones 80 (Figure 38) [89]. The authors concluded these results to be failures in terms of lactam formation because the lactones are O-cyclized products that have undergone hydrolysis. This study represents a pioneering example of O/N atom-selective cyclizations.  [90]. The fact that the O/N selectivity can be controlled according to the position of the halogen atom substituent is particularly noteworthy (Figure 39). The authors concluded that the halocyclization of olefinic amides is likely to proceed via iodonium ion transfer. As a plausible mechanism, the authors proposed that there is the oxidative formation of an N-I bond followed by hetero-cleavage and transfer of an intramolecular iodonium ion to a double bond to generate a bridged iodonium intermediate, ION. An important factor that contributes to the O/N selectivity is the effect of lone pair repulsion. When the nucleophilic moiety in the molecule approaches the internal carbon atom of the halogen-bonded  [90]. The fact that the O/N selectivity can be controlled according to the position of the halogen atom substituent is particularly noteworthy (Figure 39). The authors concluded that the halocyclization of olefinic amides is likely to proceed via iodonium ion transfer. As a plausible mechanism, the authors proposed that there is the oxidative formation of an N-I bond followed by hetero-cleavage and transfer of an intramolecular iodonium ion to a double bond to generate a bridged iodonium intermediate, I ON . An important factor that contributes to the O/N selectivity is the effect of lone pair repulsion. When the nucleophilic moiety in the molecule approaches the internal carbon atom of the halogen-bonded iodonium intermediate I N , it experiences lone pair repulsion with the halogen atom. N-cyclization was preferential in the intramolecular cyclization reaction, involving an internal vinylic halogen substituent. This is because the repulsion of the lone pair with the oxygen atom is much stronger than that with the nitrogen atom. However, O-cyclization is usually preferential in the intramolecular nucleophilic reaction of the terminal halogen-bonded iodonium intermediate, I O , because the interaction between the halogen substituent and the nitrogen or oxygen at the nucleophilic site can be ignored. Minakata and Komatsu et al. achieved the selective synthesis of cyclic amines and azolines via iodo-cyclizations of N-substituted olefinic amines using t BuOI in situ generated from the reaction between t BuOCl and NaI (Figure 40a) [91,92]. N-tosyl substituted olefinic amines 83 gave cyclic amines 84 of various ring sizes, while N-acyl and N-thioacyl substituted olefinic amines 83′ instead produced azolines (84′) by incorporating two heteroatoms in the structures, allowing the formation of oxazolines, oxazines, thioxazolines, and thioxazines. The authors proposed that the iodonium ion of the N-sulfonamide intermediate transfers to the olefin moiety in the substrates. Similar heterocycles can be obtained using a chloramine-T/I2 system. In addition, the Liu group recently reported an eco-friendly protocol based on an I2O5/LiI system (Figure 40b) [93]. The use of this method allows a reduction in the reaction time and leads to an improvement in the yield.  N-protected amines (83, 83′, 85, and 85′).
As a selective heterocycle synthesis in the iodocyclization of alkylamides, the Wada group developed a method for O/N atom-selective cyclizations controlled by the substituent of the alkyne moiety. Treatment of silyl-(87) and aryl-functionalized substrates (87′) with IPy2PF6 at room temperature led to the formation of oxazines 88 [94] and 2,3-dihydropyrroles 88′ [62], respectively. The authors explained that the controlling factor of the O/N selectivity in these iodo-cyclizations was due to the both β-silyl and resonance effects (Figure 41). Minakata and Komatsu et al. achieved the selective synthesis of cyclic amines and azolines via iodo-cyclizations of N-substituted olefinic amines using t BuOI in situ generated from the reaction between t BuOCl and NaI (Figure 40a) [91,92]. N-tosyl substituted olefinic amines 83 gave cyclic amines 84 of various ring sizes, while N-acyl and N-thioacyl substituted olefinic amines 83 instead produced azolines (84 ) by incorporating two heteroatoms in the structures, allowing the formation of oxazolines, oxazines, thioxazolines, and thioxazines. The authors proposed that the iodonium ion of the N-sulfonamide intermediate transfers to the olefin moiety in the substrates. Similar heterocycles can be obtained using a chloramine-T/I 2 system. In addition, the Liu group recently reported an eco-friendly protocol based on an I 2 O 5 /LiI system (Figure 40b) [93]. The use of this method allows a reduction in the reaction time and leads to an improvement in the yield. Minakata and Komatsu et al. achieved the selective synthesis of cyclic amines and azolines via iodo-cyclizations of N-substituted olefinic amines using t BuOI in situ generated from the reaction between t BuOCl and NaI (Figure 40a) [91,92]. N-tosyl substituted olefinic amines 83 gave cyclic amines 84 of various ring sizes, while N-acyl and N-thioacyl substituted olefinic amines 83′ instead produced azolines (84′) by incorporating two heteroatoms in the structures, allowing the formation of oxazolines, oxazines, thioxazolines, and thioxazines. The authors proposed that the iodonium ion of the N-sulfonamide intermediate transfers to the olefin moiety in the substrates. Similar heterocycles can be obtained using a chloramine-T/I2 system. In addition, the Liu group recently reported an eco-friendly protocol based on an I2O5/LiI system (Figure 40b) [93]. The use of this method allows a reduction in the reaction time and leads to an improvement in the yield.  As a selective heterocycle synthesis in the iodocyclization of alkylamides, the Wada group developed a method for O/N atom-selective cyclizations controlled by the substituent of the alkyne moiety. Treatment of silyl-(87) and aryl-functionalized substrates (87 ) with IPy 2 PF 6 at room temperature led to the formation of oxazines 88 [94] and 2,3-dihydropyrroles 88 [62], respectively. The authors explained that the controlling factor of the O/N selectivity in these iodo-cyclizations was due to the both β-silyl and resonance effects (Figure 41).

Ene/Diene Selective Cyclizations
The Zhang group developed the selective synthesis of 2-acylindolines 90 and 2-acylindoles 90′ via the cyclizations of o-acylethyl N-substituted anilines 89 and 89′ using an I2/K2CO3 system [95]. The selectivity of both routes was dependent on the N-protection groups, and, as a result, N-Ts and N-Boc protections furnished 2-acylindolines 90 and 2-acylindoles 90′, respectively ( Figure 42). The authors proposed a reaction mechanism involving the α-iodoketone generated via the intramolecular N-I intermediate, which then contributes to the intramolecular nucleophilic substitution reaction. The N-tosyl cyclized intermediate was further deprotected and, finally, converted to 2-acylindoles 89′.

Ene/Diene Selective Cyclizations
The Zhang group developed the selective synthesis of 2-acylindolines 90 and 2-acylindoles 90′ via the cyclizations of o-acylethyl N-substituted anilines 89 and 89′ using an I2/K2CO3 system [95]. The selectivity of both routes was dependent on the N-protection groups, and, as a result, N-Ts and N-Boc protections furnished 2-acylindolines 90 and 2-acylindoles 90′, respectively ( Figure 42). The authors proposed a reaction mechanism involving the α-iodoketone generated via the intramolecular N-I intermediate, which then contributes to the intramolecular nucleophilic substitution reaction. The N-tosyl cyclized intermediate was further deprotected and, finally, converted to 2-acylindoles 89′.

Syn/Anti (Cis/Trans) Selective Cyclizations
In 1937, Tarbell and Bartlett reported the first example of β-lactone formation via a halolactonization reaction [22]. The chlorolactone obtained from the chlorination of dimethylmaleic acid sodium salt Z-3 was different in the melting point from the chlorolactone produced by a similar treatment of dimethylfumarate sodium salt E-3′. Thus, different bromo-lactones were produced using a similar preparation involving bromine. This unique preparation was interpreted as an intramolecular SN1-type nucleophilic reaction with the adjacent carboxy group that proceeded after carbocation generation. The obtained product was described as a stereoisomer, but its stereostructure was not made clear. If the halonium ion is considered as the intermediate in the halo-lactonization reaction, the sodium salts of Z-3 and E-3′ give syn-4 and anti-lactone 4′, respectively. Apart from the previously mentioned report, in 2001, the William group reinvestigated this work and showed the opposite result to the previous interpretation [23]. That is, the X-ray crystal structure analysis of the stereoisomers revealed that the use of dimethyl maleic acid Z-3 and dimethyl fumaric acid E-3′ sodium salts resulted in anti-4 and syn-lactone 4′ being produced. Based on this new result, the authors suggested a new reaction mechanism that proceeds via a three-membered cyclic lactone intermediate ( Figure 44). Rao et al. reported the cis/trans-selective synthesis of iodolactone, which is a key intermediate in the synthetic study of the C12 polyketide unit (C1-C8) of jaspamide and geodiamolides A-F [97]. While cis-iodolactone 94 was obtained as the main product from the treatment of olefinic acid 93 with I2 at −40 °C, olefinic N,N-dimethylamide 93′ preferentially reacted at room temperature to give the trans-isomer 94′ (Figure 45a). The reaction times required for both cases were also very different. For the synthesis of useful HIV-1 protease inhibitors, Trova et al. attempted the selective asymmetric synthesis of cis-lactones and trans-lactones via iodolactonization [98]. Their method relied on the reactivity differences of the substrates used to determine the selectivities of the reactions. Thus, olefinic acid 95 was treated with KI/I2/KHCO3 to give cis-lactone 96 as the main product, while

Syn/Anti (Cis/Trans) Selective Cyclizations
In 1937, Tarbell and Bartlett reported the first example of β-lactone formation via a halo-lactonization reaction [22]. The chlorolactone obtained from the chlorination of dimethylmaleic acid sodium salt Z-3 was different in the melting point from the chlorolactone produced by a similar treatment of dimethylfumarate sodium salt E-3 . Thus, different bromo-lactones were produced using a similar preparation involving bromine. This unique preparation was interpreted as an intramolecular S N 1-type nucleophilic reaction with the adjacent carboxy group that proceeded after carbocation generation. The obtained product was described as a stereoisomer, but its stereostructure was not made clear. If the halonium ion is considered as the intermediate in the halo-lactonization reaction, the sodium salts of Z-3 and E-3 give syn-4 and anti-lactone 4 , respectively. Apart from the previously mentioned report, in 2001, the William group reinvestigated this work and showed the opposite result to the previous interpretation [23]. That is, the X-ray crystal structure analysis of the stereoisomers revealed that the use of dimethyl maleic acid Z-3 and dimethyl fumaric acid E-3 sodium salts resulted in anti-4 and syn-lactone 4 being produced. Based on this new result, the authors suggested a new reaction mechanism that proceeds via a three-membered cyclic lactone intermediate ( Figure 44).

Syn/Anti (Cis/Trans) Selective Cyclizations
In 1937, Tarbell and Bartlett reported the first example of β-lactone formation via a halolactonization reaction [22]. The chlorolactone obtained from the chlorination of dimethylmaleic acid sodium salt Z-3 was different in the melting point from the chlorolactone produced by a similar treatment of dimethylfumarate sodium salt E-3′. Thus, different bromo-lactones were produced using a similar preparation involving bromine. This unique preparation was interpreted as an intramolecular SN1-type nucleophilic reaction with the adjacent carboxy group that proceeded after carbocation generation. The obtained product was described as a stereoisomer, but its stereostructure was not made clear. If the halonium ion is considered as the intermediate in the halo-lactonization reaction, the sodium salts of Z-3 and E-3′ give syn-4 and anti-lactone 4′, respectively. Apart from the previously mentioned report, in 2001, the William group reinvestigated this work and showed the opposite result to the previous interpretation [23]. That is, the X-ray crystal structure analysis of the stereoisomers revealed that the use of dimethyl maleic acid Z-3 and dimethyl fumaric acid E-3′ sodium salts resulted in anti-4 and syn-lactone 4′ being produced. Based on this new result, the authors suggested a new reaction mechanism that proceeds via a three-membered cyclic lactone intermediate ( Figure 44).  [98]. Their method relied on the reactivity differences of the substrates used to determine the selectivities of the reactions. Thus, olefinic acid 95 was treated with KI/I2/KHCO3 to give cis-lactone 96 as the main product, while For the synthesis of useful HIV-1 protease inhibitors, Trova et al. attempted the selective asymmetric synthesis of cis-lactones and trans-lactones via iodolactonization [98]. Their method relied on the reactivity differences of the substrates used to determine the selectivities of the reactions. Thus, olefinic acid 95 was treated with KI/I 2 /KHCO 3 to give cis-lactone 96 as the main product, while treatment of olefinic N,N-dimethylamide 95 with KI/I 2 selectively led to the formation of trans-lactone 96 (Figure 45b). Unfortunately, the control mechanism of the cis/trans selectivity in these reactions remains unclear.
Molecules 2020, 25, x FOR PEER REVIEW 25 of 34 treatment of olefinic N,N-dimethylamide 95′ with KI/I2 selectively led to the formation of translactone 96′ (Figure 45b). Unfortunately, the control mechanism of the cis/trans selectivity in these reactions remains unclear. Togo et al. developed the selective asymmetric synthesis of cis-lactones and trans-lactones (98 and 98′) via oxidative bromo-lactonization [99]. This method also exploited the functional differences between the substrates to determine the selectivities of the reactions. Under KBr/Oxone ® conditions, olefinic acid 97 gave cis-lactone 98 as the main product, while olefinic N,N-dimethylamide 97′ preferentially produced trans-lactone 98′ (Figure 46). It was shown that the effect of the solvent on the cis/trans selectivity is negligible [100]. In order to explain the selectivity of each of the reactions, Togo et al. suggested the following reaction mechanism based on the calculation of several transition states involved in the iodo-lactonization processes by Kürth research [101]. In the cis-selective reaction of olefinic acids 97, a highly stable diequatorial form of the reactant was preferred over the diaxial form, whereas, in the trans-selective reaction of olefinic amides 97′, the diaxial form in which the substituent adjacent to the dimethylamine moiety does not hinder the electrophilic reaction site was preferred. This selective asymmetric synthesis of cis-lactone 98 was used to achieve the first total synthesis of (+)-dubiusamine C.  Togo et al. developed the selective asymmetric synthesis of cis-lactones and trans-lactones (98 and 98 ) via oxidative bromo-lactonization [99]. This method also exploited the functional differences between the substrates to determine the selectivities of the reactions. Under KBr/Oxone ® conditions, olefinic acid 97 gave cis-lactone 98 as the main product, while olefinic N,N-dimethylamide 97 preferentially produced trans-lactone 98 ( Figure 46). It was shown that the effect of the solvent on the cis/trans selectivity is negligible [100]. In order to explain the selectivity of each of the reactions, Togo et al. suggested the following reaction mechanism based on the calculation of several transition states involved in the iodo-lactonization processes by Kürth research [101]. In the cis-selective reaction of olefinic acids 97, a highly stable diequatorial form of the reactant was preferred over the diaxial form, whereas, in the trans-selective reaction of olefinic amides 97 , the diaxial form in which the substituent adjacent to the dimethylamine moiety does not hinder the electrophilic reaction site was preferred. This selective asymmetric synthesis of cis-lactone 98 was used to achieve the first total synthesis of (+)-dubiusamine C.
Molecules 2020, 25, x FOR PEER REVIEW 25 of 34 treatment of olefinic N,N-dimethylamide 95′ with KI/I2 selectively led to the formation of translactone 96′ (Figure 45b). Unfortunately, the control mechanism of the cis/trans selectivity in these reactions remains unclear. Togo et al. developed the selective asymmetric synthesis of cis-lactones and trans-lactones (98 and 98′) via oxidative bromo-lactonization [99]. This method also exploited the functional differences between the substrates to determine the selectivities of the reactions. Under KBr/Oxone ® conditions, olefinic acid 97 gave cis-lactone 98 as the main product, while olefinic N,N-dimethylamide 97′ preferentially produced trans-lactone 98′ (Figure 46). It was shown that the effect of the solvent on the cis/trans selectivity is negligible [100]. In order to explain the selectivity of each of the reactions, Togo et al. suggested the following reaction mechanism based on the calculation of several transition states involved in the iodo-lactonization processes by Kürth research [101]. In the cis-selective reaction of olefinic acids 97, a highly stable diequatorial form of the reactant was preferred over the diaxial form, whereas, in the trans-selective reaction of olefinic amides 97′, the diaxial form in which the substituent adjacent to the dimethylamine moiety does not hinder the electrophilic reaction site was preferred. This selective asymmetric synthesis of cis-lactone 98 was used to achieve the first total synthesis of (+)-dubiusamine C.    [102]. This method, useful for the synthesis of multi-substituted chiral allenyl lactones, can be used to convert E-enynyl and Z-enynyl acids (99 and 99 ) to syn-bromoallenyl and anti-bromoallenyl lactones (100 and 100 ), respectively ( Figure 47). Perfect enantioselectivity (>99% ee) was achieved for the substrates with chiral substituents. Furthermore, the authors designed a cinchona alkaloid derivative with a tosyl urea group for use as an organocatalyst, which, when used in an enantioselective bromolactonization reaction on a prochiral substrate, successfully produces syn-bromoallenyl lactone from Z-enine [103].
Molecules 2020, 25, x FOR PEER REVIEW 26 of 34 synthesis of multi-substituted chiral allenyl lactones, can be used to convert E-enynyl and Z-enynyl acids (99 and 99′) to syn-bromoallenyl and anti-bromoallenyl lactones (100 and 100′), respectively ( Figure 47). Perfect enantioselectivity (> 99% ee) was achieved for the substrates with chiral substituents. Furthermore, the authors designed a cinchona alkaloid derivative with a tosyl urea group for use as an organocatalyst, which, when used in an enantioselective bromolactonization reaction on a prochiral substrate, successfully produces syn-bromoallenyl lactone from Z-enine [103]. Snowden et al. developed the cis/trans selective dechloro-lactonization of 1-trichloromethyl-1,3diol, which proceeded under basic conditions [104]. Their method stereoselectively produced cisdisubstituted and trans-disubstituted lactones (102 and 102′), respectively, from syn-and anti-1,3diols (101 and 101′), in excellent yields ( Figure 48). In this reaction, the intramolecular cyclization and intermolecular nucleophilic addition reactions were continuous, and either a hydroxyl group or an azide can be introduced as a nucleophile. A conceptual reaction mechanism was proposed in which an epoxide intermediate generated by dechlorination undergoes epoxide ring opening via external nucleophilic attack to generate an acyl chloride, which is an active species involved in lactonization.

Enantioselective Cyclizations
Rousseau et al. reported the exo-bromocycloetherification of E-silylhomoallylic alcohol 103 and its Z-isomer 103′ using bis(sym-collidine)bromine(I) hexafluoroantimonate (Br + (Coll)2SbF6 -) [105]. In the related 4-exo cyclization reaction, there was the problem of the competing 5-endo cyclization, while the introduction of a silyl group to the olefinic moiety contributed toward the high selectivity of the reaction. The cyclization of unsubstituted silyl allylic tertiary alcohols with Br + (Coll)2SbF6 -gave the corresponding single oxetane diastereo-isomers. As a result, (S,S)-and (R,R)-oxetane enantiomers Snowden et al. developed the cis/trans selective dechloro-lactonization of 1-trichloromethyl-1,3-diol, which proceeded under basic conditions [104]. Their method stereoselectively produced cis-disubstituted and trans-disubstituted lactones (102 and 102 ), respectively, from syn-and anti-1,3-diols (101 and 101 ), in excellent yields ( Figure 48). In this reaction, the intramolecular cyclization and intermolecular nucleophilic addition reactions were continuous, and either a hydroxyl group or an azide can be introduced as a nucleophile. A conceptual reaction mechanism was proposed in which an epoxide intermediate generated by dechlorination undergoes epoxide ring opening via external nucleophilic attack to generate an acyl chloride, which is an active species involved in lactonization.
Molecules 2020, 25, x FOR PEER REVIEW 26 of 34 synthesis of multi-substituted chiral allenyl lactones, can be used to convert E-enynyl and Z-enynyl acids (99 and 99′) to syn-bromoallenyl and anti-bromoallenyl lactones (100 and 100′), respectively ( Figure 47). Perfect enantioselectivity (> 99% ee) was achieved for the substrates with chiral substituents. Furthermore, the authors designed a cinchona alkaloid derivative with a tosyl urea group for use as an organocatalyst, which, when used in an enantioselective bromolactonization reaction on a prochiral substrate, successfully produces syn-bromoallenyl lactone from Z-enine [103]. Snowden et al. developed the cis/trans selective dechloro-lactonization of 1-trichloromethyl-1,3diol, which proceeded under basic conditions [104]. Their method stereoselectively produced cisdisubstituted and trans-disubstituted lactones (102 and 102′), respectively, from syn-and anti-1,3diols (101 and 101′), in excellent yields ( Figure 48). In this reaction, the intramolecular cyclization and intermolecular nucleophilic addition reactions were continuous, and either a hydroxyl group or an azide can be introduced as a nucleophile. A conceptual reaction mechanism was proposed in which an epoxide intermediate generated by dechlorination undergoes epoxide ring opening via external nucleophilic attack to generate an acyl chloride, which is an active species involved in lactonization.

Enantioselective Cyclizations
Rousseau et al. reported the exo-bromocycloetherification of E-silylhomoallylic alcohol 103 and its Z-isomer 103′ using bis(sym-collidine)bromine(I) hexafluoroantimonate (Br + (Coll)2SbF6 -) [105]. In the related 4-exo cyclization reaction, there was the problem of the competing 5-endo cyclization, while the introduction of a silyl group to the olefinic moiety contributed toward the high selectivity of the reaction. The cyclization of unsubstituted silyl allylic tertiary alcohols with Br + (Coll)2SbF6 -gave the corresponding single oxetane diastereo-isomers. As a result, (S,S)-and (R,R)-oxetane enantiomers
In the related 4-exo cyclization reaction, there was the problem of the competing 5-endo cyclization, while the introduction of a silyl group to the olefinic moiety contributed toward the high selectivity of the reaction. The cyclization of unsubstituted silyl allylic tertiary alcohols with Br + (Coll) 2 SbF 6 gave the corresponding single oxetane diastereo-isomers. As a result, (S,S)-and (R,R)-oxetane enantiomers 104, as well as (S,R)-and (R,S)-oxetane enantiomers 104 , were obtained from E-silyl homoallylic alcohol 103 and its Z-isomer 103 , respectively ( Figure 49). It is possible to utilize this method for the formation of iodooxetane, but it has been found to result in low product yields.
Molecules 2020, 25, x FOR PEER REVIEW  27 of 34 104, as well as (S,R)-and (R,S)-oxetane enantiomers 104′, were obtained from E-silyl homoallylic alcohol 103 and its Z-isomer 103′, respectively ( Figure 49). It is possible to utilize this method for the formation of iodooxetane, but it has been found to result in low product yields.  A chiral phosphate organocatalyst developed by Shi group was used to conduct enantioselective O-bromocyclizations and N-bromocyclizations [107]. Bromocyclization of E-olefinic and Z-olefinic alcohols (107 and 107′) and amines (109 and 109′) enantio-selectively produced exo-cyclized tetrahydrofurans (108 and 108′) and pyrrolidines (110 and 110′), respectively ( Figure 51). The disadvantage of the reactions is that they require long reaction times of around three days. The authors proposed that the phosphate site of this catalyst can activate both the electrophile (NBS) and nucleophiles (substrates) via hydrogen bonding. In the bromocyclization of olefinic amines, hydrogen bonding and the steric interaction of the N-protecting group can be interpreted as contributing to the orientation of the substrates. Denmark and Burk independently developed the same catalyst, and reported a method that can be used for the enantioselective bromo-cycloetherification of olefinic alcohols in a relatively short time in which the catalytic mechanism is different from that reported by the Shi group [108]. 104, as well as (S,R)-and (R,S)-oxetane enantiomers 104′, were obtained from E-silyl homoallylic alcohol 103 and its Z-isomer 103′, respectively ( Figure 49). It is possible to utilize this method for the formation of iodooxetane, but it has been found to result in low product yields.  A chiral phosphate organocatalyst developed by Shi group was used to conduct enantioselective O-bromocyclizations and N-bromocyclizations [107]. Bromocyclization of E-olefinic and Z-olefinic alcohols (107 and 107′) and amines (109 and 109′) enantio-selectively produced exo-cyclized tetrahydrofurans (108 and 108′) and pyrrolidines (110 and 110′), respectively ( Figure 51). The disadvantage of the reactions is that they require long reaction times of around three days. The authors proposed that the phosphate site of this catalyst can activate both the electrophile (NBS) and nucleophiles (substrates) via hydrogen bonding. In the bromocyclization of olefinic amines, hydrogen bonding and the steric interaction of the N-protecting group can be interpreted as contributing to the orientation of the substrates. Denmark and Burk independently developed the same catalyst, and reported a method that can be used for the enantioselective bromo-cycloetherification of olefinic alcohols in a relatively short time in which the catalytic mechanism is different from that reported by the Shi group [108]. A chiral phosphate organocatalyst developed by Shi group was used to conduct enantioselective O-bromocyclizations and N-bromocyclizations [107]. Bromocyclization of E-olefinic and Z-olefinic alcohols (107 and 107 ) and amines (109 and 109 ) enantio-selectively produced exo-cyclized tetra-hydrofurans (108 and 108 ) and pyrrolidines (110 and 110 ), respectively ( Figure 51). The disadvantage of the reactions is that they require long reaction times of around three days. The authors proposed that the phosphate site of this catalyst can activate both the electrophile (NBS) and nucleophiles (substrates) via hydrogen bonding. In the bromocyclization of olefinic amines, hydrogen bonding and the steric interaction of the N-protecting group can be interpreted as contributing to the orientation of the substrates. Denmark and Burk independently developed the same catalyst, and reported a method that can be used for the enantioselective bromo-cyclo-etherification of olefinic alcohols in a relatively short time in which the catalytic mechanism is different from that reported by the Shi group [108].

Other Miscellaneous Reactions
Lupton and co-workers reported a method for the selective synthesis of oxabicyclic

Other Miscellaneous Reactions
Lupton and co-workers reported a method for the selective synthesis of oxabicyclic    [110]. Oxazolidine-2,4-diones 114 were obtained by exo-type iodolactonizations of N-Boc N-arylacrylamides 113, while oxindoles 114 were prepared by exo-type iodocarbocyclizations of N-alkyl N-arylacrylamides 113 ( Figure 53). Similar treatment of N-Boc N-arylacrylamides with 1,1-disubsituted moieties led to the formation of endo-type iodo-carbo-cyclizations. In this study, the authors also demonstrated that the obtained products are useful synthetic intermediates for bioactive compounds, such as toloxatone, (±)-esermethiole, and (±)-physostigmine. Similar treatment of N-Boc N-arylacrylamides with 1,1-disubsituted moieties led to the formation of endo-type iodo-carbo-cyclizations. In this study, the authors also demonstrated that the obtained products are useful synthetic intermediates for bioactive compounds, such as toloxatone, (±)esermethiole, and (±)-physostigmine.

Conclusions
In this review, we have focused on controllable cyclization reactions that are very useful for the formations of skeletons from various molecules in order to further expand the versatility of halogendependent reactions for heterocycle synthesis. In this article, these controllable reactions are categorized into reagent-switchable and substrate-switchable reaction types. There are many benefits to these reactions that have been described herein, so it is expected that these reactions are very practical to use. All of the strategies exhibit high product selectivities and there are options in terms of reagent and substrate controls to allow flexibility in the formation of the skeletons of organic molecules.
The endo/exo selectivity of halocyclization reactions has been of interest since the middle of the 20 th century with recent rapid progress in this area. Although exo-cyclization is potentially favored in halocyclization reactions, the fact that endo-cyclization can selectively proceed is a great advantage. In addition, the development of organocatalysts for use in controllable stereoselective cyclizations has become an important basis for possible further developments in this area. Regioselective and stereoselective introductions of halogen atoms are powerful tools to aid the successful construction of target molecules. The discovery of new intermediates that trigger the reactions of saturated substrates could be the key to boosting innovative syntheses. However, further efforts are needed to elucidate the reaction mechanisms mentioned in this review that remain unknown. In recent years, green chemistry-directed, recyclable hypervalent iodine reagents and catalysts have been under rapid development. As a future topic, their further contribution to halogencontrolled intramolecular cyclizations is strongly desired. Therefore, this review provides appropriate literature and concepts for synthetic chemists engaged in heterocycle synthesis and for brave pioneers in next-generation reaction development in organic synthesis.

Conclusions
In this review, we have focused on controllable cyclization reactions that are very useful for the formations of skeletons from various molecules in order to further expand the versatility of halogen-dependent reactions for heterocycle synthesis. In this article, these controllable reactions are categorized into reagent-switchable and substrate-switchable reaction types. There are many benefits to these reactions that have been described herein, so it is expected that these reactions are very practical to use. All of the strategies exhibit high product selectivities and there are options in terms of reagent and substrate controls to allow flexibility in the formation of the skeletons of organic molecules.
The endo/exo selectivity of halocyclization reactions has been of interest since the middle of the 20th century with recent rapid progress in this area. Although exo-cyclization is potentially favored in halocyclization reactions, the fact that endo-cyclization can selectively proceed is a great advantage. In addition, the development of organocatalysts for use in controllable stereoselective cyclizations has become an important basis for possible further developments in this area. Regioselective and stereoselective introductions of halogen atoms are powerful tools to aid the successful construction of target molecules. The discovery of new intermediates that trigger the reactions of saturated substrates could be the key to boosting innovative syntheses. However, further efforts are needed to elucidate the reaction mechanisms mentioned in this review that remain unknown. In recent years, green chemistry-directed, recyclable hypervalent iodine reagents and catalysts have been under rapid development. As a future topic, their further contribution to halogen-controlled intramolecular cyclizations is strongly desired. Therefore, this review provides appropriate literature and concepts for synthetic chemists engaged in heterocycle synthesis and for brave pioneers in next-generation reaction development in organic synthesis.

Conflicts of Interest:
The authors declare no conflict of interest.